mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-15 16:26:43 +07:00
28b665f6b8
Based on 1 normalized pattern(s): under gplv2 only extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 1 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Armijn Hemel <armijn@tjaldur.nl> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190531190114.847550565@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
1958 lines
52 KiB
C
1958 lines
52 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* at91 pinctrl driver based on at91 pinmux core
|
|
*
|
|
* Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/pinctrl/machine.h>
|
|
#include <linux/pinctrl/pinconf.h>
|
|
#include <linux/pinctrl/pinctrl.h>
|
|
#include <linux/pinctrl/pinmux.h>
|
|
/* Since we request GPIOs from ourself */
|
|
#include <linux/pinctrl/consumer.h>
|
|
|
|
#include "pinctrl-at91.h"
|
|
#include "core.h"
|
|
|
|
#define MAX_GPIO_BANKS 5
|
|
#define MAX_NB_GPIO_PER_BANK 32
|
|
|
|
struct at91_pinctrl_mux_ops;
|
|
|
|
struct at91_gpio_chip {
|
|
struct gpio_chip chip;
|
|
struct pinctrl_gpio_range range;
|
|
struct at91_gpio_chip *next; /* Bank sharing same clock */
|
|
int pioc_hwirq; /* PIO bank interrupt identifier on AIC */
|
|
int pioc_virq; /* PIO bank Linux virtual interrupt */
|
|
int pioc_idx; /* PIO bank index */
|
|
void __iomem *regbase; /* PIO bank virtual address */
|
|
struct clk *clock; /* associated clock */
|
|
struct at91_pinctrl_mux_ops *ops; /* ops */
|
|
};
|
|
|
|
static struct at91_gpio_chip *gpio_chips[MAX_GPIO_BANKS];
|
|
|
|
static int gpio_banks;
|
|
|
|
#define PULL_UP (1 << 0)
|
|
#define MULTI_DRIVE (1 << 1)
|
|
#define DEGLITCH (1 << 2)
|
|
#define PULL_DOWN (1 << 3)
|
|
#define DIS_SCHMIT (1 << 4)
|
|
#define DRIVE_STRENGTH_SHIFT 5
|
|
#define DRIVE_STRENGTH_MASK 0x3
|
|
#define DRIVE_STRENGTH (DRIVE_STRENGTH_MASK << DRIVE_STRENGTH_SHIFT)
|
|
#define OUTPUT (1 << 7)
|
|
#define OUTPUT_VAL_SHIFT 8
|
|
#define OUTPUT_VAL (0x1 << OUTPUT_VAL_SHIFT)
|
|
#define SLEWRATE_SHIFT 9
|
|
#define SLEWRATE_MASK 0x1
|
|
#define SLEWRATE (SLEWRATE_MASK << SLEWRATE_SHIFT)
|
|
#define DEBOUNCE (1 << 16)
|
|
#define DEBOUNCE_VAL_SHIFT 17
|
|
#define DEBOUNCE_VAL (0x3fff << DEBOUNCE_VAL_SHIFT)
|
|
|
|
/**
|
|
* These defines will translated the dt binding settings to our internal
|
|
* settings. They are not necessarily the same value as the register setting.
|
|
* The actual drive strength current of low, medium and high must be looked up
|
|
* from the corresponding device datasheet. This value is different for pins
|
|
* that are even in the same banks. It is also dependent on VCC.
|
|
* DRIVE_STRENGTH_DEFAULT is just a placeholder to avoid changing the drive
|
|
* strength when there is no dt config for it.
|
|
*/
|
|
enum drive_strength_bit {
|
|
DRIVE_STRENGTH_BIT_DEF,
|
|
DRIVE_STRENGTH_BIT_LOW,
|
|
DRIVE_STRENGTH_BIT_MED,
|
|
DRIVE_STRENGTH_BIT_HI,
|
|
};
|
|
|
|
#define DRIVE_STRENGTH_BIT_MSK(name) (DRIVE_STRENGTH_BIT_##name << \
|
|
DRIVE_STRENGTH_SHIFT)
|
|
|
|
enum slewrate_bit {
|
|
SLEWRATE_BIT_DIS,
|
|
SLEWRATE_BIT_ENA,
|
|
};
|
|
|
|
#define SLEWRATE_BIT_MSK(name) (SLEWRATE_BIT_##name << SLEWRATE_SHIFT)
|
|
|
|
/**
|
|
* struct at91_pmx_func - describes AT91 pinmux functions
|
|
* @name: the name of this specific function
|
|
* @groups: corresponding pin groups
|
|
* @ngroups: the number of groups
|
|
*/
|
|
struct at91_pmx_func {
|
|
const char *name;
|
|
const char **groups;
|
|
unsigned ngroups;
|
|
};
|
|
|
|
enum at91_mux {
|
|
AT91_MUX_GPIO = 0,
|
|
AT91_MUX_PERIPH_A = 1,
|
|
AT91_MUX_PERIPH_B = 2,
|
|
AT91_MUX_PERIPH_C = 3,
|
|
AT91_MUX_PERIPH_D = 4,
|
|
};
|
|
|
|
/**
|
|
* struct at91_pmx_pin - describes an At91 pin mux
|
|
* @bank: the bank of the pin
|
|
* @pin: the pin number in the @bank
|
|
* @mux: the mux mode : gpio or periph_x of the pin i.e. alternate function.
|
|
* @conf: the configuration of the pin: PULL_UP, MULTIDRIVE etc...
|
|
*/
|
|
struct at91_pmx_pin {
|
|
uint32_t bank;
|
|
uint32_t pin;
|
|
enum at91_mux mux;
|
|
unsigned long conf;
|
|
};
|
|
|
|
/**
|
|
* struct at91_pin_group - describes an At91 pin group
|
|
* @name: the name of this specific pin group
|
|
* @pins_conf: the mux mode for each pin in this group. The size of this
|
|
* array is the same as pins.
|
|
* @pins: an array of discrete physical pins used in this group, taken
|
|
* from the driver-local pin enumeration space
|
|
* @npins: the number of pins in this group array, i.e. the number of
|
|
* elements in .pins so we can iterate over that array
|
|
*/
|
|
struct at91_pin_group {
|
|
const char *name;
|
|
struct at91_pmx_pin *pins_conf;
|
|
unsigned int *pins;
|
|
unsigned npins;
|
|
};
|
|
|
|
/**
|
|
* struct at91_pinctrl_mux_ops - describes an AT91 mux ops group
|
|
* on new IP with support for periph C and D the way to mux in
|
|
* periph A and B has changed
|
|
* So provide the right call back
|
|
* if not present means the IP does not support it
|
|
* @get_periph: return the periph mode configured
|
|
* @mux_A_periph: mux as periph A
|
|
* @mux_B_periph: mux as periph B
|
|
* @mux_C_periph: mux as periph C
|
|
* @mux_D_periph: mux as periph D
|
|
* @get_deglitch: get deglitch status
|
|
* @set_deglitch: enable/disable deglitch
|
|
* @get_debounce: get debounce status
|
|
* @set_debounce: enable/disable debounce
|
|
* @get_pulldown: get pulldown status
|
|
* @set_pulldown: enable/disable pulldown
|
|
* @get_schmitt_trig: get schmitt trigger status
|
|
* @disable_schmitt_trig: disable schmitt trigger
|
|
* @irq_type: return irq type
|
|
*/
|
|
struct at91_pinctrl_mux_ops {
|
|
enum at91_mux (*get_periph)(void __iomem *pio, unsigned mask);
|
|
void (*mux_A_periph)(void __iomem *pio, unsigned mask);
|
|
void (*mux_B_periph)(void __iomem *pio, unsigned mask);
|
|
void (*mux_C_periph)(void __iomem *pio, unsigned mask);
|
|
void (*mux_D_periph)(void __iomem *pio, unsigned mask);
|
|
bool (*get_deglitch)(void __iomem *pio, unsigned pin);
|
|
void (*set_deglitch)(void __iomem *pio, unsigned mask, bool is_on);
|
|
bool (*get_debounce)(void __iomem *pio, unsigned pin, u32 *div);
|
|
void (*set_debounce)(void __iomem *pio, unsigned mask, bool is_on, u32 div);
|
|
bool (*get_pulldown)(void __iomem *pio, unsigned pin);
|
|
void (*set_pulldown)(void __iomem *pio, unsigned mask, bool is_on);
|
|
bool (*get_schmitt_trig)(void __iomem *pio, unsigned pin);
|
|
void (*disable_schmitt_trig)(void __iomem *pio, unsigned mask);
|
|
unsigned (*get_drivestrength)(void __iomem *pio, unsigned pin);
|
|
void (*set_drivestrength)(void __iomem *pio, unsigned pin,
|
|
u32 strength);
|
|
unsigned (*get_slewrate)(void __iomem *pio, unsigned pin);
|
|
void (*set_slewrate)(void __iomem *pio, unsigned pin, u32 slewrate);
|
|
/* irq */
|
|
int (*irq_type)(struct irq_data *d, unsigned type);
|
|
};
|
|
|
|
static int gpio_irq_type(struct irq_data *d, unsigned type);
|
|
static int alt_gpio_irq_type(struct irq_data *d, unsigned type);
|
|
|
|
struct at91_pinctrl {
|
|
struct device *dev;
|
|
struct pinctrl_dev *pctl;
|
|
|
|
int nactive_banks;
|
|
|
|
uint32_t *mux_mask;
|
|
int nmux;
|
|
|
|
struct at91_pmx_func *functions;
|
|
int nfunctions;
|
|
|
|
struct at91_pin_group *groups;
|
|
int ngroups;
|
|
|
|
struct at91_pinctrl_mux_ops *ops;
|
|
};
|
|
|
|
