AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-04 13:16:53 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
c7da82b894
linux_dsm_epyc7002/arch/sparc/mm/fault_64.c
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

546 lines
14 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* arch/sparc64/mm/fault.c: Page fault handlers for the 64-bit Sparc.
*
* Copyright (C) 1996, 2008 David S. Miller (davem@davemloft.net)
* Copyright (C) 1997, 1999 Jakub Jelinek (jj@ultra.linux.cz)
*/
#include <asm/head.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/sched.h>
#include <linux/sched/debug.h>
#include <linux/ptrace.h>
#include <linux/mman.h>
#include <linux/signal.h>
#include <linux/mm.h>
#include <linux/extable.h>
#include <linux/init.h>
#include <linux/perf_event.h>
#include <linux/interrupt.h>
#include <linux/kprobes.h>
#include <linux/kdebug.h>
#include <linux/percpu.h>
#include <linux/context_tracking.h>
#include <linux/uaccess.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/openprom.h>
#include <asm/oplib.h>
#include <asm/asi.h>
#include <asm/lsu.h>
#include <asm/sections.h>
#include <asm/mmu_context.h>
#include <asm/setup.h>
int show_unhandled_signals = 1;
static inline __kprobes int notify_page_fault(struct pt_regs *regs)
{
int ret = 0;
/* kprobe_running() needs smp_processor_id() */
if (kprobes_built_in() && !user_mode(regs)) {
preempt_disable();
if (kprobe_running() && kprobe_fault_handler(regs, 0))
ret = 1;
preempt_enable();
}
return ret;
}
static void __kprobes unhandled_fault(unsigned long address,
struct task_struct *tsk,
struct pt_regs *regs)
{
if ((unsigned long) address < PAGE_SIZE) {
printk(KERN_ALERT "Unable to handle kernel NULL "
"pointer dereference\n");
} else {
printk(KERN_ALERT "Unable to handle kernel paging request "
"at virtual address %016lx\n", (unsigned long)address);
}
printk(KERN_ALERT "tsk->{mm,active_mm}->context = %016lx\n",
(tsk->mm ?
CTX_HWBITS(tsk->mm->context) :
CTX_HWBITS(tsk->active_mm->context)));
printk(KERN_ALERT "tsk->{mm,active_mm}->pgd = %016lx\n",
(tsk->mm ? (unsigned long) tsk->mm->pgd :
(unsigned long) tsk->active_mm->pgd));
die_if_kernel("Oops", regs);
}
static void __kprobes bad_kernel_pc(struct pt_regs *regs, unsigned long vaddr)
{
printk(KERN_CRIT "OOPS: Bogus kernel PC [%016lx] in fault handler\n",
regs->tpc);
printk(KERN_CRIT "OOPS: RPC [%016lx]\n", regs->u_regs[15]);
printk("OOPS: RPC <%pS>\n", (void *) regs->u_regs[15]);
printk(KERN_CRIT "OOPS: Fault was to vaddr[%lx]\n", vaddr);
dump_stack();
unhandled_fault(regs->tpc, current, regs);
}
/*
* We now make sure that mmap_sem is held in all paths that call
* this. Additionally, to prevent kswapd from ripping ptes from
* under us, raise interrupts around the time that we look at the
* pte, kswapd will have to wait to get his smp ipi response from
* us. vmtruncate likewise. This saves us having to get pte lock.
