mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 12:05:10 +07:00
62931ac2f9
Since commitabf4923e97
("i2c: mediatek: disable zero-length transfers for mt8183"), there is a NULL pointer dereference for all the SoCs that don't have any quirk. mtk_i2c_functionality is not checking that the quirks pointer is not NULL before starting to use it. This commit add a call to i2c_check_quirks which will check whether the quirks pointer is set, and if so will check if the IP has the NO_ZERO_LEN quirk. Fixes:abf4923e97
("i2c: mediatek: disable zero-length transfers for mt8183") Signed-off-by: Fabien Parent <fparent@baylibre.com> Reviewed-by: Cengiz Can <cengiz@kernel.wtf> Reviewed-by: Hsin-Yi Wang <hsinyi@chromium.org> Tested-by: Ulrich Hecht <uli@fpond.eu> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
1076 lines
27 KiB
C
1076 lines
27 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* Copyright (c) 2014 MediaTek Inc.
|
|
* Author: Xudong Chen <xudong.chen@mediatek.com>
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/device.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/err.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/scatterlist.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/slab.h>
|
|
|
|
#define I2C_RS_TRANSFER (1 << 4)
|
|
#define I2C_ARB_LOST (1 << 3)
|
|
#define I2C_HS_NACKERR (1 << 2)
|
|
#define I2C_ACKERR (1 << 1)
|
|
#define I2C_TRANSAC_COMP (1 << 0)
|
|
#define I2C_TRANSAC_START (1 << 0)
|
|
#define I2C_RS_MUL_CNFG (1 << 15)
|
|
#define I2C_RS_MUL_TRIG (1 << 14)
|
|
#define I2C_DCM_DISABLE 0x0000
|
|
#define I2C_IO_CONFIG_OPEN_DRAIN 0x0003
|
|
#define I2C_IO_CONFIG_PUSH_PULL 0x0000
|
|
#define I2C_SOFT_RST 0x0001
|
|
#define I2C_FIFO_ADDR_CLR 0x0001
|
|
#define I2C_DELAY_LEN 0x0002
|
|
#define I2C_ST_START_CON 0x8001
|
|
#define I2C_FS_START_CON 0x1800
|
|
#define I2C_TIME_CLR_VALUE 0x0000
|
|
#define I2C_TIME_DEFAULT_VALUE 0x0003
|
|
#define I2C_WRRD_TRANAC_VALUE 0x0002
|
|
#define I2C_RD_TRANAC_VALUE 0x0001
|
|
|
|
#define I2C_DMA_CON_TX 0x0000
|
|
#define I2C_DMA_CON_RX 0x0001
|
|
#define I2C_DMA_START_EN 0x0001
|
|
#define I2C_DMA_INT_FLAG_NONE 0x0000
|
|
#define I2C_DMA_CLR_FLAG 0x0000
|
|
#define I2C_DMA_HARD_RST 0x0002
|
|
#define I2C_DMA_4G_MODE 0x0001
|
|
|
|
#define I2C_DEFAULT_CLK_DIV 5
|
|
#define I2C_DEFAULT_SPEED 100000 /* hz */
|
|
#define MAX_FS_MODE_SPEED 400000
|
|
#define MAX_HS_MODE_SPEED 3400000
|
|
#define MAX_SAMPLE_CNT_DIV 8
|
|
#define MAX_STEP_CNT_DIV 64
|
|
#define MAX_HS_STEP_CNT_DIV 8
|
|
|
|
#define I2C_CONTROL_RS (0x1 << 1)
|
|
#define I2C_CONTROL_DMA_EN (0x1 << 2)
|
|
#define I2C_CONTROL_CLK_EXT_EN (0x1 << 3)
|
|
#define I2C_CONTROL_DIR_CHANGE (0x1 << 4)
|
|
#define I2C_CONTROL_ACKERR_DET_EN (0x1 << 5)
|
|
#define I2C_CONTROL_TRANSFER_LEN_CHANGE (0x1 << 6)
|
|
#define I2C_CONTROL_DMAACK_EN (0x1 << 8)
|
|
#define I2C_CONTROL_ASYNC_MODE (0x1 << 9)
|
|
#define I2C_CONTROL_WRAPPER (0x1 << 0)
|
|
|
|
#define I2C_DRV_NAME "i2c-mt65xx"
|
|
|
|
enum DMA_REGS_OFFSET {
|
|
OFFSET_INT_FLAG = 0x0,
|
|
OFFSET_INT_EN = 0x04,
|
|
OFFSET_EN = 0x08,
|
|
OFFSET_RST = 0x0c,
|
|
OFFSET_CON = 0x18,
|
|
OFFSET_TX_MEM_ADDR = 0x1c,
|
|
OFFSET_RX_MEM_ADDR = 0x20,
|
|
OFFSET_TX_LEN = 0x24,
|
|
OFFSET_RX_LEN = 0x28,
|
|
OFFSET_TX_4G_MODE = 0x54,
|
|
OFFSET_RX_4G_MODE = 0x58,
|
|
};
|
|
|
|
enum i2c_trans_st_rs {
|
|
I2C_TRANS_STOP = 0,
|
|
I2C_TRANS_REPEATED_START,
|
|
};
|
|
|
|
enum mtk_trans_op {
|
|
I2C_MASTER_WR = 1,
|
|
I2C_MASTER_RD,
|
|
I2C_MASTER_WRRD,
|
|
};
|
|
|
|
enum I2C_REGS_OFFSET {
|
|
OFFSET_DATA_PORT,
|
|
OFFSET_SLAVE_ADDR,
|
|
OFFSET_INTR_MASK,
|
|
OFFSET_INTR_STAT,
|
|
OFFSET_CONTROL,
