mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-18 09:58:27 +07:00
366a543421
All actions done in `adis16480_initial_setup()` are now done in `__adis_initial_startup()` so, there's no need for code duplication. Furthermore, the call to `adis16480_initial_setup()` is done before any device configuration since the device will be reset if not already (via rst pin). This is actually fixing a potential bug since `adis_reset()` was being called after configuring the device which is obviously a problem. Signed-off-by: Nuno Sá <nuno.sa@analog.com> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
1353 lines
39 KiB
C
1353 lines
39 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* ADIS16480 and similar IMUs driver
|
|
*
|
|
* Copyright 2012 Analog Devices Inc.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/bitfield.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/imu/adis.h>
|
|
|
|
#include <linux/debugfs.h>
|
|
|
|
#define ADIS16480_PAGE_SIZE 0x80
|
|
|
|
#define ADIS16480_REG(page, reg) ((page) * ADIS16480_PAGE_SIZE + (reg))
|
|
|
|
#define ADIS16480_REG_PAGE_ID 0x00 /* Same address on each page */
|
|
#define ADIS16480_REG_SEQ_CNT ADIS16480_REG(0x00, 0x06)
|
|
#define ADIS16480_REG_SYS_E_FLA ADIS16480_REG(0x00, 0x08)
|
|
#define ADIS16480_REG_DIAG_STS ADIS16480_REG(0x00, 0x0A)
|
|
#define ADIS16480_REG_ALM_STS ADIS16480_REG(0x00, 0x0C)
|
|
#define ADIS16480_REG_TEMP_OUT ADIS16480_REG(0x00, 0x0E)
|
|
#define ADIS16480_REG_X_GYRO_OUT ADIS16480_REG(0x00, 0x10)
|
|
#define ADIS16480_REG_Y_GYRO_OUT ADIS16480_REG(0x00, 0x14)
|
|
#define ADIS16480_REG_Z_GYRO_OUT ADIS16480_REG(0x00, 0x18)
|
|
#define ADIS16480_REG_X_ACCEL_OUT ADIS16480_REG(0x00, 0x1C)
|
|
#define ADIS16480_REG_Y_ACCEL_OUT ADIS16480_REG(0x00, 0x20)
|
|
#define ADIS16480_REG_Z_ACCEL_OUT ADIS16480_REG(0x00, 0x24)
|
|
#define ADIS16480_REG_X_MAGN_OUT ADIS16480_REG(0x00, 0x28)
|
|
#define ADIS16480_REG_Y_MAGN_OUT ADIS16480_REG(0x00, 0x2A)
|
|
#define ADIS16480_REG_Z_MAGN_OUT ADIS16480_REG(0x00, 0x2C)
|
|
#define ADIS16480_REG_BAROM_OUT ADIS16480_REG(0x00, 0x2E)
|
|
#define ADIS16480_REG_X_DELTAANG_OUT ADIS16480_REG(0x00, 0x40)
|
|
#define ADIS16480_REG_Y_DELTAANG_OUT ADIS16480_REG(0x00, 0x44)
|
|
#define ADIS16480_REG_Z_DELTAANG_OUT ADIS16480_REG(0x00, 0x48)
|
|
#define ADIS16480_REG_X_DELTAVEL_OUT ADIS16480_REG(0x00, 0x4C)
|
|
#define ADIS16480_REG_Y_DELTAVEL_OUT ADIS16480_REG(0x00, 0x50)
|
|
#define ADIS16480_REG_Z_DELTAVEL_OUT ADIS16480_REG(0x00, 0x54)
|
|
#define ADIS16480_REG_PROD_ID ADIS16480_REG(0x00, 0x7E)
|
|
|
|
#define ADIS16480_REG_X_GYRO_SCALE ADIS16480_REG(0x02, 0x04)
|
|
#define ADIS16480_REG_Y_GYRO_SCALE ADIS16480_REG(0x02, 0x06)
|
|
#define ADIS16480_REG_Z_GYRO_SCALE ADIS16480_REG(0x02, 0x08)
|
|
#define ADIS16480_REG_X_ACCEL_SCALE ADIS16480_REG(0x02, 0x0A)
|
|
#define ADIS16480_REG_Y_ACCEL_SCALE ADIS16480_REG(0x02, 0x0C)
|
|
#define ADIS16480_REG_Z_ACCEL_SCALE ADIS16480_REG(0x02, 0x0E)
|
|
#define ADIS16480_REG_X_GYRO_BIAS ADIS16480_REG(0x02, 0x10)
|
|
#define ADIS16480_REG_Y_GYRO_BIAS ADIS16480_REG(0x02, 0x14)
|
|
#define ADIS16480_REG_Z_GYRO_BIAS ADIS16480_REG(0x02, 0x18)
|
|
#define ADIS16480_REG_X_ACCEL_BIAS ADIS16480_REG(0x02, 0x1C)
|
|
#define ADIS16480_REG_Y_ACCEL_BIAS ADIS16480_REG(0x02, 0x20)
|
|
#define ADIS16480_REG_Z_ACCEL_BIAS ADIS16480_REG(0x02, 0x24)
|
|
#define ADIS16480_REG_X_HARD_IRON ADIS16480_REG(0x02, 0x28)
|
|
#define ADIS16480_REG_Y_HARD_IRON ADIS16480_REG(0x02, 0x2A)
|
|
#define ADIS16480_REG_Z_HARD_IRON ADIS16480_REG(0x02, 0x2C)
|
|
#define ADIS16480_REG_BAROM_BIAS ADIS16480_REG(0x02, 0x40)
|
|
#define ADIS16480_REG_FLASH_CNT ADIS16480_REG(0x02, 0x7C)
|
|
|
|
#define ADIS16480_REG_GLOB_CMD ADIS16480_REG(0x03, 0x02)
|
|
#define ADIS16480_REG_FNCTIO_CTRL ADIS16480_REG(0x03, 0x06)
|
|
#define ADIS16480_REG_GPIO_CTRL ADIS16480_REG(0x03, 0x08)
|
|
#define ADIS16480_REG_CONFIG ADIS16480_REG(0x03, 0x0A)
|
|
#define ADIS16480_REG_DEC_RATE ADIS16480_REG(0x03, 0x0C)
|
|
#define ADIS16480_REG_SLP_CNT ADIS16480_REG(0x03, 0x10)
|
|
#define ADIS16480_REG_FILTER_BNK0 ADIS16480_REG(0x03, 0x16)
|
|
#define ADIS16480_REG_FILTER_BNK1 ADIS16480_REG(0x03, 0x18)
|
|
#define ADIS16480_REG_ALM_CNFG0 ADIS16480_REG(0x03, 0x20)
|
|
#define ADIS16480_REG_ALM_CNFG1 ADIS16480_REG(0x03, 0x22)
|
|
#define ADIS16480_REG_ALM_CNFG2 ADIS16480_REG(0x03, 0x24)
|
|
#define ADIS16480_REG_XG_ALM_MAGN ADIS16480_REG(0x03, 0x28)
|
|
#define ADIS16480_REG_YG_ALM_MAGN ADIS16480_REG(0x03, 0x2A)
|
|
#define ADIS16480_REG_ZG_ALM_MAGN ADIS16480_REG(0x03, 0x2C)
|
|
#define ADIS16480_REG_XA_ALM_MAGN ADIS16480_REG(0x03, 0x2E)
|
|
#define ADIS16480_REG_YA_ALM_MAGN ADIS16480_REG(0x03, 0x30)
|
|
#define ADIS16480_REG_ZA_ALM_MAGN ADIS16480_REG(0x03, 0x32)
|
|
#define ADIS16480_REG_XM_ALM_MAGN ADIS16480_REG(0x03, 0x34)
|
|
#define ADIS16480_REG_YM_ALM_MAGN ADIS16480_REG(0x03, 0x36)
|
|
#define ADIS16480_REG_ZM_ALM_MAGN ADIS16480_REG(0x03, 0x38)
|
|
#define ADIS16480_REG_BR_ALM_MAGN ADIS16480_REG(0x03, 0x3A)
|
|
#define ADIS16480_REG_FIRM_REV ADIS16480_REG(0x03, 0x78)
|
|
#define ADIS16480_REG_FIRM_DM ADIS16480_REG(0x03, 0x7A)
|
|
#define ADIS16480_REG_FIRM_Y ADIS16480_REG(0x03, 0x7C)
|
|
|
|
/*
|
|
* External clock scaling in PPS mode.
