mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-21 18:27:13 +07:00
75f5db39ff
Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver. -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQEcBAABAgAGBQJWOehzAAoJECTWi3JdVIfQTPYH+wYMDG8gAIw2s0AJ4DvVe4qZ sOAm1UgUJZxssrEA6BNqbfM0dfRo+oQJKmRd0Dc5n7LEMsYHdI/5yKHk8PCS6ZzD iQyQCzbd0thDAqwuPaMP62cyPDHwyJX22VGTsgVnj6AZqAQ+9+g4SPKhFnm1Mlm4 hmDi6fdSrsqo8k8gkpVN8RFOfVsjAV1dLtAauQRWDHrqMxXURSrKG76eqAqUa5bn BLPXBoj5PA0DMLPO2j+ADZwWN723LrI2mSSlc+ThjEX/OIt2OhAoiOTV5RPqaafy TIsCkh68q/gYAsL5HtvvmgZByl41FLYiO0Z+rXmWUyMMbnvhZTLws9S2BNpBLuk= =DgXG -----END PGP SIGNATURE----- Merge tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "Quite a lot of activity in SPI this cycle, almost all of it in drivers with a few minor improvements and tweaks in the core. - Updates to pxa2xx to support Intel Broxton and multiple chip selects. - Support for big endian in the bcm63xx driver. - Multiple slave support for the mt8173 - New driver for the auxiliary SPI controller in bcm2835 SoCs. - Support for Layerscale SoCs in the Freescale DSPI driver" * tag 'spi-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (87 commits) spi: pxa2xx: Rework self-initiated platform data creation for non-ACPI spi: pxa2xx: Add support for Intel Broxton spi: pxa2xx: Detect number of enabled Intel LPSS SPI chip select signals spi: pxa2xx: Add output control for multiple Intel LPSS chip selects spi: pxa2xx: Use LPSS prefix for defines that are Intel LPSS specific spi: Add DSPI support for layerscape family spi: ti-qspi: improve ->remove() callback spi/spi-xilinx: Fix race condition on last word read spi: Drop owner assignment from spi_drivers spi: Add THIS_MODULE to spi_driver in SPI core spi: Setup the master controller driver before setting the chipselect spi: dw: replace magic constant by DW_SPI_DR spi: mediatek: mt8173 spi multiple devices support spi: mediatek: handle controller_data in mtk_spi_setup spi: mediatek: remove mtk_spi_config spi: mediatek: Update document devicetree bindings to support multiple devices spi: fix kernel-doc warnings about missing return desc in spi.c spi: fix kernel-doc warnings about missing return desc in spi.h spi: pxa2xx: Align a few defines spi: pxa2xx: Save other reg_cs_ctrl bits when configuring chip select ...
647 lines
16 KiB
C
647 lines
16 KiB
C
/*
|
|
* ADF4350/ADF4351 SPI Wideband Synthesizer driver
|
|
*
|
|
* Copyright 2012-2013 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2.
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/err.h>
|
|
#include <linux/module.h>
|
|
#include <linux/gcd.h>
|
|
#include <linux/gpio.h>
|
|
#include <asm/div64.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_gpio.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/frequency/adf4350.h>
|
|
|
|
enum {
|
|
ADF4350_FREQ,
|
|
ADF4350_FREQ_REFIN,
|
|
ADF4350_FREQ_RESOLUTION,
|
|
ADF4350_PWRDOWN,
|
|
};
|
|
|
|
struct adf4350_state {
|
|
struct spi_device *spi;
|
|
struct regulator *reg;
|
|
struct adf4350_platform_data *pdata;
|
|
struct clk *clk;
|
|
unsigned long clkin;
|
|
unsigned long chspc; /* Channel Spacing */
|
|
unsigned long fpfd; /* Phase Frequency Detector */
|
|
unsigned long min_out_freq;
|
|
unsigned r0_fract;
|
|
unsigned r0_int;
|
|
unsigned r1_mod;
|
|
unsigned r4_rf_div_sel;
|
|
unsigned long regs[6];
|
|
unsigned long regs_hw[6];
|
|
unsigned long long freq_req;
|
|
/*
|
|
* DMA (thus cache coherency maintenance) requires the
|
|
* transfer buffers to live in their own cache lines.
