mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 10:46:40 +07:00
9ffc93f203
Remove all #inclusions of asm/system.h preparatory to splitting and killing it. Performed with the following command: perl -p -i -e 's!^#\s*include\s*<asm/system[.]h>.*\n!!' `grep -Irl '^#\s*include\s*<asm/system[.]h>' *` Signed-off-by: David Howells <dhowells@redhat.com>
1211 lines
36 KiB
C
1211 lines
36 KiB
C
/*
|
|
* ultrastor.c Copyright (C) 1992 David B. Gentzel
|
|
* Low-level SCSI driver for UltraStor 14F, 24F, and 34F
|
|
* by David B. Gentzel, Whitfield Software Services, Carnegie, PA
|
|
* (gentzel@nova.enet.dec.com)
|
|
* scatter/gather added by Scott Taylor (n217cg@tamuts.tamu.edu)
|
|
* 24F and multiple command support by John F. Carr (jfc@athena.mit.edu)
|
|
* John's work modified by Caleb Epstein (cae@jpmorgan.com) and
|
|
* Eric Youngdale (ericy@cais.com).
|
|
* Thanks to UltraStor for providing the necessary documentation
|
|
*
|
|
* This is an old driver, for the 14F and 34F you should be using the
|
|
* u14-34f driver instead.
|
|
*/
|
|
|
|
/*
|
|
* TODO:
|
|
* 1. Find out why scatter/gather is limited to 16 requests per command.
|
|
* This is fixed, at least on the 24F, as of version 1.12 - CAE.
|
|
* 2. Look at command linking (mscp.command_link and
|
|
* mscp.command_link_id). (Does not work with many disks,
|
|
* and no performance increase. ERY).
|
|
* 3. Allow multiple adapters.
|
|
*/
|
|
|
|
/*
|
|
* NOTES:
|
|
* The UltraStor 14F, 24F, and 34F are a family of intelligent, high
|
|
* performance SCSI-2 host adapters. They all support command queueing
|
|
* and scatter/gather I/O. Some of them can also emulate the standard
|
|
* WD1003 interface for use with OS's which don't support SCSI. Here
|
|
* is the scoop on the various models:
|
|
* 14F - ISA first-party DMA HA with floppy support and WD1003 emulation.
|
|
* 14N - ISA HA with floppy support. I think that this is a non-DMA
|
|
* HA. Nothing further known.
|
|
* 24F - EISA Bus Master HA with floppy support and WD1003 emulation.
|
|
* 34F - VL-Bus Bus Master HA with floppy support (no WD1003 emulation).
|
|
*
|
|
* The 14F, 24F, and 34F are supported by this driver.
|
|
*
|
|
* Places flagged with a triple question-mark are things which are either
|
|
* unfinished, questionable, or wrong.
|
|
*/
|
|
|
|
/* Changes from version 1.11 alpha to 1.12
|
|
*
|
|
* Increased the size of the scatter-gather list to 33 entries for
|
|
* the 24F adapter (it was 16). I don't have the specs for the 14F
|
|
* or the 34F, so they may support larger s-g lists as well.
|
|
*
|
|
* Caleb Epstein <cae@jpmorgan.com>
|
|
*/
|
|
|
|
/* Changes from version 1.9 to 1.11
|
|
*
|
|
* Patches to bring this driver up to speed with the default kernel
|
|
* driver which supports only the 14F and 34F adapters. This version
|
|
* should compile cleanly into 0.99.13, 0.99.12 and probably 0.99.11.
|
|
*
|
|
* Fixes from Eric Youngdale to fix a few possible race conditions and
|
|
* several problems with bit testing operations (insufficient
|
|
* parentheses).
|
|
*
|
|
* Removed the ultrastor_abort() and ultrastor_reset() functions
|
|
* (enclosed them in #if 0 / #endif). These functions, at least on
|
|
* the 24F, cause the SCSI bus to do odd things and generally lead to
|
|
* kernel panics and machine hangs. This is like the Adaptec code.
|
|
*
|
|
* Use check/snarf_region for 14f, 34f to avoid I/O space address conflicts.
|
|
*/
|
|
|
|
/* Changes from version 1.8 to version 1.9
|
|
*
|
|
* 0.99.11 patches (cae@jpmorgan.com) */
|
|
|
|
/* Changes from version 1.7 to version 1.8
|
|
*
|
|
* Better error reporting.
|
|
*/
|
|
|
|
/* Changes from version 1.6 to version 1.7
|
|
*
|
|
* Removed CSIR command code.
|
|
*
|
|
* Better race condition avoidance (xchgb function added).
|
|
*
|
|
* Set ICM and OGM status to zero at probe (24F)
|
|
*
|
|
* reset sends soft reset to UltraStor adapter
|
|
*
|
|
* reset adapter if adapter interrupts with an invalid MSCP address
|
|
*
|
|
* handle aborted command interrupt (24F)
|
|
*
|
|
*/
|
|
|
|
/* Changes from version 1.5 to version 1.6:
|
|
*
|
|
* Read MSCP address from ICM _before_ clearing the interrupt flag.
|
|
* This fixes a race condition.
|
|
*/
|
|
|
|
/* Changes from version 1.4 to version 1.5:
|
|
*
|
|
* Abort now calls done when multiple commands are enabled.
|
|
*
|
|
* Clear busy when aborted command finishes, not when abort is called.
|
|
*
|
|
* More debugging messages for aborts.
|
|
*/
|
|
|
|
/* Changes from version 1.3 to version 1.4:
|
|
*
|
|
* Enable automatic request of sense data on error (requires newer version
|
|
* of scsi.c to be useful).
|
|
*
|
|
* Fix PORT_OVERRIDE for 14F.
|
|
*
|
|
* Fix abort and reset to work properly (config.aborted wasn't cleared
|
|
* after it was tested, so after a command abort no further commands would
|
|
* work).
|
|
*
|
|
* Boot time test to enable SCSI bus reset (defaults to not allowing reset).
|
|
*
|
|
* Fix test for OGM busy -- the busy bit is in different places on the 24F.
|
|
*
|
|
* Release ICM slot by clearing first byte on 24F.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/string.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/stat.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/dma.h>
|
|
|
|
#define ULTRASTOR_PRIVATE /* Get the private stuff from ultrastor.h */
|
|
#include "scsi.h"
|
|
#include <scsi/scsi_host.h>
|
|
#include "ultrastor.h"
|
|
|
|
#define FALSE 0
|
|
#define TRUE 1
|
|
|
|
#ifndef ULTRASTOR_DEBUG
|
|
#define ULTRASTOR_DEBUG (UD_ABORT|UD_CSIR|UD_RESET)
|
|
#endif
|
|
|
|
#define VERSION "1.12"
|
|
|
|
#define PACKED __attribute__((packed))
|
|
#define ALIGNED(x) __attribute__((aligned(x)))
|
|
|
|
|
|
/* The 14F uses an array of 4-byte ints for its scatter/gather list.
