AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-28 11:18:45 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
ca3ba106a9
linux_dsm_epyc7002/drivers/net/ethernet/mediatek/mtk_eth_soc.h
Nelson Chang ca3ba106a9 net: ethernet: mediatek: bug fix to disable HW LRO 
(1) Modify the register settings for LRO relinquishments
(2) Jump out from the waiting loop while LRO relinquishments are done

Signed-off-by: Nelson Chang <nelson.chang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-09-27 09:41:31 -04:00

584 lines
17 KiB
C
Raw Blame History

/* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Copyright (C) 2009-2016 John Crispin <blogic@openwrt.org>
* Copyright (C) 2009-2016 Felix Fietkau <nbd@openwrt.org>
* Copyright (C) 2013-2016 Michael Lee <igvtee@gmail.com>
*/
#ifndef MTK_ETH_H
#define MTK_ETH_H
#define MTK_QDMA_PAGE_SIZE 2048
#define MTK_MAX_RX_LENGTH 1536
#define MTK_TX_DMA_BUF_LEN 0x3fff
#define MTK_DMA_SIZE 256
#define MTK_NAPI_WEIGHT 64
#define MTK_MAC_COUNT 2
#define MTK_RX_ETH_HLEN (VLAN_ETH_HLEN + VLAN_HLEN + ETH_FCS_LEN)
#define MTK_RX_HLEN (NET_SKB_PAD + MTK_RX_ETH_HLEN + NET_IP_ALIGN)
#define MTK_DMA_DUMMY_DESC 0xffffffff
#define MTK_DEFAULT_MSG_ENABLE (NETIF_MSG_DRV | \
NETIF_MSG_PROBE | \
NETIF_MSG_LINK | \
NETIF_MSG_TIMER | \
NETIF_MSG_IFDOWN | \
NETIF_MSG_IFUP | \
NETIF_MSG_RX_ERR | \
NETIF_MSG_TX_ERR)
#define MTK_HW_FEATURES (NETIF_F_IP_CSUM | \
NETIF_F_RXCSUM | \
NETIF_F_HW_VLAN_CTAG_TX | \
NETIF_F_HW_VLAN_CTAG_RX | \
NETIF_F_SG | NETIF_F_TSO | \
NETIF_F_TSO6 | \
NETIF_F_IPV6_CSUM)
#define NEXT_RX_DESP_IDX(X, Y) (((X) + 1) & ((Y) - 1))
#define MTK_MAX_RX_RING_NUM 4
#define MTK_HW_LRO_DMA_SIZE 8
#define MTK_MAX_LRO_RX_LENGTH (4096 * 3)
#define MTK_MAX_LRO_IP_CNT 2
#define MTK_HW_LRO_TIMER_UNIT 1 /* 20 us */
#define MTK_HW_LRO_REFRESH_TIME 50000 /* 1 sec. */
#define MTK_HW_LRO_AGG_TIME 10 /* 200us */
#define MTK_HW_LRO_AGE_TIME 50 /* 1ms */
#define MTK_HW_LRO_MAX_AGG_CNT 64
#define MTK_HW_LRO_BW_THRE 3000
#define MTK_HW_LRO_REPLACE_DELTA 1000
#define MTK_HW_LRO_SDL_REMAIN_ROOM 1522
/* Frame Engine Global Reset Register */
#define MTK_RST_GL 0x04
#define RST_GL_PSE BIT(0)
/* Frame Engine Interrupt Status Register */
#define MTK_INT_STATUS2 0x08
#define MTK_GDM1_AF BIT(28)
#define MTK_GDM2_AF BIT(29)
/* PDMA HW LRO Alter Flow Timer Register */
#define MTK_PDMA_LRO_ALT_REFRESH_TIMER 0x1c
/* Frame Engine Interrupt Grouping Register */
#define MTK_FE_INT_GRP 0x20
/* CDMP Exgress Control Register */
#define MTK_CDMP_EG_CTRL 0x404
/* GDM Exgress Control Register */
#define MTK_GDMA_FWD_CFG(x) (0x500 + (x * 0x1000))
#define MTK_GDMA_ICS_EN BIT(22)
#define MTK_GDMA_TCS_EN BIT(21)
#define MTK_GDMA_UCS_EN BIT(20)
/* Unicast Filter MAC Address Register - Low */
#define MTK_GDMA_MAC_ADRL(x) (0x508 + (x * 0x1000))
/* Unicast Filter MAC Address Register - High */
#define MTK_GDMA_MAC_ADRH(x) (0x50C + (x * 0x1000))
