mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 11:18:45 +07:00
aaeb5fb599
We have snd_soc_dai/dai_stream/component_active() macro This patch uses it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/87o8qq58ia.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
914 lines
22 KiB
C
914 lines
22 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* pxa-ssp.c -- ALSA Soc Audio Layer
|
|
*
|
|
* Copyright 2005,2008 Wolfson Microelectronics PLC.
|
|
* Author: Liam Girdwood
|
|
* Mark Brown <broonie@opensource.wolfsonmicro.com>
|
|
*
|
|
* TODO:
|
|
* o Test network mode for > 16bit sample size
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/module.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/pxa2xx_ssp.h>
|
|
#include <linux/of.h>
|
|
#include <linux/dmaengine.h>
|
|
|
|
#include <asm/irq.h>
|
|
|
|
#include <sound/core.h>
|
|
#include <sound/pcm.h>
|
|
#include <sound/initval.h>
|
|
#include <sound/pcm_params.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/pxa2xx-lib.h>
|
|
#include <sound/dmaengine_pcm.h>
|
|
|
|
#include "pxa-ssp.h"
|
|
|
|
/*
|
|
* SSP audio private data
|
|
*/
|
|
struct ssp_priv {
|
|
struct ssp_device *ssp;
|
|
struct clk *extclk;
|
|
unsigned long ssp_clk;
|
|
unsigned int sysclk;
|
|
unsigned int dai_fmt;
|
|
unsigned int configured_dai_fmt;
|
|
#ifdef CONFIG_PM
|
|
uint32_t cr0;
|
|
uint32_t cr1;
|
|
uint32_t to;
|
|
uint32_t psp;
|
|
#endif
|
|
};
|
|
|
|
static void dump_registers(struct ssp_device *ssp)
|
|
{
|
|
dev_dbg(ssp->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n",
|
|
pxa_ssp_read_reg(ssp, SSCR0), pxa_ssp_read_reg(ssp, SSCR1),
|
|
pxa_ssp_read_reg(ssp, SSTO));
|
|
|
|
dev_dbg(ssp->dev, "SSPSP 0x%08x SSSR 0x%08x SSACD 0x%08x\n",
|
|
pxa_ssp_read_reg(ssp, SSPSP), pxa_ssp_read_reg(ssp, SSSR),
|
|
pxa_ssp_read_reg(ssp, SSACD));
|
|
}
|
|
|
|
static void pxa_ssp_enable(struct ssp_device *ssp)
|
|
{
|
|
uint32_t sscr0;
|
|
|
|
sscr0 = __raw_readl(ssp->mmio_base + SSCR0) | SSCR0_SSE;
|
|
__raw_writel(sscr0, ssp->mmio_base + SSCR0);
|
|
}
|
|
|
|
static void pxa_ssp_disable(struct ssp_device *ssp)
|
|
{
|
|
uint32_t sscr0;
|
|
|
|
sscr0 = __raw_readl(ssp->mmio_base + SSCR0) & ~SSCR0_SSE;
|
|
__raw_writel(sscr0, ssp->mmio_base + SSCR0);
|
|
}
|
|
|
|
static void pxa_ssp_set_dma_params(struct ssp_device *ssp, int width4,
|
|
int out, struct snd_dmaengine_dai_dma_data *dma)
|
|
{
|
|
dma->addr_width = width4 ? DMA_SLAVE_BUSWIDTH_4_BYTES :
|
|
DMA_SLAVE_BUSWIDTH_2_BYTES;
|
|
dma->maxburst = 16;
|
|
dma->addr = ssp->phys_base + SSDR;
|
|
}
|
|
|
|
static int pxa_ssp_startup(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
struct snd_dmaengine_dai_dma_data *dma;
|
|
int ret = 0;
|
|
|
|
if (!snd_soc_dai_active(cpu_dai)) {
|
|
clk_prepare_enable(ssp->clk);
|
|
pxa_ssp_disable(ssp);
|
|
}
|
|
|
|
if (priv->extclk)
|
|
clk_prepare_enable(priv->extclk);
|
|
|
|
dma = kzalloc(sizeof(struct snd_dmaengine_dai_dma_data), GFP_KERNEL);
|
|
if (!dma)
|
|
return -ENOMEM;
|
|
dma->chan_name = substream->stream == SNDRV_PCM_STREAM_PLAYBACK ?
