linux_dsm_epyc7002/drivers/gpu/drm/panel/panel-lvds.c
Jyri Sarha 38992c57c9 drm/panel: Remove drm_panel_detach() calls from all panel drivers
Remove all drm_panel_detach() calls from all panel drivers and update
the kerneldoc for drm_panel_detach().

Setting the connector and drm to NULL when the DRM panel device is going
away hardly serves any purpose. Usually the whole memory structure is
freed right after the remove call. However, calling the detach function
from the master DRM device, and setting the connector pointer to NULL,
has the logic of marking the panel again as available for another DRM
master to attach. The usual situation would be the same DRM master
device binding again.

Signed-off-by: Jyri Sarha <jsarha@ti.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/464b8d330d6b4c94cfb5aad2ca9ea7eb2c52d934.1524727888.git.jsarha@ti.com
2018-05-18 11:22:06 +02:00

316 lines
7.4 KiB
C

/*
* Generic LVDS panel driver
*
* Copyright (C) 2016 Laurent Pinchart
* Copyright (C) 2016 Renesas Electronics Corporation
*
* Contact: Laurent Pinchart (laurent.pinchart@ideasonboard.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/backlight.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <drm/drmP.h>
#include <drm/drm_crtc.h>
#include <drm/drm_panel.h>
#include <video/display_timing.h>
#include <video/of_display_timing.h>
#include <video/videomode.h>
struct panel_lvds {
struct drm_panel panel;
struct device *dev;
const char *label;
unsigned int width;
unsigned int height;
struct videomode video_mode;
unsigned int bus_format;
bool data_mirror;
struct backlight_device *backlight;
struct regulator *supply;
struct gpio_desc *enable_gpio;
struct gpio_desc *reset_gpio;
};
static inline struct panel_lvds *to_panel_lvds(struct drm_panel *panel)
{
return container_of(panel, struct panel_lvds, panel);
}
static int panel_lvds_disable(struct drm_panel *panel)
{
struct panel_lvds *lvds = to_panel_lvds(panel);
if (lvds->backlight) {
lvds->backlight->props.power = FB_BLANK_POWERDOWN;
lvds->backlight->props.state |= BL_CORE_FBBLANK;
backlight_update_status(lvds->backlight);
}
return 0;
}
static int panel_lvds_unprepare(struct drm_panel *panel)
{
struct panel_lvds *lvds = to_panel_lvds(panel);
if (lvds->enable_gpio)
gpiod_set_value_cansleep(lvds->enable_gpio, 0);
if (lvds->supply)
regulator_disable(lvds->supply);
return 0;
}
static int panel_lvds_prepare(struct drm_panel *panel)
{
struct panel_lvds *lvds = to_panel_lvds(panel);
if (lvds->supply) {
int err;
err = regulator_enable(lvds->supply);
if (err < 0) {
dev_err(lvds->dev, "failed to enable supply: %d\n",
err);
return err;
}
}
if (lvds->enable_gpio)
gpiod_set_value_cansleep(lvds->enable_gpio, 1);
return 0;
}
static int panel_lvds_enable(struct drm_panel *panel)
{
struct panel_lvds *lvds = to_panel_lvds(panel);
if (lvds->backlight) {
lvds->backlight->props.state &= ~BL_CORE_FBBLANK;
lvds->backlight->props.power = FB_BLANK_UNBLANK;
backlight_update_status(lvds->backlight);
}
return 0;
}
static int panel_lvds_get_modes(struct drm_panel *panel)
{
struct panel_lvds *lvds = to_panel_lvds(panel);
struct drm_connector *connector = lvds->panel.connector;
struct drm_display_mode *mode;
mode = drm_mode_create(lvds->panel.drm);
if (!mode)
return 0;
drm_display_mode_from_videomode(&lvds->video_mode, mode);
mode->type |= DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
drm_mode_probed_add(connector, mode);
connector->display_info.width_mm = lvds->width;
connector->display_info.height_mm = lvds->height;
drm_display_info_set_bus_formats(&connector->display_info,
&lvds->bus_format, 1);
connector->display_info.bus_flags = lvds->data_mirror
? DRM_BUS_FLAG_DATA_LSB_TO_MSB
: DRM_BUS_FLAG_DATA_MSB_TO_LSB;
return 1;
}
static const struct drm_panel_funcs panel_lvds_funcs = {
.disable = panel_lvds_disable,
.unprepare = panel_lvds_unprepare,
.prepare = panel_lvds_prepare,
.enable = panel_lvds_enable,