|
|
*/
|
|
__be32 val ____cacheline_aligned;
|
|
};
|
|
|
|
static struct adf4350_platform_data default_pdata = {
|
|
.channel_spacing = 10000,
|
|
.r2_user_settings = ADF4350_REG2_PD_POLARITY_POS |
|
|
ADF4350_REG2_CHARGE_PUMP_CURR_uA(2500),
|
|
.r3_user_settings = ADF4350_REG3_12BIT_CLKDIV_MODE(0),
|
|
.r4_user_settings = ADF4350_REG4_OUTPUT_PWR(3) |
|
|
ADF4350_REG4_MUTE_TILL_LOCK_EN,
|
|
.gpio_lock_detect = -1,
|
|
};
|
|
|
|
static int adf4350_sync_config(struct adf4350_state *st)
|
|
{
|
|
int ret, i, doublebuf = 0;
|
|
|
|
for (i = ADF4350_REG5; i >= ADF4350_REG0; i--) {
|
|
if ((st->regs_hw[i] != st->regs[i]) ||
|
|
((i == ADF4350_REG0) && doublebuf)) {
|
|
switch (i) {
|
|
case ADF4350_REG1:
|
|
case ADF4350_REG4:
|
|
doublebuf = 1;
|
|
break;
|
|
}
|
|
|
|
st->val = cpu_to_be32(st->regs[i] | i);
|
|
ret = spi_write(st->spi, &st->val, 4);
|
|
if (ret < 0)
|
|
return ret;
|
|
st->regs_hw[i] = st->regs[i];
|
|
dev_dbg(&st->spi->dev, "[%d] 0x%X\n",
|
|
i, (u32)st->regs[i] | i);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int adf4350_reg_access(struct iio_dev *indio_dev,
|
|
unsigned reg, unsigned writeval,
|
|
unsigned *readval)
|
|
{
|
|
struct adf4350_state *st = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
if (reg > ADF4350_REG5)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&indio_dev->mlock);
|
|
if (readval == NULL) {
|
|
st->regs[reg] = writeval & ~(BIT(0) | BIT(1) | BIT(2));
|
|
ret = adf4350_sync_config(st);
|
|
} else {
|
|
*readval = st->regs_hw[reg];
|
|
ret = 0;
|
|
}
|
|
mutex_unlock(&indio_dev->mlock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int adf4350_tune_r_cnt(struct adf4350_state *st, unsigned short r_cnt)
|
|
{
|
|
struct adf4350_platform_data *pdata = st->pdata;
|
|
|
|
do {
|
|
r_cnt++;
|
|
st->fpfd = (st->clkin * (pdata->ref_doubler_en ? 2 : 1)) /
|
|
(r_cnt * (pdata->ref_div2_en ? 2 : 1));
|
|
} while (st->fpfd > ADF4350_MAX_FREQ_PFD);
|
|
|
|
return r_cnt;
|
|
}
|
|
|
|
static int adf4350_set_freq(struct adf4350_state *st, unsigned long long freq)
|
|
{
|
|
struct adf4350_platform_data *pdata = st->pdata;
|
|
u64 tmp;
|
|
u32 div_gcd, prescaler, chspc;
|
|
u16 mdiv, r_cnt = 0;
|
|
u8 band_sel_div;
|
|
|
|
if (freq > ADF4350_MAX_OUT_FREQ || freq < st->min_out_freq)
|
|
return -EINVAL;
|
|
|
|
if (freq > ADF4350_MAX_FREQ_45_PRESC) {
|
|
prescaler = ADF4350_REG1_PRESCALER;
|
|
mdiv = 75;
|
|
} else {
|
|
prescaler = 0;
|
|
mdiv = 23;
|
|
}
|
|
|
|
st->r4_rf_div_sel = 0;
|
|
|
|
while (freq < ADF4350_MIN_VCO_FREQ) {
|
|
freq <<= 1;
|
|
st->r4_rf_div_sel++;
|
|
}
|
|
|
|
/*
|
|
* Allow a predefined reference division factor
|
|
* if not set, compute our own
|
|
*/
|
|
if (pdata->ref_div_factor)
|
|
r_cnt = pdata->ref_div_factor - 1;
|
|
|
|
chspc = st->chspc;
|
|
|
|
