linux_dsm_epyc7002/arch/powerpc/boot/dts/iss4xx-mpic.dts
Torez Smith b4e8c8dd84 powerpc/4xx: Simple platform for the ISS 4xx simulator
This is a trivial 4xx plaform that uses the new simple bsp from
Josh and is handy to use in simulators such as ISS or even Mambo
who don't properly implement most of the actual devices in the
SoC but really only the core.

Signed-off-by: Torez Smith  <lnxtorez@linux.vnet.ibm.com>
Signed-off-by: Dave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: Josh Boyer <jwboyer@linux.vnet.ibm.com>
2010-05-05 11:11:56 -04:00

156 lines
3.8 KiB
Plaintext

/*
* Device Tree Source for IBM Embedded PPC 476 Platform
*
* Copyright 2010 Torez Smith, IBM Corporation.
*
* Based on earlier code:
* Copyright (c) 2006, 2007 IBM Corp.
* Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*/
/dts-v1/;
/memreserve/ 0x01f00000 0x00100000;
/ {
#address-cells = <2>;
#size-cells = <1>;
model = "ibm,iss-4xx";
compatible = "ibm,iss-4xx";
dcr-parent = <&{/cpus/cpu@0}>;
aliases {
serial0 = &UART0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
model = "PowerPC,4xx"; // real CPU changed in sim
reg = <0>;
clock-frequency = <100000000>; // 100Mhz :-)
timebase-frequency = <100000000>;
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
status = "ok";
};
cpu@1 {
device_type = "cpu";
model = "PowerPC,4xx"; // real CPU changed in sim
reg = <1>;
clock-frequency = <100000000>; // 100Mhz :-)
timebase-frequency = <100000000>;
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
status = "disabled";
enable-method = "spin-table";
cpu-release-addr = <0 0x01f00100>;
};
cpu@2 {
device_type = "cpu";
model = "PowerPC,4xx"; // real CPU changed in sim
reg = <2>;
clock-frequency = <100000000>; // 100Mhz :-)
timebase-frequency = <100000000>;
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
status = "disabled";
enable-method = "spin-table";
cpu-release-addr = <0 0x01f00200>;
};
cpu@3 {
device_type = "cpu";
model = "PowerPC,4xx"; // real CPU changed in sim
reg = <3>;
clock-frequency = <100000000>; // 100Mhz :-)
timebase-frequency = <100000000>;
i-cache-line-size = <32>;
d-cache-line-size = <32>;
i-cache-size = <32768>;
d-cache-size = <32768>;
dcr-controller;
dcr-access-method = "native";
status = "disabled";
enable-method = "spin-table";
cpu-release-addr = <0 0x01f00300>;
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000>; // Filled in by zImage
};
MPIC: interrupt-controller {
compatible = "chrp,open-pic";
interrupt-controller;
dcr-reg = <0xffc00000 0x00030000>;
#address-cells = <0>;
#size-cells = <0>;
#interrupt-cells = <2>;
};
plb {
compatible = "ibm,plb-4xx", "ibm,plb4"; /* Could be PLB6, doesn't matter */
#address-cells = <2>;
#size-cells = <1>;
ranges;
clock-frequency = <0>; // Filled in by zImage
POB0: opb {
compatible = "ibm,opb-4xx", "ibm,opb";
#address-cells = <1>;
#size-cells = <1>;
/* Wish there was a nicer way of specifying a full 32-bit
range */
ranges = <0x00000000 0x00000001 0x00000000 0x80000000
0x80000000 0x00000001 0x80000000 0x80000000>;
clock-frequency = <0>; // Filled in by zImage
UART0: serial@40000200 {
device_type = "serial";
compatible = "ns16550a";
reg = <0x40000200 0x00000008>;
virtual-reg = <0xe0000200>;
clock-frequency = <11059200>;
current-speed = <115200>;
interrupt-parent = <&MPIC>;
interrupts = <0x0 0x2>;
};
};
};
nvrtc {
compatible = "ds1743-nvram", "ds1743", "rtc-ds1743";
reg = <0 0xEF703000 0x2000>;
};
iss-block {
compatible = "ibm,iss-sim-block-device";
reg = <0 0xEF701000 0x1000>;
};
chosen {
linux,stdout-path = "/plb/opb/serial@40000200";
};
};