mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 19:25:27 +07:00
8b99dc0922
This patch adds the gpio-ranges property to almost all of the Qualcomm ARM platforms that utilize the pinctrl-msm framework. The gpio-ranges property is part of the gpiolib subsystem. As a result, the binding text is available in section "2.1 gpio- and pin-controller interaction" of Documentation/devicetree/bindings/gpio/gpio.txt For more information please see the patch titled: "pinctrl: msm: fix gpio-hog related boot issues" from this series. Reported-by: Sven Eckelmann <sven.eckelmann@openmesh.com> Tested-by: Sven Eckelmann <sven.eckelmann@openmesh.com> [ipq4019] Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Tested-by: Robert Marko <robert.marko@sartura.hr> [ipq4019] Cc: Luka Perkov <luka.perkov@sartura.hr> Signed-off-by: Robert Marko <robert.marko@sartura.hr> Link: https://lore.kernel.org/r/20200108125455.308969-1-robert.marko@sartura.hr Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
1633 lines
35 KiB
Plaintext
1633 lines
35 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/dts-v1/;
|
|
|
|
#include <dt-bindings/interconnect/qcom,msm8974.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
#include <dt-bindings/clock/qcom,gcc-msm8974.h>
|
|
#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
|
|
#include <dt-bindings/clock/qcom,rpmcc.h>
|
|
#include <dt-bindings/reset/qcom,gcc-msm8974.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
model = "Qualcomm MSM8974";
|
|
compatible = "qcom,msm8974";
|
|
interrupt-parent = <&intc>;
|
|
|
|
reserved-memory {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
mpss_region: mpss@8000000 {
|
|
reg = <0x08000000 0x5100000>;
|
|
no-map;
|
|
};
|
|
|
|
mba_region: mba@d100000 {
|
|
reg = <0x0d100000 0x100000>;
|
|
no-map;
|
|
};
|
|
|
|
wcnss_region: wcnss@d200000 {
|
|
reg = <0x0d200000 0xa00000>;
|
|
no-map;
|
|
};
|
|
|
|
adsp_region: adsp@dc00000 {
|
|
reg = <0x0dc00000 0x1900000>;
|
|
no-map;
|
|
};
|
|
|
|
venus@f500000 {
|
|
reg = <0x0f500000 0x500000>;
|
|
no-map;
|
|
};
|
|
|
|
smem_region: smem@fa00000 {
|
|
reg = <0xfa00000 0x200000>;
|
|
no-map;
|
|
};
|
|
|
|
tz@fc00000 {
|
|
reg = <0x0fc00000 0x160000>;
|
|
no-map;
|
|
};
|
|
|
|
rfsa@fd60000 {
|
|
reg = <0x0fd60000 0x20000>;
|
|
no-map;
|
|
};
|
|
|
|
rmtfs@fd80000 {
|
|
compatible = "qcom,rmtfs-mem";
|
|
reg = <0x0fd80000 0x180000>;
|
|
no-map;
|
|
|
|
qcom,client-id = <1>;
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_PPI 9 0xf04>;
|
|
|
|
CPU0: cpu@0 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v2";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc0>;
|
|
qcom,saw = <&saw0>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
CPU1: cpu@1 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v2";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc1>;
|
|
qcom,saw = <&saw1>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
CPU2: cpu@2 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v2";
|
|
device_type = "cpu";
|
|
reg = <2>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc2>;
|
|
qcom,saw = <&saw2>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
CPU3: cpu@3 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v2";
|
|
device_type = "cpu";
|
|
reg = <3>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc3>;
|
|
qcom,saw = <&saw3>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
L2: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
qcom,saw = <&saw_l2>;
|
|
};
|
|
|
|
idle-states {
|
|
CPU_SPC: spc {
|
|
compatible = "qcom,idle-state-spc",
|
|
"arm,idle-state";
|
|
entry-latency-us = <150>;
|
|
exit-latency-us = <200>;
|
|
min-residency-us = <2000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x0 0x0>;
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu-thermal0 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 5>;
|
|
|
|
trips {
|
|
cpu_alert0: trip0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit0: trip1 {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-thermal1 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 6>;
|
|
|
|
trips {
|
|
cpu_alert1: trip0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit1: trip1 {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-thermal2 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 7>;
