mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-27 04:20:51 +07:00
ca26d04143
The GPT is the GPT timer found on i.MX SoCs. This adds the missing GPT devicetree nodes. Also fixup the watchdog register map size along the way. it's 0x1000, not 0x4000. This didn't hurt before as the region was not occupied by another device, but now overlaps with the GPT. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
308 lines
6.9 KiB
Plaintext
308 lines
6.9 KiB
Plaintext
/*
|
|
* Copyright 2012 Sascha Hauer, Pengutronix
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include "skeleton.dtsi"
|
|
|
|
/ {
|
|
aliases {
|
|
serial0 = &uart1;
|
|
serial1 = &uart2;
|
|
serial2 = &uart3;
|
|
serial3 = &uart4;
|
|
serial4 = &uart5;
|
|
serial5 = &uart6;
|
|
gpio0 = &gpio1;
|
|
gpio1 = &gpio2;
|
|
gpio2 = &gpio3;
|
|
gpio3 = &gpio4;
|
|
gpio4 = &gpio5;
|
|
gpio5 = &gpio6;
|
|
};
|
|
|
|
avic: avic-interrupt-controller@e0000000 {
|
|
compatible = "fsl,imx27-avic", "fsl,avic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x10040000 0x1000>;
|
|
};
|
|
|
|
clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
osc26m {
|
|
compatible = "fsl,imx-osc26m", "fixed-clock";
|
|
clock-frequency = <26000000>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
interrupt-parent = <&avic>;
|
|
ranges;
|
|
|
|
aipi@10000000 { /* AIPI1 */
|
|
compatible = "fsl,aipi-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x10000000 0x20000>;
|
|
ranges;
|
|
|
|
wdog: wdog@10002000 {
|
|
compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
|
|
reg = <0x10002000 0x1000>;
|
|
interrupts = <27>;
|
|
clocks = <&clks 0>;
|
|
};
|
|
|
|
gpt1: timer@10003000 {
|
|
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
|
|
reg = <0x10003000 0x1000>;
|
|
interrupts = <26>;
|
|
};
|
|
|
|
gpt2: timer@10004000 {
|
|
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
|
|
reg = <0x10004000 0x1000>;
|
|
interrupts = <25>;
|
|
};
|
|
|
|
gpt3: timer@10005000 {
|
|
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
|
|
reg = <0x10005000 0x1000>;
|
|
interrupts = <24>;
|
|
};
|
|
|
|
uart1: serial@1000a000 {
|
|
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
|
|
reg = <0x1000a000 0x1000>;
|
|
interrupts = <20>;
|
|
clocks = <&clks 81>, <&clks 61>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@1000b000 {
|
|
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
|
|
reg = <0x1000b000 0x1000>;
|
|
interrupts = <19>;
|
|
clocks = <&clks 80>, <&clks 61>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@1000c000 {
|
|
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
|
|
reg = <0x1000c000 0x1000>;
|
|
interrupts = <18>;
|
|
clocks = <&clks 79>, <&clks 61>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@1000d000 {
|
|
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
|
|
reg = <0x1000d000 0x1000>;
|
|
interrupts = <17>;
|
|
clocks = <&clks 78>, <&clks 61>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
cspi1: cspi@1000e000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx27-cspi";
|
|
reg = <0x1000e000 0x1000>;
|
|
interrupts = <16>;
|
|
clocks = <&clks 53>, <&clks 0>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
cspi2: cspi@1000f000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx27-cspi";
|
|
reg = <0x1000f000 0x1000>;
|
|
interrupts = <15>;
|
|
clocks = <&clks 52>, <&clks 0>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@10012000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
|
|
reg = <0x10012000 0x1000>;
|
|
interrupts = <12>;
|
|
clocks = <&clks 40>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpio1: gpio@10015000 {
|
|
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
|
|
reg = <0x10015000 0x100>;
|
|
interrupts = <8>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio@10015100 {
|
|
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
|
|
reg = <0x10015100 0x100>;
|
|
interrupts = <8>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio3: gpio@10015200 {
|
|
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
|
|
reg = <0x10015200 0x100>;
|
|
interrupts = <8>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio4: gpio@10015300 {
|
|
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
|
|
reg = <0x10015300 0x100>;
|
|
interrupts = <8>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio5: gpio@10015400 {
|
|
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
|
|
reg = <0x10015400 0x100>;
|
|
interrupts = <8>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio6: gpio@10015500 {
|
|
compatible = "fsl,imx27-gpio", "fsl,imx21-gpio";
|
|
reg = <0x10015500 0x100>;
|
|
interrupts = <8>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
cspi3: cspi@10017000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx27-cspi";
|
|
reg = <0x10017000 0x1000>;
|
|
interrupts = <6>;
|
|
clocks = <&clks 51>, <&clks 0>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
gpt4: timer@10019000 {
|
|
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
|
|
reg = <0x10019000 0x1000>;
|
|
interrupts = <4>;
|
|
};
|
|
|
|
gpt5: timer@1001a000 {
|
|
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
|
|
reg = <0x1001a000 0x1000>;
|
|
interrupts = <3>;
|
|
};
|
|
|
|
uart5: serial@1001b000 {
|
|
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
|
|
reg = <0x1001b000 0x1000>;
|
|
interrupts = <49>;
|
|
clocks = <&clks 77>, <&clks 61>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart6: serial@1001c000 {
|
|
compatible = "fsl,imx27-uart", "fsl,imx21-uart";
|
|
reg = <0x1001c000 0x1000>;
|
|
interrupts = <48>;
|
|
clocks = <&clks 78>, <&clks 61>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@1001d000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx27-i2c", "fsl,imx21-i2c";
|
|
reg = <0x1001d000 0x1000>;
|
|
interrupts = <1>;
|
|
clocks = <&clks 39>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpt6: timer@1001f000 {
|
|
compatible = "fsl,imx27-gpt", "fsl,imx1-gpt";
|
|
reg = <0x1001f000 0x1000>;
|
|
interrupts = <2>;
|
|
};
|
|
};
|
|
|
|
aipi@10020000 { /* AIPI2 */
|
|
compatible = "fsl,aipi-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x10020000 0x20000>;
|
|
ranges;
|
|
|
|
fec: ethernet@1002b000 {
|
|
compatible = "fsl,imx27-fec";
|
|
reg = <0x1002b000 0x4000>;
|
|
interrupts = <50>;
|
|
clocks = <&clks 48>, <&clks 67>, <&clks 0>;
|
|
clock-names = "ipg", "ahb", "ptp";
|
|
status = "disabled";
|
|
};
|
|
|
|
clks: ccm@10027000{
|
|
compatible = "fsl,imx27-ccm";
|
|
reg = <0x10027000 0x1000>;
|
|
#clock-cells = <1>;
|
|
};
|
|
};
|
|
|
|
|
|
nfc: nand@d8000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
compatible = "fsl,imx27-nand";
|
|
reg = <0xd8000000 0x1000>;
|
|
interrupts = <29>;
|
|
clocks = <&clks 54>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|