mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 04:35:17 +07:00
c7ff819aef
Allow a ULP to ask the core to provide a completion queue based on a least-used search on a per-device CQ pools. The device CQ pools grow in a lazy fashion when more CQs are requested. This feature reduces the amount of interrupts when using many QPs. Using shared CQs allows for more effcient completion handling. It also reduces the amount of overhead needed for CQ contexts. Test setup: Intel(R) Xeon(R) Platinum 8176M CPU @ 2.10GHz servers. Running NVMeoF 4KB read IOs over ConnectX-5EX across Spectrum switch. TX-depth = 32. The patch was applied in the nvme driver on both the target and initiator. Four controllers are accessed from each core. In the current test case we have exposed sixteen NVMe namespaces using four different subsystems (four namespaces per subsystem) from one NVM port. Each controller allocated X queues (RDMA QPs) and attached to Y CQs. Before this series we had X == Y, i.e for four controllers we've created total of 4X QPs and 4X CQs. In the shared case, we've created 4X QPs and only X CQs which means that we have four controllers that share a completion queue per core. Until fourteen cores there is no significant change in performance and the number of interrupts per second is less than a million in the current case. ================================================== |Cores|Current KIOPs |Shared KIOPs |improvement| |-----|---------------|--------------|-----------| |14 |2332 |2723 |16.7% | |-----|---------------|--------------|-----------| |20 |2086 |2712 |30% | |-----|---------------|--------------|-----------| |28 |1971 |2669 |35.4% | |================================================= |Cores|Current avg lat|Shared avg lat|improvement| |-----|---------------|--------------|-----------| |14 |767us |657us |14.3% | |-----|---------------|--------------|-----------| |20 |1225us |943us |23% | |-----|---------------|--------------|-----------| |28 |1816us |1341us |26.1% | ======================================================== |Cores|Current interrupts|Shared interrupts|improvement| |-----|------------------|-----------------|-----------| |14 |1.6M/sec |0.4M/sec |72% | |-----|------------------|-----------------|-----------| |20 |2.8M/sec |0.6M/sec |72.4% | |-----|------------------|-----------------|-----------| |28 |2.9M/sec |0.8M/sec |63.4% | ==================================================================== |Cores|Current 99.99th PCTL lat|Shared 99.99th PCTL lat|improvement| |-----|------------------------|-----------------------|-----------| |14 |67ms |6ms |90.9% | |-----|------------------------|-----------------------|-----------| |20 |5ms |6ms |-10% | |-----|------------------------|-----------------------|-----------| |28 |8.7ms |6ms |25.9% | |=================================================================== Performance improvement with sixteen disks (sixteen CQs per core) is comparable. Link: https://lore.kernel.org/r/1590568495-101621-3-git-send-email-yaminf@mellanox.com Signed-off-by: Yamin Friedman <yaminf@mellanox.com> Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
2819 lines
74 KiB
C
2819 lines
74 KiB
C
/*
|
|
* Copyright (c) 2004 Topspin Communications. All rights reserved.
|
|
* Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
|
|
*
|
|
* This software is available to you under a choice of one of two
|
|
* licenses. You may choose to be licensed under the terms of the GNU
|
|
* General Public License (GPL) Version 2, available from the file
|
|
* COPYING in the main directory of this source tree, or the
|
|
* OpenIB.org BSD license below:
|
|
*
|
|
* Redistribution and use in source and binary forms, with or
|
|
* without modification, are permitted provided that the following
|
|
* conditions are met:
|
|
*
|
|
* - Redistributions of source code must retain the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer.
|
|
*
|
|
* - Redistributions in binary form must reproduce the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer in the documentation and/or other materials
|
|
* provided with the distribution.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
|
|
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
|
|
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
|
|
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
|
|
* SOFTWARE.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/init.h>
|
|
#include <linux/netdevice.h>
|
|
#include <net/net_namespace.h>
|
|
#include <linux/security.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/hashtable.h>
|
|
#include <rdma/rdma_netlink.h>
|
|
#include <rdma/ib_addr.h>
|
|
#include <rdma/ib_cache.h>
|
|
#include <rdma/rdma_counter.h>
|
|
|
|
#include "core_priv.h"
|
|
#include "restrack.h"
|
|
|
|
MODULE_AUTHOR("Roland Dreier");
|
|
MODULE_DESCRIPTION("core kernel InfiniBand API");
|
|
MODULE_LICENSE("Dual BSD/GPL");
|
|
|
|
struct workqueue_struct *ib_comp_wq;
|
|
struct workqueue_struct *ib_comp_unbound_wq;
|
|
struct workqueue_struct *ib_wq;
|
|
EXPORT_SYMBOL_GPL(ib_wq);
|
|
|
|
/*
|
|
* Each of the three rwsem locks (devices, clients, client_data) protects the
|
|
* xarray of the same name. Specifically it allows the caller to assert that
|
|
* the MARK will/will not be changing under the lock, and for devices and
|
|
* clients, that the value in the xarray is still a valid pointer. Change of
|
|
* the MARK is linked to the object state, so holding the lock and testing the
|
|
* MARK also asserts that the contained object is in a certain state.
|
|
*
|
|
* This is used to build a two stage register/unregister flow where objects
|
|
* can continue to be in the xarray even though they are still in progress to
|
|
* register/unregister.
|
|
*
|
|
* The xarray itself provides additional locking, and restartable iteration,
|
|
* which is also relied on.
|
|
*
|
|
* Locks should not be nested, with the exception of client_data, which is
|
|
* allowed to nest under the read side of the other two locks.
|
|
*
|
|
* The devices_rwsem also protects the device name list, any change or
|
|
* assignment of device name must also hold the write side to guarantee unique
|
|
* names.
|
|
*/
|
|
|
|
/*
|
|
* devices contains devices that have had their names assigned. The
|
|
* devices may not be registered. Users that care about the registration
|
|
* status need to call ib_device_try_get() on the device to ensure it is
|
|
* registered, and keep it registered, for the required duration.
|
|
*
|
|
*/
|
|
static DEFINE_XARRAY_FLAGS(devices, XA_FLAGS_ALLOC);
|
|
static DECLARE_RWSEM(devices_rwsem);
|
|
#define DEVICE_REGISTERED XA_MARK_1
|
|
|
|
static u32 highest_client_id;
|
|
#define CLIENT_REGISTERED XA_MARK_1
|
|
static DEFINE_XARRAY_FLAGS(clients, XA_FLAGS_ALLOC);
|
|
static DECLARE_RWSEM(clients_rwsem);
|
|
|
|
static void ib_client_put(struct ib_client *client)
|
|
{
|
|
if (refcount_dec_and_test(&client->uses))
|
|
complete(&client->uses_zero);
|
|
}
|
|
|
|
/*
|
|
* If client_data is registered then the corresponding client must also still
|
|
* be registered.
|
|
*/
|
|
#define CLIENT_DATA_REGISTERED XA_MARK_1
|
|
|
|
unsigned int rdma_dev_net_id;
|
|
|
|
/*
|
|
* A list of net namespaces is maintained in an xarray. This is necessary
|
|
* because we can't get the locking right using the existing net ns list. We
|
|
* would require a init_net callback after the list is updated.
|
|
*/
|
|
static DEFINE_XARRAY_FLAGS(rdma_nets, XA_FLAGS_ALLOC);
|
|
/*
|
|
* rwsem to protect accessing the rdma_nets xarray entries.
|
|
*/
|
|
static DECLARE_RWSEM(rdma_nets_rwsem);
|
|
|
|
bool ib_devices_shared_netns = true;
|
|
module_param_named(netns_mode, ib_devices_shared_netns, bool, 0444);
|
|
MODULE_PARM_DESC(netns_mode,
|
|
"Share device among net namespaces; default=1 (shared)");
|
|
/**
|
|
* rdma_dev_access_netns() - Return whether an rdma device can be accessed
|
|
* from a specified net namespace or not.
|
|
* @dev: Pointer to rdma device which needs to be checked
|
|
* @net: Pointer to net namesapce for which access to be checked
|
|
*
|
|
* When the rdma device is in shared mode, it ignores the net namespace.
|
|
* When the rdma device is exclusive to a net namespace, rdma device net
|
|
* namespace is checked against the specified one.
|
|
*/
|
|
bool rdma_dev_access_netns(const struct ib_device *dev, const struct net *net)
|
|
{
|
|
return (ib_devices_shared_netns ||
|
|
net_eq(read_pnet(&dev->coredev.rdma_net), net));
|
|
}
|
|
EXPORT_SYMBOL(rdma_dev_access_netns);
|
|
|
|
/*
|
|
* xarray has this behavior where it won't iterate over NULL values stored in
|
|
* allocated arrays. So we need our own iterator to see all values stored in
|
|
* the array. This does the same thing as xa_for_each except that it also
|
|
* returns NULL valued entries if the array is allocating. Simplified to only
|
|
* work on simple xarrays.
|
|
*/
|
|
static void *xan_find_marked(struct xarray *xa, unsigned long *indexp,
|
|
xa_mark_t filter)
|
|
{
|
|
XA_STATE(xas, xa, *indexp);
|
|
void *entry;
|
|
|
|
rcu_read_lock();
|
|
do {
|
|
entry = xas_find_marked(&xas, ULONG_MAX, filter);
|
|
if (xa_is_zero(entry))
|
|
break;
|
|
} while (xas_retry(&xas, entry));
|
|
rcu_read_unlock();
|
|
|
|
if (entry) {
|
|
*indexp = xas.xa_index;
|
|
if (xa_is_zero(entry))
|
|
return NULL;
|
|
return entry;
|
|
}
|
|
return XA_ERROR(-ENOENT);
|
|
}
|
|
#define xan_for_each_marked(xa, index, entry, filter) \
|
|
for (index = 0, entry = xan_find_marked(xa, &(index), filter); \
|
|
!xa_is_err(entry); \
|
|
(index)++, entry = xan_find_marked(xa, &(index), filter))
|
|
|
|
/* RCU hash table mapping netdevice pointers to struct ib_port_data */
|
|
static DEFINE_SPINLOCK(ndev_hash_lock);
|
|
static DECLARE_HASHTABLE(ndev_hash, 5);
|
|
|
|
static void free_netdevs(struct ib_device *ib_dev);
|
|
static void ib_unregister_work(struct work_struct *work);
|
|
static void __ib_unregister_device(struct ib_device *device);
|
|
static int ib_security_change(struct notifier_block *nb, unsigned long event,
|
|
void *lsm_data);
|
|
static void ib_policy_change_task(struct work_struct *work);
|
|
static DECLARE_WORK(ib_policy_change_work, ib_policy_change_task);
|
|
|
|
static void __ibdev_printk(const char *level, const struct ib_device *ibdev,
|
|
struct va_format *vaf)
|
|
{
|
|
if (ibdev && ibdev->dev.parent)
|
|
dev_printk_emit(level[1] - '0',
|
|
ibdev->dev.parent,
|
|
"%s %s %s: %pV",
|
|
dev_driver_string(ibdev->dev.parent),
|
|
dev_name(ibdev->dev.parent),
|
|
dev_name(&ibdev->dev),
|
|
vaf);
|
|
else if (ibdev)
|
|
printk("%s%s: %pV",
|
|
level, dev_name(&ibdev->dev), vaf);
|
|
else
|
|
printk("%s(NULL ib_device): %pV", level, vaf);
|
|
}
|
|
|
|
void ibdev_printk(const char *level, const struct ib_device *ibdev,
|
|
const char *format, ...)
|
|
{
|
|
struct va_format vaf;
|
|
va_list args;
|
|
|
|
va_start(args, format);
|
|
|
|
vaf.fmt = format;
|
|
vaf.va = &args;
|
|
|
|
__ibdev_printk(level, ibdev, &vaf);
|
|
|
|
va_end(args);
|
|
}
|
|
EXPORT_SYMBOL(ibdev_printk);
|
|
|
|
#define define_ibdev_printk_level(func, level) \
|
|
void func(const struct ib_device *ibdev, const char *fmt, ...) \
|
|
{ \
|
|
struct va_format vaf; \
|
|
va_list args; \
|
|
\
|
|
va_start(args, fmt); \
|
|
\
|
|
vaf.fmt = fmt; \
|
|
vaf.va = &args; \
|
|
\
|
|
__ibdev_printk(level, ibdev, &vaf); \
|
|
\
|
|
va_end(args); \
|
|
} \
|
|
EXPORT_SYMBOL(func);
|
|
|
|
define_ibdev_printk_level(ibdev_emerg, KERN_EMERG);
|
|
define_ibdev_printk_level(ibdev_alert, KERN_ALERT);
|
|
define_ibdev_printk_level(ibdev_crit, KERN_CRIT);
|
|
define_ibdev_printk_level(ibdev_err, KERN_ERR);
|
|
define_ibdev_printk_level(ibdev_warn, KERN_WARNING);
|
|
define_ibdev_printk_level(ibdev_notice, KERN_NOTICE);
|
|
define_ibdev_printk_level(ibdev_info, KERN_INFO);
|
|
|
|
static struct notifier_block ibdev_lsm_nb = {
|
|
.notifier_call = ib_security_change,
|
|
};
|
|
|
|
static int rdma_dev_change_netns(struct ib_device *device, struct net *cur_net,
|
|
struct net *net);
|
|
|
|
/* Pointer to the RCU head at the start of the ib_port_data array */
|
|
struct ib_port_data_rcu {
|
|
struct rcu_head rcu_head;
|
|
struct ib_port_data pdata[];
|
|
};
|
|
|
|
static void ib_device_check_mandatory(struct ib_device *device)
|
|
{
|
|
#define IB_MANDATORY_FUNC(x) { offsetof(struct ib_device_ops, x), #x }
|
|
static const struct {
|
|
size_t offset;
|
|
char *name;
|
|
} mandatory_table[] = {
|
|
IB_MANDATORY_FUNC(query_device),
|
|
IB_MANDATORY_FUNC(query_port),
|
|
IB_MANDATORY_FUNC(query_pkey),
|
|
IB_MANDATORY_FUNC(alloc_pd),
|
|
IB_MANDATORY_FUNC(dealloc_pd),
|
|
IB_MANDATORY_FUNC(create_qp),
|
|
IB_MANDATORY_FUNC(modify_qp),
|
|
IB_MANDATORY_FUNC(destroy_qp),
|
|
IB_MANDATORY_FUNC(post_send),
|
|
IB_MANDATORY_FUNC(post_recv),
|
|
IB_MANDATORY_FUNC(create_cq),
|
|
IB_MANDATORY_FUNC(destroy_cq),
|
|
IB_MANDATORY_FUNC(poll_cq),
|
|
IB_MANDATORY_FUNC(req_notify_cq),
|
|
IB_MANDATORY_FUNC(get_dma_mr),
|
|
IB_MANDATORY_FUNC(dereg_mr),
|
|
IB_MANDATORY_FUNC(get_port_immutable)
|
|
};
|
|
int i;
|
|
|
|
device->kverbs_provider = true;
|
|
for (i = 0; i < ARRAY_SIZE(mandatory_table); ++i) {
|
|
if (!*(void **) ((void *) &device->ops +
|
|
mandatory_table[i].offset)) {
|
|
device->kverbs_provider = false;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Caller must perform ib_device_put() to return the device reference count
|
|
* when ib_device_get_by_index() returns valid device pointer.