|
|
|
|
trips {
|
|
cpu_alert2: trip0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit2: trip1 {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-thermal3 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 8>;
|
|
|
|
trips {
|
|
cpu_alert3: trip0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit3: trip1 {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
q6-dsp-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 1>;
|
|
|
|
trips {
|
|
q6_dsp_alert0: trip-point0 {
|
|
temperature = <90000>;
|
|
hysteresis = <2000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
};
|
|
|
|
modemtx-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 2>;
|
|
|
|
trips {
|
|
modemtx_alert0: trip-point0 {
|
|
temperature = <90000>;
|
|
hysteresis = <2000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
};
|
|
|
|
video-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 3>;
|
|
|
|
trips {
|
|
video_alert0: trip-point0 {
|
|
temperature = <95000>;
|
|
hysteresis = <2000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
};
|
|
|
|
wlan-thermal {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 4>;
|
|
|
|
trips {
|
|
wlan_alert0: trip-point0 {
|
|
temperature = <105000>;
|
|
hysteresis = <2000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
};
|
|
|
|
gpu-thermal-top {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 9>;
|
|
|
|
trips {
|
|
gpu1_alert0: trip-point0 {
|
|
temperature = <90000>;
|
|
hysteresis = <2000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
};
|
|
|
|
gpu-thermal-bottom {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&tsens 10>;
|
|
|
|
trips {
|
|
gpu2_alert0: trip-point0 {
|
|
temperature = <90000>;
|
|
hysteresis = <2000>;
|
|
type = "hot";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-pmu {
|
|
compatible = "qcom,krait-pmu";
|
|
interrupts = <GIC_PPI 7 0xf04>;
|
|
};
|
|
|
|
clocks {
|
|
xo_board: xo_board {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
sleep_clk: sleep_clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
};
|
|
};
|
|
|
|
timer {
|
|
compatible = "arm,armv7-timer";
|
|
interrupts = <GIC_PPI 2 0xf08>,
|
|
<GIC_PPI 3 0xf08>,
|
|
<GIC_PPI 4 0xf08>,
|
|
<GIC_PPI 1 0xf08>;
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
adsp-pil {
|
|
compatible = "qcom,msm8974-adsp-pil";
|
|
|
|
interrupts-extended = <&intc GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
|
|
<&adsp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
|
|
<&adsp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
|
|
<&adsp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
|
|
<&adsp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
|
|
|
|
cx-supply = <&pm8841_s2>;
|
|
|
|
clocks = <&xo_board>;
|
|
clock-names = "xo";
|
|
|
|
memory-region = <&adsp_region>;
|
|
|
|
qcom,smem-states = <&adsp_smp2p_out 0>;
|
|
qcom,smem-state-names = "stop";
|
|
|
|
smd-edge {
|
|
interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&apcs 8 8>;
|
|
qcom,smd-edge = <1>;
|
|
|
|
label = "lpass";
|
|
};
|
|
};
|
|
|
|
smem {
|
|
compatible = "qcom,smem";
|
|
|
|
memory-region = <&smem_region>;
|
|
qcom,rpm-msg-ram = <&rpm_msg_ram>;
|
|
|
|
hwlocks = <&tcsr_mutex 3>;
|
|
};
|
|
|
|
smp2p-adsp {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <443>, <429>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&apcs 8 10>;
|
|
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <2>;
|
|
|
|
adsp_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
adsp_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
smp2p-modem {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <435>, <428>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&apcs 8 14>;
|
|
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <1>;
|
|
|
|
modem_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
modem_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
smp2p-wcnss {
|
|
compatible = "qcom,smp2p";
|
|
qcom,smem = <451>, <431>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&apcs 8 18>;
|
|
|
|
qcom,local-pid = <0>;
|
|
qcom,remote-pid = <4>;
|
|
|
|
wcnss_smp2p_out: master-kernel {
|
|
qcom,entry-name = "master-kernel";
|
|
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
wcnss_smp2p_in: slave-kernel {