|
|
The data can be unaligned, but need not be. It's easier to give
|
|
the list normal alignment since it doesn't need to fit into a
|
|
packed structure. */
|
|
|
|
typedef struct {
|
|
u32 address;
|
|
u32 num_bytes;
|
|
} ultrastor_sg_list;
|
|
|
|
|
|
/* MailBox SCSI Command Packet. Basic command structure for communicating
|
|
with controller. */
|
|
struct mscp {
|
|
unsigned char opcode: 3; /* type of command */
|
|
unsigned char xdir: 2; /* data transfer direction */
|
|
unsigned char dcn: 1; /* disable disconnect */
|
|
unsigned char ca: 1; /* use cache (if available) */
|
|
unsigned char sg: 1; /* scatter/gather operation */
|
|
unsigned char target_id: 3; /* target SCSI id */
|
|
unsigned char ch_no: 2; /* SCSI channel (always 0 for 14f) */
|
|
unsigned char lun: 3; /* logical unit number */
|
|
unsigned int transfer_data PACKED; /* transfer data pointer */
|
|
unsigned int transfer_data_length PACKED; /* length in bytes */
|
|
unsigned int command_link PACKED; /* for linking command chains */
|
|
unsigned char scsi_command_link_id; /* identifies command in chain */
|
|
unsigned char number_of_sg_list; /* (if sg is set) 8 bytes per list */
|
|
unsigned char length_of_sense_byte;
|
|
unsigned char length_of_scsi_cdbs; /* 6, 10, or 12 */
|
|
unsigned char scsi_cdbs[12]; /* SCSI commands */
|
|
unsigned char adapter_status; /* non-zero indicates HA error */
|
|
unsigned char target_status; /* non-zero indicates target error */
|
|
u32 sense_data PACKED;
|
|
/* The following fields are for software only. They are included in
|
|
the MSCP structure because they are associated with SCSI requests. */
|
|
void (*done) (struct scsi_cmnd *);
|
|
struct scsi_cmnd *SCint;
|
|
ultrastor_sg_list sglist[ULTRASTOR_24F_MAX_SG]; /* use larger size for 24F */
|
|
};
|
|
|
|
|
|
/* Port addresses (relative to the base address) */
|
|
#define U14F_PRODUCT_ID(port) ((port) + 0x4)
|
|
#define CONFIG(port) ((port) + 0x6)
|
|
|
|
/* Port addresses relative to the doorbell base address. */
|
|
#define LCL_DOORBELL_MASK(port) ((port) + 0x0)
|
|
#define LCL_DOORBELL_INTR(port) ((port) + 0x1)
|
|
#define SYS_DOORBELL_MASK(port) ((port) + 0x2)
|
|
#define SYS_DOORBELL_INTR(port) ((port) + 0x3)
|
|
|
|
|
|
/* Used to store configuration info read from config i/o registers. Most of
|
|
this is not used yet, but might as well save it.
|
|
|
|
This structure also holds port addresses that are not at the same offset
|
|
on the 14F and 24F.
|
|
|
|
This structure holds all data that must be duplicated to support multiple
|
|
adapters. */
|
|
|
|
static struct ultrastor_config
|
|
{
|
|
unsigned short port_address; /* base address of card */
|
|
unsigned short doorbell_address; /* base address of doorbell CSRs */
|
|
unsigned short ogm_address; /* base address of OGM */
|
|
unsigned short icm_address; /* base address of ICM */
|
|
const void *bios_segment;
|
|
unsigned char interrupt: 4;
|
|
unsigned char dma_channel: 3;
|
|
unsigned char bios_drive_number: 1;
|
|
unsigned char heads;
|
|
unsigned char sectors;
|
|
unsigned char ha_scsi_id: 3;
|
|
unsigned char subversion: 4;
|
|
unsigned char revision;
|
|
/* The slot number is used to distinguish the 24F (slot != 0) from
|
|
the 14F and 34F (slot == 0). */
|
|
unsigned char slot;
|
|
|
|
#ifdef PRINT_U24F_VERSION
|
|
volatile int csir_done;
|
|
#endif
|
|
|
|
/* A pool of MSCP structures for this adapter, and a bitmask of
|
|
busy structures. (If ULTRASTOR_14F_MAX_CMDS == 1, a 1 byte
|
|
busy flag is used instead.) */
|
|
|
|
#if ULTRASTOR_MAX_CMDS == 1
|
|
unsigned char mscp_busy;
|
|
#else
|
|
unsigned long mscp_free;
|
|
#endif
|
|
volatile unsigned char aborted[ULTRASTOR_MAX_CMDS];
|
|
struct mscp mscp[ULTRASTOR_MAX_CMDS];
|
|
} config = {0};
|
|
|
|
/* Set this to 1 to reset the SCSI bus on error. */
|
|
static int ultrastor_bus_reset;
|
|
|
|
|
|
/* Allowed BIOS base addresses (NULL indicates reserved) */
|
|
static const void *const bios_segment_table[8] = {
|
|
NULL, (void *)0xC4000, (void *)0xC8000, (void *)0xCC000,
|
|
(void *)0xD0000, (void *)0xD4000, (void *)0xD8000, (void *)0xDC000,
|
|
};
|
|
|
|
/* Allowed IRQs for 14f */
|
|
static const unsigned char interrupt_table_14f[4] = { 15, 14, 11, 10 };
|
|
|
|
/* Allowed DMA channels for 14f (0 indicates reserved) */
|
|
static const unsigned char dma_channel_table_14f[4] = { 5, 6, 7, 0 };
|
|
|
|
/* Head/sector mappings allowed by 14f */
|
|
static const struct {
|
|
unsigned char heads;
|
|
unsigned char sectors;
|
|
} mapping_table[4] = { { 16, 63 }, { 64, 32 }, { 64, 63 }, { 64, 32 } };
|
|
|
|
#ifndef PORT_OVERRIDE
|
|
/* ??? A probe of address 0x310 screws up NE2000 cards */
|
|
static const unsigned short ultrastor_ports_14f[] = {
|
|
0x330, 0x340, /*0x310,*/ 0x230, 0x240, 0x210, 0x130, 0x140,
|
|
};
|
|
#endif
|
|
|
|
static void ultrastor_interrupt(void *);
|
|
static irqreturn_t do_ultrastor_interrupt(int, void *);
|
|
static inline void build_sg_list(struct mscp *, struct scsi_cmnd *SCpnt);
|
|
|
|
|
|
/* Always called with host lock held */
|
|
|
|
static inline int find_and_clear_bit_16(unsigned long *field)
|
|
{
|
|
int rv;
|
|
|
|
if (*field == 0)
|
|
panic("No free mscp");
|
|
|
|
asm volatile (
|
|
"xorl %0,%0\n\t"
|
|
"0: bsfw %1,%w0\n\t"
|
|
"btr %0,%1\n\t"
|
|
"jnc 0b"
|
|
: "=&r" (rv), "+m" (*field) :);
|
|
|
|
return rv;
|
|
}
|
|
|
|
/* This has been re-implemented with the help of Richard Earnshaw,
|
|
<rwe@pegasus.esprit.ec.org> and works with gcc-2.5.8 and gcc-2.6.0.
