mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 06:05:03 +07:00
55877f58b0
This patch adds the static MBus mappings for all supported SPI devices (8 per controller) for the direct access SPI mode. They can be configured and enabled by setting these MBus mapping in the 'ranges' property of the per-board 'soc' node. If nothing is changed here, the default 'normal' (indirect) SPI mode is used. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Gregory CLEMENT <gregory.clement@free-electrons.com> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Mark Brown <broonie@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
350 lines
9.0 KiB
Plaintext
350 lines
9.0 KiB
Plaintext
/*
|
|
* Device Tree Include file for Marvell Armada 370 and Armada XP SoC
|
|
*
|
|
* Copyright (C) 2012 Marvell
|
|
*
|
|
* Lior Amsalem <alior@marvell.com>
|
|
* Gregory CLEMENT <gregory.clement@free-electrons.com>
|
|
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
* Ben Dooks <ben.dooks@codethink.co.uk>
|
|
*
|
|
* This file is dual-licensed: you can use it either under the terms
|
|
* of the GPL or the X11 license, at your option. Note that this dual
|
|
* licensing only applies to this file, and not this project as a
|
|
* whole.
|
|
*
|
|
* a) This file is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of the
|
|
* License, or (at your option) any later version.
|
|
*
|
|
* This file is distributed in the hope that it will be useful
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* Or, alternatively
|
|
*
|
|
* b) Permission is hereby granted, free of charge, to any person
|
|
* obtaining a copy of this software and associated documentation
|
|
* files (the "Software"), to deal in the Software without
|
|
* restriction, including without limitation the rights to use
|
|
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
* sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following
|
|
* conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be
|
|
* included in all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
|
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
* OTHER DEALINGS IN THE SOFTWARE.
|
|
*
|
|
* This file contains the definitions that are common to the Armada
|
|
* 370 and Armada XP SoC.
|
|
*/
|
|
|
|
/include/ "skeleton64.dtsi"
|
|
|
|
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
|
|
|
|
/ {
|
|
model = "Marvell Armada 370 and XP SoC";
|
|
compatible = "marvell,armada-370-xp";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cpu@0 {
|
|
compatible = "marvell,sheeva-v7";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a9-pmu";
|
|
interrupts-extended = <&mpic 3>;
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
controller = <&mbusc>;
|
|
interrupt-parent = <&mpic>;
|
|
pcie-mem-aperture = <0xf8000000 0x7e00000>;
|
|
pcie-io-aperture = <0xffe00000 0x100000>;
|
|
|
|
devbus-bootcs {
|
|
compatible = "marvell,mvebu-devbus";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
|
|
ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
devbus-cs0 {
|
|
compatible = "marvell,mvebu-devbus";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
|
|
ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
devbus-cs1 {
|
|
compatible = "marvell,mvebu-devbus";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
|
|
ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
devbus-cs2 {
|
|
compatible = "marvell,mvebu-devbus";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
|
|
ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
devbus-cs3 {
|
|
compatible = "marvell,mvebu-devbus";
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
|
|
ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
internal-regs {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
|
|
|
|
rtc@10300 {
|
|
compatible = "marvell,orion-rtc";
|
|
reg = <0x10300 0x20>;
|
|
interrupts = <50>;
|
|
};
|
|
|
|
i2c0: i2c@11000 {
|
|
compatible = "marvell,mv64xxx-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <31>;
|
|
timeout-ms = <1000>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@11100 {
|
|
compatible = "marvell,mv64xxx-i2c";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <32>;
|
|