static inline const struct at91_pin_group *at91_pinctrl_find_group_by_name(
|
|
const struct at91_pinctrl *info,
|
|
const char *name)
|
|
{
|
|
const struct at91_pin_group *grp = NULL;
|
|
int i;
|
|
|
|
for (i = 0; i < info->ngroups; i++) {
|
|
if (strcmp(info->groups[i].name, name))
|
|
continue;
|
|
|
|
grp = &info->groups[i];
|
|
dev_dbg(info->dev, "%s: %d 0:%d\n", name, grp->npins, grp->pins[0]);
|
|
break;
|
|
}
|
|
|
|
return grp;
|
|
}
|
|
|
|
static int at91_get_groups_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return info->ngroups;
|
|
}
|
|
|
|
static const char *at91_get_group_name(struct pinctrl_dev *pctldev,
|
|
unsigned selector)
|
|
{
|
|
struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return info->groups[selector].name;
|
|
}
|
|
|
|
static int at91_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
|
|
const unsigned **pins,
|
|
unsigned *npins)
|
|
{
|
|
struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
if (selector >= info->ngroups)
|
|
return -EINVAL;
|
|
|
|
*pins = info->groups[selector].pins;
|
|
*npins = info->groups[selector].npins;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void at91_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
|
|
unsigned offset)
|
|
{
|
|
seq_printf(s, "%s", dev_name(pctldev->dev));
|
|
}
|
|
|
|
static int at91_dt_node_to_map(struct pinctrl_dev *pctldev,
|
|
struct device_node *np,
|
|
struct pinctrl_map **map, unsigned *num_maps)
|
|
{
|
|
struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
const struct at91_pin_group *grp;
|
|
struct pinctrl_map *new_map;
|
|
struct device_node *parent;
|
|
int map_num = 1;
|
|
int i;
|
|
|
|
/*
|
|
* first find the group of this node and check if we need to create
|
|
* config maps for pins
|
|
*/
|
|
grp = at91_pinctrl_find_group_by_name(info, np->name);
|
|
if (!grp) {
|
|
dev_err(info->dev, "unable to find group for node %pOFn\n",
|
|
np);
|
|
return -EINVAL;
|
|
}
|
|
|
|
map_num += grp->npins;
|
|
new_map = devm_kcalloc(pctldev->dev, map_num, sizeof(*new_map),
|
|
GFP_KERNEL);
|
|
if (!new_map)
|
|
return -ENOMEM;
|
|
|
|
*map = new_map;
|
|
*num_maps = map_num;
|
|
|
|
/* create mux map */
|
|
parent = of_get_parent(np);
|
|
if (!parent) {
|
|
devm_kfree(pctldev->dev, new_map);
|
|
return -EINVAL;
|
|
}
|
|
new_map[0].type = PIN_MAP_TYPE_MUX_GROUP;
|
|
new_map[0].data.mux.function = parent->name;
|
|
new_map[0].data.mux.group = np->name;
|
|
of_node_put(parent);
|
|
|
|
/* create config map */
|
|
new_map++;
|
|
for (i = 0; i < grp->npins; i++) {
|
|
new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN;
|
|
new_map[i].data.configs.group_or_pin =
|
|
pin_get_name(pctldev, grp->pins[i]);
|
|
new_map[i].data.configs.configs = &grp->pins_conf[i].conf;
|
|
new_map[i].data.configs.num_configs = 1;
|
|
}
|
|
|
|
dev_dbg(pctldev->dev, "maps: function %s group %s num %d\n",
|
|
(*map)->data.mux.function, (*map)->data.mux.group, map_num);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void at91_dt_free_map(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_map *map, unsigned num_maps)
|
|
{
|
|
}
|
|
|
|
static const struct pinctrl_ops at91_pctrl_ops = {
|
|
.get_groups_count = at91_get_groups_count,
|
|
.get_group_name = at91_get_group_name,
|
|
.get_group_pins = at91_get_group_pins,
|
|
.pin_dbg_show = at91_pin_dbg_show,
|
|
.dt_node_to_map = at91_dt_node_to_map,
|
|
.dt_free_map = at91_dt_free_map,
|
|
};
|
|
|
|
static void __iomem *pin_to_controller(struct at91_pinctrl *info,
|
|
unsigned int bank)
|
|
{
|
|
if (!gpio_chips[bank])
|
|
return NULL;
|
|
|
|
return gpio_chips[bank]->regbase;
|
|
}
|
|
|
|
static inline int pin_to_bank(unsigned pin)
|
|
{
|
|
return pin /= MAX_NB_GPIO_PER_BANK;
|
|
}
|
|
|
|
static unsigned pin_to_mask(unsigned int pin)
|
|
{
|
|
return 1 << pin;
|
|
}
|
|
|
|
static unsigned two_bit_pin_value_shift_amount(unsigned int pin)
|
|
{
|
|
/* return the shift value for a pin for "two bit" per pin registers,
|
|
* i.e. drive strength */
|
|
return 2*((pin >= MAX_NB_GPIO_PER_BANK/2)
|
|
? pin - MAX_NB_GPIO_PER_BANK/2 : pin);
|
|
}
|
|
|
|
static unsigned sama5d3_get_drive_register(unsigned int pin)
|
|
{
|
|
/* drive strength is split between two registers
|
|
* with two bits per pin */
|
|
return (pin >= MAX_NB_GPIO_PER_BANK/2)
|
|
? SAMA5D3_PIO_DRIVER2 : SAMA5D3_PIO_DRIVER1;
|
|
}
|
|
|
|
static unsigned at91sam9x5_get_drive_register(unsigned int pin)
|
|
{
|
|
/* drive strength is split between two registers
|
|
* with two bits per pin */
|
|
return (pin >= MAX_NB_GPIO_PER_BANK/2)
|
|
? AT91SAM9X5_PIO_DRIVER2 : AT91SAM9X5_PIO_DRIVER1;
|
|
}
|
|
|
|
static void at91_mux_disable_interrupt(void __iomem *pio, unsigned mask)
|
|
{
|
|
writel_relaxed(mask, pio + PIO_IDR);
|
|
}
|
|
|
|
static unsigned at91_mux_get_pullup(void __iomem *pio, unsigned pin)
|
|
{
|
|
return !((readl_relaxed(pio + PIO_PUSR) >> pin) & 0x1);
|
|
}
|
|
|
|
static void at91_mux_set_pullup(void __iomem *pio, unsigned mask, bool on)
|
|
{
|
|
if (on)
|
|
writel_relaxed(mask, pio + PIO_PPDDR);
|
|
|
|
writel_relaxed(mask, pio + (on ? PIO_PUER : PIO_PUDR));
|
|
}
|
|
|
|
static bool at91_mux_get_output(void __iomem *pio, unsigned int pin, bool *val)
|
|
{
|
|
*val = (readl_relaxed(pio + PIO_ODSR) >> pin) & 0x1;
|
|
return (readl_relaxed(pio + PIO_OSR) >> pin) & 0x1;
|
|
}
|
|
|
|
static void at91_mux_set_output(void __iomem *pio, unsigned int mask,
|
|
bool is_on, bool val)
|
|
{
|
|
writel_relaxed(mask, pio + (val ? PIO_SODR : PIO_CODR));
|
|
writel_relaxed(mask, pio + (is_on ? PIO_OER : PIO_ODR));
|
|
}
|
|
|
|
static unsigned at91_mux_get_multidrive(void __iomem *pio, unsigned pin)
|
|
{
|
|
return (readl_relaxed(pio + PIO_MDSR) >> pin) & 0x1;
|
|
}
|
|
|
|
static void at91_mux_set_multidrive(void __iomem *pio, unsigned mask, bool on)
|
|
{
|
|
writel_relaxed(mask, pio + (on ? PIO_MDER : PIO_MDDR));
|
|
}
|
|
|
|
static void at91_mux_set_A_periph(void __iomem *pio, unsigned mask)
|
|
{
|
|
writel_relaxed(mask, pio + PIO_ASR);
|
|
}
|
|
|
|
static void at91_mux_set_B_periph(void __iomem *pio, unsigned mask)
|
|
{
|
|
writel_relaxed(mask, pio + PIO_BSR);
|
|
}
|
|
|
|
static void at91_mux_pio3_set_A_periph(void __iomem *pio, unsigned mask)
|
|
{
|
|
|
|
writel_relaxed(readl_relaxed(pio + PIO_ABCDSR1) & ~mask,
|
|
pio + PIO_ABCDSR1);
|
|
writel_relaxed(readl_relaxed(pio + PIO_ABCDSR2) & ~mask,
|
|
pio + PIO_ABCDSR2);
|
|
}
|
|
|
|
static void at91_mux_pio3_set_B_periph(void __iomem *pio, unsigned mask)
|
|
{
|
|
writel_relaxed(readl_relaxed(pio + PIO_ABCDSR1) | mask,
|
|
pio + PIO_ABCDSR1);
|
|
writel_relaxed(readl_relaxed(pio + PIO_ABCDSR2) & ~mask,
|
|
pio + PIO_ABCDSR2);
|
|
}
|
|
|
|
static void at91_mux_pio3_set_C_periph(void __iomem *pio, unsigned mask)
|
|
{
|
|
writel_relaxed(readl_relaxed(pio + PIO_ABCDSR1) & ~mask, pio + PIO_ABCDSR1);
|
|
writel_relaxed(readl_relaxed(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2);
|
|
}
|
|
|
|
static void at91_mux_pio3_set_D_periph(void __iomem *pio, unsigned mask)
|
|
{
|
|
writel_relaxed(readl_relaxed(pio + PIO_ABCDSR1) | mask, pio + PIO_ABCDSR1);
|
|
writel_relaxed(readl_relaxed(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2);
|
|
}
|
|
|
|
static enum at91_mux at91_mux_pio3_get_periph(void __iomem *pio, unsigned mask)
|
|
{
|
|
unsigned select;
|
|
|
|