*/
static unsigned int get_user_insn(unsigned long tpc)
{
pgd_t *pgdp = pgd_offset(current->mm, tpc);
pud_t *pudp;
pmd_t *pmdp;
pte_t *ptep, pte;
unsigned long pa;
u32 insn = 0;
if (pgd_none(*pgdp) || unlikely(pgd_bad(*pgdp)))
goto out;
pudp = pud_offset(pgdp, tpc);
if (pud_none(*pudp) || unlikely(pud_bad(*pudp)))
goto out;
/* This disables preemption for us as well. */
local_irq_disable();
pmdp = pmd_offset(pudp, tpc);
if (pmd_none(*pmdp) || unlikely(pmd_bad(*pmdp)))
goto out_irq_enable;
#if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)
if (is_hugetlb_pmd(*pmdp)) {
pa = pmd_pfn(*pmdp) << PAGE_SHIFT;
pa += tpc & ~HPAGE_MASK;
/* Use phys bypass so we don't pollute dtlb/dcache. */
__asm__ __volatile__("lduwa [%1] %2, %0"
: "=r" (insn)
: "r" (pa), "i" (ASI_PHYS_USE_EC));
} else
#endif
{
ptep = pte_offset_map(pmdp, tpc);
pte = *ptep;
if (pte_present(pte)) {
pa = (pte_pfn(pte) << PAGE_SHIFT);
pa += (tpc & ~PAGE_MASK);
/* Use phys bypass so we don't pollute dtlb/dcache. */
__asm__ __volatile__("lduwa [%1] %2, %0"
: "=r" (insn)
: "r" (pa), "i" (ASI_PHYS_USE_EC));
}
pte_unmap(ptep);
}
out_irq_enable:
local_irq_enable();
out:
return insn;
}
static inline void
show_signal_msg(struct pt_regs *regs, int sig, int code,
unsigned long address, struct task_struct *tsk)
{
if (!unhandled_signal(tsk, sig))
return;
if (!printk_ratelimit())
return;
printk("%s%s[%d]: segfault at %lx ip %p (rpc %p) sp %p error %x",
task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG,
tsk->comm, task_pid_nr(tsk), address,
(void *)regs->tpc, (void *)regs->u_regs[UREG_I7],
(void *)regs->u_regs[UREG_FP], code);
print_vma_addr(KERN_CONT " in ", regs->tpc);
printk(KERN_CONT "\n");
}
static void do_fault_siginfo(int code, int sig, struct pt_regs *regs,
unsigned long fault_addr, unsigned int insn,
int fault_code)
{
unsigned long addr;
siginfo_t info;
info.si_code = code;
info.si_signo = sig;
info.si_errno = 0;
if (fault_code & FAULT_CODE_ITLB) {
addr = regs->tpc;
} else {
/* If we were able to probe the faulting instruction, use it
* to compute a precise fault address. Otherwise use the fault
* time provided address which may only have page granularity.
*/
if (insn)
addr = compute_effective_address(regs, insn, 0);
else
addr = fault_addr;
}
info.si_addr = (void __user *) addr;
info.si_trapno = 0;
if (unlikely(show_unhandled_signals))
show_signal_msg(regs, sig, code, addr, current);
force_sig_info(sig, &info, current);
}
static unsigned int get_fault_insn(struct pt_regs *regs, unsigned int insn)
{
if (!insn) {
if (!regs->tpc || (regs->tpc & 0x3))
return 0;
if (regs->tstate & TSTATE_PRIV) {
insn = *(unsigned int *) regs->tpc;
} else {
insn = get_user_insn(regs->tpc);
}
}
return insn;
}
static void __kprobes do_kernel_fault(struct pt_regs *regs, int si_code,
int fault_code, unsigned int insn,
unsigned long address)
{
unsigned char asi = ASI_P;
if ((!insn) && (regs->tstate & TSTATE_PRIV))
goto cannot_handle;
/* If user insn could be read (thus insn is zero), that
* is fine. We will just gun down the process with a signal
* in that case.
*/
if (!(fault_code & (FAULT_CODE_WRITE|FAULT_CODE_ITLB)) &&
(insn & 0xc0800000) == 0xc0800000) {
if (insn & 0x2000)
asi = (regs->tstate >> 24);
else
asi = (insn >> 5);
if ((asi & 0xf2) == 0x82) {
if (insn & 0x1000000) {
handle_ldf_stq(insn, regs);
} else {
/* This was a non-faulting load. Just clear the
* destination register(s) and continue with the next
* instruction. -jj
*/
handle_ld_nf(insn, regs);
}
return;
}
}
/* Is this in ex_table? */
if (regs->tstate & TSTATE_PRIV) {
const struct exception_table_entry *entry;
entry = search_exception_tables(regs->tpc);
if (entry) {
regs->tpc = entry->fixup;
regs->tnpc = regs->tpc + 4;
return;
}
} else {
/* The si_code was set to make clear whether
* this was a SEGV_MAPERR or SEGV_ACCERR fault.
