Gomella, Andrew (NIH/NHLBI) [F] 7138143972 USB: ftdi_sio: Add support for Newport CONEX motor drivers ... Here are two more devices that use FTDI USB-to-serial chips with new product ID's. The devices are the Newport Conex-AGP and Conex-CC motor controllers. (http://www.newport.com/CONEX-AGP-Integrated-Piezo-Motor-Rotation-Stages-/987623/1033/info.aspx) (http://www.newport.com/CONEX-CC-DC-Servo-Controller-Actuators/934114/1033/info.aspx) usb-devices command yields: P: Vendor=104d ProdID=3002 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-CC as well as P: Vendor=104d ProdID=3006 Rev=06.00 S: Manufacturer=Newport S: Product=CONEX-AGP Signed-off-by: Andrew Gomella <andrew.gomella@nih.gov> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2013-05-17 11:55:23 -07:00
..
aircable.c	TTY: switch tty_flip_buffer_push	2013-01-15 22:30:15 -08:00
ark3116.c	USB: ark3116: switch to generic TIOCMIWAIT implementation	2013-03-25 13:50:52 -07:00
belkin_sa.c	TTY: switch tty_flip_buffer_push	2013-01-15 22:30:15 -08:00
belkin_sa.h
bus.c	USB: serial: clean up usb-serial bus device removal	2013-03-25 13:48:27 -07:00
ch341.c	USB: ch341: fix TIOCMIWAIT and disconnect	2013-03-25 13:50:52 -07:00
console.c	USB merge for 3.7-rc1	2012-10-01 13:23:01 -07:00
cp210x.c	USB: cp210x: always disable uart on close	2013-03-25 13:54:30 -07:00
cyberjack.c	USB: cyberjack: fix disconnect handling	2013-03-25 13:48:26 -07:00
cypress_m8.c	USB: cypress_m8: remove bogus disconnect test from close	2013-03-25 13:54:30 -07:00
cypress_m8.h
digi_acceleport.c	USB patches for 3.10-rc1	2013-04-29 12:19:23 -07:00
empeg.c	USB: serial: remove driver version information	2012-10-31 12:48:06 -07:00
ezusb_convert.pl
f81232.c	USB: f81232: fix TIOCMIWAIT and disconnect	2013-03-25 13:50:52 -07:00
ftdi_sio_ids.h	USB: ftdi_sio: Add support for Newport CONEX motor drivers	2013-05-17 11:55:23 -07:00
ftdi_sio.c	USB: ftdi_sio: Add support for Newport CONEX motor drivers	2013-05-17 11:55:23 -07:00
ftdi_sio.h	USB: ftdi_sio: add support for FT-X series devices	2012-03-14 15:43:05 -07:00
funsoft.c	USB: serial: funsoft.c: remove debug module parameter	2012-09-14 12:31:27 -07:00
garmin_gps.c	USB: garmin_gps: remove bogus disconnect test in bulk callback	2013-03-25 13:54:32 -07:00
generic.c	USB: serial: add generic wait_until_sent implementation	2013-05-16 17:32:21 -07:00
hp4x.c	USB: serial: remove driver version information	2012-10-31 12:48:06 -07:00
io_16654.h
io_edgeport.c	USB patches for 3.10-rc1	2013-04-29 12:19:23 -07:00
io_edgeport.h
io_ionsp.h
io_tables.h	USB: io_edgeport: switch to generic TIOCMIWAIT implementation	2013-03-25 13:50:53 -07:00
io_ti.c	USB: io_ti: fix chars_in_buffer overhead	2013-05-16 17:32:22 -07:00
io_ti.h
io_usbvend.h
ipaq.c	USB: serial: remove driver version information	2012-10-31 12:48:06 -07:00
ipw.c	USB: serial: remove driver version information	2012-10-31 12:48:06 -07:00
ir-usb.c	TTY: switch tty_flip_buffer_push	2013-01-15 22:30:15 -08:00
iuu_phoenix.c	USB: iuu_phoenix: remove bogus disconnect test in close	2013-03-25 13:54:32 -07:00
iuu_phoenix.h
Kconfig	usb-serial: add support for USB Wishbone-serial adapters	2013-04-11 08:41:56 -07:00
keyspan_pda.c	USB patches for 3.10-rc1	2013-04-29 12:19:23 -07:00
keyspan_usa26msg.h
keyspan_usa28msg.h
keyspan_usa49msg.h
keyspan_usa67msg.h
keyspan_usa90msg.h