do {
|
|
do {
|
|
do {
|
|
r_cnt = adf4350_tune_r_cnt(st, r_cnt);
|
|
st->r1_mod = st->fpfd / chspc;
|
|
if (r_cnt > ADF4350_MAX_R_CNT) {
|
|
/* try higher spacing values */
|
|
chspc++;
|
|
r_cnt = 0;
|
|
}
|
|
} while ((st->r1_mod > ADF4350_MAX_MODULUS) && r_cnt);
|
|
} while (r_cnt == 0);
|
|
|
|
tmp = freq * (u64)st->r1_mod + (st->fpfd >> 1);
|
|
do_div(tmp, st->fpfd); /* Div round closest (n + d/2)/d */
|
|
st->r0_fract = do_div(tmp, st->r1_mod);
|
|
st->r0_int = tmp;
|
|
} while (mdiv > st->r0_int);
|
|
|
|
band_sel_div = DIV_ROUND_UP(st->fpfd, ADF4350_MAX_BANDSEL_CLK);
|
|
|
|
if (st->r0_fract && st->r1_mod) {
|
|
div_gcd = gcd(st->r1_mod, st->r0_fract);
|
|
st->r1_mod /= div_gcd;
|
|
st->r0_fract /= div_gcd;
|
|
} else {
|
|
st->r0_fract = 0;
|
|
st->r1_mod = 1;
|
|
}
|
|
|
|
dev_dbg(&st->spi->dev, "VCO: %llu Hz, PFD %lu Hz\n"
|
|
"REF_DIV %d, R0_INT %d, R0_FRACT %d\n"
|
|
"R1_MOD %d, RF_DIV %d\nPRESCALER %s, BAND_SEL_DIV %d\n",
|
|
freq, st->fpfd, r_cnt, st->r0_int, st->r0_fract, st->r1_mod,
|
|
1 << st->r4_rf_div_sel, prescaler ? "8/9" : "4/5",
|
|
band_sel_div);
|
|
|
|
st->regs[ADF4350_REG0] = ADF4350_REG0_INT(st->r0_int) |
|
|
ADF4350_REG0_FRACT(st->r0_fract);
|
|
|
|
st->regs[ADF4350_REG1] = ADF4350_REG1_PHASE(1) |
|
|
ADF4350_REG1_MOD(st->r1_mod) |
|
|
prescaler;
|
|
|
|
st->regs[ADF4350_REG2] =
|
|
ADF4350_REG2_10BIT_R_CNT(r_cnt) |
|
|
ADF4350_REG2_DOUBLE_BUFF_EN |
|
|
(pdata->ref_doubler_en ? ADF4350_REG2_RMULT2_EN : 0) |
|
|
(pdata->ref_div2_en ? ADF4350_REG2_RDIV2_EN : 0) |
|
|
(pdata->r2_user_settings & (ADF4350_REG2_PD_POLARITY_POS |
|
|
ADF4350_REG2_LDP_6ns | ADF4350_REG2_LDF_INT_N |
|
|
ADF4350_REG2_CHARGE_PUMP_CURR_uA(5000) |
|
|
ADF4350_REG2_MUXOUT(0x7) | ADF4350_REG2_NOISE_MODE(0x3)));
|
|
|
|
st->regs[ADF4350_REG3] = pdata->r3_user_settings &
|
|
(ADF4350_REG3_12BIT_CLKDIV(0xFFF) |
|
|
ADF4350_REG3_12BIT_CLKDIV_MODE(0x3) |
|
|
ADF4350_REG3_12BIT_CSR_EN |
|
|
ADF4351_REG3_CHARGE_CANCELLATION_EN |
|
|
ADF4351_REG3_ANTI_BACKLASH_3ns_EN |
|
|
ADF4351_REG3_BAND_SEL_CLOCK_MODE_HIGH);
|
|
|
|
st->regs[ADF4350_REG4] =
|
|
ADF4350_REG4_FEEDBACK_FUND |
|
|
ADF4350_REG4_RF_DIV_SEL(st->r4_rf_div_sel) |
|
|
ADF4350_REG4_8BIT_BAND_SEL_CLKDIV(band_sel_div) |
|
|
ADF4350_REG4_RF_OUT_EN |
|
|
(pdata->r4_user_settings &
|
|
(ADF4350_REG4_OUTPUT_PWR(0x3) |
|
|
ADF4350_REG4_AUX_OUTPUT_PWR(0x3) |
|
|
ADF4350_REG4_AUX_OUTPUT_EN |
|
|
ADF4350_REG4_AUX_OUTPUT_FUND |
|
|
ADF4350_REG4_MUTE_TILL_LOCK_EN));
|
|
|
|
st->regs[ADF4350_REG5] = ADF4350_REG5_LD_PIN_MODE_DIGITAL;
|
|
st->freq_req = freq;
|
|
|
|
return adf4350_sync_config(st);
|
|
}
|
|
|
|
static ssize_t adf4350_write(struct iio_dev *indio_dev,
|
|
uintptr_t private,
|
|
const struct iio_chan_spec *chan,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct adf4350_state *st = iio_priv(indio_dev);