|
|
The instability noted by jfc below appears to be a bug in
|
|
gcc-2.5.x when compiling w/o optimization. --Caleb
|
|
|
|
This asm is fragile: it doesn't work without the casts and it may
|
|
not work without optimization. Maybe I should add a swap builtin
|
|
to gcc. --jfc */
|
|
static inline unsigned char xchgb(unsigned char reg,
|
|
volatile unsigned char *mem)
|
|
{
|
|
__asm__ ("xchgb %0,%1" : "=q" (reg), "=m" (*mem) : "0" (reg));
|
|
return reg;
|
|
}
|
|
|
|
#if ULTRASTOR_DEBUG & (UD_COMMAND | UD_ABORT)
|
|
|
|
/* Always called with the host lock held */
|
|
static void log_ultrastor_abort(struct ultrastor_config *config,
|
|
int command)
|
|
{
|
|
static char fmt[80] = "abort %d (%x); MSCP free pool: %x;";
|
|
int i;
|
|
|
|
for (i = 0; i < ULTRASTOR_MAX_CMDS; i++)
|
|
{
|
|
fmt[20 + i*2] = ' ';
|
|
if (! (config->mscp_free & (1 << i)))
|
|
fmt[21 + i*2] = '0' + config->mscp[i].target_id;
|
|
else
|
|
fmt[21 + i*2] = '-';
|
|
}
|
|
fmt[20 + ULTRASTOR_MAX_CMDS * 2] = '\n';
|
|
fmt[21 + ULTRASTOR_MAX_CMDS * 2] = 0;
|
|
printk(fmt, command, &config->mscp[command], config->mscp_free);
|
|
|
|
}
|
|
#endif
|
|
|
|
static int ultrastor_14f_detect(struct scsi_host_template * tpnt)
|
|
{
|
|
size_t i;
|
|
unsigned char in_byte, version_byte = 0;
|
|
struct config_1 {
|
|
unsigned char bios_segment: 3;
|
|
unsigned char removable_disks_as_fixed: 1;
|
|
unsigned char interrupt: 2;
|
|
unsigned char dma_channel: 2;
|
|
} config_1;
|
|
struct config_2 {
|
|
unsigned char ha_scsi_id: 3;
|
|
unsigned char mapping_mode: 2;
|
|
unsigned char bios_drive_number: 1;
|
|
unsigned char tfr_port: 2;
|
|
} config_2;
|
|
|
|
#if (ULTRASTOR_DEBUG & UD_DETECT)
|
|
printk("US14F: detect: called\n");
|
|
#endif
|
|
|
|
/* If a 24F has already been configured, don't look for a 14F. */
|
|
if (config.bios_segment)
|
|
return FALSE;
|
|
|
|
#ifdef PORT_OVERRIDE
|
|
if(!request_region(PORT_OVERRIDE, 0xc, "ultrastor")) {
|
|
printk("Ultrastor I/O space already in use\n");
|
|
return FALSE;
|
|
};
|
|
config.port_address = PORT_OVERRIDE;
|
|
#else
|
|
for (i = 0; i < ARRAY_SIZE(ultrastor_ports_14f); i++) {
|
|
if(!request_region(ultrastor_ports_14f[i], 0x0c, "ultrastor")) continue;
|
|
config.port_address = ultrastor_ports_14f[i];
|
|
#endif
|
|
|
|
#if (ULTRASTOR_DEBUG & UD_DETECT)
|
|
printk("US14F: detect: testing port address %03X\n", config.port_address);
|
|
#endif
|
|
|
|
in_byte = inb(U14F_PRODUCT_ID(config.port_address));
|
|
if (in_byte != US14F_PRODUCT_ID_0) {
|
|
#if (ULTRASTOR_DEBUG & UD_DETECT)
|
|
# ifdef PORT_OVERRIDE
|
|
printk("US14F: detect: wrong product ID 0 - %02X\n", in_byte);
|
|
# else
|
|
printk("US14F: detect: no adapter at port %03X\n", config.port_address);
|
|
# endif
|
|
#endif
|
|
#ifdef PORT_OVERRIDE
|
|
goto out_release_port;
|
|
#else
|
|
release_region(config.port_address, 0x0c);
|
|
continue;
|
|
#endif
|
|
}
|
|
in_byte = inb(U14F_PRODUCT_ID(config.port_address) + 1);
|
|
/* Only upper nibble is significant for Product ID 1 */
|
|
if ((in_byte & 0xF0) != US14F_PRODUCT_ID_1) {
|
|
#if (ULTRASTOR_DEBUG & UD_DETECT)
|
|
# ifdef PORT_OVERRIDE
|
|
printk("US14F: detect: wrong product ID 1 - %02X\n", in_byte);
|
|
# else
|
|
printk("US14F: detect: no adapter at port %03X\n", config.port_address);
|
|
# endif
|
|
#endif
|
|
#ifdef PORT_OVERRIDE
|
|
goto out_release_port;
|
|
#else
|
|
release_region(config.port_address, 0x0c);
|
|
continue;
|
|
#endif
|
|
}
|
|
version_byte = in_byte;
|
|
#ifndef PORT_OVERRIDE
|
|
break;
|
|
}
|
|
if (i == ARRAY_SIZE(ultrastor_ports_14f)) {
|
|
# if (ULTRASTOR_DEBUG & UD_DETECT)
|
|
printk("US14F: detect: no port address found!\n");
|
|
# endif
|
|
/* all ports probed already released - we can just go straight out */
|
|
return FALSE;
|
|
}
|
|
#endif
|
|
|
|
#if (ULTRASTOR_DEBUG & UD_DETECT)
|
|
printk("US14F: detect: adapter found at port address %03X\n",
|
|
config.port_address);
|
|
#endif
|
|
|
|
/* Set local doorbell mask to disallow bus reset unless
|
|
ultrastor_bus_reset is true. */
|
|
outb(ultrastor_bus_reset ? 0xc2 : 0x82, LCL_DOORBELL_MASK(config.port_address));
|
|
|
|
/* All above tests passed, must be the right thing. Get some useful
|
|
info. */
|
|
|
|
/* Register the I/O space that we use */
|
|
|
|
*(char *)&config_1 = inb(CONFIG(config.port_address + 0));
|
|
*(char *)&config_2 = inb(CONFIG(config.port_address + 1));
|
|