.get_modes = panel_lvds_get_modes,
};
static int panel_lvds_parse_dt(struct panel_lvds *lvds)
{
struct device_node *np = lvds->dev->of_node;
struct display_timing timing;
const char *mapping;
int ret;
ret = of_get_display_timing(np, "panel-timing", &timing);
if (ret < 0)
return ret;
videomode_from_timing(&timing, &lvds->video_mode);
ret = of_property_read_u32(np, "width-mm", &lvds->width);
if (ret < 0) {
dev_err(lvds->dev, "%pOF: invalid or missing %s DT property\n",
np, "width-mm");
return -ENODEV;
}
ret = of_property_read_u32(np, "height-mm", &lvds->height);
if (ret < 0) {
dev_err(lvds->dev, "%pOF: invalid or missing %s DT property\n",
np, "height-mm");
return -ENODEV;
}
of_property_read_string(np, "label", &lvds->label);
ret = of_property_read_string(np, "data-mapping", &mapping);
if (ret < 0) {
dev_err(lvds->dev, "%pOF: invalid or missing %s DT property\n",
np, "data-mapping");
return -ENODEV;
}
if (!strcmp(mapping, "jeida-18")) {
lvds->bus_format = MEDIA_BUS_FMT_RGB666_1X7X3_SPWG;
} else if (!strcmp(mapping, "jeida-24")) {
lvds->bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_JEIDA;
} else if (!strcmp(mapping, "vesa-24")) {
lvds->bus_format = MEDIA_BUS_FMT_RGB888_1X7X4_SPWG;
} else {
dev_err(lvds->dev, "%pOF: invalid or missing %s DT property\n",
np, "data-mapping");
return -EINVAL;
}
lvds->data_mirror = of_property_read_bool(np, "data-mirror");
return 0;
}
static int panel_lvds_probe(struct platform_device *pdev)
{
struct panel_lvds *lvds;
struct device_node *np;
int ret;
lvds = devm_kzalloc(&pdev->dev, sizeof(*lvds), GFP_KERNEL);
if (!lvds)
return -ENOMEM;
lvds->dev = &pdev->dev;
ret = panel_lvds_parse_dt(lvds);
if (ret < 0)
return ret;
lvds->supply = devm_regulator_get_optional(lvds->dev, "power");
if (IS_ERR(lvds->supply)) {
ret = PTR_ERR(lvds->supply);
if (ret != -ENODEV) {
if (ret != -EPROBE_DEFER)
dev_err(lvds->dev, "failed to request regulator: %d\n",
ret);
return ret;
}
lvds->supply = NULL;
}
/* Get GPIOs and backlight controller. */
lvds->enable_gpio = devm_gpiod_get_optional(lvds->dev, "enable",
GPIOD_OUT_LOW);
if (IS_ERR(lvds->enable_gpio)) {
ret = PTR_ERR(lvds->enable_gpio);
dev_err(lvds->dev, "failed to request %s GPIO: %d\n",
"enable", ret);
return ret;
}
lvds->reset_gpio = devm_gpiod_get_optional(lvds->dev, "reset",
GPIOD_OUT_HIGH);
if (IS_ERR(lvds->reset_gpio)) {
ret = PTR_ERR(lvds->reset_gpio);
dev_err(lvds->dev, "failed to request %s GPIO: %d\n",
"reset", ret);
return ret;
}
np = of_parse_phandle(lvds->dev->of_node, "backlight", 0);
if (np) {
lvds->backlight = of_find_backlight_by_node(np);
of_node_put(np);
if (!lvds->backlight)
return -EPROBE_DEFER;
}
/*
* TODO: Handle all power supplies specified in the DT node in a generic
* way for panels that don't care about power supply ordering. LVDS
* panels that require a specific power sequence will need a dedicated
* driver.
*/
/* Register the panel. */
drm_panel_init(&lvds->panel);
lvds->panel.dev = lvds->dev;
lvds->panel.funcs = &panel_lvds_funcs;
ret = drm_panel_add(&lvds->panel);
if (ret < 0)
goto error;
dev_set_drvdata(lvds->dev, lvds);
return 0;
error:
put_device(&lvds->backlight->dev);
return ret;
}
static int panel_lvds_remove(struct platform_device *pdev)
{
struct panel_lvds *lvds = dev_get_drvdata(&pdev->dev);
drm_panel_remove(&lvds->panel);
panel_lvds_disable(&lvds->panel);
if (lvds->backlight)
put_device(&lvds->backlight->dev);
return 0;
}
static const struct of_device_id panel_lvds_of_table[] = {
{ .compatible = "panel-lvds", },
{ /* Sentinel */ },
};
MODULE_DEVICE_TABLE(of, panel_lvds_of_table);
static struct platform_driver panel_lvds_driver = {
.probe = panel_lvds_probe,
.remove = panel_lvds_remove,
.driver = {
.name = "panel-lvds",
.of_match_table = panel_lvds_of_table,
},
};
module_platform_driver(panel_lvds_driver);
MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
MODULE_DESCRIPTION("LVDS Panel Driver");
MODULE_LICENSE("GPL");