|
|
unsigned long long readin;
|
|
unsigned long tmp;
|
|
int ret;
|
|
|
|
ret = kstrtoull(buf, 10, &readin);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_lock(&indio_dev->mlock);
|
|
switch ((u32)private) {
|
|
case ADF4350_FREQ:
|
|
ret = adf4350_set_freq(st, readin);
|
|
break;
|
|
case ADF4350_FREQ_REFIN:
|
|
if (readin > ADF4350_MAX_FREQ_REFIN) {
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
if (st->clk) {
|
|
tmp = clk_round_rate(st->clk, readin);
|
|
if (tmp != readin) {
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
ret = clk_set_rate(st->clk, tmp);
|
|
if (ret < 0)
|
|
break;
|
|
}
|
|
st->clkin = readin;
|
|
ret = adf4350_set_freq(st, st->freq_req);
|
|
break;
|
|
case ADF4350_FREQ_RESOLUTION:
|
|
if (readin == 0)
|
|
ret = -EINVAL;
|
|
else
|
|
st->chspc = readin;
|
|
break;
|
|
case ADF4350_PWRDOWN:
|
|
if (readin)
|
|
st->regs[ADF4350_REG2] |= ADF4350_REG2_POWER_DOWN_EN;
|
|
else
|
|
st->regs[ADF4350_REG2] &= ~ADF4350_REG2_POWER_DOWN_EN;
|
|
|
|
adf4350_sync_config(st);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
mutex_unlock(&indio_dev->mlock);
|
|
|
|
return ret ? ret : len;
|
|
}
|
|
|
|
static ssize_t adf4350_read(struct iio_dev *indio_dev,
|
|
uintptr_t private,
|
|
const struct iio_chan_spec *chan,
|
|
char *buf)
|
|
{
|
|
struct adf4350_state *st = iio_priv(indio_dev);
|
|
unsigned long long val;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&indio_dev->mlock);
|
|
switch ((u32)private) {
|
|
case ADF4350_FREQ:
|
|
val = (u64)((st->r0_int * st->r1_mod) + st->r0_fract) *
|
|
(u64)st->fpfd;
|
|
do_div(val, st->r1_mod * (1 << st->r4_rf_div_sel));
|
|
/* PLL unlocked? return error */
|
|
if (gpio_is_valid(st->pdata->gpio_lock_detect))
|
|
if (!gpio_get_value(st->pdata->gpio_lock_detect)) {
|
|
dev_dbg(&st->spi->dev, "PLL un-locked\n");
|
|
ret = -EBUSY;
|
|
}
|
|
break;
|
|
case ADF4350_FREQ_REFIN:
|
|
if (st->clk)
|
|
st->clkin = clk_get_rate(st->clk);
|
|
|
|
val = st->clkin;
|
|
break;
|
|
case ADF4350_FREQ_RESOLUTION:
|
|
val = st->chspc;
|
|
break;
|
|
case ADF4350_PWRDOWN:
|
|
val = !!(st->regs[ADF4350_REG2] & ADF4350_REG2_POWER_DOWN_EN);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
val = 0;
|
|
}
|
|
mutex_unlock(&indio_dev->mlock);
|
|
|
|
return ret < 0 ? ret : sprintf(buf, "%llu\n", val);
|
|
}
|
|
|
|
#define _ADF4350_EXT_INFO(_name, _ident) { \
|
|
.name = _name, \
|
|
.read = adf4350_read, \
|
|
.write = adf4350_write, \
|
|
.private = _ident, \
|
|
.shared = IIO_SEPARATE, \
|
|
}
|
|
|
|
static const struct iio_chan_spec_ext_info adf4350_ext_info[] = {
|
|
/* Ideally we use IIO_CHAN_INFO_FREQUENCY, but there are
|
|
* values > 2^32 in order to support the entire frequency range
|
|
* in Hz. Using scale is a bit ugly.
