Olof Johansson ca7964a247 i.MX6 device tree changes for 3.15: ... - A good number of new i.MX6 boards support: cm-fx6, dmo-edmqmx6, nitrogen6x, Gateworks Ventana gw5xxx family, DFI FS700-M60 and Zealz GK802 - Update imx6q-sabrelite device tree and add Dual Lite/Solo support - Move pins that are used by particular client device out of hog group - Use GPIO_6 for FEC interrupt to workaround a hardware bug (ERR006687 ENET: Only the ENET wake-up interrupt request can wake the system from Wait mode.) - Make pinctrl nodes board specific to avoid floating board specific device tree blob with so many unused pinctrl data - Use generic node name for fixed regulator - Update OPP table for cpufreq support - Random updates on various board device tree sources, adding pinctrl settings, device nodes, properties, etc. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) iQEcBAABAgAGBQJS+I4nAAoJEFBXWFqHsHzO39AIALs0nns7ew/KyO4brtDP/gpA dgTtpD5+eiddSng41aTun0WzUp/4r9iNL79lBfSUYJpo7+ZaQwpSlPbTz1wUMGtr mINmTXNXHHLCufm8ywQMYrajF+wQKXEMAJ7/OLyxFzQTwsKW9OWr4DLiTgvVLuKs IOD9scHe2KNRFJjfPmaS5w5W4h+Xs2VJO4mmCmy7zFgQ8MvIGpKGBZ3k3Y/c0Vqq w8VjL2RPnK9Q8C4sjweP7QRvdnFyn4ClVTPGFQ8c/xs7QqC7cVIc6FSqlXAvWVmx lnKv4y9+J4RyVGvQi9KwyscpEx1aD5xJv5hwl0MeoN8Kas9qhSfP9KfqWc9fL9I= =tiCP -----END PGP SIGNATURE----- Merge tag 'imx6-dt-3.15' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt Merge "i.MX6 device tree changes for 3.15" from Shawn Guo: - A good number of new i.MX6 boards support: cm-fx6, dmo-edmqmx6, nitrogen6x, Gateworks Ventana gw5xxx family, DFI FS700-M60 and Zealz GK802 - Update imx6q-sabrelite device tree and add Dual Lite/Solo support - Move pins that are used by particular client device out of hog group - Use GPIO_6 for FEC interrupt to workaround a hardware bug (ERR006687 ENET: Only the ENET wake-up interrupt request can wake the system from Wait mode.) - Make pinctrl nodes board specific to avoid floating board specific device tree blob with so many unused pinctrl data - Use generic node name for fixed regulator - Update OPP table for cpufreq support - Random updates on various board device tree sources, adding pinctrl settings, device nodes, properties, etc. * tag 'imx6-dt-3.15' of git://git.linaro.org/people/shawnguo/linux-2.6: (62 commits) ARM: dts: imx6q: Add support for Zealz GK802 ARM: dts: imx6: Add DFI FS700-M60 board support ARM: dts: imx6: use imx51-ssi ARM: dts: imx6qdl: Add mmc aliases ARM: dts: imx6q: Add spi4 alias ARM: dts: imx6qdl-sabreauto: Add LVDS support ARM: dts: imx6sl: add keypad support for i.mx6sl-evk board. ARM: dts: imx6sl: add ocram device support ARM: dts: imx6qdl: enable dma for spi ARM: dts: imx6qdl-sabresd: Add PFUZE100 support ARM: dts: imx6: add mxs phy controller id ARM: dts: imx6: add anatop phandle for usbphy ARM: dts: imx6q-arm2: use GPIO_6 for FEC interrupt. ARM: dts: imx6qdl-sabreauto: use GPIO_6 for FEC interrupt. ARM: dts: imx6qdl-sabrelite: use GPIO_6 for FEC interrupt. ARM: dts: imx6qdl: use interrupts-extended for fec ARM: dts: imx: pinfunc: add MX6QDL_PAD_GPIO_6__ENET_IRQ ARM: dts: imx6q-sabrelite: PHY reset is active-low ARM: dts: imx6: Use 'vddarm' as the regulator name ARM: dts: imx6qdl-sabresd: Add power key support ...		2014-02-20 00:49:36 -08:00
..
bootp
compressed	ARM: SoC platform changes for 3.14	2014-01-23 18:40:49 -08:00
dts	i.MX6 device tree changes for 3.15:	2014-02-20 00:49:36 -08:00
.gitignore
install.sh	arm, kbuild: make "make install" not depend on vmlinux	2013-10-02 22:30:35 +02:00
Makefile	arm, kbuild: make "make install" not depend on vmlinux	2013-10-02 22:30:35 +02:00