|
|
* Available only for ADIS1649x devices
|
|
*/
|
|
#define ADIS16495_REG_SYNC_SCALE ADIS16480_REG(0x03, 0x10)
|
|
|
|
#define ADIS16480_REG_SERIAL_NUM ADIS16480_REG(0x04, 0x20)
|
|
|
|
/* Each filter coefficent bank spans two pages */
|
|
#define ADIS16480_FIR_COEF(page) (x < 60 ? ADIS16480_REG(page, (x) + 8) : \
|
|
ADIS16480_REG((page) + 1, (x) - 60 + 8))
|
|
#define ADIS16480_FIR_COEF_A(x) ADIS16480_FIR_COEF(0x05, (x))
|
|
#define ADIS16480_FIR_COEF_B(x) ADIS16480_FIR_COEF(0x07, (x))
|
|
#define ADIS16480_FIR_COEF_C(x) ADIS16480_FIR_COEF(0x09, (x))
|
|
#define ADIS16480_FIR_COEF_D(x) ADIS16480_FIR_COEF(0x0B, (x))
|
|
|
|
/* ADIS16480_REG_FNCTIO_CTRL */
|
|
#define ADIS16480_DRDY_SEL_MSK GENMASK(1, 0)
|
|
#define ADIS16480_DRDY_SEL(x) FIELD_PREP(ADIS16480_DRDY_SEL_MSK, x)
|
|
#define ADIS16480_DRDY_POL_MSK BIT(2)
|
|
#define ADIS16480_DRDY_POL(x) FIELD_PREP(ADIS16480_DRDY_POL_MSK, x)
|
|
#define ADIS16480_DRDY_EN_MSK BIT(3)
|
|
#define ADIS16480_DRDY_EN(x) FIELD_PREP(ADIS16480_DRDY_EN_MSK, x)
|
|
#define ADIS16480_SYNC_SEL_MSK GENMASK(5, 4)
|
|
#define ADIS16480_SYNC_SEL(x) FIELD_PREP(ADIS16480_SYNC_SEL_MSK, x)
|
|
#define ADIS16480_SYNC_EN_MSK BIT(7)
|
|
#define ADIS16480_SYNC_EN(x) FIELD_PREP(ADIS16480_SYNC_EN_MSK, x)
|
|
#define ADIS16480_SYNC_MODE_MSK BIT(8)
|
|
#define ADIS16480_SYNC_MODE(x) FIELD_PREP(ADIS16480_SYNC_MODE_MSK, x)
|
|
|
|
struct adis16480_chip_info {
|
|
unsigned int num_channels;
|
|
const struct iio_chan_spec *channels;
|
|
unsigned int gyro_max_val;
|
|
unsigned int gyro_max_scale;
|
|
unsigned int accel_max_val;
|
|
unsigned int accel_max_scale;
|
|
unsigned int temp_scale;
|
|
unsigned int int_clk;
|
|
unsigned int max_dec_rate;
|
|
const unsigned int *filter_freqs;
|
|
bool has_pps_clk_mode;
|
|
const struct adis_data adis_data;
|
|
};
|
|
|
|
enum adis16480_int_pin {
|
|
ADIS16480_PIN_DIO1,
|
|
ADIS16480_PIN_DIO2,
|
|
ADIS16480_PIN_DIO3,
|
|
ADIS16480_PIN_DIO4
|
|
};
|
|
|
|
enum adis16480_clock_mode {
|
|
ADIS16480_CLK_SYNC,
|
|
ADIS16480_CLK_PPS,
|
|
ADIS16480_CLK_INT
|
|
};
|
|
|
|
struct adis16480 {
|
|
const struct adis16480_chip_info *chip_info;
|
|
|
|
struct adis adis;
|
|
struct clk *ext_clk;
|
|
enum adis16480_clock_mode clk_mode;
|
|
unsigned int clk_freq;
|
|
};
|
|
|
|
static const char * const adis16480_int_pin_names[4] = {
|
|
[ADIS16480_PIN_DIO1] = "DIO1",
|
|
[ADIS16480_PIN_DIO2] = "DIO2",
|
|
[ADIS16480_PIN_DIO3] = "DIO3",
|
|
[ADIS16480_PIN_DIO4] = "DIO4",
|
|
};
|
|
|
|
#ifdef CONFIG_DEBUG_FS
|
|
|
|
static ssize_t adis16480_show_firmware_revision(struct file *file,
|
|
char __user *userbuf, size_t count, loff_t *ppos)
|
|
{
|
|
struct adis16480 *adis16480 = file->private_data;
|
|
char buf[7];
|
|
size_t len;
|
|
u16 rev;
|
|
int ret;
|
|
|
|
ret = adis_read_reg_16(&adis16480->adis, ADIS16480_REG_FIRM_REV, &rev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
len = scnprintf(buf, sizeof(buf), "%x.%x\n", rev >> 8, rev & 0xff);
|
|
|
|
return simple_read_from_buffer(userbuf, count, ppos, buf, len);
|
|
}
|
|
|
|
static const struct file_operations adis16480_firmware_revision_fops = {
|
|
.open = simple_open,
|
|
.read = adis16480_show_firmware_revision,
|
|
.llseek = default_llseek,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static ssize_t adis16480_show_firmware_date(struct file *file,
|
|
char __user *userbuf, size_t count, loff_t *ppos)
|
|
{
|
|
struct adis16480 *adis16480 = file->private_data;
|
|
u16 md, year;
|
|
char buf[12];
|
|
size_t len;
|
|
int ret;
|
|
|
|
ret = adis_read_reg_16(&adis16480->adis, ADIS16480_REG_FIRM_Y, &year);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = adis_read_reg_16(&adis16480->adis, ADIS16480_REG_FIRM_DM, &md);
|
|
if (ret)
|
|
return ret;
|
|
|
|
len = snprintf(buf, sizeof(buf), "%.2x-%.2x-%.4x\n",
|
|
md >> 8, md & 0xff, year);
|
|
|
|
return simple_read_from_buffer(userbuf, count, ppos, buf, len);
|
|
}
|
|
|
|
static const struct file_operations adis16480_firmware_date_fops = {
|
|
.open = simple_open,
|
|
.read = adis16480_show_firmware_date,
|
|
.llseek = default_llseek,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static int adis16480_show_serial_number(void *arg, u64 *val)
|
|
{
|
|
struct adis16480 *adis16480 = arg;
|
|
u16 serial;
|
|
int ret;
|
|
|
|
ret = adis_read_reg_16(&adis16480->adis, ADIS16480_REG_SERIAL_NUM,
|
|
&serial);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val = serial;
|
|
|
|
return 0;
|
|
}
|
|
DEFINE_DEBUGFS_ATTRIBUTE(adis16480_serial_number_fops,
|
|
adis16480_show_serial_number, NULL, "0x%.4llx\n");
|
|
|
|
static int adis16480_show_product_id(void *arg, u64 *val)
|
|
{
|
|
struct adis16480 *adis16480 = arg;
|
|
u16 prod_id;
|
|
int ret;
|
|
|
|
ret = adis_read_reg_16(&adis16480->adis, ADIS16480_REG_PROD_ID,
|
|
&prod_id);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val = prod_id;
|
|
|
|
return 0;
|
|
}
|
|
DEFINE_DEBUGFS_ATTRIBUTE(adis16480_product_id_fops,
|
|
adis16480_show_product_id, NULL, "%llu\n");
|
|
|
|
static int adis16480_show_flash_count(void *arg, u64 *val)
|
|
{
|
|
struct adis16480 *adis16480 = arg;
|
|
u32 flash_count;
|
|
int ret;
|
|
|
|
ret = adis_read_reg_32(&adis16480->adis, ADIS16480_REG_FLASH_CNT,
|
|
&flash_count);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*val = flash_count;
|
|
|
|
return 0;
|
|
}
|
|
DEFINE_DEBUGFS_ATTRIBUTE(adis16480_flash_count_fops,
|
|
adis16480_show_flash_count, NULL, "%lld\n");
|
|
|
|
static int adis16480_debugfs_init(struct iio_dev *indio_dev)
|
|
{
|
|
struct adis16480 *adis16480 = iio_priv(indio_dev);
|
|
|
|
debugfs_create_file_unsafe("firmware_revision", 0400,
|
|
indio_dev->debugfs_dentry, adis16480,
|
|
&adis16480_firmware_revision_fops);
|
|
debugfs_create_file_unsafe("firmware_date", 0400,
|
|
indio_dev->debugfs_dentry, adis16480,
|
|
&adis16480_firmware_date_fops);
|
|
debugfs_create_file_unsafe("serial_number", 0400,
|
|
indio_dev->debugfs_dentry, adis16480,
|
|
&adis16480_serial_number_fops);
|
|
debugfs_create_file_unsafe("product_id", 0400,
|
|
indio_dev->debugfs_dentry, adis16480,
|
|
&adis16480_product_id_fops);
|
|
debugfs_create_file_unsafe("flash_count", 0400,
|
|
indio_dev->debugfs_dentry, adis16480,
|
|
&adis16480_flash_count_fops);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#else
|
|
|
|
static int adis16480_debugfs_init(struct iio_dev *indio_dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
static int adis16480_set_freq(struct iio_dev *indio_dev, int val, int val2)
|
|
{
|
|
struct adis16480 *st = iio_priv(indio_dev);
|
|
unsigned int t, reg;
|
|
|
|
if (val < 0 || val2 < 0)
|
|
return -EINVAL;
|
|
|
|
t = val * 1000 + val2 / 1000;
|
|
if (t == 0)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* When using PPS mode, the rate of data collection is equal to the
|
|
* product of the external clock frequency and the scale factor in the
|
|
* SYNC_SCALE register.