|
|
*/
|
|
struct ib_device *ib_device_get_by_index(const struct net *net, u32 index)
|
|
{
|
|
struct ib_device *device;
|
|
|
|
down_read(&devices_rwsem);
|
|
device = xa_load(&devices, index);
|
|
if (device) {
|
|
if (!rdma_dev_access_netns(device, net)) {
|
|
device = NULL;
|
|
goto out;
|
|
}
|
|
|
|
if (!ib_device_try_get(device))
|
|
device = NULL;
|
|
}
|
|
out:
|
|
up_read(&devices_rwsem);
|
|
return device;
|
|
}
|
|
|
|
/**
|
|
* ib_device_put - Release IB device reference
|
|
* @device: device whose reference to be released
|
|
*
|
|
* ib_device_put() releases reference to the IB device to allow it to be
|
|
* unregistered and eventually free.
|
|
*/
|
|
void ib_device_put(struct ib_device *device)
|
|
{
|
|
if (refcount_dec_and_test(&device->refcount))
|
|
complete(&device->unreg_completion);
|
|
}
|
|
EXPORT_SYMBOL(ib_device_put);
|
|
|
|
static struct ib_device *__ib_device_get_by_name(const char *name)
|
|
{
|
|
struct ib_device *device;
|
|
unsigned long index;
|
|
|
|
xa_for_each (&devices, index, device)
|
|
if (!strcmp(name, dev_name(&device->dev)))
|
|
return device;
|
|
|
|
return NULL;
|
|
}
|
|
|
|
/**
|
|
* ib_device_get_by_name - Find an IB device by name
|
|
* @name: The name to look for
|
|
* @driver_id: The driver ID that must match (RDMA_DRIVER_UNKNOWN matches all)
|
|
*
|
|
* Find and hold an ib_device by its name. The caller must call
|
|
* ib_device_put() on the returned pointer.
|
|
*/
|
|
struct ib_device *ib_device_get_by_name(const char *name,
|
|
enum rdma_driver_id driver_id)
|
|
{
|
|
struct ib_device *device;
|
|
|
|
down_read(&devices_rwsem);
|
|
device = __ib_device_get_by_name(name);
|
|
if (device && driver_id != RDMA_DRIVER_UNKNOWN &&
|
|
device->ops.driver_id != driver_id)
|
|
device = NULL;
|
|
|
|
if (device) {
|
|
if (!ib_device_try_get(device))
|
|
device = NULL;
|
|
}
|
|
up_read(&devices_rwsem);
|
|
return device;
|
|
}
|
|
EXPORT_SYMBOL(ib_device_get_by_name);
|
|
|
|
static int rename_compat_devs(struct ib_device *device)
|
|
{
|
|
struct ib_core_device *cdev;
|
|
unsigned long index;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&device->compat_devs_mutex);
|
|
xa_for_each (&device->compat_devs, index, cdev) {
|
|
ret = device_rename(&cdev->dev, dev_name(&device->dev));
|
|
if (ret) {
|
|
dev_warn(&cdev->dev,
|
|
"Fail to rename compatdev to new name %s\n",
|
|
dev_name(&device->dev));
|
|
break;
|
|
}
|
|
}
|
|
mutex_unlock(&device->compat_devs_mutex);
|
|
return ret;
|
|
}
|
|
|
|
int ib_device_rename(struct ib_device *ibdev, const char *name)
|
|
{
|
|
unsigned long index;
|
|
void *client_data;
|
|
int ret;
|
|
|
|
down_write(&devices_rwsem);
|
|
if (!strcmp(name, dev_name(&ibdev->dev))) {
|
|
up_write(&devices_rwsem);
|
|
return 0;
|
|
}
|
|
|
|
if (__ib_device_get_by_name(name)) {
|
|
up_write(&devices_rwsem);
|
|
return -EEXIST;
|
|
}
|
|
|
|
ret = device_rename(&ibdev->dev, name);
|
|
if (ret) {
|
|
up_write(&devices_rwsem);
|
|
return ret;
|
|
}
|
|
|
|
strlcpy(ibdev->name, name, IB_DEVICE_NAME_MAX);
|
|
ret = rename_compat_devs(ibdev);
|
|
|
|
downgrade_write(&devices_rwsem);
|
|
down_read(&ibdev->client_data_rwsem);
|
|
xan_for_each_marked(&ibdev->client_data, index, client_data,
|
|
CLIENT_DATA_REGISTERED) {
|
|
struct ib_client *client = xa_load(&clients, index);
|
|
|
|
if (!client || !client->rename)
|
|
continue;
|
|
|
|
client->rename(ibdev, client_data);
|
|
}
|
|
up_read(&ibdev->client_data_rwsem);
|
|
up_read(&devices_rwsem);
|
|
return 0;
|
|
}
|
|
|
|
int ib_device_set_dim(struct ib_device *ibdev, u8 use_dim)
|
|
{
|
|
if (use_dim > 1)
|
|
return -EINVAL;
|
|
ibdev->use_cq_dim = use_dim;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int alloc_name(struct ib_device *ibdev, const char *name)
|
|
{
|
|
struct ib_device *device;
|
|
unsigned long index;
|
|
struct ida inuse;
|
|
int rc;
|
|
int i;
|
|
|
|
lockdep_assert_held_write(&devices_rwsem);
|
|
ida_init(&inuse);
|
|
xa_for_each (&devices, index, device) {
|
|
char buf[IB_DEVICE_NAME_MAX];
|
|
|
|
if (sscanf(dev_name(&device->dev), name, &i) != 1)
|
|
continue;
|
|
if (i < 0 || i >= INT_MAX)
|
|
continue;
|
|
snprintf(buf, sizeof buf, name, i);
|
|
if (strcmp(buf, dev_name(&device->dev)) != 0)
|
|
continue;
|
|
|
|
rc = ida_alloc_range(&inuse, i, i, GFP_KERNEL);
|
|
if (rc < 0)
|
|
goto out;
|
|
}
|
|
|
|
rc = ida_alloc(&inuse, GFP_KERNEL);
|
|
if (rc < 0)
|
|
goto out;
|
|
|
|
rc = dev_set_name(&ibdev->dev, name, rc);
|
|
out:
|
|
ida_destroy(&inuse);
|
|
return rc;
|
|
}
|
|
|
|
static void ib_device_release(struct device *device)
|
|
{
|
|
struct ib_device *dev = container_of(device, struct ib_device, dev);
|
|
|
|
free_netdevs(dev);
|
|
WARN_ON(refcount_read(&dev->refcount));
|
|
if (dev->port_data) {
|
|
ib_cache_release_one(dev);
|
|
ib_security_release_port_pkey_list(dev);
|
|
rdma_counter_release(dev);
|
|
kfree_rcu(container_of(dev->port_data, struct ib_port_data_rcu,
|
|
pdata[0]),
|
|
rcu_head);
|
|
}
|
|
|
|
mutex_destroy(&dev->unregistration_lock);
|
|
mutex_destroy(&dev->compat_devs_mutex);
|
|
|
|
xa_destroy(&dev->compat_devs);
|
|
xa_destroy(&dev->client_data);
|
|
kfree_rcu(dev, rcu_head);
|
|
}
|
|
|
|
static int ib_device_uevent(struct device *device,
|
|
struct kobj_uevent_env *env)
|
|
{
|
|
if (add_uevent_var(env, "NAME=%s", dev_name(device)))
|
|
return -ENOMEM;
|
|
|
|
/*
|
|
* It would be nice to pass the node GUID with the event...
|
|
*/
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const void *net_namespace(struct device *d)
|
|
{
|
|
struct ib_core_device *coredev =
|
|
container_of(d, struct ib_core_device, dev);
|
|
|
|
return read_pnet(&coredev->rdma_net);
|
|
}
|
|
|
|
static struct class ib_class = {
|
|
.name = "infiniband",
|
|
.dev_release = ib_device_release,
|
|
.dev_uevent = ib_device_uevent,
|
|
.ns_type = &net_ns_type_operations,
|
|
.namespace = net_namespace,
|
|
};
|
|
|
|
static void rdma_init_coredev(struct ib_core_device *coredev,
|
|
struct ib_device *dev, struct net *net)
|
|
{
|
|
/* This BUILD_BUG_ON is intended to catch layout change
|
|
* of union of ib_core_device and device.
|
|
* dev must be the first element as ib_core and providers
|
|
* driver uses it. Adding anything in ib_core_device before
|
|
* device will break this assumption.
|
|
*/
|
|
BUILD_BUG_ON(offsetof(struct ib_device, coredev.dev) !=
|
|
offsetof(struct ib_device, dev));
|
|
|
|
coredev->dev.class = &ib_class;
|
|
coredev->dev.groups = dev->groups;
|
|
device_initialize(&coredev->dev);
|
|
coredev->owner = dev;
|
|
INIT_LIST_HEAD(&coredev->port_list);
|
|
write_pnet(&coredev->rdma_net, net);
|
|
}
|
|
|
|
/**
|
|
* _ib_alloc_device - allocate an IB device struct
|
|
* @size:size of structure to allocate
|
|
*
|
|
* Low-level drivers should use ib_alloc_device() to allocate &struct
|
|
* ib_device. @size is the size of the structure to be allocated,
|
|
* including any private data used by the low-level driver.
|
|
* ib_dealloc_device() must be used to free structures allocated with
|
|
* ib_alloc_device().
|
|
*/
|
|
struct ib_device *_ib_alloc_device(size_t size)
|
|
{
|
|
struct ib_device *device;
|
|
|
|
if (WARN_ON(size < sizeof(struct ib_device)))
|
|
return NULL;
|
|
|
|
device = kzalloc(size, GFP_KERNEL);
|
|
if (!device)
|
|
return NULL;
|
|
|
|
if (rdma_restrack_init(device)) {
|
|
kfree(device);
|
|
return NULL;
|
|
}
|
|
|
|
device->groups[0] = &ib_dev_attr_group;
|
|
rdma_init_coredev(&device->coredev, device, &init_net);
|
|
|
|
INIT_LIST_HEAD(&device->event_handler_list);
|
|
spin_lock_init(&device->qp_open_list_lock);
|
|
init_rwsem(&device->event_handler_rwsem);
|
|
mutex_init(&device->unregistration_lock);
|
|
/*
|
|
* client_data needs to be alloc because we don't want our mark to be
|
|
* destroyed if the user stores NULL in the client data.
|
|
*/
|
|
xa_init_flags(&device->client_data, XA_FLAGS_ALLOC);
|
|
init_rwsem(&device->client_data_rwsem);
|
|
xa_init_flags(&device->compat_devs, XA_FLAGS_ALLOC);
|
|
mutex_init(&device->compat_devs_mutex);
|
|
init_completion(&device->unreg_completion);
|
|
INIT_WORK(&device->unregistration_work, ib_unregister_work);
|
|
|
|
return device;
|
|
}
|
|
EXPORT_SYMBOL(_ib_alloc_device);
|
|
|
|
/**
|
|
* ib_dealloc_device - free an IB device struct
|
|
* @device:structure to free
|
|
*
|
|
* Free a structure allocated with ib_alloc_device().
|
|
*/
|
|
void ib_dealloc_device(struct ib_device *device)
|
|
{
|
|
if (device->ops.dealloc_driver)
|
|
device->ops.dealloc_driver(device);
|
|
|
|
/*
|
|
* ib_unregister_driver() requires all devices to remain in the xarray
|
|
* while their ops are callable. The last op we call is dealloc_driver
|
|
* above. This is needed to create a fence on op callbacks prior to
|
|
* allowing the driver module to unload.
|
|
*/
|
|
down_write(&devices_rwsem);
|
|
if (xa_load(&devices, device->index) == device)
|
|
xa_erase(&devices, device->index);
|
|
up_write(&devices_rwsem);
|
|
|
|
/* Expedite releasing netdev references */
|
|
free_netdevs(device);
|
|
|
|
WARN_ON(!xa_empty(&device->compat_devs));
|
|
WARN_ON(!xa_empty(&device->client_data));
|
|
WARN_ON(refcount_read(&device->refcount));
|
|
rdma_restrack_clean(device);
|
|
/* Balances with device_initialize */
|
|
put_device(&device->dev);
|
|
}
|
|
EXPORT_SYMBOL(ib_dealloc_device);
|
|
|
|
/*
|
|
* add_client_context() and remove_client_context() must be safe against
|
|
* parallel calls on the same device - registration/unregistration of both the
|
|
* device and client can be occurring in parallel.
|
|
*
|
|
* The routines need to be a fence, any caller must not return until the add
|
|
* or remove is fully completed.