|
|
OFFSET_TRANSFER_LEN,
|
|
OFFSET_TRANSAC_LEN,
|
|
OFFSET_DELAY_LEN,
|
|
OFFSET_TIMING,
|
|
OFFSET_START,
|
|
OFFSET_EXT_CONF,
|
|
OFFSET_FIFO_STAT,
|
|
OFFSET_FIFO_THRESH,
|
|
OFFSET_FIFO_ADDR_CLR,
|
|
OFFSET_IO_CONFIG,
|
|
OFFSET_RSV_DEBUG,
|
|
OFFSET_HS,
|
|
OFFSET_SOFTRESET,
|
|
OFFSET_DCM_EN,
|
|
OFFSET_PATH_DIR,
|
|
OFFSET_DEBUGSTAT,
|
|
OFFSET_DEBUGCTRL,
|
|
OFFSET_TRANSFER_LEN_AUX,
|
|
OFFSET_CLOCK_DIV,
|
|
OFFSET_LTIMING,
|
|
};
|
|
|
|
static const u16 mt_i2c_regs_v1[] = {
|
|
[OFFSET_DATA_PORT] = 0x0,
|
|
[OFFSET_SLAVE_ADDR] = 0x4,
|
|
[OFFSET_INTR_MASK] = 0x8,
|
|
[OFFSET_INTR_STAT] = 0xc,
|
|
[OFFSET_CONTROL] = 0x10,
|
|
[OFFSET_TRANSFER_LEN] = 0x14,
|
|
[OFFSET_TRANSAC_LEN] = 0x18,
|
|
[OFFSET_DELAY_LEN] = 0x1c,
|
|
[OFFSET_TIMING] = 0x20,
|
|
[OFFSET_START] = 0x24,
|
|
[OFFSET_EXT_CONF] = 0x28,
|
|
[OFFSET_FIFO_STAT] = 0x30,
|
|
[OFFSET_FIFO_THRESH] = 0x34,
|
|
[OFFSET_FIFO_ADDR_CLR] = 0x38,
|
|
[OFFSET_IO_CONFIG] = 0x40,
|
|
[OFFSET_RSV_DEBUG] = 0x44,
|
|
[OFFSET_HS] = 0x48,
|
|
[OFFSET_SOFTRESET] = 0x50,
|
|
[OFFSET_DCM_EN] = 0x54,
|
|
[OFFSET_PATH_DIR] = 0x60,
|
|
[OFFSET_DEBUGSTAT] = 0x64,
|
|
[OFFSET_DEBUGCTRL] = 0x68,
|
|
[OFFSET_TRANSFER_LEN_AUX] = 0x6c,
|
|
[OFFSET_CLOCK_DIV] = 0x70,
|
|
};
|
|
|
|
static const u16 mt_i2c_regs_v2[] = {
|
|
[OFFSET_DATA_PORT] = 0x0,
|
|
[OFFSET_SLAVE_ADDR] = 0x4,
|
|
[OFFSET_INTR_MASK] = 0x8,
|
|
[OFFSET_INTR_STAT] = 0xc,
|
|
[OFFSET_CONTROL] = 0x10,
|
|
[OFFSET_TRANSFER_LEN] = 0x14,
|
|
[OFFSET_TRANSAC_LEN] = 0x18,
|
|
[OFFSET_DELAY_LEN] = 0x1c,
|
|
[OFFSET_TIMING] = 0x20,
|
|
[OFFSET_START] = 0x24,
|
|
[OFFSET_EXT_CONF] = 0x28,
|
|
[OFFSET_LTIMING] = 0x2c,
|
|
[OFFSET_HS] = 0x30,
|
|
[OFFSET_IO_CONFIG] = 0x34,
|
|
[OFFSET_FIFO_ADDR_CLR] = 0x38,
|
|
[OFFSET_TRANSFER_LEN_AUX] = 0x44,
|
|
[OFFSET_CLOCK_DIV] = 0x48,
|
|
[OFFSET_SOFTRESET] = 0x50,
|
|
[OFFSET_DEBUGSTAT] = 0xe0,
|
|
[OFFSET_DEBUGCTRL] = 0xe8,
|
|
[OFFSET_FIFO_STAT] = 0xf4,
|
|
[OFFSET_FIFO_THRESH] = 0xf8,
|
|
[OFFSET_DCM_EN] = 0xf88,
|
|
};
|
|
|
|
struct mtk_i2c_compatible {
|
|
const struct i2c_adapter_quirks *quirks;
|
|
const u16 *regs;
|
|
unsigned char pmic_i2c: 1;
|
|
unsigned char dcm: 1;
|
|
unsigned char auto_restart: 1;
|
|
unsigned char aux_len_reg: 1;
|
|
unsigned char support_33bits: 1;
|
|
unsigned char timing_adjust: 1;
|
|
unsigned char dma_sync: 1;
|
|
unsigned char ltiming_adjust: 1;
|
|
};
|
|
|
|
struct mtk_i2c {
|
|
struct i2c_adapter adap; /* i2c host adapter */
|
|
struct device *dev;
|
|
struct completion msg_complete;
|
|
|
|
/* set in i2c probe */
|
|
void __iomem *base; /* i2c base addr */
|
|
void __iomem *pdmabase; /* dma base address*/
|
|
struct clk *clk_main; /* main clock for i2c bus */
|
|
struct clk *clk_dma; /* DMA clock for i2c via DMA */
|
|
struct clk *clk_pmic; /* PMIC clock for i2c from PMIC */
|
|
struct clk *clk_arb; /* Arbitrator clock for i2c */
|
|
bool have_pmic; /* can use i2c pins from PMIC */
|
|
bool use_push_pull; /* IO config push-pull mode */
|
|
|
|
u16 irq_stat; /* interrupt status */
|
|
unsigned int clk_src_div;
|
|
unsigned int speed_hz; /* The speed in transfer */
|
|
enum mtk_trans_op op;
|
|
u16 timing_reg;
|
|
u16 high_speed_reg;
|
|
u16 ltiming_reg;
|
|
unsigned char auto_restart;
|
|
bool ignore_restart_irq;
|
|
const struct mtk_i2c_compatible *dev_comp;
|
|
};
|
|
|
|
static const struct i2c_adapter_quirks mt6577_i2c_quirks = {
|
|
.flags = I2C_AQ_COMB_WRITE_THEN_READ,
|
|
.max_num_msgs = 1,
|
|
.max_write_len = 255,
|
|
.max_read_len = 255,
|
|
.max_comb_1st_msg_len = 255,
|
|
.max_comb_2nd_msg_len = 31,
|
|
};
|
|
|
|
static const struct i2c_adapter_quirks mt7622_i2c_quirks = {