|
|
* When using sync mode, or internal clock, the output data rate is
|
|
* equal with the clock frequency divided by DEC_RATE + 1.
|
|
*/
|
|
if (st->clk_mode == ADIS16480_CLK_PPS) {
|
|
t = t / st->clk_freq;
|
|
reg = ADIS16495_REG_SYNC_SCALE;
|
|
} else {
|
|
t = st->clk_freq / t;
|
|
reg = ADIS16480_REG_DEC_RATE;
|
|
}
|
|
|
|
if (t > st->chip_info->max_dec_rate)
|
|
t = st->chip_info->max_dec_rate;
|
|
|
|
if ((t != 0) && (st->clk_mode != ADIS16480_CLK_PPS))
|
|
t--;
|
|
|
|
return adis_write_reg_16(&st->adis, reg, t);
|
|
}
|
|
|
|
static int adis16480_get_freq(struct iio_dev *indio_dev, int *val, int *val2)
|
|
{
|
|
struct adis16480 *st = iio_priv(indio_dev);
|
|
uint16_t t;
|
|
int ret;
|
|
unsigned int freq;
|
|
unsigned int reg;
|
|
|
|
if (st->clk_mode == ADIS16480_CLK_PPS)
|
|
reg = ADIS16495_REG_SYNC_SCALE;
|
|
else
|
|
reg = ADIS16480_REG_DEC_RATE;
|
|
|
|
ret = adis_read_reg_16(&st->adis, reg, &t);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* When using PPS mode, the rate of data collection is equal to the
|
|
* product of the external clock frequency and the scale factor in the
|
|
* SYNC_SCALE register.
|
|
* When using sync mode, or internal clock, the output data rate is
|
|
* equal with the clock frequency divided by DEC_RATE + 1.
|
|
*/
|
|
if (st->clk_mode == ADIS16480_CLK_PPS)
|
|
freq = st->clk_freq * t;
|
|
else
|
|
freq = st->clk_freq / (t + 1);
|
|
|
|
*val = freq / 1000;
|
|
*val2 = (freq % 1000) * 1000;
|
|
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
}
|
|
|
|
enum {
|
|
ADIS16480_SCAN_GYRO_X,
|
|
ADIS16480_SCAN_GYRO_Y,
|
|
ADIS16480_SCAN_GYRO_Z,
|
|
ADIS16480_SCAN_ACCEL_X,
|
|
ADIS16480_SCAN_ACCEL_Y,
|
|
ADIS16480_SCAN_ACCEL_Z,
|
|
ADIS16480_SCAN_MAGN_X,
|
|
ADIS16480_SCAN_MAGN_Y,
|
|
ADIS16480_SCAN_MAGN_Z,
|
|
ADIS16480_SCAN_BARO,
|
|
ADIS16480_SCAN_TEMP,
|
|
};
|
|
|
|
static const unsigned int adis16480_calibbias_regs[] = {
|
|
[ADIS16480_SCAN_GYRO_X] = ADIS16480_REG_X_GYRO_BIAS,
|
|
[ADIS16480_SCAN_GYRO_Y] = ADIS16480_REG_Y_GYRO_BIAS,
|
|
[ADIS16480_SCAN_GYRO_Z] = ADIS16480_REG_Z_GYRO_BIAS,
|
|
[ADIS16480_SCAN_ACCEL_X] = ADIS16480_REG_X_ACCEL_BIAS,
|
|
[ADIS16480_SCAN_ACCEL_Y] = ADIS16480_REG_Y_ACCEL_BIAS,
|
|
[ADIS16480_SCAN_ACCEL_Z] = ADIS16480_REG_Z_ACCEL_BIAS,
|
|
[ADIS16480_SCAN_MAGN_X] = ADIS16480_REG_X_HARD_IRON,
|
|
[ADIS16480_SCAN_MAGN_Y] = ADIS16480_REG_Y_HARD_IRON,
|
|
[ADIS16480_SCAN_MAGN_Z] = ADIS16480_REG_Z_HARD_IRON,
|
|
[ADIS16480_SCAN_BARO] = ADIS16480_REG_BAROM_BIAS,
|
|
};
|
|
|
|
static const unsigned int adis16480_calibscale_regs[] = {
|
|
[ADIS16480_SCAN_GYRO_X] = ADIS16480_REG_X_GYRO_SCALE,
|
|
[ADIS16480_SCAN_GYRO_Y] = ADIS16480_REG_Y_GYRO_SCALE,
|
|
[ADIS16480_SCAN_GYRO_Z] = ADIS16480_REG_Z_GYRO_SCALE,
|
|
[ADIS16480_SCAN_ACCEL_X] = ADIS16480_REG_X_ACCEL_SCALE,
|
|
[ADIS16480_SCAN_ACCEL_Y] = ADIS16480_REG_Y_ACCEL_SCALE,
|
|
[ADIS16480_SCAN_ACCEL_Z] = ADIS16480_REG_Z_ACCEL_SCALE,
|
|
};
|
|
|
|
static int adis16480_set_calibbias(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan, int bias)
|
|
{
|
|
unsigned int reg = adis16480_calibbias_regs[chan->scan_index];
|
|
struct adis16480 *st = iio_priv(indio_dev);
|
|
|
|
switch (chan->type) {
|
|
case IIO_MAGN:
|
|
case IIO_PRESSURE:
|
|
if (bias < -0x8000 || bias >= 0x8000)
|
|
return -EINVAL;
|
|
return adis_write_reg_16(&st->adis, reg, bias);
|
|
case IIO_ANGL_VEL:
|
|
case IIO_ACCEL:
|
|
return adis_write_reg_32(&st->adis, reg, bias);
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int adis16480_get_calibbias(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan, int *bias)
|
|
{
|
|
unsigned int reg = adis16480_calibbias_regs[chan->scan_index];
|
|
struct adis16480 *st = iio_priv(indio_dev);
|
|
uint16_t val16;
|
|
uint32_t val32;
|
|
int ret;
|
|
|
|
switch (chan->type) {
|
|
case IIO_MAGN:
|
|
case IIO_PRESSURE:
|
|
ret = adis_read_reg_16(&st->adis, reg, &val16);
|
|
if (ret == 0)
|
|
*bias = sign_extend32(val16, 15);
|
|
break;
|
|
case IIO_ANGL_VEL:
|
|
case IIO_ACCEL:
|
|
ret = adis_read_reg_32(&st->adis, reg, &val32);
|
|
if (ret == 0)
|
|
*bias = sign_extend32(val32, 31);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
return IIO_VAL_INT;
|
|
}
|
|
|
|
static int adis16480_set_calibscale(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan, int scale)
|
|
{
|
|
unsigned int reg = adis16480_calibscale_regs[chan->scan_index];
|
|
struct adis16480 *st = iio_priv(indio_dev);
|
|
|
|
if (scale < -0x8000 || scale >= 0x8000)
|
|
return -EINVAL;
|
|
|
|
return adis_write_reg_16(&st->adis, reg, scale);
|
|
}
|
|
|
|
static int adis16480_get_calibscale(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan, int *scale)
|
|
{
|
|
unsigned int reg = adis16480_calibscale_regs[chan->scan_index];
|
|
struct adis16480 *st = iio_priv(indio_dev);
|
|
uint16_t val16;
|
|
int ret;
|
|
|
|
ret = adis_read_reg_16(&st->adis, reg, &val16);
|
|
if (ret)
|
|
return ret;
|
|
|
|
*scale = sign_extend32(val16, 15);
|
|
return IIO_VAL_INT;
|
|
}
|
|
|
|
static const unsigned int adis16480_def_filter_freqs[] = {
|
|
310,
|
|
55,
|
|
275,
|
|
63,
|
|
};
|
|
|
|
static const unsigned int adis16495_def_filter_freqs[] = {
|
|
300,
|
|
100,
|
|
300,
|
|
100,
|
|
};
|
|
|
|
static const unsigned int ad16480_filter_data[][2] = {
|
|
[ADIS16480_SCAN_GYRO_X] = { ADIS16480_REG_FILTER_BNK0, 0 },
|
|
