mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 21:32:21 +07:00
ca8e26a72d
This patch add dt bindings to support network driver based on Network Sub System (NSS) found on k2g SoC. This consists of bindings for netcp node, nss qmss , pktdma, cpsw 2u version of ethss and mdio. In order to support transitioning between non-promiscuous and promiscuous modes in K2G's ethernet switch, netcp ALE needs to be enabled. Therefore this patch enables K2G's netcp ALE for that purpose. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: WingMan Kwok <w-kwok2@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
627 lines
16 KiB
Plaintext
627 lines
16 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Device Tree Source for K2G SOC
|
|
*
|
|
* Copyright (C) 2016-2017 Texas Instruments Incorporated - http://www.ti.com/
|
|
*/
|
|
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/pinctrl/keystone.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
compatible = "ti,k2g","ti,keystone";
|
|
model = "Texas Instruments K2G SoC";
|
|
#address-cells = <2>;
|
|
#size-cells = <2>;
|
|
interrupt-parent = <&gic>;
|
|
|
|
chosen { };
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
i2c0 = &i2c0;
|
|
i2c1 = &i2c1;
|
|
i2c2 = &i2c2;
|
|
rproc0 = &dsp0;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
compatible = "arm,cortex-a15";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
gic: interrupt-controller@2561000 {
|
|
compatible = "arm,gic-400", "arm,cortex-a15-gic";
|
|
#interrupt-cells = <3>;
|
|
interrupt-controller;
|
|
reg = <0x0 0x02561000 0x0 0x1000>,
|
|
<0x0 0x02562000 0x0 0x2000>,
|
|
<0x0 0x02564000 0x0 0x2000>,
|
|
<0x0 0x02566000 0x0 0x2000>;
|
|
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) |
|
|
IRQ_TYPE_LEVEL_HIGH)>;
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts =
|
|
<GIC_PPI 13
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 14
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 11
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
|
|
<GIC_PPI 10
|
|
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a15-pmu";
|
|
interrupts = <GIC_SPI 4 IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
|
|
usbphy {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "simple-bus";
|
|
|
|
usb0_phy: usb-phy@0 {
|
|
compatible = "usb-nop-xceiv";
|
|
reg = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usb1_phy: usb-phy@1 {
|
|
compatible = "usb-nop-xceiv";
|
|
reg = <1>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
soc0: soc@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
#pinctrl-cells = <1>;
|
|
compatible = "ti,keystone","simple-bus";
|
|
ranges = <0x0 0x0 0x0 0xc0000000>;
|
|
dma-ranges = <0x80000000 0x8 0x00000000 0x80000000>;
|
|
|
|
msm_ram: msmram@c000000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0x0c000000 0x100000>;
|
|
ranges = <0x0 0x0c000000 0x100000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
sram-bm@f7000 {
|
|
reg = <0x000f7000 0x8000>;
|
|
};
|
|
};
|
|
|
|
k2g_pinctrl: pinmux@2621000 {
|
|
compatible = "pinctrl-single";
|
|
reg = <0x02621000 0x410>;
|
|
pinctrl-single,register-width = <32>;
|
|
pinctrl-single,function-mask = <0x001b0007>;
|
|
};
|
|
|
|
devctrl: device-state-control@2620000 {
|
|
compatible = "ti,keystone-devctrl", "syscon", "simple-mfd";
|
|
reg = <0x02620000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0x0 0x02620000 0x1000>;
|
|
|
|
kirq0: keystone_irq@2a0 {
|
|
compatible = "ti,keystone-irq";
|
|
reg = <0x2a0 0x10>;
|
|
