mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-26 19:05:23 +07:00
82822c6859
Add a common DT include file for the Kizbox3 boards. Add the devicetree for the Kizbox3 HS board. Signed-off-by: Kévin RAYMOND <k.raymond@overkiz.com> Signed-off-by: Mickael GARDET <m.gardet@overkiz.com> Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com> Link: https://lore.kernel.org/r/20191011125022.16329-4-kamel.bouhara@bootlin.com Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
413 lines
8.1 KiB
Plaintext
413 lines
8.1 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* at91-kizbox3.dts - Device Tree Include file for Overkiz Kizbox 3
|
|
* family SoC boards
|
|
*
|
|
* Copyright (C) 2018 Overkiz SAS
|
|
*
|
|
* Authors: Dorian Rocipon <d.rocipon@overkiz.com>
|
|
* Kevin Carli <k.carli@overkiz.com>
|
|
* Mickael Gardet <m.gardet@overkiz.com>
|
|
*/
|
|
/dts-v1/;
|
|
#include "sama5d2.dtsi"
|
|
#include "sama5d2-pinfunc.h"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/mfd/atmel-flexcom.h>
|
|
#include <dt-bindings/pinctrl/at91.h>
|
|
#include <dt-bindings/pwm/pwm.h>
|
|
|
|
/ {
|
|
model = "Overkiz Kizbox3";
|
|
compatible = "overkiz,kizbox3", "atmel,sama5d2", "atmel,sama5";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
serial2 = &uart2;
|
|
serial3 = &uart3;
|
|
serial4 = &uart4;
|
|
serial5 = &uart5;
|
|
serial6 = &uart6;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "ubi.mtd=ubi";
|
|
stdout-path = "serial1:115200n8";
|
|
};
|
|
|
|
clocks {
|
|
slow_xtal {
|
|
clock-frequency = <32768>;
|
|
};
|
|
|
|
main_xtal {
|
|
clock-frequency = <12000000>;
|
|
};
|
|
};
|
|
|
|
vdd_adc_vddana: supply_3v3_ana {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "adc-vddana";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vdd_adc_vref: supply_3v3_ref {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "adc-vref";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
};
|
|
|
|
pwm_leds {
|
|
compatible = "pwm-leds";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_pwm0_pwm_h0
|
|
&pinctrl_pwm0_pwm_h1
|
|
&pinctrl_pwm0_pwm_h2
|
|
&pinctrl_pwm0_pwm_h3>;
|
|
status = "disabled";
|
|
|
|
red {
|
|
label = "pwm:red:user";
|
|
pwms = <&pwm0 0 10000000 0>;
|
|
max-brightness = <255>;
|
|
linux,default-trigger = "default-on";
|
|
status = "disabled";
|
|
};
|
|
|
|
green {
|
|
label = "pwm:green:user";
|
|
pwms = <&pwm0 1 10000000 0>;
|
|
max-brightness = <255>;
|
|
linux,default-trigger = "default-on";
|
|
status = "disabled";
|
|
};
|
|
|
|
blue {
|
|
label = "pwm:blue:user";
|
|
pwms = <&pwm0 2 10000000 0>;
|
|
max-brightness = <255>;
|
|
status = "disabled";
|
|
};
|
|
|
|
white {
|
|
label = "pwm:white:user";
|
|
pwms = <&pwm0 3 10000000 0>;
|
|
max-brightness = <255>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
};
|
|
|
|
&ebi {
|
|
status = "okay";
|
|
};
|
|
|
|
&nand_controller {
|
|
status = "okay";
|
|
|
|
nand@3 {
|
|
pinctrl-0 = <&pinctrl_ebi_nand_addr>;
|
|
pinctrl-names = "default";
|
|
reg = <0x3 0x0 0x800000>;
|
|
|
|
atmel,rb = <0>;
|
|
nand-bus-width = <8>;
|
|
nand-ecc-mode = "hw";
|
|
nand-ecc-strength = <4>;
