mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 20:45:31 +07:00
4fbc485324
The actual device name of the SPI controller being registered on EP93xx is
"spi0" (as seen by gpiod_find_lookup_table()). This patch fixes all
relevant lookup tables and the following failure (seen on EDB9302):
ep93xx-spi ep93xx-spi.0: failed to register SPI master
ep93xx-spi: probe of ep93xx-spi.0 failed with error -22
Fixes: 1dfbf334f1 ("spi: ep93xx: Convert to use CS GPIO descriptors")
Cc: stable@vger.kernel.org
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20190831180402.10008-1-alexander.sverdlin@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
424 lines
12 KiB
C
424 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* arch/arm/mach-ep93xx/ts72xx.c
|
|
* Technologic Systems TS72xx SBC support.
|
|
*
|
|
* Copyright (C) 2006 Lennert Buytenhek <buytenh@wantstofly.org>
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/mtd/platnand.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/flash.h>
|
|
#include <linux/spi/mmc_spi.h>
|
|
#include <linux/mmc/host.h>
|
|
#include <linux/platform_data/spi-ep93xx.h>
|
|
#include <linux/gpio/machine.h>
|
|
|
|
#include "gpio-ep93xx.h"
|
|
#include "hardware.h"
|
|
#include <mach/irqs.h>
|
|
|
|
#include <asm/mach-types.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/mach/arch.h>
|
|
|
|
#include "soc.h"
|
|
#include "ts72xx.h"
|
|
|
|
/*************************************************************************
|
|
* IO map
|
|
*************************************************************************/
|
|
static struct map_desc ts72xx_io_desc[] __initdata = {
|
|
{
|
|
.virtual = (unsigned long)TS72XX_MODEL_VIRT_BASE,
|
|
.pfn = __phys_to_pfn(TS72XX_MODEL_PHYS_BASE),
|
|
.length = TS72XX_MODEL_SIZE,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (unsigned long)TS72XX_OPTIONS_VIRT_BASE,
|
|
.pfn = __phys_to_pfn(TS72XX_OPTIONS_PHYS_BASE),
|
|
.length = TS72XX_OPTIONS_SIZE,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (unsigned long)TS72XX_OPTIONS2_VIRT_BASE,
|
|
.pfn = __phys_to_pfn(TS72XX_OPTIONS2_PHYS_BASE),
|
|
.length = TS72XX_OPTIONS2_SIZE,
|
|
.type = MT_DEVICE,
|
|
}, {
|
|
.virtual = (unsigned long)TS72XX_CPLDVER_VIRT_BASE,
|
|
.pfn = __phys_to_pfn(TS72XX_CPLDVER_PHYS_BASE),
|
|
.length = TS72XX_CPLDVER_SIZE,
|
|
.type = MT_DEVICE,
|
|
}
|
|
};
|
|
|
|
static void __init ts72xx_map_io(void)
|
|
{
|
|
ep93xx_map_io();
|
|
iotable_init(ts72xx_io_desc, ARRAY_SIZE(ts72xx_io_desc));
|
|
}
|
|
|
|
|
|
/*************************************************************************
|
|
* NAND flash
|
|
*************************************************************************/
|
|
#define TS72XX_NAND_CONTROL_ADDR_LINE 22 /* 0xN0400000 */
|
|
#define TS72XX_NAND_BUSY_ADDR_LINE 23 /* 0xN0800000 */
|
|
|
|
static void ts72xx_nand_hwcontrol(struct nand_chip *chip,
|
|
int cmd, unsigned int ctrl)
|
|
{
|
|
if (ctrl & NAND_CTRL_CHANGE) {
|
|
void __iomem *addr = chip->legacy.IO_ADDR_R;
|
|
unsigned char bits;
|
|
|
|
addr += (1 << TS72XX_NAND_CONTROL_ADDR_LINE);
|
|
|
|
bits = __raw_readb(addr) & ~0x07;
|
|
bits |= (ctrl & NAND_NCE) << 2; /* bit 0 -> bit 2 */
|
|
bits |= (ctrl & NAND_CLE); /* bit 1 -> bit 1 */
|
|
bits |= (ctrl & NAND_ALE) >> 2; /* bit 2 -> bit 0 */
|
|
|
|
__raw_writeb(bits, addr);
|
|
}
|
|
|
|
if (cmd != NAND_CMD_NONE)
|
|
__raw_writeb(cmd, chip->legacy.IO_ADDR_W);
|
|
}
|
|
|
|
static int ts72xx_nand_device_ready(struct nand_chip *chip)
|
|
{
|
|
void __iomem *addr = chip->legacy.IO_ADDR_R;
|
|
|
|
addr += (1 << TS72XX_NAND_BUSY_ADDR_LINE);
|
|
|
|