interrupts = <GIC_SPI 1 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
ti,syscon-dev = <&devctrl 0x2a0>;
|
|
};
|
|
|
|
dspgpio0: keystone_dsp_gpio@240 {
|
|
compatible = "ti,keystone-dsp-gpio";
|
|
reg = <0x240 0x4>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
gpio,syscon-dev = <&devctrl 0x240>;
|
|
};
|
|
};
|
|
|
|
uart0: serial@2530c00 {
|
|
compatible = "ti,da830-uart", "ns16550a";
|
|
current-speed = <115200>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
reg = <0x02530c00 0x100>;
|
|
interrupts = <GIC_SPI 164 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&k2g_clks 0x2c 0>;
|
|
power-domains = <&k2g_pds 0x2c>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart1: serial@2531000 {
|
|
compatible = "ti,da830-uart", "ns16550a";
|
|
current-speed = <115200>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
reg = <0x02531000 0x100>;
|
|
interrupts = <GIC_SPI 165 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&k2g_clks 0x2d 0>;
|
|
power-domains = <&k2g_pds 0x2d>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@2531400 {
|
|
compatible = "ti,da830-uart", "ns16550a";
|
|
current-speed = <115200>;
|
|
reg-shift = <2>;
|
|
reg-io-width = <4>;
|
|
reg = <0x02531400 0x100>;
|
|
interrupts = <GIC_SPI 166 IRQ_TYPE_EDGE_RISING>;
|
|
clocks = <&k2g_clks 0x2e 0>;
|
|
power-domains = <&k2g_pds 0x2e>;
|
|
status = "disabled";
|
|
};
|
|
|
|
dcan0: can@260b200 {
|
|
compatible = "ti,am4372-d_can", "ti,am3352-d_can";
|
|
reg = <0x0260B200 0x200>;
|
|
interrupts = <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>;
|
|
status = "disabled";
|
|
power-domains = <&k2g_pds 0x0008>;
|
|
clocks = <&k2g_clks 0x0008 1>;
|
|
};
|
|
|
|
dcan1: can@260b400 {
|
|
compatible = "ti,am4372-d_can", "ti,am3352-d_can";
|
|
reg = <0x0260B400 0x200>;
|
|
interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
|
|
status = "disabled";
|
|
power-domains = <&k2g_pds 0x0009>;
|
|
clocks = <&k2g_clks 0x0009 1>;
|
|
};
|
|
|
|
i2c0: i2c@2530000 {
|
|
compatible = "ti,keystone-i2c";
|
|
reg = <0x02530000 0x400>;
|
|
clocks = <&k2g_clks 0x003a 0>;
|
|
power-domains = <&k2g_pds 0x003a>;
|
|
interrupts = <GIC_SPI 88 IRQ_TYPE_EDGE_RISING>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@2530400 {
|
|
compatible = "ti,keystone-i2c";
|
|
reg = <0x02530400 0x400>;
|
|
clocks = <&k2g_clks 0x003b 0>;
|
|
power-domains = <&k2g_pds 0x003b>;
|
|
interrupts = <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@2530800 {
|
|
compatible = "ti,keystone-i2c";
|
|
reg = <0x02530800 0x400>;
|
|
clocks = <&k2g_clks 0x003c 0>;
|
|
power-domains = <&k2g_pds 0x003c>;
|
|
interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
dsp0: dsp@10800000 {
|
|
compatible = "ti,k2g-dsp";
|
|
reg = <0x10800000 0x00100000>,
|
|
<0x10e00000 0x00008000>,
|
|
<0x10f00000 0x00008000>;
|
|
reg-names = "l2sram", "l1pram", "l1dram";
|
|
power-domains = <&k2g_pds 0x0046>;
|
|
ti,syscon-dev = <&devctrl 0x844>;
|
|
resets = <&k2g_reset 0x0046 0x1>;
|
|
interrupt-parent = <&kirq0>;
|
|
interrupts = <0 8>;
|
|
interrupt-names = "vring", "exception";
|
|
kick-gpios = <&dspgpio0 27 0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
msgmgr: msgmgr@2a00000 {
|
|
compatible = "ti,k2g-message-manager";
|
|
#mbox-cells = <2>;
|
|
reg-names = "queue_proxy_region",
|
|
"queue_state_debug_region";
|
|
reg = <0x02a00000 0x400000>, <0x028c3400 0x400>;
|
|
interrupt-names = "rx_005",
|
|
"rx_057";
|
|
interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
pmmc: pmmc@2921c00 {
|
|
compatible = "ti,k2g-sci";
|
|
/*
|
|
