linux_dsm_epyc7002/drivers/uio/uio_pruss.c
Linus Torvalds d027db132b ARM: arm-soc: SoC updates for 3.8
This contains the bulk of new SoC development for this merge window.
 
 Two new platforms have been added, the sunxi platforms (Allwinner A1x
 SoCs) by Maxime Ripard, and a generic Broadcom platform for a new
 series of ARMv7 platforms from them, where the hope is that we can
 keep the platform code generic enough to have them all share one mach
 directory. The new Broadcom platform is contributed by Christian Daudt.
 
 Highbank has grown support for Calxeda's next generation of hardware,
 ECX-2000.
 
 clps711x has seen a lot of cleanup from Alexander Shiyan, and he's also
 taken on maintainership of the platform.
 
 Beyond this there has been a bunch of work from a number of people on
 converting more platforms to IRQ domains, pinctrl conversion, cleanup
 and general feature enablement across most of the active platforms.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.11 (GNU/Linux)
 
 iQIcBAABAgAGBQJQyLCjAAoJEIwa5zzehBx3AdQP/R+L3+EQMjiEWt/p7g/ql5Em
 0SnP92CcGzrjgLTg9z1FeOazfOsGnkZAYUlDRkqfKobH3VqkhYFFtt1/0x0KMahm
 xcowHgMBOyimFdWT9vLK3J8U6DLui5XrEG9LGH2VL+lqmfjIyP/OOF3mVc0/+pV9
 WTLAsYswdBRSeiNuF43kqlfrOwF6xsPLgiNMlc82w6BzHqoHu6dOif5M9MqWaApS
 V74DPmwLD371Tyit6aHqt3JOqpgiPSHlmxkzomK+5idcW3Pa7HnzzFYmx85dk/eN
 J2siqIkoOu7tEfjIbNZTL2MYoX4tUUKv4qZZ3IOl3YSWaV3P5ilMApF01XVrkk8E
 DWOMhzte9hC7L90W+/kCPLF1VyeAhCem2KQWUitO71fKur3r+3ZaUokNVvWzkJIL
 7aduxAJOV2hfLgEqbjbjF3o4S8p63OV3kzivFJM1And15zDJo4+qqOh67+bPo4jj
 +R4du+SqzXriw4i3tDLGVpdjDffk4D41tbLzgkWAtvGyoP45yeYfHAzAh0pDFPRv
 ASfZVmZ5PhwAUAkIMnpC2sjgmxMYff3SYqmDgnsqXES7rbDH/hG+teymtHFTyUQp
 m+f60DNotSMcMvkLdvruLSB4aeTiwbfOqPn/g+aXYUlPuNMq1fVWgN7EJKWkamK4
 nRwaJmLwx1/ojcVbpy2G
 =YMKB
 -----END PGP SIGNATURE-----

Merge tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC updates from Olof Johansson:
 "This contains the bulk of new SoC development for this merge window.

  Two new platforms have been added, the sunxi platforms (Allwinner A1x
  SoCs) by Maxime Ripard, and a generic Broadcom platform for a new
  series of ARMv7 platforms from them, where the hope is that we can
  keep the platform code generic enough to have them all share one mach
  directory.  The new Broadcom platform is contributed by Christian
  Daudt.

  Highbank has grown support for Calxeda's next generation of hardware,
  ECX-2000.

  clps711x has seen a lot of cleanup from Alexander Shiyan, and he's
  also taken on maintainership of the platform.

  Beyond this there has been a bunch of work from a number of people on
  converting more platforms to IRQ domains, pinctrl conversion, cleanup
  and general feature enablement across most of the active platforms."

Fix up trivial conflicts as per Olof.

* tag 'soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (174 commits)
  mfd: vexpress-sysreg: Remove LEDs code
  irqchip: irq-sunxi: Add terminating entry for sunxi_irq_dt_ids
  clocksource: sunxi_timer: Add terminating entry for sunxi_timer_dt_ids
  irq: versatile: delete dangling variable
  ARM: sunxi: add missing include for mdelay()
  ARM: EXYNOS: Avoid early use of of_machine_is_compatible()
  ARM: dts: add node for PL330 MDMA1 controller for exynos4
  ARM: EXYNOS: Add support for secondary CPU bring-up on Exynos4412
  ARM: EXYNOS: add UART3 to DEBUG_LL ports
  ARM: S3C24XX: Add clkdev entry for camif-upll clock
  ARM: SAMSUNG: Add s3c24xx/s3c64xx CAMIF GPIO setup helpers
  ARM: sunxi: Add missing sun4i.dtsi file
  pinctrl: samsung: Do not initialise statics to 0
  ARM i.MX6: remove gate_mask from pllv3
  ARM i.MX6: Fix ethernet PLL clocks
  ARM i.MX6: rename PLLs according to datasheet
  ARM i.MX6: Add pwm support
  ARM i.MX51: Add pwm support
  ARM i.MX53: Add pwm support
  ARM: mx5: Replace clk_register_clkdev with clock DT lookup
  ...
2012-12-12 12:05:15 -08:00

