mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-11-24 23:20:50 +07:00
c7087652e1
When BMDMA initialization failed or BMDMA was not available for whatever reason, bmdma_addr was left at zero and used as an indication that BMDMA shouldn't be used. This leads to the following problems. p1. For BMDMA drivers which don't use traditional BMDMA register, ata_bmdma_mode_filter() incorrectly inhibits DMA modes. Those drivers either have to inherit from ata_sff_port_ops or clear ->mode_filter explicitly. p2. non-BMDMA drivers call into BMDMA PRD table allocation. It doesn't actually allocate PRD table if bmdma_addr is not initialized but is still confusing. p3. For BMDMA drivers which don't use traditional BMDMA register, some methods might not be invoked as expected (e.g. bmdma_stop from ata_sff_post_internal_cmd()). p4. SFF drivers w/ custom DMA interface implement noop BMDMA ops worrying libata core might call into one of them. These problems are caused by the muddy line between SFF and BMDMA and the assumption that all BMDMA controllers initialize bmdma_addr. This patch fixes p1 and p2 by removing the bmdma_addr assumption and moving prd allocation to BMDMA port start. Later patches will fix the remaining issues. This patch improves BMDMA initialization such that * When BMDMA register initialization fails, falls back to PIO instead of failing. ata_pci_bmdma_init() never fails now. * When ata_pci_bmdma_init() falls back to PIO, it clears ap->mwdma_mask and udma_mask instead of depending on ata_bmdma_mode_filter(). This makes ata_bmdma_mode_filter() unnecessary thus resolving p1. * ata_port_start() which actually is BMDMA specific is moved to ata_bmdma_port_start(). ata_port_start() and ata_sff_port_start() are killed. * ata_sff_port_start32() is moved and renamed to ata_bmdma_port_start32(). Drivers which no longer call into PRD table allocation are... pdc_adma, sata_inic162x, sata_qstor, sata_sx4, pata_cmd640 and all drivers which inherit from ata_sff_port_ops. pata_icside sets ->port_start to ATA_OP_NULL as it doesn't need PRD but is a BMDMA controller and doesn't have custom port_start like other such controllers. Note that with the previous patch which makes all and only BMDMA drivers inherit from ata_bmdma_port_ops, this change doesn't break drivers which need PRD table. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
1273 lines
34 KiB
C
1273 lines
34 KiB
C
/*
|
|
* sata_promise.c - Promise SATA
|
|
*
|
|
* Maintained by: Jeff Garzik <jgarzik@pobox.com>
|
|
* Mikael Pettersson <mikpe@it.uu.se>
|
|
* Please ALWAYS copy linux-ide@vger.kernel.org
|
|
* on emails.
|
|
*
|
|
* Copyright 2003-2004 Red Hat, Inc.
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; see the file COPYING. If not, write to
|
|
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
*
|
|
* libata documentation is available via 'make {ps|pdf}docs',
|
|
* as Documentation/DocBook/libata.*
|
|
*
|
|
* Hardware information only available under NDA.
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/gfp.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/device.h>
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <linux/libata.h>
|
|
#include "sata_promise.h"
|
|
|
|
#define DRV_NAME "sata_promise"
|
|
#define DRV_VERSION "2.12"
|
|
|
|
enum {
|
|
PDC_MAX_PORTS = 4,
|
|
PDC_MMIO_BAR = 3,
|
|
PDC_MAX_PRD = LIBATA_MAX_PRD - 1, /* -1 for ASIC PRD bug workaround */
|
|
|
|
/* host register offsets (from host->iomap[PDC_MMIO_BAR]) */
|
|
PDC_INT_SEQMASK = 0x40, /* Mask of asserted SEQ INTs */
|
|
PDC_FLASH_CTL = 0x44, /* Flash control register */
|
|
PDC_PCI_CTL = 0x48, /* PCI control/status reg */
|
|
PDC_SATA_PLUG_CSR = 0x6C, /* SATA Plug control/status reg */
|
|
PDC2_SATA_PLUG_CSR = 0x60, /* SATAII Plug control/status reg */
|
|
PDC_TBG_MODE = 0x41C, /* TBG mode (not SATAII) */
|
|
PDC_SLEW_CTL = 0x470, /* slew rate control reg (not SATAII) */
|
|
|
|
/* per-port ATA register offsets (from ap->ioaddr.cmd_addr) */
|
|
PDC_FEATURE = 0x04, /* Feature/Error reg (per port) */
|
|
PDC_SECTOR_COUNT = 0x08, /* Sector count reg (per port) */
|
|
PDC_SECTOR_NUMBER = 0x0C, /* Sector number reg (per port) */
|
|
PDC_CYLINDER_LOW = 0x10, /* Cylinder low reg (per port) */
|
|
PDC_CYLINDER_HIGH = 0x14, /* Cylinder high reg (per port) */
|
|
PDC_DEVICE = 0x18, /* Device/Head reg (per port) */
|
|
PDC_COMMAND = 0x1C, /* Command/status reg (per port) */
|
|
PDC_ALTSTATUS = 0x38, /* Alternate-status/device-control reg (per port) */
|
|
PDC_PKT_SUBMIT = 0x40, /* Command packet pointer addr */
|
|
PDC_GLOBAL_CTL = 0x48, /* Global control/status (per port) */
|
|
PDC_CTLSTAT = 0x60, /* IDE control and status (per port) */
|
|
|
|
/* per-port SATA register offsets (from ap->ioaddr.scr_addr) */
|
|
PDC_SATA_ERROR = 0x04,
|
|
PDC_PHYMODE4 = 0x14,
|
|
PDC_LINK_LAYER_ERRORS = 0x6C,
|
|
PDC_FPDMA_CTLSTAT = 0xD8,
|
|
PDC_INTERNAL_DEBUG_1 = 0xF8, /* also used for PATA */
|
|
PDC_INTERNAL_DEBUG_2 = 0xFC, /* also used for PATA */
|
|
|
|
/* PDC_FPDMA_CTLSTAT bit definitions */
|
|
PDC_FPDMA_CTLSTAT_RESET = 1 << 3,
|
|
PDC_FPDMA_CTLSTAT_DMASETUP_INT_FLAG = 1 << 10,
|
|
PDC_FPDMA_CTLSTAT_SETDB_INT_FLAG = 1 << 11,