|
|
qcom,entry-name = "slave-kernel";
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
smsm {
|
|
compatible = "qcom,smsm";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
qcom,ipc-1 = <&apcs 8 13>;
|
|
qcom,ipc-2 = <&apcs 8 9>;
|
|
qcom,ipc-3 = <&apcs 8 19>;
|
|
|
|
apps_smsm: apps@0 {
|
|
reg = <0>;
|
|
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
modem_smsm: modem@1 {
|
|
reg = <1>;
|
|
interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
adsp_smsm: adsp@2 {
|
|
reg = <2>;
|
|
interrupts = <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
wcnss_smsm: wcnss@7 {
|
|
reg = <7>;
|
|
interrupts = <GIC_SPI 144 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
firmware {
|
|
scm {
|
|
compatible = "qcom,scm";
|
|
clocks = <&gcc GCC_CE1_CLK>, <&gcc GCC_CE1_AXI_CLK>, <&gcc GCC_CE1_AHB_CLK>;
|
|
clock-names = "core", "bus", "iface";
|
|
};
|
|
};
|
|
|
|
soc: soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "simple-bus";
|
|
|
|
intc: interrupt-controller@f9000000 {
|
|
compatible = "qcom,msm-qgic2";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = <0xf9000000 0x1000>,
|
|
<0xf9002000 0x1000>;
|
|
};
|
|
|
|
apcs: syscon@f9011000 {
|
|
compatible = "syscon";
|
|
reg = <0xf9011000 0x1000>;
|
|
};
|
|
|
|
qfprom: qfprom@fc4bc000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "qcom,qfprom";
|
|
reg = <0xfc4bc000 0x1000>;
|
|
tsens_calib: calib@d0 {
|
|
reg = <0xd0 0x18>;
|
|
};
|
|
tsens_backup: backup@440 {
|
|
reg = <0x440 0x10>;
|
|
};
|
|
};
|
|
|
|
tsens: thermal-sensor@fc4a9000 {
|
|
compatible = "qcom,msm8974-tsens";
|
|
reg = <0xfc4a9000 0x1000>, /* TM */
|
|
<0xfc4a8000 0x1000>; /* SROT */
|
|
nvmem-cells = <&tsens_calib>, <&tsens_backup>;
|
|
nvmem-cell-names = "calib", "calib_backup";
|
|
#qcom,sensors = <11>;
|
|
interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "uplow";
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
|
|
timer@f9020000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "arm,armv7-timer-mem";
|
|
reg = <0xf9020000 0x1000>;
|
|
clock-frequency = <19200000>;
|
|
|
|
frame@f9021000 {
|
|
frame-number = <0>;
|
|
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0xf9021000 0x1000>,
|
|
<0xf9022000 0x1000>;
|
|
};
|
|
|
|
frame@f9023000 {
|
|
frame-number = <1>;
|
|
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0xf9023000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@f9024000 {
|
|
frame-number = <2>;
|
|
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0xf9024000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@f9025000 {
|
|
frame-number = <3>;
|
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0xf9025000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@f9026000 {
|
|
frame-number = <4>;
|
|
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0xf9026000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@f9027000 {
|
|
frame-number = <5>;
|
|
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0xf9027000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
frame@f9028000 {
|
|
frame-number = <6>;
|
|
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
|
|
reg = <0xf9028000 0x1000>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
saw0: power-controller@f9089000 {
|
|
compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
|
|
reg = <0xf9089000 0x1000>, <0xf9009000 0x1000>;
|
|
};
|
|
|
|
saw1: power-controller@f9099000 {
|
|
compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
|
|
reg = <0xf9099000 0x1000>, <0xf9009000 0x1000>;
|
|
};
|
|
|
|
saw2: power-controller@f90a9000 {
|
|
compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
|
|
reg = <0xf90a9000 0x1000>, <0xf9009000 0x1000>;
|
|
};
|
|
|
|
saw3: power-controller@f90b9000 {
|
|
compatible = "qcom,msm8974-saw2-v2.1-cpu", "qcom,saw2";
|
|
reg = <0xf90b9000 0x1000>, <0xf9009000 0x1000>;
|
|
};
|
|
|
|
saw_l2: power-controller@f9012000 {
|
|
compatible = "qcom,saw2";
|
|
reg = <0xf9012000 0x1000>;
|
|
regulator;
|
|
};
|
|
|
|
acc0: clock-controller@f9088000 {
|
|
compatible = "qcom,kpss-acc-v2";
|
|
reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
|
|
};
|
|
|
|
acc1: clock-controller@f9098000 {
|
|
compatible = "qcom,kpss-acc-v2";
|
|
reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