|
|
.max_num_msgs = 255,
|
|
};
|
|
|
|
static const struct i2c_adapter_quirks mt8183_i2c_quirks = {
|
|
.flags = I2C_AQ_NO_ZERO_LEN,
|
|
};
|
|
|
|
static const struct mtk_i2c_compatible mt2712_compat = {
|
|
.regs = mt_i2c_regs_v1,
|
|
.pmic_i2c = 0,
|
|
.dcm = 1,
|
|
.auto_restart = 1,
|
|
.aux_len_reg = 1,
|
|
.support_33bits = 1,
|
|
.timing_adjust = 1,
|
|
.dma_sync = 0,
|
|
.ltiming_adjust = 0,
|
|
};
|
|
|
|
static const struct mtk_i2c_compatible mt6577_compat = {
|
|
.quirks = &mt6577_i2c_quirks,
|
|
.regs = mt_i2c_regs_v1,
|
|
.pmic_i2c = 0,
|
|
.dcm = 1,
|
|
.auto_restart = 0,
|
|
.aux_len_reg = 0,
|
|
.support_33bits = 0,
|
|
.timing_adjust = 0,
|
|
.dma_sync = 0,
|
|
.ltiming_adjust = 0,
|
|
};
|
|
|
|
static const struct mtk_i2c_compatible mt6589_compat = {
|
|
.quirks = &mt6577_i2c_quirks,
|
|
.regs = mt_i2c_regs_v1,
|
|
.pmic_i2c = 1,
|
|
.dcm = 0,
|
|
.auto_restart = 0,
|
|
.aux_len_reg = 0,
|
|
.support_33bits = 0,
|
|
.timing_adjust = 0,
|
|
.dma_sync = 0,
|
|
.ltiming_adjust = 0,
|
|
};
|
|
|
|
static const struct mtk_i2c_compatible mt7622_compat = {
|
|
.quirks = &mt7622_i2c_quirks,
|
|
.regs = mt_i2c_regs_v1,
|
|
.pmic_i2c = 0,
|
|
.dcm = 1,
|
|
.auto_restart = 1,
|
|
.aux_len_reg = 1,
|
|
.support_33bits = 0,
|
|
.timing_adjust = 0,
|
|
.dma_sync = 0,
|
|
.ltiming_adjust = 0,
|
|
};
|
|
|
|
static const struct mtk_i2c_compatible mt8173_compat = {
|
|
.regs = mt_i2c_regs_v1,
|
|
.pmic_i2c = 0,
|
|
.dcm = 1,
|
|
.auto_restart = 1,
|
|
.aux_len_reg = 1,
|
|
.support_33bits = 1,
|
|
.timing_adjust = 0,
|
|
.dma_sync = 0,
|
|
.ltiming_adjust = 0,
|
|
};
|
|
|
|
static const struct mtk_i2c_compatible mt8183_compat = {
|
|
.quirks = &mt8183_i2c_quirks,
|
|
.regs = mt_i2c_regs_v2,
|
|
.pmic_i2c = 0,
|
|
.dcm = 0,
|
|
.auto_restart = 1,
|
|
.aux_len_reg = 1,
|
|
.support_33bits = 1,
|
|
.timing_adjust = 1,
|
|
.dma_sync = 1,
|
|
.ltiming_adjust = 1,
|
|
};
|
|
|
|
static const struct of_device_id mtk_i2c_of_match[] = {
|
|
{ .compatible = "mediatek,mt2712-i2c", .data = &mt2712_compat },
|
|
{ .compatible = "mediatek,mt6577-i2c", .data = &mt6577_compat },
|
|
{ .compatible = "mediatek,mt6589-i2c", .data = &mt6589_compat },
|
|
{ .compatible = "mediatek,mt7622-i2c", .data = &mt7622_compat },
|
|
{ .compatible = "mediatek,mt8173-i2c", .data = &mt8173_compat },
|
|
{ .compatible = "mediatek,mt8183-i2c", .data = &mt8183_compat },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, mtk_i2c_of_match);
|
|
|
|
static u16 mtk_i2c_readw(struct mtk_i2c *i2c, enum I2C_REGS_OFFSET reg)
|
|
{
|
|
return readw(i2c->base + i2c->dev_comp->regs[reg]);
|
|
}
|
|
|
|
static void mtk_i2c_writew(struct mtk_i2c *i2c, u16 val,
|
|
enum I2C_REGS_OFFSET reg)
|
|
{
|
|
writew(val, i2c->base + i2c->dev_comp->regs[reg]);
|
|
}
|
|
|
|
static int mtk_i2c_clock_enable(struct mtk_i2c *i2c)
|
|
{
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(i2c->clk_dma);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_prepare_enable(i2c->clk_main);
|
|
if (ret)
|
|
goto err_main;
|
|
|
|
if (i2c->have_pmic) {
|
|
ret = clk_prepare_enable(i2c->clk_pmic);
|
|
if (ret)
|
|
goto err_pmic;
|
|
}
|
|
|
|
if (i2c->clk_arb) {
|
|
ret = clk_prepare_enable(i2c->clk_arb);
|
|
if (ret)
|
|
goto err_arb;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_arb:
|
|
if (i2c->have_pmic)
|
|
clk_disable_unprepare(i2c->clk_pmic);
|
|
err_pmic:
|
|
clk_disable_unprepare(i2c->clk_main);
|
|
err_main:
|
|
clk_disable_unprepare(i2c->clk_dma);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void mtk_i2c_clock_disable(struct mtk_i2c *i2c)
|
|
{
|
|
if (i2c->clk_arb)
|
|