|
|
|
|
/* PDC_GLOBAL_CTL bit definitions */
|
|
PDC_PH_ERR = (1 << 8), /* PCI error while loading packet */
|
|
PDC_SH_ERR = (1 << 9), /* PCI error while loading S/G table */
|
|
PDC_DH_ERR = (1 << 10), /* PCI error while loading data */
|
|
PDC2_HTO_ERR = (1 << 12), /* host bus timeout */
|
|
PDC2_ATA_HBA_ERR = (1 << 13), /* error during SATA DATA FIS transmission */
|
|
PDC2_ATA_DMA_CNT_ERR = (1 << 14), /* DMA DATA FIS size differs from S/G count */
|
|
PDC_OVERRUN_ERR = (1 << 19), /* S/G byte count larger than HD requires */
|
|
PDC_UNDERRUN_ERR = (1 << 20), /* S/G byte count less than HD requires */
|
|
PDC_DRIVE_ERR = (1 << 21), /* drive error */
|
|
PDC_PCI_SYS_ERR = (1 << 22), /* PCI system error */
|
|
PDC1_PCI_PARITY_ERR = (1 << 23), /* PCI parity error (from SATA150 driver) */
|
|
PDC1_ERR_MASK = PDC1_PCI_PARITY_ERR,
|
|
PDC2_ERR_MASK = PDC2_HTO_ERR | PDC2_ATA_HBA_ERR |
|
|
PDC2_ATA_DMA_CNT_ERR,
|
|
PDC_ERR_MASK = PDC_PH_ERR | PDC_SH_ERR | PDC_DH_ERR |
|
|
PDC_OVERRUN_ERR | PDC_UNDERRUN_ERR |
|
|
PDC_DRIVE_ERR | PDC_PCI_SYS_ERR |
|
|
PDC1_ERR_MASK | PDC2_ERR_MASK,
|
|
|
|
board_2037x = 0, /* FastTrak S150 TX2plus */
|
|
board_2037x_pata = 1, /* FastTrak S150 TX2plus PATA port */
|
|
board_20319 = 2, /* FastTrak S150 TX4 */
|
|
board_20619 = 3, /* FastTrak TX4000 */
|
|
board_2057x = 4, /* SATAII150 Tx2plus */
|
|
board_2057x_pata = 5, /* SATAII150 Tx2plus PATA port */
|
|
board_40518 = 6, /* SATAII150 Tx4 */
|
|
|
|
PDC_HAS_PATA = (1 << 1), /* PDC20375/20575 has PATA */
|
|
|
|
/* Sequence counter control registers bit definitions */
|
|
PDC_SEQCNTRL_INT_MASK = (1 << 5), /* Sequence Interrupt Mask */
|
|
|
|
/* Feature register values */
|
|
PDC_FEATURE_ATAPI_PIO = 0x00, /* ATAPI data xfer by PIO */
|
|
PDC_FEATURE_ATAPI_DMA = 0x01, /* ATAPI data xfer by DMA */
|
|
|
|
/* Device/Head register values */
|
|
PDC_DEVICE_SATA = 0xE0, /* Device/Head value for SATA devices */
|
|
|
|
/* PDC_CTLSTAT bit definitions */
|
|
PDC_DMA_ENABLE = (1 << 7),
|
|
PDC_IRQ_DISABLE = (1 << 10),
|
|
PDC_RESET = (1 << 11), /* HDMA reset */
|
|
|
|
PDC_COMMON_FLAGS = ATA_FLAG_NO_LEGACY |
|
|
ATA_FLAG_MMIO |
|
|
ATA_FLAG_PIO_POLLING,
|
|
|
|
/* ap->flags bits */
|
|
PDC_FLAG_GEN_II = (1 << 24),
|
|
PDC_FLAG_SATA_PATA = (1 << 25), /* supports SATA + PATA */
|
|
PDC_FLAG_4_PORTS = (1 << 26), /* 4 ports */
|
|
};
|
|
|
|
struct pdc_port_priv {
|
|
u8 *pkt;
|
|
dma_addr_t pkt_dma;
|
|
};
|
|
|
|
static int pdc_sata_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val);
|
|
static int pdc_sata_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val);
|
|
static int pdc_ata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
|
|
static int pdc_common_port_start(struct ata_port *ap);
|
|
static int pdc_sata_port_start(struct ata_port *ap);
|
|
static void pdc_qc_prep(struct ata_queued_cmd *qc);
|
|
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
|
|
static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
|
|
static int pdc_check_atapi_dma(struct ata_queued_cmd *qc);
|
|
static int pdc_old_sata_check_atapi_dma(struct ata_queued_cmd *qc);
|
|
static void pdc_irq_clear(struct ata_port *ap);
|
|
static unsigned int pdc_qc_issue(struct ata_queued_cmd *qc);
|
|
static void pdc_freeze(struct ata_port *ap);
|
|
static void pdc_sata_freeze(struct ata_port *ap);
|
|
static void pdc_thaw(struct ata_port *ap);
|
|
static void pdc_sata_thaw(struct ata_port *ap);
|
|
static int pdc_pata_softreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline);
|
|
static int pdc_sata_hardreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline);
|
|
static void pdc_error_handler(struct ata_port *ap);
|
|
static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
|
|
static int pdc_pata_cable_detect(struct ata_port *ap);
|
|
static int pdc_sata_cable_detect(struct ata_port *ap);
|
|
|
|
static struct scsi_host_template pdc_ata_sht = {
|
|
ATA_BASE_SHT(DRV_NAME),
|
|
.sg_tablesize = PDC_MAX_PRD,
|
|
.dma_boundary = ATA_DMA_BOUNDARY,
|
|
};
|
|
|
|
static const struct ata_port_operations pdc_common_ops = {
|
|
.inherits = &ata_sff_port_ops,
|
|
|
|
.sff_tf_load = pdc_tf_load_mmio,
|
|
.sff_exec_command = pdc_exec_command_mmio,
|
|
.check_atapi_dma = pdc_check_atapi_dma,
|
|
.qc_prep = pdc_qc_prep,
|
|
.qc_issue = pdc_qc_issue,
|
|
|
|
.sff_irq_clear = pdc_irq_clear,
|
|
.lost_interrupt = ATA_OP_NULL,
|
|
|
|
.post_internal_cmd = pdc_post_internal_cmd,
|
|
.error_handler = pdc_error_handler,
|
|
};
|
|
|
|
static struct ata_port_operations pdc_sata_ops = {
|
|
.inherits = &pdc_common_ops,
|
|
.cable_detect = pdc_sata_cable_detect,
|
|
.freeze = pdc_sata_freeze,
|
|
.thaw = pdc_sata_thaw,
|
|
.scr_read = pdc_sata_scr_read,
|
|
.scr_write = pdc_sata_scr_write,
|
|
.port_start = pdc_sata_port_start,
|
|
.hardreset = pdc_sata_hardreset,
|
|
};
|
|
|
|
/* First-generation chips need a more restrictive ->check_atapi_dma op,
|
|
and ->freeze/thaw that ignore the hotplug controls. */
|
|
static struct ata_port_operations pdc_old_sata_ops = {
|
|
.inherits = &pdc_sata_ops,
|
|
.freeze = pdc_freeze,
|
|
.thaw = pdc_thaw,
|
|
.check_atapi_dma = pdc_old_sata_check_atapi_dma,
|
|
};
|
|