|
|
};
|
|
|
|
acc2: clock-controller@f90a8000 {
|
|
compatible = "qcom,kpss-acc-v2";
|
|
reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
|
|
};
|
|
|
|
acc3: clock-controller@f90b8000 {
|
|
compatible = "qcom,kpss-acc-v2";
|
|
reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
|
|
};
|
|
|
|
restart@fc4ab000 {
|
|
compatible = "qcom,pshold";
|
|
reg = <0xfc4ab000 0x4>;
|
|
};
|
|
|
|
gcc: clock-controller@fc400000 {
|
|
compatible = "qcom,gcc-msm8974";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
#power-domain-cells = <1>;
|
|
reg = <0xfc400000 0x4000>;
|
|
};
|
|
|
|
tcsr: syscon@fd4a0000 {
|
|
compatible = "syscon";
|
|
reg = <0xfd4a0000 0x10000>;
|
|
};
|
|
|
|
tcsr_mutex_block: syscon@fd484000 {
|
|
compatible = "syscon";
|
|
reg = <0xfd484000 0x2000>;
|
|
};
|
|
|
|
mmcc: clock-controller@fd8c0000 {
|
|
compatible = "qcom,mmcc-msm8974";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
#power-domain-cells = <1>;
|
|
reg = <0xfd8c0000 0x6000>;
|
|
};
|
|
|
|
tcsr_mutex: tcsr-mutex {
|
|
compatible = "qcom,tcsr-mutex";
|
|
syscon = <&tcsr_mutex_block 0 0x80>;
|
|
|
|
#hwlock-cells = <1>;
|
|
};
|
|
|
|
rpm_msg_ram: memory@fc428000 {
|
|
compatible = "qcom,rpm-msg-ram";
|
|
reg = <0xfc428000 0x4000>;
|
|
};
|
|
|
|
blsp1_uart1: serial@f991d000 {
|
|
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
|
reg = <0xf991d000 0x1000>;
|
|
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
blsp1_uart2: serial@f991e000 {
|
|
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
|
reg = <0xf991e000 0x1000>;
|
|
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
blsp2_uart10: serial@f9960000 {
|
|
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
|
|
reg = <0xf9960000 0x1000>;
|
|
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP2_UART4_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@f9824900 {
|
|
compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
|
|
reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
|
|
reg-names = "hc_mem", "core_mem";
|
|
interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "hc_irq", "pwr_irq";
|
|
clocks = <&gcc GCC_SDCC1_APPS_CLK>,
|
|
<&gcc GCC_SDCC1_AHB_CLK>,
|
|
<&xo_board>;
|
|
clock-names = "core", "iface", "xo";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@f9864900 {
|
|
compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
|
|
reg = <0xf9864900 0x11c>, <0xf9864000 0x800>;
|
|
reg-names = "hc_mem", "core_mem";
|
|
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "hc_irq", "pwr_irq";
|
|
clocks = <&gcc GCC_SDCC3_APPS_CLK>,
|
|
<&gcc GCC_SDCC3_AHB_CLK>,
|
|
<&xo_board>;
|
|
clock-names = "core", "iface", "xo";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdhci@f98a4900 {
|
|
compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
|
|
reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
|
|
reg-names = "hc_mem", "core_mem";
|
|
interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "hc_irq", "pwr_irq";
|
|
clocks = <&gcc GCC_SDCC2_APPS_CLK>,
|
|
<&gcc GCC_SDCC2_AHB_CLK>,
|
|
<&xo_board>;
|
|
clock-names = "core", "iface", "xo";
|
|
status = "disabled";
|
|
};
|
|
|
|
otg: usb@f9a55000 {
|
|
compatible = "qcom,ci-hdrc";
|
|
reg = <0xf9a55000 0x200>,
|
|
<0xf9a55200 0x200>;
|
|
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_USB_HS_AHB_CLK>,
|
|
<&gcc GCC_USB_HS_SYSTEM_CLK>;
|
|
clock-names = "iface", "core";
|
|
assigned-clocks = <&gcc GCC_USB_HS_SYSTEM_CLK>;
|
|
assigned-clock-rates = <75000000>;
|
|
resets = <&gcc GCC_USB_HS_BCR>;
|
|
reset-names = "core";
|
|
phy_type = "ulpi";
|
|
dr_mode = "otg";
|
|
ahb-burst-config = <0>;
|
|
phy-names = "usb-phy";
|
|
status = "disabled";
|
|
#reset-cells = <1>;
|
|
|
|
ulpi {
|
|
usb_hs1_phy: phy@a {
|
|
compatible = "qcom,usb-hs-phy-msm8974",
|
|
"qcom,usb-hs-phy";
|
|
#phy-cells = <0>;
|
|
clocks = <&xo_board>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>;
|
|
clock-names = "ref", "sleep";
|
|
resets = <&gcc GCC_USB2A_PHY_BCR>, <&otg 0>;
|
|
reset-names = "phy", "por";
|
|
status = "disabled";
|
|
};
|
|
|
|
usb_hs2_phy: phy@b {
|
|
compatible = "qcom,usb-hs-phy-msm8974",
|
|
"qcom,usb-hs-phy";
|
|
#phy-cells = <0>;
|
|
clocks = <&xo_board>, <&gcc GCC_USB2B_PHY_SLEEP_CLK>;
|
|
clock-names = "ref", "sleep";
|