if (readl_relaxed(pio + PIO_PSR) & mask)
|
|
return AT91_MUX_GPIO;
|
|
|
|
select = !!(readl_relaxed(pio + PIO_ABCDSR1) & mask);
|
|
select |= (!!(readl_relaxed(pio + PIO_ABCDSR2) & mask) << 1);
|
|
|
|
return select + 1;
|
|
}
|
|
|
|
static enum at91_mux at91_mux_get_periph(void __iomem *pio, unsigned mask)
|
|
{
|
|
unsigned select;
|
|
|
|
if (readl_relaxed(pio + PIO_PSR) & mask)
|
|
return AT91_MUX_GPIO;
|
|
|
|
select = readl_relaxed(pio + PIO_ABSR) & mask;
|
|
|
|
return select + 1;
|
|
}
|
|
|
|
static bool at91_mux_get_deglitch(void __iomem *pio, unsigned pin)
|
|
{
|
|
return (readl_relaxed(pio + PIO_IFSR) >> pin) & 0x1;
|
|
}
|
|
|
|
static void at91_mux_set_deglitch(void __iomem *pio, unsigned mask, bool is_on)
|
|
{
|
|
writel_relaxed(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
|
|
}
|
|
|
|
static bool at91_mux_pio3_get_deglitch(void __iomem *pio, unsigned pin)
|
|
{
|
|
if ((readl_relaxed(pio + PIO_IFSR) >> pin) & 0x1)
|
|
return !((readl_relaxed(pio + PIO_IFSCSR) >> pin) & 0x1);
|
|
|
|
return false;
|
|
}
|
|
|
|
static void at91_mux_pio3_set_deglitch(void __iomem *pio, unsigned mask, bool is_on)
|
|
{
|
|
if (is_on)
|
|
writel_relaxed(mask, pio + PIO_IFSCDR);
|
|
at91_mux_set_deglitch(pio, mask, is_on);
|
|
}
|
|
|
|
static bool at91_mux_pio3_get_debounce(void __iomem *pio, unsigned pin, u32 *div)
|
|
{
|
|
*div = readl_relaxed(pio + PIO_SCDR);
|
|
|
|
return ((readl_relaxed(pio + PIO_IFSR) >> pin) & 0x1) &&
|
|
((readl_relaxed(pio + PIO_IFSCSR) >> pin) & 0x1);
|
|
}
|
|
|
|
static void at91_mux_pio3_set_debounce(void __iomem *pio, unsigned mask,
|
|
bool is_on, u32 div)
|
|
{
|
|
if (is_on) {
|
|
writel_relaxed(mask, pio + PIO_IFSCER);
|
|
writel_relaxed(div & PIO_SCDR_DIV, pio + PIO_SCDR);
|
|
writel_relaxed(mask, pio + PIO_IFER);
|
|
} else
|
|
writel_relaxed(mask, pio + PIO_IFSCDR);
|
|
}
|
|
|
|
static bool at91_mux_pio3_get_pulldown(void __iomem *pio, unsigned pin)
|
|
{
|
|
return !((readl_relaxed(pio + PIO_PPDSR) >> pin) & 0x1);
|
|
}
|
|
|
|
static void at91_mux_pio3_set_pulldown(void __iomem *pio, unsigned mask, bool is_on)
|
|
{
|
|
if (is_on)
|
|
writel_relaxed(mask, pio + PIO_PUDR);
|
|
|
|
writel_relaxed(mask, pio + (is_on ? PIO_PPDER : PIO_PPDDR));
|
|
}
|
|
|
|
static void at91_mux_pio3_disable_schmitt_trig(void __iomem *pio, unsigned mask)
|
|
{
|
|
writel_relaxed(readl_relaxed(pio + PIO_SCHMITT) | mask, pio + PIO_SCHMITT);
|
|
}
|
|
|
|
static bool at91_mux_pio3_get_schmitt_trig(void __iomem *pio, unsigned pin)
|
|
{
|
|
return (readl_relaxed(pio + PIO_SCHMITT) >> pin) & 0x1;
|
|
}
|
|
|
|
static inline u32 read_drive_strength(void __iomem *reg, unsigned pin)
|
|
{
|
|
unsigned tmp = readl_relaxed(reg);
|
|
|
|
tmp = tmp >> two_bit_pin_value_shift_amount(pin);
|
|
|
|
return tmp & DRIVE_STRENGTH_MASK;
|
|
}
|
|
|
|
static unsigned at91_mux_sama5d3_get_drivestrength(void __iomem *pio,
|
|
unsigned pin)
|
|
{
|
|
unsigned tmp = read_drive_strength(pio +
|
|
sama5d3_get_drive_register(pin), pin);
|
|
|
|
/* SAMA5 strength is 1:1 with our defines,
|
|
* except 0 is equivalent to low per datasheet */
|
|
if (!tmp)
|
|
tmp = DRIVE_STRENGTH_BIT_MSK(LOW);
|
|
|
|
return tmp;
|
|
}
|
|
|
|
static unsigned at91_mux_sam9x5_get_drivestrength(void __iomem *pio,
|
|
unsigned pin)
|
|
{
|
|
unsigned tmp = read_drive_strength(pio +
|
|
at91sam9x5_get_drive_register(pin), pin);
|
|
|
|
/* strength is inverse in SAM9x5s hardware with the pinctrl defines
|
|
* hardware: 0 = hi, 1 = med, 2 = low, 3 = rsvd */
|
|
tmp = DRIVE_STRENGTH_BIT_MSK(HI) - tmp;
|
|
|
|
return tmp;
|
|
}
|
|
|
|
static unsigned at91_mux_sam9x60_get_drivestrength(void __iomem *pio,
|
|
unsigned pin)
|
|
{
|
|
unsigned tmp = readl_relaxed(pio + SAM9X60_PIO_DRIVER1);
|
|
|
|
if (tmp & BIT(pin))
|
|
return DRIVE_STRENGTH_BIT_HI;
|
|
|
|
return DRIVE_STRENGTH_BIT_LOW;
|
|
}
|
|
|
|
static unsigned at91_mux_sam9x60_get_slewrate(void __iomem *pio, unsigned pin)
|
|
{
|
|
unsigned tmp = readl_relaxed(pio + SAM9X60_PIO_SLEWR);
|
|
|
|
if ((tmp & BIT(pin)))
|
|
return SLEWRATE_BIT_ENA;
|
|
|
|
return SLEWRATE_BIT_DIS;
|
|
}
|
|
|
|
static void set_drive_strength(void __iomem *reg, unsigned pin, u32 strength)
|
|
{
|
|
unsigned tmp = readl_relaxed(reg);
|
|
unsigned shift = two_bit_pin_value_shift_amount(pin);
|
|
|
|
tmp &= ~(DRIVE_STRENGTH_MASK << shift);
|
|
tmp |= strength << shift;
|
|
|
|
writel_relaxed(tmp, reg);
|
|
}
|
|
|
|
static void at91_mux_sama5d3_set_drivestrength(void __iomem *pio, unsigned pin,
|
|
u32 setting)
|
|
{
|
|
/* do nothing if setting is zero */
|
|
if (!setting)
|
|
return;
|
|
|
|
/* strength is 1 to 1 with setting for SAMA5 */
|
|
set_drive_strength(pio + sama5d3_get_drive_register(pin), pin, setting);
|
|
}
|
|
|
|
static void at91_mux_sam9x5_set_drivestrength(void __iomem *pio, unsigned pin,
|
|
u32 setting)
|
|
{
|
|
/* do nothing if setting is zero */
|
|
if (!setting)
|
|
return;
|
|
|
|
/* strength is inverse on SAM9x5s with our defines
|
|
* 0 = hi, 1 = med, 2 = low, 3 = rsvd */
|
|
setting = DRIVE_STRENGTH_BIT_MSK(HI) - setting;
|
|
|
|
set_drive_strength(pio + at91sam9x5_get_drive_register(pin), pin,
|
|
setting);
|
|
}
|
|
|
|
static void at91_mux_sam9x60_set_drivestrength(void __iomem *pio, unsigned pin,
|
|
u32 setting)
|
|
{
|
|
unsigned int tmp;
|
|
|
|
if (setting <= DRIVE_STRENGTH_BIT_DEF ||
|
|
setting == DRIVE_STRENGTH_BIT_MED ||
|
|
setting > DRIVE_STRENGTH_BIT_HI)
|
|
return;
|
|
|
|
tmp = readl_relaxed(pio + SAM9X60_PIO_DRIVER1);
|
|
|
|
/* Strength is 0: low, 1: hi */
|
|
if (setting == DRIVE_STRENGTH_BIT_LOW)
|
|
tmp &= ~BIT(pin);
|
|
else
|
|
tmp |= BIT(pin);
|
|
|
|
writel_relaxed(tmp, pio + SAM9X60_PIO_DRIVER1);
|
|
}
|
|
|
|
static void at91_mux_sam9x60_set_slewrate(void __iomem *pio, unsigned pin,
|
|
u32 setting)
|
|
{
|
|
unsigned int tmp;
|
|
|
|
if (setting < SLEWRATE_BIT_DIS || setting > SLEWRATE_BIT_ENA)
|
|
return;
|
|
|
|
tmp = readl_relaxed(pio + SAM9X60_PIO_SLEWR);
|
|
|
|
if (setting == SLEWRATE_BIT_DIS)
|
|
tmp &= ~BIT(pin);
|
|
else
|
|
tmp |= BIT(pin);
|
|
|
|
writel_relaxed(tmp, pio + SAM9X60_PIO_SLEWR);
|
|
}
|
|
|
|
static struct at91_pinctrl_mux_ops at91rm9200_ops = {
|
|
.get_periph = at91_mux_get_periph,
|
|
.mux_A_periph = at91_mux_set_A_periph,
|
|
.mux_B_periph = at91_mux_set_B_periph,
|
|
.get_deglitch = at91_mux_get_deglitch,
|
|
.set_deglitch = at91_mux_set_deglitch,
|
|
.irq_type = gpio_irq_type,
|
|
};
|
|
|
|
static struct at91_pinctrl_mux_ops at91sam9x5_ops = {
|
|
.get_periph = at91_mux_pio3_get_periph,
|
|
.mux_A_periph = at91_mux_pio3_set_A_periph,
|
|
.mux_B_periph = at91_mux_pio3_set_B_periph,
|
|
.mux_C_periph = at91_mux_pio3_set_C_periph,
|
|
.mux_D_periph = at91_mux_pio3_set_D_periph,
|
|
.get_deglitch = at91_mux_pio3_get_deglitch,
|
|
.set_deglitch = at91_mux_pio3_set_deglitch,
|
|
.get_debounce = at91_mux_pio3_get_debounce,
|
|
.set_debounce = at91_mux_pio3_set_debounce,
|
|
.get_pulldown = at91_mux_pio3_get_pulldown,
|
|
.set_pulldown = at91_mux_pio3_set_pulldown,
|
|
.get_schmitt_trig = at91_mux_pio3_get_schmitt_trig,
|
|
.disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig,
|
|
.get_drivestrength = at91_mux_sam9x5_get_drivestrength,
|
|
.set_drivestrength = at91_mux_sam9x5_set_drivestrength,
|
|
.irq_type = alt_gpio_irq_type,
|
|
};
|
|
|
|
