mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-28 03:29:47 +07:00
eb3fcf007f
Move various interrupt controller bindings into the interrupt-controller/ directory. Signed-off-by: Rob Herring <robh@kernel.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: linux-mediatek@lists.infradead.org
61 lines
2.1 KiB
Plaintext
61 lines
2.1 KiB
Plaintext
* Marvell MMP Interrupt controller
|
|
|
|
Required properties:
|
|
- compatible : Should be "mrvl,mmp-intc", "mrvl,mmp2-intc" or
|
|
"mrvl,mmp2-mux-intc"
|
|
- reg : Address and length of the register set of the interrupt controller.
|
|
If the interrupt controller is intc, address and length means the range
|
|
of the whold interrupt controller. If the interrupt controller is mux-intc,
|
|
address and length means one register. Since address of mux-intc is in the
|
|
range of intc. mux-intc is secondary interrupt controller.
|
|
- reg-names : Name of the register set of the interrupt controller. It's
|
|
only required in mux-intc interrupt controller.
|
|
- interrupts : Should be the port interrupt shared by mux interrupts. It's
|
|
only required in mux-intc interrupt controller.
|
|
- interrupt-controller : Identifies the node as an interrupt controller.
|
|
- #interrupt-cells : Specifies the number of cells needed to encode an
|
|
interrupt source.
|
|
- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt
|
|
controller.
|
|
- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge
|
|
detection first.
|
|
|
|
Example:
|
|
intc: interrupt-controller@d4282000 {
|
|
compatible = "mrvl,mmp2-intc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0xd4282000 0x1000>;
|
|
mrvl,intc-nr-irqs = <64>;
|
|
};
|
|
|
|
intcmux4@d4282150 {
|
|
compatible = "mrvl,mmp2-mux-intc";
|
|
interrupts = <4>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x150 0x4>, <0x168 0x4>;
|
|
reg-names = "mux status", "mux mask";
|
|
mrvl,intc-nr-irqs = <2>;
|
|
};
|
|
|
|
* Marvell Orion Interrupt controller
|
|
|
|
Required properties
|
|
- compatible : Should be "marvell,orion-intc".
|
|
- #interrupt-cells: Specifies the number of cells needed to encode an
|
|
interrupt source. Supported value is <1>.
|
|
- interrupt-controller : Declare this node to be an interrupt controller.
|
|
- reg : Interrupt mask address. A list of 4 byte ranges, one per controller.
|
|
One entry in the list represents 32 interrupts.
|
|
|
|
Example:
|
|
|
|
intc: interrupt-controller {
|
|
compatible = "marvell,orion-intc", "marvell,intc";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0xfed20204 0x04>,
|
|
<0xfed20214 0x04>;
|
|
};
|