config.bios_segment = bios_segment_table[config_1.bios_segment];
|
|
config.doorbell_address = config.port_address;
|
|
config.ogm_address = config.port_address + 0x8;
|
|
config.icm_address = config.port_address + 0xC;
|
|
config.interrupt = interrupt_table_14f[config_1.interrupt];
|
|
config.ha_scsi_id = config_2.ha_scsi_id;
|
|
config.heads = mapping_table[config_2.mapping_mode].heads;
|
|
config.sectors = mapping_table[config_2.mapping_mode].sectors;
|
|
config.bios_drive_number = config_2.bios_drive_number;
|
|
config.subversion = (version_byte & 0x0F);
|
|
if (config.subversion == U34F)
|
|
config.dma_channel = 0;
|
|
else
|
|
config.dma_channel = dma_channel_table_14f[config_1.dma_channel];
|
|
|
|
if (!config.bios_segment) {
|
|
#if (ULTRASTOR_DEBUG & UD_DETECT)
|
|
printk("US14F: detect: not detected.\n");
|
|
#endif
|
|
goto out_release_port;
|
|
}
|
|
|
|
/* Final consistency check, verify previous info. */
|
|
if (config.subversion != U34F)
|
|
if (!config.dma_channel || !(config_2.tfr_port & 0x2)) {
|
|
#if (ULTRASTOR_DEBUG & UD_DETECT)
|
|
printk("US14F: detect: consistency check failed\n");
|
|
#endif
|
|
goto out_release_port;
|
|
}
|
|
|
|
/* If we were TRULY paranoid, we could issue a host adapter inquiry
|
|
command here and verify the data returned. But frankly, I'm
|
|
exhausted! */
|
|
|
|
/* Finally! Now I'm satisfied... */
|
|
#if (ULTRASTOR_DEBUG & UD_DETECT)
|
|
printk("US14F: detect: detect succeeded\n"
|
|
" Port address: %03X\n"
|
|
" BIOS segment: %05X\n"
|
|
" Interrupt: %u\n"
|
|
" DMA channel: %u\n"
|
|
" H/A SCSI ID: %u\n"
|
|
" Subversion: %u\n",
|
|
config.port_address, config.bios_segment, config.interrupt,
|
|
config.dma_channel, config.ha_scsi_id, config.subversion);
|
|
#endif
|
|
tpnt->this_id = config.ha_scsi_id;
|
|
tpnt->unchecked_isa_dma = (config.subversion != U34F);
|
|
|
|
#if ULTRASTOR_MAX_CMDS > 1
|
|
config.mscp_free = ~0;
|
|
#endif
|
|
|
|
/*
|
|
* Brrr, &config.mscp[0].SCint->host) it is something magical....
|
|
* XXX and FIXME
|
|
*/
|
|
if (request_irq(config.interrupt, do_ultrastor_interrupt, 0, "Ultrastor", &config.mscp[0].SCint->device->host)) {
|
|
printk("Unable to allocate IRQ%u for UltraStor controller.\n",
|
|
config.interrupt);
|
|
goto out_release_port;
|
|
}
|
|
if (config.dma_channel && request_dma(config.dma_channel,"Ultrastor")) {
|
|
printk("Unable to allocate DMA channel %u for UltraStor controller.\n",
|
|
config.dma_channel);
|
|
free_irq(config.interrupt, NULL);
|
|
goto out_release_port;
|
|
}
|
|
tpnt->sg_tablesize = ULTRASTOR_14F_MAX_SG;
|
|
printk("UltraStor driver version" VERSION ". Using %d SG lists.\n",
|
|
ULTRASTOR_14F_MAX_SG);
|
|
|
|
return TRUE;
|
|
out_release_port:
|
|
release_region(config.port_address, 0x0c);
|
|
return FALSE;
|
|
}
|
|
|
|
static int ultrastor_24f_detect(struct scsi_host_template * tpnt)
|
|
{
|
|
int i;
|
|
struct Scsi_Host * shpnt = NULL;
|
|
|
|
#if (ULTRASTOR_DEBUG & UD_DETECT)
|
|
printk("US24F: detect");
|
|
#endif
|
|
|
|
/* probe each EISA slot at slot address C80 */
|
|
for (i = 1; i < 15; i++)
|
|
{
|
|
unsigned char config_1, config_2;
|
|
unsigned short addr = (i << 12) | ULTRASTOR_24F_PORT;
|
|
|
|
if (inb(addr) != US24F_PRODUCT_ID_0 &&
|
|
inb(addr+1) != US24F_PRODUCT_ID_1 &&
|
|
inb(addr+2) != US24F_PRODUCT_ID_2)
|
|
continue;
|
|
|
|
config.revision = inb(addr+3);
|
|
config.slot = i;
|
|
if (! (inb(addr+4) & 1))
|
|
{
|
|
#if (ULTRASTOR_DEBUG & UD_DETECT)
|
|
printk("U24F: found disabled card in slot %u\n", i);
|
|
#endif
|
|
continue;
|
|
}
|
|
#if (ULTRASTOR_DEBUG & UD_DETECT)
|
|
printk("U24F: found card in slot %u\n", i);
|
|
#endif
|
|
config_1 = inb(addr + 5);
|
|
config.bios_segment = bios_segment_table[config_1 & 7];
|
|
switch(config_1 >> 4)
|
|
{
|
|
case 1:
|
|
config.interrupt = 15;
|
|
break;
|
|
case 2:
|
|
config.interrupt = 14;
|
|
break;
|
|
case 4:
|
|
config.interrupt = 11;
|
|
break;
|
|
case 8:
|
|
config.interrupt = 10;
|
|
break;
|
|
default:
|
|
printk("U24F: invalid IRQ\n");
|
|
return FALSE;
|
|
}
|
|
|
|
/* BIOS addr set */
|
|
/* base port set */
|
|
config.port_address = addr;
|
|
config.doorbell_address = addr + 12;
|
|
config.ogm_address = addr + 0x17;
|
|
config.icm_address = addr + 0x1C;
|
|
config_2 = inb(addr + 7);
|
|
config.ha_scsi_id = config_2 & 7;
|
|
config.heads = mapping_table[(config_2 >> 3) & 3].heads;
|
|
config.sectors = mapping_table[(config_2 >> 3) & 3].sectors;