[ADIS16480_SCAN_GYRO_Y] = { ADIS16480_REG_FILTER_BNK0, 3 },
|
|
[ADIS16480_SCAN_GYRO_Z] = { ADIS16480_REG_FILTER_BNK0, 6 },
|
|
[ADIS16480_SCAN_ACCEL_X] = { ADIS16480_REG_FILTER_BNK0, 9 },
|
|
[ADIS16480_SCAN_ACCEL_Y] = { ADIS16480_REG_FILTER_BNK0, 12 },
|
|
[ADIS16480_SCAN_ACCEL_Z] = { ADIS16480_REG_FILTER_BNK1, 0 },
|
|
[ADIS16480_SCAN_MAGN_X] = { ADIS16480_REG_FILTER_BNK1, 3 },
|
|
[ADIS16480_SCAN_MAGN_Y] = { ADIS16480_REG_FILTER_BNK1, 6 },
|
|
[ADIS16480_SCAN_MAGN_Z] = { ADIS16480_REG_FILTER_BNK1, 9 },
|
|
};
|
|
|
|
static int adis16480_get_filter_freq(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan, int *freq)
|
|
{
|
|
struct adis16480 *st = iio_priv(indio_dev);
|
|
unsigned int enable_mask, offset, reg;
|
|
uint16_t val;
|
|
int ret;
|
|
|
|
reg = ad16480_filter_data[chan->scan_index][0];
|
|
offset = ad16480_filter_data[chan->scan_index][1];
|
|
enable_mask = BIT(offset + 2);
|
|
|
|
ret = adis_read_reg_16(&st->adis, reg, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!(val & enable_mask))
|
|
*freq = 0;
|
|
else
|
|
*freq = st->chip_info->filter_freqs[(val >> offset) & 0x3];
|
|
|
|
return IIO_VAL_INT;
|
|
}
|
|
|
|
static int adis16480_set_filter_freq(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan, unsigned int freq)
|
|
{
|
|
struct adis16480 *st = iio_priv(indio_dev);
|
|
struct mutex *slock = &st->adis.state_lock;
|
|
unsigned int enable_mask, offset, reg;
|
|
unsigned int diff, best_diff;
|
|
unsigned int i, best_freq;
|
|
uint16_t val;
|
|
int ret;
|
|
|
|
reg = ad16480_filter_data[chan->scan_index][0];
|
|
offset = ad16480_filter_data[chan->scan_index][1];
|
|
enable_mask = BIT(offset + 2);
|
|
|
|
mutex_lock(slock);
|
|
|
|
ret = __adis_read_reg_16(&st->adis, reg, &val);
|
|
if (ret)
|
|
goto out_unlock;
|
|
|
|
if (freq == 0) {
|
|
val &= ~enable_mask;
|
|
} else {
|
|
best_freq = 0;
|
|
best_diff = st->chip_info->filter_freqs[0];
|
|
for (i = 0; i < ARRAY_SIZE(adis16480_def_filter_freqs); i++) {
|
|
if (st->chip_info->filter_freqs[i] >= freq) {
|
|
diff = st->chip_info->filter_freqs[i] - freq;
|
|
if (diff < best_diff) {
|
|
best_diff = diff;
|
|
best_freq = i;
|
|
}
|
|
}
|
|
}
|
|
|
|
val &= ~(0x3 << offset);
|
|
val |= best_freq << offset;
|
|
val |= enable_mask;
|
|
}
|
|
|
|
ret = __adis_write_reg_16(&st->adis, reg, val);
|
|
out_unlock:
|
|
mutex_unlock(slock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int adis16480_read_raw(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan, int *val, int *val2, long info)
|
|
{
|
|
struct adis16480 *st = iio_priv(indio_dev);
|
|
unsigned int temp;
|
|
|
|
switch (info) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
return adis_single_conversion(indio_dev, chan, 0, val);
|
|
case IIO_CHAN_INFO_SCALE:
|
|
switch (chan->type) {
|
|
case IIO_ANGL_VEL:
|
|
*val = st->chip_info->gyro_max_scale;
|
|
*val2 = st->chip_info->gyro_max_val;
|
|
return IIO_VAL_FRACTIONAL;
|
|
case IIO_ACCEL:
|
|
*val = st->chip_info->accel_max_scale;
|
|
*val2 = st->chip_info->accel_max_val;
|
|
return IIO_VAL_FRACTIONAL;
|
|
case IIO_MAGN:
|
|
*val = 0;
|
|
*val2 = 100; /* 0.0001 gauss */
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_TEMP:
|
|
/*
|
|
* +85 degrees Celsius = temp_max_scale
|
|
* +25 degrees Celsius = 0
|
|
* LSB, 25 degrees Celsius = 60 / temp_max_scale
|
|
*/
|
|
*val = st->chip_info->temp_scale / 1000;
|
|
*val2 = (st->chip_info->temp_scale % 1000) * 1000;
|
|
return IIO_VAL_INT_PLUS_MICRO;
|
|
case IIO_PRESSURE:
|
|
/*
|
|
* max scale is 1310 mbar
|
|
* max raw value is 32767 shifted for 32bits
|
|
*/
|
|
*val = 131; /* 1310mbar = 131 kPa */
|
|
*val2 = 32767 << 16;
|
|
return IIO_VAL_FRACTIONAL;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
case IIO_CHAN_INFO_OFFSET:
|
|
/* Only the temperature channel has a offset */
|
|
temp = 25 * 1000000LL; /* 25 degree Celsius = 0x0000 */
|
|
*val = DIV_ROUND_CLOSEST_ULL(temp, st->chip_info->temp_scale);
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_CALIBBIAS:
|
|
return adis16480_get_calibbias(indio_dev, chan, val);
|
|
case IIO_CHAN_INFO_CALIBSCALE:
|
|
return adis16480_get_calibscale(indio_dev, chan, val);
|
|
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
|
|
return adis16480_get_filter_freq(indio_dev, chan, val);
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
return adis16480_get_freq(indio_dev, val, val2);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int adis16480_write_raw(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan, int val, int val2, long info)
|
|
{
|
|
switch (info) {
|
|
case IIO_CHAN_INFO_CALIBBIAS:
|
|
return adis16480_set_calibbias(indio_dev, chan, val);
|
|
case IIO_CHAN_INFO_CALIBSCALE:
|
|
return adis16480_set_calibscale(indio_dev, chan, val);
|
|
case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
|
|
return adis16480_set_filter_freq(indio_dev, chan, val);
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
return adis16480_set_freq(indio_dev, val, val2);
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
#define ADIS16480_MOD_CHANNEL(_type, _mod, _address, _si, _info_sep, _bits) \
|
|
{ \
|
|
.type = (_type), \
|
|
.modified = 1, \
|
|
.channel2 = (_mod), \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
|
|
BIT(IIO_CHAN_INFO_CALIBBIAS) | \
|
|
_info_sep, \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
|
|