/* PDMA RX Base Pointer Register */
#define MTK_PRX_BASE_PTR0 0x900
#define MTK_PRX_BASE_PTR_CFG(x) (MTK_PRX_BASE_PTR0 + (x * 0x10))
/* PDMA RX Maximum Count Register */
#define MTK_PRX_MAX_CNT0 0x904
#define MTK_PRX_MAX_CNT_CFG(x) (MTK_PRX_MAX_CNT0 + (x * 0x10))
/* PDMA RX CPU Pointer Register */
#define MTK_PRX_CRX_IDX0 0x908
#define MTK_PRX_CRX_IDX_CFG(x) (MTK_PRX_CRX_IDX0 + (x * 0x10))
/* PDMA HW LRO Control Registers */
#define MTK_PDMA_LRO_CTRL_DW0 0x980
#define MTK_LRO_EN BIT(0)
#define MTK_L3_CKS_UPD_EN BIT(7)
#define MTK_LRO_ALT_PKT_CNT_MODE BIT(21)
#define MTK_LRO_RING_RELINQUISH_REQ (0x7 << 26)
#define MTK_LRO_RING_RELINQUISH_DONE (0x7 << 29)
#define MTK_PDMA_LRO_CTRL_DW1 0x984
#define MTK_PDMA_LRO_CTRL_DW2 0x988
#define MTK_PDMA_LRO_CTRL_DW3 0x98c
#define MTK_ADMA_MODE BIT(15)
#define MTK_LRO_MIN_RXD_SDL (MTK_HW_LRO_SDL_REMAIN_ROOM << 16)
/* PDMA Global Configuration Register */
#define MTK_PDMA_GLO_CFG 0xa04
#define MTK_MULTI_EN BIT(10)
/* PDMA Reset Index Register */
#define MTK_PDMA_RST_IDX 0xa08
#define MTK_PST_DRX_IDX0 BIT(16)
#define MTK_PST_DRX_IDX_CFG(x) (MTK_PST_DRX_IDX0 << (x))
/* PDMA Delay Interrupt Register */
#define MTK_PDMA_DELAY_INT 0xa0c
/* PDMA Interrupt Status Register */
#define MTK_PDMA_INT_STATUS 0xa20
/* PDMA Interrupt Mask Register */
#define MTK_PDMA_INT_MASK 0xa28
/* PDMA HW LRO Alter Flow Delta Register */
#define MTK_PDMA_LRO_ALT_SCORE_DELTA 0xa4c
/* PDMA Interrupt grouping registers */
#define MTK_PDMA_INT_GRP1 0xa50
#define MTK_PDMA_INT_GRP2 0xa54
/* PDMA HW LRO IP Setting Registers */
#define MTK_LRO_RX_RING0_DIP_DW0 0xb04
#define MTK_LRO_DIP_DW0_CFG(x) (MTK_LRO_RX_RING0_DIP_DW0 + (x * 0x40))
#define MTK_RING_MYIP_VLD BIT(9)
/* PDMA HW LRO Ring Control Registers */
#define MTK_LRO_RX_RING0_CTRL_DW1 0xb28
#define MTK_LRO_RX_RING0_CTRL_DW2 0xb2c
#define MTK_LRO_RX_RING0_CTRL_DW3 0xb30
#define MTK_LRO_CTRL_DW1_CFG(x) (MTK_LRO_RX_RING0_CTRL_DW1 + (x * 0x40))
#define MTK_LRO_CTRL_DW2_CFG(x) (MTK_LRO_RX_RING0_CTRL_DW2 + (x * 0x40))
#define MTK_LRO_CTRL_DW3_CFG(x) (MTK_LRO_RX_RING0_CTRL_DW3 + (x * 0x40))
#define MTK_RING_AGE_TIME_L ((MTK_HW_LRO_AGE_TIME & 0x3ff) << 22)
#define MTK_RING_AGE_TIME_H ((MTK_HW_LRO_AGE_TIME >> 10) & 0x3f)
#define MTK_RING_AUTO_LERAN_MODE (3 << 6)
#define MTK_RING_VLD BIT(8)
#define MTK_RING_MAX_AGG_TIME ((MTK_HW_LRO_AGG_TIME & 0xffff) << 10)
#define MTK_RING_MAX_AGG_CNT_L ((MTK_HW_LRO_MAX_AGG_CNT & 0x3f) << 26)
#define MTK_RING_MAX_AGG_CNT_H ((MTK_HW_LRO_MAX_AGG_CNT >> 6) & 0x3)
/* QDMA TX Queue Configuration Registers */
#define MTK_QTX_CFG(x) (0x1800 + (x * 0x10))
#define QDMA_RES_THRES 4
/* QDMA TX Queue Scheduler Registers */
#define MTK_QTX_SCH(x) (0x1804 + (x * 0x10))
/* QDMA RX Base Pointer Register */
#define MTK_QRX_BASE_PTR0 0x1900
/* QDMA RX Maximum Count Register */
#define MTK_QRX_MAX_CNT0 0x1904
/* QDMA RX CPU Pointer Register */
#define MTK_QRX_CRX_IDX0 0x1908
/* QDMA RX DMA Pointer Register */