timeout-ms = <1000>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart0: serial@12000 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x12000 0x100>;
|
|
reg-shift = <2>;
|
|
interrupts = <41>;
|
|
reg-io-width = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@12100 {
|
|
compatible = "snps,dw-apb-uart";
|
|
reg = <0x12100 0x100>;
|
|
reg-shift = <2>;
|
|
interrupts = <42>;
|
|
reg-io-width = <1>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
pinctrl: pin-ctrl@18000 {
|
|
reg = <0x18000 0x38>;
|
|
};
|
|
|
|
coredivclk: corediv-clock@18740 {
|
|
compatible = "marvell,armada-370-corediv-clock";
|
|
reg = <0x18740 0xc>;
|
|
#clock-cells = <1>;
|
|
clocks = <&mainpll>;
|
|
clock-output-names = "nand";
|
|
};
|
|
|
|
mbusc: mbus-controller@20000 {
|
|
compatible = "marvell,mbus-controller";
|
|
reg = <0x20000 0x100>, <0x20180 0x20>,
|
|
<0x20250 0x8>;
|
|
};
|
|
|
|
mpic: interrupt-controller@20a00 {
|
|
compatible = "marvell,mpic";
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupt-controller;
|
|
msi-controller;
|
|
};
|
|
|
|
coherency-fabric@20200 {
|
|
compatible = "marvell,coherency-fabric";
|
|
reg = <0x20200 0xb0>, <0x21010 0x1c>;
|
|
};
|
|
|
|
timer@20300 {
|
|
reg = <0x20300 0x30>, <0x21040 0x30>;
|
|
interrupts = <37>, <38>, <39>, <40>, <5>, <6>;
|
|
};
|
|
|
|
watchdog@20300 {
|
|
reg = <0x20300 0x34>, <0x20704 0x4>;
|
|
};
|
|
|
|
pmsu@22000 {
|
|
compatible = "marvell,armada-370-pmsu";
|
|
reg = <0x22000 0x1000>;
|
|
};
|
|
|
|
usb@50000 {
|
|
compatible = "marvell,orion-ehci";
|
|
reg = <0x50000 0x500>;
|
|
interrupts = <45>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb@51000 {
|
|
compatible = "marvell,orion-ehci";
|
|
reg = <0x51000 0x500>;
|
|
interrupts = <46>;
|
|
status = "disabled";
|
|
};
|
|
|
|
eth0: ethernet@70000 {
|
|
reg = <0x70000 0x4000>;
|
|
interrupts = <8>;
|
|
clocks = <&gateclk 4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mdio: mdio {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "marvell,orion-mdio";
|
|
reg = <0x72004 0x4>;
|
|
clocks = <&gateclk 4>;
|
|
};
|
|
|
|
eth1: ethernet@74000 {
|
|
reg = <0x74000 0x4000>;
|
|
interrupts = <10>;
|
|
clocks = <&gateclk 3>;
|
|
status = "disabled";
|
|
};
|
|
|
|
sata@a0000 {
|
|
compatible = "marvell,armada-370-sata";
|
|
reg = <0xa0000 0x5000>;
|
|
interrupts = <55>;
|
|
clocks = <&gateclk 15>, <&gateclk 30>;
|
|
clock-names = "0", "1";
|
|
status = "disabled";
|
|
};
|
|
|
|
nand@d0000 {
|
|
compatible = "marvell,armada370-nand";
|
|
reg = <0xd0000 0x54>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
interrupts = <113>;
|
|
clocks = <&coredivclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mvsdio@d4000 {
|
|
compatible = "marvell,orion-sdio";
|
|
reg = <0xd4000 0x200>;
|
|
interrupts = <54>;
|
|
clocks = <&gateclk 17>;
|
|
bus-width = <4>;
|
|
cap-sdio-irq;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
spi0: spi@10600 {
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x28>, /* control */
|
|
<MBUS_ID(0x01, 0x1e) 0 0xffffffff>, /* CS0 */
|
|
<MBUS_ID(0x01, 0x5e) 0 0xffffffff>, /* CS1 */
|
|
<MBUS_ID(0x01, 0x9e) 0 0xffffffff>, /* CS2 */
|
|
<MBUS_ID(0x01, 0xde) 0 0xffffffff>, /* CS3 */
|
|
<MBUS_ID(0x01, 0x1f) 0 0xffffffff>, /* CS4 */
|
|
<MBUS_ID(0x01, 0x5f) 0 0xffffffff>, /* CS5 */
|
|
<MBUS_ID(0x01, 0x9f) 0 0xffffffff>, /* CS6 */
|
|
<MBUS_ID(0x01, 0xdf) 0 0xffffffff>; /* CS7 */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
interrupts = <30>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
spi1: spi@10680 {
|
|
reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x28>, /* control */
|
|
<MBUS_ID(0x01, 0x1a) 0 0xffffffff>, /* CS0 */
|
|
<MBUS_ID(0x01, 0x5a) 0 0xffffffff>, /* CS1 */
|
|
<MBUS_ID(0x01, 0x9a) 0 0xffffffff>, /* CS2 */
|
|
<MBUS_ID(0x01, 0xda) 0 0xffffffff>, /* CS3 */
|
|
<MBUS_ID(0x01, 0x1b) 0 0xffffffff>, /* CS4 */
|
|
<MBUS_ID(0x01, 0x5b) 0 0xffffffff>, /* CS5 */
|
|
<MBUS_ID(0x01, 0x9b) 0 0xffffffff>, /* CS6 */
|
|
<MBUS_ID(0x01, 0xdb) 0 0xffffffff>; /* CS7 */
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <1>;
|
|
interrupts = <92>;
|
|
clocks = <&coreclk 0>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
clocks {
|
|
/* 2 GHz fixed main PLL */
|
|
mainpll: mainpll {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <2000000000>;
|
|
};
|
|
};
|
|
};
|