clk_disable_unprepare(i2c->clk_arb);
|
|
|
|
if (i2c->have_pmic)
|
|
clk_disable_unprepare(i2c->clk_pmic);
|
|
|
|
clk_disable_unprepare(i2c->clk_main);
|
|
clk_disable_unprepare(i2c->clk_dma);
|
|
}
|
|
|
|
static void mtk_i2c_init_hw(struct mtk_i2c *i2c)
|
|
{
|
|
u16 control_reg;
|
|
|
|
mtk_i2c_writew(i2c, I2C_SOFT_RST, OFFSET_SOFTRESET);
|
|
|
|
/* Set ioconfig */
|
|
if (i2c->use_push_pull)
|
|
mtk_i2c_writew(i2c, I2C_IO_CONFIG_PUSH_PULL, OFFSET_IO_CONFIG);
|
|
else
|
|
mtk_i2c_writew(i2c, I2C_IO_CONFIG_OPEN_DRAIN, OFFSET_IO_CONFIG);
|
|
|
|
if (i2c->dev_comp->dcm)
|
|
mtk_i2c_writew(i2c, I2C_DCM_DISABLE, OFFSET_DCM_EN);
|
|
|
|
if (i2c->dev_comp->timing_adjust)
|
|
mtk_i2c_writew(i2c, I2C_DEFAULT_CLK_DIV - 1, OFFSET_CLOCK_DIV);
|
|
|
|
mtk_i2c_writew(i2c, i2c->timing_reg, OFFSET_TIMING);
|
|
mtk_i2c_writew(i2c, i2c->high_speed_reg, OFFSET_HS);
|
|
if (i2c->dev_comp->ltiming_adjust)
|
|
mtk_i2c_writew(i2c, i2c->ltiming_reg, OFFSET_LTIMING);
|
|
|
|
/* If use i2c pin from PMIC mt6397 side, need set PATH_DIR first */
|
|
if (i2c->have_pmic)
|
|
mtk_i2c_writew(i2c, I2C_CONTROL_WRAPPER, OFFSET_PATH_DIR);
|
|
|
|
control_reg = I2C_CONTROL_ACKERR_DET_EN |
|
|
I2C_CONTROL_CLK_EXT_EN | I2C_CONTROL_DMA_EN;
|
|
if (i2c->dev_comp->dma_sync)
|
|
control_reg |= I2C_CONTROL_DMAACK_EN | I2C_CONTROL_ASYNC_MODE;
|
|
|
|
mtk_i2c_writew(i2c, control_reg, OFFSET_CONTROL);
|
|
mtk_i2c_writew(i2c, I2C_DELAY_LEN, OFFSET_DELAY_LEN);
|
|
|
|
writel(I2C_DMA_HARD_RST, i2c->pdmabase + OFFSET_RST);
|
|
udelay(50);
|
|
writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_RST);
|
|
}
|
|
|
|
/*
|
|
* Calculate i2c port speed
|
|
*
|
|
* Hardware design:
|
|
* i2c_bus_freq = parent_clk / (clock_div * 2 * sample_cnt * step_cnt)
|
|
* clock_div: fixed in hardware, but may be various in different SoCs
|
|
*
|
|
* The calculation want to pick the highest bus frequency that is still
|
|
* less than or equal to i2c->speed_hz. The calculation try to get
|
|
* sample_cnt and step_cn
|
|
*/
|
|
static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
|
|
unsigned int target_speed,
|
|
unsigned int *timing_step_cnt,
|
|
unsigned int *timing_sample_cnt)
|
|
{
|
|
unsigned int step_cnt;
|
|
unsigned int sample_cnt;
|
|
unsigned int max_step_cnt;
|
|
unsigned int base_sample_cnt = MAX_SAMPLE_CNT_DIV;
|
|
unsigned int base_step_cnt;
|
|
unsigned int opt_div;
|
|
unsigned int best_mul;
|
|
unsigned int cnt_mul;
|
|
|
|
if (target_speed > MAX_HS_MODE_SPEED)
|
|
target_speed = MAX_HS_MODE_SPEED;
|
|
|
|
if (target_speed > MAX_FS_MODE_SPEED)
|
|
max_step_cnt = MAX_HS_STEP_CNT_DIV;
|
|
else
|
|
max_step_cnt = MAX_STEP_CNT_DIV;
|
|
|
|
base_step_cnt = max_step_cnt;
|
|
/* Find the best combination */
|
|
opt_div = DIV_ROUND_UP(clk_src >> 1, target_speed);
|
|
best_mul = MAX_SAMPLE_CNT_DIV * max_step_cnt;
|
|
|
|
/* Search for the best pair (sample_cnt, step_cnt) with
|
|
* 0 < sample_cnt < MAX_SAMPLE_CNT_DIV
|
|
* 0 < step_cnt < max_step_cnt
|
|
* sample_cnt * step_cnt >= opt_div
|
|
* optimizing for sample_cnt * step_cnt being minimal
|
|
*/
|
|
for (sample_cnt = 1; sample_cnt <= MAX_SAMPLE_CNT_DIV; sample_cnt++) {
|
|
step_cnt = DIV_ROUND_UP(opt_div, sample_cnt);
|
|
cnt_mul = step_cnt * sample_cnt;
|
|
if (step_cnt > max_step_cnt)
|
|
continue;
|
|
|
|
if (cnt_mul < best_mul) {
|
|
best_mul = cnt_mul;
|
|
base_sample_cnt = sample_cnt;
|
|
base_step_cnt = step_cnt;
|
|
if (best_mul == opt_div)
|
|
break;
|
|
}
|
|
}
|
|
|
|
sample_cnt = base_sample_cnt;
|
|
step_cnt = base_step_cnt;
|
|
|
|
if ((clk_src / (2 * sample_cnt * step_cnt)) > target_speed) {
|
|
/* In this case, hardware can't support such