246 lines
6.5 KiB
C

/*
* Programmable Real-Time Unit Sub System (PRUSS) UIO driver (uio_pruss)
*
* This driver exports PRUSS host event out interrupts and PRUSS, L3 RAM,
* and DDR RAM to user space for applications interacting with PRUSS firmware
*
* Copyright (C) 2010-11 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/device.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
#include <linux/uio_driver.h>
#include <linux/platform_data/uio_pruss.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/genalloc.h>
#define DRV_NAME "pruss_uio"
#define DRV_VERSION "1.0"
static int sram_pool_sz = SZ_16K;
module_param(sram_pool_sz, int, 0);
MODULE_PARM_DESC(sram_pool_sz, "sram pool size to allocate ");
static int extram_pool_sz = SZ_256K;
module_param(extram_pool_sz, int, 0);
MODULE_PARM_DESC(extram_pool_sz, "external ram pool size to allocate");
/*
* Host event IRQ numbers from PRUSS - PRUSS can generate up to 8 interrupt
* events to AINTC of ARM host processor - which can be used for IPC b/w PRUSS
* firmware and user space application, async notification from PRU firmware
* to user space application
* 3 PRU_EVTOUT0
* 4 PRU_EVTOUT1
* 5 PRU_EVTOUT2
* 6 PRU_EVTOUT3
* 7 PRU_EVTOUT4
* 8 PRU_EVTOUT5
* 9 PRU_EVTOUT6
* 10 PRU_EVTOUT7
*/
#define MAX_PRUSS_EVT 8
#define PINTC_HIDISR 0x0038
#define PINTC_HIPIR 0x0900
#define HIPIR_NOPEND 0x80000000
#define PINTC_HIER 0x1500
struct uio_pruss_dev {
struct uio_info *info;
struct clk *pruss_clk;
dma_addr_t sram_paddr;
dma_addr_t ddr_paddr;
void __iomem *prussio_vaddr;
unsigned long sram_vaddr;
void *ddr_vaddr;
unsigned int hostirq_start;
unsigned int pintc_base;
struct gen_pool *sram_pool;
};
static irqreturn_t pruss_handler(int irq, struct uio_info *info)
{
struct uio_pruss_dev *gdev = info->priv;
int intr_bit = (irq - gdev->hostirq_start + 2);
int val, intr_mask = (1 << intr_bit);
void __iomem *base = gdev->prussio_vaddr + gdev->pintc_base;
void __iomem *intren_reg = base + PINTC_HIER;
void __iomem *intrdis_reg = base + PINTC_HIDISR;
void __iomem *intrstat_reg = base + PINTC_HIPIR + (intr_bit << 2);
val = ioread32(intren_reg);
/* Is interrupt enabled and active ? */
if (!(val & intr_mask) && (ioread32(intrstat_reg) & HIPIR_NOPEND))
return IRQ_NONE;
/* Disable interrupt */
iowrite32(intr_bit, intrdis_reg);
return IRQ_HANDLED;
}
static void pruss_cleanup(struct platform_device *dev,
struct uio_pruss_dev *gdev)
{
int cnt;
struct uio_info *p = gdev->info;
for (cnt = 0; cnt < MAX_PRUSS_EVT; cnt++, p++) {
uio_unregister_device(p);
kfree(p->name);
}
iounmap(gdev->prussio_vaddr);
if (gdev->ddr_vaddr) {
dma_free_coherent(&dev->dev, extram_pool_sz, gdev->ddr_vaddr,
gdev->ddr_paddr);
}
if (gdev->sram_vaddr)
gen_pool_free(gdev->sram_pool,
gdev->sram_vaddr,
sram_pool_sz);
kfree(gdev->info);
clk_put(gdev->pruss_clk);
kfree(gdev);
}
static int pruss_probe(struct platform_device *dev)
{
struct uio_info *p;
struct uio_pruss_dev *gdev;
struct resource *regs_prussio;