.address = (_address), \
|
|
.scan_index = (_si), \
|
|
.scan_type = { \
|
|
.sign = 's', \
|
|
.realbits = (_bits), \
|
|
.storagebits = (_bits), \
|
|
.endianness = IIO_BE, \
|
|
}, \
|
|
}
|
|
|
|
#define ADIS16480_GYRO_CHANNEL(_mod) \
|
|
ADIS16480_MOD_CHANNEL(IIO_ANGL_VEL, IIO_MOD_ ## _mod, \
|
|
ADIS16480_REG_ ## _mod ## _GYRO_OUT, ADIS16480_SCAN_GYRO_ ## _mod, \
|
|
BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | \
|
|
BIT(IIO_CHAN_INFO_CALIBSCALE), \
|
|
32)
|
|
|
|
#define ADIS16480_ACCEL_CHANNEL(_mod) \
|
|
ADIS16480_MOD_CHANNEL(IIO_ACCEL, IIO_MOD_ ## _mod, \
|
|
ADIS16480_REG_ ## _mod ## _ACCEL_OUT, ADIS16480_SCAN_ACCEL_ ## _mod, \
|
|
BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY) | \
|
|
BIT(IIO_CHAN_INFO_CALIBSCALE), \
|
|
32)
|
|
|
|
#define ADIS16480_MAGN_CHANNEL(_mod) \
|
|
ADIS16480_MOD_CHANNEL(IIO_MAGN, IIO_MOD_ ## _mod, \
|
|
ADIS16480_REG_ ## _mod ## _MAGN_OUT, ADIS16480_SCAN_MAGN_ ## _mod, \
|
|
BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
|
|
16)
|
|
|
|
#define ADIS16480_PRESSURE_CHANNEL() \
|
|
{ \
|
|
.type = IIO_PRESSURE, \
|
|
.indexed = 1, \
|
|
.channel = 0, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
|
|
BIT(IIO_CHAN_INFO_CALIBBIAS) | \
|
|
BIT(IIO_CHAN_INFO_SCALE), \
|
|
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
|
|
.address = ADIS16480_REG_BAROM_OUT, \
|
|
.scan_index = ADIS16480_SCAN_BARO, \
|
|
.scan_type = { \
|
|
.sign = 's', \
|
|
.realbits = 32, \
|
|
.storagebits = 32, \
|
|
.endianness = IIO_BE, \
|
|
}, \
|
|
}
|
|
|
|
#define ADIS16480_TEMP_CHANNEL() { \
|
|
.type = IIO_TEMP, \
|
|
.indexed = 1, \
|
|
.channel = 0, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
|
|
BIT(IIO_CHAN_INFO_SCALE) | \
|
|
BIT(IIO_CHAN_INFO_OFFSET), \
|
|
.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ), \
|
|
.address = ADIS16480_REG_TEMP_OUT, \
|
|
.scan_index = ADIS16480_SCAN_TEMP, \
|
|
.scan_type = { \
|
|
.sign = 's', \
|
|
.realbits = 16, \
|
|
.storagebits = 16, \
|
|
.endianness = IIO_BE, \
|
|
}, \
|
|
}
|
|
|
|
static const struct iio_chan_spec adis16480_channels[] = {
|
|
ADIS16480_GYRO_CHANNEL(X),
|
|
ADIS16480_GYRO_CHANNEL(Y),
|
|
ADIS16480_GYRO_CHANNEL(Z),
|
|
ADIS16480_ACCEL_CHANNEL(X),
|
|
ADIS16480_ACCEL_CHANNEL(Y),
|
|
ADIS16480_ACCEL_CHANNEL(Z),
|
|
ADIS16480_MAGN_CHANNEL(X),
|
|
ADIS16480_MAGN_CHANNEL(Y),
|
|
ADIS16480_MAGN_CHANNEL(Z),
|
|
ADIS16480_PRESSURE_CHANNEL(),
|
|
ADIS16480_TEMP_CHANNEL(),
|
|
IIO_CHAN_SOFT_TIMESTAMP(11)
|
|
};
|
|
|
|
static const struct iio_chan_spec adis16485_channels[] = {
|
|
ADIS16480_GYRO_CHANNEL(X),
|
|
ADIS16480_GYRO_CHANNEL(Y),
|
|
ADIS16480_GYRO_CHANNEL(Z),
|
|
ADIS16480_ACCEL_CHANNEL(X),
|
|
ADIS16480_ACCEL_CHANNEL(Y),
|
|
ADIS16480_ACCEL_CHANNEL(Z),
|
|
ADIS16480_TEMP_CHANNEL(),
|
|
IIO_CHAN_SOFT_TIMESTAMP(7)
|
|
};
|
|
|
|
enum adis16480_variant {
|
|
ADIS16375,
|
|
ADIS16480,
|
|
ADIS16485,
|
|
ADIS16488,
|
|
ADIS16490,
|
|
ADIS16495_1,
|
|
ADIS16495_2,
|
|
ADIS16495_3,
|
|
ADIS16497_1,
|
|
ADIS16497_2,
|
|
ADIS16497_3,
|
|
};
|
|
|
|
#define ADIS16480_DIAG_STAT_XGYRO_FAIL 0
|
|
#define ADIS16480_DIAG_STAT_YGYRO_FAIL 1
|
|
#define ADIS16480_DIAG_STAT_ZGYRO_FAIL 2
|
|
#define ADIS16480_DIAG_STAT_XACCL_FAIL 3
|
|
#define ADIS16480_DIAG_STAT_YACCL_FAIL 4
|
|
#define ADIS16480_DIAG_STAT_ZACCL_FAIL 5
|
|
#define ADIS16480_DIAG_STAT_XMAGN_FAIL 8
|
|
#define ADIS16480_DIAG_STAT_YMAGN_FAIL 9
|
|
#define ADIS16480_DIAG_STAT_ZMAGN_FAIL 10
|
|
#define ADIS16480_DIAG_STAT_BARO_FAIL 11
|
|
|
|
static const char * const adis16480_status_error_msgs[] = {
|
|
[ADIS16480_DIAG_STAT_XGYRO_FAIL] = "X-axis gyroscope self-test failure",
|
|
[ADIS16480_DIAG_STAT_YGYRO_FAIL] = "Y-axis gyroscope self-test failure",
|
|
[ADIS16480_DIAG_STAT_ZGYRO_FAIL] = "Z-axis gyroscope self-test failure",
|
|
[ADIS16480_DIAG_STAT_XACCL_FAIL] = "X-axis accelerometer self-test failure",
|
|
[ADIS16480_DIAG_STAT_YACCL_FAIL] = "Y-axis accelerometer self-test failure",
|
|
[ADIS16480_DIAG_STAT_ZACCL_FAIL] = "Z-axis accelerometer self-test failure",
|
|
[ADIS16480_DIAG_STAT_XMAGN_FAIL] = "X-axis magnetometer self-test failure",
|
|
[ADIS16480_DIAG_STAT_YMAGN_FAIL] = "Y-axis magnetometer self-test failure",
|
|
[ADIS16480_DIAG_STAT_ZMAGN_FAIL] = "Z-axis magnetometer self-test failure",
|
|
[ADIS16480_DIAG_STAT_BARO_FAIL] = "Barometer self-test failure",
|
|
};
|
|
|
|
static int adis16480_enable_irq(struct adis *adis, bool enable);
|
|
|
|
#define ADIS16480_DATA(_prod_id, _timeouts) \
|
|
{ \
|
|
.diag_stat_reg = ADIS16480_REG_DIAG_STS, \
|
|
.glob_cmd_reg = ADIS16480_REG_GLOB_CMD, \
|
|
.prod_id_reg = ADIS16480_REG_PROD_ID, \
|
|
.prod_id = (_prod_id), \
|
|
.has_paging = true, \
|
|
.read_delay = 5, \
|
|
.write_delay = 5, \
|
|
.self_test_mask = BIT(1), \
|
|
.self_test_reg = ADIS16480_REG_GLOB_CMD, \
|
|
.status_error_msgs = adis16480_status_error_msgs, \
|
|
.status_error_mask = BIT(ADIS16480_DIAG_STAT_XGYRO_FAIL) | \
|
|
BIT(ADIS16480_DIAG_STAT_YGYRO_FAIL) | \
|
|
BIT(ADIS16480_DIAG_STAT_ZGYRO_FAIL) | \
|
|
BIT(ADIS16480_DIAG_STAT_XACCL_FAIL) | \
|
|
BIT(ADIS16480_DIAG_STAT_YACCL_FAIL) | \
|
|
BIT(ADIS16480_DIAG_STAT_ZACCL_FAIL) | \
|
|
BIT(ADIS16480_DIAG_STAT_XMAGN_FAIL) | \
|
|
BIT(ADIS16480_DIAG_STAT_YMAGN_FAIL) | \
|
|
BIT(ADIS16480_DIAG_STAT_ZMAGN_FAIL) | \
|
|
BIT(ADIS16480_DIAG_STAT_BARO_FAIL), \
|
|
.enable_irq = adis16480_enable_irq, \