|
|
"tx" : "rx";
|
|
|
|
snd_soc_dai_set_dma_data(cpu_dai, substream, dma);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void pxa_ssp_shutdown(struct snd_pcm_substream *substream,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
|
|
if (!snd_soc_dai_active(cpu_dai)) {
|
|
pxa_ssp_disable(ssp);
|
|
clk_disable_unprepare(ssp->clk);
|
|
}
|
|
|
|
if (priv->extclk)
|
|
clk_disable_unprepare(priv->extclk);
|
|
|
|
kfree(snd_soc_dai_get_dma_data(cpu_dai, substream));
|
|
snd_soc_dai_set_dma_data(cpu_dai, substream, NULL);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static int pxa_ssp_suspend(struct snd_soc_component *component)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_component_get_drvdata(component);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
|
|
if (!snd_soc_component_active(component))
|
|
clk_prepare_enable(ssp->clk);
|
|
|
|
priv->cr0 = __raw_readl(ssp->mmio_base + SSCR0);
|
|
priv->cr1 = __raw_readl(ssp->mmio_base + SSCR1);
|
|
priv->to = __raw_readl(ssp->mmio_base + SSTO);
|
|
priv->psp = __raw_readl(ssp->mmio_base + SSPSP);
|
|
|
|
pxa_ssp_disable(ssp);
|
|
clk_disable_unprepare(ssp->clk);
|
|
return 0;
|
|
}
|
|
|
|
static int pxa_ssp_resume(struct snd_soc_component *component)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_component_get_drvdata(component);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
uint32_t sssr = SSSR_ROR | SSSR_TUR | SSSR_BCE;
|
|
|
|
clk_prepare_enable(ssp->clk);
|
|
|
|
__raw_writel(sssr, ssp->mmio_base + SSSR);
|
|
__raw_writel(priv->cr0 & ~SSCR0_SSE, ssp->mmio_base + SSCR0);
|
|
__raw_writel(priv->cr1, ssp->mmio_base + SSCR1);
|
|
__raw_writel(priv->to, ssp->mmio_base + SSTO);
|
|
__raw_writel(priv->psp, ssp->mmio_base + SSPSP);
|
|
|
|
if (snd_soc_component_active(component))
|
|
pxa_ssp_enable(ssp);
|
|
else
|
|
clk_disable_unprepare(ssp->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
#define pxa_ssp_suspend NULL
|
|
#define pxa_ssp_resume NULL
|
|
#endif
|
|
|
|
/**
|
|
* ssp_set_clkdiv - set SSP clock divider
|
|
* @div: serial clock rate divider
|
|
*/
|
|
static void pxa_ssp_set_scr(struct ssp_device *ssp, u32 div)
|
|
{
|
|
u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
|
|
|
|
if (ssp->type == PXA25x_SSP) {
|
|
sscr0 &= ~0x0000ff00;
|
|
sscr0 |= ((div - 2)/2) << 8; /* 2..512 */
|
|
} else {
|
|
sscr0 &= ~0x000fff00;
|
|
sscr0 |= (div - 1) << 8; /* 1..4096 */
|
|
}
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0);
|
|
}
|
|
|
|
/*
|
|
* Set the SSP ports SYSCLK.
|
|
*/
|
|
static int pxa_ssp_set_dai_sysclk(struct snd_soc_dai *cpu_dai,
|
|
int clk_id, unsigned int freq, int dir)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
|
|
u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0) &
|
|
~(SSCR0_ECS | SSCR0_NCS | SSCR0_MOD | SSCR0_ACS);
|
|
|
|
if (priv->extclk) {
|
|
int ret;
|
|
|
|
/*
|
|
* For DT based boards, if an extclk is given, use it
|
|
* here and configure PXA_SSP_CLK_EXT.