|
|
static struct ata_port_operations pdc_pata_ops = {
|
|
.inherits = &pdc_common_ops,
|
|
.cable_detect = pdc_pata_cable_detect,
|
|
.freeze = pdc_freeze,
|
|
.thaw = pdc_thaw,
|
|
.port_start = pdc_common_port_start,
|
|
.softreset = pdc_pata_softreset,
|
|
};
|
|
|
|
static const struct ata_port_info pdc_port_info[] = {
|
|
[board_2037x] =
|
|
{
|
|
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA |
|
|
PDC_FLAG_SATA_PATA,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &pdc_old_sata_ops,
|
|
},
|
|
|
|
[board_2037x_pata] =
|
|
{
|
|
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &pdc_pata_ops,
|
|
},
|
|
|
|
[board_20319] =
|
|
{
|
|
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA |
|
|
PDC_FLAG_4_PORTS,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &pdc_old_sata_ops,
|
|
},
|
|
|
|
[board_20619] =
|
|
{
|
|
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS |
|
|
PDC_FLAG_4_PORTS,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &pdc_pata_ops,
|
|
},
|
|
|
|
[board_2057x] =
|
|
{
|
|
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA |
|
|
PDC_FLAG_GEN_II | PDC_FLAG_SATA_PATA,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &pdc_sata_ops,
|
|
},
|
|
|
|
[board_2057x_pata] =
|
|
{
|
|
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SLAVE_POSS |
|
|
PDC_FLAG_GEN_II,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &pdc_pata_ops,
|
|
},
|
|
|
|
[board_40518] =
|
|
{
|
|
.flags = PDC_COMMON_FLAGS | ATA_FLAG_SATA |
|
|
PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &pdc_sata_ops,
|
|
},
|
|
};
|
|
|
|
static const struct pci_device_id pdc_ata_pci_tbl[] = {
|
|
{ PCI_VDEVICE(PROMISE, 0x3371), board_2037x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3373), board_2037x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3375), board_2037x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3376), board_2037x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3570), board_2057x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3571), board_2057x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3574), board_2057x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3577), board_2057x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3d73), board_2057x },
|
|
{ PCI_VDEVICE(PROMISE, 0x3d75), board_2057x },
|
|
|
|
{ PCI_VDEVICE(PROMISE, 0x3318), board_20319 },
|
|
{ PCI_VDEVICE(PROMISE, 0x3319), board_20319 },
|
|
{ PCI_VDEVICE(PROMISE, 0x3515), board_40518 },
|
|
{ PCI_VDEVICE(PROMISE, 0x3519), board_40518 },
|
|
{ PCI_VDEVICE(PROMISE, 0x3d17), board_40518 },
|
|
{ PCI_VDEVICE(PROMISE, 0x3d18), board_40518 },
|
|
|
|
{ PCI_VDEVICE(PROMISE, 0x6629), board_20619 },
|
|
|
|
{ } /* terminate list */
|
|
};
|
|
|
|
static struct pci_driver pdc_ata_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = pdc_ata_pci_tbl,
|
|
.probe = pdc_ata_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
};
|
|
|
|
static int pdc_common_port_start(struct ata_port *ap)
|
|
{
|
|
struct device *dev = ap->host->dev;
|
|
struct pdc_port_priv *pp;
|
|
int rc;
|
|
|
|
/* we use the same prd table as bmdma, allocate it */
|
|
rc = ata_bmdma_port_start(ap);
|
|
if (rc)
|
|
return rc;
|
|
|
|
pp = devm_kzalloc(dev, sizeof(*pp), GFP_KERNEL);
|
|
if (!pp)
|
|
return -ENOMEM;
|
|
|
|
pp->pkt = dmam_alloc_coherent(dev, 128, &pp->pkt_dma, GFP_KERNEL);
|
|
if (!pp->pkt)
|
|
return -ENOMEM;
|
|
|
|
ap->private_data = pp;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pdc_sata_port_start(struct ata_port *ap)
|
|
{
|
|
int rc;
|
|
|
|
rc = pdc_common_port_start(ap);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* fix up PHYMODE4 align timing */
|
|
if (ap->flags & PDC_FLAG_GEN_II) {
|
|
void __iomem *sata_mmio = ap->ioaddr.scr_addr;
|
|
unsigned int tmp;
|
|
|
|
tmp = readl(sata_mmio + PDC_PHYMODE4);
|
|
tmp = (tmp & ~3) | 1; /* set bits 1:0 = 0:1 */
|
|
writel(tmp, sata_mmio + PDC_PHYMODE4);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void pdc_fpdma_clear_interrupt_flag(struct ata_port *ap)
|
|
{
|
|
void __iomem *sata_mmio = ap->ioaddr.scr_addr;
|
|
u32 tmp;
|
|
|
|
tmp = readl(sata_mmio + PDC_FPDMA_CTLSTAT);
|
|
tmp |= PDC_FPDMA_CTLSTAT_DMASETUP_INT_FLAG;
|
|
tmp |= PDC_FPDMA_CTLSTAT_SETDB_INT_FLAG;
|
|
|
|
/* It's not allowed to write to the entire FPDMA_CTLSTAT register
|
|
when NCQ is running. So do a byte-sized write to bits 10 and 11. */
|
|
writeb(tmp >> 8, sata_mmio + PDC_FPDMA_CTLSTAT + 1);
|
|
readb(sata_mmio + PDC_FPDMA_CTLSTAT + 1); /* flush */
|
|
}
|
|
|
|
static void pdc_fpdma_reset(struct ata_port *ap)
|
|
{
|
|
void __iomem *sata_mmio = ap->ioaddr.scr_addr;
|
|
u8 tmp;
|
|
|
|
tmp = (u8)readl(sata_mmio + PDC_FPDMA_CTLSTAT);
|
|
tmp &= 0x7F;
|
|
tmp |= PDC_FPDMA_CTLSTAT_RESET;
|
|
writeb(tmp, sata_mmio + PDC_FPDMA_CTLSTAT);
|
|
readl(sata_mmio + PDC_FPDMA_CTLSTAT); /* flush */
|
|
udelay(100);
|
|
tmp &= ~PDC_FPDMA_CTLSTAT_RESET;
|
|
writeb(tmp, sata_mmio + PDC_FPDMA_CTLSTAT);
|
|
readl(sata_mmio + PDC_FPDMA_CTLSTAT); /* flush */
|
|
|
|
pdc_fpdma_clear_interrupt_flag(ap);
|
|
}
|
|
|
|
static void pdc_not_at_command_packet_phase(struct ata_port *ap)
|
|
{
|
|
void __iomem *sata_mmio = ap->ioaddr.scr_addr;