return !!(__raw_readb(addr) & 0x20);
|
|
}
|
|
|
|
#define TS72XX_BOOTROM_PART_SIZE (SZ_16K)
|
|
#define TS72XX_REDBOOT_PART_SIZE (SZ_2M + SZ_1M)
|
|
|
|
static struct mtd_partition ts72xx_nand_parts[] = {
|
|
{
|
|
.name = "TS-BOOTROM",
|
|
.offset = 0,
|
|
.size = TS72XX_BOOTROM_PART_SIZE,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
}, {
|
|
.name = "Linux",
|
|
.offset = MTDPART_OFS_RETAIN,
|
|
.size = TS72XX_REDBOOT_PART_SIZE,
|
|
/* leave so much for last partition */
|
|
}, {
|
|
.name = "RedBoot",
|
|
.offset = MTDPART_OFS_APPEND,
|
|
.size = MTDPART_SIZ_FULL,
|
|
.mask_flags = MTD_WRITEABLE, /* force read-only */
|
|
},
|
|
};
|
|
|
|
static struct platform_nand_data ts72xx_nand_data = {
|
|
.chip = {
|
|
.nr_chips = 1,
|
|
.chip_offset = 0,
|
|
.chip_delay = 15,
|
|
},
|
|
.ctrl = {
|
|
.cmd_ctrl = ts72xx_nand_hwcontrol,
|
|
.dev_ready = ts72xx_nand_device_ready,
|
|
},
|
|
};
|
|
|
|
static struct resource ts72xx_nand_resource[] = {
|
|
{
|
|
.start = 0, /* filled in later */
|
|
.end = 0, /* filled in later */
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device ts72xx_nand_flash = {
|
|
.name = "gen_nand",
|
|
.id = -1,
|
|
.dev.platform_data = &ts72xx_nand_data,
|
|
.resource = ts72xx_nand_resource,
|
|
.num_resources = ARRAY_SIZE(ts72xx_nand_resource),
|
|
};
|
|
|
|
void __init ts72xx_register_flash(struct mtd_partition *parts, int n,
|
|
resource_size_t start)
|
|
{
|
|
/*
|
|
* TS7200 has NOR flash all other TS72xx board have NAND flash.
|
|
*/
|
|
if (board_is_ts7200()) {
|
|
ep93xx_register_flash(2, EP93XX_CS6_PHYS_BASE, SZ_16M);
|
|
} else {
|
|
ts72xx_nand_resource[0].start = start;
|
|
ts72xx_nand_resource[0].end = start + SZ_16M - 1;
|
|
|
|
ts72xx_nand_data.chip.partitions = parts;
|
|
ts72xx_nand_data.chip.nr_partitions = n;
|
|
|
|
platform_device_register(&ts72xx_nand_flash);
|
|
}
|
|
}
|
|
|
|
/*************************************************************************
|
|
* RTC M48T86
|
|
*************************************************************************/
|
|
#define TS72XX_RTC_INDEX_PHYS_BASE (EP93XX_CS1_PHYS_BASE + 0x00800000)
|
|
#define TS72XX_RTC_DATA_PHYS_BASE (EP93XX_CS1_PHYS_BASE + 0x01700000)
|
|
|
|
static struct resource ts72xx_rtc_resources[] = {
|
|
DEFINE_RES_MEM(TS72XX_RTC_INDEX_PHYS_BASE, 0x01),
|
|
DEFINE_RES_MEM(TS72XX_RTC_DATA_PHYS_BASE, 0x01),
|
|
};
|
|
|
|
static struct platform_device ts72xx_rtc_device = {
|
|
.name = "rtc-m48t86",
|
|
.id = -1,
|
|
.resource = ts72xx_rtc_resources,
|
|
.num_resources = ARRAY_SIZE(ts72xx_rtc_resources),
|
|
};
|
|
|
|
/*************************************************************************
|
|
* Watchdog (in CPLD)
|
|
*************************************************************************/
|
|
#define TS72XX_WDT_CONTROL_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03800000)
|
|
#define TS72XX_WDT_FEED_PHYS_BASE (EP93XX_CS2_PHYS_BASE + 0x03c00000)
|
|
|
|
static struct resource ts72xx_wdt_resources[] = {
|
|
DEFINE_RES_MEM(TS72XX_WDT_CONTROL_PHYS_BASE, 0x01),
|
|
DEFINE_RES_MEM(TS72XX_WDT_FEED_PHYS_BASE, 0x01),
|
|
};
|
|
|
|
static struct platform_device ts72xx_wdt_device = {
|
|
.name = "ts72xx-wdt",
|
|
.id = -1,
|
|
.resource = ts72xx_wdt_resources,
|
|
.num_resources = ARRAY_SIZE(ts72xx_wdt_resources),
|
|
};
|
|
|
|
/*************************************************************************
|
|
* ETH
|
|
*************************************************************************/
|
|
static struct ep93xx_eth_data __initdata ts72xx_eth_data = {
|
|
.phy_id = 1,
|
|
};
|
|
|
|