|
|
*/
|
|
static int add_client_context(struct ib_device *device,
|
|
struct ib_client *client)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (!device->kverbs_provider && !client->no_kverbs_req)
|
|
return 0;
|
|
|
|
down_write(&device->client_data_rwsem);
|
|
/*
|
|
* So long as the client is registered hold both the client and device
|
|
* unregistration locks.
|
|
*/
|
|
if (!refcount_inc_not_zero(&client->uses))
|
|
goto out_unlock;
|
|
refcount_inc(&device->refcount);
|
|
|
|
/*
|
|
* Another caller to add_client_context got here first and has already
|
|
* completely initialized context.
|
|
*/
|
|
if (xa_get_mark(&device->client_data, client->client_id,
|
|
CLIENT_DATA_REGISTERED))
|
|
goto out;
|
|
|
|
ret = xa_err(xa_store(&device->client_data, client->client_id, NULL,
|
|
GFP_KERNEL));
|
|
if (ret)
|
|
goto out;
|
|
downgrade_write(&device->client_data_rwsem);
|
|
if (client->add) {
|
|
if (client->add(device)) {
|
|
/*
|
|
* If a client fails to add then the error code is
|
|
* ignored, but we won't call any more ops on this
|
|
* client.
|
|
*/
|
|
xa_erase(&device->client_data, client->client_id);
|
|
up_read(&device->client_data_rwsem);
|
|
ib_device_put(device);
|
|
ib_client_put(client);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/* Readers shall not see a client until add has been completed */
|
|
xa_set_mark(&device->client_data, client->client_id,
|
|
CLIENT_DATA_REGISTERED);
|
|
up_read(&device->client_data_rwsem);
|
|
return 0;
|
|
|
|
out:
|
|
ib_device_put(device);
|
|
ib_client_put(client);
|
|
out_unlock:
|
|
up_write(&device->client_data_rwsem);
|
|
return ret;
|
|
}
|
|
|
|
static void remove_client_context(struct ib_device *device,
|
|
unsigned int client_id)
|
|
{
|
|
struct ib_client *client;
|
|
void *client_data;
|
|
|
|
down_write(&device->client_data_rwsem);
|
|
if (!xa_get_mark(&device->client_data, client_id,
|
|
CLIENT_DATA_REGISTERED)) {
|
|
up_write(&device->client_data_rwsem);
|
|
return;
|
|
}
|
|
client_data = xa_load(&device->client_data, client_id);
|
|
xa_clear_mark(&device->client_data, client_id, CLIENT_DATA_REGISTERED);
|
|
client = xa_load(&clients, client_id);
|
|
up_write(&device->client_data_rwsem);
|
|
|
|
/*
|
|
* Notice we cannot be holding any exclusive locks when calling the
|
|
* remove callback as the remove callback can recurse back into any
|
|
* public functions in this module and thus try for any locks those
|
|
* functions take.
|
|
*
|
|
* For this reason clients and drivers should not call the
|
|
* unregistration functions will holdling any locks.
|
|
*/
|
|
if (client->remove)
|
|
client->remove(device, client_data);
|
|
|
|
xa_erase(&device->client_data, client_id);
|
|
ib_device_put(device);
|
|
ib_client_put(client);
|
|
}
|
|
|
|
static int alloc_port_data(struct ib_device *device)
|
|
{
|
|
struct ib_port_data_rcu *pdata_rcu;
|
|
unsigned int port;
|
|
|
|
if (device->port_data)
|
|
return 0;
|
|
|
|
/* This can only be called once the physical port range is defined */
|
|
if (WARN_ON(!device->phys_port_cnt))
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* device->port_data is indexed directly by the port number to make
|
|
* access to this data as efficient as possible.
|
|
*
|
|
* Therefore port_data is declared as a 1 based array with potential
|
|
* empty slots at the beginning.
|
|
*/
|
|
pdata_rcu = kzalloc(struct_size(pdata_rcu, pdata,
|
|
rdma_end_port(device) + 1),
|
|
GFP_KERNEL);
|
|
if (!pdata_rcu)
|
|
return -ENOMEM;
|
|
/*
|
|
* The rcu_head is put in front of the port data array and the stored
|
|
* pointer is adjusted since we never need to see that member until
|
|
* kfree_rcu.
|
|
*/
|
|
device->port_data = pdata_rcu->pdata;
|
|
|
|
rdma_for_each_port (device, port) {
|
|
struct ib_port_data *pdata = &device->port_data[port];
|
|
|
|
pdata->ib_dev = device;
|
|
spin_lock_init(&pdata->pkey_list_lock);
|
|
INIT_LIST_HEAD(&pdata->pkey_list);
|
|
spin_lock_init(&pdata->netdev_lock);
|
|
INIT_HLIST_NODE(&pdata->ndev_hash_link);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int verify_immutable(const struct ib_device *dev, u8 port)
|
|
{
|
|
return WARN_ON(!rdma_cap_ib_mad(dev, port) &&
|
|
rdma_max_mad_size(dev, port) != 0);
|
|
}
|
|
|
|
static int setup_port_data(struct ib_device *device)
|
|
{
|
|
unsigned int port;
|
|
int ret;
|
|
|
|
ret = alloc_port_data(device);
|
|
if (ret)
|
|
return ret;
|
|
|
|
rdma_for_each_port (device, port) {
|
|
struct ib_port_data *pdata = &device->port_data[port];
|
|
|
|
ret = device->ops.get_port_immutable(device, port,
|
|
&pdata->immutable);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (verify_immutable(device, port))
|
|
return -EINVAL;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
void ib_get_device_fw_str(struct ib_device *dev, char *str)
|
|
{
|
|
if (dev->ops.get_dev_fw_str)
|
|
dev->ops.get_dev_fw_str(dev, str);
|
|
else
|
|
str[0] = '\0';
|
|
}
|
|
EXPORT_SYMBOL(ib_get_device_fw_str);
|
|
|
|
static void ib_policy_change_task(struct work_struct *work)
|
|
{
|
|
struct ib_device *dev;
|
|
unsigned long index;
|
|
|
|
down_read(&devices_rwsem);
|
|
xa_for_each_marked (&devices, index, dev, DEVICE_REGISTERED) {
|
|
unsigned int i;
|
|
|
|
rdma_for_each_port (dev, i) {
|
|
u64 sp;
|
|
int ret = ib_get_cached_subnet_prefix(dev,
|
|
i,
|
|
&sp);
|
|
|
|
WARN_ONCE(ret,
|
|
"ib_get_cached_subnet_prefix err: %d, this should never happen here\n",
|
|
ret);
|
|
if (!ret)
|
|
ib_security_cache_change(dev, i, sp);
|
|
}
|
|
}
|
|
up_read(&devices_rwsem);
|
|
}
|
|
|
|
static int ib_security_change(struct notifier_block *nb, unsigned long event,
|
|
void *lsm_data)
|
|
{
|
|
if (event != LSM_POLICY_CHANGE)
|
|
return NOTIFY_DONE;
|
|
|
|
schedule_work(&ib_policy_change_work);
|
|
ib_mad_agent_security_change();
|
|
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
static void compatdev_release(struct device *dev)
|
|
{
|
|
struct ib_core_device *cdev =
|
|
container_of(dev, struct ib_core_device, dev);
|
|
|
|
kfree(cdev);
|
|
}
|
|
|
|
static int add_one_compat_dev(struct ib_device *device,
|
|
struct rdma_dev_net *rnet)
|
|
{
|
|
struct ib_core_device *cdev;
|
|
int ret;
|
|
|
|
lockdep_assert_held(&rdma_nets_rwsem);
|
|
if (!ib_devices_shared_netns)
|
|
return 0;
|
|
|
|
/*
|
|
* Create and add compat device in all namespaces other than where it
|
|
* is currently bound to.
|
|
*/
|
|
if (net_eq(read_pnet(&rnet->net),
|
|
read_pnet(&device->coredev.rdma_net)))
|
|
return 0;
|
|
|
|
/*
|
|
* The first of init_net() or ib_register_device() to take the
|
|
* compat_devs_mutex wins and gets to add the device. Others will wait
|
|
* for completion here.
|
|
*/
|
|
mutex_lock(&device->compat_devs_mutex);
|
|
cdev = xa_load(&device->compat_devs, rnet->id);
|
|
if (cdev) {
|
|
ret = 0;
|
|
goto done;
|
|
}
|
|
ret = xa_reserve(&device->compat_devs, rnet->id, GFP_KERNEL);
|
|
if (ret)
|
|
goto done;
|
|
|
|
cdev = kzalloc(sizeof(*cdev), GFP_KERNEL);
|
|
if (!cdev) {
|
|
ret = -ENOMEM;
|
|
goto cdev_err;
|
|
}
|
|
|
|
cdev->dev.parent = device->dev.parent;
|
|
rdma_init_coredev(cdev, device, read_pnet(&rnet->net));
|
|
cdev->dev.release = compatdev_release;
|
|
ret = dev_set_name(&cdev->dev, "%s", dev_name(&device->dev));
|
|
if (ret)
|
|
goto add_err;
|
|
|
|
ret = device_add(&cdev->dev);
|
|
if (ret)
|
|
goto add_err;
|
|
ret = ib_setup_port_attrs(cdev);
|
|
if (ret)
|
|
goto port_err;
|
|
|
|
ret = xa_err(xa_store(&device->compat_devs, rnet->id,
|
|
cdev, GFP_KERNEL));
|
|
if (ret)
|
|
goto insert_err;
|
|
|
|
mutex_unlock(&device->compat_devs_mutex);
|
|
return 0;
|
|
|
|
insert_err:
|
|
ib_free_port_attrs(cdev);
|
|
port_err:
|
|
device_del(&cdev->dev);
|
|
add_err:
|
|
put_device(&cdev->dev);
|
|
cdev_err:
|
|
xa_release(&device->compat_devs, rnet->id);
|
|
done:
|
|
mutex_unlock(&device->compat_devs_mutex);
|
|
return ret;
|
|
}
|
|
|
|
static void remove_one_compat_dev(struct ib_device *device, u32 id)
|
|
{
|
|
struct ib_core_device *cdev;
|
|
|
|
mutex_lock(&device->compat_devs_mutex);
|
|
cdev = xa_erase(&device->compat_devs, id);
|
|
mutex_unlock(&device->compat_devs_mutex);
|
|
if (cdev) {
|
|
ib_free_port_attrs(cdev);
|
|
device_del(&cdev->dev);
|
|
put_device(&cdev->dev);
|
|
}
|
|
}
|
|
|
|
static void remove_compat_devs(struct ib_device *device)
|
|
{
|
|
struct ib_core_device *cdev;
|
|
unsigned long index;
|
|
|
|
xa_for_each (&device->compat_devs, index, cdev)
|
|
remove_one_compat_dev(device, index);
|
|
}
|
|
|
|
static int add_compat_devs(struct ib_device *device)
|
|
{
|
|
struct rdma_dev_net *rnet;
|
|
unsigned long index;
|
|
int ret = 0;
|
|
|
|
lockdep_assert_held(&devices_rwsem);
|
|
|
|
down_read(&rdma_nets_rwsem);
|
|
xa_for_each (&rdma_nets, index, rnet) {
|
|
ret = add_one_compat_dev(device, rnet);
|
|
if (ret)
|
|
break;
|
|
}
|
|
up_read(&rdma_nets_rwsem);
|
|
return ret;
|
|
}
|
|
|
|
static void remove_all_compat_devs(void)
|
|
{
|
|
struct ib_compat_device *cdev;
|
|
struct ib_device *dev;
|
|
unsigned long index;
|
|
|
|
down_read(&devices_rwsem);
|
|
xa_for_each (&devices, index, dev) {
|
|
unsigned long c_index = 0;
|
|
|
|
/* Hold nets_rwsem so that any other thread modifying this
|
|
* system param can sync with this thread.
|
|
*/
|
|
down_read(&rdma_nets_rwsem);
|
|
xa_for_each (&dev->compat_devs, c_index, cdev)
|
|
remove_one_compat_dev(dev, c_index);
|
|
up_read(&rdma_nets_rwsem);
|
|
}
|
|
up_read(&devices_rwsem);
|
|
}
|
|
|
|
static int add_all_compat_devs(void)
|
|
{
|
|
struct rdma_dev_net *rnet;
|
|
struct ib_device *dev;
|
|
unsigned long index;
|
|
int ret = 0;
|
|
|
|
down_read(&devices_rwsem);
|
|
xa_for_each_marked (&devices, index, dev, DEVICE_REGISTERED) {
|
|
unsigned long net_index = 0;
|
|
|
|
/* Hold nets_rwsem so that any other thread modifying this
|
|
* system param can sync with this thread.
|
|
*/
|
|
down_read(&rdma_nets_rwsem);
|
|
xa_for_each (&rdma_nets, net_index, rnet) {
|
|
ret = add_one_compat_dev(dev, rnet);
|
|
if (ret)
|
|
break;
|
|
}
|
|
up_read(&rdma_nets_rwsem);
|
|
}
|
|
up_read(&devices_rwsem);
|
|
if (ret)
|
|
remove_all_compat_devs();
|
|
return ret;
|
|
}
|
|
|
|
int rdma_compatdev_set(u8 enable)
|
|
{
|
|
struct rdma_dev_net *rnet;
|
|
unsigned long index;
|
|
int ret = 0;
|
|
|
|
down_write(&rdma_nets_rwsem);
|
|
if (ib_devices_shared_netns == enable) {
|
|
up_write(&rdma_nets_rwsem);
|
|
return 0;
|
|
}
|
|
|
|
/* enable/disable of compat devices is not supported
|
|
* when more than default init_net exists.