#define MTK_QRX_DRX_IDX0 0x190C
/* QDMA Global Configuration Register */
#define MTK_QDMA_GLO_CFG 0x1A04
#define MTK_RX_2B_OFFSET BIT(31)
#define MTK_RX_BT_32DWORDS (3 << 11)
#define MTK_NDP_CO_PRO BIT(10)
#define MTK_TX_WB_DDONE BIT(6)
#define MTK_DMA_SIZE_16DWORDS (2 << 4)
#define MTK_RX_DMA_BUSY BIT(3)
#define MTK_TX_DMA_BUSY BIT(1)
#define MTK_RX_DMA_EN BIT(2)
#define MTK_TX_DMA_EN BIT(0)
#define MTK_DMA_BUSY_TIMEOUT HZ
/* QDMA Reset Index Register */
#define MTK_QDMA_RST_IDX 0x1A08
/* QDMA Delay Interrupt Register */
#define MTK_QDMA_DELAY_INT 0x1A0C
/* QDMA Flow Control Register */
#define MTK_QDMA_FC_THRES 0x1A10
#define FC_THRES_DROP_MODE BIT(20)
#define FC_THRES_DROP_EN (7 << 16)
#define FC_THRES_MIN 0x4444
/* QDMA Interrupt Status Register */
#define MTK_QMTK_INT_STATUS 0x1A18
#define MTK_RX_DONE_INT3 BIT(19)
#define MTK_RX_DONE_INT2 BIT(18)
#define MTK_RX_DONE_INT1 BIT(17)
#define MTK_RX_DONE_INT0 BIT(16)
#define MTK_TX_DONE_INT3 BIT(3)
#define MTK_TX_DONE_INT2 BIT(2)
#define MTK_TX_DONE_INT1 BIT(1)
#define MTK_TX_DONE_INT0 BIT(0)
#define MTK_RX_DONE_INT (MTK_RX_DONE_INT0 | MTK_RX_DONE_INT1 | \
MTK_RX_DONE_INT2 | MTK_RX_DONE_INT3)
#define MTK_TX_DONE_INT (MTK_TX_DONE_INT0 | MTK_TX_DONE_INT1 | \
MTK_TX_DONE_INT2 | MTK_TX_DONE_INT3)
/* QDMA Interrupt grouping registers */
#define MTK_QDMA_INT_GRP1 0x1a20
#define MTK_QDMA_INT_GRP2 0x1a24
#define MTK_RLS_DONE_INT BIT(0)
/* QDMA Interrupt Status Register */
#define MTK_QDMA_INT_MASK 0x1A1C
/* QDMA Interrupt Mask Register */
#define MTK_QDMA_HRED2 0x1A44
/* QDMA TX Forward CPU Pointer Register */
#define MTK_QTX_CTX_PTR 0x1B00
/* QDMA TX Forward DMA Pointer Register */
#define MTK_QTX_DTX_PTR 0x1B04
/* QDMA TX Release CPU Pointer Register */
#define MTK_QTX_CRX_PTR 0x1B10
/* QDMA TX Release DMA Pointer Register */
#define MTK_QTX_DRX_PTR 0x1B14
/* QDMA FQ Head Pointer Register */
#define MTK_QDMA_FQ_HEAD 0x1B20
/* QDMA FQ Head Pointer Register */
#define MTK_QDMA_FQ_TAIL 0x1B24
/* QDMA FQ Free Page Counter Register */
#define MTK_QDMA_FQ_CNT 0x1B28
/* QDMA FQ Free Page Buffer Length Register */
#define MTK_QDMA_FQ_BLEN 0x1B2C
/* GMA1 Received Good Byte Count Register */
#define MTK_GDM1_TX_GBCNT 0x2400
#define MTK_STAT_OFFSET 0x40
/* QDMA descriptor txd4 */
#define TX_DMA_CHKSUM (0x7 << 29)
#define TX_DMA_TSO BIT(28)
#define TX_DMA_FPORT_SHIFT 25
#define TX_DMA_FPORT_MASK 0x7
#define TX_DMA_INS_VLAN BIT(16)
/* QDMA descriptor txd3 */
#define TX_DMA_OWNER_CPU BIT(31)
#define TX_DMA_LS0 BIT(30)
#define TX_DMA_PLEN0(_x) (((_x) & MTK_TX_DMA_BUF_LEN) << 16)
#define TX_DMA_SWC BIT(14)
#define TX_DMA_SDL(_x) (((_x) & 0x3fff) << 16)
/* QDMA descriptor rxd2 */
#define RX_DMA_DONE BIT(31)
#define RX_DMA_PLEN0(_x) (((_x) & 0x3fff) << 16)
#define RX_DMA_GET_PLEN0(_x) (((_x) >> 16) & 0x3fff)
/* QDMA descriptor rxd3 */
#define RX_DMA_VID(_x) ((_x) & 0xfff)
/* QDMA descriptor rxd4 */