/*************************************************************************
|
|
* SPI SD/MMC host
|
|
*************************************************************************/
|
|
#define BK3_EN_SDCARD_PHYS_BASE 0x12400000
|
|
#define BK3_EN_SDCARD_PWR 0x0
|
|
#define BK3_DIS_SDCARD_PWR 0x0C
|
|
static void bk3_mmc_spi_setpower(struct device *dev, unsigned int vdd)
|
|
{
|
|
void __iomem *pwr_sd = ioremap(BK3_EN_SDCARD_PHYS_BASE, SZ_4K);
|
|
|
|
if (!pwr_sd) {
|
|
pr_err("Failed to enable SD card power!");
|
|
return;
|
|
}
|
|
|
|
pr_debug("%s: SD card pwr %s VDD:0x%x\n", __func__,
|
|
!!vdd ? "ON" : "OFF", vdd);
|
|
|
|
if (!!vdd)
|
|
__raw_writeb(BK3_EN_SDCARD_PWR, pwr_sd);
|
|
else
|
|
__raw_writeb(BK3_DIS_SDCARD_PWR, pwr_sd);
|
|
|
|
iounmap(pwr_sd);
|
|
}
|
|
|
|
static struct mmc_spi_platform_data bk3_spi_mmc_data = {
|
|
.detect_delay = 500,
|
|
.powerup_msecs = 100,
|
|
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
|
|
.caps = MMC_CAP_NONREMOVABLE,
|
|
.setpower = bk3_mmc_spi_setpower,
|
|
};
|
|
|
|
/*************************************************************************
|
|
* SPI Bus - SD card access
|
|
*************************************************************************/
|
|
static struct spi_board_info bk3_spi_board_info[] __initdata = {
|
|
{
|
|
.modalias = "mmc_spi",
|
|
.platform_data = &bk3_spi_mmc_data,
|
|
.max_speed_hz = 7.4E6,
|
|
.bus_num = 0,
|
|
.chip_select = 0,
|
|
.mode = SPI_MODE_0,
|
|
},
|
|
};
|
|
|
|
/*
|
|
* This is a stub -> the FGPIO[3] pin is not connected on the schematic
|
|
* The all work is performed automatically by !SPI_FRAME (SFRM1) and
|
|
* goes through CPLD
|
|
*/
|
|
static struct gpiod_lookup_table bk3_spi_cs_gpio_table = {
|
|
.dev_id = "spi0",
|
|
.table = {
|
|
GPIO_LOOKUP("F", 3, "cs", GPIO_ACTIVE_LOW),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
static struct ep93xx_spi_info bk3_spi_master __initdata = {
|
|
.use_dma = 1,
|
|
};
|
|
|
|
/*************************************************************************
|
|
* TS72XX support code
|
|
*************************************************************************/
|
|
#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX)
|
|
|
|
/* Relative to EP93XX_CS1_PHYS_BASE */
|
|
#define TS73XX_FPGA_LOADER_BASE 0x03c00000
|
|
|
|
static struct resource ts73xx_fpga_resources[] = {
|
|
{
|
|
.start = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE,
|
|
.end = EP93XX_CS1_PHYS_BASE + TS73XX_FPGA_LOADER_BASE + 1,
|
|
.flags = IORESOURCE_MEM,
|
|
},
|
|
};
|
|
|
|
static struct platform_device ts73xx_fpga_device = {
|
|
.name = "ts73xx-fpga-mgr",
|
|
.id = -1,
|
|
.resource = ts73xx_fpga_resources,
|
|
.num_resources = ARRAY_SIZE(ts73xx_fpga_resources),
|
|
};
|
|
|
|
#endif
|
|
|
|
/*************************************************************************
|
|
* SPI Bus
|
|
*************************************************************************/
|
|
static struct spi_board_info ts72xx_spi_devices[] __initdata = {
|
|
{
|
|
.modalias = "tmp122",
|
|
.max_speed_hz = 2 * 1000 * 1000,
|
|
.bus_num = 0,
|
|
.chip_select = 0,
|
|
},
|
|
};
|
|
|
|
static struct gpiod_lookup_table ts72xx_spi_cs_gpio_table = {
|
|
.dev_id = "spi0",
|
|
.table = {
|
|
/* DIO_17 */
|
|
GPIO_LOOKUP("F", 2, "cs", GPIO_ACTIVE_LOW),
|
|
{ },
|
|
},
|
|
};
|
|
|
|
static struct ep93xx_spi_info ts72xx_spi_info __initdata = {
|
|
/* Intentionally left blank */
|
|
};
|
|
|
|
static void __init ts72xx_init_machine(void)
|
|
{
|
|
ep93xx_init_devices();
|
|
ts72xx_register_flash(ts72xx_nand_parts, ARRAY_SIZE(ts72xx_nand_parts),
|
|
is_ts9420_installed() ?
