linux_dsm_epyc7002/drivers/gpu/drm/tidss/tidss_plane.h
Jyri Sarha 32a1795f57 drm/tidss: New driver for TI Keystone platform Display SubSystem
This patch adds a new DRM driver for Texas Instruments DSS IPs used on
Texas Instruments Keystone K2G, AM65x, and J721e SoCs. The new DSS IP is
a major change to the older DSS IP versions, which are supported by
the omapdrm driver. While on higher level the Keystone DSS resembles
the older DSS versions, the registers are completely different and the
internal pipelines differ a lot.

DSS IP found on K2G is an "ultra-light" version, and has only a single
plane and a single output. The K3 DSS IPs are found on AM65x and J721E
SoCs. AM65x DSS has two video ports, one full video plane, and another
"lite" plane without scaling support. J721E has 4 video ports, 2 video
planes and 2 lite planes. AM65x DSS has also an integrated OLDI (LVDS)
output.

Version history:

v2: - rebased on top of drm-next-2019-11-27
    - sort all include lines in all files
    - remove all include <drm/drmP.h>
    - remove select "select VIDEOMODE_HELPERS"
    - call dispc_vp_setup() later in tidss_crtc_atomic_flush() (there is no
      to call it in new modeset case as it is also called in vp_enable())
    - change probe sequence and drm_device allocation (follow example in
      drm_drv.c)
    - use __maybe_unused instead of #ifdef for pm functions
    - remove "struct drm_fbdev_cma *fbdev;" from driver data
    - check panel connector type before connecting it

v3: no change

v4: no change

v5: - remove fifo underflow irq handling, it is not an error and
      it should be used for debug purposes only
    - memory tuning, prefetch plane fifo up to high-threshold value to
      minimize possibility of underflows.

v6: - Check CTM and gamma support from dispc_features when creating crtc
    - Implement CTM support for k2g and fix k3 CTM implementation
    - Remove gamma property persistence and always write color properties
      in a new modeset

v7: - Fix checkpatch.pl --strict issues
    - Rebase on top of drm-misc-next-2020-01-10

v8: - Remove idle debug prints from dispc_init()
    - Add Reviewed-by: Benoit Parrot <bparrot@ti.com>

v9: - Rename dispc_write_irqenable() to dispc_set_irqenable() to avoid
      conflict exported omapfb function with same name
    - Add Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>

Co-developed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Reviewed-by: Benoit Parrot <bparrot@ti.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/925fbfad58ff828e8e07fdff7073a0ee65750c3d.1580129724.git.jsarha@ti.com
2020-01-27 19:27:30 +02:00

26 lines
581 B
C

/* SPDX-License-Identifier: GPL-2.0 */
/*
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
* Author: Tomi Valkeinen <tomi.valkeinen@ti.com>
*/
#ifndef __TIDSS_PLANE_H__
#define __TIDSS_PLANE_H__
#define to_tidss_plane(p) container_of((p), struct tidss_plane, plane)
struct tidss_device;
struct tidss_plane {
struct drm_plane plane;
u32 hw_plane_id;
};
struct tidss_plane *tidss_plane_create(struct tidss_device *tidss,
u32 hw_plane_id, u32 plane_type,
u32 crtc_mask, const u32 *formats,
u32 num_formats);
#endif