|
resets = <&gcc GCC_USB2B_PHY_BCR>, <&otg 1>;
|
|
reset-names = "phy", "por";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
rng@f9bff000 {
|
|
compatible = "qcom,prng";
|
|
reg = <0xf9bff000 0x200>;
|
|
clocks = <&gcc GCC_PRNG_AHB_CLK>;
|
|
clock-names = "core";
|
|
};
|
|
|
|
remoteproc@fc880000 {
|
|
compatible = "qcom,msm8974-mss-pil";
|
|
reg = <0xfc880000 0x100>, <0xfc820000 0x020>;
|
|
reg-names = "qdsp6", "rmb";
|
|
|
|
interrupts-extended = <&intc GIC_SPI 24 IRQ_TYPE_EDGE_RISING>,
|
|
<&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
|
|
<&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
|
|
<&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
|
|
<&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
|
|
|
|
clocks = <&gcc GCC_MSS_Q6_BIMC_AXI_CLK>,
|
|
<&gcc GCC_MSS_CFG_AHB_CLK>,
|
|
<&gcc GCC_BOOT_ROM_AHB_CLK>,
|
|
<&xo_board>;
|
|
clock-names = "iface", "bus", "mem", "xo";
|
|
|
|
resets = <&gcc GCC_MSS_RESTART>;
|
|
reset-names = "mss_restart";
|
|
|
|
cx-supply = <&pm8841_s2>;
|
|
mss-supply = <&pm8841_s3>;
|
|
mx-supply = <&pm8841_s1>;
|
|
pll-supply = <&pm8941_l12>;
|
|
|
|
qcom,halt-regs = <&tcsr_mutex_block 0x1180 0x1200 0x1280>;
|
|
|
|
qcom,smem-states = <&modem_smp2p_out 0>;
|
|
qcom,smem-state-names = "stop";
|
|
|
|
mba {
|
|
memory-region = <&mba_region>;
|
|
};
|
|
|
|
mpss {
|
|
memory-region = <&mpss_region>;
|
|
};
|
|
|
|
smd-edge {
|
|
interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&apcs 8 12>;
|
|
qcom,smd-edge = <0>;
|
|
|
|
label = "modem";
|
|
};
|
|
};
|
|
|
|
pronto: remoteproc@fb21b000 {
|
|
compatible = "qcom,pronto-v2-pil", "qcom,pronto";
|
|
reg = <0xfb204000 0x2000>, <0xfb202000 0x1000>, <0xfb21b000 0x3000>;
|
|
reg-names = "ccu", "dxe", "pmu";
|
|
|
|
memory-region = <&wcnss_region>;
|
|
|
|
interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
|
|
<&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
|
|
<&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
|
|
<&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
|
|
<&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
|
|
|
|
vddpx-supply = <&pm8941_s3>;
|
|
|
|
qcom,smem-states = <&wcnss_smp2p_out 0>;
|
|
qcom,smem-state-names = "stop";
|
|
|
|
status = "disabled";
|
|
|
|
iris {
|
|
compatible = "qcom,wcn3680";
|
|
|
|
clocks = <&rpmcc RPM_SMD_CXO_A2>;
|
|
clock-names = "xo";
|
|
|
|
vddxo-supply = <&pm8941_l6>;
|
|
vddrfa-supply = <&pm8941_l11>;
|
|
vddpa-supply = <&pm8941_l19>;
|
|
vdddig-supply = <&pm8941_s3>;
|
|
};
|
|
|
|
smd-edge {
|
|
interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&apcs 8 17>;
|
|
qcom,smd-edge = <6>;
|
|
|
|
wcnss {
|
|
compatible = "qcom,wcnss";
|
|
qcom,smd-channels = "WCNSS_CTRL";
|
|
status = "disabled";
|
|
|
|
qcom,mmio = <&pronto>;
|
|
|
|
bt {
|
|
compatible = "qcom,wcnss-bt";
|
|
};
|
|
|
|
wifi {
|
|
compatible = "qcom,wcnss-wlan";
|
|
|
|
interrupts = <GIC_SPI 145 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 146 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "tx", "rx";
|
|
|
|
qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
|
|
qcom,smem-state-names = "tx-enable", "tx-rings-empty";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
msmgpio: pinctrl@fd510000 {
|
|
compatible = "qcom,msm8974-pinctrl";
|
|
reg = <0xfd510000 0x4000>;
|
|
gpio-controller;
|
|
gpio-ranges = <&msmgpio 0 0 146>;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
|
|
};
|
|
|
|
i2c@f9923000 {
|
|
status = "disabled";
|
|
compatible = "qcom,i2c-qup-v2.1.1";
|
|
reg = <0xf9923000 0x1000>;
|
|
interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
i2c@f9924000 {
|
|
status = "disabled";
|
|
compatible = "qcom,i2c-qup-v2.1.1";
|
|
reg = <0xf9924000 0x1000>;
|
|
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
blsp_i2c3: i2c@f9925000 {
|
|
status = "disabled";
|
|
compatible = "qcom,i2c-qup-v2.1.1";
|
|
reg = <0xf9925000 0x1000>;
|
|
interrupts = <0 97 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>, <&gcc GCC_BLSP1_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
blsp_i2c8: i2c@f9964000 {
|
|
status = "disabled";
|
|
compatible = "qcom,i2c-qup-v2.1.1";
|
|
reg = <0xf9964000 0x1000>;
|
|
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
blsp_i2c11: i2c@f9967000 {
|
|