static const struct at91_pinctrl_mux_ops sam9x60_ops = {
|
|
.get_periph = at91_mux_pio3_get_periph,
|
|
.mux_A_periph = at91_mux_pio3_set_A_periph,
|
|
.mux_B_periph = at91_mux_pio3_set_B_periph,
|
|
.mux_C_periph = at91_mux_pio3_set_C_periph,
|
|
.mux_D_periph = at91_mux_pio3_set_D_periph,
|
|
.get_deglitch = at91_mux_pio3_get_deglitch,
|
|
.set_deglitch = at91_mux_pio3_set_deglitch,
|
|
.get_debounce = at91_mux_pio3_get_debounce,
|
|
.set_debounce = at91_mux_pio3_set_debounce,
|
|
.get_pulldown = at91_mux_pio3_get_pulldown,
|
|
.set_pulldown = at91_mux_pio3_set_pulldown,
|
|
.get_schmitt_trig = at91_mux_pio3_get_schmitt_trig,
|
|
.disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig,
|
|
.get_drivestrength = at91_mux_sam9x60_get_drivestrength,
|
|
.set_drivestrength = at91_mux_sam9x60_set_drivestrength,
|
|
.get_slewrate = at91_mux_sam9x60_get_slewrate,
|
|
.set_slewrate = at91_mux_sam9x60_set_slewrate,
|
|
.irq_type = alt_gpio_irq_type,
|
|
|
|
};
|
|
|
|
static struct at91_pinctrl_mux_ops sama5d3_ops = {
|
|
.get_periph = at91_mux_pio3_get_periph,
|
|
.mux_A_periph = at91_mux_pio3_set_A_periph,
|
|
.mux_B_periph = at91_mux_pio3_set_B_periph,
|
|
.mux_C_periph = at91_mux_pio3_set_C_periph,
|
|
.mux_D_periph = at91_mux_pio3_set_D_periph,
|
|
.get_deglitch = at91_mux_pio3_get_deglitch,
|
|
.set_deglitch = at91_mux_pio3_set_deglitch,
|
|
.get_debounce = at91_mux_pio3_get_debounce,
|
|
.set_debounce = at91_mux_pio3_set_debounce,
|
|
.get_pulldown = at91_mux_pio3_get_pulldown,
|
|
.set_pulldown = at91_mux_pio3_set_pulldown,
|
|
.get_schmitt_trig = at91_mux_pio3_get_schmitt_trig,
|
|
.disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig,
|
|
.get_drivestrength = at91_mux_sama5d3_get_drivestrength,
|
|
.set_drivestrength = at91_mux_sama5d3_set_drivestrength,
|
|
.irq_type = alt_gpio_irq_type,
|
|
};
|
|
|
|
static void at91_pin_dbg(const struct device *dev, const struct at91_pmx_pin *pin)
|
|
{
|
|
if (pin->mux) {
|
|
dev_dbg(dev, "pio%c%d configured as periph%c with conf = 0x%lx\n",
|
|
pin->bank + 'A', pin->pin, pin->mux - 1 + 'A', pin->conf);
|
|
} else {
|
|
dev_dbg(dev, "pio%c%d configured as gpio with conf = 0x%lx\n",
|
|
pin->bank + 'A', pin->pin, pin->conf);
|
|
}
|
|
}
|
|
|
|
static int pin_check_config(struct at91_pinctrl *info, const char *name,
|
|
int index, const struct at91_pmx_pin *pin)
|
|
{
|
|
int mux;
|
|
|
|
/* check if it's a valid config */
|
|
if (pin->bank >= gpio_banks) {
|
|
dev_err(info->dev, "%s: pin conf %d bank_id %d >= nbanks %d\n",
|
|
name, index, pin->bank, gpio_banks);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!gpio_chips[pin->bank]) {
|
|
dev_err(info->dev, "%s: pin conf %d bank_id %d not enabled\n",
|
|
name, index, pin->bank);
|
|
return -ENXIO;
|
|
}
|
|
|
|
if (pin->pin >= MAX_NB_GPIO_PER_BANK) {
|
|
dev_err(info->dev, "%s: pin conf %d pin_bank_id %d >= %d\n",
|
|
name, index, pin->pin, MAX_NB_GPIO_PER_BANK);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!pin->mux)
|
|
return 0;
|
|
|
|
mux = pin->mux - 1;
|
|
|
|
if (mux >= info->nmux) {
|
|
dev_err(info->dev, "%s: pin conf %d mux_id %d >= nmux %d\n",
|
|
name, index, mux, info->nmux);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!(info->mux_mask[pin->bank * info->nmux + mux] & 1 << pin->pin)) {
|
|
dev_err(info->dev, "%s: pin conf %d mux_id %d not supported for pio%c%d\n",
|
|
name, index, mux, pin->bank + 'A', pin->pin);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void at91_mux_gpio_disable(void __iomem *pio, unsigned mask)
|
|
{
|
|
writel_relaxed(mask, pio + PIO_PDR);
|
|
}
|
|
|
|
static void at91_mux_gpio_enable(void __iomem *pio, unsigned mask, bool input)
|
|
{
|
|
writel_relaxed(mask, pio + PIO_PER);
|
|
writel_relaxed(mask, pio + (input ? PIO_ODR : PIO_OER));
|
|
}
|
|
|
|
static int at91_pmx_set(struct pinctrl_dev *pctldev, unsigned selector,
|
|
unsigned group)
|
|
{
|
|
struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
const struct at91_pmx_pin *pins_conf = info->groups[group].pins_conf;
|
|
const struct at91_pmx_pin *pin;
|
|
uint32_t npins = info->groups[group].npins;
|
|
int i, ret;
|
|
unsigned mask;
|
|
void __iomem *pio;
|
|
|
|
dev_dbg(info->dev, "enable function %s group %s\n",
|
|
info->functions[selector].name, info->groups[group].name);
|
|
|
|
/* first check that all the pins of the group are valid with a valid
|
|
* parameter */
|
|
for (i = 0; i < npins; i++) {
|
|
pin = &pins_conf[i];
|
|
ret = pin_check_config(info, info->groups[group].name, i, pin);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < npins; i++) {
|
|
pin = &pins_conf[i];
|
|
at91_pin_dbg(info->dev, pin);
|
|
pio = pin_to_controller(info, pin->bank);
|
|
|
|
if (!pio)
|
|
continue;
|
|
|
|
mask = pin_to_mask(pin->pin);
|
|
at91_mux_disable_interrupt(pio, mask);
|
|
switch (pin->mux) {
|
|
case AT91_MUX_GPIO:
|
|
at91_mux_gpio_enable(pio, mask, 1);
|
|
break;
|
|
case AT91_MUX_PERIPH_A:
|
|
info->ops->mux_A_periph(pio, mask);
|
|
break;
|
|
case AT91_MUX_PERIPH_B:
|
|
info->ops->mux_B_periph(pio, mask);
|
|
break;
|
|
case AT91_MUX_PERIPH_C:
|
|
if (!info->ops->mux_C_periph)
|
|
return -EINVAL;
|
|
info->ops->mux_C_periph(pio, mask);
|
|
break;
|
|
case AT91_MUX_PERIPH_D:
|
|
if (!info->ops->mux_D_periph)
|
|
return -EINVAL;
|
|
info->ops->mux_D_periph(pio, mask);
|
|
break;
|
|
}
|
|
if (pin->mux)
|
|
at91_mux_gpio_disable(pio, mask);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
|
|
{
|
|
struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return info->nfunctions;
|
|
}
|
|
|
|
static const char *at91_pmx_get_func_name(struct pinctrl_dev *pctldev,
|
|
unsigned selector)
|
|
{
|
|
struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
return info->functions[selector].name;
|
|
}
|
|
|
|
static int at91_pmx_get_groups(struct pinctrl_dev *pctldev, unsigned selector,
|
|
const char * const **groups,
|
|
unsigned * const num_groups)
|
|
{
|
|
struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
*groups = info->functions[selector].groups;
|
|
*num_groups = info->functions[selector].ngroups;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_gpio_request_enable(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_gpio_range *range,
|
|
unsigned offset)
|
|
{
|
|
struct at91_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
|
|
struct at91_gpio_chip *at91_chip;
|
|
struct gpio_chip *chip;
|
|
unsigned mask;
|
|
|
|
if (!range) {
|
|
dev_err(npct->dev, "invalid range\n");
|
|
return -EINVAL;
|
|
}
|
|
if (!range->gc) {
|
|
dev_err(npct->dev, "missing GPIO chip in range\n");
|
|
return -EINVAL;
|
|
}
|
|
chip = range->gc;
|
|
at91_chip = gpiochip_get_data(chip);
|
|
|
|
dev_dbg(npct->dev, "enable pin %u as GPIO\n", offset);
|
|
|
|
mask = 1 << (offset - chip->base);
|
|
|
|
dev_dbg(npct->dev, "enable pin %u as PIO%c%d 0x%x\n",
|
|
offset, 'A' + range->id, offset - chip->base, mask);
|
|
|
|
writel_relaxed(mask, at91_chip->regbase + PIO_PER);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void at91_gpio_disable_free(struct pinctrl_dev *pctldev,
|
|
struct pinctrl_gpio_range *range,
|
|
unsigned offset)
|
|
{
|
|
struct at91_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
|
|
|
|
dev_dbg(npct->dev, "disable pin %u as GPIO\n", offset);
|
|
/* Set the pin to some default state, GPIO is usually default */