|
|
*/
|
|
xa_for_each (&rdma_nets, index, rnet) {
|
|
ret++;
|
|
break;
|
|
}
|
|
if (!ret)
|
|
ib_devices_shared_netns = enable;
|
|
up_write(&rdma_nets_rwsem);
|
|
if (ret)
|
|
return -EBUSY;
|
|
|
|
if (enable)
|
|
ret = add_all_compat_devs();
|
|
else
|
|
remove_all_compat_devs();
|
|
return ret;
|
|
}
|
|
|
|
static void rdma_dev_exit_net(struct net *net)
|
|
{
|
|
struct rdma_dev_net *rnet = rdma_net_to_dev_net(net);
|
|
struct ib_device *dev;
|
|
unsigned long index;
|
|
int ret;
|
|
|
|
down_write(&rdma_nets_rwsem);
|
|
/*
|
|
* Prevent the ID from being re-used and hide the id from xa_for_each.
|
|
*/
|
|
ret = xa_err(xa_store(&rdma_nets, rnet->id, NULL, GFP_KERNEL));
|
|
WARN_ON(ret);
|
|
up_write(&rdma_nets_rwsem);
|
|
|
|
down_read(&devices_rwsem);
|
|
xa_for_each (&devices, index, dev) {
|
|
get_device(&dev->dev);
|
|
/*
|
|
* Release the devices_rwsem so that pontentially blocking
|
|
* device_del, doesn't hold the devices_rwsem for too long.
|
|
*/
|
|
up_read(&devices_rwsem);
|
|
|
|
remove_one_compat_dev(dev, rnet->id);
|
|
|
|
/*
|
|
* If the real device is in the NS then move it back to init.
|
|
*/
|
|
rdma_dev_change_netns(dev, net, &init_net);
|
|
|
|
put_device(&dev->dev);
|
|
down_read(&devices_rwsem);
|
|
}
|
|
up_read(&devices_rwsem);
|
|
|
|
rdma_nl_net_exit(rnet);
|
|
xa_erase(&rdma_nets, rnet->id);
|
|
}
|
|
|
|
static __net_init int rdma_dev_init_net(struct net *net)
|
|
{
|
|
struct rdma_dev_net *rnet = rdma_net_to_dev_net(net);
|
|
unsigned long index;
|
|
struct ib_device *dev;
|
|
int ret;
|
|
|
|
write_pnet(&rnet->net, net);
|
|
|
|
ret = rdma_nl_net_init(rnet);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* No need to create any compat devices in default init_net. */
|
|
if (net_eq(net, &init_net))
|
|
return 0;
|
|
|
|
ret = xa_alloc(&rdma_nets, &rnet->id, rnet, xa_limit_32b, GFP_KERNEL);
|
|
if (ret) {
|
|
rdma_nl_net_exit(rnet);
|
|
return ret;
|
|
}
|
|
|
|
down_read(&devices_rwsem);
|
|
xa_for_each_marked (&devices, index, dev, DEVICE_REGISTERED) {
|
|
/* Hold nets_rwsem so that netlink command cannot change
|
|
* system configuration for device sharing mode.
|
|
*/
|
|
down_read(&rdma_nets_rwsem);
|
|
ret = add_one_compat_dev(dev, rnet);
|
|
up_read(&rdma_nets_rwsem);
|
|
if (ret)
|
|
break;
|
|
}
|
|
up_read(&devices_rwsem);
|
|
|
|
if (ret)
|
|
rdma_dev_exit_net(net);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Assign the unique string device name and the unique device index. This is
|
|
* undone by ib_dealloc_device.
|
|
*/
|
|
static int assign_name(struct ib_device *device, const char *name)
|
|
{
|
|
static u32 last_id;
|
|
int ret;
|
|
|
|
down_write(&devices_rwsem);
|
|
/* Assign a unique name to the device */
|
|
if (strchr(name, '%'))
|
|
ret = alloc_name(device, name);
|
|
else
|
|
ret = dev_set_name(&device->dev, name);
|
|
if (ret)
|
|
goto out;
|
|
|
|
if (__ib_device_get_by_name(dev_name(&device->dev))) {
|
|
ret = -ENFILE;
|
|
goto out;
|
|
}
|
|
strlcpy(device->name, dev_name(&device->dev), IB_DEVICE_NAME_MAX);
|
|
|
|
ret = xa_alloc_cyclic(&devices, &device->index, device, xa_limit_31b,
|
|
&last_id, GFP_KERNEL);
|
|
if (ret > 0)
|
|
ret = 0;
|
|
|
|
out:
|
|
up_write(&devices_rwsem);
|
|
return ret;
|
|
}
|
|
|
|
static void setup_dma_device(struct ib_device *device)
|
|
{
|
|
struct device *parent = device->dev.parent;
|
|
|
|
WARN_ON_ONCE(device->dma_device);
|
|
if (device->dev.dma_ops) {
|
|
/*
|
|
* The caller provided custom DMA operations. Copy the
|
|
* DMA-related fields that are used by e.g. dma_alloc_coherent()
|
|
* into device->dev.
|
|
*/
|
|
device->dma_device = &device->dev;
|
|
if (!device->dev.dma_mask) {
|
|
if (parent)
|
|
device->dev.dma_mask = parent->dma_mask;
|
|
else
|
|
WARN_ON_ONCE(true);
|
|
}
|
|
if (!device->dev.coherent_dma_mask) {
|
|
if (parent)
|
|
device->dev.coherent_dma_mask =
|
|
parent->coherent_dma_mask;
|
|
else
|
|
WARN_ON_ONCE(true);
|
|
}
|
|
} else {
|
|
/*
|
|
* The caller did not provide custom DMA operations. Use the
|
|
* DMA mapping operations of the parent device.
|
|
*/
|
|
WARN_ON_ONCE(!parent);
|
|
device->dma_device = parent;
|
|
}
|
|
|
|
if (!device->dev.dma_parms) {
|
|
if (parent) {
|
|
/*
|
|
* The caller did not provide DMA parameters, so
|
|
* 'parent' probably represents a PCI device. The PCI
|
|
* core sets the maximum segment size to 64
|
|
* KB. Increase this parameter to 2 GB.
|
|
*/
|
|
device->dev.dma_parms = parent->dma_parms;
|
|
dma_set_max_seg_size(device->dma_device, SZ_2G);
|
|
} else {
|
|
WARN_ON_ONCE(true);
|
|
}
|
|
}
|
|
}
|
|
|
|
/*
|
|
* setup_device() allocates memory and sets up data that requires calling the
|
|
* device ops, this is the only reason these actions are not done during
|
|
* ib_alloc_device. It is undone by ib_dealloc_device().
|
|
*/
|
|
static int setup_device(struct ib_device *device)
|
|
{
|
|
struct ib_udata uhw = {.outlen = 0, .inlen = 0};
|
|
int ret;
|
|
|
|
setup_dma_device(device);
|
|
ib_device_check_mandatory(device);
|
|
|
|
ret = setup_port_data(device);
|
|
if (ret) {
|
|
dev_warn(&device->dev, "Couldn't create per-port data\n");
|
|
return ret;
|
|
}
|
|
|
|
memset(&device->attrs, 0, sizeof(device->attrs));
|
|
ret = device->ops.query_device(device, &device->attrs, &uhw);
|
|
if (ret) {
|
|
dev_warn(&device->dev,
|
|
"Couldn't query the device attributes\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void disable_device(struct ib_device *device)
|
|
{
|
|
u32 cid;
|
|
|
|
WARN_ON(!refcount_read(&device->refcount));
|
|
|
|
down_write(&devices_rwsem);
|
|
xa_clear_mark(&devices, device->index, DEVICE_REGISTERED);
|
|
up_write(&devices_rwsem);
|
|
|
|
/*
|
|
* Remove clients in LIFO order, see assign_client_id. This could be
|
|
* more efficient if xarray learns to reverse iterate. Since no new
|
|
* clients can be added to this ib_device past this point we only need
|
|
* the maximum possible client_id value here.
|
|
*/
|
|
down_read(&clients_rwsem);
|
|
cid = highest_client_id;
|
|
up_read(&clients_rwsem);
|
|
while (cid) {
|
|
cid--;
|
|
remove_client_context(device, cid);
|
|
}
|
|
|
|
/* Pairs with refcount_set in enable_device */
|
|
ib_device_put(device);
|
|
wait_for_completion(&device->unreg_completion);
|
|
|
|
/*
|
|
* compat devices must be removed after device refcount drops to zero.
|
|
* Otherwise init_net() may add more compatdevs after removing compat
|
|
* devices and before device is disabled.
|
|
*/
|
|
remove_compat_devs(device);
|
|
}
|
|
|
|
/*
|
|
* An enabled device is visible to all clients and to all the public facing
|
|
* APIs that return a device pointer. This always returns with a new get, even
|
|
* if it fails.
|
|
*/
|
|
static int enable_device_and_get(struct ib_device *device)
|
|
{
|
|
struct ib_client *client;
|
|
unsigned long index;
|
|
int ret = 0;
|
|
|
|
/*
|
|
* One ref belongs to the xa and the other belongs to this
|
|
* thread. This is needed to guard against parallel unregistration.
|
|
*/
|
|
refcount_set(&device->refcount, 2);
|
|
down_write(&devices_rwsem);
|
|
xa_set_mark(&devices, device->index, DEVICE_REGISTERED);
|
|
|
|
/*
|
|
* By using downgrade_write() we ensure that no other thread can clear
|
|
* DEVICE_REGISTERED while we are completing the client setup.
|
|
*/
|
|
downgrade_write(&devices_rwsem);
|
|
|
|
if (device->ops.enable_driver) {
|
|
ret = device->ops.enable_driver(device);
|
|
if (ret)
|
|
goto out;
|
|
}
|
|
|
|
down_read(&clients_rwsem);
|
|
xa_for_each_marked (&clients, index, client, CLIENT_REGISTERED) {
|
|
ret = add_client_context(device, client);
|
|
if (ret)
|
|
break;
|
|
}
|
|
up_read(&clients_rwsem);
|
|
if (!ret)
|
|
ret = add_compat_devs(device);
|
|
out:
|
|
up_read(&devices_rwsem);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* ib_register_device - Register an IB device with IB core
|
|
* @device: Device to register
|
|
* @name: unique string device name. This may include a '%' which will
|
|
* cause a unique index to be added to the passed device name.
|
|
*
|
|
* Low-level drivers use ib_register_device() to register their
|
|
* devices with the IB core. All registered clients will receive a
|
|
* callback for each device that is added. @device must be allocated
|
|
* with ib_alloc_device().
|
|
*
|
|
* If the driver uses ops.dealloc_driver and calls any ib_unregister_device()
|
|
* asynchronously then the device pointer may become freed as soon as this
|
|
* function returns.
|
|
*/
|
|
int ib_register_device(struct ib_device *device, const char *name)
|
|
{
|
|
int ret;
|
|
|
|
ret = assign_name(device, name);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = setup_device(device);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ib_cache_setup_one(device);
|
|
if (ret) {
|
|
dev_warn(&device->dev,
|
|
"Couldn't set up InfiniBand P_Key/GID cache\n");
|
|
return ret;
|
|
}
|
|
|
|
ib_device_register_rdmacg(device);
|
|
|
|
rdma_counter_init(device);
|
|
|
|
/*
|
|
* Ensure that ADD uevent is not fired because it
|
|
* is too early amd device is not initialized yet.
|
|
*/
|
|
dev_set_uevent_suppress(&device->dev, true);
|
|
ret = device_add(&device->dev);
|
|
if (ret)
|
|
goto cg_cleanup;
|
|
|
|
ret = ib_device_register_sysfs(device);
|
|
if (ret) {
|
|
dev_warn(&device->dev,
|
|
"Couldn't register device with driver model\n");
|
|
goto dev_cleanup;
|
|
}
|
|
|
|
ib_cq_pool_init(device);
|
|
ret = enable_device_and_get(device);
|
|
dev_set_uevent_suppress(&device->dev, false);
|
|
/* Mark for userspace that device is ready */
|
|
kobject_uevent(&device->dev.kobj, KOBJ_ADD);
|
|
if (ret) {
|
|
void (*dealloc_fn)(struct ib_device *);
|
|
|
|
/*
|
|
* If we hit this error flow then we don't want to
|
|
* automatically dealloc the device since the caller is
|
|
* expected to call ib_dealloc_device() after
|
|
* ib_register_device() fails. This is tricky due to the
|
|
* possibility for a parallel unregistration along with this
|
|
* error flow. Since we have a refcount here we know any
|
|
* parallel flow is stopped in disable_device and will see the
|
|
* NULL pointers, causing the responsibility to
|
|
* ib_dealloc_device() to revert back to this thread.
|
|
*/
|
|
dealloc_fn = device->ops.dealloc_driver;
|
|
device->ops.dealloc_driver = NULL;
|
|
ib_device_put(device);
|
|
__ib_unregister_device(device);
|
|
device->ops.dealloc_driver = dealloc_fn;
|
|
return ret;
|
|
}
|
|
ib_device_put(device);
|
|
|
|
return 0;
|
|
|
|
dev_cleanup:
|
|
device_del(&device->dev);
|
|
cg_cleanup:
|
|
dev_set_uevent_suppress(&device->dev, false);
|
|
ib_device_unregister_rdmacg(device);
|
|
ib_cache_cleanup_one(device);
|
|
return ret;
|
|
}
|
|
EXPORT_SYMBOL(ib_register_device);
|
|
|
|
/* Callers must hold a get on the device. */
|
|
static void __ib_unregister_device(struct ib_device *ib_dev)
|
|
{
|
|
/*
|
|
* We have a registration lock so that all the calls to unregister are
|
|
* fully fenced, once any unregister returns the device is truely
|
|
* unregistered even if multiple callers are unregistering it at the
|
|
* same time. This also interacts with the registration flow and
|
|
* provides sane semantics if register and unregister are racing.
|
|
*/
|
|
mutex_lock(&ib_dev->unregistration_lock);
|
|
if (!refcount_read(&ib_dev->refcount))
|
|
goto out;
|
|
|
|
disable_device(ib_dev);
|
|
ib_cq_pool_destroy(ib_dev);
|
|
|
|
/* Expedite removing unregistered pointers from the hash table */
|
|
free_netdevs(ib_dev);
|
|
|
|
ib_device_unregister_sysfs(ib_dev);
|
|
device_del(&ib_dev->dev);
|
|
ib_device_unregister_rdmacg(ib_dev);
|
|
ib_cache_cleanup_one(ib_dev);
|
|
|
|
/*
|
|
* Drivers using the new flow may not call ib_dealloc_device except
|
|
* in error unwind prior to registration success.