status = "disabled";
|
|
compatible = "qcom,i2c-qup-v2.1.1";
|
|
reg = <0xf9967000 0x1000>;
|
|
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP2_QUP5_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
dmas = <&blsp2_dma 20>, <&blsp2_dma 21>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
blsp_i2c12: i2c@f9968000 {
|
|
status = "disabled";
|
|
compatible = "qcom,i2c-qup-v2.1.1";
|
|
reg = <0xf9968000 0x1000>;
|
|
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP2_QUP6_I2C_APPS_CLK>, <&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
spmi_bus: spmi@fc4cf000 {
|
|
compatible = "qcom,spmi-pmic-arb";
|
|
reg-names = "core", "intr", "cnfg";
|
|
reg = <0xfc4cf000 0x1000>,
|
|
<0xfc4cb000 0x1000>,
|
|
<0xfc4ca000 0x1000>;
|
|
interrupt-names = "periph_irq";
|
|
interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
|
|
qcom,ee = <0>;
|
|
qcom,channel = <0>;
|
|
#address-cells = <2>;
|
|
#size-cells = <0>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <4>;
|
|
};
|
|
|
|
blsp2_dma: dma-controller@f9944000 {
|
|
compatible = "qcom,bam-v1.4.0";
|
|
reg = <0xf9944000 0x19000>;
|
|
interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc GCC_BLSP2_AHB_CLK>;
|
|
clock-names = "bam_clk";
|
|
#dma-cells = <1>;
|
|
qcom,ee = <0>;
|
|
};
|
|
|
|
etr@fc322000 {
|
|
compatible = "arm,coresight-tmc", "arm,primecell";
|
|
reg = <0xfc322000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
in-ports {
|
|
port {
|
|
etr_in: endpoint {
|
|
remote-endpoint = <&replicator_out0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu@fc318000 {
|
|
compatible = "arm,coresight-tpiu", "arm,primecell";
|
|
reg = <0xfc318000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
in-ports {
|
|
port {
|
|
tpiu_in: endpoint {
|
|
remote-endpoint = <&replicator_out1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
replicator@fc31c000 {
|
|
compatible = "arm,coresight-dynamic-replicator", "arm,primecell";
|
|
reg = <0xfc31c000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
out-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
replicator_out0: endpoint {
|
|
remote-endpoint = <&etr_in>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
replicator_out1: endpoint {
|
|
remote-endpoint = <&tpiu_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
in-ports {
|
|
port {
|
|
replicator_in: endpoint {
|
|
remote-endpoint = <&etf_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etf@fc307000 {
|
|
compatible = "arm,coresight-tmc", "arm,primecell";
|
|
reg = <0xfc307000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
out-ports {
|
|
port {
|
|
etf_out: endpoint {
|
|
remote-endpoint = <&replicator_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
in-ports {
|
|
port {
|
|
etf_in: endpoint {
|
|
remote-endpoint = <&merger_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@fc31b000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0xfc31b000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/*
|
|
* Not described input ports:
|
|
* 0 - connected trought funnel to Audio, Modem and
|
|
* Resource and Power Manager CPU's
|
|
* 2...7 - not-connected
|
|
*/
|
|
port@1 {
|
|
reg = <1>;
|
|
merger_in1: endpoint {
|
|
remote-endpoint = <&funnel1_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
merger_out: endpoint {
|
|
remote-endpoint = <&etf_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@fc31a000 {
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0xfc31a000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/*
|
|
* Not described input ports:
|
|
* 0 - not-connected
|
|
* 1 - connected trought funnel to Multimedia CPU
|
|
* 2 - connected to Wireless CPU
|
|
* 3 - not-connected
|
|
* 4 - not-connected
|
|
* 6 - not-connected
|
|
* 7 - connected to STM
|
|
*/
|
|
port@5 {
|
|
reg = <5>;
|
|
funnel1_in5: endpoint {
|
|
remote-endpoint = <&kpss_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
funnel1_out: endpoint {
|
|
remote-endpoint = <&merger_in1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@fc345000 { /* KPSS funnel only 4 inputs are used */
|
|
compatible = "arm,coresight-dynamic-funnel", "arm,primecell";
|
|
reg = <0xfc345000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
in-ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