|
|
}
|
|
|
|
static const struct pinmux_ops at91_pmx_ops = {
|
|
.get_functions_count = at91_pmx_get_funcs_count,
|
|
.get_function_name = at91_pmx_get_func_name,
|
|
.get_function_groups = at91_pmx_get_groups,
|
|
.set_mux = at91_pmx_set,
|
|
.gpio_request_enable = at91_gpio_request_enable,
|
|
.gpio_disable_free = at91_gpio_disable_free,
|
|
};
|
|
|
|
static int at91_pinconf_get(struct pinctrl_dev *pctldev,
|
|
unsigned pin_id, unsigned long *config)
|
|
{
|
|
struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
void __iomem *pio;
|
|
unsigned pin;
|
|
int div;
|
|
bool out;
|
|
|
|
*config = 0;
|
|
dev_dbg(info->dev, "%s:%d, pin_id=%d", __func__, __LINE__, pin_id);
|
|
pio = pin_to_controller(info, pin_to_bank(pin_id));
|
|
|
|
if (!pio)
|
|
return -EINVAL;
|
|
|
|
pin = pin_id % MAX_NB_GPIO_PER_BANK;
|
|
|
|
if (at91_mux_get_multidrive(pio, pin))
|
|
*config |= MULTI_DRIVE;
|
|
|
|
if (at91_mux_get_pullup(pio, pin))
|
|
*config |= PULL_UP;
|
|
|
|
if (info->ops->get_deglitch && info->ops->get_deglitch(pio, pin))
|
|
*config |= DEGLITCH;
|
|
if (info->ops->get_debounce && info->ops->get_debounce(pio, pin, &div))
|
|
*config |= DEBOUNCE | (div << DEBOUNCE_VAL_SHIFT);
|
|
if (info->ops->get_pulldown && info->ops->get_pulldown(pio, pin))
|
|
*config |= PULL_DOWN;
|
|
if (info->ops->get_schmitt_trig && info->ops->get_schmitt_trig(pio, pin))
|
|
*config |= DIS_SCHMIT;
|
|
if (info->ops->get_drivestrength)
|
|
*config |= (info->ops->get_drivestrength(pio, pin)
|
|
<< DRIVE_STRENGTH_SHIFT);
|
|
if (info->ops->get_slewrate)
|
|
*config |= (info->ops->get_slewrate(pio, pin) << SLEWRATE_SHIFT);
|
|
if (at91_mux_get_output(pio, pin, &out))
|
|
*config |= OUTPUT | (out << OUTPUT_VAL_SHIFT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_pinconf_set(struct pinctrl_dev *pctldev,
|
|
unsigned pin_id, unsigned long *configs,
|
|
unsigned num_configs)
|
|
{
|
|
struct at91_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
|
|
unsigned mask;
|
|
void __iomem *pio;
|
|
int i;
|
|
unsigned long config;
|
|
unsigned pin;
|
|
|
|
for (i = 0; i < num_configs; i++) {
|
|
config = configs[i];
|
|
|
|
dev_dbg(info->dev,
|
|
"%s:%d, pin_id=%d, config=0x%lx",
|
|
__func__, __LINE__, pin_id, config);
|
|
pio = pin_to_controller(info, pin_to_bank(pin_id));
|
|
|
|
if (!pio)
|
|
return -EINVAL;
|
|
|
|
pin = pin_id % MAX_NB_GPIO_PER_BANK;
|
|
mask = pin_to_mask(pin);
|
|
|
|
if (config & PULL_UP && config & PULL_DOWN)
|
|
return -EINVAL;
|
|
|
|
at91_mux_set_output(pio, mask, config & OUTPUT,
|
|
(config & OUTPUT_VAL) >> OUTPUT_VAL_SHIFT);
|
|
at91_mux_set_pullup(pio, mask, config & PULL_UP);
|
|
at91_mux_set_multidrive(pio, mask, config & MULTI_DRIVE);
|
|
if (info->ops->set_deglitch)
|
|
info->ops->set_deglitch(pio, mask, config & DEGLITCH);
|
|
if (info->ops->set_debounce)
|
|
info->ops->set_debounce(pio, mask, config & DEBOUNCE,
|
|
(config & DEBOUNCE_VAL) >> DEBOUNCE_VAL_SHIFT);
|
|
if (info->ops->set_pulldown)
|
|
info->ops->set_pulldown(pio, mask, config & PULL_DOWN);
|
|
if (info->ops->disable_schmitt_trig && config & DIS_SCHMIT)
|
|
info->ops->disable_schmitt_trig(pio, mask);
|
|
if (info->ops->set_drivestrength)
|
|
info->ops->set_drivestrength(pio, pin,
|
|
(config & DRIVE_STRENGTH)
|
|
>> DRIVE_STRENGTH_SHIFT);
|
|
if (info->ops->set_slewrate)
|
|
info->ops->set_slewrate(pio, pin,
|
|
(config & SLEWRATE) >> SLEWRATE_SHIFT);
|
|
|
|
} /* for each config */
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define DBG_SHOW_FLAG(flag) do { \
|
|
if (config & flag) { \
|
|
if (num_conf) \
|
|
seq_puts(s, "|"); \
|
|
seq_puts(s, #flag); \
|
|
num_conf++; \
|
|
} \
|
|
} while (0)
|
|
|
|
#define DBG_SHOW_FLAG_MASKED(mask, flag, name) do { \
|
|
if ((config & mask) == flag) { \
|
|
if (num_conf) \
|
|
seq_puts(s, "|"); \
|
|
seq_puts(s, #name); \
|
|
num_conf++; \
|
|
} \
|
|
} while (0)
|
|
|
|
static void at91_pinconf_dbg_show(struct pinctrl_dev *pctldev,
|
|
struct seq_file *s, unsigned pin_id)
|
|
{
|
|
unsigned long config;
|
|
int val, num_conf = 0;
|
|
|
|
at91_pinconf_get(pctldev, pin_id, &config);
|
|
|
|
DBG_SHOW_FLAG(MULTI_DRIVE);
|
|
DBG_SHOW_FLAG(PULL_UP);
|
|
DBG_SHOW_FLAG(PULL_DOWN);
|
|
DBG_SHOW_FLAG(DIS_SCHMIT);
|
|
DBG_SHOW_FLAG(DEGLITCH);
|
|
DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_BIT_MSK(LOW),
|
|
DRIVE_STRENGTH_LOW);
|
|
DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_BIT_MSK(MED),
|
|
DRIVE_STRENGTH_MED);
|
|
DBG_SHOW_FLAG_MASKED(DRIVE_STRENGTH, DRIVE_STRENGTH_BIT_MSK(HI),
|
|
DRIVE_STRENGTH_HI);
|
|
DBG_SHOW_FLAG(SLEWRATE);
|
|
DBG_SHOW_FLAG(DEBOUNCE);
|
|
if (config & DEBOUNCE) {
|
|
val = config >> DEBOUNCE_VAL_SHIFT;
|
|
seq_printf(s, "(%d)", val);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static void at91_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
|
|
struct seq_file *s, unsigned group)
|
|
{
|
|
}
|
|
|
|
static const struct pinconf_ops at91_pinconf_ops = {
|
|
.pin_config_get = at91_pinconf_get,
|
|
.pin_config_set = at91_pinconf_set,
|
|
.pin_config_dbg_show = at91_pinconf_dbg_show,
|
|
.pin_config_group_dbg_show = at91_pinconf_group_dbg_show,
|
|
};
|
|
|
|
static struct pinctrl_desc at91_pinctrl_desc = {
|
|
.pctlops = &at91_pctrl_ops,
|
|
.pmxops = &at91_pmx_ops,
|
|
.confops = &at91_pinconf_ops,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static const char *gpio_compat = "atmel,at91rm9200-gpio";
|
|
|
|
static void at91_pinctrl_child_count(struct at91_pinctrl *info,
|
|
struct device_node *np)
|
|
{
|
|
struct device_node *child;
|
|
|
|
for_each_child_of_node(np, child) {
|
|
if (of_device_is_compatible(child, gpio_compat)) {
|
|
if (of_device_is_available(child))
|
|
info->nactive_banks++;
|
|
} else {
|
|
info->nfunctions++;
|
|
info->ngroups += of_get_child_count(child);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int at91_pinctrl_mux_mask(struct at91_pinctrl *info,
|
|
struct device_node *np)
|
|
{
|
|
int ret = 0;
|
|
int size;
|
|
const __be32 *list;
|
|
|
|
list = of_get_property(np, "atmel,mux-mask", &size);
|
|
if (!list) {
|
|
dev_err(info->dev, "can not read the mux-mask of %d\n", size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
size /= sizeof(*list);
|
|
if (!size || size % gpio_banks) {
|
|
dev_err(info->dev, "wrong mux mask array should be by %d\n", gpio_banks);
|
|
return -EINVAL;
|
|
}
|
|
info->nmux = size / gpio_banks;
|
|
|
|
info->mux_mask = devm_kcalloc(info->dev, size, sizeof(u32),
|
|
GFP_KERNEL);
|
|
if (!info->mux_mask)
|
|
return -ENOMEM;
|
|
|
|
ret = of_property_read_u32_array(np, "atmel,mux-mask",
|
|
info->mux_mask, size);
|
|
if (ret)
|
|
dev_err(info->dev, "can not read the mux-mask of %d\n", size);
|
|
return ret;
|
|
}
|
|
|
|
static int at91_pinctrl_parse_groups(struct device_node *np,
|
|
struct at91_pin_group *grp,
|
|
struct at91_pinctrl *info, u32 index)
|
|
{
|
|
struct at91_pmx_pin *pin;
|
|
int size;
|
|
const __be32 *list;
|
|
int i, j;
|
|
|
|
dev_dbg(info->dev, "group(%d): %pOFn\n", index, np);
|
|
|
|
/* Initialise group */
|
|
grp->name = np->name;
|
|
|
|
/*
|
|
* the binding format is atmel,pins = <bank pin mux CONFIG ...>,
|
|
* do sanity check and calculate pins number
|
|
*/
|
|
list = of_get_property(np, "atmel,pins", &size);
|
|
/* we do not check return since it's safe node passed down */
|
|
