mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-22 18:13:51 +07:00
40aad3c1a9
The device_type property is deprecated for the flattened device tree and the value "ethernet-phy" has never been defined as having a useful meaning. Neither the kernel nor u-boot depend on it. It should never have appeared in PHY bindings. This patch removes all references to "ethernet-phy" as a device_type value from the documentation and the .dts files. This patch was generated mechanically with the following command and then verified by looking at the diff. sed -i '/"ethernet-phy"/d' `git grep -l '"ethernet-phy"'` Signed-off-by: Grant Likely <grant.likely@linaro.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
448 lines
11 KiB
Plaintext
448 lines
11 KiB
Plaintext
/*
|
|
* MPC8569E MDS Device Tree Source
|
|
*
|
|
* Copyright (C) 2009 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/include/ "fsl/mpc8569si-pre.dtsi"
|
|
|
|
/ {
|
|
model = "MPC8569EMDS";
|
|
compatible = "fsl,MPC8569EMDS";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
interrupt-parent = <&mpic>;
|
|
|
|
aliases {
|
|
ethernet2 = &enet2;
|
|
ethernet3 = &enet3;
|
|
ethernet5 = &enet5;
|
|
ethernet7 = &enet7;
|
|
rapidio0 = &rio;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
};
|
|
|
|
lbc: localbus@e0005000 {
|
|
reg = <0x0 0xe0005000 0x0 0x1000>;
|
|
|
|
ranges = <0x0 0x0 0x0 0xfe000000 0x02000000
|
|
0x1 0x0 0x0 0xf8000000 0x00008000
|
|
0x2 0x0 0x0 0xf0000000 0x04000000
|
|
0x3 0x0 0x0 0xfc000000 0x00008000
|
|
0x4 0x0 0x0 0xf8008000 0x00008000
|
|
0x5 0x0 0x0 0xf8010000 0x00008000>;
|
|
|
|
nor@0,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "cfi-flash";
|
|
reg = <0x0 0x0 0x02000000>;
|
|
bank-width = <1>;
|
|
device-width = <1>;
|
|
partition@0 {
|
|
label = "ramdisk";
|
|
reg = <0x00000000 0x01c00000>;
|
|
};
|
|
partition@1c00000 {
|
|
label = "kernel";
|
|
reg = <0x01c00000 0x002e0000>;
|
|
};
|
|
partiton@1ee0000 {
|
|
label = "dtb";
|
|
reg = <0x01ee0000 0x00020000>;
|
|
};
|
|
partition@1f00000 {
|
|
label = "firmware";
|
|
reg = <0x01f00000 0x00080000>;
|
|
read-only;
|
|
};
|
|
partition@1f80000 {
|
|
label = "u-boot";
|
|
reg = <0x01f80000 0x00080000>;
|
|
read-only;
|
|
};
|
|
};
|
|
|
|
bcsr@1,0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8569mds-bcsr";
|
|
reg = <1 0 0x8000>;
|
|
ranges = <0 1 0 0x8000>;
|
|
|
|
bcsr17: gpio-controller@11 {
|
|
#gpio-cells = <2>;
|
|
compatible = "fsl,mpc8569mds-bcsr-gpio";
|
|
reg = <0x11 0x1>;
|
|
gpio-controller;
|
|
};
|
|
};
|
|
|
|
nand@3,0 {
|
|
compatible = "fsl,mpc8569-fcm-nand",
|
|
"fsl,elbc-fcm-nand";
|
|
reg = <3 0 0x8000>;
|
|
};
|
|
|
|
pib@4,0 {
|
|
compatible = "fsl,mpc8569mds-pib";
|
|
reg = <4 0 0x8000>;
|
|
};
|
|
|
|
pib@5,0 {
|
|
compatible = "fsl,mpc8569mds-pib";
|
|
reg = <5 0 0x8000>;
|
|