|
|
* low i2c_bus_freq
|
|
*/
|
|
dev_dbg(i2c->dev, "Unsupported speed (%uhz)\n", target_speed);
|
|
return -EINVAL;
|
|
}
|
|
|
|
*timing_step_cnt = step_cnt - 1;
|
|
*timing_sample_cnt = sample_cnt - 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
|
|
{
|
|
unsigned int clk_src;
|
|
unsigned int step_cnt;
|
|
unsigned int sample_cnt;
|
|
unsigned int l_step_cnt;
|
|
unsigned int l_sample_cnt;
|
|
unsigned int target_speed;
|
|
int ret;
|
|
|
|
clk_src = parent_clk / i2c->clk_src_div;
|
|
target_speed = i2c->speed_hz;
|
|
|
|
if (target_speed > MAX_FS_MODE_SPEED) {
|
|
/* Set master code speed register */
|
|
ret = mtk_i2c_calculate_speed(i2c, clk_src, MAX_FS_MODE_SPEED,
|
|
&l_step_cnt, &l_sample_cnt);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
i2c->timing_reg = (l_sample_cnt << 8) | l_step_cnt;
|
|
|
|
/* Set the high speed mode register */
|
|
ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
|
|
&step_cnt, &sample_cnt);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
i2c->high_speed_reg = I2C_TIME_DEFAULT_VALUE |
|
|
(sample_cnt << 12) | (step_cnt << 8);
|
|
|
|
if (i2c->dev_comp->ltiming_adjust)
|
|
i2c->ltiming_reg = (l_sample_cnt << 6) | l_step_cnt |
|
|
(sample_cnt << 12) | (step_cnt << 9);
|
|
} else {
|
|
ret = mtk_i2c_calculate_speed(i2c, clk_src, target_speed,
|
|
&step_cnt, &sample_cnt);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
i2c->timing_reg = (sample_cnt << 8) | step_cnt;
|
|
|
|
/* Disable the high speed transaction */
|
|
i2c->high_speed_reg = I2C_TIME_CLR_VALUE;
|
|
|
|
if (i2c->dev_comp->ltiming_adjust)
|
|
i2c->ltiming_reg = (sample_cnt << 6) | step_cnt;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline u32 mtk_i2c_set_4g_mode(dma_addr_t addr)
|
|
{
|
|
return (addr & BIT_ULL(32)) ? I2C_DMA_4G_MODE : I2C_DMA_CLR_FLAG;
|
|
}
|
|
|
|
static int mtk_i2c_do_transfer(struct mtk_i2c *i2c, struct i2c_msg *msgs,
|
|
int num, int left_num)
|
|
{
|
|
u16 addr_reg;
|
|
u16 start_reg;
|
|
u16 control_reg;
|
|
u16 restart_flag = 0;
|
|
u32 reg_4g_mode;
|
|
u8 *dma_rd_buf = NULL;
|
|
u8 *dma_wr_buf = NULL;
|
|
dma_addr_t rpaddr = 0;
|
|
dma_addr_t wpaddr = 0;
|
|
int ret;
|
|
|
|
i2c->irq_stat = 0;
|
|
|
|
if (i2c->auto_restart)
|
|
restart_flag = I2C_RS_TRANSFER;
|
|
|
|
reinit_completion(&i2c->msg_complete);
|
|
|
|
control_reg = mtk_i2c_readw(i2c, OFFSET_CONTROL) &
|
|
~(I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS);
|
|
if ((i2c->speed_hz > MAX_FS_MODE_SPEED) || (left_num >= 1))
|
|
control_reg |= I2C_CONTROL_RS;
|
|
|
|
if (i2c->op == I2C_MASTER_WRRD)
|
|
control_reg |= I2C_CONTROL_DIR_CHANGE | I2C_CONTROL_RS;
|
|
|
|
mtk_i2c_writew(i2c, control_reg, OFFSET_CONTROL);
|
|
|
|
/* set start condition */
|
|
if (i2c->speed_hz <= I2C_DEFAULT_SPEED)
|
|
mtk_i2c_writew(i2c, I2C_ST_START_CON, OFFSET_EXT_CONF);
|
|
else
|
|
mtk_i2c_writew(i2c, I2C_FS_START_CON, OFFSET_EXT_CONF);
|
|
|
|
addr_reg = i2c_8bit_addr_from_msg(msgs);
|
|
mtk_i2c_writew(i2c, addr_reg, OFFSET_SLAVE_ADDR);
|
|
|
|
/* Clear interrupt status */
|
|
mtk_i2c_writew(i2c, restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
|
|
I2C_ARB_LOST | I2C_TRANSAC_COMP, OFFSET_INTR_STAT);
|
|
|
|
mtk_i2c_writew(i2c, I2C_FIFO_ADDR_CLR, OFFSET_FIFO_ADDR_CLR);
|
|
|
|
/* Enable interrupt */
|
|
mtk_i2c_writew(i2c, restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
|
|
I2C_ARB_LOST | I2C_TRANSAC_COMP, OFFSET_INTR_MASK);
|
|
|
|
/* Set transfer and transaction len */
|
|
if (i2c->op == I2C_MASTER_WRRD) {
|
|
if (i2c->dev_comp->aux_len_reg) {
|
|
mtk_i2c_writew(i2c, msgs->len, OFFSET_TRANSFER_LEN);
|
|
mtk_i2c_writew(i2c, (msgs + 1)->len,