size /= sizeof(*list);
|
|
if (!size || size % 4) {
|
|
dev_err(info->dev, "wrong pins number or pins and configs should be by 4\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
grp->npins = size / 4;
|
|
pin = grp->pins_conf = devm_kcalloc(info->dev,
|
|
grp->npins,
|
|
sizeof(struct at91_pmx_pin),
|
|
GFP_KERNEL);
|
|
grp->pins = devm_kcalloc(info->dev, grp->npins, sizeof(unsigned int),
|
|
GFP_KERNEL);
|
|
if (!grp->pins_conf || !grp->pins)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0, j = 0; i < size; i += 4, j++) {
|
|
pin->bank = be32_to_cpu(*list++);
|
|
pin->pin = be32_to_cpu(*list++);
|
|
grp->pins[j] = pin->bank * MAX_NB_GPIO_PER_BANK + pin->pin;
|
|
pin->mux = be32_to_cpu(*list++);
|
|
pin->conf = be32_to_cpu(*list++);
|
|
|
|
at91_pin_dbg(info->dev, pin);
|
|
pin++;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_pinctrl_parse_functions(struct device_node *np,
|
|
struct at91_pinctrl *info, u32 index)
|
|
{
|
|
struct device_node *child;
|
|
struct at91_pmx_func *func;
|
|
struct at91_pin_group *grp;
|
|
int ret;
|
|
static u32 grp_index;
|
|
u32 i = 0;
|
|
|
|
dev_dbg(info->dev, "parse function(%d): %pOFn\n", index, np);
|
|
|
|
func = &info->functions[index];
|
|
|
|
/* Initialise function */
|
|
func->name = np->name;
|
|
func->ngroups = of_get_child_count(np);
|
|
if (func->ngroups == 0) {
|
|
dev_err(info->dev, "no groups defined\n");
|
|
return -EINVAL;
|
|
}
|
|
func->groups = devm_kcalloc(info->dev,
|
|
func->ngroups, sizeof(char *), GFP_KERNEL);
|
|
if (!func->groups)
|
|
return -ENOMEM;
|
|
|
|
for_each_child_of_node(np, child) {
|
|
func->groups[i] = child->name;
|
|
grp = &info->groups[grp_index++];
|
|
ret = at91_pinctrl_parse_groups(child, grp, info, i++);
|
|
if (ret) {
|
|
of_node_put(child);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id at91_pinctrl_of_match[] = {
|
|
{ .compatible = "atmel,sama5d3-pinctrl", .data = &sama5d3_ops },
|
|
{ .compatible = "atmel,at91sam9x5-pinctrl", .data = &at91sam9x5_ops },
|
|
{ .compatible = "atmel,at91rm9200-pinctrl", .data = &at91rm9200_ops },
|
|
{ .compatible = "microchip,sam9x60-pinctrl", .data = &sam9x60_ops },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static int at91_pinctrl_probe_dt(struct platform_device *pdev,
|
|
struct at91_pinctrl *info)
|
|
{
|
|
int ret = 0;
|
|
int i, j;
|
|
uint32_t *tmp;
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct device_node *child;
|
|
|
|
if (!np)
|
|
return -ENODEV;
|
|
|
|
info->dev = &pdev->dev;
|
|
info->ops = (struct at91_pinctrl_mux_ops *)
|
|
of_match_device(at91_pinctrl_of_match, &pdev->dev)->data;
|
|
at91_pinctrl_child_count(info, np);
|
|
|
|
if (gpio_banks < 1) {
|
|
dev_err(&pdev->dev, "you need to specify at least one gpio-controller\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = at91_pinctrl_mux_mask(info, np);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_dbg(&pdev->dev, "nmux = %d\n", info->nmux);
|
|
|
|
dev_dbg(&pdev->dev, "mux-mask\n");
|
|
tmp = info->mux_mask;
|
|
for (i = 0; i < gpio_banks; i++) {
|
|
for (j = 0; j < info->nmux; j++, tmp++) {
|
|
dev_dbg(&pdev->dev, "%d:%d\t0x%x\n", i, j, tmp[0]);
|
|
}
|
|
}
|
|
|
|
dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions);
|
|
dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups);
|
|
info->functions = devm_kcalloc(&pdev->dev,
|
|
info->nfunctions,
|
|
sizeof(struct at91_pmx_func),
|
|
GFP_KERNEL);
|
|
if (!info->functions)
|
|
return -ENOMEM;
|
|
|
|
info->groups = devm_kcalloc(&pdev->dev,
|
|
info->ngroups,
|
|
sizeof(struct at91_pin_group),
|
|
GFP_KERNEL);
|
|
if (!info->groups)
|
|
return -ENOMEM;
|
|
|
|
dev_dbg(&pdev->dev, "nbanks = %d\n", gpio_banks);
|
|
dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions);
|
|
dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups);
|
|
|
|
i = 0;
|
|
|
|
for_each_child_of_node(np, child) {
|
|
if (of_device_is_compatible(child, gpio_compat))
|
|
continue;
|
|
ret = at91_pinctrl_parse_functions(child, info, i++);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to parse function\n");
|
|
of_node_put(child);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_pinctrl_probe(struct platform_device *pdev)
|
|
{
|
|
struct at91_pinctrl *info;
|
|
struct pinctrl_pin_desc *pdesc;
|
|
int ret, i, j, k, ngpio_chips_enabled = 0;
|
|
|
|
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
|
|
if (!info)
|
|
return -ENOMEM;
|
|
|
|
ret = at91_pinctrl_probe_dt(pdev, info);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* We need all the GPIO drivers to probe FIRST, or we will not be able
|
|
* to obtain references to the struct gpio_chip * for them, and we
|
|
* need this to proceed.
|
|
*/
|
|
for (i = 0; i < gpio_banks; i++)
|
|
if (gpio_chips[i])
|
|
ngpio_chips_enabled++;
|
|
|
|
if (ngpio_chips_enabled < info->nactive_banks) {
|
|
dev_warn(&pdev->dev,
|
|
"All GPIO chips are not registered yet (%d/%d)\n",
|
|
ngpio_chips_enabled, info->nactive_banks);
|
|
devm_kfree(&pdev->dev, info);
|
|
return -EPROBE_DEFER;
|
|
}
|
|
|
|
at91_pinctrl_desc.name = dev_name(&pdev->dev);
|
|
at91_pinctrl_desc.npins = gpio_banks * MAX_NB_GPIO_PER_BANK;
|
|
at91_pinctrl_desc.pins = pdesc =
|
|
devm_kcalloc(&pdev->dev,
|
|
at91_pinctrl_desc.npins, sizeof(*pdesc),
|
|
GFP_KERNEL);
|
|
|
|
if (!at91_pinctrl_desc.pins)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0, k = 0; i < gpio_banks; i++) {
|
|
for (j = 0; j < MAX_NB_GPIO_PER_BANK; j++, k++) {
|
|
pdesc->number = k;
|
|
pdesc->name = kasprintf(GFP_KERNEL, "pio%c%d", i + 'A', j);
|
|
pdesc++;
|
|
}
|
|
}
|
|
|
|
platform_set_drvdata(pdev, info);
|
|
info->pctl = devm_pinctrl_register(&pdev->dev, &at91_pinctrl_desc,
|
|
info);
|
|
|
|
if (IS_ERR(info->pctl)) {
|
|
dev_err(&pdev->dev, "could not register AT91 pinctrl driver\n");
|
|
return PTR_ERR(info->pctl);
|
|
}
|
|
|
|
/* We will handle a range of GPIO pins */
|
|
for (i = 0; i < gpio_banks; i++)
|
|
if (gpio_chips[i])
|
|
pinctrl_add_gpio_range(info->pctl, &gpio_chips[i]->range);
|
|
|
|
dev_info(&pdev->dev, "initialized AT91 pinctrl driver\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int at91_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct at91_gpio_chip *at91_gpio = gpiochip_get_data(chip);
|
|
void __iomem *pio = at91_gpio->regbase;
|
|
unsigned mask = 1 << offset;
|
|
u32 osr;
|
|
|
|
osr = readl_relaxed(pio + PIO_OSR);
|
|
return !(osr & mask);
|
|
}
|
|
|
|
static int at91_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct at91_gpio_chip *at91_gpio = gpiochip_get_data(chip);
|
|
void __iomem *pio = at91_gpio->regbase;
|
|
unsigned mask = 1 << offset;
|
|
|
|
writel_relaxed(mask, pio + PIO_ODR);
|
|
return 0;
|
|
}
|
|
|
|
static int at91_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
struct at91_gpio_chip *at91_gpio = gpiochip_get_data(chip);
|
|
void __iomem *pio = at91_gpio->regbase;
|
|
unsigned mask = 1 << offset;
|
|
u32 pdsr;
|
|
|
|
pdsr = readl_relaxed(pio + PIO_PDSR);
|
|
return (pdsr & mask) != 0;
|
|
}
|
|
|
|
static void at91_gpio_set(struct gpio_chip *chip, unsigned offset,
|
|
int val)
|
|
{
|
|
struct at91_gpio_chip *at91_gpio = gpiochip_get_data(chip);
|
|
void __iomem *pio = at91_gpio->regbase;
|
|
unsigned mask = 1 << offset;
|
|
|
|
writel_relaxed(mask, pio + (val ? PIO_SODR : PIO_CODR));
|
|
}
|
|
|