};
|
|
};
|
|
|
|
soc: soc@e0000000 {
|
|
ranges = <0x0 0x0 0xe0000000 0x100000>;
|
|
|
|
i2c-sleep-nexus {
|
|
i2c@3000 {
|
|
rtc@68 {
|
|
compatible = "dallas,ds1374";
|
|
reg = <0x68>;
|
|
interrupts = <3 1 0 0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
sdhc@2e000 {
|
|
status = "disabled";
|
|
sdhci,1-bit-only;
|
|
bus-width = <1>;
|
|
};
|
|
|
|
par_io@e0100 {
|
|
num-ports = <7>;
|
|
|
|
qe_pio_e: gpio-controller@80 {
|
|
#gpio-cells = <2>;
|
|
compatible = "fsl,mpc8569-qe-pario-bank",
|
|
"fsl,mpc8323-qe-pario-bank";
|
|
reg = <0x80 0x18>;
|
|
gpio-controller;
|
|
};
|
|
|
|
qe_pio_f: gpio-controller@a0 {
|
|
#gpio-cells = <2>;
|
|
compatible = "fsl,mpc8569-qe-pario-bank",
|
|
"fsl,mpc8323-qe-pario-bank";
|
|
reg = <0xa0 0x18>;
|
|
gpio-controller;
|
|
};
|
|
|
|
pio1: ucc_pin@01 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
|
|
0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
|
|
0x2 0x0b 0x2 0x0 0x1 0x0 /* CLK12*/
|
|
0x0 0x0 0x1 0x0 0x3 0x0 /* ENET1_TXD0_SER1_TXD0 */
|
|
0x0 0x1 0x1 0x0 0x3 0x0 /* ENET1_TXD1_SER1_TXD1 */
|
|
0x0 0x2 0x1 0x0 0x1 0x0 /* ENET1_TXD2_SER1_TXD2 */
|
|
0x0 0x3 0x1 0x0 0x2 0x0 /* ENET1_TXD3_SER1_TXD3 */
|
|
0x0 0x6 0x2 0x0 0x3 0x0 /* ENET1_RXD0_SER1_RXD0 */
|
|
0x0 0x7 0x2 0x0 0x1 0x0 /* ENET1_RXD1_SER1_RXD1 */
|
|
0x0 0x8 0x2 0x0 0x2 0x0 /* ENET1_RXD2_SER1_RXD2 */
|
|
0x0 0x9 0x2 0x0 0x2 0x0 /* ENET1_RXD3_SER1_RXD3 */
|
|
0x0 0x4 0x1 0x0 0x2 0x0 /* ENET1_TX_EN_SER1_RTS_B */
|
|
0x0 0xc 0x2 0x0 0x3 0x0 /* ENET1_RX_DV_SER1_CTS_B */
|
|
0x2 0x8 0x2 0x0 0x1 0x0 /* ENET1_GRXCLK */
|
|
0x2 0x14 0x1 0x0 0x2 0x0>; /* ENET1_GTXCLK */
|
|
};
|
|
|
|
pio2: ucc_pin@02 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
|
|
0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
|
|
0x2 0x10 0x2 0x0 0x3 0x0 /* CLK17 */
|
|
0x0 0xe 0x1 0x0 0x2 0x0 /* ENET2_TXD0_SER2_TXD0 */
|
|
0x0 0xf 0x1 0x0 0x2 0x0 /* ENET2_TXD1_SER2_TXD1 */
|
|
0x0 0x10 0x1 0x0 0x1 0x0 /* ENET2_TXD2_SER2_TXD2 */
|
|
0x0 0x11 0x1 0x0 0x1 0x0 /* ENET2_TXD3_SER2_TXD3 */
|
|
0x0 0x14 0x2 0x0 0x2 0x0 /* ENET2_RXD0_SER2_RXD0 */
|
|
0x0 0x15 0x2 0x0 0x1 0x0 /* ENET2_RXD1_SER2_RXD1 */
|
|
0x0 0x16 0x2 0x0 0x1 0x0 /* ENET2_RXD2_SER2_RXD2 */
|
|
0x0 0x17 0x2 0x0 0x1 0x0 /* ENET2_RXD3_SER2_RXD3 */
|
|
0x0 0x12 0x1 0x0 0x2 0x0 /* ENET2_TX_EN_SER2_RTS_B */
|
|
0x0 0x1a 0x2 0x0 0x3 0x0 /* ENET2_RX_DV_SER2_CTS_B */
|
|
0x2 0x3 0x2 0x0 0x1 0x0 /* ENET2_GRXCLK */
|
|
0x2 0x2 0x1 0x0 0x2 0x0>; /* ENET2_GTXCLK */
|
|
};
|
|
|
|
pio3: ucc_pin@03 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
|
|
0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
|
|
0x2 0x0b 0x2 0x0 0x1 0x0 /* CLK12*/
|
|
0x0 0x1d 0x1 0x0 0x2 0x0 /* ENET3_TXD0_SER3_TXD0 */
|
|
0x0 0x1e 0x1 0x0 0x3 0x0 /* ENET3_TXD1_SER3_TXD1 */
|
|
0x0 0x1f 0x1 0x0 0x2 0x0 /* ENET3_TXD2_SER3_TXD2 */