*/
do_fault_siginfo(si_code, SIGSEGV, regs, address, insn, fault_code);
return;
}
cannot_handle:
unhandled_fault (address, current, regs);
}
static void noinline __kprobes bogus_32bit_fault_tpc(struct pt_regs *regs)
{
static int times;
if (times++ < 10)
printk(KERN_ERR "FAULT[%s:%d]: 32-bit process reports "
"64-bit TPC [%lx]\n",
current->comm, current->pid,
regs->tpc);
show_regs(regs);
}
asmlinkage void __kprobes do_sparc64_fault(struct pt_regs *regs)
{
enum ctx_state prev_state = exception_enter();
struct mm_struct *mm = current->mm;
struct vm_area_struct *vma;
unsigned int insn = 0;
int si_code, fault_code, fault;
unsigned long address, mm_rss;
unsigned int flags = FAULT_FLAG_ALLOW_RETRY | FAULT_FLAG_KILLABLE;
fault_code = get_thread_fault_code();
if (notify_page_fault(regs))
goto exit_exception;
si_code = SEGV_MAPERR;
address = current_thread_info()->fault_address;
if ((fault_code & FAULT_CODE_ITLB) &&
(fault_code & FAULT_CODE_DTLB))
BUG();
if (test_thread_flag(TIF_32BIT)) {
if (!(regs->tstate & TSTATE_PRIV)) {
if (unlikely((regs->tpc >> 32) != 0)) {
bogus_32bit_fault_tpc(regs);
goto intr_or_no_mm;
}
}
if (unlikely((address >> 32) != 0))
goto intr_or_no_mm;
}
if (regs->tstate & TSTATE_PRIV) {
unsigned long tpc = regs->tpc;
/* Sanity check the PC. */
if ((tpc >= KERNBASE && tpc < (unsigned long) __init_end) ||
(tpc >= MODULES_VADDR && tpc < MODULES_END)) {
/* Valid, no problems... */
} else {
bad_kernel_pc(regs, address);
goto exit_exception;
}
} else
flags |= FAULT_FLAG_USER;
/*
* If we're in an interrupt or have no user
* context, we must not take the fault..
*/
if (faulthandler_disabled() || !mm)
goto intr_or_no_mm;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS, 1, regs, address);
if (!down_read_trylock(&mm->mmap_sem)) {
if ((regs->tstate & TSTATE_PRIV) &&
!search_exception_tables(regs->tpc)) {
insn = get_fault_insn(regs, insn);
goto handle_kernel_fault;
}
retry:
down_read(&mm->mmap_sem);
}
if (fault_code & FAULT_CODE_BAD_RA)
goto do_sigbus;
vma = find_vma(mm, address);
if (!vma)
goto bad_area;
/* Pure DTLB misses do not tell us whether the fault causing
* load/store/atomic was a write or not, it only says that there
* was no match. So in such a case we (carefully) read the
* instruction to try and figure this out. It's an optimization
* so it's ok if we can't do this.
*
* Special hack, window spill/fill knows the exact fault type.
*/
if (((fault_code &
(FAULT_CODE_DTLB | FAULT_CODE_WRITE | FAULT_CODE_WINFIXUP)) == FAULT_CODE_DTLB) &&
(vma->vm_flags & VM_WRITE) != 0) {
insn = get_fault_insn(regs, 0);
if (!insn)
goto continue_fault;
/* All loads, stores and atomics have bits 30 and 31 both set
* in the instruction. Bit 21 is set in all stores, but we
* have to avoid prefetches which also have bit 21 set.
*/
if ((insn & 0xc0200000) == 0xc0200000 &&
(insn & 0x01780000) != 0x01680000) {
/* Don't bother updating thread struct value,
* because update_mmu_cache only cares which tlb
* the access came from.
*/
fault_code |= FAULT_CODE_WRITE;
}
}
continue_fault:
if (vma->vm_start <= address)
goto good_area;
if (!(vma->vm_flags & VM_GROWSDOWN))
goto bad_area;
if (!(fault_code & FAULT_CODE_WRITE)) {
/* Non-faulting loads shouldn't expand stack. */
insn = get_fault_insn(regs, insn);
if ((insn & 0xc0800000) == 0xc0800000) {
unsigned char asi;
if (insn & 0x2000)
asi = (regs->tstate >> 24);
else
asi = (insn >> 5);
if ((asi & 0xf2) == 0x82)
goto bad_area;
}
}
if (expand_stack(vma, address))
goto bad_area;
/*
* Ok, we have a good vm_area for this memory access, so
* we can handle it..
*/
good_area:
si_code = SEGV_ACCERR;
/* If we took a ITLB miss on a non-executable page, catch
* that here.