|
|
#if (ULTRASTOR_DEBUG & UD_DETECT)
|
|
printk("US24F: detect: detect succeeded\n"
|
|
" Port address: %03X\n"
|
|
" BIOS segment: %05X\n"
|
|
" Interrupt: %u\n"
|
|
" H/A SCSI ID: %u\n",
|
|
config.port_address, config.bios_segment,
|
|
config.interrupt, config.ha_scsi_id);
|
|
#endif
|
|
tpnt->this_id = config.ha_scsi_id;
|
|
tpnt->unchecked_isa_dma = 0;
|
|
tpnt->sg_tablesize = ULTRASTOR_24F_MAX_SG;
|
|
|
|
shpnt = scsi_register(tpnt, 0);
|
|
if (!shpnt) {
|
|
printk(KERN_WARNING "(ultrastor:) Could not register scsi device. Aborting registration.\n");
|
|
free_irq(config.interrupt, do_ultrastor_interrupt);
|
|
return FALSE;
|
|
}
|
|
|
|
if (request_irq(config.interrupt, do_ultrastor_interrupt, 0, "Ultrastor", shpnt))
|
|
{
|
|
printk("Unable to allocate IRQ%u for UltraStor controller.\n",
|
|
config.interrupt);
|
|
return FALSE;
|
|
}
|
|
|
|
shpnt->irq = config.interrupt;
|
|
shpnt->dma_channel = config.dma_channel;
|
|
shpnt->io_port = config.port_address;
|
|
|
|
#if ULTRASTOR_MAX_CMDS > 1
|
|
config.mscp_free = ~0;
|
|
#endif
|
|
/* Mark ICM and OGM free */
|
|
outb(0, addr + 0x16);
|
|
outb(0, addr + 0x1B);
|
|
|
|
/* Set local doorbell mask to disallow bus reset unless
|
|
ultrastor_bus_reset is true. */
|
|
outb(ultrastor_bus_reset ? 0xc2 : 0x82, LCL_DOORBELL_MASK(addr+12));
|
|
outb(0x02, SYS_DOORBELL_MASK(addr+12));
|
|
printk("UltraStor driver version " VERSION ". Using %d SG lists.\n",
|
|
tpnt->sg_tablesize);
|
|
return TRUE;
|
|
}
|
|
return FALSE;
|
|
}
|
|
|
|
static int ultrastor_detect(struct scsi_host_template * tpnt)
|
|
{
|
|
tpnt->proc_name = "ultrastor";
|
|
return ultrastor_14f_detect(tpnt) || ultrastor_24f_detect(tpnt);
|
|
}
|
|
|
|
static int ultrastor_release(struct Scsi_Host *shost)
|
|
{
|
|
if (shost->irq)
|
|
free_irq(shost->irq, NULL);
|
|
if (shost->dma_channel != 0xff)
|
|
free_dma(shost->dma_channel);
|
|
if (shost->io_port && shost->n_io_port)
|
|
release_region(shost->io_port, shost->n_io_port);
|
|
scsi_unregister(shost);
|
|
return 0;
|
|
}
|
|
|
|
static const char *ultrastor_info(struct Scsi_Host * shpnt)
|
|
{
|
|
static char buf[64];
|
|
|
|
if (config.slot)
|
|
sprintf(buf, "UltraStor 24F SCSI @ Slot %u IRQ%u",
|
|
config.slot, config.interrupt);
|
|
else if (config.subversion)
|
|
sprintf(buf, "UltraStor 34F SCSI @ Port %03X BIOS %05X IRQ%u",
|
|
config.port_address, (int)config.bios_segment,
|
|
config.interrupt);
|
|
else
|
|
sprintf(buf, "UltraStor 14F SCSI @ Port %03X BIOS %05X IRQ%u DMA%u",
|
|
config.port_address, (int)config.bios_segment,
|
|
config.interrupt, config.dma_channel);
|
|
return buf;
|
|
}
|
|
|
|
static inline void build_sg_list(struct mscp *mscp, struct scsi_cmnd *SCpnt)
|
|
{
|
|
struct scatterlist *sg;
|
|
long transfer_length = 0;
|
|
int i, max;
|
|
|
|
max = scsi_sg_count(SCpnt);
|
|
scsi_for_each_sg(SCpnt, sg, max, i) {
|
|
mscp->sglist[i].address = isa_page_to_bus(sg_page(sg)) + sg->offset;
|
|
mscp->sglist[i].num_bytes = sg->length;
|
|
transfer_length += sg->length;
|
|
}
|
|
mscp->number_of_sg_list = max;
|
|
mscp->transfer_data = isa_virt_to_bus(mscp->sglist);
|
|
/* ??? May not be necessary. Docs are unclear as to whether transfer
|
|
length field is ignored or whether it should be set to the total
|
|
number of bytes of the transfer. */
|
|
mscp->transfer_data_length = transfer_length;
|
|
}
|
|
|
|
static int ultrastor_queuecommand_lck(struct scsi_cmnd *SCpnt,
|
|
void (*done) (struct scsi_cmnd *))
|
|
{
|
|
struct mscp *my_mscp;
|
|
#if ULTRASTOR_MAX_CMDS > 1
|
|
int mscp_index;
|
|
#endif
|
|
unsigned int status;
|
|
|
|
/* Next test is for debugging; "can't happen" */
|
|
if ((config.mscp_free & ((1U << ULTRASTOR_MAX_CMDS) - 1)) == 0)
|
|
panic("ultrastor_queuecommand: no free MSCP\n");
|
|
mscp_index = find_and_clear_bit_16(&config.mscp_free);
|
|
|
|
/* Has the command been aborted? */
|
|
if (xchgb(0xff, &config.aborted[mscp_index]) != 0)
|
|
{
|
|
status = DID_ABORT << 16;
|
|
goto aborted;
|
|
}
|
|
|
|
my_mscp = &config.mscp[mscp_index];
|
|
|
|
*(unsigned char *)my_mscp = OP_SCSI | (DTD_SCSI << 3);
|
|
|
|
/* Tape drives don't work properly if the cache is used. The SCSI
|
|
READ command for a tape doesn't have a block offset, and the adapter
|
|
incorrectly assumes that all reads from the tape read the same
|
|
blocks. Results will depend on read buffer size and other disk
|
|
activity.