int ret = -ENODEV, cnt = 0, len;
struct uio_pruss_pdata *pdata = dev->dev.platform_data;
gdev = kzalloc(sizeof(struct uio_pruss_dev), GFP_KERNEL);
if (!gdev)
return -ENOMEM;
gdev->info = kzalloc(sizeof(*p) * MAX_PRUSS_EVT, GFP_KERNEL);
if (!gdev->info) {
kfree(gdev);
return -ENOMEM;
}
/* Power on PRU in case its not done as part of boot-loader */
gdev->pruss_clk = clk_get(&dev->dev, "pruss");
if (IS_ERR(gdev->pruss_clk)) {
dev_err(&dev->dev, "Failed to get clock\n");
kfree(gdev->info);
kfree(gdev);
ret = PTR_ERR(gdev->pruss_clk);
return ret;
} else {
clk_enable(gdev->pruss_clk);
}
regs_prussio = platform_get_resource(dev, IORESOURCE_MEM, 0);
if (!regs_prussio) {
dev_err(&dev->dev, "No PRUSS I/O resource specified\n");
goto out_free;
}
if (!regs_prussio->start) {
dev_err(&dev->dev, "Invalid memory resource\n");
goto out_free;
}
if (pdata->sram_pool) {
gdev->sram_pool = pdata->sram_pool;
gdev->sram_vaddr =
gen_pool_alloc(gdev->sram_pool, sram_pool_sz);
if (!gdev->sram_vaddr) {
dev_err(&dev->dev, "Could not allocate SRAM pool\n");
goto out_free;
}
gdev->sram_paddr =
gen_pool_virt_to_phys(gdev->sram_pool,
gdev->sram_vaddr);
}
gdev->ddr_vaddr = dma_alloc_coherent(&dev->dev, extram_pool_sz,
&(gdev->ddr_paddr), GFP_KERNEL | GFP_DMA);
if (!gdev->ddr_vaddr) {
dev_err(&dev->dev, "Could not allocate external memory\n");
goto out_free;
}
len = resource_size(regs_prussio);
gdev->prussio_vaddr = ioremap(regs_prussio->start, len);
if (!gdev->prussio_vaddr) {
dev_err(&dev->dev, "Can't remap PRUSS I/O address range\n");
goto out_free;
}
gdev->pintc_base = pdata->pintc_base;
gdev->hostirq_start = platform_get_irq(dev, 0);
for (cnt = 0, p = gdev->info; cnt < MAX_PRUSS_EVT; cnt++, p++) {
p->mem[0].addr = regs_prussio->start;
p->mem[0].size = resource_size(regs_prussio);
p->mem[0].memtype = UIO_MEM_PHYS;
p->mem[1].addr = gdev->sram_paddr;
p->mem[1].size = sram_pool_sz;
p->mem[1].memtype = UIO_MEM_PHYS;
p->mem[2].addr = gdev->ddr_paddr;
p->mem[2].size = extram_pool_sz;
p->mem[2].memtype = UIO_MEM_PHYS;
p->name = kasprintf(GFP_KERNEL, "pruss_evt%d", cnt);
p->version = DRV_VERSION;
/* Register PRUSS IRQ lines */
p->irq = gdev->hostirq_start + cnt;
p->handler = pruss_handler;
p->priv = gdev;
ret = uio_register_device(&dev->dev, p);
if (ret < 0)
goto out_free;
}
platform_set_drvdata(dev, gdev);
return 0;
out_free:
pruss_cleanup(dev, gdev);
return ret;
}
static int pruss_remove(struct platform_device *dev)
{
struct uio_pruss_dev *gdev = platform_get_drvdata(dev);
pruss_cleanup(dev, gdev);
platform_set_drvdata(dev, NULL);
return 0;
}
static struct platform_driver pruss_driver = {
.probe = pruss_probe,
.remove = pruss_remove,
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
},
};
module_platform_driver(pruss_driver);
MODULE_LICENSE("GPL v2");
MODULE_VERSION(DRV_VERSION);
MODULE_AUTHOR("Amit Chatterjee <amit.chatterjee@ti.com>");
MODULE_AUTHOR("Pratheesh Gangadhar <pratheesh@ti.com>");