*/
if ((fault_code & FAULT_CODE_ITLB) && !(vma->vm_flags & VM_EXEC)) {
WARN(address != regs->tpc,
"address (%lx) != regs->tpc (%lx)\n", address, regs->tpc);
WARN_ON(regs->tstate & TSTATE_PRIV);
goto bad_area;
}
if (fault_code & FAULT_CODE_WRITE) {
if (!(vma->vm_flags & VM_WRITE))
goto bad_area;
/* Spitfire has an icache which does not snoop
* processor stores. Later processors do...
*/
if (tlb_type == spitfire &&
(vma->vm_flags & VM_EXEC) != 0 &&
vma->vm_file != NULL)
set_thread_fault_code(fault_code |
FAULT_CODE_BLKCOMMIT);
flags |= FAULT_FLAG_WRITE;
} else {
/* Allow reads even for write-only mappings */
if (!(vma->vm_flags & (VM_READ | VM_EXEC)))
goto bad_area;
}
fault = handle_mm_fault(vma, address, flags);
if ((fault & VM_FAULT_RETRY) && fatal_signal_pending(current))
goto exit_exception;
if (unlikely(fault & VM_FAULT_ERROR)) {
if (fault & VM_FAULT_OOM)
goto out_of_memory;
else if (fault & VM_FAULT_SIGSEGV)
goto bad_area;
else if (fault & VM_FAULT_SIGBUS)
goto do_sigbus;
BUG();
}
if (flags & FAULT_FLAG_ALLOW_RETRY) {
if (fault & VM_FAULT_MAJOR) {
current->maj_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MAJ,
1, regs, address);
} else {
current->min_flt++;
perf_sw_event(PERF_COUNT_SW_PAGE_FAULTS_MIN,
1, regs, address);
}
if (fault & VM_FAULT_RETRY) {
flags &= ~FAULT_FLAG_ALLOW_RETRY;
flags |= FAULT_FLAG_TRIED;
/* No need to up_read(&mm->mmap_sem) as we would
* have already released it in __lock_page_or_retry
* in mm/filemap.c.
*/
goto retry;
}
}
up_read(&mm->mmap_sem);
mm_rss = get_mm_rss(mm);
#if defined(CONFIG_TRANSPARENT_HUGEPAGE)
mm_rss -= (mm->context.thp_pte_count * (HPAGE_SIZE / PAGE_SIZE));
#endif
if (unlikely(mm_rss >
mm->context.tsb_block[MM_TSB_BASE].tsb_rss_limit))
tsb_grow(mm, MM_TSB_BASE, mm_rss);
#if defined(CONFIG_HUGETLB_PAGE) || defined(CONFIG_TRANSPARENT_HUGEPAGE)
mm_rss = mm->context.hugetlb_pte_count + mm->context.thp_pte_count;
mm_rss *= REAL_HPAGE_PER_HPAGE;
if (unlikely(mm_rss >
mm->context.tsb_block[MM_TSB_HUGE].tsb_rss_limit)) {
if (mm->context.tsb_block[MM_TSB_HUGE].tsb)
tsb_grow(mm, MM_TSB_HUGE, mm_rss);
else
hugetlb_setup(regs);
}
#endif
exit_exception:
exception_exit(prev_state);
return;
/*
* Something tried to access memory that isn't in our memory map..
* Fix it, but check if it's kernel or user first..
*/
bad_area:
insn = get_fault_insn(regs, insn);
up_read(&mm->mmap_sem);
handle_kernel_fault:
do_kernel_fault(regs, si_code, fault_code, insn, address);
goto exit_exception;
/*
* We ran out of memory, or some other thing happened to us that made
* us unable to handle the page fault gracefully.
*/
out_of_memory:
insn = get_fault_insn(regs, insn);
up_read(&mm->mmap_sem);
if (!(regs->tstate & TSTATE_PRIV)) {
pagefault_out_of_memory();
goto exit_exception;
}
goto handle_kernel_fault;
intr_or_no_mm:
insn = get_fault_insn(regs, 0);
goto handle_kernel_fault;
do_sigbus:
insn = get_fault_insn(regs, insn);
up_read(&mm->mmap_sem);
/*
* Send a sigbus, regardless of whether we were in kernel
* or user mode.
*/
do_fault_siginfo(BUS_ADRERR, SIGBUS, regs, address, insn, fault_code);
/* Kernel mode? Handle exceptions or die */
if (regs->tstate & TSTATE_PRIV)
goto handle_kernel_fault;
}
Reference in New Issue View Git Blame Copy Permalink