|
|
unsigned int i;
|
|
u32 tmp;
|
|
|
|
/* check not at ASIC packet command phase */
|
|
for (i = 0; i < 100; ++i) {
|
|
writel(0, sata_mmio + PDC_INTERNAL_DEBUG_1);
|
|
tmp = readl(sata_mmio + PDC_INTERNAL_DEBUG_2);
|
|
if ((tmp & 0xF) != 1)
|
|
break;
|
|
udelay(100);
|
|
}
|
|
}
|
|
|
|
static void pdc_clear_internal_debug_record_error_register(struct ata_port *ap)
|
|
{
|
|
void __iomem *sata_mmio = ap->ioaddr.scr_addr;
|
|
|
|
writel(0xffffffff, sata_mmio + PDC_SATA_ERROR);
|
|
writel(0xffff0000, sata_mmio + PDC_LINK_LAYER_ERRORS);
|
|
}
|
|
|
|
static void pdc_reset_port(struct ata_port *ap)
|
|
{
|
|
void __iomem *ata_ctlstat_mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT;
|
|
unsigned int i;
|
|
u32 tmp;
|
|
|
|
if (ap->flags & PDC_FLAG_GEN_II)
|
|
pdc_not_at_command_packet_phase(ap);
|
|
|
|
tmp = readl(ata_ctlstat_mmio);
|
|
tmp |= PDC_RESET;
|
|
writel(tmp, ata_ctlstat_mmio);
|
|
|
|
for (i = 11; i > 0; i--) {
|
|
tmp = readl(ata_ctlstat_mmio);
|
|
if (tmp & PDC_RESET)
|
|
break;
|
|
|
|
udelay(100);
|
|
|
|
tmp |= PDC_RESET;
|
|
writel(tmp, ata_ctlstat_mmio);
|
|
}
|
|
|
|
tmp &= ~PDC_RESET;
|
|
writel(tmp, ata_ctlstat_mmio);
|
|
readl(ata_ctlstat_mmio); /* flush */
|
|
|
|
if (sata_scr_valid(&ap->link) && (ap->flags & PDC_FLAG_GEN_II)) {
|
|
pdc_fpdma_reset(ap);
|
|
pdc_clear_internal_debug_record_error_register(ap);
|
|
}
|
|
}
|
|
|
|
static int pdc_pata_cable_detect(struct ata_port *ap)
|
|
{
|
|
u8 tmp;
|
|
void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
|
|
|
|
tmp = readb(ata_mmio + PDC_CTLSTAT + 3);
|
|
if (tmp & 0x01)
|
|
return ATA_CBL_PATA40;
|
|
return ATA_CBL_PATA80;
|
|
}
|
|
|
|
static int pdc_sata_cable_detect(struct ata_port *ap)
|
|
{
|
|
return ATA_CBL_SATA;
|
|
}
|
|
|
|
static int pdc_sata_scr_read(struct ata_link *link,
|
|
unsigned int sc_reg, u32 *val)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return -EINVAL;
|
|
*val = readl(link->ap->ioaddr.scr_addr + (sc_reg * 4));
|
|
return 0;
|
|
}
|
|
|
|
static int pdc_sata_scr_write(struct ata_link *link,
|
|
unsigned int sc_reg, u32 val)
|
|
{
|
|
if (sc_reg > SCR_CONTROL)
|
|
return -EINVAL;
|
|
writel(val, link->ap->ioaddr.scr_addr + (sc_reg * 4));
|
|
return 0;
|
|
}
|
|
|
|
static void pdc_atapi_pkt(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
dma_addr_t sg_table = ap->prd_dma;
|
|
unsigned int cdb_len = qc->dev->cdb_len;
|
|
u8 *cdb = qc->cdb;
|
|
struct pdc_port_priv *pp = ap->private_data;
|
|
u8 *buf = pp->pkt;
|
|
__le32 *buf32 = (__le32 *) buf;
|
|
unsigned int dev_sel, feature;
|
|
|
|
/* set control bits (byte 0), zero delay seq id (byte 3),
|
|
* and seq id (byte 2)
|
|
*/
|
|
switch (qc->tf.protocol) {
|
|
case ATAPI_PROT_DMA:
|
|
if (!(qc->tf.flags & ATA_TFLAG_WRITE))
|
|
buf32[0] = cpu_to_le32(PDC_PKT_READ);
|
|
else
|
|
buf32[0] = 0;
|
|
break;
|
|
case ATAPI_PROT_NODATA:
|
|
buf32[0] = cpu_to_le32(PDC_PKT_NODATA);
|
|
break;
|
|
default:
|
|
BUG();
|
|
break;
|
|
}
|
|
buf32[1] = cpu_to_le32(sg_table); /* S/G table addr */
|
|
buf32[2] = 0; /* no next-packet */
|
|
|
|
/* select drive */
|
|
if (sata_scr_valid(&ap->link))
|
|
dev_sel = PDC_DEVICE_SATA;
|
|
else
|
|
dev_sel = qc->tf.device;
|
|
|
|
buf[12] = (1 << 5) | ATA_REG_DEVICE;
|
|
buf[13] = dev_sel;
|
|
buf[14] = (1 << 5) | ATA_REG_DEVICE | PDC_PKT_CLEAR_BSY;
|
|
buf[15] = dev_sel; /* once more, waiting for BSY to clear */
|
|
|
|
buf[16] = (1 << 5) | ATA_REG_NSECT;
|
|
buf[17] = qc->tf.nsect;
|
|
buf[18] = (1 << 5) | ATA_REG_LBAL;
|
|
buf[19] = qc->tf.lbal;
|
|
|
|
/* set feature and byte counter registers */
|
|
if (qc->tf.protocol != ATAPI_PROT_DMA)
|
|
feature = PDC_FEATURE_ATAPI_PIO;
|
|
else
|
|
feature = PDC_FEATURE_ATAPI_DMA;
|
|
|
|
buf[20] = (1 << 5) | ATA_REG_FEATURE;
|
|
buf[21] = feature;
|
|
buf[22] = (1 << 5) | ATA_REG_BYTEL;
|
|
buf[23] = qc->tf.lbam;
|
|
buf[24] = (1 << 5) | ATA_REG_BYTEH;
|
|
buf[25] = qc->tf.lbah;
|
|
|
|
/* send ATAPI packet command 0xA0 */
|
|
buf[26] = (1 << 5) | ATA_REG_CMD;
|
|
buf[27] = qc->tf.command;
|
|
|
|
/* select drive and check DRQ */
|
|
buf[28] = (1 << 5) | ATA_REG_DEVICE | PDC_PKT_WAIT_DRDY;
|
|
buf[29] = dev_sel;
|
|
|
|
/* we can represent cdb lengths 2/4/6/8/10/12/14/16 */
|
|
BUG_ON(cdb_len & ~0x1E);
|
|
|
|
/* append the CDB as the final part */
|
|
buf[30] = (((cdb_len >> 1) & 7) << 5) | ATA_REG_DATA | PDC_LAST_REG;
|
|
memcpy(buf+31, cdb, cdb_len);
|
|
}
|
|
|
|
/**
|
|
* pdc_fill_sg - Fill PCI IDE PRD table
|
|
* @qc: Metadata associated with taskfile to be transferred
|
|
*
|
|
* Fill PCI IDE PRD (scatter-gather) table with segments
|
|
* associated with the current disk command.
|
|
* Make sure hardware does not choke on it.
|
|
*
|
|
* LOCKING:
|
|
* spin_lock_irqsave(host lock)
|
|
*
|
|
*/
|
|
static void pdc_fill_sg(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct scatterlist *sg;
|
|
const u32 SG_COUNT_ASIC_BUG = 41*4;
|
|
unsigned int si, idx;
|
|
u32 len;
|
|
|
|
if (!(qc->flags & ATA_QCFLAG_DMAMAP))
|
|
return;
|
|
|
|
idx = 0;
|
|
for_each_sg(qc->sg, sg, qc->n_elem, si) {
|
|
u32 addr, offset;
|
|
u32 sg_len;
|
|
|
|
/* determine if physical DMA addr spans 64K boundary.
