linux_dsm_epyc7002/arch/arm/include/asm/pmu.h
Will Deacon 9fd85eb502 ARM: pmu: add support for interrupt-affinity property
Historically, the PMU devicetree bindings have expected SPIs to be
listed in order of *logical* CPU number. This is problematic for
bootloaders, especially when the boot CPU (logical ID 0) isn't listed
first in the devicetree.

This patch adds a new optional property, interrupt-affinity, to the
PMU node which allows the interrupt affinity to be described using
a list of phandled to CPU nodes, with each entry in the list
corresponding to the SPI at the same index in the interrupts property.

Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
2015-03-24 15:07:57 +00:00

164 lines
4.7 KiB
C

/*
* linux/arch/arm/include/asm/pmu.h
*
* Copyright (C) 2009 picoChip Designs Ltd, Jamie Iles
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef __ARM_PMU_H__
#define __ARM_PMU_H__
#include <linux/interrupt.h>
#include <linux/perf_event.h>
#include <asm/cputype.h>
/*
* struct arm_pmu_platdata - ARM PMU platform data
*
* @handle_irq: an optional handler which will be called from the
* interrupt and passed the address of the low level handler,
* and can be used to implement any platform specific handling
* before or after calling it.
* @runtime_resume: an optional handler which will be called by the
* runtime PM framework following a call to pm_runtime_get().
* Note that if pm_runtime_get() is called more than once in
* succession this handler will only be called once.
* @runtime_suspend: an optional handler which will be called by the
* runtime PM framework following a call to pm_runtime_put().
* Note that if pm_runtime_get() is called more than once in
* succession this handler will only be called following the
* final call to pm_runtime_put() that actually disables the
* hardware.
*/
struct arm_pmu_platdata {
irqreturn_t (*handle_irq)(int irq, void *dev,
irq_handler_t pmu_handler);
int (*runtime_resume)(struct device *dev);
int (*runtime_suspend)(struct device *dev);
};
#ifdef CONFIG_HW_PERF_EVENTS
/*
* The ARMv7 CPU PMU supports up to 32 event counters.
*/
#define ARMPMU_MAX_HWEVENTS 32
#define HW_OP_UNSUPPORTED 0xFFFF
#define C(_x) PERF_COUNT_HW_CACHE_##_x
#define CACHE_OP_UNSUPPORTED 0xFFFF
#define PERF_MAP_ALL_UNSUPPORTED \
[0 ... PERF_COUNT_HW_MAX - 1] = HW_OP_UNSUPPORTED
#define PERF_CACHE_MAP_ALL_UNSUPPORTED \
[0 ... C(MAX) - 1] = { \
[0 ... C(OP_MAX) - 1] = { \
[0 ... C(RESULT_MAX) - 1] = CACHE_OP_UNSUPPORTED, \
}, \
}
/* The events for a given PMU register set. */
struct pmu_hw_events {
/*
* The events that are active on the PMU for the given index.
*/
struct perf_event *events[ARMPMU_MAX_HWEVENTS];
/*
* A 1 bit for an index indicates that the counter is being used for
* an event. A 0 means that the counter can be used.
*/
DECLARE_BITMAP(used_mask, ARMPMU_MAX_HWEVENTS);
/*
* Hardware lock to serialize accesses to PMU registers. Needed for the
* read/modify/write sequences.
*/
raw_spinlock_t pmu_lock;
/*
* When using percpu IRQs, we need a percpu dev_id. Place it here as we
* already have to allocate this struct per cpu.
*/
struct arm_pmu *percpu_pmu;
};
struct arm_pmu {
struct pmu pmu;
cpumask_t active_irqs;
int *irq_affinity;
char *name;
irqreturn_t (*handle_irq)(int irq_num, void *dev);
void (*enable)(struct perf_event *event);
void (*disable)(struct perf_event *event);
int (*get_event_idx)(struct pmu_hw_events *hw_events,
struct perf_event *event);
void (*clear_event_idx)(struct pmu_hw_events *hw_events,
struct perf_event *event);
int (*set_event_filter)(struct hw_perf_event *evt,
struct perf_event_attr *attr);
u32 (*read_counter)(struct perf_event *event);
void (*write_counter)(struct perf_event *event, u32 val);
void (*start)(struct arm_pmu *);
void (*stop)(struct arm_pmu *);
void (*reset)(void *);
int (*request_irq)(struct arm_pmu *, irq_handler_t handler);
void (*free_irq)(struct arm_pmu *);
int (*map_event)(struct perf_event *event);
int num_events;
atomic_t active_events;
struct mutex reserve_mutex;
u64 max_period;
struct platform_device *plat_device;
struct pmu_hw_events __percpu *hw_events;
struct notifier_block hotplug_nb;
};
#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
extern const struct dev_pm_ops armpmu_dev_pm_ops;
int armpmu_register(struct arm_pmu *armpmu, int type);
u64 armpmu_event_update(struct perf_event *event);
int armpmu_event_set_period(struct perf_event *event);
int armpmu_map_event(struct perf_event *event,
const unsigned (*event_map)[PERF_COUNT_HW_MAX],
const unsigned (*cache_map)[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
[PERF_COUNT_HW_CACHE_RESULT_MAX],
u32 raw_event_mask);
struct pmu_probe_info {
unsigned int cpuid;
unsigned int mask;
int (*init)(struct arm_pmu *);
};
#define PMU_PROBE(_cpuid, _mask, _fn) \
{ \
.cpuid = (_cpuid), \
.mask = (_mask), \
.init = (_fn), \
}
#define ARM_PMU_PROBE(_cpuid, _fn) \
PMU_PROBE(_cpuid, ARM_CPU_PART_MASK, _fn)
#define ARM_PMU_XSCALE_MASK ((0xff << 24) | ARM_CPU_XSCALE_ARCH_MASK)
#define XSCALE_PMU_PROBE(_version, _fn) \
PMU_PROBE(ARM_CPU_IMP_INTEL << 24 | _version, ARM_PMU_XSCALE_MASK, _fn)
#endif /* CONFIG_HW_PERF_EVENTS */
#endif /* __ARM_PMU_H__ */