kpss_in0: endpoint {
|
|
remote-endpoint = <&etm0_out>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
kpss_in1: endpoint {
|
|
remote-endpoint = <&etm1_out>;
|
|
};
|
|
};
|
|
port@2 {
|
|
reg = <2>;
|
|
kpss_in2: endpoint {
|
|
remote-endpoint = <&etm2_out>;
|
|
};
|
|
};
|
|
port@3 {
|
|
reg = <3>;
|
|
kpss_in3: endpoint {
|
|
remote-endpoint = <&etm3_out>;
|
|
};
|
|
};
|
|
};
|
|
|
|
out-ports {
|
|
port {
|
|
kpss_out: endpoint {
|
|
remote-endpoint = <&funnel1_in5>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@fc33c000 {
|
|
compatible = "arm,coresight-etm4x", "arm,primecell";
|
|
reg = <0xfc33c000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
cpu = <&CPU0>;
|
|
|
|
out-ports {
|
|
port {
|
|
etm0_out: endpoint {
|
|
remote-endpoint = <&kpss_in0>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@fc33d000 {
|
|
compatible = "arm,coresight-etm4x", "arm,primecell";
|
|
reg = <0xfc33d000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
cpu = <&CPU1>;
|
|
|
|
out-ports {
|
|
port {
|
|
etm1_out: endpoint {
|
|
remote-endpoint = <&kpss_in1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@fc33e000 {
|
|
compatible = "arm,coresight-etm4x", "arm,primecell";
|
|
reg = <0xfc33e000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
cpu = <&CPU2>;
|
|
|
|
out-ports {
|
|
port {
|
|
etm2_out: endpoint {
|
|
remote-endpoint = <&kpss_in2>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@fc33f000 {
|
|
compatible = "arm,coresight-etm4x", "arm,primecell";
|
|
reg = <0xfc33f000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_SMD_QDSS_CLK>, <&rpmcc RPM_SMD_QDSS_A_CLK>;
|
|
clock-names = "apb_pclk", "atclk";
|
|
|
|
cpu = <&CPU3>;
|
|
|
|
out-ports {
|
|
port {
|
|
etm3_out: endpoint {
|
|
remote-endpoint = <&kpss_in3>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
ocmem@fdd00000 {
|
|
compatible = "qcom,msm8974-ocmem";
|
|
reg = <0xfdd00000 0x2000>,
|
|
<0xfec00000 0x180000>;
|
|
reg-names = "ctrl",
|
|
"mem";
|
|
clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
|
|
<&mmcc OCMEMCX_OCMEMNOC_CLK>;
|
|
clock-names = "core",
|
|
"iface";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
gmu_sram: gmu-sram@0 {
|
|
reg = <0x0 0x100000>;
|
|
};
|
|
};
|
|
|
|
bimc: interconnect@fc380000 {
|
|
reg = <0xfc380000 0x6a000>;
|
|
compatible = "qcom,msm8974-bimc";
|
|
#interconnect-cells = <1>;
|
|
clock-names = "bus", "bus_a";
|
|
clocks = <&rpmcc RPM_SMD_BIMC_CLK>,
|
|
<&rpmcc RPM_SMD_BIMC_A_CLK>;
|
|
};
|
|
|
|
snoc: interconnect@fc460000 {
|
|
reg = <0xfc460000 0x4000>;
|
|
compatible = "qcom,msm8974-snoc";
|
|
#interconnect-cells = <1>;
|
|
clock-names = "bus", "bus_a";
|
|
clocks = <&rpmcc RPM_SMD_SNOC_CLK>,
|
|
<&rpmcc RPM_SMD_SNOC_A_CLK>;
|
|
};
|
|
|
|
pnoc: interconnect@fc468000 {
|
|
reg = <0xfc468000 0x4000>;
|
|
compatible = "qcom,msm8974-pnoc";
|
|
#interconnect-cells = <1>;
|
|
clock-names = "bus", "bus_a";
|
|
clocks = <&rpmcc RPM_SMD_PNOC_CLK>,
|
|
<&rpmcc RPM_SMD_PNOC_A_CLK>;
|
|
};
|
|
|
|
ocmemnoc: interconnect@fc470000 {
|
|
reg = <0xfc470000 0x4000>;
|
|
compatible = "qcom,msm8974-ocmemnoc";
|
|
#interconnect-cells = <1>;
|
|
clock-names = "bus", "bus_a";
|
|
clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
|
|
<&rpmcc RPM_SMD_OCMEMGX_A_CLK>;
|
|
};
|
|
|
|
mmssnoc: interconnect@fc478000 {
|
|
reg = <0xfc478000 0x4000>;
|
|
compatible = "qcom,msm8974-mmssnoc";
|
|
#interconnect-cells = <1>;
|
|
clock-names = "bus", "bus_a";
|
|
clocks = <&mmcc MMSS_S0_AXI_CLK>,
|
|
<&mmcc MMSS_S0_AXI_CLK>;
|
|
};
|
|
|
|
cnoc: interconnect@fc480000 {
|
|
reg = <0xfc480000 0x4000>;
|
|
compatible = "qcom,msm8974-cnoc";
|
|
#interconnect-cells = <1>;
|
|
clock-names = "bus", "bus_a";
|
|
clocks = <&rpmcc RPM_SMD_CNOC_CLK>,
|
|
<&rpmcc RPM_SMD_CNOC_A_CLK>;
|
|
};
|
|
|
|
mdss: mdss@fd900000 {
|
|
status = "disabled";
|
|
|
|
compatible = "qcom,mdss";
|
|
reg = <0xfd900000 0x100>,
|
|
<0xfd924000 0x1000>;
|
|
reg-names = "mdss_phys",
|
|
"vbif_phys";
|
|
|
|
power-domains = <&mmcc MDSS_GDSC>;
|
|
|
|
clocks = <&mmcc MDSS_AHB_CLK>,
|
|
<&mmcc MDSS_AXI_CLK>,
|
|
<&mmcc MDSS_VSYNC_CLK>;
|
|
clock-names = "iface",
|
|
"bus",
|
|
"vsync";
|
|
|
|
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
mdp: mdp@fd900000 {
|
|
status = "disabled";
|
|
|
|