|
|
nand-ecc-step-size = <512>;
|
|
nand-on-flash-bbt;
|
|
label = "atmel_nand";
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
bootstrap@0 {
|
|
label = "bootstrap";
|
|
reg = <0x0 0x20000>;
|
|
};
|
|
|
|
u-boot@20000 {
|
|
label = "u-boot";
|
|
reg = <0x20000 0x140000>;
|
|
};
|
|
|
|
u-boot-factory@160000 {
|
|
label = "u-boot-factory";
|
|
reg = <0x160000 0x140000>;
|
|
};
|
|
|
|
ubi@2A0000 {
|
|
label = "ubi";
|
|
reg = <0x2A0000 0x7D60000>;
|
|
};
|
|
};
|
|
|
|
};
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
};
|
|
|
|
&pioA {
|
|
pinctrl_ebi_nand_addr: ebi-addr-1 {
|
|
pinmux = <PIN_PA0__D0>,
|
|
<PIN_PA1__D1>,
|
|
<PIN_PA2__D2>,
|
|
<PIN_PA3__D3>,
|
|
<PIN_PA4__D4>,
|
|
<PIN_PA5__D5>,
|
|
<PIN_PA6__D6>,
|
|
<PIN_PA7__D7>,
|
|
<PIN_PA8__NWE_NANDWE>,
|
|
<PIN_PA9__NCS3>,
|
|
<PIN_PA10__A21_NANDALE>,
|
|
<PIN_PA11__A22_NANDCLE>,
|
|
<PIN_PA21__NANDRDY>;
|
|
bias-disable;
|
|
};
|
|
|
|
pinctrl_usart {
|
|
pinctrl_usart_0: usart0-0 {
|
|
pinmux = < PIN_PB26__URXD0>, <PIN_PB27__UTXD0>;
|
|
bias-disable;
|
|
};
|
|
pinctrl_usart_1: usart1-0 {
|
|
pinmux = < PIN_PD2__URXD1>, <PIN_PD3__UTXD1>;
|
|
bias-disable;
|
|
};
|
|
pinctrl_usart_2: usart2-0 {
|
|
pinmux = < PIN_PD4__URXD2>, <PIN_PD5__UTXD2>;
|
|
bias-disable;
|
|
};
|
|
pinctrl_usart_3: usart3-0 {
|
|
pinmux = < PIN_PC12__URXD3>, <PIN_PC13__UTXD3>;
|
|
bias-disable;
|
|
};
|
|
pinctrl_usart_4: usart4-0 {
|
|
pinmux = < PIN_PB3__URXD4>, <PIN_PB4__UTXD4>;
|
|
bias-disable;
|
|
};
|
|
pinctrl_flx0_default: flx0_usart_default {
|
|
pinmux = <PIN_PB28__FLEXCOM0_IO0>, //TX
|
|
<PIN_PB29__FLEXCOM0_IO1>; //RX
|
|
bias-disable;
|
|
};
|
|
pinctrl_flx3_default: flx3_usart_default {
|
|
pinmux = <PIN_PB22__FLEXCOM3_IO1>, //RX
|
|
<PIN_PB23__FLEXCOM3_IO0>; //TX
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pinctrl_flx4_default: flx4_i2c2_default {
|
|
pinmux = <PIN_PD12__FLEXCOM4_IO0>, //DATA
|
|
<PIN_PD13__FLEXCOM4_IO1>; //CLK
|
|
bias-disable;
|
|
drive-open-drain = <1>;
|
|
};
|
|
|
|
pinctrl_pwm0 {
|
|
pinctrl_pwm0_pwm_h0: pwm0_pwm_h0 {
|
|
pinmux = <PIN_PA30__PWMH0>;
|
|
bias-disable;
|
|
};
|
|
pinctrl_pwm0_pwm_h1: pwm0_pwmh1 {
|
|
pinmux = <PIN_PB0__PWMH1>;
|
|
bias-disable;
|
|
};
|
|
pinctrl_pwm0_pwm_h2: pwm0_pwm_h2 {
|
|
pinmux = <PIN_PB5__PWMH2>;
|
|
bias-disable;
|
|
};
|
|
pinctrl_pwm0_pwm_h3: pwm0_pwm_h3 {
|
|
pinmux = <PIN_PB7__PWMH3>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pinctrl_adc {
|
|
pinctrl_adc2: adc2 {
|
|
pinmux = <PIN_PD21__GPIO>;
|
|
bias-disable;
|
|
};
|
|
pinctrl_adc3: adc3 {
|
|
pinmux = <PIN_PD22__GPIO>;
|
|
bias-disable;
|
|
};
|
|
pinctrl_adc4: adc4 {
|
|
pinmux = <PIN_PD23__GPIO>;
|
|
bias-disable;
|
|
};
|
|
pinctrl_adc5: adc5 {
|
|
pinmux = <PIN_PD24__GPIO>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
&uart0 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usart_0>;
|
|
atmel,use-dma-rx;
|
|
atmel,use-dma-tx;
|
|
status = "disabled";
|
|
};
|
|
|
|
/* debug uart */
|
|
&uart1 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usart_1>;
|
|
atmel,use-dma-rx;
|
|
atmel,use-dma-tx;
|
|
status = "disabled";