|
|
*/
|
|
_ADF4350_EXT_INFO("frequency", ADF4350_FREQ),
|
|
_ADF4350_EXT_INFO("frequency_resolution", ADF4350_FREQ_RESOLUTION),
|
|
_ADF4350_EXT_INFO("refin_frequency", ADF4350_FREQ_REFIN),
|
|
_ADF4350_EXT_INFO("powerdown", ADF4350_PWRDOWN),
|
|
{ },
|
|
};
|
|
|
|
static const struct iio_chan_spec adf4350_chan = {
|
|
.type = IIO_ALTVOLTAGE,
|
|
.indexed = 1,
|
|
.output = 1,
|
|
.ext_info = adf4350_ext_info,
|
|
};
|
|
|
|
static const struct iio_info adf4350_info = {
|
|
.debugfs_reg_access = &adf4350_reg_access,
|
|
.driver_module = THIS_MODULE,
|
|
};
|
|
|
|
#ifdef CONFIG_OF
|
|
static struct adf4350_platform_data *adf4350_parse_dt(struct device *dev)
|
|
{
|
|
struct device_node *np = dev->of_node;
|
|
struct adf4350_platform_data *pdata;
|
|
unsigned int tmp;
|
|
int ret;
|
|
|
|
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
|
|
if (!pdata)
|
|
return NULL;
|
|
|
|
strncpy(&pdata->name[0], np->name, SPI_NAME_SIZE - 1);
|
|
|
|
tmp = 10000;
|
|
of_property_read_u32(np, "adi,channel-spacing", &tmp);
|
|
pdata->channel_spacing = tmp;
|
|
|
|
tmp = 0;
|
|
of_property_read_u32(np, "adi,power-up-frequency", &tmp);
|
|
pdata->power_up_frequency = tmp;
|
|
|
|
tmp = 0;
|
|
of_property_read_u32(np, "adi,reference-div-factor", &tmp);
|
|
pdata->ref_div_factor = tmp;
|
|
|
|
ret = of_get_gpio(np, 0);
|
|
if (ret < 0)
|
|
pdata->gpio_lock_detect = -1;
|
|
else
|
|
pdata->gpio_lock_detect = ret;
|
|
|
|
pdata->ref_doubler_en = of_property_read_bool(np,
|
|
"adi,reference-doubler-enable");
|
|
pdata->ref_div2_en = of_property_read_bool(np,
|
|
"adi,reference-div2-enable");
|
|
|
|
/* r2_user_settings */
|
|
pdata->r2_user_settings = of_property_read_bool(np,
|
|
"adi,phase-detector-polarity-positive-enable") ?
|
|
ADF4350_REG2_PD_POLARITY_POS : 0;
|
|
pdata->r2_user_settings |= of_property_read_bool(np,
|
|
"adi,lock-detect-precision-6ns-enable") ?
|
|
ADF4350_REG2_LDP_6ns : 0;
|
|
pdata->r2_user_settings |= of_property_read_bool(np,
|
|
"adi,lock-detect-function-integer-n-enable") ?
|
|
ADF4350_REG2_LDF_INT_N : 0;
|
|
|
|
tmp = 2500;
|
|
of_property_read_u32(np, "adi,charge-pump-current", &tmp);
|
|
pdata->r2_user_settings |= ADF4350_REG2_CHARGE_PUMP_CURR_uA(tmp);
|
|
|
|
tmp = 0;
|
|
of_property_read_u32(np, "adi,muxout-select", &tmp);
|
|
pdata->r2_user_settings |= ADF4350_REG2_MUXOUT(tmp);
|
|
|
|
pdata->r2_user_settings |= of_property_read_bool(np,
|
|
"adi,low-spur-mode-enable") ?