|
static void at91_gpio_set_multiple(struct gpio_chip *chip,
|
|
unsigned long *mask, unsigned long *bits)
|
|
{
|
|
struct at91_gpio_chip *at91_gpio = gpiochip_get_data(chip);
|
|
void __iomem *pio = at91_gpio->regbase;
|
|
|
|
#define BITS_MASK(bits) (((bits) == 32) ? ~0U : (BIT(bits) - 1))
|
|
/* Mask additionally to ngpio as not all GPIO controllers have 32 pins */
|
|
uint32_t set_mask = (*mask & *bits) & BITS_MASK(chip->ngpio);
|
|
uint32_t clear_mask = (*mask & ~(*bits)) & BITS_MASK(chip->ngpio);
|
|
|
|
writel_relaxed(set_mask, pio + PIO_SODR);
|
|
writel_relaxed(clear_mask, pio + PIO_CODR);
|
|
}
|
|
|
|
static int at91_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
|
|
int val)
|
|
{
|
|
struct at91_gpio_chip *at91_gpio = gpiochip_get_data(chip);
|
|
void __iomem *pio = at91_gpio->regbase;
|
|
unsigned mask = 1 << offset;
|
|
|
|
writel_relaxed(mask, pio + (val ? PIO_SODR : PIO_CODR));
|
|
writel_relaxed(mask, pio + PIO_OER);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
static void at91_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
|
|
{
|
|
enum at91_mux mode;
|
|
int i;
|
|
struct at91_gpio_chip *at91_gpio = gpiochip_get_data(chip);
|
|
void __iomem *pio = at91_gpio->regbase;
|
|
|
|
for (i = 0; i < chip->ngpio; i++) {
|
|
unsigned mask = pin_to_mask(i);
|
|
const char *gpio_label;
|
|
|
|
gpio_label = gpiochip_is_requested(chip, i);
|
|
if (!gpio_label)
|
|
continue;
|
|
mode = at91_gpio->ops->get_periph(pio, mask);
|
|
seq_printf(s, "[%s] GPIO%s%d: ",
|
|
gpio_label, chip->label, i);
|
|
if (mode == AT91_MUX_GPIO) {
|
|
seq_printf(s, "[gpio] ");
|
|
seq_printf(s, "%s ",
|
|
readl_relaxed(pio + PIO_OSR) & mask ?
|
|
"output" : "input");
|
|
seq_printf(s, "%s\n",
|
|
readl_relaxed(pio + PIO_PDSR) & mask ?
|
|
"set" : "clear");
|
|
} else {
|
|
seq_printf(s, "[periph %c]\n",
|
|
mode + 'A' - 1);
|
|
}
|
|
}
|
|
}
|
|
#else
|
|
#define at91_gpio_dbg_show NULL
|
|
#endif
|
|
|
|
/* Several AIC controller irqs are dispatched through this GPIO handler.
|
|
* To use any AT91_PIN_* as an externally triggered IRQ, first call
|
|
* at91_set_gpio_input() then maybe enable its glitch filter.
|
|
* Then just request_irq() with the pin ID; it works like any ARM IRQ
|
|
* handler.
|
|
* First implementation always triggers on rising and falling edges
|
|
* whereas the newer PIO3 can be additionally configured to trigger on
|
|
* level, edge with any polarity.
|
|
*
|
|
* Alternatively, certain pins may be used directly as IRQ0..IRQ6 after
|
|
* configuring them with at91_set_a_periph() or at91_set_b_periph().
|
|
* IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering.
|
|
*/
|
|
|
|
static void gpio_irq_mask(struct irq_data *d)
|
|
{
|
|
struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
|
|
void __iomem *pio = at91_gpio->regbase;
|
|
unsigned mask = 1 << d->hwirq;
|
|
|
|
if (pio)
|
|
writel_relaxed(mask, pio + PIO_IDR);
|
|
}
|
|
|
|
static void gpio_irq_unmask(struct irq_data *d)
|
|
{
|
|
struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
|
|
void __iomem *pio = at91_gpio->regbase;
|
|
unsigned mask = 1 << d->hwirq;
|
|
|
|
if (pio)
|
|
writel_relaxed(mask, pio + PIO_IER);
|
|
}
|
|
|
|
static int gpio_irq_type(struct irq_data *d, unsigned type)
|
|
{
|
|
switch (type) {
|
|
case IRQ_TYPE_NONE:
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
return 0;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
/* Alternate irq type for PIO3 support */
|
|
static int alt_gpio_irq_type(struct irq_data *d, unsigned type)
|
|
{
|
|
struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
|
|
void __iomem *pio = at91_gpio->regbase;
|
|
unsigned mask = 1 << d->hwirq;
|
|
|
|
switch (type) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
irq_set_handler_locked(d, handle_simple_irq);
|
|
writel_relaxed(mask, pio + PIO_ESR);
|
|
writel_relaxed(mask, pio + PIO_REHLSR);
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
irq_set_handler_locked(d, handle_simple_irq);
|
|
writel_relaxed(mask, pio + PIO_ESR);
|
|
writel_relaxed(mask, pio + PIO_FELLSR);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
irq_set_handler_locked(d, handle_level_irq);
|
|
writel_relaxed(mask, pio + PIO_LSR);
|
|
writel_relaxed(mask, pio + PIO_FELLSR);
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
irq_set_handler_locked(d, handle_level_irq);
|
|
writel_relaxed(mask, pio + PIO_LSR);
|
|
writel_relaxed(mask, pio + PIO_REHLSR);
|
|
break;
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
/*
|
|
* disable additional interrupt modes:
|
|
* fall back to default behavior
|
|
*/
|
|
irq_set_handler_locked(d, handle_simple_irq);
|
|
writel_relaxed(mask, pio + PIO_AIMDR);
|
|
return 0;
|
|
case IRQ_TYPE_NONE:
|
|
default:
|
|
pr_warn("AT91: No type for GPIO irq offset %d\n", d->irq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* enable additional interrupt modes */
|
|
writel_relaxed(mask, pio + PIO_AIMER);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void gpio_irq_ack(struct irq_data *d)
|
|
{
|
|
/* the interrupt is already cleared before by reading ISR */
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static u32 wakeups[MAX_GPIO_BANKS];
|
|
static u32 backups[MAX_GPIO_BANKS];
|
|
|
|
static int gpio_irq_set_wake(struct irq_data *d, unsigned state)
|
|
{
|
|
struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
|
|
unsigned bank = at91_gpio->pioc_idx;
|
|
unsigned mask = 1 << d->hwirq;
|
|
|
|
if (unlikely(bank >= MAX_GPIO_BANKS))
|
|
return -EINVAL;
|
|
|
|
if (state)
|
|
wakeups[bank] |= mask;
|
|
else
|
|
wakeups[bank] &= ~mask;
|
|
|
|
irq_set_irq_wake(at91_gpio->pioc_virq, state);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void at91_pinctrl_gpio_suspend(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < gpio_banks; i++) {
|
|
void __iomem *pio;
|
|
|
|
if (!gpio_chips[i])
|
|
continue;
|
|
|
|
pio = gpio_chips[i]->regbase;
|
|
|
|
backups[i] = readl_relaxed(pio + PIO_IMR);
|
|
writel_relaxed(backups[i], pio + PIO_IDR);
|
|
writel_relaxed(wakeups[i], pio + PIO_IER);
|
|
|
|
if (!wakeups[i])
|
|
clk_disable_unprepare(gpio_chips[i]->clock);
|
|
else
|
|
printk(KERN_DEBUG "GPIO-%c may wake for %08x\n",
|
|
'A'+i, wakeups[i]);
|
|
}
|
|
}
|
|
|
|
void at91_pinctrl_gpio_resume(void)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < gpio_banks; i++) {
|
|
void __iomem *pio;
|
|
|
|
if (!gpio_chips[i])
|
|
continue;
|
|
|
|
pio = gpio_chips[i]->regbase;
|
|
|
|
if (!wakeups[i])
|
|
clk_prepare_enable(gpio_chips[i]->clock);
|
|
|
|
writel_relaxed(wakeups[i], pio + PIO_IDR);
|
|
writel_relaxed(backups[i], pio + PIO_IER);
|
|
}
|
|
}
|
|
|
|
#else
|
|
#define gpio_irq_set_wake NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
static void gpio_irq_handler(struct irq_desc *desc)
|
|
{
|
|
struct irq_chip *chip = irq_desc_get_chip(desc);
|
|
struct gpio_chip *gpio_chip = irq_desc_get_handler_data(desc);
|
|
struct at91_gpio_chip *at91_gpio = gpiochip_get_data(gpio_chip);
|
|
void __iomem *pio = at91_gpio->regbase;
|
|
unsigned long isr;
|
|
int n;
|
|
|
|
chained_irq_enter(chip, desc);
|
|
for (;;) {
|
|
/* Reading ISR acks pending (edge triggered) GPIO interrupts.
|
|
* When there are none pending, we're finished unless we need
|
|
* to process multiple banks (like ID_PIOCDE on sam9263).