|
|
*/
|
|
|
|
ret = clk_set_rate(priv->extclk, freq);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
clk_id = PXA_SSP_CLK_EXT;
|
|
}
|
|
|
|
dev_dbg(ssp->dev,
|
|
"pxa_ssp_set_dai_sysclk id: %d, clk_id %d, freq %u\n",
|
|
cpu_dai->id, clk_id, freq);
|
|
|
|
switch (clk_id) {
|
|
case PXA_SSP_CLK_NET_PLL:
|
|
sscr0 |= SSCR0_MOD;
|
|
break;
|
|
case PXA_SSP_CLK_PLL:
|
|
/* Internal PLL is fixed */
|
|
if (ssp->type == PXA25x_SSP)
|
|
priv->sysclk = 1843200;
|
|
else
|
|
priv->sysclk = 13000000;
|
|
break;
|
|
case PXA_SSP_CLK_EXT:
|
|
priv->sysclk = freq;
|
|
sscr0 |= SSCR0_ECS;
|
|
break;
|
|
case PXA_SSP_CLK_NET:
|
|
priv->sysclk = freq;
|
|
sscr0 |= SSCR0_NCS | SSCR0_MOD;
|
|
break;
|
|
case PXA_SSP_CLK_AUDIO:
|
|
priv->sysclk = 0;
|
|
pxa_ssp_set_scr(ssp, 1);
|
|
sscr0 |= SSCR0_ACS;
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* The SSP clock must be disabled when changing SSP clock mode
|
|
* on PXA2xx. On PXA3xx it must be enabled when doing so. */
|
|
if (ssp->type != PXA3xx_SSP)
|
|
clk_disable_unprepare(ssp->clk);
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0);
|
|
if (ssp->type != PXA3xx_SSP)
|
|
clk_prepare_enable(ssp->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Configure the PLL frequency pxa27x and (afaik - pxa320 only)
|
|
*/
|
|
static int pxa_ssp_set_pll(struct ssp_priv *priv, unsigned int freq)
|
|
{
|
|
struct ssp_device *ssp = priv->ssp;
|
|
u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70;
|
|
|
|
if (ssp->type == PXA3xx_SSP)
|
|
pxa_ssp_write_reg(ssp, SSACDD, 0);
|
|
|
|
switch (freq) {
|
|
case 5622000:
|
|
break;
|
|
case 11345000:
|
|
ssacd |= (0x1 << 4);
|
|
break;
|
|
case 12235000:
|
|
ssacd |= (0x2 << 4);
|
|
break;
|
|
case 14857000:
|
|
ssacd |= (0x3 << 4);
|
|
break;
|
|
case 32842000:
|
|
ssacd |= (0x4 << 4);
|
|
break;
|
|
case 48000000:
|
|
ssacd |= (0x5 << 4);
|
|
break;
|
|
case 0:
|
|
/* Disable */
|
|
break;
|
|
|
|
default:
|
|
/* PXA3xx has a clock ditherer which can be used to generate
|
|
* a wider range of frequencies - calculate a value for it.
|
|
*/
|
|
if (ssp->type == PXA3xx_SSP) {
|
|
u32 val;
|
|
u64 tmp = 19968;
|
|
|
|
tmp *= 1000000;
|
|
do_div(tmp, freq);
|
|
val = tmp;
|
|
|
|
val = (val << 16) | 64;
|
|
pxa_ssp_write_reg(ssp, SSACDD, val);
|
|
|
|
ssacd |= (0x6 << 4);
|
|
|
|
dev_dbg(ssp->dev,
|
|
"Using SSACDD %x to supply %uHz\n",
|
|
val, freq);
|
|
break;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
pxa_ssp_write_reg(ssp, SSACD, ssacd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set the active slots in TDM/Network mode
|
|
*/
|
|
static int pxa_ssp_set_dai_tdm_slot(struct snd_soc_dai *cpu_dai,
|
|
unsigned int tx_mask, unsigned int rx_mask, int slots, int slot_width)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
u32 sscr0;
|
|
|
|
sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
|
|
sscr0 &= ~(SSCR0_MOD | SSCR0_SlotsPerFrm(8) | SSCR0_EDSS | SSCR0_DSS);
|
|
|
|
/* set slot width */
|
|
if (slot_width > 16)
|
|
sscr0 |= SSCR0_EDSS | SSCR0_DataSize(slot_width - 16);
|
|
else
|
|
sscr0 |= SSCR0_DataSize(slot_width);
|
|
|
|
if (slots > 1) {
|
|
/* enable network mode */
|
|
sscr0 |= SSCR0_MOD;
|
|
|
|
/* set number of active slots */
|
|
sscr0 |= SSCR0_SlotsPerFrm(slots);
|
|
|