|
|
*/
|
|
if (ib_dev->ops.dealloc_driver) {
|
|
WARN_ON(kref_read(&ib_dev->dev.kobj.kref) <= 1);
|
|
ib_dealloc_device(ib_dev);
|
|
}
|
|
out:
|
|
mutex_unlock(&ib_dev->unregistration_lock);
|
|
}
|
|
|
|
/**
|
|
* ib_unregister_device - Unregister an IB device
|
|
* @ib_dev: The device to unregister
|
|
*
|
|
* Unregister an IB device. All clients will receive a remove callback.
|
|
*
|
|
* Callers should call this routine only once, and protect against races with
|
|
* registration. Typically it should only be called as part of a remove
|
|
* callback in an implementation of driver core's struct device_driver and
|
|
* related.
|
|
*
|
|
* If ops.dealloc_driver is used then ib_dev will be freed upon return from
|
|
* this function.
|
|
*/
|
|
void ib_unregister_device(struct ib_device *ib_dev)
|
|
{
|
|
get_device(&ib_dev->dev);
|
|
__ib_unregister_device(ib_dev);
|
|
put_device(&ib_dev->dev);
|
|
}
|
|
EXPORT_SYMBOL(ib_unregister_device);
|
|
|
|
/**
|
|
* ib_unregister_device_and_put - Unregister a device while holding a 'get'
|
|
* @ib_dev: The device to unregister
|
|
*
|
|
* This is the same as ib_unregister_device(), except it includes an internal
|
|
* ib_device_put() that should match a 'get' obtained by the caller.
|
|
*
|
|
* It is safe to call this routine concurrently from multiple threads while
|
|
* holding the 'get'. When the function returns the device is fully
|
|
* unregistered.
|
|
*
|
|
* Drivers using this flow MUST use the driver_unregister callback to clean up
|
|
* their resources associated with the device and dealloc it.
|
|
*/
|
|
void ib_unregister_device_and_put(struct ib_device *ib_dev)
|
|
{
|
|
WARN_ON(!ib_dev->ops.dealloc_driver);
|
|
get_device(&ib_dev->dev);
|
|
ib_device_put(ib_dev);
|
|
__ib_unregister_device(ib_dev);
|
|
put_device(&ib_dev->dev);
|
|
}
|
|
EXPORT_SYMBOL(ib_unregister_device_and_put);
|
|
|
|
/**
|
|
* ib_unregister_driver - Unregister all IB devices for a driver
|
|
* @driver_id: The driver to unregister
|
|
*
|
|
* This implements a fence for device unregistration. It only returns once all
|
|
* devices associated with the driver_id have fully completed their
|
|
* unregistration and returned from ib_unregister_device*().
|
|
*
|
|
* If device's are not yet unregistered it goes ahead and starts unregistering
|
|
* them.
|
|
*
|
|
* This does not block creation of new devices with the given driver_id, that
|
|
* is the responsibility of the caller.
|
|
*/
|
|
void ib_unregister_driver(enum rdma_driver_id driver_id)
|
|
{
|
|
struct ib_device *ib_dev;
|
|
unsigned long index;
|
|
|
|
down_read(&devices_rwsem);
|
|
xa_for_each (&devices, index, ib_dev) {
|
|
if (ib_dev->ops.driver_id != driver_id)
|
|
continue;
|
|
|
|
get_device(&ib_dev->dev);
|
|
up_read(&devices_rwsem);
|
|
|
|
WARN_ON(!ib_dev->ops.dealloc_driver);
|
|
__ib_unregister_device(ib_dev);
|
|
|
|
put_device(&ib_dev->dev);
|
|
down_read(&devices_rwsem);
|
|
}
|
|
up_read(&devices_rwsem);
|
|
}
|
|
EXPORT_SYMBOL(ib_unregister_driver);
|
|
|
|
static void ib_unregister_work(struct work_struct *work)
|
|
{
|
|
struct ib_device *ib_dev =
|
|
container_of(work, struct ib_device, unregistration_work);
|
|
|
|
__ib_unregister_device(ib_dev);
|
|
put_device(&ib_dev->dev);
|
|
}
|
|
|
|
/**
|
|
* ib_unregister_device_queued - Unregister a device using a work queue
|
|
* @ib_dev: The device to unregister
|
|
*
|
|
* This schedules an asynchronous unregistration using a WQ for the device. A
|
|
* driver should use this to avoid holding locks while doing unregistration,
|
|
* such as holding the RTNL lock.
|
|
*
|
|
* Drivers using this API must use ib_unregister_driver before module unload
|
|
* to ensure that all scheduled unregistrations have completed.
|
|
*/
|
|
void ib_unregister_device_queued(struct ib_device *ib_dev)
|
|
{
|
|
WARN_ON(!refcount_read(&ib_dev->refcount));
|
|
WARN_ON(!ib_dev->ops.dealloc_driver);
|
|
get_device(&ib_dev->dev);
|
|
if (!queue_work(system_unbound_wq, &ib_dev->unregistration_work))
|
|
put_device(&ib_dev->dev);
|
|
}
|
|
EXPORT_SYMBOL(ib_unregister_device_queued);
|
|
|
|
/*
|
|
* The caller must pass in a device that has the kref held and the refcount
|
|
* released. If the device is in cur_net and still registered then it is moved
|
|
* into net.
|
|
*/
|
|
static int rdma_dev_change_netns(struct ib_device *device, struct net *cur_net,
|
|
struct net *net)
|
|
{
|
|
int ret2 = -EINVAL;
|
|
int ret;
|
|
|
|
mutex_lock(&device->unregistration_lock);
|
|
|
|
/*
|
|
* If a device not under ib_device_get() or if the unregistration_lock
|
|
* is not held, the namespace can be changed, or it can be unregistered.
|
|
* Check again under the lock.
|
|
*/
|
|
if (refcount_read(&device->refcount) == 0 ||
|
|
!net_eq(cur_net, read_pnet(&device->coredev.rdma_net))) {
|
|
ret = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
kobject_uevent(&device->dev.kobj, KOBJ_REMOVE);
|
|
disable_device(device);
|
|
|
|
/*
|
|
* At this point no one can be using the device, so it is safe to
|
|
* change the namespace.
|
|
*/
|
|
write_pnet(&device->coredev.rdma_net, net);
|
|
|
|
down_read(&devices_rwsem);
|
|
/*
|
|
* Currently rdma devices are system wide unique. So the device name
|
|
* is guaranteed free in the new namespace. Publish the new namespace
|
|
* at the sysfs level.
|
|
*/
|
|
ret = device_rename(&device->dev, dev_name(&device->dev));
|
|
up_read(&devices_rwsem);
|
|
if (ret) {
|
|
dev_warn(&device->dev,
|
|
"%s: Couldn't rename device after namespace change\n",
|
|
__func__);
|
|
/* Try and put things back and re-enable the device */
|
|
write_pnet(&device->coredev.rdma_net, cur_net);
|
|
}
|
|
|
|
ret2 = enable_device_and_get(device);
|
|
if (ret2) {
|
|
/*
|
|
* This shouldn't really happen, but if it does, let the user
|
|
* retry at later point. So don't disable the device.
|
|
*/
|
|
dev_warn(&device->dev,
|
|
"%s: Couldn't re-enable device after namespace change\n",
|
|
__func__);
|
|
}
|
|
kobject_uevent(&device->dev.kobj, KOBJ_ADD);
|
|
|
|
ib_device_put(device);
|
|
out:
|
|
mutex_unlock(&device->unregistration_lock);
|
|
if (ret)
|
|
return ret;
|
|
return ret2;
|
|
}
|
|
|
|
int ib_device_set_netns_put(struct sk_buff *skb,
|
|
struct ib_device *dev, u32 ns_fd)
|
|
{
|
|
struct net *net;
|
|
int ret;
|
|
|
|
net = get_net_ns_by_fd(ns_fd);
|
|
if (IS_ERR(net)) {
|
|
ret = PTR_ERR(net);
|
|
goto net_err;
|
|
}
|
|
|
|
if (!netlink_ns_capable(skb, net->user_ns, CAP_NET_ADMIN)) {
|
|
ret = -EPERM;
|
|
goto ns_err;
|
|
}
|
|
|
|
/*
|
|
* Currently supported only for those providers which support
|
|
* disassociation and don't do port specific sysfs init. Once a
|
|
* port_cleanup infrastructure is implemented, this limitation will be
|
|
* removed.
|
|
*/
|
|
if (!dev->ops.disassociate_ucontext || dev->ops.init_port ||
|
|
ib_devices_shared_netns) {
|
|
ret = -EOPNOTSUPP;
|
|
goto ns_err;
|
|
}
|
|
|
|
get_device(&dev->dev);
|
|
ib_device_put(dev);
|
|
ret = rdma_dev_change_netns(dev, current->nsproxy->net_ns, net);
|
|
put_device(&dev->dev);
|
|
|
|
put_net(net);
|
|
return ret;
|
|
|
|
ns_err:
|
|
put_net(net);
|
|
net_err:
|
|
ib_device_put(dev);
|
|
return ret;
|
|
}
|
|
|
|
static struct pernet_operations rdma_dev_net_ops = {
|
|
.init = rdma_dev_init_net,
|
|
.exit = rdma_dev_exit_net,
|
|
.id = &rdma_dev_net_id,
|
|
.size = sizeof(struct rdma_dev_net),
|
|
};
|
|
|
|
static int assign_client_id(struct ib_client *client)
|
|
{
|
|
int ret;
|
|
|
|
down_write(&clients_rwsem);
|
|
/*
|
|
* The add/remove callbacks must be called in FIFO/LIFO order. To
|
|
* achieve this we assign client_ids so they are sorted in
|
|
* registration order.
|
|
*/
|
|
client->client_id = highest_client_id;
|
|
ret = xa_insert(&clients, client->client_id, client, GFP_KERNEL);
|
|
if (ret)
|
|
goto out;
|
|
|
|
highest_client_id++;
|
|
xa_set_mark(&clients, client->client_id, CLIENT_REGISTERED);
|
|
|
|
out:
|
|
up_write(&clients_rwsem);
|
|
return ret;
|
|
}
|
|
|
|
static void remove_client_id(struct ib_client *client)
|
|
{
|
|
down_write(&clients_rwsem);
|
|
xa_erase(&clients, client->client_id);
|
|
for (; highest_client_id; highest_client_id--)
|
|
if (xa_load(&clients, highest_client_id - 1))
|
|
break;
|
|
up_write(&clients_rwsem);
|
|
}
|
|
|
|
/**
|
|
* ib_register_client - Register an IB client
|
|
* @client:Client to register
|
|
*
|
|
* Upper level users of the IB drivers can use ib_register_client() to
|
|
* register callbacks for IB device addition and removal. When an IB
|
|
* device is added, each registered client's add method will be called
|
|
* (in the order the clients were registered), and when a device is
|
|
* removed, each client's remove method will be called (in the reverse
|
|
* order that clients were registered). In addition, when
|
|
* ib_register_client() is called, the client will receive an add
|
|
* callback for all devices already registered.
|
|
*/
|
|
int ib_register_client(struct ib_client *client)
|
|
{
|
|
struct ib_device *device;
|
|
unsigned long index;
|
|
int ret;
|
|
|
|
refcount_set(&client->uses, 1);
|
|
init_completion(&client->uses_zero);
|
|
ret = assign_client_id(client);
|
|
if (ret)
|
|
return ret;
|
|
|
|
down_read(&devices_rwsem);
|
|
xa_for_each_marked (&devices, index, device, DEVICE_REGISTERED) {
|
|
ret = add_client_context(device, client);
|
|
if (ret) {
|
|
up_read(&devices_rwsem);
|
|
ib_unregister_client(client);
|
|
return ret;
|
|
}
|
|
}
|
|
up_read(&devices_rwsem);
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(ib_register_client);
|
|
|
|
/**
|
|
* ib_unregister_client - Unregister an IB client
|
|
* @client:Client to unregister
|
|
*
|
|
* Upper level users use ib_unregister_client() to remove their client
|
|
* registration. When ib_unregister_client() is called, the client
|
|
* will receive a remove callback for each IB device still registered.
|
|
*
|
|
* This is a full fence, once it returns no client callbacks will be called,
|
|
* or are running in another thread.
|
|
*/
|
|
void ib_unregister_client(struct ib_client *client)
|
|
{
|
|
struct ib_device *device;
|
|
unsigned long index;
|
|
|
|
down_write(&clients_rwsem);
|
|
ib_client_put(client);
|
|
xa_clear_mark(&clients, client->client_id, CLIENT_REGISTERED);
|
|
up_write(&clients_rwsem);
|
|
|
|
/* We do not want to have locks while calling client->remove() */
|
|
rcu_read_lock();
|
|
xa_for_each (&devices, index, device) {
|
|
if (!ib_device_try_get(device))
|
|
continue;
|
|
rcu_read_unlock();
|
|
|
|
remove_client_context(device, client->client_id);
|
|
|
|
ib_device_put(device);
|
|
rcu_read_lock();
|
|
}
|
|
rcu_read_unlock();
|
|
|
|
/*
|
|
* remove_client_context() is not a fence, it can return even though a
|
|
* removal is ongoing. Wait until all removals are completed.
