linux_dsm_epyc7002/arch/arm/boot/dts/imx6sx-sdb.dts
Olof Johansson 2cb6115deb The i.MX device tree updates for 4.13:
- New board support: Gateworks Ventana GW5600, Technexion Pico i.MX7D
    Board.
  - A series from Alexandre Belloni to correct the vendor prefix for
    rv4162 compatible.
  - A patch-set from Andrey Smirnov ot enable PCIe support for i.MX7 and
    imx7d-sdb board.
  - Increase the SGTL5000 LRCLK pad strength to fix a random audio
    channel swapping seen on imx6qdl-wandboard and imx6qdl-colibri
    boards.
  - Clean up non-existing property 'enable-active-low' from fixed
    regulator device nodes.
  - Correct GPIO polarity for Ethernet PHY and PCI reset lines, even
    though device drivers do not use the polarity for now.
  - Add Wifi and Bluetooth support for imx7d-sdb board.
  - Adopt the i.MX6Q/DL DT to the new and more flexible GPC binding.
  - Update zii-rdu2 device tree source to use #include "..." for local
    inclusion.
  - A series from Philipp Zabel and Steve Longerbeam to enable video
    capture support for imx6qdl platforms.
  - A number of small random updates on various board support.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJZRcZ+AAoJEFBXWFqHsHzOPrcIAKrIeegjnl29Fp6JA2u3xC3R
 XRyi59ybxGLB/8FNdbKqWJS9cAgOuF61FgYIgSRTqxVobPtZTdGMicnbp+FTTRYa
 AaXxeB+3YVH2PJxDB1f4ZrlcBMNo3cpSO4ECbtnBgxoupQXOKIBQbLbujbyjsnbP
 d/XFCC6LQFlL7yH8+jQrjiUkk0HSzHpzq3Kt6Dzq7WqWsOghOqDfsV2PhqnKvNzL
 V0iovP9u9rayWn7Ik+bg7GlOtdaBTf8i0/TN4LcpCiKSw3wh7Uz03E0Cd2WMIO3N
 Qs9R2QQ/GS0zZOmBlpYBO2waw9Xy9ZnbX/5zJtnw29IBiVdmbSNA5Q0QJySxPtw=
 =hxCr
 -----END PGP SIGNATURE-----

Merge tag 'imx-dt-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

The i.MX device tree updates for 4.13:
 - New board support: Gateworks Ventana GW5600, Technexion Pico i.MX7D
   Board.
 - A series from Alexandre Belloni to correct the vendor prefix for
   rv4162 compatible.
 - A patch-set from Andrey Smirnov ot enable PCIe support for i.MX7 and
   imx7d-sdb board.
 - Increase the SGTL5000 LRCLK pad strength to fix a random audio
   channel swapping seen on imx6qdl-wandboard and imx6qdl-colibri
   boards.
 - Clean up non-existing property 'enable-active-low' from fixed
   regulator device nodes.
 - Correct GPIO polarity for Ethernet PHY and PCI reset lines, even
   though device drivers do not use the polarity for now.
 - Add Wifi and Bluetooth support for imx7d-sdb board.
 - Adopt the i.MX6Q/DL DT to the new and more flexible GPC binding.
 - Update zii-rdu2 device tree source to use #include "..." for local
   inclusion.
 - A series from Philipp Zabel and Steve Longerbeam to enable video
   capture support for imx6qdl platforms.
 - A number of small random updates on various board support.

* tag 'imx-dt-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (47 commits)
  ARM: dts: imx6q-cm-fx6: add sdio wifi/bt nodes
  ARM: dts: ls1021a: update the clockgen node
  ARM: dts: imx6-sabreauto: add the ADV7180 video decoder
  ARM: dts: imx6-sabreauto: add pinctrl for gpt input capture
  ARM: dts: imx6-sabreauto: add reset-gpios property for max7310_b
  ARM: dts: imx6-sabreauto: create i2cmux for i2c3
  ARM: dts: imx6-sabresd: add OV5642 and OV5640 camera sensors
  ARM: dts: imx6-sabrelite: add OV5642 and OV5640 camera sensors
  ARM: dts: imx6qdl-sabrelite: remove erratum ERR006687 workaround
  ARM: dts: imx6qdl: add capture-subsystem device
  ARM: dts: imx6qdl: Add video multiplexers, mipi_csi, and their connections
  ARM: dts: imx6qdl: Add compatible, clocks, irqs to MIPI CSI-2 node
  ARM: dts: imx6qdl: add multiplexer controls
  ARM: dts: imx6: Fix PCI GPIO reset polarity
  ARM: dts: imx7d-sdb: Add Bluetooth support
  ARM: dts: imx7d-sdb: Add Wifi support
  ARM: dts: imx7d-sdb: Adjust the regulator nodes
  ARM: dts: imx: Fix Ethernet PHY reset polarity
  ARM: dts: imx7: Fix typo in watchdog pin name
  ARM: dts: vf610-zii: Add switch eeprom-length properties
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>
2017-06-18 23:06:36 -07:00

139 lines
2.8 KiB
Plaintext

/*
* Copyright (C) 2015 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "imx6sx-sdb.dtsi"
/ {
model = "Freescale i.MX6 SoloX SDB RevB Board";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
pmic: pfuze100@08 {
compatible = "fsl,pfuze200";
reg = <0x08>;
regulators {
sw1a_reg: sw1ab {
regulator-min-microvolt = <300000>;
regulator-max-microvolt = <1875000>;
regulator-boot-on;
regulator-always-on;
regulator-ramp-delay = <6250>;
};
sw2_reg: sw2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
};
sw3a_reg: sw3a {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1975000>;
regulator-boot-on;
regulator-always-on;
};
sw3b_reg: sw3b {
regulator-min-microvolt = <400000>;
regulator-max-microvolt = <1975000>;
regulator-boot-on;
regulator-always-on;
};
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
};
snvs_reg: vsnvs {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-boot-on;
regulator-always-on;
};
vref_reg: vrefddr {
regulator-boot-on;
regulator-always-on;
};
vgen1_reg: vgen1 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
regulator-always-on;
};
vgen2_reg: vgen2 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
vgen3_reg: vgen3 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen4_reg: vgen4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen5_reg: vgen5 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vgen6_reg: vgen6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
};
};
&qspi2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_qspi2>;
status = "okay";
flash0: n25q256a@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
reg = <0>;
};
flash1: n25q256a@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "micron,n25q256a", "jedec,spi-nor";
spi-max-frequency = <29000000>;
reg = <1>;
};
};
&reg_arm {
vin-supply = <&sw1a_reg>;
};
&reg_soc {
vin-supply = <&sw1a_reg>;
};