#define RX_DMA_L4_VALID BIT(24)
#define RX_DMA_FPORT_SHIFT 19
#define RX_DMA_FPORT_MASK 0x7
/* PHY Indirect Access Control registers */
#define MTK_PHY_IAC 0x10004
#define PHY_IAC_ACCESS BIT(31)
#define PHY_IAC_READ BIT(19)
#define PHY_IAC_WRITE BIT(18)
#define PHY_IAC_START BIT(16)
#define PHY_IAC_ADDR_SHIFT 20
#define PHY_IAC_REG_SHIFT 25
#define PHY_IAC_TIMEOUT HZ
/* Mac control registers */
#define MTK_MAC_MCR(x) (0x10100 + (x * 0x100))
#define MAC_MCR_MAX_RX_1536 BIT(24)
#define MAC_MCR_IPG_CFG (BIT(18) | BIT(16))
#define MAC_MCR_FORCE_MODE BIT(15)
#define MAC_MCR_TX_EN BIT(14)
#define MAC_MCR_RX_EN BIT(13)
#define MAC_MCR_BACKOFF_EN BIT(9)
#define MAC_MCR_BACKPR_EN BIT(8)
#define MAC_MCR_FORCE_RX_FC BIT(5)
#define MAC_MCR_FORCE_TX_FC BIT(4)
#define MAC_MCR_SPEED_1000 BIT(3)
#define MAC_MCR_SPEED_100 BIT(2)
#define MAC_MCR_FORCE_DPX BIT(1)
#define MAC_MCR_FORCE_LINK BIT(0)
#define MAC_MCR_FIXED_LINK (MAC_MCR_MAX_RX_1536 | MAC_MCR_IPG_CFG | \
MAC_MCR_FORCE_MODE | MAC_MCR_TX_EN | \
MAC_MCR_RX_EN | MAC_MCR_BACKOFF_EN | \
MAC_MCR_BACKPR_EN | MAC_MCR_FORCE_RX_FC | \
MAC_MCR_FORCE_TX_FC | MAC_MCR_SPEED_1000 | \
MAC_MCR_FORCE_DPX | MAC_MCR_FORCE_LINK)
/* TRGMII RXC control register */
#define TRGMII_RCK_CTRL 0x10300
#define DQSI0(x) ((x << 0) & GENMASK(6, 0))
#define DQSI1(x) ((x << 8) & GENMASK(14, 8))
#define RXCTL_DMWTLAT(x) ((x << 16) & GENMASK(18, 16))
#define RXC_DQSISEL BIT(30)
#define RCK_CTRL_RGMII_1000 (RXC_DQSISEL | RXCTL_DMWTLAT(2) | DQSI1(16))
#define RCK_CTRL_RGMII_10_100 RXCTL_DMWTLAT(2)
/* TRGMII RXC control register */
#define TRGMII_TCK_CTRL 0x10340
#define TXCTL_DMWTLAT(x) ((x << 16) & GENMASK(18, 16))
#define TXC_INV BIT(30)
#define TCK_CTRL_RGMII_1000 TXCTL_DMWTLAT(2)
#define TCK_CTRL_RGMII_10_100 (TXC_INV | TXCTL_DMWTLAT(2))
/* TRGMII Interface mode register */
#define INTF_MODE 0x10390
#define TRGMII_INTF_DIS BIT(0)
#define TRGMII_MODE BIT(1)
#define TRGMII_CENTRAL_ALIGNED BIT(2)
#define INTF_MODE_RGMII_1000 (TRGMII_MODE | TRGMII_CENTRAL_ALIGNED)
#define INTF_MODE_RGMII_10_100 0
/* GPIO port control registers for GMAC 2*/
#define GPIO_OD33_CTRL8 0x4c0
#define GPIO_BIAS_CTRL 0xed0
#define GPIO_DRV_SEL10 0xf00
/* ethernet subsystem config register */
#define ETHSYS_SYSCFG0 0x14
#define SYSCFG0_GE_MASK 0x3
#define SYSCFG0_GE_MODE(x, y) (x << (12 + (y * 2)))
/* ethernet subsystem clock register */
#define ETHSYS_CLKCFG0 0x2c
#define ETHSYS_TRGMII_CLK_SEL362_5 BIT(11)
/* ethernet reset control register */
#define ETHSYS_RSTCTRL 0x34
#define RSTCTRL_FE BIT(6)
#define RSTCTRL_PPE BIT(31)
struct mtk_rx_dma {
unsigned int rxd1;
unsigned int rxd2;
unsigned int rxd3;
unsigned int rxd4;
} __packed __aligned(4);
struct mtk_tx_dma {
unsigned int txd1;
unsigned int txd2;
unsigned int txd3;
unsigned int txd4;
} __packed __aligned(4);
struct mtk_eth;
struct mtk_mac;
/* struct mtk_hw_stats - the structure that holds the traffic statistics.