|
|
*/
|
|
wait_for_completion(&client->uses_zero);
|
|
remove_client_id(client);
|
|
}
|
|
EXPORT_SYMBOL(ib_unregister_client);
|
|
|
|
static int __ib_get_global_client_nl_info(const char *client_name,
|
|
struct ib_client_nl_info *res)
|
|
{
|
|
struct ib_client *client;
|
|
unsigned long index;
|
|
int ret = -ENOENT;
|
|
|
|
down_read(&clients_rwsem);
|
|
xa_for_each_marked (&clients, index, client, CLIENT_REGISTERED) {
|
|
if (strcmp(client->name, client_name) != 0)
|
|
continue;
|
|
if (!client->get_global_nl_info) {
|
|
ret = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
ret = client->get_global_nl_info(res);
|
|
if (WARN_ON(ret == -ENOENT))
|
|
ret = -EINVAL;
|
|
if (!ret && res->cdev)
|
|
get_device(res->cdev);
|
|
break;
|
|
}
|
|
up_read(&clients_rwsem);
|
|
return ret;
|
|
}
|
|
|
|
static int __ib_get_client_nl_info(struct ib_device *ibdev,
|
|
const char *client_name,
|
|
struct ib_client_nl_info *res)
|
|
{
|
|
unsigned long index;
|
|
void *client_data;
|
|
int ret = -ENOENT;
|
|
|
|
down_read(&ibdev->client_data_rwsem);
|
|
xan_for_each_marked (&ibdev->client_data, index, client_data,
|
|
CLIENT_DATA_REGISTERED) {
|
|
struct ib_client *client = xa_load(&clients, index);
|
|
|
|
if (!client || strcmp(client->name, client_name) != 0)
|
|
continue;
|
|
if (!client->get_nl_info) {
|
|
ret = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
ret = client->get_nl_info(ibdev, client_data, res);
|
|
if (WARN_ON(ret == -ENOENT))
|
|
ret = -EINVAL;
|
|
|
|
/*
|
|
* The cdev is guaranteed valid as long as we are inside the
|
|
* client_data_rwsem as remove_one can't be called. Keep it
|
|
* valid for the caller.
|
|
*/
|
|
if (!ret && res->cdev)
|
|
get_device(res->cdev);
|
|
break;
|
|
}
|
|
up_read(&ibdev->client_data_rwsem);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* ib_get_client_nl_info - Fetch the nl_info from a client
|
|
* @device - IB device
|
|
* @client_name - Name of the client
|
|
* @res - Result of the query
|
|
*/
|
|
int ib_get_client_nl_info(struct ib_device *ibdev, const char *client_name,
|
|
struct ib_client_nl_info *res)
|
|
{
|
|
int ret;
|
|
|
|
if (ibdev)
|
|
ret = __ib_get_client_nl_info(ibdev, client_name, res);
|
|
else
|
|
ret = __ib_get_global_client_nl_info(client_name, res);
|
|
#ifdef CONFIG_MODULES
|
|
if (ret == -ENOENT) {
|
|
request_module("rdma-client-%s", client_name);
|
|
if (ibdev)
|
|
ret = __ib_get_client_nl_info(ibdev, client_name, res);
|
|
else
|
|
ret = __ib_get_global_client_nl_info(client_name, res);
|
|
}
|
|
#endif
|
|
if (ret) {
|
|
if (ret == -ENOENT)
|
|
return -EOPNOTSUPP;
|
|
return ret;
|
|
}
|
|
|
|
if (WARN_ON(!res->cdev))
|
|
return -EINVAL;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ib_set_client_data - Set IB client context
|
|
* @device:Device to set context for
|
|
* @client:Client to set context for
|
|
* @data:Context to set
|
|
*
|
|
* ib_set_client_data() sets client context data that can be retrieved with
|
|
* ib_get_client_data(). This can only be called while the client is
|
|
* registered to the device, once the ib_client remove() callback returns this
|
|
* cannot be called.
|
|
*/
|
|
void ib_set_client_data(struct ib_device *device, struct ib_client *client,
|
|
void *data)
|
|
{
|
|
void *rc;
|
|
|
|
if (WARN_ON(IS_ERR(data)))
|
|
data = NULL;
|
|
|
|
rc = xa_store(&device->client_data, client->client_id, data,
|
|
GFP_KERNEL);
|
|
WARN_ON(xa_is_err(rc));
|
|
}
|
|
EXPORT_SYMBOL(ib_set_client_data);
|
|
|
|
/**
|
|
* ib_register_event_handler - Register an IB event handler
|
|
* @event_handler:Handler to register
|
|
*
|
|
* ib_register_event_handler() registers an event handler that will be
|
|
* called back when asynchronous IB events occur (as defined in
|
|
* chapter 11 of the InfiniBand Architecture Specification). This
|
|
* callback occurs in workqueue context.
|
|
*/
|
|
void ib_register_event_handler(struct ib_event_handler *event_handler)
|
|
{
|
|
down_write(&event_handler->device->event_handler_rwsem);
|
|
list_add_tail(&event_handler->list,
|
|
&event_handler->device->event_handler_list);
|
|
up_write(&event_handler->device->event_handler_rwsem);
|
|
}
|
|
EXPORT_SYMBOL(ib_register_event_handler);
|
|
|
|
/**
|
|
* ib_unregister_event_handler - Unregister an event handler
|
|
* @event_handler:Handler to unregister
|
|
*
|
|
* Unregister an event handler registered with
|
|
* ib_register_event_handler().
|
|
*/
|
|
void ib_unregister_event_handler(struct ib_event_handler *event_handler)
|
|
{
|
|
down_write(&event_handler->device->event_handler_rwsem);
|
|
list_del(&event_handler->list);
|
|
up_write(&event_handler->device->event_handler_rwsem);
|
|
}
|
|
EXPORT_SYMBOL(ib_unregister_event_handler);
|
|
|
|
void ib_dispatch_event_clients(struct ib_event *event)
|
|
{
|
|
struct ib_event_handler *handler;
|
|
|
|
down_read(&event->device->event_handler_rwsem);
|
|
|
|
list_for_each_entry(handler, &event->device->event_handler_list, list)
|
|
handler->handler(handler, event);
|
|
|
|
up_read(&event->device->event_handler_rwsem);
|
|
}
|
|
|
|
static int iw_query_port(struct ib_device *device,
|
|
u8 port_num,
|
|
struct ib_port_attr *port_attr)
|
|
{
|
|
struct in_device *inetdev;
|
|
struct net_device *netdev;
|
|
|
|
memset(port_attr, 0, sizeof(*port_attr));
|
|
|
|
netdev = ib_device_get_netdev(device, port_num);
|
|
if (!netdev)
|
|
return -ENODEV;
|
|
|
|
port_attr->max_mtu = IB_MTU_4096;
|
|
port_attr->active_mtu = ib_mtu_int_to_enum(netdev->mtu);
|
|
|
|
if (!netif_carrier_ok(netdev)) {
|
|
port_attr->state = IB_PORT_DOWN;
|
|
port_attr->phys_state = IB_PORT_PHYS_STATE_DISABLED;
|
|
} else {
|
|
rcu_read_lock();
|
|
inetdev = __in_dev_get_rcu(netdev);
|
|
|
|
if (inetdev && inetdev->ifa_list) {
|
|
port_attr->state = IB_PORT_ACTIVE;
|
|
port_attr->phys_state = IB_PORT_PHYS_STATE_LINK_UP;
|
|
} else {
|
|
port_attr->state = IB_PORT_INIT;
|
|
port_attr->phys_state =
|
|
IB_PORT_PHYS_STATE_PORT_CONFIGURATION_TRAINING;
|
|
}
|
|
|
|
rcu_read_unlock();
|
|
}
|
|
|
|
dev_put(netdev);
|
|
return device->ops.query_port(device, port_num, port_attr);
|
|
}
|
|
|
|
static int __ib_query_port(struct ib_device *device,
|
|
u8 port_num,
|
|
struct ib_port_attr *port_attr)
|
|
{
|
|
union ib_gid gid = {};
|
|
int err;
|
|
|
|
memset(port_attr, 0, sizeof(*port_attr));
|
|
|
|
err = device->ops.query_port(device, port_num, port_attr);
|
|
if (err || port_attr->subnet_prefix)
|
|
return err;
|
|
|
|
if (rdma_port_get_link_layer(device, port_num) !=
|
|
IB_LINK_LAYER_INFINIBAND)
|
|
return 0;
|
|
|
|
err = device->ops.query_gid(device, port_num, 0, &gid);
|
|
if (err)
|
|
return err;
|
|
|
|
port_attr->subnet_prefix = be64_to_cpu(gid.global.subnet_prefix);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* ib_query_port - Query IB port attributes
|
|
* @device:Device to query
|
|
* @port_num:Port number to query
|
|
* @port_attr:Port attributes
|
|
*
|
|
* ib_query_port() returns the attributes of a port through the
|
|
* @port_attr pointer.
|
|
*/
|
|
int ib_query_port(struct ib_device *device,
|
|
u8 port_num,
|
|
struct ib_port_attr *port_attr)
|
|
{
|
|
if (!rdma_is_port_valid(device, port_num))
|
|
return -EINVAL;
|
|
|
|
if (rdma_protocol_iwarp(device, port_num))
|
|
return iw_query_port(device, port_num, port_attr);
|
|
else
|
|
return __ib_query_port(device, port_num, port_attr);
|
|
}
|
|
EXPORT_SYMBOL(ib_query_port);
|
|
|
|
static void add_ndev_hash(struct ib_port_data *pdata)
|
|
{
|
|
unsigned long flags;
|
|
|
|
might_sleep();
|
|
|
|
spin_lock_irqsave(&ndev_hash_lock, flags);
|
|
if (hash_hashed(&pdata->ndev_hash_link)) {
|
|
hash_del_rcu(&pdata->ndev_hash_link);
|
|
spin_unlock_irqrestore(&ndev_hash_lock, flags);
|
|
/*
|
|
* We cannot do hash_add_rcu after a hash_del_rcu until the
|
|
* grace period
|
|
*/
|
|
synchronize_rcu();
|
|
spin_lock_irqsave(&ndev_hash_lock, flags);
|
|
}
|
|
if (pdata->netdev)
|
|
hash_add_rcu(ndev_hash, &pdata->ndev_hash_link,
|
|
(uintptr_t)pdata->netdev);
|
|
spin_unlock_irqrestore(&ndev_hash_lock, flags);
|
|
}
|
|
|
|
/**
|
|
* ib_device_set_netdev - Associate the ib_dev with an underlying net_device
|
|
* @ib_dev: Device to modify
|
|
* @ndev: net_device to affiliate, may be NULL
|
|
* @port: IB port the net_device is connected to
|
|
*
|
|
* Drivers should use this to link the ib_device to a netdev so the netdev
|
|
* shows up in interfaces like ib_enum_roce_netdev. Only one netdev may be
|
|
* affiliated with any port.
|
|
*
|
|
* The caller must ensure that the given ndev is not unregistered or
|
|
* unregistering, and that either the ib_device is unregistered or
|
|
* ib_device_set_netdev() is called with NULL when the ndev sends a
|
|
* NETDEV_UNREGISTER event.
|
|
*/
|
|
int ib_device_set_netdev(struct ib_device *ib_dev, struct net_device *ndev,
|
|
unsigned int port)
|
|
{
|
|
struct net_device *old_ndev;
|
|
struct ib_port_data *pdata;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
/*
|
|
* Drivers wish to call this before ib_register_driver, so we have to
|
|
* setup the port data early.
|
|
*/
|
|
ret = alloc_port_data(ib_dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!rdma_is_port_valid(ib_dev, port))
|
|
return -EINVAL;
|
|
|
|
pdata = &ib_dev->port_data[port];
|
|
spin_lock_irqsave(&pdata->netdev_lock, flags);
|
|
old_ndev = rcu_dereference_protected(
|
|
pdata->netdev, lockdep_is_held(&pdata->netdev_lock));
|
|
if (old_ndev == ndev) {
|
|
spin_unlock_irqrestore(&pdata->netdev_lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
if (ndev)
|
|
dev_hold(ndev);
|
|
rcu_assign_pointer(pdata->netdev, ndev);
|
|
spin_unlock_irqrestore(&pdata->netdev_lock, flags);
|
|
|
|
add_ndev_hash(pdata);
|
|
if (old_ndev)
|
|
dev_put(old_ndev);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(ib_device_set_netdev);
|
|
|
|
static void free_netdevs(struct ib_device *ib_dev)
|
|
{
|
|
unsigned long flags;
|
|
unsigned int port;
|
|
|
|
if (!ib_dev->port_data)
|
|
return;
|
|
|
|
rdma_for_each_port (ib_dev, port) {
|
|
struct ib_port_data *pdata = &ib_dev->port_data[port];
|
|
struct net_device *ndev;
|
|
|
|
spin_lock_irqsave(&pdata->netdev_lock, flags);
|
|
ndev = rcu_dereference_protected(
|
|
pdata->netdev, lockdep_is_held(&pdata->netdev_lock));
|
|
if (ndev) {
|
|
spin_lock(&ndev_hash_lock);
|
|
hash_del_rcu(&pdata->ndev_hash_link);
|
|
spin_unlock(&ndev_hash_lock);
|
|
|
|
/*
|
|
* If this is the last dev_put there is still a
|
|
* synchronize_rcu before the netdev is kfreed, so we
|
|
* can continue to rely on unlocked pointer
|
|
* comparisons after the put
|
|
*/
|
|
rcu_assign_pointer(pdata->netdev, NULL);
|
|
dev_put(ndev);
|
|
}
|
|
spin_unlock_irqrestore(&pdata->netdev_lock, flags);
|
|
}
|
|
}
|
|
|
|
struct net_device *ib_device_get_netdev(struct ib_device *ib_dev,
|
|
unsigned int port)
|
|
{
|
|
struct ib_port_data *pdata;
|
|
struct net_device *res;
|
|
|
|
if (!rdma_is_port_valid(ib_dev, port))
|
|
return NULL;
|
|
|
|
pdata = &ib_dev->port_data[port];
|
|
|
|
/*
|
|
* New drivers should use ib_device_set_netdev() not the legacy
|
|
* get_netdev().