|
|
OFFSET_TRANSFER_LEN_AUX);
|
|
} else {
|
|
mtk_i2c_writew(i2c, msgs->len | ((msgs + 1)->len) << 8,
|
|
OFFSET_TRANSFER_LEN);
|
|
}
|
|
mtk_i2c_writew(i2c, I2C_WRRD_TRANAC_VALUE, OFFSET_TRANSAC_LEN);
|
|
} else {
|
|
mtk_i2c_writew(i2c, msgs->len, OFFSET_TRANSFER_LEN);
|
|
mtk_i2c_writew(i2c, num, OFFSET_TRANSAC_LEN);
|
|
}
|
|
|
|
/* Prepare buffer data to start transfer */
|
|
if (i2c->op == I2C_MASTER_RD) {
|
|
writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
|
|
writel(I2C_DMA_CON_RX, i2c->pdmabase + OFFSET_CON);
|
|
|
|
dma_rd_buf = i2c_get_dma_safe_msg_buf(msgs, 1);
|
|
if (!dma_rd_buf)
|
|
return -ENOMEM;
|
|
|
|
rpaddr = dma_map_single(i2c->dev, dma_rd_buf,
|
|
msgs->len, DMA_FROM_DEVICE);
|
|
if (dma_mapping_error(i2c->dev, rpaddr)) {
|
|
i2c_put_dma_safe_msg_buf(dma_rd_buf, msgs, false);
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (i2c->dev_comp->support_33bits) {
|
|
reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr);
|
|
writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE);
|
|
}
|
|
|
|
writel((u32)rpaddr, i2c->pdmabase + OFFSET_RX_MEM_ADDR);
|
|
writel(msgs->len, i2c->pdmabase + OFFSET_RX_LEN);
|
|
} else if (i2c->op == I2C_MASTER_WR) {
|
|
writel(I2C_DMA_INT_FLAG_NONE, i2c->pdmabase + OFFSET_INT_FLAG);
|
|
writel(I2C_DMA_CON_TX, i2c->pdmabase + OFFSET_CON);
|
|
|
|
dma_wr_buf = i2c_get_dma_safe_msg_buf(msgs, 1);
|
|
if (!dma_wr_buf)
|
|
return -ENOMEM;
|
|
|
|
wpaddr = dma_map_single(i2c->dev, dma_wr_buf,
|
|
msgs->len, DMA_TO_DEVICE);
|
|
if (dma_mapping_error(i2c->dev, wpaddr)) {
|
|
i2c_put_dma_safe_msg_buf(dma_wr_buf, msgs, false);
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (i2c->dev_comp->support_33bits) {
|
|
reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr);
|
|
writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
|
|
}
|
|
|
|
writel((u32)wpaddr, i2c->pdmabase + OFFSET_TX_MEM_ADDR);
|
|
writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN);
|
|
} else {
|
|
writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_INT_FLAG);
|
|
writel(I2C_DMA_CLR_FLAG, i2c->pdmabase + OFFSET_CON);
|
|
|
|
dma_wr_buf = i2c_get_dma_safe_msg_buf(msgs, 1);
|
|
if (!dma_wr_buf)
|
|
return -ENOMEM;
|
|
|
|
wpaddr = dma_map_single(i2c->dev, dma_wr_buf,
|
|
msgs->len, DMA_TO_DEVICE);
|
|
if (dma_mapping_error(i2c->dev, wpaddr)) {
|
|
i2c_put_dma_safe_msg_buf(dma_wr_buf, msgs, false);
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dma_rd_buf = i2c_get_dma_safe_msg_buf((msgs + 1), 1);
|
|
if (!dma_rd_buf) {
|
|
dma_unmap_single(i2c->dev, wpaddr,
|
|
msgs->len, DMA_TO_DEVICE);
|
|
|
|
i2c_put_dma_safe_msg_buf(dma_wr_buf, msgs, false);
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
rpaddr = dma_map_single(i2c->dev, dma_rd_buf,
|
|
(msgs + 1)->len,
|
|
DMA_FROM_DEVICE);
|
|
if (dma_mapping_error(i2c->dev, rpaddr)) {
|
|
dma_unmap_single(i2c->dev, wpaddr,
|
|
msgs->len, DMA_TO_DEVICE);
|
|
|
|
i2c_put_dma_safe_msg_buf(dma_wr_buf, msgs, false);
|
|
i2c_put_dma_safe_msg_buf(dma_rd_buf, (msgs + 1), false);
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (i2c->dev_comp->support_33bits) {
|
|
reg_4g_mode = mtk_i2c_set_4g_mode(wpaddr);
|
|
writel(reg_4g_mode, i2c->pdmabase + OFFSET_TX_4G_MODE);
|
|
|
|
reg_4g_mode = mtk_i2c_set_4g_mode(rpaddr);
|
|
writel(reg_4g_mode, i2c->pdmabase + OFFSET_RX_4G_MODE);
|
|
}
|
|
|
|
writel((u32)wpaddr, i2c->pdmabase + OFFSET_TX_MEM_ADDR);
|
|
writel((u32)rpaddr, i2c->pdmabase + OFFSET_RX_MEM_ADDR);
|
|
writel(msgs->len, i2c->pdmabase + OFFSET_TX_LEN);
|
|
writel((msgs + 1)->len, i2c->pdmabase + OFFSET_RX_LEN);
|
|
}
|
|
|
|
