linux_dsm_epyc7002/drivers/net/wireless/ti/wl18xx/tx.c
Maxim Altshul 88f07e70d1 wlcore/wl18xx: Add functionality to accept TX rate per link
FW will provide a TX rate per link for each FW status,
and wlcore will be able to store the information for
the use of the mesh hwmp module.

This is used mainly in mesh.
Rates are reported when a mesh interface is up.

Signed-off-by: Maxim Altshul <maxim.altshul@ti.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-18 22:35:34 +03:00

189 lines
5.3 KiB
C

/*
* This file is part of wl18xx
*
* Copyright (C) 2011 Texas Instruments Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#include "../wlcore/wlcore.h"
#include "../wlcore/cmd.h"
#include "../wlcore/debug.h"
#include "../wlcore/acx.h"
#include "../wlcore/tx.h"
#include "wl18xx.h"
#include "tx.h"
static
void wl18xx_get_last_tx_rate(struct wl1271 *wl, struct ieee80211_vif *vif,
u8 band, struct ieee80211_tx_rate *rate, u8 hlid)
{
u8 fw_rate = wl->links[hlid].fw_rate_idx;
if (fw_rate > CONF_HW_RATE_INDEX_MAX) {
wl1271_error("last Tx rate invalid: %d", fw_rate);
rate->idx = 0;
rate->flags = 0;
return;
}
if (fw_rate <= CONF_HW_RATE_INDEX_54MBPS) {
rate->idx = fw_rate;
if (band == NL80211_BAND_5GHZ)
rate->idx -= CONF_HW_RATE_INDEX_6MBPS;
rate->flags = 0;
} else {
rate->flags = IEEE80211_TX_RC_MCS;
rate->idx = fw_rate - CONF_HW_RATE_INDEX_MCS0;
/* SGI modifier is counted as a separate rate */
if (fw_rate >= CONF_HW_RATE_INDEX_MCS7_SGI)
(rate->idx)--;
if (fw_rate == CONF_HW_RATE_INDEX_MCS15_SGI)
(rate->idx)--;
/* this also covers the 40Mhz SGI case (= MCS15) */
if (fw_rate == CONF_HW_RATE_INDEX_MCS7_SGI ||
fw_rate == CONF_HW_RATE_INDEX_MCS15_SGI)
rate->flags |= IEEE80211_TX_RC_SHORT_GI;
if (fw_rate > CONF_HW_RATE_INDEX_MCS7_SGI && vif) {
struct wl12xx_vif *wlvif = wl12xx_vif_to_data(vif);
if (wlvif->channel_type == NL80211_CHAN_HT40MINUS ||
wlvif->channel_type == NL80211_CHAN_HT40PLUS) {
/* adjustment needed for range 0-7 */
rate->idx -= 8;
rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
}
}
}
}
static void wl18xx_tx_complete_packet(struct wl1271 *wl, u8 tx_stat_byte)
{
struct ieee80211_tx_info *info;
struct sk_buff *skb;
int id = tx_stat_byte & WL18XX_TX_STATUS_DESC_ID_MASK;
bool tx_success;
struct wl1271_tx_hw_descr *tx_desc;
/* check for id legality */
if (unlikely(id >= wl->num_tx_desc || wl->tx_frames[id] == NULL)) {
wl1271_warning("illegal id in tx completion: %d", id);
return;
}
/* a zero bit indicates Tx success */
tx_success = !(tx_stat_byte & BIT(WL18XX_TX_STATUS_STAT_BIT_IDX));
skb = wl->tx_frames[id];
info = IEEE80211_SKB_CB(skb);
tx_desc = (struct wl1271_tx_hw_descr *)skb->data;
if (wl12xx_is_dummy_packet(wl, skb)) {
wl1271_free_tx_id(wl, id);
return;
}
/* update the TX status info */
if (tx_success && !(info->flags & IEEE80211_TX_CTL_NO_ACK))
info->flags |= IEEE80211_TX_STAT_ACK;
/*
* first pass info->control.vif while it's valid, and then fill out
* the info->status structures
*/
wl18xx_get_last_tx_rate(wl, info->control.vif,
info->band,
&info->status.rates[0],
tx_desc->hlid);
info->status.rates[0].count = 1; /* no data about retries */
info->status.ack_signal = -1;
if (!tx_success)
wl->stats.retry_count++;
/*
* TODO: update sequence number for encryption? seems to be
* unsupported for now. needed for recovery with encryption.
*/
/* remove private header from packet */
skb_pull(skb, sizeof(struct wl1271_tx_hw_descr));
/* remove TKIP header space if present */
if ((wl->quirks & WLCORE_QUIRK_TKIP_HEADER_SPACE) &&
info->control.hw_key &&
info->control.hw_key->cipher == WLAN_CIPHER_SUITE_TKIP) {
int hdrlen = ieee80211_get_hdrlen_from_skb(skb);
memmove(skb->data + WL1271_EXTRA_SPACE_TKIP, skb->data, hdrlen);
skb_pull(skb, WL1271_EXTRA_SPACE_TKIP);
}
wl1271_debug(DEBUG_TX, "tx status id %u skb 0x%p success %d",
id, skb, tx_success);
/* return the packet to the stack */
skb_queue_tail(&wl->deferred_tx_queue, skb);
queue_work(wl->freezable_wq, &wl->netstack_work);
wl1271_free_tx_id(wl, id);
}
void wl18xx_tx_immediate_complete(struct wl1271 *wl)
{
struct wl18xx_fw_status_priv *status_priv =
(struct wl18xx_fw_status_priv *)wl->fw_status->priv;
struct wl18xx_priv *priv = wl->priv;
u8 i, hlid;
/* nothing to do here */
if (priv->last_fw_rls_idx == status_priv->fw_release_idx)
return;
/* update rates per link */
hlid = wl->fw_status->counters.hlid;
if (hlid < WLCORE_MAX_LINKS) {
wl->links[hlid].fw_rate_idx =
wl->fw_status->counters.tx_last_rate;
wl->links[hlid].fw_rate_mbps =
wl->fw_status->counters.tx_last_rate_mbps;
}
/* freed Tx descriptors */
wl1271_debug(DEBUG_TX, "last released desc = %d, current idx = %d",
priv->last_fw_rls_idx, status_priv->fw_release_idx);
if (status_priv->fw_release_idx >= WL18XX_FW_MAX_TX_STATUS_DESC) {
wl1271_error("invalid desc release index %d",
status_priv->fw_release_idx);
WARN_ON(1);
return;
}
for (i = priv->last_fw_rls_idx;
i != status_priv->fw_release_idx;
i = (i + 1) % WL18XX_FW_MAX_TX_STATUS_DESC) {
wl18xx_tx_complete_packet(wl,
status_priv->released_tx_desc[i]);
wl->tx_results_count++;
}
priv->last_fw_rls_idx = status_priv->fw_release_idx;
}