|
|
.timeouts = (_timeouts), \
|
|
}
|
|
|
|
static const struct adis_timeout adis16485_timeouts = {
|
|
.reset_ms = 560,
|
|
.sw_reset_ms = 120,
|
|
.self_test_ms = 12,
|
|
};
|
|
|
|
static const struct adis_timeout adis16480_timeouts = {
|
|
.reset_ms = 560,
|
|
.sw_reset_ms = 560,
|
|
.self_test_ms = 12,
|
|
};
|
|
|
|
static const struct adis_timeout adis16495_timeouts = {
|
|
.reset_ms = 170,
|
|
.sw_reset_ms = 130,
|
|
.self_test_ms = 40,
|
|
};
|
|
|
|
static const struct adis_timeout adis16495_1_timeouts = {
|
|
.reset_ms = 250,
|
|
.sw_reset_ms = 210,
|
|
.self_test_ms = 20,
|
|
};
|
|
|
|
static const struct adis16480_chip_info adis16480_chip_info[] = {
|
|
[ADIS16375] = {
|
|
.channels = adis16485_channels,
|
|
.num_channels = ARRAY_SIZE(adis16485_channels),
|
|
/*
|
|
* Typically we do IIO_RAD_TO_DEGREE in the denominator, which
|
|
* is exactly the same as IIO_DEGREE_TO_RAD in numerator, since
|
|
* it gives better approximation. However, in this case we
|
|
* cannot do it since it would not fit in a 32bit variable.
|
|
*/
|
|
.gyro_max_val = 22887 << 16,
|
|
.gyro_max_scale = IIO_DEGREE_TO_RAD(300),
|
|
.accel_max_val = IIO_M_S_2_TO_G(21973 << 16),
|
|
.accel_max_scale = 18,
|
|
.temp_scale = 5650, /* 5.65 milli degree Celsius */
|
|
.int_clk = 2460000,
|
|
.max_dec_rate = 2048,
|
|
.filter_freqs = adis16480_def_filter_freqs,
|
|
.adis_data = ADIS16480_DATA(16375, &adis16485_timeouts),
|
|
},
|
|
[ADIS16480] = {
|
|
.channels = adis16480_channels,
|
|
.num_channels = ARRAY_SIZE(adis16480_channels),
|
|
.gyro_max_val = 22500 << 16,
|
|
.gyro_max_scale = IIO_DEGREE_TO_RAD(450),
|
|
.accel_max_val = IIO_M_S_2_TO_G(12500 << 16),
|
|
.accel_max_scale = 10,
|
|
.temp_scale = 5650, /* 5.65 milli degree Celsius */
|
|
.int_clk = 2460000,
|
|
.max_dec_rate = 2048,
|
|
.filter_freqs = adis16480_def_filter_freqs,
|
|
.adis_data = ADIS16480_DATA(16480, &adis16480_timeouts),
|
|
},
|
|
[ADIS16485] = {
|
|
.channels = adis16485_channels,
|
|
.num_channels = ARRAY_SIZE(adis16485_channels),
|
|
.gyro_max_val = 22500 << 16,
|
|
.gyro_max_scale = IIO_DEGREE_TO_RAD(450),
|
|
.accel_max_val = IIO_M_S_2_TO_G(20000 << 16),
|
|
.accel_max_scale = 5,
|
|
.temp_scale = 5650, /* 5.65 milli degree Celsius */
|
|
.int_clk = 2460000,
|
|
.max_dec_rate = 2048,
|
|
.filter_freqs = adis16480_def_filter_freqs,
|
|
.adis_data = ADIS16480_DATA(16485, &adis16485_timeouts),
|
|
},
|
|
[ADIS16488] = {
|
|
.channels = adis16480_channels,
|
|
.num_channels = ARRAY_SIZE(adis16480_channels),
|
|
.gyro_max_val = 22500 << 16,
|
|
.gyro_max_scale = IIO_DEGREE_TO_RAD(450),
|
|
.accel_max_val = IIO_M_S_2_TO_G(22500 << 16),
|
|
.accel_max_scale = 18,
|
|
.temp_scale = 5650, /* 5.65 milli degree Celsius */
|
|
.int_clk = 2460000,
|
|
.max_dec_rate = 2048,
|
|
.filter_freqs = adis16480_def_filter_freqs,
|
|
.adis_data = ADIS16480_DATA(16488, &adis16485_timeouts),
|
|
},
|
|
[ADIS16490] = {
|
|
.channels = adis16485_channels,
|
|
.num_channels = ARRAY_SIZE(adis16485_channels),
|
|
.gyro_max_val = 20000 << 16,
|
|
.gyro_max_scale = IIO_DEGREE_TO_RAD(100),
|
|
.accel_max_val = IIO_M_S_2_TO_G(16000 << 16),
|
|
.accel_max_scale = 8,
|
|
.temp_scale = 14285, /* 14.285 milli degree Celsius */
|
|
.int_clk = 4250000,
|
|
.max_dec_rate = 4250,
|
|
.filter_freqs = adis16495_def_filter_freqs,
|
|
.has_pps_clk_mode = true,
|
|
.adis_data = ADIS16480_DATA(16490, &adis16495_timeouts),
|
|
},
|
|
[ADIS16495_1] = {
|
|
.channels = adis16485_channels,
|
|
.num_channels = ARRAY_SIZE(adis16485_channels),
|
|
.gyro_max_val = 20000 << 16,
|
|
.gyro_max_scale = IIO_DEGREE_TO_RAD(125),
|
|
.accel_max_val = IIO_M_S_2_TO_G(32000 << 16),
|
|
.accel_max_scale = 8,
|
|
.temp_scale = 12500, /* 12.5 milli degree Celsius */
|
|
.int_clk = 4250000,
|
|
.max_dec_rate = 4250,
|
|
.filter_freqs = adis16495_def_filter_freqs,
|
|
.has_pps_clk_mode = true,
|
|
.adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts),
|
|
},
|
|
[ADIS16495_2] = {
|
|
.channels = adis16485_channels,
|
|
.num_channels = ARRAY_SIZE(adis16485_channels),
|
|
.gyro_max_val = 18000 << 16,
|
|
.gyro_max_scale = IIO_DEGREE_TO_RAD(450),
|
|
.accel_max_val = IIO_M_S_2_TO_G(32000 << 16),
|
|
.accel_max_scale = 8,
|
|
.temp_scale = 12500, /* 12.5 milli degree Celsius */
|
|
.int_clk = 4250000,
|
|
.max_dec_rate = 4250,
|
|
.filter_freqs = adis16495_def_filter_freqs,
|
|
.has_pps_clk_mode = true,
|
|
.adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts),
|
|
},
|
|
[ADIS16495_3] = {
|
|
.channels = adis16485_channels,
|
|
.num_channels = ARRAY_SIZE(adis16485_channels),
|
|
.gyro_max_val = 20000 << 16,
|
|
.gyro_max_scale = IIO_DEGREE_TO_RAD(2000),
|
|
.accel_max_val = IIO_M_S_2_TO_G(32000 << 16),
|
|
.accel_max_scale = 8,
|
|
.temp_scale = 12500, /* 12.5 milli degree Celsius */
|
|
.int_clk = 4250000,
|
|
.max_dec_rate = 4250,
|
|
.filter_freqs = adis16495_def_filter_freqs,
|
|
.has_pps_clk_mode = true,
|
|
.adis_data = ADIS16480_DATA(16495, &adis16495_1_timeouts),
|
|
},
|
|
[ADIS16497_1] = {
|
|
.channels = adis16485_channels,
|
|
.num_channels = ARRAY_SIZE(adis16485_channels),
|
|
.gyro_max_val = 20000 << 16,
|
|
.gyro_max_scale = IIO_DEGREE_TO_RAD(125),
|
|
.accel_max_val = IIO_M_S_2_TO_G(32000 << 16),
|
|
.accel_max_scale = 40,
|
|
.temp_scale = 12500, /* 12.5 milli degree Celsius */
|
|
.int_clk = 4250000,
|
|