keyspan.c	USB patches for 3.10-rc1	2013-04-29 12:19:23 -07:00
keyspan.h	USB: keyspan: fix NULL-pointer dereferences and memory leaks	2012-10-25 09:37:13 -07:00
kl5kusb105.c	USB: kl5kusb105: always disable uart on close	2013-03-25 13:54:31 -07:00
kl5kusb105.h
kobil_sct.c	USB: kobil_sct: use port interrupt-out urb	2013-04-17 10:05:35 -07:00
kobil_sct.h
Makefile	usb-serial: add support for USB Wishbone-serial adapters	2013-04-11 08:41:56 -07:00
Makefile-keyspan_pda_fw
mct_u232.c	USB: mct_u232: clean up read implementation	2013-04-17 10:05:35 -07:00
mct_u232.h
metro-usb.c	USB: metro-usb: always disable uart on close	2013-03-25 13:54:31 -07:00
mos7720.c	USB patches for 3.10-rc1	2013-04-29 12:19:23 -07:00
mos7840.c	USB patches for 3.10-rc1	2013-04-29 12:19:23 -07:00
moto_modem.c	USB: serial: rework usb_serial_register/deregister_drivers()	2012-05-08 15:46:14 -07:00
navman.c	TTY: switch tty_flip_buffer_push	2013-01-15 22:30:15 -08:00
omninet.c	USB: omninet: switch to generic read implementation	2013-04-17 10:05:34 -07:00
opticon.c	USB: opticon: remove disconnect test from tiocmset	2013-03-25 13:54:31 -07:00
option.c	USB: option: add device IDs for Dell 5804 (Novatel E371) WWAN card	2013-05-16 18:04:16 -07:00
oti6858.c	USB: oti6858: fix TIOCMIWAIT and disconnect	2013-03-25 13:52:25 -07:00
oti6858.h
pl2303.c	USB: pl2303: remove disconnect test from tiocmset	2013-03-25 13:54:32 -07:00
pl2303.h	USB: serial: pl2303: rm duplicate id	2011-11-15 10:06:15 -08:00
qcaux.c	qcaux: add Franklin U600	2013-03-11 11:09:17 -07:00
qcserial.c	qcserial: bind to DM/DIAG port on Gobi 1K devices	2013-03-13 08:50:42 -07:00
quatech2.c	USB patches for 3.10-rc1	2013-04-29 12:19:23 -07:00
safe_serial.c	TTY: switch tty_flip_buffer_push	2013-01-15 22:30:15 -08:00
siemens_mpi.c	USB: serial: remove driver version information	2012-10-31 12:48:06 -07:00
sierra.c	USB patches for 3.10-rc1	2013-04-29 12:19:23 -07:00
spcp8x5.c	USB: spcp8x5: add proper modem-status support	2013-03-25 13:52:28 -07:00
ssu100.c	USB: ssu100: switch to generic TIOCMIWAIT implementation	2013-03-25 13:52:28 -07:00
symbolserial.c	USB: symbolserial: move private-data allocation to port_probe	2013-04-17 10:05:35 -07:00
ti_usb_3410_5052.c	USB: ti_usb_3410_5052: fix chars_in_buffer overhead	2013-05-16 17:32:22 -07:00
ti_usb_3410_5052.h	USB: serial: ti_usb_3410_5052: Add support for the FRI2 serial console	2012-05-11 15:14:07 -07:00
usb_debug.c	USB: serial: rework usb_serial_register/deregister_drivers()	2012-05-08 15:46:14 -07:00
usb_wwan.c	USB: usb_wwan: remove bogus disconnect test in close	2013-03-25 13:44:18 -07:00
usb-serial.c	USB: serial: clean up chars_in_buffer	2013-05-16 17:32:23 -07:00
usb-wwan.h	USB: usb-wwan: fix multiple memory leaks in error paths	2012-10-25 09:37:13 -07:00
visor.c	USB: visor: always disable uart on close	2013-03-25 13:54:32 -07:00
visor.h
vivopay-serial.c	USB: serial: remove driver version information	2012-10-31 12:48:06 -07:00
whiteheat.c	USB: whiteheat: fix port-data memory leak	2012-10-25 09:36:57 -07:00
whiteheat.h
wishbone-serial.c	USB: serial: wishbone-serial: fix up minor sparse warning	2013-04-11 08:45:34 -07:00
xsens_mt.c	usb: add driver for xsens motion trackers	2013-01-25 09:56:54 -08:00
zio.c	USB: serial: rework usb_serial_register/deregister_drivers()	2012-05-08 15:46:14 -07:00
zte_ev.c	USB: serial: add zte_ev.c driver	2012-09-13 10:15:14 -07:00