* @stats_lock: make sure that stats operations are atomic
* @reg_offset: the status register offset of the SoC
* @syncp: the refcount
*
* All of the supported SoCs have hardware counters for traffic statistics.
* Whenever the status IRQ triggers we can read the latest stats from these
* counters and store them in this struct.
*/
struct mtk_hw_stats {
u64 tx_bytes;
u64 tx_packets;
u64 tx_skip;
u64 tx_collisions;
u64 rx_bytes;
u64 rx_packets;
u64 rx_overflow;
u64 rx_fcs_errors;
u64 rx_short_errors;
u64 rx_long_errors;
u64 rx_checksum_errors;
u64 rx_flow_control_packets;
spinlock_t stats_lock;
u32 reg_offset;
struct u64_stats_sync syncp;
};
/* PDMA descriptor can point at 1-2 segments. This enum allows us to track how
* memory was allocated so that it can be freed properly
*/
enum mtk_tx_flags {
MTK_TX_FLAGS_SINGLE0 = 0x01,
MTK_TX_FLAGS_PAGE0 = 0x02,
};
/* This enum allows us to identify how the clock is defined on the array of the
* clock in the order
*/
enum mtk_clks_map {
MTK_CLK_ETHIF,
MTK_CLK_ESW,
MTK_CLK_GP1,
MTK_CLK_GP2,
MTK_CLK_TRGPLL,
MTK_CLK_MAX
};
enum mtk_dev_state {
MTK_HW_INIT,
MTK_RESETTING
};
/* struct mtk_tx_buf - This struct holds the pointers to the memory pointed at
* by the TX descriptor s
* @skb: The SKB pointer of the packet being sent
* @dma_addr0: The base addr of the first segment
* @dma_len0: The length of the first segment
* @dma_addr1: The base addr of the second segment
* @dma_len1: The length of the second segment
*/
struct mtk_tx_buf {
struct sk_buff *skb;
u32 flags;
DEFINE_DMA_UNMAP_ADDR(dma_addr0);
DEFINE_DMA_UNMAP_LEN(dma_len0);
DEFINE_DMA_UNMAP_ADDR(dma_addr1);
DEFINE_DMA_UNMAP_LEN(dma_len1);
};
/* struct mtk_tx_ring - This struct holds info describing a TX ring
* @dma: The descriptor ring
* @buf: The memory pointed at by the ring
* @phys: The physical addr of tx_buf
* @next_free: Pointer to the next free descriptor
* @last_free: Pointer to the last free descriptor
* @thresh: The threshold of minimum amount of free descriptors
* @free_count: QDMA uses a linked list. Track how many free descriptors
* are present
*/
struct mtk_tx_ring {
struct mtk_tx_dma *dma;
struct mtk_tx_buf *buf;
dma_addr_t phys;
struct mtk_tx_dma *next_free;
struct mtk_tx_dma *last_free;
u16 thresh;
atomic_t free_count;
};
/* PDMA rx ring mode */
enum mtk_rx_flags {
MTK_RX_FLAGS_NORMAL = 0,
MTK_RX_FLAGS_HWLRO,
};
/* struct mtk_rx_ring - This struct holds info describing a RX ring
* @dma: The descriptor ring
* @data: The memory pointed at by the ring
* @phys: The physical addr of rx_buf
* @frag_size: How big can each fragment be
* @buf_size: The size of each packet buffer
* @calc_idx: The current head of ring
*/
struct mtk_rx_ring {
struct mtk_rx_dma *dma;
u8 **data;
dma_addr_t phys;
u16 frag_size;
u16 buf_size;
u16 dma_size;
bool calc_idx_update;
u16 calc_idx;
u32 crx_idx_reg;
};
/* currently no SoC has more than 2 macs */
#define MTK_MAX_DEVS 2