|
|
* Note h/w doesn't support 64-bit, so we unconditionally
|
|
* truncate dma_addr_t to u32.
|
|
*/
|
|
addr = (u32) sg_dma_address(sg);
|
|
sg_len = sg_dma_len(sg);
|
|
|
|
while (sg_len) {
|
|
offset = addr & 0xffff;
|
|
len = sg_len;
|
|
if ((offset + sg_len) > 0x10000)
|
|
len = 0x10000 - offset;
|
|
|
|
ap->prd[idx].addr = cpu_to_le32(addr);
|
|
ap->prd[idx].flags_len = cpu_to_le32(len & 0xffff);
|
|
VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len);
|
|
|
|
idx++;
|
|
sg_len -= len;
|
|
addr += len;
|
|
}
|
|
}
|
|
|
|
len = le32_to_cpu(ap->prd[idx - 1].flags_len);
|
|
|
|
if (len > SG_COUNT_ASIC_BUG) {
|
|
u32 addr;
|
|
|
|
VPRINTK("Splitting last PRD.\n");
|
|
|
|
addr = le32_to_cpu(ap->prd[idx - 1].addr);
|
|
ap->prd[idx - 1].flags_len = cpu_to_le32(len - SG_COUNT_ASIC_BUG);
|
|
VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx - 1, addr, SG_COUNT_ASIC_BUG);
|
|
|
|
addr = addr + len - SG_COUNT_ASIC_BUG;
|
|
len = SG_COUNT_ASIC_BUG;
|
|
ap->prd[idx].addr = cpu_to_le32(addr);
|
|
ap->prd[idx].flags_len = cpu_to_le32(len);
|
|
VPRINTK("PRD[%u] = (0x%X, 0x%X)\n", idx, addr, len);
|
|
|
|
idx++;
|
|
}
|
|
|
|
ap->prd[idx - 1].flags_len |= cpu_to_le32(ATA_PRD_EOT);
|
|
}
|
|
|
|
static void pdc_qc_prep(struct ata_queued_cmd *qc)
|
|
{
|
|
struct pdc_port_priv *pp = qc->ap->private_data;
|
|
unsigned int i;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_DMA:
|
|
pdc_fill_sg(qc);
|
|
/*FALLTHROUGH*/
|
|
case ATA_PROT_NODATA:
|
|
i = pdc_pkt_header(&qc->tf, qc->ap->prd_dma,
|
|
qc->dev->devno, pp->pkt);
|
|
if (qc->tf.flags & ATA_TFLAG_LBA48)
|
|
i = pdc_prep_lba48(&qc->tf, pp->pkt, i);
|
|
else
|
|
i = pdc_prep_lba28(&qc->tf, pp->pkt, i);
|
|
pdc_pkt_footer(&qc->tf, pp->pkt, i);
|
|
break;
|
|
case ATAPI_PROT_PIO:
|
|
pdc_fill_sg(qc);
|
|
break;
|
|
case ATAPI_PROT_DMA:
|
|
pdc_fill_sg(qc);
|
|
/*FALLTHROUGH*/
|
|
case ATAPI_PROT_NODATA:
|
|
pdc_atapi_pkt(qc);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int pdc_is_sataii_tx4(unsigned long flags)
|
|
{
|
|
const unsigned long mask = PDC_FLAG_GEN_II | PDC_FLAG_4_PORTS;
|
|
return (flags & mask) == mask;
|
|
}
|
|
|
|
static unsigned int pdc_port_no_to_ata_no(unsigned int port_no,
|
|
int is_sataii_tx4)
|
|
{
|
|
static const unsigned char sataii_tx4_port_remap[4] = { 3, 1, 0, 2};
|
|
return is_sataii_tx4 ? sataii_tx4_port_remap[port_no] : port_no;
|
|
}
|
|
|
|
static unsigned int pdc_sata_nr_ports(const struct ata_port *ap)
|
|
{
|
|
return (ap->flags & PDC_FLAG_4_PORTS) ? 4 : 2;
|
|
}
|
|
|
|
static unsigned int pdc_sata_ata_port_to_ata_no(const struct ata_port *ap)
|
|
{
|
|
const struct ata_host *host = ap->host;
|
|
unsigned int nr_ports = pdc_sata_nr_ports(ap);
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < nr_ports && host->ports[i] != ap; ++i)
|
|
;
|
|
BUG_ON(i >= nr_ports);
|
|
return pdc_port_no_to_ata_no(i, pdc_is_sataii_tx4(ap->flags));
|
|
}
|
|
|
|
static void pdc_freeze(struct ata_port *ap)
|
|
{
|
|
void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
|
|
u32 tmp;
|
|
|
|
tmp = readl(ata_mmio + PDC_CTLSTAT);
|
|
tmp |= PDC_IRQ_DISABLE;
|
|
tmp &= ~PDC_DMA_ENABLE;
|
|
writel(tmp, ata_mmio + PDC_CTLSTAT);
|
|
readl(ata_mmio + PDC_CTLSTAT); /* flush */
|
|
}
|
|
|
|
static void pdc_sata_freeze(struct ata_port *ap)
|
|
{
|
|
struct ata_host *host = ap->host;
|
|
void __iomem *host_mmio = host->iomap[PDC_MMIO_BAR];
|
|
unsigned int hotplug_offset = PDC2_SATA_PLUG_CSR;
|
|
unsigned int ata_no = pdc_sata_ata_port_to_ata_no(ap);
|
|
u32 hotplug_status;
|
|
|
|
/* Disable hotplug events on this port.
|
|
*
|
|
* Locking:
|
|
* 1) hotplug register accesses must be serialised via host->lock
|
|
* 2) ap->lock == &ap->host->lock
|
|
* 3) ->freeze() and ->thaw() are called with ap->lock held
|
|
*/
|
|
hotplug_status = readl(host_mmio + hotplug_offset);
|
|
hotplug_status |= 0x11 << (ata_no + 16);
|
|
writel(hotplug_status, host_mmio + hotplug_offset);
|
|
readl(host_mmio + hotplug_offset); /* flush */
|
|
|
|
pdc_freeze(ap);
|
|
}
|
|
|
|
static void pdc_thaw(struct ata_port *ap)
|
|
{
|
|
void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
|
|
u32 tmp;
|
|
|
|
/* clear IRQ */
|
|
readl(ata_mmio + PDC_COMMAND);
|
|
|
|
/* turn IRQ back on */
|
|
tmp = readl(ata_mmio + PDC_CTLSTAT);
|
|
tmp &= ~PDC_IRQ_DISABLE;
|
|
writel(tmp, ata_mmio + PDC_CTLSTAT);
|
|
readl(ata_mmio + PDC_CTLSTAT); /* flush */
|
|
}
|
|
|
|
static void pdc_sata_thaw(struct ata_port *ap)
|
|
{
|
|
struct ata_host *host = ap->host;
|
|
void __iomem *host_mmio = host->iomap[PDC_MMIO_BAR];
|
|
unsigned int hotplug_offset = PDC2_SATA_PLUG_CSR;
|
|
unsigned int ata_no = pdc_sata_ata_port_to_ata_no(ap);
|
|
u32 hotplug_status;
|
|
|
|
pdc_thaw(ap);
|
|
|
|
/* Enable hotplug events on this port.