|
|
};
|
|
|
|
&uart2 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usart_2>;
|
|
atmel,use-dma-rx;
|
|
atmel,use-dma-tx;
|
|
status = "disabled";
|
|
};
|
|
|
|
&uart3 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usart_3>;
|
|
atmel,use-dma-rx;
|
|
atmel,use-dma-tx;
|
|
status = "disabled";
|
|
};
|
|
|
|
&uart4 {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usart_4>;
|
|
atmel,use-dma-rx;
|
|
atmel,use-dma-tx;
|
|
status = "disabled";
|
|
};
|
|
|
|
&flx0 {
|
|
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
|
|
status = "disabled";
|
|
|
|
uart5: serial@200 {
|
|
compatible = "atmel,at91sam9260-usart";
|
|
reg = <0x200 0x400>;
|
|
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
|
|
dmas = <&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(11))>,
|
|
<&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(12))>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
|
|
clock-names = "usart";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_flx0_default>;
|
|
atmel,fifo-size = <32>;
|
|
atmel,use-dma-rx;
|
|
atmel,use-dma-tx;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
&flx3 {
|
|
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
|
|
status = "disabled";
|
|
|
|
uart6: serial@200 {
|
|
compatible = "atmel,at91sam9260-usart";
|
|
reg = <0x200 0x400>;
|
|
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
|
|
dmas = <&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(17))>,
|
|
<&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(18))>;
|
|
dma-names = "tx", "rx";
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
|
|
clock-names = "usart";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_flx3_default>;
|
|
atmel,fifo-size = <32>;
|
|
atmel,use-dma-rx;
|
|
atmel,use-dma-tx;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
&flx4 {
|
|
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_TWI>;
|
|
status = "disabled";
|
|
|
|
i2c2: i2c@600 {
|
|
compatible = "atmel,sama5d2-i2c";
|
|
reg = <0x600 0x200>;
|
|
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
|
|
dmas = <&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(19))>,
|
|
<&dma0
|
|
(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
|
|
| AT91_XDMAC_DT_PERID(20))>;
|
|
dma-names = "tx", "rx";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_flx4_default>;
|
|
atmel,fifo-size = <16>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
&pwm0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&shutdown_controller {
|
|
atmel,shdwc-debouncer = <976>;
|
|
atmel,wakeup-rtc-timer;
|
|
|
|
input@0 {
|
|
reg = <0>;
|
|
atmel,wakeup-type = "low";
|
|
};
|
|
};
|
|
|
|
&watchdog {
|
|
status = "okay";
|
|
};
|
|
|
|
&adc {
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_adc2
|
|
&pinctrl_adc3
|
|
&pinctrl_adc4
|
|
&pinctrl_adc5>;
|
|
|
|
vddana-supply = <&vdd_adc_vddana>;
|
|
vref-supply = <&vdd_adc_vref>;
|
|
status = "disabled";
|
|
};
|
|
|
|
&securam {
|
|
export;
|
|
|
|
/* export overkiz u-boot mode/version and factory */
|
|
uboot@1400 {
|
|
reg = <0x1400 0x20>;
|
|
export;
|
|
};
|
|
};
|