|
|
*/
|
|
if (ib_dev->ops.get_netdev)
|
|
res = ib_dev->ops.get_netdev(ib_dev, port);
|
|
else {
|
|
spin_lock(&pdata->netdev_lock);
|
|
res = rcu_dereference_protected(
|
|
pdata->netdev, lockdep_is_held(&pdata->netdev_lock));
|
|
if (res)
|
|
dev_hold(res);
|
|
spin_unlock(&pdata->netdev_lock);
|
|
}
|
|
|
|
/*
|
|
* If we are starting to unregister expedite things by preventing
|
|
* propagation of an unregistering netdev.
|
|
*/
|
|
if (res && res->reg_state != NETREG_REGISTERED) {
|
|
dev_put(res);
|
|
return NULL;
|
|
}
|
|
|
|
return res;
|
|
}
|
|
|
|
/**
|
|
* ib_device_get_by_netdev - Find an IB device associated with a netdev
|
|
* @ndev: netdev to locate
|
|
* @driver_id: The driver ID that must match (RDMA_DRIVER_UNKNOWN matches all)
|
|
*
|
|
* Find and hold an ib_device that is associated with a netdev via
|
|
* ib_device_set_netdev(). The caller must call ib_device_put() on the
|
|
* returned pointer.
|
|
*/
|
|
struct ib_device *ib_device_get_by_netdev(struct net_device *ndev,
|
|
enum rdma_driver_id driver_id)
|
|
{
|
|
struct ib_device *res = NULL;
|
|
struct ib_port_data *cur;
|
|
|
|
rcu_read_lock();
|
|
hash_for_each_possible_rcu (ndev_hash, cur, ndev_hash_link,
|
|
(uintptr_t)ndev) {
|
|
if (rcu_access_pointer(cur->netdev) == ndev &&
|
|
(driver_id == RDMA_DRIVER_UNKNOWN ||
|
|
cur->ib_dev->ops.driver_id == driver_id) &&
|
|
ib_device_try_get(cur->ib_dev)) {
|
|
res = cur->ib_dev;
|
|
break;
|
|
}
|
|
}
|
|
rcu_read_unlock();
|
|
|
|
return res;
|
|
}
|
|
EXPORT_SYMBOL(ib_device_get_by_netdev);
|
|
|
|
/**
|
|
* ib_enum_roce_netdev - enumerate all RoCE ports
|
|
* @ib_dev : IB device we want to query
|
|
* @filter: Should we call the callback?
|
|
* @filter_cookie: Cookie passed to filter
|
|
* @cb: Callback to call for each found RoCE ports
|
|
* @cookie: Cookie passed back to the callback
|
|
*
|
|
* Enumerates all of the physical RoCE ports of ib_dev
|
|
* which are related to netdevice and calls callback() on each
|
|
* device for which filter() function returns non zero.
|
|
*/
|
|
void ib_enum_roce_netdev(struct ib_device *ib_dev,
|
|
roce_netdev_filter filter,
|
|
void *filter_cookie,
|
|
roce_netdev_callback cb,
|
|
void *cookie)
|
|
{
|
|
unsigned int port;
|
|
|
|
rdma_for_each_port (ib_dev, port)
|
|
if (rdma_protocol_roce(ib_dev, port)) {
|
|
struct net_device *idev =
|
|
ib_device_get_netdev(ib_dev, port);
|
|
|
|
if (filter(ib_dev, port, idev, filter_cookie))
|
|
cb(ib_dev, port, idev, cookie);
|
|
|
|
if (idev)
|
|
dev_put(idev);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* ib_enum_all_roce_netdevs - enumerate all RoCE devices
|
|
* @filter: Should we call the callback?
|
|
* @filter_cookie: Cookie passed to filter
|
|
* @cb: Callback to call for each found RoCE ports
|
|
* @cookie: Cookie passed back to the callback
|
|
*
|
|
* Enumerates all RoCE devices' physical ports which are related
|
|
* to netdevices and calls callback() on each device for which
|
|
* filter() function returns non zero.
|
|
*/
|
|
void ib_enum_all_roce_netdevs(roce_netdev_filter filter,
|
|
void *filter_cookie,
|
|
roce_netdev_callback cb,
|
|
void *cookie)
|
|
{
|
|
struct ib_device *dev;
|
|
unsigned long index;
|
|
|
|
down_read(&devices_rwsem);
|
|
xa_for_each_marked (&devices, index, dev, DEVICE_REGISTERED)
|
|
ib_enum_roce_netdev(dev, filter, filter_cookie, cb, cookie);
|
|
up_read(&devices_rwsem);
|
|
}
|
|
|
|
/**
|
|
* ib_enum_all_devs - enumerate all ib_devices
|
|
* @cb: Callback to call for each found ib_device
|
|
*
|
|
* Enumerates all ib_devices and calls callback() on each device.
|
|
*/
|
|
int ib_enum_all_devs(nldev_callback nldev_cb, struct sk_buff *skb,
|
|
struct netlink_callback *cb)
|
|
{
|
|
unsigned long index;
|
|
struct ib_device *dev;
|
|
unsigned int idx = 0;
|
|
int ret = 0;
|
|
|
|
down_read(&devices_rwsem);
|
|
xa_for_each_marked (&devices, index, dev, DEVICE_REGISTERED) {
|
|
if (!rdma_dev_access_netns(dev, sock_net(skb->sk)))
|
|
continue;
|
|
|
|
ret = nldev_cb(dev, skb, cb, idx);
|
|
if (ret)
|
|
break;
|
|
idx++;
|
|
}
|
|
up_read(&devices_rwsem);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* ib_query_pkey - Get P_Key table entry
|
|
* @device:Device to query
|
|
* @port_num:Port number to query
|
|
* @index:P_Key table index to query
|
|
* @pkey:Returned P_Key
|
|
*
|
|
* ib_query_pkey() fetches the specified P_Key table entry.
|
|
*/
|
|
int ib_query_pkey(struct ib_device *device,
|
|
u8 port_num, u16 index, u16 *pkey)
|
|
{
|
|
if (!rdma_is_port_valid(device, port_num))
|
|
return -EINVAL;
|
|
|
|
return device->ops.query_pkey(device, port_num, index, pkey);
|
|
}
|
|
EXPORT_SYMBOL(ib_query_pkey);
|
|
|
|
/**
|
|
* ib_modify_device - Change IB device attributes
|
|
* @device:Device to modify
|
|
* @device_modify_mask:Mask of attributes to change
|
|
* @device_modify:New attribute values
|
|
*
|
|
* ib_modify_device() changes a device's attributes as specified by
|
|
* the @device_modify_mask and @device_modify structure.
|
|
*/
|
|
int ib_modify_device(struct ib_device *device,
|
|
int device_modify_mask,
|
|
struct ib_device_modify *device_modify)
|
|
{
|
|
if (!device->ops.modify_device)
|
|
return -EOPNOTSUPP;
|
|
|
|
return device->ops.modify_device(device, device_modify_mask,
|
|
device_modify);
|
|
}
|
|
EXPORT_SYMBOL(ib_modify_device);
|
|
|
|
/**
|
|
* ib_modify_port - Modifies the attributes for the specified port.
|
|
* @device: The device to modify.
|
|
* @port_num: The number of the port to modify.
|
|
* @port_modify_mask: Mask used to specify which attributes of the port
|
|
* to change.
|
|
* @port_modify: New attribute values for the port.
|
|
*
|
|
* ib_modify_port() changes a port's attributes as specified by the
|
|
* @port_modify_mask and @port_modify structure.
|
|
*/
|
|
int ib_modify_port(struct ib_device *device,
|
|
u8 port_num, int port_modify_mask,
|
|
struct ib_port_modify *port_modify)
|
|
{
|
|
int rc;
|
|
|
|
if (!rdma_is_port_valid(device, port_num))
|
|
return -EINVAL;
|
|
|
|
if (device->ops.modify_port)
|
|
rc = device->ops.modify_port(device, port_num,
|
|
port_modify_mask,
|
|
port_modify);
|
|
else if (rdma_protocol_roce(device, port_num) &&
|
|
((port_modify->set_port_cap_mask & ~IB_PORT_CM_SUP) == 0 ||
|
|
(port_modify->clr_port_cap_mask & ~IB_PORT_CM_SUP) == 0))
|
|
rc = 0;
|
|
else
|
|
rc = -EOPNOTSUPP;
|
|
return rc;
|
|
}
|
|
EXPORT_SYMBOL(ib_modify_port);
|
|
|
|
/**
|
|
* ib_find_gid - Returns the port number and GID table index where
|
|
* a specified GID value occurs. Its searches only for IB link layer.
|
|
* @device: The device to query.
|
|
* @gid: The GID value to search for.
|
|
* @port_num: The port number of the device where the GID value was found.
|
|
* @index: The index into the GID table where the GID was found. This
|
|
* parameter may be NULL.
|
|
*/
|
|
int ib_find_gid(struct ib_device *device, union ib_gid *gid,
|
|
u8 *port_num, u16 *index)
|
|
{
|
|
union ib_gid tmp_gid;
|
|
unsigned int port;
|
|
int ret, i;
|
|
|
|
rdma_for_each_port (device, port) {
|
|
if (!rdma_protocol_ib(device, port))
|
|
continue;
|
|
|
|
for (i = 0; i < device->port_data[port].immutable.gid_tbl_len;
|
|
++i) {
|
|
ret = rdma_query_gid(device, port, i, &tmp_gid);
|
|
if (ret)
|
|
return ret;
|
|
if (!memcmp(&tmp_gid, gid, sizeof *gid)) {
|
|
*port_num = port;
|
|
if (index)
|
|
*index = i;
|
|
return 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
return -ENOENT;
|
|
}
|
|
EXPORT_SYMBOL(ib_find_gid);
|
|
|
|
/**
|
|
* ib_find_pkey - Returns the PKey table index where a specified
|
|
* PKey value occurs.
|
|
* @device: The device to query.
|
|
* @port_num: The port number of the device to search for the PKey.
|
|
* @pkey: The PKey value to search for.
|
|
* @index: The index into the PKey table where the PKey was found.
|
|
*/
|
|
int ib_find_pkey(struct ib_device *device,
|
|
u8 port_num, u16 pkey, u16 *index)
|
|
{
|
|
int ret, i;
|
|
u16 tmp_pkey;
|
|
int partial_ix = -1;
|
|
|
|
for (i = 0; i < device->port_data[port_num].immutable.pkey_tbl_len;
|
|
++i) {
|
|
ret = ib_query_pkey(device, port_num, i, &tmp_pkey);
|
|
if (ret)
|
|
return ret;
|
|
if ((pkey & 0x7fff) == (tmp_pkey & 0x7fff)) {
|
|
/* if there is full-member pkey take it.*/
|
|
if (tmp_pkey & 0x8000) {
|
|
*index = i;
|
|
return 0;
|
|
}
|
|
if (partial_ix < 0)
|
|
partial_ix = i;
|
|
}
|
|
}
|
|
|
|
/*no full-member, if exists take the limited*/
|
|
if (partial_ix >= 0) {
|
|
*index = partial_ix;
|
|
return 0;
|
|
}
|
|
return -ENOENT;
|
|
}
|
|
EXPORT_SYMBOL(ib_find_pkey);
|
|
|
|
/**
|
|
* ib_get_net_dev_by_params() - Return the appropriate net_dev
|
|
* for a received CM request
|
|
* @dev: An RDMA device on which the request has been received.
|
|
* @port: Port number on the RDMA device.
|
|
* @pkey: The Pkey the request came on.
|
|
* @gid: A GID that the net_dev uses to communicate.
|
|
* @addr: Contains the IP address that the request specified as its
|
|
* destination.