|
|
* Locking: see pdc_sata_freeze().
|
|
*/
|
|
hotplug_status = readl(host_mmio + hotplug_offset);
|
|
hotplug_status |= 0x11 << ata_no;
|
|
hotplug_status &= ~(0x11 << (ata_no + 16));
|
|
writel(hotplug_status, host_mmio + hotplug_offset);
|
|
readl(host_mmio + hotplug_offset); /* flush */
|
|
}
|
|
|
|
static int pdc_pata_softreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
pdc_reset_port(link->ap);
|
|
return ata_sff_softreset(link, class, deadline);
|
|
}
|
|
|
|
static unsigned int pdc_ata_port_to_ata_no(const struct ata_port *ap)
|
|
{
|
|
void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
|
|
void __iomem *host_mmio = ap->host->iomap[PDC_MMIO_BAR];
|
|
|
|
/* ata_mmio == host_mmio + 0x200 + ata_no * 0x80 */
|
|
return (ata_mmio - host_mmio - 0x200) / 0x80;
|
|
}
|
|
|
|
static void pdc_hard_reset_port(struct ata_port *ap)
|
|
{
|
|
void __iomem *host_mmio = ap->host->iomap[PDC_MMIO_BAR];
|
|
void __iomem *pcictl_b1_mmio = host_mmio + PDC_PCI_CTL + 1;
|
|
unsigned int ata_no = pdc_ata_port_to_ata_no(ap);
|
|
u8 tmp;
|
|
|
|
spin_lock(&ap->host->lock);
|
|
|
|
tmp = readb(pcictl_b1_mmio);
|
|
tmp &= ~(0x10 << ata_no);
|
|
writeb(tmp, pcictl_b1_mmio);
|
|
readb(pcictl_b1_mmio); /* flush */
|
|
udelay(100);
|
|
tmp |= (0x10 << ata_no);
|
|
writeb(tmp, pcictl_b1_mmio);
|
|
readb(pcictl_b1_mmio); /* flush */
|
|
|
|
spin_unlock(&ap->host->lock);
|
|
}
|
|
|
|
static int pdc_sata_hardreset(struct ata_link *link, unsigned int *class,
|
|
unsigned long deadline)
|
|
{
|
|
if (link->ap->flags & PDC_FLAG_GEN_II)
|
|
pdc_not_at_command_packet_phase(link->ap);
|
|
/* hotplug IRQs should have been masked by pdc_sata_freeze() */
|
|
pdc_hard_reset_port(link->ap);
|
|
pdc_reset_port(link->ap);
|
|
|
|
/* sata_promise can't reliably acquire the first D2H Reg FIS
|
|
* after hardreset. Do non-waiting hardreset and request
|
|
* follow-up SRST.
|
|
*/
|
|
return sata_std_hardreset(link, class, deadline);
|
|
}
|
|
|
|
static void pdc_error_handler(struct ata_port *ap)
|
|
{
|
|
if (!(ap->pflags & ATA_PFLAG_FROZEN))
|
|
pdc_reset_port(ap);
|
|
|
|
ata_std_error_handler(ap);
|
|
}
|
|
|
|
static void pdc_post_internal_cmd(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
|
|
/* make DMA engine forget about the failed command */
|
|
if (qc->flags & ATA_QCFLAG_FAILED)
|
|
pdc_reset_port(ap);
|
|
}
|
|
|
|
static void pdc_error_intr(struct ata_port *ap, struct ata_queued_cmd *qc,
|
|
u32 port_status, u32 err_mask)
|
|
{
|
|
struct ata_eh_info *ehi = &ap->link.eh_info;
|
|
unsigned int ac_err_mask = 0;
|
|
|
|
ata_ehi_clear_desc(ehi);
|
|
ata_ehi_push_desc(ehi, "port_status 0x%08x", port_status);
|
|
port_status &= err_mask;
|
|
|
|
if (port_status & PDC_DRIVE_ERR)
|
|
ac_err_mask |= AC_ERR_DEV;
|
|
if (port_status & (PDC_OVERRUN_ERR | PDC_UNDERRUN_ERR))
|
|
ac_err_mask |= AC_ERR_OTHER;
|
|
if (port_status & (PDC2_ATA_HBA_ERR | PDC2_ATA_DMA_CNT_ERR))
|
|
ac_err_mask |= AC_ERR_ATA_BUS;
|
|
if (port_status & (PDC_PH_ERR | PDC_SH_ERR | PDC_DH_ERR | PDC2_HTO_ERR
|
|
| PDC_PCI_SYS_ERR | PDC1_PCI_PARITY_ERR))
|
|
ac_err_mask |= AC_ERR_HOST_BUS;
|
|
|
|
if (sata_scr_valid(&ap->link)) {
|
|
u32 serror;
|
|
|
|
pdc_sata_scr_read(&ap->link, SCR_ERROR, &serror);
|
|
ehi->serror |= serror;
|
|
}
|
|
|
|
qc->err_mask |= ac_err_mask;
|
|
|
|
pdc_reset_port(ap);
|
|
|
|
ata_port_abort(ap);
|
|
}
|
|
|
|
static unsigned int pdc_host_intr(struct ata_port *ap,
|
|
struct ata_queued_cmd *qc)
|
|
{
|
|
unsigned int handled = 0;
|
|
void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
|
|
u32 port_status, err_mask;
|
|
|
|
err_mask = PDC_ERR_MASK;
|
|
if (ap->flags & PDC_FLAG_GEN_II)
|
|
err_mask &= ~PDC1_ERR_MASK;
|
|
else
|
|
err_mask &= ~PDC2_ERR_MASK;
|
|
port_status = readl(ata_mmio + PDC_GLOBAL_CTL);
|
|
if (unlikely(port_status & err_mask)) {
|
|
pdc_error_intr(ap, qc, port_status, err_mask);
|
|
return 1;
|
|
}
|
|
|
|
switch (qc->tf.protocol) {
|
|
case ATA_PROT_DMA:
|
|
case ATA_PROT_NODATA:
|
|
case ATAPI_PROT_DMA:
|
|
case ATAPI_PROT_NODATA:
|
|
qc->err_mask |= ac_err_mask(ata_wait_idle(ap));
|
|
ata_qc_complete(qc);
|
|
handled = 1;
|
|
break;
|
|
default:
|
|
ap->stats.idle_irq++;
|
|
break;
|
|
}
|
|
|
|
return handled;
|
|
}
|
|
|
|
static void pdc_irq_clear(struct ata_port *ap)
|
|
{
|
|
void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
|
|
|
|
readl(ata_mmio + PDC_COMMAND);
|
|
}
|
|
|
|
static irqreturn_t pdc_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct ata_host *host = dev_instance;
|
|
struct ata_port *ap;
|
|
u32 mask = 0;
|
|
unsigned int i, tmp;
|
|
unsigned int handled = 0;
|
|
void __iomem *host_mmio;
|
|
unsigned int hotplug_offset, ata_no;
|
|
u32 hotplug_status;
|
|
int is_sataii_tx4;
|
|
|
|