compatible = "qcom,mdp5";
|
|
reg = <0xfd900100 0x22000>;
|
|
reg-names = "mdp_phys";
|
|
|
|
interrupt-parent = <&mdss>;
|
|
interrupts = <0 0>;
|
|
|
|
clocks = <&mmcc MDSS_AHB_CLK>,
|
|
<&mmcc MDSS_AXI_CLK>,
|
|
<&mmcc MDSS_MDP_CLK>,
|
|
<&mmcc MDSS_VSYNC_CLK>;
|
|
clock-names = "iface",
|
|
"bus",
|
|
"core",
|
|
"vsync";
|
|
|
|
interconnects = <&mmssnoc MNOC_MAS_MDP_PORT0 &bimc BIMC_SLV_EBI_CH0>;
|
|
interconnect-names = "mdp0-mem";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
mdp5_intf1_out: endpoint {
|
|
remote-endpoint = <&dsi0_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
dsi0: dsi@fd922800 {
|
|
status = "disabled";
|
|
|
|
compatible = "qcom,mdss-dsi-ctrl";
|
|
reg = <0xfd922800 0x1f8>;
|
|
reg-names = "dsi_ctrl";
|
|
|
|
interrupt-parent = <&mdss>;
|
|
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
assigned-clocks = <&mmcc BYTE0_CLK_SRC>,
|
|
<&mmcc PCLK0_CLK_SRC>;
|
|
assigned-clock-parents = <&dsi_phy0 0>,
|
|
<&dsi_phy0 1>;
|
|
|
|
clocks = <&mmcc MDSS_MDP_CLK>,
|
|
<&mmcc MDSS_AHB_CLK>,
|
|
<&mmcc MDSS_AXI_CLK>,
|
|
<&mmcc MDSS_BYTE0_CLK>,
|
|
<&mmcc MDSS_PCLK0_CLK>,
|
|
<&mmcc MDSS_ESC0_CLK>,
|
|
<&mmcc MMSS_MISC_AHB_CLK>;
|
|
clock-names = "mdp_core",
|
|
"iface",
|
|
"bus",
|
|
"byte",
|
|
"pixel",
|
|
"core",
|
|
"core_mmss";
|
|
|
|
phys = <&dsi_phy0>;
|
|
phy-names = "dsi-phy";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
dsi0_in: endpoint {
|
|
remote-endpoint = <&mdp5_intf1_out>;
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
dsi0_out: endpoint {
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
dsi_phy0: dsi-phy@fd922a00 {
|
|
status = "disabled";
|
|
|
|
compatible = "qcom,dsi-phy-28nm-hpm";
|
|
reg = <0xfd922a00 0xd4>,
|
|
<0xfd922b00 0x280>,
|
|
<0xfd922d80 0x30>;
|
|
reg-names = "dsi_pll",
|
|
"dsi_phy",
|
|
"dsi_phy_regulator";
|
|
|
|
#clock-cells = <1>;
|
|
#phy-cells = <0>;
|
|
qcom,dsi-phy-index = <0>;
|
|
|
|
clocks = <&mmcc MDSS_AHB_CLK>;
|
|
clock-names = "iface";
|
|
};
|
|
};
|
|
|
|
imem@fe805000 {
|
|
status = "disabled";
|
|
compatible = "syscon", "simple-mfd";
|
|
reg = <0xfe805000 0x1000>;
|
|
|
|
reboot-mode {
|
|
compatible = "syscon-reboot-mode";
|
|
offset = <0x65c>;
|
|
};
|
|
};
|
|
};
|
|
|
|
smd {
|
|
compatible = "qcom,smd";
|
|
|
|
rpm {
|
|
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
|
|
qcom,ipc = <&apcs 8 0>;
|
|
qcom,smd-edge = <15>;
|
|
|
|
rpm_requests {
|
|
compatible = "qcom,rpm-msm8974";
|
|
qcom,smd-channels = "rpm_requests";
|
|
|
|
rpmcc: clock-controller {
|
|
compatible = "qcom,rpmcc-msm8974", "qcom,rpmcc";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
pm8841-regulators {
|
|
compatible = "qcom,rpm-pm8841-regulators";
|
|
|
|
pm8841_s1: s1 {};
|
|
pm8841_s2: s2 {};
|
|
pm8841_s3: s3 {};
|
|
pm8841_s4: s4 {};
|
|
pm8841_s5: s5 {};
|
|
pm8841_s6: s6 {};
|
|
pm8841_s7: s7 {};
|
|
pm8841_s8: s8 {};
|
|
};
|
|
|
|
pm8941-regulators {
|
|
compatible = "qcom,rpm-pm8941-regulators";
|
|
|
|
pm8941_s1: s1 {};
|
|
pm8941_s2: s2 {};
|
|
pm8941_s3: s3 {};
|
|
|
|
pm8941_l1: l1 {};
|
|
pm8941_l2: l2 {};
|
|
pm8941_l3: l3 {};
|
|
pm8941_l4: l4 {};
|
|
pm8941_l5: l5 {};
|
|
pm8941_l6: l6 {};
|
|
pm8941_l7: l7 {};
|
|
pm8941_l8: l8 {};
|
|
pm8941_l9: l9 {};
|
|
pm8941_l10: l10 {};
|
|
pm8941_l11: l11 {};
|
|
pm8941_l12: l12 {};
|
|
pm8941_l13: l13 {};
|
|
pm8941_l14: l14 {};
|
|
pm8941_l15: l15 {};
|
|
pm8941_l16: l16 {};
|
|
pm8941_l17: l17 {};
|
|
pm8941_l18: l18 {};
|
|
pm8941_l19: l19 {};
|
|
pm8941_l20: l20 {};
|
|
pm8941_l21: l21 {};
|
|
pm8941_l22: l22 {};
|
|
pm8941_l23: l23 {};
|
|
pm8941_l24: l24 {};
|
|
|
|
pm8941_lvs1: lvs1 {};
|
|
pm8941_lvs2: lvs2 {};
|
|
pm8941_lvs3: lvs3 {};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
vreg_boost: vreg-boost {
|
|
compatible = "regulator-fixed";
|
|
|
|
regulator-name = "vreg-boost";
|
|
regulator-min-microvolt = <3150000>;
|
|
regulator-max-microvolt = <3150000>;
|
|
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
|
|
gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&boost_bypass_n_pin>;
|
|
};
|
|
vreg_vph_pwr: vreg-vph-pwr {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vph-pwr";
|
|
|
|
regulator-min-microvolt = <3600000>;
|
|
regulator-max-microvolt = <3600000>;
|
|
|
|
regulator-always-on;
|
|
};
|
|
};
|