|
/* set active slot mask */
|
|
pxa_ssp_write_reg(ssp, SSTSA, tx_mask);
|
|
pxa_ssp_write_reg(ssp, SSRSA, rx_mask);
|
|
}
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Tristate the SSP DAI lines
|
|
*/
|
|
static int pxa_ssp_set_dai_tristate(struct snd_soc_dai *cpu_dai,
|
|
int tristate)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
u32 sscr1;
|
|
|
|
sscr1 = pxa_ssp_read_reg(ssp, SSCR1);
|
|
if (tristate)
|
|
sscr1 &= ~SSCR1_TTE;
|
|
else
|
|
sscr1 |= SSCR1_TTE;
|
|
pxa_ssp_write_reg(ssp, SSCR1, sscr1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pxa_ssp_set_dai_fmt(struct snd_soc_dai *cpu_dai,
|
|
unsigned int fmt)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Settings will be applied in hw_params() */
|
|
priv->dai_fmt = fmt;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Set up the SSP DAI format.
|
|
* The SSP Port must be inactive before calling this function as the
|
|
* physical interface format is changed.
|
|
*/
|
|
static int pxa_ssp_configure_dai_fmt(struct ssp_priv *priv)
|
|
{
|
|
struct ssp_device *ssp = priv->ssp;
|
|
u32 sscr0, sscr1, sspsp, scfr;
|
|
|
|
/* check if we need to change anything at all */
|
|
if (priv->configured_dai_fmt == priv->dai_fmt)
|
|
return 0;
|
|
|
|
/* reset port settings */
|
|
sscr0 = pxa_ssp_read_reg(ssp, SSCR0) &
|
|
~(SSCR0_PSP | SSCR0_MOD);
|
|
sscr1 = pxa_ssp_read_reg(ssp, SSCR1) &
|
|
~(SSCR1_SCLKDIR | SSCR1_SFRMDIR | SSCR1_SCFR |
|
|
SSCR1_RWOT | SSCR1_TRAIL | SSCR1_TFT | SSCR1_RFT);
|
|
sspsp = pxa_ssp_read_reg(ssp, SSPSP) &
|
|
~(SSPSP_SFRMP | SSPSP_SCMODE(3));
|
|
|
|
sscr1 |= SSCR1_RxTresh(8) | SSCR1_TxTresh(7);
|
|
|
|
switch (priv->dai_fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
sscr1 |= SSCR1_SCLKDIR | SSCR1_SFRMDIR | SSCR1_SCFR;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
sscr1 |= SSCR1_SCLKDIR | SSCR1_SCFR;
|
|
break;
|
|
case SND_SOC_DAIFMT_CBS_CFS:
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (priv->dai_fmt & SND_SOC_DAIFMT_INV_MASK) {
|
|
case SND_SOC_DAIFMT_NB_NF:
|
|
sspsp |= SSPSP_SFRMP;
|
|
break;
|
|
case SND_SOC_DAIFMT_NB_IF:
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_IF:
|
|
sspsp |= SSPSP_SCMODE(2);
|
|
break;
|
|
case SND_SOC_DAIFMT_IB_NF:
|
|
sspsp |= SSPSP_SCMODE(2) | SSPSP_SFRMP;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
sscr0 |= SSCR0_PSP;
|
|
sscr1 |= SSCR1_RWOT | SSCR1_TRAIL;
|
|
/* See hw_params() */
|
|
break;
|
|
|
|
case SND_SOC_DAIFMT_DSP_A:
|
|
sspsp |= SSPSP_FSRT;
|
|
/* fall through */
|
|
case SND_SOC_DAIFMT_DSP_B:
|
|
sscr0 |= SSCR0_MOD | SSCR0_PSP;
|
|
sscr1 |= SSCR1_TRAIL | SSCR1_RWOT;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0);
|
|
pxa_ssp_write_reg(ssp, SSCR1, sscr1);
|
|
pxa_ssp_write_reg(ssp, SSPSP, sspsp);
|
|
|
|
switch (priv->dai_fmt & SND_SOC_DAIFMT_MASTER_MASK) {
|
|
case SND_SOC_DAIFMT_CBM_CFM:
|
|
case SND_SOC_DAIFMT_CBM_CFS:
|
|
scfr = pxa_ssp_read_reg(ssp, SSCR1) | SSCR1_SCFR;
|
|
pxa_ssp_write_reg(ssp, SSCR1, scfr);
|
|
|
|
while (pxa_ssp_read_reg(ssp, SSSR) & SSSR_BSY)
|
|
cpu_relax();
|
|
break;
|
|
}
|
|
|
|
dump_registers(ssp);
|
|
|
|
/* Since we are configuring the timings for the format by hand
|
|
* we have to defer some things until hw_params() where we
|
|
* know parameters like the sample size.