|
|
0x1 0x0 0x1 0x0 0x3 0x0 /* ENET3_TXD3_SER3_TXD3 */
|
|
0x1 0x3 0x2 0x0 0x3 0x0 /* ENET3_RXD0_SER3_RXD0 */
|
|
0x1 0x4 0x2 0x0 0x1 0x0 /* ENET3_RXD1_SER3_RXD1 */
|
|
0x1 0x5 0x2 0x0 0x2 0x0 /* ENET3_RXD2_SER3_RXD2 */
|
|
0x1 0x6 0x2 0x0 0x3 0x0 /* ENET3_RXD3_SER3_RXD3 */
|
|
0x1 0x1 0x1 0x0 0x1 0x0 /* ENET3_TX_EN_SER3_RTS_B */
|
|
0x1 0x9 0x2 0x0 0x3 0x0 /* ENET3_RX_DV_SER3_CTS_B */
|
|
0x2 0x9 0x2 0x0 0x2 0x0 /* ENET3_GRXCLK */
|
|
0x2 0x19 0x1 0x0 0x2 0x0>; /* ENET3_GTXCLK */
|
|
};
|
|
|
|
pio4: ucc_pin@04 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0x2 0x1f 0x1 0x0 0x1 0x0 /* QE_MUX_MDC */
|
|
0x2 0x1e 0x3 0x0 0x2 0x0 /* QE_MUX_MDIO */
|
|
0x2 0x10 0x2 0x0 0x3 0x0 /* CLK17 */
|
|
0x1 0xc 0x1 0x0 0x2 0x0 /* ENET4_TXD0_SER4_TXD0 */
|
|
0x1 0xd 0x1 0x0 0x2 0x0 /* ENET4_TXD1_SER4_TXD1 */
|
|
0x1 0xe 0x1 0x0 0x1 0x0 /* ENET4_TXD2_SER4_TXD2 */
|
|
0x1 0xf 0x1 0x0 0x2 0x0 /* ENET4_TXD3_SER4_TXD3 */
|
|
0x1 0x12 0x2 0x0 0x2 0x0 /* ENET4_RXD0_SER4_RXD0 */
|
|
0x1 0x13 0x2 0x0 0x1 0x0 /* ENET4_RXD1_SER4_RXD1 */
|
|
0x1 0x14 0x2 0x0 0x1 0x0 /* ENET4_RXD2_SER4_RXD2 */
|
|
0x1 0x15 0x2 0x0 0x2 0x0 /* ENET4_RXD3_SER4_RXD3 */
|
|
0x1 0x10 0x1 0x0 0x2 0x0 /* ENET4_TX_EN_SER4_RTS_B */
|
|
0x1 0x18 0x2 0x0 0x3 0x0 /* ENET4_RX_DV_SER4_CTS_B */
|
|
0x2 0x11 0x2 0x0 0x2 0x0 /* ENET4_GRXCLK */
|
|
0x2 0x18 0x1 0x0 0x2 0x0>; /* ENET4_GTXCLK */
|
|
};
|
|
};
|
|
};
|
|
|
|
qe: qe@e0080000 {
|
|
ranges = <0x0 0x0 0xe0080000 0x40000>;
|
|
reg = <0x0 0xe0080000 0x0 0x480>;
|
|
|
|
spi@4c0 {
|
|
gpios = <&qe_pio_e 30 0>;
|
|
mode = "cpu-qe";
|
|
|
|
serial-flash@0 {
|
|
compatible = "stm,m25p40";
|
|
reg = <0>;
|
|
spi-max-frequency = <25000000>;
|
|
};
|
|
};
|
|
|
|
spi@500 {
|
|
mode = "cpu";
|
|
};
|
|
|
|
usb@6c0 {
|
|
fsl,fullspeed-clock = "clk5";
|
|
fsl,lowspeed-clock = "brg10";
|
|
gpios = <&qe_pio_f 3 0 /* USBOE */
|
|
&qe_pio_f 4 0 /* USBTP */
|
|
&qe_pio_f 5 0 /* USBTN */
|
|
&qe_pio_f 6 0 /* USBRP */
|
|
&qe_pio_f 8 0 /* USBRN */
|
|
&bcsr17 1 0 /* SPEED */
|
|
&bcsr17 2 0>; /* POWER */
|
|
};
|
|
|
|
enet0: ucc@2000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk12";
|
|
pio-handle = <&pio1>;
|
|
tbi-handle = <&tbi1>;
|
|
phy-handle = <&qe_phy0>;
|
|
phy-connection-type = "rgmii-id";
|
|
};
|
|
|
|
mdio@2120 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x2120 0x18>;
|
|
compatible = "fsl,ucc-mdio";
|
|
|
|
qe_phy0: ethernet-phy@07 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <1 1 0 0>;
|
|
reg = <0x7>;
|
|
};
|
|
qe_phy1: ethernet-phy@01 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <2 1 0 0>;
|
|
reg = <0x1>;
|
|
};
|
|
qe_phy2: ethernet-phy@02 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <3 1 0 0>;
|
|
reg = <0x2>;
|
|
};
|
|
qe_phy3: ethernet-phy@03 {
|
|
interrupt-parent = <&mpic>;
|
|
interrupts = <4 1 0 0>;