|
|
|
|
??? Which other device types should never use the cache? */
|
|
my_mscp->ca = SCpnt->device->type != TYPE_TAPE;
|
|
my_mscp->target_id = SCpnt->device->id;
|
|
my_mscp->ch_no = 0;
|
|
my_mscp->lun = SCpnt->device->lun;
|
|
if (scsi_sg_count(SCpnt)) {
|
|
/* Set scatter/gather flag in SCSI command packet */
|
|
my_mscp->sg = TRUE;
|
|
build_sg_list(my_mscp, SCpnt);
|
|
} else {
|
|
/* Unset scatter/gather flag in SCSI command packet */
|
|
my_mscp->sg = FALSE;
|
|
my_mscp->transfer_data = isa_virt_to_bus(scsi_sglist(SCpnt));
|
|
my_mscp->transfer_data_length = scsi_bufflen(SCpnt);
|
|
}
|
|
my_mscp->command_link = 0; /*???*/
|
|
my_mscp->scsi_command_link_id = 0; /*???*/
|
|
my_mscp->length_of_sense_byte = SCSI_SENSE_BUFFERSIZE;
|
|
my_mscp->length_of_scsi_cdbs = SCpnt->cmd_len;
|
|
memcpy(my_mscp->scsi_cdbs, SCpnt->cmnd, my_mscp->length_of_scsi_cdbs);
|
|
my_mscp->adapter_status = 0;
|
|
my_mscp->target_status = 0;
|
|
my_mscp->sense_data = isa_virt_to_bus(&SCpnt->sense_buffer);
|
|
my_mscp->done = done;
|
|
my_mscp->SCint = SCpnt;
|
|
SCpnt->host_scribble = (unsigned char *)my_mscp;
|
|
|
|
/* Find free OGM slot. On 24F, look for OGM status byte == 0.
|
|
On 14F and 34F, wait for local interrupt pending flag to clear.
|
|
|
|
FIXME: now we are using new_eh we should punt here and let the
|
|
midlayer sort it out */
|
|
|
|
retry:
|
|
if (config.slot)
|
|
while (inb(config.ogm_address - 1) != 0 && config.aborted[mscp_index] == 0xff)
|
|
barrier();
|
|
|
|
/* else??? */
|
|
|
|
while ((inb(LCL_DOORBELL_INTR(config.doorbell_address)) & (config.slot ? 2 : 1)) && config.aborted[mscp_index] == 0xff)
|
|
barrier();
|
|
|
|
/* To avoid race conditions, keep the code to write to the adapter
|
|
atomic. This simplifies the abort code. Right now the
|
|
scsi mid layer has the host_lock already held
|
|
*/
|
|
|
|
if (inb(LCL_DOORBELL_INTR(config.doorbell_address)) & (config.slot ? 2 : 1))
|
|
goto retry;
|
|
|
|
status = xchgb(0, &config.aborted[mscp_index]);
|
|
if (status != 0xff) {
|
|
|
|
#if ULTRASTOR_DEBUG & (UD_COMMAND | UD_ABORT)
|
|
printk("USx4F: queuecommand: aborted\n");
|
|
#if ULTRASTOR_MAX_CMDS > 1
|
|
log_ultrastor_abort(&config, mscp_index);
|
|
#endif
|
|
#endif
|
|
status <<= 16;
|
|
|
|
aborted:
|
|
set_bit(mscp_index, &config.mscp_free);
|
|
/* If the driver queues commands, call the done proc here. Otherwise
|
|
return an error. */
|
|
#if ULTRASTOR_MAX_CMDS > 1
|
|
SCpnt->result = status;
|
|
done(SCpnt);
|
|
return 0;
|
|
#else
|
|
return status;
|
|
#endif
|
|
}
|
|
|
|
/* Store pointer in OGM address bytes */
|
|
outl(isa_virt_to_bus(my_mscp), config.ogm_address);
|
|
|
|
/* Issue OGM interrupt */
|
|
if (config.slot) {
|
|
/* Write OGM command register on 24F */
|
|
outb(1, config.ogm_address - 1);
|
|
outb(0x2, LCL_DOORBELL_INTR(config.doorbell_address));
|
|
} else {
|
|
outb(0x1, LCL_DOORBELL_INTR(config.doorbell_address));
|
|
}
|
|
|
|
#if (ULTRASTOR_DEBUG & UD_COMMAND)
|
|
printk("USx4F: queuecommand: returning\n");
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
|
|
static DEF_SCSI_QCMD(ultrastor_queuecommand)
|
|
|
|
/* This code must deal with 2 cases:
|
|
|
|
1. The command has not been written to the OGM. In this case, set
|
|
the abort flag and return.
|
|
|
|
2. The command has been written to the OGM and is stuck somewhere in
|
|
the adapter.
|
|
|
|
2a. On a 24F, ask the adapter to abort the command. It will interrupt
|
|
when it does.
|
|
|
|
2b. Call the command's done procedure.
|
|
|
|
*/
|
|
|
|
static int ultrastor_abort(struct scsi_cmnd *SCpnt)
|
|
{
|
|
#if ULTRASTOR_DEBUG & UD_ABORT
|
|
char out[108];
|
|
unsigned char icm_status = 0, ogm_status = 0;
|
|
unsigned int icm_addr = 0, ogm_addr = 0;
|
|
#endif
|
|
unsigned int mscp_index;
|
|
unsigned char old_aborted;
|
|
unsigned long flags;
|
|
void (*done)(struct scsi_cmnd *);
|
|
struct Scsi_Host *host = SCpnt->device->host;
|
|
|
|
if(config.slot)
|
|
return FAILED; /* Do not attempt an abort for the 24f */
|
|
|
|
/* Simple consistency checking */
|
|
if(!SCpnt->host_scribble)
|
|
return FAILED;
|
|
|
|
mscp_index = ((struct mscp *)SCpnt->host_scribble) - config.mscp;
|
|
if (mscp_index >= ULTRASTOR_MAX_CMDS)
|
|
panic("Ux4F aborting invalid MSCP");
|
|
|
|
#if ULTRASTOR_DEBUG & UD_ABORT
|
|
if (config.slot)
|
|
{
|
|
int port0 = (config.slot << 12) | 0xc80;
|
|
int i;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(host->host_lock, flags);
|
|
strcpy(out, "OGM %d:%x ICM %d:%x ports: ");
|
|
for (i = 0; i < 16; i++)
|
|
{
|
|
unsigned char p = inb(port0 + i);
|
|
out[28 + i * 3] = "0123456789abcdef"[p >> 4];
|
|
