AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2025-02-11 02:15:48 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
c77fae5ba0
linux_dsm_epyc7002/arch/arm64/boot/dts/freescale
History
Ashish Kumar c77fae5ba0 arm64: dts: ls1028a: Add FlexSPI support 
Add fspi node property for LS1028A SoC for FlexSPI driver.
Property added for FlexSPI controller and for the connected
slave device for the LS1028ARDB and LS1028AQDS target.
RDB and QDS are having one SPI-NOR flash device, mt35xu02g
connected at CS0.
This flash device "mt35xu02g" is tested for octal read

Signed-off-by: Xiaowei Bao <xiaowei.bao@nxp.com>
Signed-off-by: Ashish Kumar <Ashish.Kumar@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2019-12-11 11:13:21 +08:00
..
fsl-ls208xa-qds.dtsi arm64: dts: Add spi-[tx/rx]-bus-width for the FSL QSPI controller 2018-12-16 16:24:01 +08:00
fsl-ls208xa-rdb.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls208xa.dtsi pci-v5.4-changes 2019-09-23 19:16:01 -07:00
fsl-ls1012a-frdm.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls1012a-frwy.dts arm64: dts: ls1012a: Add FRWY-LS1012A board support 2018-12-08 10:28:37 +08:00
fsl-ls1012a-oxalis.dts arm64: dts: freescale: Enable PCI-E controller for Oxalis board 2019-03-20 20:58:26 +08:00
fsl-ls1012a-qds.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls1012a-rdb.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls1012a.dtsi pci-v5.4-changes 2019-09-23 19:16:01 -07:00
fsl-ls1028a-qds.dts arm64: dts: ls1028a: Add FlexSPI support 2019-12-11 11:13:21 +08:00
fsl-ls1028a-rdb.dts arm64: dts: ls1028a: Add FlexSPI support 2019-12-11 11:13:21 +08:00
fsl-ls1028a.dtsi arm64: dts: ls1028a: Add FlexSPI support 2019-12-11 11:13:21 +08:00
fsl-ls1043-post.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls1043a-qds.dts arm64: dts: fsl: use a generic node name for m25p80 flashes 2019-01-11 17:13:04 +08:00
fsl-ls1043a-rdb.dts arm64: dts: ls1043a: add crypto node alias also for qds 2019-03-22 10:23:37 +08:00
fsl-ls1043a.dtsi arm64: dts: fsl: Remove num-lanes property from PCIe nodes 2019-08-22 18:25:55 +01:00
fsl-ls1046-post.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls1046a-frwy.dts arm64: dts: nxp: add ls1046a-frwy board support 2019-08-03 12:28:18 +02:00
fsl-ls1046a-qds.dts arm64: dts: fsl: use a generic node name for m25p80 flashes 2019-01-11 17:13:04 +08:00
fsl-ls1046a-rdb.dts arm64: dts: enable otg mode for dwc3 usb ip on layerscape 2019-10-14 21:18:01 +08:00
fsl-ls1046a.dtsi arm64: dts: fsl: Remove num-lanes property from PCIe nodes 2019-08-22 18:25:55 +01:00
fsl-ls1088a-qds.dts arm64: dts: ls1088a-qds: Add the spi-flash nodes under the DSPI controller 2019-08-24 20:35:10 +02:00
fsl-ls1088a-rdb.dts arm64: dts: enable otg mode for dwc3 usb ip on layerscape 2019-10-14 21:18:01 +08:00
fsl-ls1088a.dtsi pci-v5.4-changes 2019-09-23 19:16:01 -07:00
fsl-ls2080a-qds.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls2080a-rdb.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls2080a-simu.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls2080a.dtsi arm64: dts: freescale: Add missing cooling device properties for CPUs 2018-07-03 15:01:09 +08:00
fsl-ls2088a-qds.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls2088a-rdb.dts arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
fsl-ls2088a.dtsi arm64: dts: layerscape: removed compatible string "snps,dw-pcie" 2018-12-08 10:28:38 +08:00
fsl-lx2160a-qds.dts arm64: dts: lx2160a: add sata node support 2019-04-11 09:34:29 +08:00
fsl-lx2160a-rdb.dts arm64: dts: lx2160a: add sata node support 2019-04-11 09:34:29 +08:00