|
|
reg = <0x3>;
|
|
};
|
|
qe_phy5: ethernet-phy@04 {
|
|
reg = <0x04>;
|
|
};
|
|
qe_phy7: ethernet-phy@06 {
|
|
reg = <0x6>;
|
|
};
|
|
tbi1: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
mdio@3520 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x3520 0x18>;
|
|
compatible = "fsl,ucc-mdio";
|
|
|
|
tbi6: tbi-phy@15 {
|
|
reg = <0x15>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
mdio@3720 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x3720 0x38>;
|
|
compatible = "fsl,ucc-mdio";
|
|
tbi8: tbi-phy@17 {
|
|
reg = <0x17>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
|
|
enet2: ucc@2200 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk12";
|
|
pio-handle = <&pio3>;
|
|
tbi-handle = <&tbi3>;
|
|
phy-handle = <&qe_phy2>;
|
|
phy-connection-type = "rgmii-id";
|
|
};
|
|
|
|
mdio@2320 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x2320 0x18>;
|
|
compatible = "fsl,ucc-mdio";
|
|
tbi3: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
|
|
enet1: ucc@3000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk17";
|
|
pio-handle = <&pio2>;
|
|
tbi-handle = <&tbi2>;
|
|
phy-handle = <&qe_phy1>;
|
|
phy-connection-type = "rgmii-id";
|
|
};
|
|
|
|
mdio@3120 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x3120 0x18>;
|
|
compatible = "fsl,ucc-mdio";
|
|
tbi2: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
|
|
enet3: ucc@3200 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk17";
|
|
pio-handle = <&pio4>;
|
|
tbi-handle = <&tbi4>;
|
|
phy-handle = <&qe_phy3>;
|
|
phy-connection-type = "rgmii-id";
|
|
};
|
|
|
|
mdio@3320 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x3320 0x18>;
|
|
compatible = "fsl,ucc-mdio";
|
|
tbi4: tbi-phy@11 {
|
|
reg = <0x11>;
|
|
device_type = "tbi-phy";
|
|
};
|
|
};
|
|
|
|
enet5: ucc@3400 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "none";
|
|
tbi-handle = <&tbi6>;
|
|
phy-handle = <&qe_phy5>;
|
|
phy-connection-type = "sgmii";
|
|
};
|
|
|
|
enet7: ucc@3600 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "none";
|
|
tbi-handle = <&tbi8>;
|
|
phy-handle = <&qe_phy7>;
|
|
phy-connection-type = "sgmii";
|
|
};
|
|
};
|
|
|
|
/* PCI Express */
|
|
pci1: pcie@e000a000 {
|
|
reg = <0x0 0xe000a000 0x0 0x1000>;
|
|
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x10000000
|
|
0x1000000 0x0 0x00000000 0 0xe2800000 0x0 0x00800000>;
|
|
pcie@0 {
|
|
ranges = <0x2000000 0x0 0xa0000000
|
|
0x2000000 0x0 0xa0000000
|
|
0x0 0x10000000
|
|
|
|
0x1000000 0x0 0x0
|
|
0x1000000 0x0 0x0
|
|
0x0 0x800000>;
|
|
};
|
|
};
|
|
|
|
rio: rapidio@e00c00000 {
|
|
reg = <0x0 0xe00c0000 0x0 0x20000>;
|
|
port1 {
|
|
ranges = <0x0 0x0 0x0 0xc0000000 0x0 0x20000000>;
|
|
};
|
|
port2 {
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
/include/ "fsl/mpc8569si-post.dtsi"
|