VPRINTK("ENTER\n");
|
|
|
|
if (!host || !host->iomap[PDC_MMIO_BAR]) {
|
|
VPRINTK("QUICK EXIT\n");
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
host_mmio = host->iomap[PDC_MMIO_BAR];
|
|
|
|
spin_lock(&host->lock);
|
|
|
|
/* read and clear hotplug flags for all ports */
|
|
if (host->ports[0]->flags & PDC_FLAG_GEN_II) {
|
|
hotplug_offset = PDC2_SATA_PLUG_CSR;
|
|
hotplug_status = readl(host_mmio + hotplug_offset);
|
|
if (hotplug_status & 0xff)
|
|
writel(hotplug_status | 0xff, host_mmio + hotplug_offset);
|
|
hotplug_status &= 0xff; /* clear uninteresting bits */
|
|
} else
|
|
hotplug_status = 0;
|
|
|
|
/* reading should also clear interrupts */
|
|
mask = readl(host_mmio + PDC_INT_SEQMASK);
|
|
|
|
if (mask == 0xffffffff && hotplug_status == 0) {
|
|
VPRINTK("QUICK EXIT 2\n");
|
|
goto done_irq;
|
|
}
|
|
|
|
mask &= 0xffff; /* only 16 SEQIDs possible */
|
|
if (mask == 0 && hotplug_status == 0) {
|
|
VPRINTK("QUICK EXIT 3\n");
|
|
goto done_irq;
|
|
}
|
|
|
|
writel(mask, host_mmio + PDC_INT_SEQMASK);
|
|
|
|
is_sataii_tx4 = pdc_is_sataii_tx4(host->ports[0]->flags);
|
|
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
VPRINTK("port %u\n", i);
|
|
ap = host->ports[i];
|
|
|
|
/* check for a plug or unplug event */
|
|
ata_no = pdc_port_no_to_ata_no(i, is_sataii_tx4);
|
|
tmp = hotplug_status & (0x11 << ata_no);
|
|
if (tmp) {
|
|
struct ata_eh_info *ehi = &ap->link.eh_info;
|
|
ata_ehi_clear_desc(ehi);
|
|
ata_ehi_hotplugged(ehi);
|
|
ata_ehi_push_desc(ehi, "hotplug_status %#x", tmp);
|
|
ata_port_freeze(ap);
|
|
++handled;
|
|
continue;
|
|
}
|
|
|
|
/* check for a packet interrupt */
|
|
tmp = mask & (1 << (i + 1));
|
|
if (tmp) {
|
|
struct ata_queued_cmd *qc;
|
|
|
|
qc = ata_qc_from_tag(ap, ap->link.active_tag);
|
|
if (qc && (!(qc->tf.flags & ATA_TFLAG_POLLING)))
|
|
handled += pdc_host_intr(ap, qc);
|
|
}
|
|
}
|
|
|
|
VPRINTK("EXIT\n");
|
|
|
|
done_irq:
|
|
spin_unlock(&host->lock);
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static void pdc_packet_start(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct pdc_port_priv *pp = ap->private_data;
|
|
void __iomem *host_mmio = ap->host->iomap[PDC_MMIO_BAR];
|
|
void __iomem *ata_mmio = ap->ioaddr.cmd_addr;
|
|
unsigned int port_no = ap->port_no;
|
|
u8 seq = (u8) (port_no + 1);
|
|
|
|
VPRINTK("ENTER, ap %p\n", ap);
|
|
|
|
writel(0x00000001, host_mmio + (seq * 4));
|
|
readl(host_mmio + (seq * 4)); /* flush */
|
|
|
|
pp->pkt[2] = seq;
|
|
wmb(); /* flush PRD, pkt writes */
|
|
writel(pp->pkt_dma, ata_mmio + PDC_PKT_SUBMIT);
|
|
readl(ata_mmio + PDC_PKT_SUBMIT); /* flush */
|
|
}
|
|
|
|
static unsigned int pdc_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
switch (qc->tf.protocol) {
|
|
case ATAPI_PROT_NODATA:
|
|
if (qc->dev->flags & ATA_DFLAG_CDB_INTR)
|
|
break;
|
|
/*FALLTHROUGH*/
|
|
case ATA_PROT_NODATA:
|
|
if (qc->tf.flags & ATA_TFLAG_POLLING)
|
|
break;
|
|
/*FALLTHROUGH*/
|
|
case ATAPI_PROT_DMA:
|
|
case ATA_PROT_DMA:
|
|
pdc_packet_start(qc);
|
|
return 0;
|
|
default:
|
|
break;
|
|
}
|
|
return ata_sff_qc_issue(qc);
|
|
}
|
|
|
|
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
|
|
{
|
|
WARN_ON(tf->protocol == ATA_PROT_DMA || tf->protocol == ATAPI_PROT_DMA);
|
|
ata_sff_tf_load(ap, tf);
|
|
}
|
|
|
|
static void pdc_exec_command_mmio(struct ata_port *ap,
|
|
const struct ata_taskfile *tf)
|
|
{
|
|
WARN_ON(tf->protocol == ATA_PROT_DMA || tf->protocol == ATAPI_PROT_DMA);
|
|
ata_sff_exec_command(ap, tf);
|
|
}
|
|
|
|
static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)
|
|
{
|
|
u8 *scsicmd = qc->scsicmd->cmnd;
|
|
int pio = 1; /* atapi dma off by default */
|
|
|
|
/* Whitelist commands that may use DMA. */
|
|
switch (scsicmd[0]) {
|
|
case WRITE_12:
|
|
case WRITE_10:
|
|
case WRITE_6:
|
|
case READ_12:
|
|
case READ_10:
|
|
case READ_6:
|
|
case 0xad: /* READ_DVD_STRUCTURE */
|
|
case 0xbe: /* READ_CD */
|
|
pio = 0;
|
|
}
|
|
/* -45150 (FFFF4FA2) to -1 (FFFFFFFF) shall use PIO mode */
|
|
if (scsicmd[0] == WRITE_10) {
|
|
unsigned int lba =
|
|
(scsicmd[2] << 24) |
|
|
(scsicmd[3] << 16) |
|
|
(scsicmd[4] << 8) |
|
|
scsicmd[5];
|
|
if (lba >= 0xFFFF4FA2)
|
|
pio = 1;
|
|
}
|
|
return pio;
|
|
}
|
|
|
|
static int pdc_old_sata_check_atapi_dma(struct ata_queued_cmd *qc)
|
|
{
|
|
/* First generation chips cannot use ATAPI DMA on SATA ports */
|
|
return 1;
|
|
}
|
|
|
|
static void pdc_ata_setup_port(struct ata_port *ap,
|
|
void __iomem *base, void __iomem *scr_addr)
|
|
{
|
|
ap->ioaddr.cmd_addr = base;
|
|
ap->ioaddr.data_addr = base;
|
|
ap->ioaddr.feature_addr =
|
|
ap->ioaddr.error_addr = base + 0x4;
|
|
ap->ioaddr.nsect_addr = base + 0x8;
|
|
ap->ioaddr.lbal_addr = base + 0xc;
|
|
ap->ioaddr.lbam_addr = base + 0x10;