.max_dec_rate = 4250,
|
|
.filter_freqs = adis16495_def_filter_freqs,
|
|
.has_pps_clk_mode = true,
|
|
.adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts),
|
|
},
|
|
[ADIS16497_2] = {
|
|
.channels = adis16485_channels,
|
|
.num_channels = ARRAY_SIZE(adis16485_channels),
|
|
.gyro_max_val = 18000 << 16,
|
|
.gyro_max_scale = IIO_DEGREE_TO_RAD(450),
|
|
.accel_max_val = IIO_M_S_2_TO_G(32000 << 16),
|
|
.accel_max_scale = 40,
|
|
.temp_scale = 12500, /* 12.5 milli degree Celsius */
|
|
.int_clk = 4250000,
|
|
.max_dec_rate = 4250,
|
|
.filter_freqs = adis16495_def_filter_freqs,
|
|
.has_pps_clk_mode = true,
|
|
.adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts),
|
|
},
|
|
[ADIS16497_3] = {
|
|
.channels = adis16485_channels,
|
|
.num_channels = ARRAY_SIZE(adis16485_channels),
|
|
.gyro_max_val = 20000 << 16,
|
|
.gyro_max_scale = IIO_DEGREE_TO_RAD(2000),
|
|
.accel_max_val = IIO_M_S_2_TO_G(32000 << 16),
|
|
.accel_max_scale = 40,
|
|
.temp_scale = 12500, /* 12.5 milli degree Celsius */
|
|
.int_clk = 4250000,
|
|
.max_dec_rate = 4250,
|
|
.filter_freqs = adis16495_def_filter_freqs,
|
|
.has_pps_clk_mode = true,
|
|
.adis_data = ADIS16480_DATA(16497, &adis16495_1_timeouts),
|
|
},
|
|
};
|
|
|
|
static const struct iio_info adis16480_info = {
|
|
.read_raw = &adis16480_read_raw,
|
|
.write_raw = &adis16480_write_raw,
|
|
.update_scan_mode = adis_update_scan_mode,
|
|
.debugfs_reg_access = adis_debugfs_reg_access,
|
|
};
|
|
|
|
static int adis16480_stop_device(struct iio_dev *indio_dev)
|
|
{
|
|
struct adis16480 *st = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
ret = adis_write_reg_16(&st->adis, ADIS16480_REG_SLP_CNT, BIT(9));
|
|
if (ret)
|
|
dev_err(&indio_dev->dev,
|
|
"Could not power down device: %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int adis16480_enable_irq(struct adis *adis, bool enable)
|
|
{
|
|
uint16_t val;
|
|
int ret;
|
|
|
|
ret = __adis_read_reg_16(adis, ADIS16480_REG_FNCTIO_CTRL, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val &= ~ADIS16480_DRDY_EN_MSK;
|
|
val |= ADIS16480_DRDY_EN(enable);
|
|
|
|
return __adis_write_reg_16(adis, ADIS16480_REG_FNCTIO_CTRL, val);
|
|
}
|
|
|
|
static int adis16480_config_irq_pin(struct device_node *of_node,
|
|
struct adis16480 *st)
|
|
{
|
|
struct irq_data *desc;
|
|
enum adis16480_int_pin pin;
|
|
unsigned int irq_type;
|
|
uint16_t val;
|
|
int i, irq = 0;
|
|
|
|
desc = irq_get_irq_data(st->adis.spi->irq);
|
|
if (!desc) {
|
|
dev_err(&st->adis.spi->dev, "Could not find IRQ %d\n", irq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* Disable data ready since the default after reset is on */
|
|
val = ADIS16480_DRDY_EN(0);
|
|
|
|
/*
|
|
* Get the interrupt from the devicetre by reading the interrupt-names
|
|
* property. If it is not specified, use DIO1 pin as default.
|
|
* According to the datasheet, the factory default assigns DIO2 as data
|
|
* ready signal. However, in the previous versions of the driver, DIO1
|
|
* pin was used. So, we should leave it as is since some devices might
|
|
* be expecting the interrupt on the wrong physical pin.
|
|
*/
|
|
pin = ADIS16480_PIN_DIO1;
|
|
for (i = 0; i < ARRAY_SIZE(adis16480_int_pin_names); i++) {
|
|
irq = of_irq_get_byname(of_node, adis16480_int_pin_names[i]);
|
|
if (irq > 0) {
|
|
pin = i;
|
|
break;
|
|
}
|
|
}
|
|
|
|
val |= ADIS16480_DRDY_SEL(pin);
|
|
|
|
/*
|
|
* Get the interrupt line behaviour. The data ready polarity can be
|
|
* configured as positive or negative, corresponding to
|
|
* IRQF_TRIGGER_RISING or IRQF_TRIGGER_FALLING respectively.
|
|
*/
|
|
irq_type = irqd_get_trigger_type(desc);
|
|
if (irq_type == IRQF_TRIGGER_RISING) { /* Default */
|
|
val |= ADIS16480_DRDY_POL(1);
|
|
} else if (irq_type == IRQF_TRIGGER_FALLING) {
|
|
val |= ADIS16480_DRDY_POL(0);
|
|
} else {
|
|
dev_err(&st->adis.spi->dev,
|
|
"Invalid interrupt type 0x%x specified\n", irq_type);
|
|
return -EINVAL;
|
|
}
|
|
/* Write the data ready configuration to the FNCTIO_CTRL register */
|
|
return adis_write_reg_16(&st->adis, ADIS16480_REG_FNCTIO_CTRL, val);
|
|
}
|
|
|
|
static int adis16480_of_get_ext_clk_pin(struct adis16480 *st,
|
|
struct device_node *of_node)
|
|
{
|
|
const char *ext_clk_pin;
|
|
enum adis16480_int_pin pin;
|
|
int i;
|
|
|
|
pin = ADIS16480_PIN_DIO2;
|
|
if (of_property_read_string(of_node, "adi,ext-clk-pin", &ext_clk_pin))
|
|
goto clk_input_not_found;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(adis16480_int_pin_names); i++) {
|
|
if (strcasecmp(ext_clk_pin, adis16480_int_pin_names[i]) == 0)
|
|
return i;
|
|
}
|
|
|
|
clk_input_not_found:
|
|
dev_info(&st->adis.spi->dev,
|
|
"clk input line not specified, using DIO2\n");
|
|
return pin;
|
|
}
|
|
|
|
static int adis16480_ext_clk_config(struct adis16480 *st,
|
|
struct device_node *of_node,
|
|
bool enable)
|
|
{
|
|
unsigned int mode, mask;
|
|
enum adis16480_int_pin pin;
|
|
uint16_t val;
|
|
int ret;
|
|
|
|
ret = adis_read_reg_16(&st->adis, ADIS16480_REG_FNCTIO_CTRL, &val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
pin = adis16480_of_get_ext_clk_pin(st, of_node);
|
|
/*
|
|
* Each DIOx pin supports only one function at a time. When a single pin
|
|
* has two assignments, the enable bit for a lower priority function
|
|
* automatically resets to zero (disabling the lower priority function).