* In case of rare platforms that does not use k2g as
|
|
* system master, use /delete-property/
|
|
*/
|
|
ti,system-reboot-controller;
|
|
mbox-names = "rx", "tx";
|
|
mboxes= <&msgmgr 5 2>,
|
|
<&msgmgr 0 0>;
|
|
reg-names = "debug_messages";
|
|
reg = <0x02921c00 0x400>;
|
|
|
|
k2g_pds: power-controller {
|
|
compatible = "ti,sci-pm-domain";
|
|
#power-domain-cells = <1>;
|
|
};
|
|
|
|
k2g_clks: clocks {
|
|
compatible = "ti,k2g-sci-clk";
|
|
#clock-cells = <2>;
|
|
};
|
|
|
|
k2g_reset: reset-controller {
|
|
compatible = "ti,sci-reset";
|
|
#reset-cells = <2>;
|
|
};
|
|
};
|
|
|
|
gpio0: gpio@2603000 {
|
|
compatible = "ti,k2g-gpio", "ti,keystone-gpio";
|
|
reg = <0x02603000 0x100>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
interrupts = <GIC_SPI 432 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 433 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 434 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 435 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 436 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 437 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 438 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 439 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 440 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
ti,ngpio = <144>;
|
|
ti,davinci-gpio-unbanked = <0>;
|
|
clocks = <&k2g_clks 0x001b 0x0>;
|
|
clock-names = "gpio";
|
|
};
|
|
|
|
gpio1: gpio@260a000 {
|
|
compatible = "ti,k2g-gpio", "ti,keystone-gpio";
|
|
reg = <0x0260a000 0x100>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupts = <GIC_SPI 442 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 443 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 444 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 445 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 446 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
ti,ngpio = <68>;
|
|
ti,davinci-gpio-unbanked = <0>;
|
|
clocks = <&k2g_clks 0x001c 0x0>;
|
|
clock-names = "gpio";
|
|
};
|
|
|
|
edma0: edma@2700000 {
|
|
compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
|
|
reg = <0x02700000 0x8000>;
|
|
reg-names = "edma3_cc";
|
|
interrupts = <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 216 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 217 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "edma3_ccint", "emda3_mperr",
|
|
"edma3_ccerrint";
|
|
dma-requests = <64>;
|
|
#dma-cells = <2>;
|
|
|
|
ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
|
|
|
|
ti,edma-memcpy-channels = <32 33 34 35>;
|
|
|
|
power-domains = <&k2g_pds 0x3f>;
|
|
};
|
|
|
|
edma0_tptc0: tptc@2760000 {
|
|
compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
|
|
reg = <0x02760000 0x400>;
|
|
power-domains = <&k2g_pds 0x3f>;
|
|
};
|
|
|
|
edma0_tptc1: tptc@2768000 {
|
|
compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
|
|
reg = <0x02768000 0x400>;
|
|
power-domains = <&k2g_pds 0x3f>;
|
|
};
|
|
|
|
edma1: edma@2728000 {
|
|
compatible = "ti,k2g-edma3-tpcc", "ti,edma3-tpcc";
|
|
reg = <0x02728000 0x8000>;
|
|
reg-names = "edma3_cc";
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 219 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 220 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "edma3_ccint", "emda3_mperr",
|
|
"edma3_ccerrint";
|
|
dma-requests = <64>;
|
|
#dma-cells = <2>;
|
|
|
|
ti,tptcs = <&edma1_tptc0 7>, <&edma1_tptc1 0>;
|
|
|
|
/*
|
|
* memcpy is disabled, can be enabled with:
|
|
* ti,edma-memcpy-channels = <12 13 14 15>;
|
|
* for example.