|
|
ADF4350_REG2_NOISE_MODE(0x3) : 0;
|
|
|
|
/* r3_user_settings */
|
|
|
|
pdata->r3_user_settings = of_property_read_bool(np,
|
|
"adi,cycle-slip-reduction-enable") ?
|
|
ADF4350_REG3_12BIT_CSR_EN : 0;
|
|
pdata->r3_user_settings |= of_property_read_bool(np,
|
|
"adi,charge-cancellation-enable") ?
|
|
ADF4351_REG3_CHARGE_CANCELLATION_EN : 0;
|
|
|
|
pdata->r3_user_settings |= of_property_read_bool(np,
|
|
"adi,anti-backlash-3ns-enable") ?
|
|
ADF4351_REG3_ANTI_BACKLASH_3ns_EN : 0;
|
|
pdata->r3_user_settings |= of_property_read_bool(np,
|
|
"adi,band-select-clock-mode-high-enable") ?
|
|
ADF4351_REG3_BAND_SEL_CLOCK_MODE_HIGH : 0;
|
|
|
|
tmp = 0;
|
|
of_property_read_u32(np, "adi,12bit-clk-divider", &tmp);
|
|
pdata->r3_user_settings |= ADF4350_REG3_12BIT_CLKDIV(tmp);
|
|
|
|
tmp = 0;
|
|
of_property_read_u32(np, "adi,clk-divider-mode", &tmp);
|
|
pdata->r3_user_settings |= ADF4350_REG3_12BIT_CLKDIV_MODE(tmp);
|
|
|
|
/* r4_user_settings */
|
|
|
|
pdata->r4_user_settings = of_property_read_bool(np,
|
|
"adi,aux-output-enable") ?
|
|
ADF4350_REG4_AUX_OUTPUT_EN : 0;
|
|
pdata->r4_user_settings |= of_property_read_bool(np,
|
|
"adi,aux-output-fundamental-enable") ?
|
|
ADF4350_REG4_AUX_OUTPUT_FUND : 0;
|
|
pdata->r4_user_settings |= of_property_read_bool(np,
|
|
"adi,mute-till-lock-enable") ?
|
|
ADF4350_REG4_MUTE_TILL_LOCK_EN : 0;
|
|
|
|
tmp = 0;
|
|
of_property_read_u32(np, "adi,output-power", &tmp);
|
|
pdata->r4_user_settings |= ADF4350_REG4_OUTPUT_PWR(tmp);
|
|
|
|
tmp = 0;
|
|
of_property_read_u32(np, "adi,aux-output-power", &tmp);
|
|
pdata->r4_user_settings |= ADF4350_REG4_AUX_OUTPUT_PWR(tmp);
|
|
|
|
return pdata;
|
|
}
|
|
#else
|
|
static
|
|
struct adf4350_platform_data *adf4350_parse_dt(struct device *dev)
|
|
{
|
|
return NULL;
|
|
}
|
|
#endif
|
|
|
|
static int adf4350_probe(struct spi_device *spi)
|
|
{
|
|
struct adf4350_platform_data *pdata;
|
|
struct iio_dev *indio_dev;
|
|
struct adf4350_state *st;
|
|
struct clk *clk = NULL;
|
|
int ret;
|
|
|
|
if (spi->dev.of_node) {
|
|
pdata = adf4350_parse_dt(&spi->dev);
|
|
if (pdata == NULL)
|
|
return -EINVAL;
|
|
} else {
|
|
pdata = spi->dev.platform_data;
|
|
}
|
|
|
|
if (!pdata) {
|
|
dev_warn(&spi->dev, "no platform data? using default\n");
|
|
pdata = &default_pdata;
|
|
}
|
|
|
|
if (!pdata->clkin) {
|
|
clk = devm_clk_get(&spi->dev, "clkin");
|
|
if (IS_ERR(clk))
|
|
return -EPROBE_DEFER;
|
|
|
|
ret = clk_prepare_enable(clk);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
|
|
if (indio_dev == NULL) {
|
|
ret = -ENOMEM;
|
|
goto error_disable_clk;
|
|
}
|
|
|
|
st = iio_priv(indio_dev);
|
|
|
|
st->reg = devm_regulator_get(&spi->dev, "vcc");
|
|
if (!IS_ERR(st->reg)) {
|
|
ret = regulator_enable(st->reg);
|
|
if (ret)
|
|
goto error_disable_clk;
|
|
}
|
|