|
|
*/
|
|
if (pin == ADIS16480_DRDY_SEL(val))
|
|
dev_warn(&st->adis.spi->dev,
|
|
"DIO%x pin supports only one function at a time\n",
|
|
pin + 1);
|
|
|
|
mode = ADIS16480_SYNC_EN(enable) | ADIS16480_SYNC_SEL(pin);
|
|
mask = ADIS16480_SYNC_EN_MSK | ADIS16480_SYNC_SEL_MSK;
|
|
/* Only ADIS1649x devices support pps ext clock mode */
|
|
if (st->chip_info->has_pps_clk_mode) {
|
|
mode |= ADIS16480_SYNC_MODE(st->clk_mode);
|
|
mask |= ADIS16480_SYNC_MODE_MSK;
|
|
}
|
|
|
|
val &= ~mask;
|
|
val |= mode;
|
|
|
|
ret = adis_write_reg_16(&st->adis, ADIS16480_REG_FNCTIO_CTRL, val);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return clk_prepare_enable(st->ext_clk);
|
|
}
|
|
|
|
static int adis16480_get_ext_clocks(struct adis16480 *st)
|
|
{
|
|
st->clk_mode = ADIS16480_CLK_INT;
|
|
st->ext_clk = devm_clk_get(&st->adis.spi->dev, "sync");
|
|
if (!IS_ERR_OR_NULL(st->ext_clk)) {
|
|
st->clk_mode = ADIS16480_CLK_SYNC;
|
|
return 0;
|
|
}
|
|
|
|
if (PTR_ERR(st->ext_clk) != -ENOENT) {
|
|
dev_err(&st->adis.spi->dev, "failed to get ext clk\n");
|
|
return PTR_ERR(st->ext_clk);
|
|
}
|
|
|
|
if (st->chip_info->has_pps_clk_mode) {
|
|
st->ext_clk = devm_clk_get(&st->adis.spi->dev, "pps");
|
|
if (!IS_ERR_OR_NULL(st->ext_clk)) {
|
|
st->clk_mode = ADIS16480_CLK_PPS;
|
|
return 0;
|
|
}
|
|
|
|
if (PTR_ERR(st->ext_clk) != -ENOENT) {
|
|
dev_err(&st->adis.spi->dev, "failed to get ext clk\n");
|
|
return PTR_ERR(st->ext_clk);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int adis16480_probe(struct spi_device *spi)
|
|
{
|
|
const struct spi_device_id *id = spi_get_device_id(spi);
|
|
const struct adis_data *adis16480_data;
|
|
struct iio_dev *indio_dev;
|
|
struct adis16480 *st;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
|
|
if (indio_dev == NULL)
|
|
return -ENOMEM;
|
|
|
|
spi_set_drvdata(spi, indio_dev);
|
|
|
|
st = iio_priv(indio_dev);
|
|
|
|
st->chip_info = &adis16480_chip_info[id->driver_data];
|
|
indio_dev->dev.parent = &spi->dev;
|
|
indio_dev->name = spi_get_device_id(spi)->name;
|
|
indio_dev->channels = st->chip_info->channels;
|
|
indio_dev->num_channels = st->chip_info->num_channels;
|
|
indio_dev->info = &adis16480_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
adis16480_data = &st->chip_info->adis_data;
|
|
|
|
ret = adis_init(&st->adis, indio_dev, spi, adis16480_data);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = __adis_initial_startup(&st->adis);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = adis16480_config_irq_pin(spi->dev.of_node, st);
|
|
if (ret)
|
|
goto error_stop_device;
|
|
|
|
ret = adis16480_get_ext_clocks(st);
|
|
if (ret)
|
|
goto error_stop_device;
|
|
|
|
if (!IS_ERR_OR_NULL(st->ext_clk)) {
|
|
ret = adis16480_ext_clk_config(st, spi->dev.of_node, true);
|
|
if (ret)
|
|
goto error_stop_device;
|
|
|
|
st->clk_freq = clk_get_rate(st->ext_clk);
|
|
st->clk_freq *= 1000; /* micro */
|
|
} else {
|
|
st->clk_freq = st->chip_info->int_clk;
|
|
}
|
|
|
|
ret = adis_setup_buffer_and_trigger(&st->adis, indio_dev, NULL);
|
|
if (ret)
|
|
goto error_clk_disable_unprepare;
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret)
|
|
goto error_cleanup_buffer;
|
|
|
|
adis16480_debugfs_init(indio_dev);
|
|
|
|
return 0;
|
|
|
|
error_cleanup_buffer:
|
|
adis_cleanup_buffer_and_trigger(&st->adis, indio_dev);
|
|
error_clk_disable_unprepare:
|
|
clk_disable_unprepare(st->ext_clk);
|
|
error_stop_device:
|
|
adis16480_stop_device(indio_dev);
|
|
return ret;
|
|
}
|
|
|
|
static int adis16480_remove(struct spi_device *spi)
|
|
{
|
|
struct iio_dev *indio_dev = spi_get_drvdata(spi);
|
|
struct adis16480 *st = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
adis16480_stop_device(indio_dev);
|
|
|
|
adis_cleanup_buffer_and_trigger(&st->adis, indio_dev);
|
|
clk_disable_unprepare(st->ext_clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct spi_device_id adis16480_ids[] = {
|
|
{ "adis16375", ADIS16375 },
|
|
{ "adis16480", ADIS16480 },
|
|
{ "adis16485", ADIS16485 },
|
|
{ "adis16488", ADIS16488 },
|
|
{ "adis16490", ADIS16490 },
|
|
{ "adis16495-1", ADIS16495_1 },
|
|
{ "adis16495-2", ADIS16495_2 },
|
|
{ "adis16495-3", ADIS16495_3 },
|
|
{ "adis16497-1", ADIS16497_1 },
|
|
{ "adis16497-2", ADIS16497_2 },
|
|
{ "adis16497-3", ADIS16497_3 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, adis16480_ids);
|
|
|
|
static const struct of_device_id adis16480_of_match[] = {
|
|
{ .compatible = "adi,adis16375" },
|
|
{ .compatible = "adi,adis16480" },
|
|
{ .compatible = "adi,adis16485" },
|
|
{ .compatible = "adi,adis16488" },
|
|
{ .compatible = "adi,adis16490" },
|
|
{ .compatible = "adi,adis16495-1" },
|
|
{ .compatible = "adi,adis16495-2" },
|
|
{ .compatible = "adi,adis16495-3" },
|
|
{ .compatible = "adi,adis16497-1" },
|
|
{ .compatible = "adi,adis16497-2" },
|
|
{ .compatible = "adi,adis16497-3" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, adis16480_of_match);
|
|
|
|
static struct spi_driver adis16480_driver = {
|
|
.driver = {
|
|
.name = "adis16480",
|
|
.of_match_table = adis16480_of_match,
|
|
},
|
|
.id_table = adis16480_ids,
|
|
.probe = adis16480_probe,
|
|
.remove = adis16480_remove,
|
|
};
|
|
module_spi_driver(adis16480_driver);
|
|
|
|
MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
|
|
MODULE_DESCRIPTION("Analog Devices ADIS16480 IMU driver");
|
|
MODULE_LICENSE("GPL v2");
|