|
|
*/
|
|
|
|
power-domains = <&k2g_pds 0x4f>;
|
|
};
|
|
|
|
edma1_tptc0: tptc@27b0000 {
|
|
compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
|
|
reg = <0x027b0000 0x400>;
|
|
power-domains = <&k2g_pds 0x4f>;
|
|
};
|
|
|
|
edma1_tptc1: tptc@27b8000 {
|
|
compatible = "ti,k2g-edma3-tptc", "ti,edma3-tptc";
|
|
reg = <0x027b8000 0x400>;
|
|
power-domains = <&k2g_pds 0x4f>;
|
|
};
|
|
|
|
mmc0: mmc@23000000 {
|
|
compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc";
|
|
reg = <0x23000000 0x400>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_EDGE_RISING>;
|
|
dmas = <&edma1 24 0>, <&edma1 25 0>;
|
|
dma-names = "tx", "rx";
|
|
bus-width = <4>;
|
|
ti,needs-special-reset;
|
|
no-1-8-v;
|
|
max-frequency = <96000000>;
|
|
power-domains = <&k2g_pds 0xb>;
|
|
clocks = <&k2g_clks 0xb 1>, <&k2g_clks 0xb 2>;
|
|
clock-names = "fck", "mmchsdb_fck";
|
|
status = "disabled";
|
|
};
|
|
|
|
mmc1: mmc@23100000 {
|
|
compatible = "ti,k2g-hsmmc", "ti,omap4-hsmmc";
|
|
reg = <0x23100000 0x400>;
|
|
interrupts = <GIC_SPI 97 IRQ_TYPE_EDGE_RISING>;
|
|
dmas = <&edma1 26 0>, <&edma1 27 0>;
|
|
dma-names = "tx", "rx";
|
|
bus-width = <8>;
|
|
ti,needs-special-reset;
|
|
max-frequency = <96000000>;
|
|
power-domains = <&k2g_pds 0xc>;
|
|
clocks = <&k2g_clks 0xc 1>, <&k2g_clks 0xc 2>;
|
|
clock-names = "fck", "mmchsdb_fck";
|
|
};
|
|
|
|
qspi: qspi@2940000 {
|
|
compatible = "ti,k2g-qspi", "cdns,qspi-nor";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x02940000 0x1000>,
|
|
<0x24000000 0x4000000>;
|
|
interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
|
|
cdns,fifo-depth = <256>;
|
|
cdns,fifo-width = <4>;
|
|
cdns,trigger-address = <0x24000000>;
|
|
clocks = <&k2g_clks 0x43 0x0>;
|
|
power-domains = <&k2g_pds 0x43>;
|
|
status = "disabled";
|
|
};
|
|
|
|
mcasp0: mcasp@2340000 {
|
|
compatible = "ti,am33xx-mcasp-audio";
|
|
reg = <0x02340000 0x2000>,
|
|
<0x21804000 0x1000>;
|
|
reg-names = "mpu","dat";
|
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "tx", "rx";
|
|
dmas = <&edma0 24 1>, <&edma0 25 1>;
|
|
dma-names = "tx", "rx";
|
|
power-domains = <&k2g_pds 0x4>;
|
|
clocks = <&k2g_clks 0x4 0>;
|
|
clock-names = "fck";
|
|
status = "disabled";
|
|
};
|
|
|
|
mcasp1: mcasp@2342000 {
|
|
compatible = "ti,am33xx-mcasp-audio";
|
|
reg = <0x02342000 0x2000>,
|
|
<0x21804400 0x1000>;
|
|
reg-names = "mpu","dat";
|
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "tx", "rx";
|
|
dmas = <&edma1 48 1>, <&edma1 49 1>;
|
|
dma-names = "tx", "rx";
|
|
power-domains = <&k2g_pds 0x5>;
|
|
clocks = <&k2g_clks 0x5 0>;
|
|
clock-names = "fck";
|
|
status = "disabled";
|
|
};
|
|
|
|
mcasp2: mcasp@2344000 {
|
|
compatible = "ti,am33xx-mcasp-audio";
|
|
reg = <0x02344000 0x2000>,
|
|
<0x21804800 0x1000>;
|
|
reg-names = "mpu","dat";
|
|
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "tx", "rx";
|
|
dmas = <&edma1 50 1>, <&edma1 51 1>;
|
|
dma-names = "tx", "rx";
|
|
power-domains = <&k2g_pds 0x6>;
|
|
clocks = <&k2g_clks 0x6 0>;
|
|
clock-names = "fck";
|
|
status = "disabled";
|
|
};
|
|
|
|
keystone_usb0: keystone-dwc3@2680000 {
|
|
compatible = "ti,keystone-dwc3";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x2680000 0x10000>;
|
|
interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
|
|
ranges;
|
|
dma-coherent;
|
|
dma-ranges;
|
|
status = "disabled";
|
|
power-domains = <&k2g_pds 0x0016>;
|
|
|
|