out[29 + i * 3] = "0123456789abcdef"[p & 15];
|
|
out[30 + i * 3] = ' ';
|
|
}
|
|
out[28 + i * 3] = '\n';
|
|
out[29 + i * 3] = 0;
|
|
ogm_status = inb(port0 + 22);
|
|
ogm_addr = (unsigned int)isa_bus_to_virt(inl(port0 + 23));
|
|
icm_status = inb(port0 + 27);
|
|
icm_addr = (unsigned int)isa_bus_to_virt(inl(port0 + 28));
|
|
spin_unlock_irqrestore(host->host_lock, flags);
|
|
}
|
|
|
|
/* First check to see if an interrupt is pending. I suspect the SiS
|
|
chipset loses interrupts. (I also suspect is mangles data, but
|
|
one bug at a time... */
|
|
if (config.slot ? inb(config.icm_address - 1) == 2 :
|
|
(inb(SYS_DOORBELL_INTR(config.doorbell_address)) & 1))
|
|
{
|
|
printk("Ux4F: abort while completed command pending\n");
|
|
|
|
spin_lock_irqsave(host->host_lock, flags);
|
|
/* FIXME: Ewww... need to think about passing host around properly */
|
|
ultrastor_interrupt(NULL);
|
|
spin_unlock_irqrestore(host->host_lock, flags);
|
|
return SUCCESS;
|
|
}
|
|
#endif
|
|
|
|
old_aborted = xchgb(DID_ABORT, &config.aborted[mscp_index]);
|
|
|
|
/* aborted == 0xff is the signal that queuecommand has not yet sent
|
|
the command. It will notice the new abort flag and fail. */
|
|
if (old_aborted == 0xff)
|
|
return SUCCESS;
|
|
|
|
/* On 24F, send an abort MSCP request. The adapter will interrupt
|
|
and the interrupt handler will call done. */
|
|
if (config.slot && inb(config.ogm_address - 1) == 0)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(host->host_lock, flags);
|
|
outl(isa_virt_to_bus(&config.mscp[mscp_index]), config.ogm_address);
|
|
udelay(8);
|
|
outb(0x80, config.ogm_address - 1);
|
|
outb(0x2, LCL_DOORBELL_INTR(config.doorbell_address));
|
|
#if ULTRASTOR_DEBUG & UD_ABORT
|
|
log_ultrastor_abort(&config, mscp_index);
|
|
printk(out, ogm_status, ogm_addr, icm_status, icm_addr);
|
|
#endif
|
|
spin_unlock_irqrestore(host->host_lock, flags);
|
|
/* FIXME: add a wait for the abort to complete */
|
|
return SUCCESS;
|
|
}
|
|
|
|
#if ULTRASTOR_DEBUG & UD_ABORT
|
|
log_ultrastor_abort(&config, mscp_index);
|
|
#endif
|
|
|
|
/* Can't request a graceful abort. Either this is not a 24F or
|
|
the OGM is busy. Don't free the command -- the adapter might
|
|
still be using it. Setting SCint = 0 causes the interrupt
|
|
handler to ignore the command. */
|
|
|
|
/* FIXME - devices that implement soft resets will still be running
|
|
the command after a bus reset. We would probably rather leave
|
|
the command in the queue. The upper level code will automatically
|
|
leave the command in the active state instead of requeueing it. ERY */
|
|
|
|
#if ULTRASTOR_DEBUG & UD_ABORT
|
|
if (config.mscp[mscp_index].SCint != SCpnt)
|
|
printk("abort: command mismatch, %p != %p\n",
|
|
config.mscp[mscp_index].SCint, SCpnt);
|
|
#endif
|
|
if (config.mscp[mscp_index].SCint == NULL)
|
|
return FAILED;
|
|
|
|
if (config.mscp[mscp_index].SCint != SCpnt) panic("Bad abort");
|
|
config.mscp[mscp_index].SCint = NULL;
|
|
done = config.mscp[mscp_index].done;
|
|
config.mscp[mscp_index].done = NULL;
|
|
SCpnt->result = DID_ABORT << 16;
|
|
|
|
/* Take the host lock to guard against scsi layer re-entry */
|
|
done(SCpnt);
|
|
|
|
/* Need to set a timeout here in case command never completes. */
|
|
return SUCCESS;
|
|
}
|
|
|
|
static int ultrastor_host_reset(struct scsi_cmnd * SCpnt)
|
|
{
|
|
unsigned long flags;
|
|
int i;
|
|
struct Scsi_Host *host = SCpnt->device->host;
|
|
|
|
#if (ULTRASTOR_DEBUG & UD_RESET)
|
|
printk("US14F: reset: called\n");
|
|
#endif
|
|
|
|
if(config.slot)
|
|
return FAILED;
|
|
|
|
spin_lock_irqsave(host->host_lock, flags);
|
|
/* Reset the adapter and SCSI bus. The SCSI bus reset can be
|
|
inhibited by clearing ultrastor_bus_reset before probe. */
|
|
outb(0xc0, LCL_DOORBELL_INTR(config.doorbell_address));
|
|
if (config.slot)
|
|
{
|
|
outb(0, config.ogm_address - 1);
|
|
outb(0, config.icm_address - 1);
|
|
}
|
|
|
|
#if ULTRASTOR_MAX_CMDS == 1
|
|
if (config.mscp_busy && config.mscp->done && config.mscp->SCint)
|
|
{
|
|
config.mscp->SCint->result = DID_RESET << 16;
|
|
config.mscp->done(config.mscp->SCint);
|
|
}
|
|
config.mscp->SCint = 0;
|
|
#else
|
|
for (i = 0; i < ULTRASTOR_MAX_CMDS; i++)
|
|
{
|
|
if (! (config.mscp_free & (1 << i)) &&
|
|
config.mscp[i].done && config.mscp[i].SCint)
|
|
{
|
|
config.mscp[i].SCint->result = DID_RESET << 16;
|
|
config.mscp[i].done(config.mscp[i].SCint);
|
|
config.mscp[i].done = NULL;
|
|
}
|
|
config.mscp[i].SCint = NULL;
|
|
}
|
|
#endif
|
|
|
|
/* FIXME - if the device implements soft resets, then the command
|
|
will still be running. ERY
|
|
|
|
Even bigger deal with new_eh!