|
|
*/
|
|
priv->configured_dai_fmt = priv->dai_fmt;
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct pxa_ssp_clock_mode {
|
|
int rate;
|
|
int pll;
|
|
u8 acds;
|
|
u8 scdb;
|
|
};
|
|
|
|
static const struct pxa_ssp_clock_mode pxa_ssp_clock_modes[] = {
|
|
{ .rate = 8000, .pll = 32842000, .acds = SSACD_ACDS_32, .scdb = SSACD_SCDB_4X },
|
|
{ .rate = 11025, .pll = 5622000, .acds = SSACD_ACDS_4, .scdb = SSACD_SCDB_4X },
|
|
{ .rate = 16000, .pll = 32842000, .acds = SSACD_ACDS_16, .scdb = SSACD_SCDB_4X },
|
|
{ .rate = 22050, .pll = 5622000, .acds = SSACD_ACDS_2, .scdb = SSACD_SCDB_4X },
|
|
{ .rate = 44100, .pll = 11345000, .acds = SSACD_ACDS_2, .scdb = SSACD_SCDB_4X },
|
|
{ .rate = 48000, .pll = 12235000, .acds = SSACD_ACDS_2, .scdb = SSACD_SCDB_4X },
|
|
{ .rate = 96000, .pll = 12235000, .acds = SSACD_ACDS_4, .scdb = SSACD_SCDB_1X },
|
|
{}
|
|
};
|
|
|
|
/*
|
|
* Set the SSP audio DMA parameters and sample size.
|
|
* Can be called multiple times by oss emulation.
|
|
*/
|
|
static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
|
|
struct snd_pcm_hw_params *params,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
int chn = params_channels(params);
|
|
u32 sscr0, sspsp;
|
|
int width = snd_pcm_format_physical_width(params_format(params));
|
|
int ttsa = pxa_ssp_read_reg(ssp, SSTSA) & 0xf;
|
|
struct snd_dmaengine_dai_dma_data *dma_data;
|
|
int rate = params_rate(params);
|
|
int bclk = rate * chn * (width / 8);
|
|
int ret;
|
|
|
|
dma_data = snd_soc_dai_get_dma_data(cpu_dai, substream);
|
|
|
|
/* Network mode with one active slot (ttsa == 1) can be used
|
|
* to force 16-bit frame width on the wire (for S16_LE), even
|
|
* with two channels. Use 16-bit DMA transfers for this case.
