linux_dsm_epyc7002/arch/mips/cobalt/setup.c
Ralf Baechle c83cfc9c94 Get rid of early_init. There's more need to make this form of
initialization actually useful and as is certainly unmergable with
upstream.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:30:18 +01:00

149 lines
3.7 KiB
C

/*
* Setup pointers to hardware dependent routines.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1996, 1997, 2004 by Ralf Baechle (ralf@linux-mips.org)
* Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv)
*
*/
#include <linux/config.h>
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <asm/bootinfo.h>
#include <asm/time.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/processor.h>
#include <asm/reboot.h>
#include <asm/gt64120.h>
#include <asm/cobalt/cobalt.h>
extern void cobalt_machine_restart(char *command);
extern void cobalt_machine_halt(void);
extern void cobalt_machine_power_off(void);
int cobalt_board_id;
static char my_cmdline[CL_SIZE] = {
"console=ttyS0,115200 "
#ifdef CONFIG_IP_PNP
"ip=on "
#endif
#ifdef CONFIG_ROOT_NFS
"root=/dev/nfs "
#else
"root=/dev/hda1 "
#endif
};
const char *get_system_type(void)
{
return "MIPS Cobalt";
}
static void __init cobalt_timer_setup(struct irqaction *irq)
{
/* Load timer value for 150 Hz */
GALILEO_OUTL(500000, GT_TC0_OFS);
/* Register our timer interrupt */
setup_irq(COBALT_TIMER_IRQ, irq);
/* Enable timer ints */
GALILEO_OUTL((GALILEO_ENTC0 | GALILEO_SELTC0), GT_TC_CONTROL_OFS);
/* Unmask timer int */
GALILEO_OUTL(0x100, GT_INTRMASK_OFS);
}
extern struct pci_ops gt64111_pci_ops;
static struct resource cobalt_mem_resource = {
"GT64111 PCI MEM", GT64111_IO_BASE, 0xffffffffUL, IORESOURCE_MEM
};
static struct resource cobalt_io_resource = {
"GT64111 IO MEM", 0x00001000UL, 0x0fffffffUL, IORESOURCE_IO
};
static struct resource cobalt_io_resources[] = {
{ "dma1", 0x00, 0x1f, IORESOURCE_BUSY },
{ "timer", 0x40, 0x5f, IORESOURCE_BUSY },
{ "keyboard", 0x60, 0x6f, IORESOURCE_BUSY },
{ "dma page reg", 0x80, 0x8f, IORESOURCE_BUSY },
{ "dma2", 0xc0, 0xdf, IORESOURCE_BUSY },
};
#define COBALT_IO_RESOURCES (sizeof(cobalt_io_resources)/sizeof(struct resource))
static struct pci_controller cobalt_pci_controller = {
.pci_ops = &gt64111_pci_ops,
.mem_resource = &cobalt_mem_resource,
.mem_offset = 0,
.io_resource = &cobalt_io_resource,
.io_offset = 0x00001000UL - GT64111_IO_BASE
};
void __init plat_setup(void)
{
unsigned int devfn = PCI_DEVFN(COBALT_PCICONF_VIA, 0);
int i;
_machine_restart = cobalt_machine_restart;
_machine_halt = cobalt_machine_halt;
_machine_power_off = cobalt_machine_power_off;
board_timer_setup = cobalt_timer_setup;
set_io_port_base(KSEG1ADDR(GT64111_IO_BASE));
/*
* This is a prom style console. We just poke at the
* UART to make it talk.
* Only use this console if you really screw up and can't
* get to the stage of setting up a real serial console.
*/
/*ns16550_setup_console();*/
/* request I/O space for devices used on all i[345]86 PCs */
for (i = 0; i < COBALT_IO_RESOURCES; i++)
request_resource(&ioport_resource, cobalt_io_resources + i);
/* Read the cobalt id register out of the PCI config space */
PCI_CFG_SET(devfn, (VIA_COBALT_BRD_ID_REG & ~0x3));
cobalt_board_id = GALILEO_INL(GT_PCI0_CFGDATA_OFS);
cobalt_board_id >>= ((VIA_COBALT_BRD_ID_REG & 3) * 8);
cobalt_board_id = VIA_COBALT_BRD_REG_to_ID(cobalt_board_id);
#ifdef CONFIG_PCI
register_pci_controller(&cobalt_pci_controller);
#endif
}
/*
* Prom init. We read our one and only communication with the firmware.
* Grab the amount of installed memory
*/
void __init prom_init(void)
{
int argc = fw_arg0;
strcpy(arcs_cmdline, my_cmdline);
mips_machgroup = MACH_GROUP_COBALT;
add_memory_region(0x0, argc & 0x7fffffff, BOOT_MEM_RAM);
}
unsigned long __init prom_free_prom_memory(void)
{
/* Nothing to do! */
return 0;
}