writel(I2C_DMA_START_EN, i2c->pdmabase + OFFSET_EN);
|
|
|
|
if (!i2c->auto_restart) {
|
|
start_reg = I2C_TRANSAC_START;
|
|
} else {
|
|
start_reg = I2C_TRANSAC_START | I2C_RS_MUL_TRIG;
|
|
if (left_num >= 1)
|
|
start_reg |= I2C_RS_MUL_CNFG;
|
|
}
|
|
mtk_i2c_writew(i2c, start_reg, OFFSET_START);
|
|
|
|
ret = wait_for_completion_timeout(&i2c->msg_complete,
|
|
i2c->adap.timeout);
|
|
|
|
/* Clear interrupt mask */
|
|
mtk_i2c_writew(i2c, ~(restart_flag | I2C_HS_NACKERR | I2C_ACKERR |
|
|
I2C_ARB_LOST | I2C_TRANSAC_COMP), OFFSET_INTR_MASK);
|
|
|
|
if (i2c->op == I2C_MASTER_WR) {
|
|
dma_unmap_single(i2c->dev, wpaddr,
|
|
msgs->len, DMA_TO_DEVICE);
|
|
|
|
i2c_put_dma_safe_msg_buf(dma_wr_buf, msgs, true);
|
|
} else if (i2c->op == I2C_MASTER_RD) {
|
|
dma_unmap_single(i2c->dev, rpaddr,
|
|
msgs->len, DMA_FROM_DEVICE);
|
|
|
|
i2c_put_dma_safe_msg_buf(dma_rd_buf, msgs, true);
|
|
} else {
|
|
dma_unmap_single(i2c->dev, wpaddr, msgs->len,
|
|
DMA_TO_DEVICE);
|
|
dma_unmap_single(i2c->dev, rpaddr, (msgs + 1)->len,
|
|
DMA_FROM_DEVICE);
|
|
|
|
i2c_put_dma_safe_msg_buf(dma_wr_buf, msgs, true);
|
|
i2c_put_dma_safe_msg_buf(dma_rd_buf, (msgs + 1), true);
|
|
}
|
|
|
|
if (ret == 0) {
|
|
dev_dbg(i2c->dev, "addr: %x, transfer timeout\n", msgs->addr);
|
|
mtk_i2c_init_hw(i2c);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
if (i2c->irq_stat & (I2C_HS_NACKERR | I2C_ACKERR)) {
|
|
dev_dbg(i2c->dev, "addr: %x, transfer ACK error\n", msgs->addr);
|
|
mtk_i2c_init_hw(i2c);
|
|
return -ENXIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_i2c_transfer(struct i2c_adapter *adap,
|
|
struct i2c_msg msgs[], int num)
|
|
{
|
|
int ret;
|
|
int left_num = num;
|
|
struct mtk_i2c *i2c = i2c_get_adapdata(adap);
|
|
|
|
ret = mtk_i2c_clock_enable(i2c);
|
|
if (ret)
|
|
return ret;
|
|
|
|
i2c->auto_restart = i2c->dev_comp->auto_restart;
|
|
|
|
/* checking if we can skip restart and optimize using WRRD mode */
|
|
if (i2c->auto_restart && num == 2) {
|
|
if (!(msgs[0].flags & I2C_M_RD) && (msgs[1].flags & I2C_M_RD) &&
|
|
msgs[0].addr == msgs[1].addr) {
|
|
i2c->auto_restart = 0;
|
|
}
|
|
}
|
|
|
|
if (i2c->auto_restart && num >= 2 && i2c->speed_hz > MAX_FS_MODE_SPEED)
|
|
/* ignore the first restart irq after the master code,
|
|
* otherwise the first transfer will be discarded.
|
|
*/
|
|
i2c->ignore_restart_irq = true;
|
|
else
|
|
i2c->ignore_restart_irq = false;
|
|
|
|
while (left_num--) {
|
|
if (!msgs->buf) {
|
|
dev_dbg(i2c->dev, "data buffer is NULL.\n");
|
|
ret = -EINVAL;
|
|
goto err_exit;
|
|
}
|
|
|
|
if (msgs->flags & I2C_M_RD)
|
|
i2c->op = I2C_MASTER_RD;
|
|
else
|
|
i2c->op = I2C_MASTER_WR;
|
|
|
|
if (!i2c->auto_restart) {
|
|
if (num > 1) {
|
|
/* combined two messages into one transaction */
|
|
i2c->op = I2C_MASTER_WRRD;
|
|
left_num--;
|
|
}
|
|
}
|
|
|
|
/* always use DMA mode. */
|
|
ret = mtk_i2c_do_transfer(i2c, msgs, num, left_num);
|
|
if (ret < 0)
|
|
goto err_exit;
|
|
|
|
msgs++;
|
|
}
|
|
/* the return value is number of executed messages */
|
|
ret = num;
|
|
|
|
err_exit:
|
|
mtk_i2c_clock_disable(i2c);
|
|
return ret;
|
|
}
|
|
|
|
static irqreturn_t mtk_i2c_irq(int irqno, void *dev_id)
|
|
{
|
|
struct mtk_i2c *i2c = dev_id;
|
|
u16 restart_flag = 0;
|
|
u16 intr_stat;
|
|
|
|
if (i2c->auto_restart)
|
|
restart_flag = I2C_RS_TRANSFER;
|
|
|
|
intr_stat = mtk_i2c_readw(i2c, OFFSET_INTR_STAT);
|
|
mtk_i2c_writew(i2c, intr_stat, OFFSET_INTR_STAT);
|
|
|
|
/*
|
|
* when occurs ack error, i2c controller generate two interrupts
|
|
* first is the ack error interrupt, then the complete interrupt
|
|
* i2c->irq_stat need keep the two interrupt value.