|
|
*/
|
|
pxa_ssp_set_dma_params(ssp,
|
|
((chn == 2) && (ttsa != 1)) || (width == 32),
|
|
substream->stream == SNDRV_PCM_STREAM_PLAYBACK, dma_data);
|
|
|
|
/* we can only change the settings if the port is not in use */
|
|
if (pxa_ssp_read_reg(ssp, SSCR0) & SSCR0_SSE)
|
|
return 0;
|
|
|
|
ret = pxa_ssp_configure_dai_fmt(priv);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
/* clear selected SSP bits */
|
|
sscr0 = pxa_ssp_read_reg(ssp, SSCR0) & ~(SSCR0_DSS | SSCR0_EDSS);
|
|
|
|
/* bit size */
|
|
switch (params_format(params)) {
|
|
case SNDRV_PCM_FORMAT_S16_LE:
|
|
if (ssp->type == PXA3xx_SSP)
|
|
sscr0 |= SSCR0_FPCKE;
|
|
sscr0 |= SSCR0_DataSize(16);
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S24_LE:
|
|
sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(8));
|
|
break;
|
|
case SNDRV_PCM_FORMAT_S32_LE:
|
|
sscr0 |= (SSCR0_EDSS | SSCR0_DataSize(16));
|
|
break;
|
|
}
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0);
|
|
|
|
if (sscr0 & SSCR0_ACS) {
|
|
ret = pxa_ssp_set_pll(priv, bclk);
|
|
|
|
/*
|
|
* If we were able to generate the bclk directly,
|
|
* all is fine. Otherwise, look up the closest rate
|
|
* from the table and also set the dividers.
|
|
*/
|
|
|
|
if (ret < 0) {
|
|
const struct pxa_ssp_clock_mode *m;
|
|
int ssacd, acds;
|
|
|
|
for (m = pxa_ssp_clock_modes; m->rate; m++) {
|
|
if (m->rate == rate)
|
|
break;
|
|
}
|
|
|
|
if (!m->rate)
|
|
return -EINVAL;
|
|
|
|
acds = m->acds;
|
|
|
|
/* The values in the table are for 16 bits */
|
|
if (width == 32)
|
|
acds--;
|
|
|
|
ret = pxa_ssp_set_pll(priv, bclk);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ssacd = pxa_ssp_read_reg(ssp, SSACD);
|
|
ssacd &= ~(SSACD_ACDS(7) | SSACD_SCDB_1X);
|
|
ssacd |= SSACD_ACDS(m->acds);
|
|
ssacd |= m->scdb;
|
|
pxa_ssp_write_reg(ssp, SSACD, ssacd);
|
|
}
|
|
} else if (sscr0 & SSCR0_ECS) {
|
|
/*
|
|
* For setups with external clocking, the PLL and its diviers
|
|
* are not active. Instead, the SCR bits in SSCR0 can be used
|
|
* to divide the clock.
|
|
*/
|
|
pxa_ssp_set_scr(ssp, bclk / rate);
|
|
}
|
|
|
|
switch (priv->dai_fmt & SND_SOC_DAIFMT_FORMAT_MASK) {
|
|
case SND_SOC_DAIFMT_I2S:
|
|
sspsp = pxa_ssp_read_reg(ssp, SSPSP);
|
|
|
|
if (((priv->sysclk / bclk) == 64) && (width == 16)) {
|
|
/* This is a special case where the bitclk is 64fs
|
|
* and we're not dealing with 2*32 bits of audio
|
|
* samples.
|
|
*
|
|
* The SSP values used for that are all found out by
|
|
* trying and failing a lot; some of the registers
|
|
* needed for that mode are only available on PXA3xx.
|
|
*/
|
|
if (ssp->type != PXA3xx_SSP)
|
|
return -EINVAL;
|
|
|
|
sspsp |= SSPSP_SFRMWDTH(width * 2);
|
|
sspsp |= SSPSP_SFRMDLY(width * 4);
|
|
sspsp |= SSPSP_EDMYSTOP(3);
|
|
sspsp |= SSPSP_DMYSTOP(3);
|
|
sspsp |= SSPSP_DMYSTRT(1);
|
|
} else {
|
|
/* The frame width is the width the LRCLK is
|
|
* asserted for; the delay is expressed in
|
|
* half cycle units. We need the extra cycle
|
|
* because the data starts clocking out one BCLK
|
|
* after LRCLK changes polarity.
|
|
*/
|
|
sspsp |= SSPSP_SFRMWDTH(width + 1);
|
|
sspsp |= SSPSP_SFRMDLY((width + 1) * 2);
|
|
sspsp |= SSPSP_DMYSTRT(1);
|
|
}
|
|
|
|
pxa_ssp_write_reg(ssp, SSPSP, sspsp);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* When we use a network mode, we always require TDM slots
|
|
* - complain loudly and fail if they've not been set up yet.