|
|
spi_set_drvdata(spi, indio_dev);
|
|
st->spi = spi;
|
|
st->pdata = pdata;
|
|
|
|
indio_dev->dev.parent = &spi->dev;
|
|
indio_dev->name = (pdata->name[0] != 0) ? pdata->name :
|
|
spi_get_device_id(spi)->name;
|
|
|
|
indio_dev->info = &adf4350_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = &adf4350_chan;
|
|
indio_dev->num_channels = 1;
|
|
|
|
st->chspc = pdata->channel_spacing;
|
|
if (clk) {
|
|
st->clk = clk;
|
|
st->clkin = clk_get_rate(clk);
|
|
} else {
|
|
st->clkin = pdata->clkin;
|
|
}
|
|
|
|
st->min_out_freq = spi_get_device_id(spi)->driver_data == 4351 ?
|
|
ADF4351_MIN_OUT_FREQ : ADF4350_MIN_OUT_FREQ;
|
|
|
|
memset(st->regs_hw, 0xFF, sizeof(st->regs_hw));
|
|
|
|
if (gpio_is_valid(pdata->gpio_lock_detect)) {
|
|
ret = devm_gpio_request(&spi->dev, pdata->gpio_lock_detect,
|
|
indio_dev->name);
|
|
if (ret) {
|
|
dev_err(&spi->dev, "fail to request lock detect GPIO-%d",
|
|
pdata->gpio_lock_detect);
|
|
goto error_disable_reg;
|
|
}
|
|
gpio_direction_input(pdata->gpio_lock_detect);
|
|
}
|
|
|
|
if (pdata->power_up_frequency) {
|
|
ret = adf4350_set_freq(st, pdata->power_up_frequency);
|
|
if (ret)
|
|
goto error_disable_reg;
|
|
}
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret)
|
|
goto error_disable_reg;
|
|
|
|
return 0;
|
|
|
|
error_disable_reg:
|
|
if (!IS_ERR(st->reg))
|
|
regulator_disable(st->reg);
|
|
error_disable_clk:
|
|
if (clk)
|
|
clk_disable_unprepare(clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int adf4350_remove(struct spi_device *spi)
|
|
{
|
|
struct iio_dev *indio_dev = spi_get_drvdata(spi);
|
|
struct adf4350_state *st = iio_priv(indio_dev);
|
|
struct regulator *reg = st->reg;
|
|
|
|
st->regs[ADF4350_REG2] |= ADF4350_REG2_POWER_DOWN_EN;
|
|
adf4350_sync_config(st);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
|
|
if (st->clk)
|
|
clk_disable_unprepare(st->clk);
|
|
|
|
if (!IS_ERR(reg))
|
|
regulator_disable(reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id adf4350_of_match[] = {
|
|
{ .compatible = "adi,adf4350", },
|
|
{ .compatible = "adi,adf4351", },
|
|
{ /* sentinel */ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, adf4350_of_match);
|
|
|
|
static const struct spi_device_id adf4350_id[] = {
|
|
{"adf4350", 4350},
|
|
{"adf4351", 4351},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, adf4350_id);
|
|
|
|
static struct spi_driver adf4350_driver = {
|
|
.driver = {
|
|
.name = "adf4350",
|
|
.of_match_table = of_match_ptr(adf4350_of_match),
|
|
},
|
|
.probe = adf4350_probe,
|
|
.remove = adf4350_remove,
|
|
.id_table = adf4350_id,
|
|
};
|
|
module_spi_driver(adf4350_driver);
|
|
|
|
MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
|
|
MODULE_DESCRIPTION("Analog Devices ADF4350/ADF4351 PLL");
|
|
MODULE_LICENSE("GPL v2");
|