usb0: usb@2690000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x2690000 0x10000>;
|
|
interrupts = <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>;
|
|
maximum-speed = "high-speed";
|
|
dr_mode = "otg";
|
|
usb-phy = <&usb0_phy>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
keystone_usb1: keystone-dwc3@2580000 {
|
|
compatible = "ti,keystone-dwc3";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x2580000 0x10000>;
|
|
interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
|
|
ranges;
|
|
dma-coherent;
|
|
dma-ranges;
|
|
status = "disabled";
|
|
power-domains = <&k2g_pds 0x0017>;
|
|
|
|
usb1: usb@2590000 {
|
|
compatible = "snps,dwc3";
|
|
reg = <0x2590000 0x10000>;
|
|
interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
|
|
maximum-speed = "high-speed";
|
|
dr_mode = "otg";
|
|
usb-phy = <&usb1_phy>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
ecap0: pwm@21d1800 {
|
|
compatible = "ti,k2g-ecap", "ti,am3352-ecap";
|
|
#pwm-cells = <3>;
|
|
reg = <0x021d1800 0x60>;
|
|
power-domains = <&k2g_pds 0x38>;
|
|
clocks = <&k2g_clks 0x38 0>;
|
|
clock-names = "fck";
|
|
status = "disabled";
|
|
};
|
|
|
|
ecap1: pwm@21d1c00 {
|
|
compatible = "ti,k2g-ecap", "ti,am3352-ecap";
|
|
#pwm-cells = <3>;
|
|
reg = <0x021d1c00 0x60>;
|
|
power-domains = <&k2g_pds 0x39>;
|
|
clocks = <&k2g_clks 0x39 0x0>;
|
|
clock-names = "fck";
|
|
status = "disabled";
|
|
};
|
|
|
|
spi0: spi@21805400 {
|
|
compatible = "ti,keystone-spi";
|
|
reg = <0x21805400 0x200>;
|
|
num-cs = <4>;
|
|
ti,davinci-spi-intr-line = <0>;
|
|
interrupts = <GIC_SPI 64 IRQ_TYPE_EDGE_RISING>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
power-domains = <&k2g_pds 0x0010>;
|
|
clocks = <&k2g_clks 0x0010 0>;
|
|
};
|
|
|
|
spi1: spi@21805800 {
|
|
compatible = "ti,keystone-spi";
|
|
reg = <0x21805800 0x200>;
|
|
num-cs = <4>;
|
|
ti,davinci-spi-intr-line = <0>;
|
|
interrupts = <GIC_SPI 66 IRQ_TYPE_EDGE_RISING>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
power-domains = <&k2g_pds 0x0011>;
|
|
clocks = <&k2g_clks 0x0011 0>;
|
|
};
|
|
|
|
spi2: spi@21805c00 {
|
|
compatible = "ti,keystone-spi";
|
|
reg = <0x21805C00 0x200>;
|
|
num-cs = <4>;
|
|
ti,davinci-spi-intr-line = <0>;
|
|
interrupts = <GIC_SPI 68 IRQ_TYPE_EDGE_RISING>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
power-domains = <&k2g_pds 0x0012>;
|
|
clocks = <&k2g_clks 0x0012 0>;
|
|
};
|
|
|
|
spi3: spi@21806000 {
|
|
compatible = "ti,keystone-spi";
|
|
reg = <0x21806000 0x200>;
|
|
num-cs = <4>;
|
|
ti,davinci-spi-intr-line = <0>;
|
|
interrupts = <GIC_SPI 70 IRQ_TYPE_EDGE_RISING>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
power-domains = <&k2g_pds 0x0013>;
|
|
clocks = <&k2g_clks 0x0013 0>;
|
|
};
|
|
|
|
wdt: wdt@02250000 {
|
|
compatible = "ti,keystone-wdt", "ti,davinci-wdt";
|
|
reg = <0x02250000 0x80>;
|
|
power-domains = <&k2g_pds 0x22>;
|
|
clocks = <&k2g_clks 0x22 0>;
|
|
};
|
|
|
|
emif: emif@21010000 {
|
|
compatible = "ti,emif-keystone";
|
|
reg = <0x21010000 0x200>;
|
|
interrupts = <GIC_SPI 123 IRQ_TYPE_EDGE_RISING>;
|
|
};
|
|
|
|
mdio: mdio@4200f00 {
|
|
compatible = "ti,keystone_mdio", "ti,davinci_mdio";
|
|
reg = <0x04200f00 0x100>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&k2g_clks 0x0018 3>;
|
|
clock-names = "fck";
|
|
power-domains = <&k2g_pds 0x0018>;
|
|
status = "disabled";
|
|
bus_freq = <2500000>;
|
|
};
|
|
#include "keystone-k2g-netcp.dtsi"
|
|
};
|
|
};
|