|
|
*/
|
|
i2c->irq_stat |= intr_stat;
|
|
|
|
if (i2c->ignore_restart_irq && (i2c->irq_stat & restart_flag)) {
|
|
i2c->ignore_restart_irq = false;
|
|
i2c->irq_stat = 0;
|
|
mtk_i2c_writew(i2c, I2C_RS_MUL_CNFG | I2C_RS_MUL_TRIG |
|
|
I2C_TRANSAC_START, OFFSET_START);
|
|
} else {
|
|
if (i2c->irq_stat & (I2C_TRANSAC_COMP | restart_flag))
|
|
complete(&i2c->msg_complete);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static u32 mtk_i2c_functionality(struct i2c_adapter *adap)
|
|
{
|
|
if (i2c_check_quirks(adap, I2C_AQ_NO_ZERO_LEN))
|
|
return I2C_FUNC_I2C |
|
|
(I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
|
|
else
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static const struct i2c_algorithm mtk_i2c_algorithm = {
|
|
.master_xfer = mtk_i2c_transfer,
|
|
.functionality = mtk_i2c_functionality,
|
|
};
|
|
|
|
static int mtk_i2c_parse_dt(struct device_node *np, struct mtk_i2c *i2c)
|
|
{
|
|
int ret;
|
|
|
|
ret = of_property_read_u32(np, "clock-frequency", &i2c->speed_hz);
|
|
if (ret < 0)
|
|
i2c->speed_hz = I2C_DEFAULT_SPEED;
|
|
|
|
ret = of_property_read_u32(np, "clock-div", &i2c->clk_src_div);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (i2c->clk_src_div == 0)
|
|
return -EINVAL;
|
|
|
|
i2c->have_pmic = of_property_read_bool(np, "mediatek,have-pmic");
|
|
i2c->use_push_pull =
|
|
of_property_read_bool(np, "mediatek,use-push-pull");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_i2c_probe(struct platform_device *pdev)
|
|
{
|
|
int ret = 0;
|
|
struct mtk_i2c *i2c;
|
|
struct clk *clk;
|
|
struct resource *res;
|
|
int irq;
|
|
|
|
i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
|
|
if (!i2c)
|
|
return -ENOMEM;
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
i2c->base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(i2c->base))
|
|
return PTR_ERR(i2c->base);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
i2c->pdmabase = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(i2c->pdmabase))
|
|
return PTR_ERR(i2c->pdmabase);
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq <= 0)
|
|
return irq;
|
|
|
|
init_completion(&i2c->msg_complete);
|
|
|
|
i2c->dev_comp = of_device_get_match_data(&pdev->dev);
|
|
i2c->adap.dev.of_node = pdev->dev.of_node;
|
|
i2c->dev = &pdev->dev;
|
|
i2c->adap.dev.parent = &pdev->dev;
|
|
i2c->adap.owner = THIS_MODULE;
|
|
i2c->adap.algo = &mtk_i2c_algorithm;
|
|
i2c->adap.quirks = i2c->dev_comp->quirks;
|
|
i2c->adap.timeout = 2 * HZ;
|
|
i2c->adap.retries = 1;
|
|
|
|
ret = mtk_i2c_parse_dt(pdev->dev.of_node, i2c);
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
if (i2c->dev_comp->timing_adjust)
|
|
i2c->clk_src_div *= I2C_DEFAULT_CLK_DIV;
|
|
|
|
if (i2c->have_pmic && !i2c->dev_comp->pmic_i2c)
|
|
return -EINVAL;
|
|
|
|
i2c->clk_main = devm_clk_get(&pdev->dev, "main");
|
|
if (IS_ERR(i2c->clk_main)) {
|
|
dev_err(&pdev->dev, "cannot get main clock\n");
|
|
return PTR_ERR(i2c->clk_main);
|
|
}
|
|
|
|
i2c->clk_dma = devm_clk_get(&pdev->dev, "dma");
|
|
if (IS_ERR(i2c->clk_dma)) {
|
|
dev_err(&pdev->dev, "cannot get dma clock\n");
|
|
return PTR_ERR(i2c->clk_dma);
|
|
}
|
|
|
|
i2c->clk_arb = devm_clk_get(&pdev->dev, "arb");
|
|
if (IS_ERR(i2c->clk_arb))
|
|
i2c->clk_arb = NULL;
|
|
|
|
clk = i2c->clk_main;
|
|
if (i2c->have_pmic) {
|
|
i2c->clk_pmic = devm_clk_get(&pdev->dev, "pmic");
|
|
if (IS_ERR(i2c->clk_pmic)) {
|
|
dev_err(&pdev->dev, "cannot get pmic clock\n");
|
|
return PTR_ERR(i2c->clk_pmic);
|
|
}
|
|
clk = i2c->clk_pmic;
|
|
}
|
|
|
|
strlcpy(i2c->adap.name, I2C_DRV_NAME, sizeof(i2c->adap.name));
|
|
|
|
ret = mtk_i2c_set_speed(i2c, clk_get_rate(clk));
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "Failed to set the speed.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (i2c->dev_comp->support_33bits) {
|
|
ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(33));
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "dma_set_mask return error.\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
ret = mtk_i2c_clock_enable(i2c);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "clock enable failed!\n");
|
|
return ret;
|
|
}
|
|
mtk_i2c_init_hw(i2c);
|
|
mtk_i2c_clock_disable(i2c);
|
|
|
|
ret = devm_request_irq(&pdev->dev, irq, mtk_i2c_irq,
|
|
IRQF_TRIGGER_NONE, I2C_DRV_NAME, i2c);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev,
|
|
"Request I2C IRQ %d fail\n", irq);
|
|
return ret;
|
|
}
|
|
|
|
i2c_set_adapdata(&i2c->adap, i2c);
|
|
ret = i2c_add_adapter(&i2c->adap);
|
|
if (ret)
|
|
return ret;
|
|
|
|
platform_set_drvdata(pdev, i2c);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mtk_i2c_remove(struct platform_device *pdev)
|
|
{
|
|
struct mtk_i2c *i2c = platform_get_drvdata(pdev);
|
|
|
|
i2c_del_adapter(&i2c->adap);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int mtk_i2c_resume(struct device *dev)
|
|
{
|
|
int ret;
|
|
struct mtk_i2c *i2c = dev_get_drvdata(dev);
|
|
|
|
ret = mtk_i2c_clock_enable(i2c);
|
|
if (ret) {
|
|
dev_err(dev, "clock enable failed!\n");
|
|
return ret;
|
|
}
|
|
|
|
mtk_i2c_init_hw(i2c);
|
|
|
|
mtk_i2c_clock_disable(i2c);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops mtk_i2c_pm = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(NULL, mtk_i2c_resume)
|
|
};
|
|
|
|
static struct platform_driver mtk_i2c_driver = {
|
|
.probe = mtk_i2c_probe,
|
|
.remove = mtk_i2c_remove,
|
|
.driver = {
|
|
.name = I2C_DRV_NAME,
|
|
.pm = &mtk_i2c_pm,
|
|
.of_match_table = of_match_ptr(mtk_i2c_of_match),
|
|
},
|
|
};
|
|
|
|
module_platform_driver(mtk_i2c_driver);
|
|
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("MediaTek I2C Bus Driver");
|
|
MODULE_AUTHOR("Xudong Chen <xudong.chen@mediatek.com>");
|