|
|
*
|
|
*/
|
|
struct net_device *ib_get_net_dev_by_params(struct ib_device *dev,
|
|
u8 port,
|
|
u16 pkey,
|
|
const union ib_gid *gid,
|
|
const struct sockaddr *addr)
|
|
{
|
|
struct net_device *net_dev = NULL;
|
|
unsigned long index;
|
|
void *client_data;
|
|
|
|
if (!rdma_protocol_ib(dev, port))
|
|
return NULL;
|
|
|
|
/*
|
|
* Holding the read side guarantees that the client will not become
|
|
* unregistered while we are calling get_net_dev_by_params()
|
|
*/
|
|
down_read(&dev->client_data_rwsem);
|
|
xan_for_each_marked (&dev->client_data, index, client_data,
|
|
CLIENT_DATA_REGISTERED) {
|
|
struct ib_client *client = xa_load(&clients, index);
|
|
|
|
if (!client || !client->get_net_dev_by_params)
|
|
continue;
|
|
|
|
net_dev = client->get_net_dev_by_params(dev, port, pkey, gid,
|
|
addr, client_data);
|
|
if (net_dev)
|
|
break;
|
|
}
|
|
up_read(&dev->client_data_rwsem);
|
|
|
|
return net_dev;
|
|
}
|
|
EXPORT_SYMBOL(ib_get_net_dev_by_params);
|
|
|
|
void ib_set_device_ops(struct ib_device *dev, const struct ib_device_ops *ops)
|
|
{
|
|
struct ib_device_ops *dev_ops = &dev->ops;
|
|
#define SET_DEVICE_OP(ptr, name) \
|
|
do { \
|
|
if (ops->name) \
|
|
if (!((ptr)->name)) \
|
|
(ptr)->name = ops->name; \
|
|
} while (0)
|
|
|
|
#define SET_OBJ_SIZE(ptr, name) SET_DEVICE_OP(ptr, size_##name)
|
|
|
|
if (ops->driver_id != RDMA_DRIVER_UNKNOWN) {
|
|
WARN_ON(dev_ops->driver_id != RDMA_DRIVER_UNKNOWN &&
|
|
dev_ops->driver_id != ops->driver_id);
|
|
dev_ops->driver_id = ops->driver_id;
|
|
}
|
|
if (ops->owner) {
|
|
WARN_ON(dev_ops->owner && dev_ops->owner != ops->owner);
|
|
dev_ops->owner = ops->owner;
|
|
}
|
|
if (ops->uverbs_abi_ver)
|
|
dev_ops->uverbs_abi_ver = ops->uverbs_abi_ver;
|
|
|
|
dev_ops->uverbs_no_driver_id_binding |=
|
|
ops->uverbs_no_driver_id_binding;
|
|
|
|
SET_DEVICE_OP(dev_ops, add_gid);
|
|
SET_DEVICE_OP(dev_ops, advise_mr);
|
|
SET_DEVICE_OP(dev_ops, alloc_dm);
|
|
SET_DEVICE_OP(dev_ops, alloc_fmr);
|
|
SET_DEVICE_OP(dev_ops, alloc_hw_stats);
|
|
SET_DEVICE_OP(dev_ops, alloc_mr);
|
|
SET_DEVICE_OP(dev_ops, alloc_mr_integrity);
|
|
SET_DEVICE_OP(dev_ops, alloc_mw);
|
|
SET_DEVICE_OP(dev_ops, alloc_pd);
|
|
SET_DEVICE_OP(dev_ops, alloc_rdma_netdev);
|
|
SET_DEVICE_OP(dev_ops, alloc_ucontext);
|
|
SET_DEVICE_OP(dev_ops, alloc_xrcd);
|
|
SET_DEVICE_OP(dev_ops, attach_mcast);
|
|
SET_DEVICE_OP(dev_ops, check_mr_status);
|
|
SET_DEVICE_OP(dev_ops, counter_alloc_stats);
|
|
SET_DEVICE_OP(dev_ops, counter_bind_qp);
|
|
SET_DEVICE_OP(dev_ops, counter_dealloc);
|
|
SET_DEVICE_OP(dev_ops, counter_unbind_qp);
|
|
SET_DEVICE_OP(dev_ops, counter_update_stats);
|
|
SET_DEVICE_OP(dev_ops, create_ah);
|
|
SET_DEVICE_OP(dev_ops, create_counters);
|
|
SET_DEVICE_OP(dev_ops, create_cq);
|
|
SET_DEVICE_OP(dev_ops, create_flow);
|
|
SET_DEVICE_OP(dev_ops, create_flow_action_esp);
|
|
SET_DEVICE_OP(dev_ops, create_qp);
|
|
SET_DEVICE_OP(dev_ops, create_rwq_ind_table);
|
|
SET_DEVICE_OP(dev_ops, create_srq);
|
|
SET_DEVICE_OP(dev_ops, create_wq);
|
|
SET_DEVICE_OP(dev_ops, dealloc_dm);
|
|
SET_DEVICE_OP(dev_ops, dealloc_driver);
|
|
SET_DEVICE_OP(dev_ops, dealloc_fmr);
|
|
SET_DEVICE_OP(dev_ops, dealloc_mw);
|
|
SET_DEVICE_OP(dev_ops, dealloc_pd);
|
|
SET_DEVICE_OP(dev_ops, dealloc_ucontext);
|
|
SET_DEVICE_OP(dev_ops, dealloc_xrcd);
|
|
SET_DEVICE_OP(dev_ops, del_gid);
|
|
SET_DEVICE_OP(dev_ops, dereg_mr);
|
|
SET_DEVICE_OP(dev_ops, destroy_ah);
|
|
SET_DEVICE_OP(dev_ops, destroy_counters);
|
|
SET_DEVICE_OP(dev_ops, destroy_cq);
|
|
SET_DEVICE_OP(dev_ops, destroy_flow);
|
|
SET_DEVICE_OP(dev_ops, destroy_flow_action);
|
|
SET_DEVICE_OP(dev_ops, destroy_qp);
|
|
SET_DEVICE_OP(dev_ops, destroy_rwq_ind_table);
|
|
SET_DEVICE_OP(dev_ops, destroy_srq);
|
|
SET_DEVICE_OP(dev_ops, destroy_wq);
|
|
SET_DEVICE_OP(dev_ops, detach_mcast);
|
|
SET_DEVICE_OP(dev_ops, disassociate_ucontext);
|
|
SET_DEVICE_OP(dev_ops, drain_rq);
|
|
SET_DEVICE_OP(dev_ops, drain_sq);
|
|
SET_DEVICE_OP(dev_ops, enable_driver);
|
|
SET_DEVICE_OP(dev_ops, fill_res_entry);
|
|
SET_DEVICE_OP(dev_ops, fill_stat_entry);
|
|
SET_DEVICE_OP(dev_ops, get_dev_fw_str);
|
|
SET_DEVICE_OP(dev_ops, get_dma_mr);
|
|
SET_DEVICE_OP(dev_ops, get_hw_stats);
|
|
SET_DEVICE_OP(dev_ops, get_link_layer);
|
|
SET_DEVICE_OP(dev_ops, get_netdev);
|
|
SET_DEVICE_OP(dev_ops, get_port_immutable);
|
|
SET_DEVICE_OP(dev_ops, get_vector_affinity);
|
|
SET_DEVICE_OP(dev_ops, get_vf_config);
|
|
SET_DEVICE_OP(dev_ops, get_vf_guid);
|
|
SET_DEVICE_OP(dev_ops, get_vf_stats);
|
|
SET_DEVICE_OP(dev_ops, init_port);
|
|
SET_DEVICE_OP(dev_ops, iw_accept);
|
|
SET_DEVICE_OP(dev_ops, iw_add_ref);
|
|
SET_DEVICE_OP(dev_ops, iw_connect);
|
|
SET_DEVICE_OP(dev_ops, iw_create_listen);
|
|
SET_DEVICE_OP(dev_ops, iw_destroy_listen);
|
|
SET_DEVICE_OP(dev_ops, iw_get_qp);
|
|
SET_DEVICE_OP(dev_ops, iw_reject);
|
|
SET_DEVICE_OP(dev_ops, iw_rem_ref);
|
|
SET_DEVICE_OP(dev_ops, map_mr_sg);
|
|
SET_DEVICE_OP(dev_ops, map_mr_sg_pi);
|
|
SET_DEVICE_OP(dev_ops, map_phys_fmr);
|
|
SET_DEVICE_OP(dev_ops, mmap);
|
|
SET_DEVICE_OP(dev_ops, mmap_free);
|
|
SET_DEVICE_OP(dev_ops, modify_ah);
|
|
SET_DEVICE_OP(dev_ops, modify_cq);
|
|
SET_DEVICE_OP(dev_ops, modify_device);
|
|
SET_DEVICE_OP(dev_ops, modify_flow_action_esp);
|
|
SET_DEVICE_OP(dev_ops, modify_port);
|
|
SET_DEVICE_OP(dev_ops, modify_qp);
|
|
SET_DEVICE_OP(dev_ops, modify_srq);
|
|
SET_DEVICE_OP(dev_ops, modify_wq);
|
|
SET_DEVICE_OP(dev_ops, peek_cq);
|
|
SET_DEVICE_OP(dev_ops, poll_cq);
|
|
SET_DEVICE_OP(dev_ops, post_recv);
|
|
SET_DEVICE_OP(dev_ops, post_send);
|
|
SET_DEVICE_OP(dev_ops, post_srq_recv);
|
|
SET_DEVICE_OP(dev_ops, process_mad);
|
|
SET_DEVICE_OP(dev_ops, query_ah);
|
|
SET_DEVICE_OP(dev_ops, query_device);
|
|
SET_DEVICE_OP(dev_ops, query_gid);
|
|
SET_DEVICE_OP(dev_ops, query_pkey);
|
|
SET_DEVICE_OP(dev_ops, query_port);
|
|
SET_DEVICE_OP(dev_ops, query_qp);
|
|
SET_DEVICE_OP(dev_ops, query_srq);
|
|
SET_DEVICE_OP(dev_ops, rdma_netdev_get_params);
|
|
SET_DEVICE_OP(dev_ops, read_counters);
|
|
SET_DEVICE_OP(dev_ops, reg_dm_mr);
|
|
SET_DEVICE_OP(dev_ops, reg_user_mr);
|
|
SET_DEVICE_OP(dev_ops, req_ncomp_notif);
|
|
SET_DEVICE_OP(dev_ops, req_notify_cq);
|
|
SET_DEVICE_OP(dev_ops, rereg_user_mr);
|
|
SET_DEVICE_OP(dev_ops, resize_cq);
|
|
SET_DEVICE_OP(dev_ops, set_vf_guid);
|
|
SET_DEVICE_OP(dev_ops, set_vf_link_state);
|
|
SET_DEVICE_OP(dev_ops, unmap_fmr);
|
|
|
|
SET_OBJ_SIZE(dev_ops, ib_ah);
|
|
SET_OBJ_SIZE(dev_ops, ib_cq);
|
|
SET_OBJ_SIZE(dev_ops, ib_pd);
|
|
SET_OBJ_SIZE(dev_ops, ib_srq);
|
|
SET_OBJ_SIZE(dev_ops, ib_ucontext);
|
|
}
|
|
EXPORT_SYMBOL(ib_set_device_ops);
|
|
|
|
static const struct rdma_nl_cbs ibnl_ls_cb_table[RDMA_NL_LS_NUM_OPS] = {
|
|
[RDMA_NL_LS_OP_RESOLVE] = {
|
|
.doit = ib_nl_handle_resolve_resp,
|
|
.flags = RDMA_NL_ADMIN_PERM,
|
|
},
|
|
[RDMA_NL_LS_OP_SET_TIMEOUT] = {
|
|
.doit = ib_nl_handle_set_timeout,
|
|
.flags = RDMA_NL_ADMIN_PERM,
|
|
},
|
|
[RDMA_NL_LS_OP_IP_RESOLVE] = {
|
|
.doit = ib_nl_handle_ip_res_resp,
|
|
.flags = RDMA_NL_ADMIN_PERM,
|
|
},
|
|
};
|
|
|
|
static int __init ib_core_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ib_wq = alloc_workqueue("infiniband", 0, 0);
|
|
if (!ib_wq)
|
|
return -ENOMEM;
|
|
|
|
ib_comp_wq = alloc_workqueue("ib-comp-wq",
|
|
WQ_HIGHPRI | WQ_MEM_RECLAIM | WQ_SYSFS, 0);
|
|
if (!ib_comp_wq) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
ib_comp_unbound_wq =
|
|
alloc_workqueue("ib-comp-unb-wq",
|
|
WQ_UNBOUND | WQ_HIGHPRI | WQ_MEM_RECLAIM |
|
|
WQ_SYSFS, WQ_UNBOUND_MAX_ACTIVE);
|
|
if (!ib_comp_unbound_wq) {
|
|
ret = -ENOMEM;
|
|
goto err_comp;
|
|
}
|
|
|
|
ret = class_register(&ib_class);
|
|
if (ret) {
|
|
pr_warn("Couldn't create InfiniBand device class\n");
|
|
goto err_comp_unbound;
|
|
}
|
|
|
|
rdma_nl_init();
|
|
|
|
ret = addr_init();
|
|
if (ret) {
|
|
pr_warn("Could't init IB address resolution\n");
|
|
goto err_ibnl;
|
|
}
|
|
|
|
ret = ib_mad_init();
|
|
if (ret) {
|
|
pr_warn("Couldn't init IB MAD\n");
|
|
goto err_addr;
|
|
}
|
|
|
|
ret = ib_sa_init();
|
|
if (ret) {
|
|
pr_warn("Couldn't init SA\n");
|
|
goto err_mad;
|
|
}
|
|
|
|
ret = register_blocking_lsm_notifier(&ibdev_lsm_nb);
|
|
if (ret) {
|
|
pr_warn("Couldn't register LSM notifier. ret %d\n", ret);
|
|
goto err_sa;
|
|
}
|
|
|
|
ret = register_pernet_device(&rdma_dev_net_ops);
|
|
if (ret) {
|
|
pr_warn("Couldn't init compat dev. ret %d\n", ret);
|
|
goto err_compat;
|
|
}
|
|
|
|
nldev_init();
|
|
rdma_nl_register(RDMA_NL_LS, ibnl_ls_cb_table);
|
|
roce_gid_mgmt_init();
|
|
|
|
return 0;
|
|
|
|
err_compat:
|
|
unregister_blocking_lsm_notifier(&ibdev_lsm_nb);
|
|
err_sa:
|
|
ib_sa_cleanup();
|
|
err_mad:
|
|
ib_mad_cleanup();
|
|
err_addr:
|
|
addr_cleanup();
|
|
err_ibnl:
|
|
class_unregister(&ib_class);
|
|
err_comp_unbound:
|
|
destroy_workqueue(ib_comp_unbound_wq);
|
|
err_comp:
|
|
destroy_workqueue(ib_comp_wq);
|
|
err:
|
|
destroy_workqueue(ib_wq);
|
|
return ret;
|
|
}
|
|
|
|
static void __exit ib_core_cleanup(void)
|
|
{
|
|
roce_gid_mgmt_cleanup();
|
|
nldev_exit();
|
|
rdma_nl_unregister(RDMA_NL_LS);
|
|
unregister_pernet_device(&rdma_dev_net_ops);
|
|
unregister_blocking_lsm_notifier(&ibdev_lsm_nb);
|
|
ib_sa_cleanup();
|
|
ib_mad_cleanup();
|
|
addr_cleanup();
|
|
rdma_nl_exit();
|
|
class_unregister(&ib_class);
|
|
destroy_workqueue(ib_comp_unbound_wq);
|
|
destroy_workqueue(ib_comp_wq);
|
|
/* Make sure that any pending umem accounting work is done. */
|
|
destroy_workqueue(ib_wq);
|
|
flush_workqueue(system_unbound_wq);
|
|
WARN_ON(!xa_empty(&clients));
|
|
WARN_ON(!xa_empty(&devices));
|
|
}
|
|
|
|
MODULE_ALIAS_RDMA_NETLINK(RDMA_NL_LS, 4);
|
|
|
|
/* ib core relies on netdev stack to first register net_ns_type_operations
|
|
* ns kobject type before ib_core initialization.
|
|
*/
|
|
fs_initcall(ib_core_init);
|
|
module_exit(ib_core_cleanup);
|