/* struct mtk_eth - This is the main datasructure for holding the state
* of the driver
* @dev: The device pointer
* @base: The mapped register i/o base
* @page_lock: Make sure that register operations are atomic
* @dummy_dev: we run 2 netdevs on 1 physical DMA ring and need a
* dummy for NAPI to work
* @netdev: The netdev instances
* @mac: Each netdev is linked to a physical MAC
* @irq: The IRQ that we are using
* @msg_enable: Ethtool msg level
* @ethsys: The register map pointing at the range used to setup
* MII modes
* @pctl: The register map pointing at the range used to setup
* GMAC port drive/slew values
* @dma_refcnt: track how many netdevs are using the DMA engine
* @tx_ring: Pointer to the memore holding info about the TX ring
* @rx_ring: Pointer to the memore holding info about the RX ring
* @tx_napi: The TX NAPI struct
* @rx_napi: The RX NAPI struct
* @scratch_ring: Newer SoCs need memory for a second HW managed TX ring
* @phy_scratch_ring: physical address of scratch_ring
* @scratch_head: The scratch memory that scratch_ring points to.
* @clks: clock array for all clocks required
* @mii_bus: If there is a bus we need to create an instance for it
* @pending_work: The workqueue used to reset the dma ring
* @state Initialization and runtime state of the device.
*/
struct mtk_eth {
struct device *dev;
void __iomem *base;
spinlock_t page_lock;
spinlock_t irq_lock;
struct net_device dummy_dev;
struct net_device *netdev[MTK_MAX_DEVS];
struct mtk_mac *mac[MTK_MAX_DEVS];
int irq[3];
u32 msg_enable;
unsigned long sysclk;
struct regmap *ethsys;
struct regmap *pctl;
bool hwlro;
atomic_t dma_refcnt;
struct mtk_tx_ring tx_ring;
struct mtk_rx_ring rx_ring[MTK_MAX_RX_RING_NUM];
struct napi_struct tx_napi;
struct napi_struct rx_napi;
struct mtk_tx_dma *scratch_ring;
dma_addr_t phy_scratch_ring;
void *scratch_head;
struct clk *clks[MTK_CLK_MAX];
struct mii_bus *mii_bus;
struct work_struct pending_work;
unsigned long state;
};
/* struct mtk_mac - the structure that holds the info about the MACs of the
* SoC
* @id: The number of the MAC
* @ge_mode: Interface mode kept for setup restoring
* @of_node: Our devicetree node
* @hw: Backpointer to our main datastruture
* @hw_stats: Packet statistics counter
* @trgmii Indicate if the MAC uses TRGMII connected to internal
switch
*/
struct mtk_mac {
int id;
int ge_mode;
struct device_node *of_node;
struct mtk_eth *hw;
struct mtk_hw_stats *hw_stats;
__be32 hwlro_ip[MTK_MAX_LRO_IP_CNT];
int hwlro_ip_cnt;
bool trgmii;
};
/* the struct describing the SoC. these are declared in the soc_xyz.c files */
extern const struct of_device_id of_mtk_match[];
/* read the hardware status register */
void mtk_stats_update_mac(struct mtk_mac *mac);
void mtk_w32(struct mtk_eth *eth, u32 val, unsigned reg);
u32 mtk_r32(struct mtk_eth *eth, unsigned reg);
#endif /* MTK_ETH_H */
Reference in New Issue View Git Blame Copy Permalink