|
|
*/
|
|
if ((sscr0 & SSCR0_MOD) && !ttsa) {
|
|
dev_err(ssp->dev, "No TDM timeslot configured\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dump_registers(ssp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pxa_ssp_set_running_bit(struct snd_pcm_substream *substream,
|
|
struct ssp_device *ssp, int value)
|
|
{
|
|
uint32_t sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
|
|
uint32_t sscr1 = pxa_ssp_read_reg(ssp, SSCR1);
|
|
uint32_t sspsp = pxa_ssp_read_reg(ssp, SSPSP);
|
|
uint32_t sssr = pxa_ssp_read_reg(ssp, SSSR);
|
|
|
|
if (value && (sscr0 & SSCR0_SSE))
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0 & ~SSCR0_SSE);
|
|
|
|
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
|
|
if (value)
|
|
sscr1 |= SSCR1_TSRE;
|
|
else
|
|
sscr1 &= ~SSCR1_TSRE;
|
|
} else {
|
|
if (value)
|
|
sscr1 |= SSCR1_RSRE;
|
|
else
|
|
sscr1 &= ~SSCR1_RSRE;
|
|
}
|
|
|
|
pxa_ssp_write_reg(ssp, SSCR1, sscr1);
|
|
|
|
if (value) {
|
|
pxa_ssp_write_reg(ssp, SSSR, sssr);
|
|
pxa_ssp_write_reg(ssp, SSPSP, sspsp);
|
|
pxa_ssp_write_reg(ssp, SSCR0, sscr0 | SSCR0_SSE);
|
|
}
|
|
}
|
|
|
|
static int pxa_ssp_trigger(struct snd_pcm_substream *substream, int cmd,
|
|
struct snd_soc_dai *cpu_dai)
|
|
{
|
|
int ret = 0;
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(cpu_dai);
|
|
struct ssp_device *ssp = priv->ssp;
|
|
int val;
|
|
|
|
switch (cmd) {
|
|
case SNDRV_PCM_TRIGGER_RESUME:
|
|
pxa_ssp_enable(ssp);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
|
|
pxa_ssp_set_running_bit(substream, ssp, 1);
|
|
val = pxa_ssp_read_reg(ssp, SSSR);
|
|
pxa_ssp_write_reg(ssp, SSSR, val);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_START:
|
|
pxa_ssp_set_running_bit(substream, ssp, 1);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_STOP:
|
|
pxa_ssp_set_running_bit(substream, ssp, 0);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_SUSPEND:
|
|
pxa_ssp_disable(ssp);
|
|
break;
|
|
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
|
|
pxa_ssp_set_running_bit(substream, ssp, 0);
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
dump_registers(ssp);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int pxa_ssp_probe(struct snd_soc_dai *dai)
|
|
{
|
|
struct device *dev = dai->dev;
|
|
struct ssp_priv *priv;
|
|
int ret;
|
|
|
|
priv = kzalloc(sizeof(struct ssp_priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
if (dev->of_node) {
|
|
struct device_node *ssp_handle;
|
|
|
|
ssp_handle = of_parse_phandle(dev->of_node, "port", 0);
|
|
if (!ssp_handle) {
|
|
dev_err(dev, "unable to get 'port' phandle\n");
|
|
ret = -ENODEV;
|
|
goto err_priv;
|
|
}
|
|
|
|
priv->ssp = pxa_ssp_request_of(ssp_handle, "SoC audio");
|
|
if (priv->ssp == NULL) {
|
|
ret = -ENODEV;
|
|
goto err_priv;
|
|
}
|
|
|
|
priv->extclk = devm_clk_get(dev, "extclk");
|
|
if (IS_ERR(priv->extclk)) {
|
|
ret = PTR_ERR(priv->extclk);
|
|
if (ret == -EPROBE_DEFER)
|
|
return ret;
|
|
|
|
priv->extclk = NULL;
|
|
}
|
|
} else {
|
|