fsl-lx2160a.dtsi LX2160A TMU support for 5.5: 2019-11-06 07:48:37 -08:00
imx8mm-evk.dts arm64: dts: imx8m: Add ddr controller nodes 2019-12-09 09:22:26 +08:00
imx8mm-pinfunc.h arm64: dts: imx8mm: Correct SAI3 RXC/TXFS pin's mux option #1 2019-07-23 14:33:40 +08:00
imx8mm.dtsi arm64: dts: imx8m: Add ddr controller nodes 2019-12-09 09:22:26 +08:00
imx8mn-ddr4-evk.dts arm64: dts: imx8m: Add ddr controller nodes 2019-12-09 09:22:26 +08:00
imx8mn-evk.dts arm64: dts: imx8mn: Add LPDDR4 EVK board support 2019-10-28 21:48:04 +08:00
imx8mn-evk.dtsi arm64: dts: imx8mn-evk: Remove invalid Atheros properties 2019-11-04 16:00:56 +08:00
imx8mn-pinfunc.h dt-bindings: imx: Add pinctrl binding doc for i.MX8MN 2019-06-25 10:39:39 +02:00
imx8mn.dtsi arm64: dts: imx8m: Add ddr controller nodes 2019-12-09 09:22:26 +08:00
imx8mq-evk.dts arm64: dts: imx8m: Add ddr controller nodes 2019-12-09 09:22:26 +08:00
imx8mq-hummingboard-pulse.dts arm64: dts: imx8mq: Move usdhc clocks assignment to board DT 2019-10-28 21:48:03 +08:00
imx8mq-librem5-devkit.dts arm64: dts: imx8mq: Move usdhc clocks assignment to board DT 2019-10-28 21:48:03 +08:00
imx8mq-nitrogen.dts arm64: dts: imx8mq: Move usdhc clocks assignment to board DT 2019-10-28 21:48:03 +08:00
imx8mq-pico-pi.dts arm64: dts: imx8mq: Move usdhc clocks assignment to board DT 2019-10-28 21:48:03 +08:00
imx8mq-pinfunc.h arm64: add basic DTS for i.MX8MQ 2018-12-16 17:28:01 +08:00
imx8mq-sr-som.dtsi arm64: dts: imx8mq: Move usdhc clocks assignment to board DT 2019-10-28 21:48:03 +08:00
imx8mq-zii-ultra-rmb3.dts arm64: dts: zii-ultra: adjust board names 2019-12-09 15:27:18 +08:00
imx8mq-zii-ultra-zest.dts arm64: dts: zii-ultra: adjust board names 2019-12-09 15:27:18 +08:00
imx8mq-zii-ultra.dtsi ARM: Device-tree updates 2019-12-05 12:09:47 -08:00
imx8mq.dtsi arm64: dts: imx8mq: add missing SAI nodes 2019-12-09 15:49:07 +08:00
imx8qxp-ai_ml.dts arm64: dts: imx8qxp: Move usdhc clocks assignment to board DT 2019-10-28 21:48:03 +08:00
imx8qxp-colibri-eval-v3.dts arm64: dts: freescale: add initial support for colibri imx8x 2019-11-04 09:28:07 +08:00
imx8qxp-colibri-eval-v3.dtsi arm64: dts: freescale: add initial support for colibri imx8x 2019-11-04 09:28:07 +08:00
imx8qxp-colibri.dtsi arm64: dts: freescale: add initial support for colibri imx8x 2019-11-04 09:28:07 +08:00
imx8qxp-mek.dts arm64: dts: imx8qxp: Move usdhc clocks assignment to board DT 2019-10-28 21:48:03 +08:00
imx8qxp.dtsi arm64: dts: imx8qxp: Remove unnecessary "interrupt-parent" property 2019-12-09 08:28:51 +08:00
Makefile arm64: dts: freescale: add initial support for colibri imx8x 2019-11-04 09:28:07 +08:00
qoriq-bman-portals.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-0.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-1.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-2.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-3.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-4.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-1g-5.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-10g-0.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0-10g-1.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
qoriq-fman3-0.dtsi ARM: Device-tree updates 2018-08-23 14:02:22 -07:00
qoriq-qman-portals.dtsi arm64: dts: freescale: Update to use SPDX identifiers 2018-06-19 11:07:47 +08:00
s32v234-evb.dts arm64: dts: fsl: Add device tree for S32V234-EVB 2019-10-28 21:48:03 +08:00
s32v234.dtsi arm64: dts: fsl: Add device tree for S32V234-EVB 2019-10-28 21:48:03 +08:00