|
|
EP93XX_CS7_PHYS_BASE : EP93XX_CS6_PHYS_BASE);
|
|
platform_device_register(&ts72xx_rtc_device);
|
|
platform_device_register(&ts72xx_wdt_device);
|
|
|
|
ep93xx_register_eth(&ts72xx_eth_data, 1);
|
|
#if IS_ENABLED(CONFIG_FPGA_MGR_TS73XX)
|
|
if (board_is_ts7300())
|
|
platform_device_register(&ts73xx_fpga_device);
|
|
#endif
|
|
gpiod_add_lookup_table(&ts72xx_spi_cs_gpio_table);
|
|
ep93xx_register_spi(&ts72xx_spi_info, ts72xx_spi_devices,
|
|
ARRAY_SIZE(ts72xx_spi_devices));
|
|
}
|
|
|
|
MACHINE_START(TS72XX, "Technologic Systems TS-72xx SBC")
|
|
/* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
|
|
.atag_offset = 0x100,
|
|
.map_io = ts72xx_map_io,
|
|
.init_irq = ep93xx_init_irq,
|
|
.init_time = ep93xx_timer_init,
|
|
.init_machine = ts72xx_init_machine,
|
|
.init_late = ep93xx_init_late,
|
|
.restart = ep93xx_restart,
|
|
MACHINE_END
|
|
|
|
/*************************************************************************
|
|
* EP93xx I2S audio peripheral handling
|
|
*************************************************************************/
|
|
static struct resource ep93xx_i2s_resource[] = {
|
|
DEFINE_RES_MEM(EP93XX_I2S_PHYS_BASE, 0x100),
|
|
DEFINE_RES_IRQ_NAMED(IRQ_EP93XX_SAI, "spilink i2s slave"),
|
|
};
|
|
|
|
static struct platform_device ep93xx_i2s_device = {
|
|
.name = "ep93xx-spilink-i2s",
|
|
.id = -1,
|
|
.num_resources = ARRAY_SIZE(ep93xx_i2s_resource),
|
|
.resource = ep93xx_i2s_resource,
|
|
};
|
|
|
|
/*************************************************************************
|
|
* BK3 support code
|
|
*************************************************************************/
|
|
static struct mtd_partition bk3_nand_parts[] = {
|
|
{
|
|
.name = "System",
|
|
.offset = 0x00000000,
|
|
.size = 0x01e00000,
|
|
}, {
|
|
.name = "Data",
|
|
.offset = 0x01e00000,
|
|
.size = 0x05f20000
|
|
}, {
|
|
.name = "RedBoot",
|
|
.offset = 0x07d20000,
|
|
.size = 0x002e0000,
|
|
.mask_flags = MTD_WRITEABLE, /* force RO */
|
|
},
|
|
};
|
|
|
|
static void __init bk3_init_machine(void)
|
|
{
|
|
ep93xx_init_devices();
|
|
|
|
ts72xx_register_flash(bk3_nand_parts, ARRAY_SIZE(bk3_nand_parts),
|
|
EP93XX_CS6_PHYS_BASE);
|
|
|
|
ep93xx_register_eth(&ts72xx_eth_data, 1);
|
|
|
|
gpiod_add_lookup_table(&bk3_spi_cs_gpio_table);
|
|
ep93xx_register_spi(&bk3_spi_master, bk3_spi_board_info,
|
|
ARRAY_SIZE(bk3_spi_board_info));
|
|
|
|
/* Configure ep93xx's I2S to use AC97 pins */
|
|
ep93xx_devcfg_set_bits(EP93XX_SYSCON_DEVCFG_I2SONAC97);
|
|
platform_device_register(&ep93xx_i2s_device);
|
|
}
|
|
|
|
MACHINE_START(BK3, "Liebherr controller BK3.1")
|
|
/* Maintainer: Lukasz Majewski <lukma@denx.de> */
|
|
.atag_offset = 0x100,
|
|
.map_io = ts72xx_map_io,
|
|
.init_irq = ep93xx_init_irq,
|
|
.init_time = ep93xx_timer_init,
|
|
.init_machine = bk3_init_machine,
|
|
.init_late = ep93xx_init_late,
|
|
.restart = ep93xx_restart,
|
|
MACHINE_END
|