priv->ssp = pxa_ssp_request(dai->id + 1, "SoC audio");
|
|
if (priv->ssp == NULL) {
|
|
ret = -ENODEV;
|
|
goto err_priv;
|
|
}
|
|
}
|
|
|
|
priv->dai_fmt = (unsigned int) -1;
|
|
snd_soc_dai_set_drvdata(dai, priv);
|
|
|
|
return 0;
|
|
|
|
err_priv:
|
|
kfree(priv);
|
|
return ret;
|
|
}
|
|
|
|
static int pxa_ssp_remove(struct snd_soc_dai *dai)
|
|
{
|
|
struct ssp_priv *priv = snd_soc_dai_get_drvdata(dai);
|
|
|
|
pxa_ssp_free(priv->ssp);
|
|
kfree(priv);
|
|
return 0;
|
|
}
|
|
|
|
#define PXA_SSP_RATES (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_11025 |\
|
|
SNDRV_PCM_RATE_16000 | SNDRV_PCM_RATE_22050 | \
|
|
SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | \
|
|
SNDRV_PCM_RATE_48000 | SNDRV_PCM_RATE_64000 | \
|
|
SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000)
|
|
|
|
#define PXA_SSP_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
|
|
|
|
static const struct snd_soc_dai_ops pxa_ssp_dai_ops = {
|
|
.startup = pxa_ssp_startup,
|
|
.shutdown = pxa_ssp_shutdown,
|
|
.trigger = pxa_ssp_trigger,
|
|
.hw_params = pxa_ssp_hw_params,
|
|
.set_sysclk = pxa_ssp_set_dai_sysclk,
|
|
.set_fmt = pxa_ssp_set_dai_fmt,
|
|
.set_tdm_slot = pxa_ssp_set_dai_tdm_slot,
|
|
.set_tristate = pxa_ssp_set_dai_tristate,
|
|
};
|
|
|
|
static struct snd_soc_dai_driver pxa_ssp_dai = {
|
|
.probe = pxa_ssp_probe,
|
|
.remove = pxa_ssp_remove,
|
|
.playback = {
|
|
.channels_min = 1,
|
|
.channels_max = 8,
|
|
.rates = PXA_SSP_RATES,
|
|
.formats = PXA_SSP_FORMATS,
|
|
},
|
|
.capture = {
|
|
.channels_min = 1,
|
|
.channels_max = 8,
|
|
.rates = PXA_SSP_RATES,
|
|
.formats = PXA_SSP_FORMATS,
|
|
},
|
|
.ops = &pxa_ssp_dai_ops,
|
|
};
|
|
|
|
static const struct snd_soc_component_driver pxa_ssp_component = {
|
|
.name = "pxa-ssp",
|
|
.pcm_construct = pxa2xx_soc_pcm_new,
|
|
.pcm_destruct = pxa2xx_soc_pcm_free,
|
|
.open = pxa2xx_soc_pcm_open,
|
|
.close = pxa2xx_soc_pcm_close,
|
|
.hw_params = pxa2xx_soc_pcm_hw_params,
|
|
.hw_free = pxa2xx_soc_pcm_hw_free,
|
|
.prepare = pxa2xx_soc_pcm_prepare,
|
|
.trigger = pxa2xx_soc_pcm_trigger,
|
|
.pointer = pxa2xx_soc_pcm_pointer,
|
|
.mmap = pxa2xx_soc_pcm_mmap,
|
|
.suspend = pxa_ssp_suspend,
|
|
.resume = pxa_ssp_resume,
|
|
};
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id pxa_ssp_of_ids[] = {
|
|
{ .compatible = "mrvl,pxa-ssp-dai" },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, pxa_ssp_of_ids);
|
|
#endif
|
|
|
|
static int asoc_ssp_probe(struct platform_device *pdev)
|
|
{
|
|
return devm_snd_soc_register_component(&pdev->dev, &pxa_ssp_component,
|
|
&pxa_ssp_dai, 1);
|
|
}
|
|
|
|
static struct platform_driver asoc_ssp_driver = {
|
|
.driver = {
|
|
.name = "pxa-ssp-dai",
|
|
.of_match_table = of_match_ptr(pxa_ssp_of_ids),
|
|
},
|
|
|
|
.probe = asoc_ssp_probe,
|
|
};
|
|
|
|
module_platform_driver(asoc_ssp_driver);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
|
|
MODULE_DESCRIPTION("PXA SSP/PCM SoC Interface");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:pxa-ssp-dai");
|