|
|
ap->ioaddr.lbah_addr = base + 0x14;
|
|
ap->ioaddr.device_addr = base + 0x18;
|
|
ap->ioaddr.command_addr =
|
|
ap->ioaddr.status_addr = base + 0x1c;
|
|
ap->ioaddr.altstatus_addr =
|
|
ap->ioaddr.ctl_addr = base + 0x38;
|
|
ap->ioaddr.scr_addr = scr_addr;
|
|
}
|
|
|
|
static void pdc_host_init(struct ata_host *host)
|
|
{
|
|
void __iomem *host_mmio = host->iomap[PDC_MMIO_BAR];
|
|
int is_gen2 = host->ports[0]->flags & PDC_FLAG_GEN_II;
|
|
int hotplug_offset;
|
|
u32 tmp;
|
|
|
|
if (is_gen2)
|
|
hotplug_offset = PDC2_SATA_PLUG_CSR;
|
|
else
|
|
hotplug_offset = PDC_SATA_PLUG_CSR;
|
|
|
|
/*
|
|
* Except for the hotplug stuff, this is voodoo from the
|
|
* Promise driver. Label this entire section
|
|
* "TODO: figure out why we do this"
|
|
*/
|
|
|
|
/* enable BMR_BURST, maybe change FIFO_SHD to 8 dwords */
|
|
tmp = readl(host_mmio + PDC_FLASH_CTL);
|
|
tmp |= 0x02000; /* bit 13 (enable bmr burst) */
|
|
if (!is_gen2)
|
|
tmp |= 0x10000; /* bit 16 (fifo threshold at 8 dw) */
|
|
writel(tmp, host_mmio + PDC_FLASH_CTL);
|
|
|
|
/* clear plug/unplug flags for all ports */
|
|
tmp = readl(host_mmio + hotplug_offset);
|
|
writel(tmp | 0xff, host_mmio + hotplug_offset);
|
|
|
|
tmp = readl(host_mmio + hotplug_offset);
|
|
if (is_gen2) /* unmask plug/unplug ints */
|
|
writel(tmp & ~0xff0000, host_mmio + hotplug_offset);
|
|
else /* mask plug/unplug ints */
|
|
writel(tmp | 0xff0000, host_mmio + hotplug_offset);
|
|
|
|
/* don't initialise TBG or SLEW on 2nd generation chips */
|
|
if (is_gen2)
|
|
return;
|
|
|
|
/* reduce TBG clock to 133 Mhz. */
|
|
tmp = readl(host_mmio + PDC_TBG_MODE);
|
|
tmp &= ~0x30000; /* clear bit 17, 16*/
|
|
tmp |= 0x10000; /* set bit 17:16 = 0:1 */
|
|
writel(tmp, host_mmio + PDC_TBG_MODE);
|
|
|
|
readl(host_mmio + PDC_TBG_MODE); /* flush */
|
|
msleep(10);
|
|
|
|
/* adjust slew rate control register. */
|
|
tmp = readl(host_mmio + PDC_SLEW_CTL);
|
|
tmp &= 0xFFFFF03F; /* clear bit 11 ~ 6 */
|
|
tmp |= 0x00000900; /* set bit 11-9 = 100b , bit 8-6 = 100 */
|
|
writel(tmp, host_mmio + PDC_SLEW_CTL);
|
|
}
|
|
|
|
static int pdc_ata_init_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
static int printed_version;
|
|
const struct ata_port_info *pi = &pdc_port_info[ent->driver_data];
|
|
const struct ata_port_info *ppi[PDC_MAX_PORTS];
|
|
struct ata_host *host;
|
|
void __iomem *host_mmio;
|
|
int n_ports, i, rc;
|
|
int is_sataii_tx4;
|
|
|
|
if (!printed_version++)
|
|
dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
|
|
|
|
/* enable and acquire resources */
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
rc = pcim_iomap_regions(pdev, 1 << PDC_MMIO_BAR, DRV_NAME);
|
|
if (rc == -EBUSY)
|
|
pcim_pin_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
host_mmio = pcim_iomap_table(pdev)[PDC_MMIO_BAR];
|
|
|
|
/* determine port configuration and setup host */
|
|
n_ports = 2;
|
|
if (pi->flags & PDC_FLAG_4_PORTS)
|
|
n_ports = 4;
|
|
for (i = 0; i < n_ports; i++)
|
|
ppi[i] = pi;
|
|
|
|
if (pi->flags & PDC_FLAG_SATA_PATA) {
|
|
u8 tmp = readb(host_mmio + PDC_FLASH_CTL + 1);
|
|
if (!(tmp & 0x80))
|
|
ppi[n_ports++] = pi + 1;
|
|
}
|
|
|
|
host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports);
|
|
if (!host) {
|
|
dev_printk(KERN_ERR, &pdev->dev, "failed to allocate host\n");
|
|
return -ENOMEM;
|
|
}
|
|
host->iomap = pcim_iomap_table(pdev);
|
|
|
|
is_sataii_tx4 = pdc_is_sataii_tx4(pi->flags);
|
|
for (i = 0; i < host->n_ports; i++) {
|
|
struct ata_port *ap = host->ports[i];
|
|
unsigned int ata_no = pdc_port_no_to_ata_no(i, is_sataii_tx4);
|
|
unsigned int ata_offset = 0x200 + ata_no * 0x80;
|
|
unsigned int scr_offset = 0x400 + ata_no * 0x100;
|
|
|
|
pdc_ata_setup_port(ap, host_mmio + ata_offset, host_mmio + scr_offset);
|
|
|
|
ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio");
|
|
ata_port_pbar_desc(ap, PDC_MMIO_BAR, ata_offset, "ata");
|
|
}
|
|
|
|
/* initialize adapter */
|
|
pdc_host_init(host);
|
|
|
|
rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
|
|
if (rc)
|
|
return rc;
|
|
|
|
/* start host, request IRQ and attach */
|
|
pci_set_master(pdev);
|
|
return ata_host_activate(host, pdev->irq, pdc_interrupt, IRQF_SHARED,
|
|
&pdc_ata_sht);
|
|
}
|
|
|
|
static int __init pdc_ata_init(void)
|
|
{
|
|
return pci_register_driver(&pdc_ata_pci_driver);
|
|
}
|
|
|
|
static void __exit pdc_ata_exit(void)
|
|
{
|
|
pci_unregister_driver(&pdc_ata_pci_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Jeff Garzik");
|
|
MODULE_DESCRIPTION("Promise ATA TX2/TX4/TX4000 low-level driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, pdc_ata_pci_tbl);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(pdc_ata_init);
|
|
module_exit(pdc_ata_exit);
|