|
|
*/
|
|
|
|
memset((unsigned char *)config.aborted, 0, sizeof config.aborted);
|
|
#if ULTRASTOR_MAX_CMDS == 1
|
|
config.mscp_busy = 0;
|
|
#else
|
|
config.mscp_free = ~0;
|
|
#endif
|
|
|
|
spin_unlock_irqrestore(host->host_lock, flags);
|
|
return SUCCESS;
|
|
|
|
}
|
|
|
|
int ultrastor_biosparam(struct scsi_device *sdev, struct block_device *bdev,
|
|
sector_t capacity, int * dkinfo)
|
|
{
|
|
int size = capacity;
|
|
unsigned int s = config.heads * config.sectors;
|
|
|
|
dkinfo[0] = config.heads;
|
|
dkinfo[1] = config.sectors;
|
|
dkinfo[2] = size / s; /* Ignore partial cylinders */
|
|
#if 0
|
|
if (dkinfo[2] > 1024)
|
|
dkinfo[2] = 1024;
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static void ultrastor_interrupt(void *dev_id)
|
|
{
|
|
unsigned int status;
|
|
#if ULTRASTOR_MAX_CMDS > 1
|
|
unsigned int mscp_index;
|
|
#endif
|
|
struct mscp *mscp;
|
|
void (*done) (struct scsi_cmnd *);
|
|
struct scsi_cmnd *SCtmp;
|
|
|
|
#if ULTRASTOR_MAX_CMDS == 1
|
|
mscp = &config.mscp[0];
|
|
#else
|
|
mscp = (struct mscp *)isa_bus_to_virt(inl(config.icm_address));
|
|
mscp_index = mscp - config.mscp;
|
|
if (mscp_index >= ULTRASTOR_MAX_CMDS) {
|
|
printk("Ux4F interrupt: bad MSCP address %x\n", (unsigned int) mscp);
|
|
/* A command has been lost. Reset and report an error
|
|
for all commands. */
|
|
ultrastor_host_reset(dev_id);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/* Clean ICM slot (set ICMINT bit to 0) */
|
|
if (config.slot) {
|
|
unsigned char icm_status = inb(config.icm_address - 1);
|
|
#if ULTRASTOR_DEBUG & (UD_INTERRUPT|UD_ERROR|UD_ABORT)
|
|
if (icm_status != 1 && icm_status != 2)
|
|
printk("US24F: ICM status %x for MSCP %d (%x)\n", icm_status,
|
|
mscp_index, (unsigned int) mscp);
|
|
#endif
|
|
/* The manual says clear interrupt then write 0 to ICM status.
|
|
This seems backwards, but I'll do it anyway. --jfc */
|
|
outb(2, SYS_DOORBELL_INTR(config.doorbell_address));
|
|
outb(0, config.icm_address - 1);
|
|
if (icm_status == 4) {
|
|
printk("UltraStor abort command failed\n");
|
|
return;
|
|
}
|
|
if (icm_status == 3) {
|
|
void (*done)(struct scsi_cmnd *) = mscp->done;
|
|
if (done) {
|
|
mscp->done = NULL;
|
|
mscp->SCint->result = DID_ABORT << 16;
|
|
done(mscp->SCint);
|
|
}
|
|
return;
|
|
}
|
|
} else {
|
|
outb(1, SYS_DOORBELL_INTR(config.doorbell_address));
|
|
}
|
|
|
|
SCtmp = mscp->SCint;
|
|
mscp->SCint = NULL;
|
|
|
|
if (!SCtmp)
|
|
{
|
|
#if ULTRASTOR_DEBUG & (UD_ABORT|UD_INTERRUPT)
|
|
printk("MSCP %d (%x): no command\n", mscp_index, (unsigned int) mscp);
|
|
#endif
|
|
#if ULTRASTOR_MAX_CMDS == 1
|
|
config.mscp_busy = FALSE;
|
|
#else
|
|
set_bit(mscp_index, &config.mscp_free);
|
|
#endif
|
|
config.aborted[mscp_index] = 0;
|
|
return;
|
|
}
|
|
|
|
/* Save done locally and zero before calling. This is needed as
|
|
once we call done, we may get another command queued before this
|
|
interrupt service routine can return. */
|
|
done = mscp->done;
|
|
mscp->done = NULL;
|
|
|
|
/* Let the higher levels know that we're done */
|
|
switch (mscp->adapter_status)
|
|
{
|
|
case 0:
|
|
status = DID_OK << 16;
|
|
break;
|
|
case 0x01: /* invalid command */
|
|
case 0x02: /* invalid parameters */
|
|
case 0x03: /* invalid data list */
|
|
default:
|
|
status = DID_ERROR << 16;
|
|
break;
|
|
case 0x84: /* SCSI bus abort */
|
|
status = DID_ABORT << 16;
|
|
break;
|
|
case 0x91:
|
|
status = DID_TIME_OUT << 16;
|
|
break;
|
|
}
|
|
|
|
SCtmp->result = status | mscp->target_status;
|
|
|
|
SCtmp->host_scribble = NULL;
|
|
|
|
/* Free up mscp block for next command */
|
|
#if ULTRASTOR_MAX_CMDS == 1
|
|
config.mscp_busy = FALSE;
|
|
#else
|
|
set_bit(mscp_index, &config.mscp_free);
|
|
#endif
|
|
|
|
#if ULTRASTOR_DEBUG & (UD_ABORT|UD_INTERRUPT)
|
|
if (config.aborted[mscp_index])
|
|
printk("Ux4 interrupt: MSCP %d (%x) aborted = %d\n",
|
|
mscp_index, (unsigned int) mscp, config.aborted[mscp_index]);
|
|
#endif
|
|
config.aborted[mscp_index] = 0;
|
|
|
|
if (done)
|
|
done(SCtmp);
|
|
else
|
|
printk("US14F: interrupt: unexpected interrupt\n");
|
|
|
|
if (config.slot ? inb(config.icm_address - 1) :
|
|
(inb(SYS_DOORBELL_INTR(config.doorbell_address)) & 1))
|
|
#if (ULTRASTOR_DEBUG & UD_MULTI_CMD)
|
|
printk("Ux4F: multiple commands completed\n");
|
|
#else
|
|
;
|
|
#endif
|
|
|
|
#if (ULTRASTOR_DEBUG & UD_INTERRUPT)
|
|
printk("USx4F: interrupt: returning\n");
|
|
#endif
|
|
}
|
|
|
|
static irqreturn_t do_ultrastor_interrupt(int irq, void *dev_id)
|
|
{
|
|
unsigned long flags;
|
|
struct Scsi_Host *dev = dev_id;
|
|
|
|
spin_lock_irqsave(dev->host_lock, flags);
|
|
ultrastor_interrupt(dev_id);
|
|
spin_unlock_irqrestore(dev->host_lock, flags);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
static struct scsi_host_template driver_template = {
|
|
.name = "UltraStor 14F/24F/34F",
|
|
.detect = ultrastor_detect,
|
|
.release = ultrastor_release,
|
|
.info = ultrastor_info,
|
|
.queuecommand = ultrastor_queuecommand,
|
|
.eh_abort_handler = ultrastor_abort,
|
|
.eh_host_reset_handler = ultrastor_host_reset,
|
|
.bios_param = ultrastor_biosparam,
|
|
.can_queue = ULTRASTOR_MAX_CMDS,
|
|
.sg_tablesize = ULTRASTOR_14F_MAX_SG,
|
|
.cmd_per_lun = ULTRASTOR_MAX_CMDS_PER_LUN,
|
|
.unchecked_isa_dma = 1,
|
|
.use_clustering = ENABLE_CLUSTERING,
|
|
};
|
|
#include "scsi_module.c"
|