|
|
*/
|
|
isr = readl_relaxed(pio + PIO_ISR) & readl_relaxed(pio + PIO_IMR);
|
|
if (!isr) {
|
|
if (!at91_gpio->next)
|
|
break;
|
|
at91_gpio = at91_gpio->next;
|
|
pio = at91_gpio->regbase;
|
|
gpio_chip = &at91_gpio->chip;
|
|
continue;
|
|
}
|
|
|
|
for_each_set_bit(n, &isr, BITS_PER_LONG) {
|
|
generic_handle_irq(irq_find_mapping(
|
|
gpio_chip->irq.domain, n));
|
|
}
|
|
}
|
|
chained_irq_exit(chip, desc);
|
|
/* now it may re-trigger */
|
|
}
|
|
|
|
static int at91_gpio_of_irq_setup(struct platform_device *pdev,
|
|
struct at91_gpio_chip *at91_gpio)
|
|
{
|
|
struct gpio_chip *gpiochip_prev = NULL;
|
|
struct at91_gpio_chip *prev = NULL;
|
|
struct irq_data *d = irq_get_irq_data(at91_gpio->pioc_virq);
|
|
struct irq_chip *gpio_irqchip;
|
|
int ret, i;
|
|
|
|
gpio_irqchip = devm_kzalloc(&pdev->dev, sizeof(*gpio_irqchip), GFP_KERNEL);
|
|
if (!gpio_irqchip)
|
|
return -ENOMEM;
|
|
|
|
at91_gpio->pioc_hwirq = irqd_to_hwirq(d);
|
|
|
|
gpio_irqchip->name = "GPIO";
|
|
gpio_irqchip->irq_ack = gpio_irq_ack;
|
|
gpio_irqchip->irq_disable = gpio_irq_mask;
|
|
gpio_irqchip->irq_mask = gpio_irq_mask;
|
|
gpio_irqchip->irq_unmask = gpio_irq_unmask;
|
|
gpio_irqchip->irq_set_wake = gpio_irq_set_wake,
|
|
gpio_irqchip->irq_set_type = at91_gpio->ops->irq_type;
|
|
|
|
/* Disable irqs of this PIO controller */
|
|
writel_relaxed(~0, at91_gpio->regbase + PIO_IDR);
|
|
|
|
/*
|
|
* Let the generic code handle this edge IRQ, the the chained
|
|
* handler will perform the actual work of handling the parent
|
|
* interrupt.
|
|
*/
|
|
ret = gpiochip_irqchip_add(&at91_gpio->chip,
|
|
gpio_irqchip,
|
|
0,
|
|
handle_edge_irq,
|
|
IRQ_TYPE_NONE);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "at91_gpio.%d: Couldn't add irqchip to gpiochip.\n",
|
|
at91_gpio->pioc_idx);
|
|
return ret;
|
|
}
|
|
|
|
/* The top level handler handles one bank of GPIOs, except
|
|
* on some SoC it can handle up to three...
|
|
* We only set up the handler for the first of the list.
|
|
*/
|
|
gpiochip_prev = irq_get_handler_data(at91_gpio->pioc_virq);
|
|
if (!gpiochip_prev) {
|
|
/* Then register the chain on the parent IRQ */
|
|
gpiochip_set_chained_irqchip(&at91_gpio->chip,
|
|
gpio_irqchip,
|
|
at91_gpio->pioc_virq,
|
|
gpio_irq_handler);
|
|
return 0;
|
|
}
|
|
|
|
prev = gpiochip_get_data(gpiochip_prev);
|
|
|
|
/* we can only have 2 banks before */
|
|
for (i = 0; i < 2; i++) {
|
|
if (prev->next) {
|
|
prev = prev->next;
|
|
} else {
|
|
prev->next = at91_gpio;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* This structure is replicated for each GPIO block allocated at probe time */
|
|
static const struct gpio_chip at91_gpio_template = {
|
|
.request = gpiochip_generic_request,
|
|
.free = gpiochip_generic_free,
|
|
.get_direction = at91_gpio_get_direction,
|
|
.direction_input = at91_gpio_direction_input,
|
|
.get = at91_gpio_get,
|
|
.direction_output = at91_gpio_direction_output,
|
|
.set = at91_gpio_set,
|
|
.set_multiple = at91_gpio_set_multiple,
|
|
.dbg_show = at91_gpio_dbg_show,
|
|
.can_sleep = false,
|
|
.ngpio = MAX_NB_GPIO_PER_BANK,
|
|
};
|
|
|
|
static const struct of_device_id at91_gpio_of_match[] = {
|
|
{ .compatible = "atmel,at91sam9x5-gpio", .data = &at91sam9x5_ops, },
|
|
{ .compatible = "atmel,at91rm9200-gpio", .data = &at91rm9200_ops },
|
|
{ .compatible = "microchip,sam9x60-gpio", .data = &sam9x60_ops },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static int at91_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct resource *res;
|
|
struct at91_gpio_chip *at91_chip = NULL;
|
|
struct gpio_chip *chip;
|
|
struct pinctrl_gpio_range *range;
|
|
int ret = 0;
|
|
int irq, i;
|
|
int alias_idx = of_alias_get_id(np, "gpio");
|
|
uint32_t ngpio;
|
|
char **names;
|
|
|
|
BUG_ON(alias_idx >= ARRAY_SIZE(gpio_chips));
|
|
if (gpio_chips[alias_idx]) {
|
|
ret = -EBUSY;
|
|
goto err;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
ret = irq;
|
|
goto err;
|
|
}
|
|
|
|
at91_chip = devm_kzalloc(&pdev->dev, sizeof(*at91_chip), GFP_KERNEL);
|
|
if (!at91_chip) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
at91_chip->regbase = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(at91_chip->regbase)) {
|
|
ret = PTR_ERR(at91_chip->regbase);
|
|
goto err;
|
|
}
|
|
|
|
at91_chip->ops = (struct at91_pinctrl_mux_ops *)
|
|
of_match_device(at91_gpio_of_match, &pdev->dev)->data;
|
|
at91_chip->pioc_virq = irq;
|
|
at91_chip->pioc_idx = alias_idx;
|
|
|
|
at91_chip->clock = devm_clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(at91_chip->clock)) {
|
|
dev_err(&pdev->dev, "failed to get clock, ignoring.\n");
|
|
ret = PTR_ERR(at91_chip->clock);
|
|
goto err;
|
|
}
|
|
|
|
ret = clk_prepare_enable(at91_chip->clock);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to prepare and enable clock, ignoring.\n");
|
|
goto clk_enable_err;
|
|
}
|
|
|
|
at91_chip->chip = at91_gpio_template;
|
|
|
|
chip = &at91_chip->chip;
|
|
chip->of_node = np;
|
|
chip->label = dev_name(&pdev->dev);
|
|
chip->parent = &pdev->dev;
|
|
chip->owner = THIS_MODULE;
|
|
chip->base = alias_idx * MAX_NB_GPIO_PER_BANK;
|
|
|
|
if (!of_property_read_u32(np, "#gpio-lines", &ngpio)) {
|
|
if (ngpio >= MAX_NB_GPIO_PER_BANK)
|
|
pr_err("at91_gpio.%d, gpio-nb >= %d failback to %d\n",
|
|
alias_idx, MAX_NB_GPIO_PER_BANK, MAX_NB_GPIO_PER_BANK);
|
|
else
|
|
chip->ngpio = ngpio;
|
|
}
|
|
|
|
names = devm_kcalloc(&pdev->dev, chip->ngpio, sizeof(char *),
|
|
GFP_KERNEL);
|
|
|
|
if (!names) {
|
|
ret = -ENOMEM;
|
|
goto clk_enable_err;
|
|
}
|
|
|
|
for (i = 0; i < chip->ngpio; i++)
|
|
names[i] = kasprintf(GFP_KERNEL, "pio%c%d", alias_idx + 'A', i);
|
|
|
|
chip->names = (const char *const *)names;
|
|
|
|
range = &at91_chip->range;
|
|
range->name = chip->label;
|
|
range->id = alias_idx;
|
|
range->pin_base = range->base = range->id * MAX_NB_GPIO_PER_BANK;
|
|
|
|
range->npins = chip->ngpio;
|
|
range->gc = chip;
|
|
|
|
ret = gpiochip_add_data(chip, at91_chip);
|
|
if (ret)
|
|
goto gpiochip_add_err;
|
|
|
|
gpio_chips[alias_idx] = at91_chip;
|
|
gpio_banks = max(gpio_banks, alias_idx + 1);
|
|
|
|
ret = at91_gpio_of_irq_setup(pdev, at91_chip);
|
|
if (ret)
|
|
goto irq_setup_err;
|
|
|
|
dev_info(&pdev->dev, "at address %p\n", at91_chip->regbase);
|
|
|
|
return 0;
|
|
|
|
irq_setup_err:
|
|
gpiochip_remove(chip);
|
|
gpiochip_add_err:
|
|
clk_enable_err:
|
|
clk_disable_unprepare(at91_chip->clock);
|
|
err:
|
|
dev_err(&pdev->dev, "Failure %i for GPIO %i\n", ret, alias_idx);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver at91_gpio_driver = {
|
|
.driver = {
|
|
.name = "gpio-at91",
|
|
.of_match_table = at91_gpio_of_match,
|
|
},
|
|
.probe = at91_gpio_probe,
|
|
};
|
|
|
|
static struct platform_driver at91_pinctrl_driver = {
|
|
.driver = {
|
|
.name = "pinctrl-at91",
|
|
.of_match_table = at91_pinctrl_of_match,
|
|
},
|
|
.probe = at91_pinctrl_probe,
|
|
};
|
|
|
|
static struct platform_driver * const drivers[] = {
|
|
&at91_gpio_driver,
|
|
&at91_pinctrl_driver,
|
|
};
|
|
|
|
static int __init at91_pinctrl_init(void)
|
|
{
|
|
return platform_register_drivers(drivers, ARRAY_SIZE(drivers));
|
|
}
|
|
arch_initcall(at91_pinctrl_init);
|