linux_dsm_epyc7002/drivers/net/ethernet/stmicro/stmmac/dwmac4_lib.c
Jose Abreu 021bd5e369 net: stmmac: Let TX and RX interrupts be independently enabled/disabled
By using this mechanism we can get rid of the not so nice method of
scheduling TX NAPI when the RX was scheduled. No bandwidth reduction was
seen with this change.

Changes from v1:
- Remove useless comment (Jakub)
- Do not bind the TX clean to NAPI budget (Jakub)

Signed-off-by: Jose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18 12:14:08 -08:00

240 lines
5.9 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2007-2015 STMicroelectronics Ltd
*
* Author: Alexandre Torgue <alexandre.torgue@st.com>
*/
#include <linux/io.h>
#include <linux/delay.h>
#include "common.h"
#include "dwmac4_dma.h"
#include "dwmac4.h"
int dwmac4_dma_reset(void __iomem *ioaddr)
{
u32 value = readl(ioaddr + DMA_BUS_MODE);
int limit;
/* DMA SW reset */
value |= DMA_BUS_MODE_SFT_RESET;
writel(value, ioaddr + DMA_BUS_MODE);
limit = 10;
while (limit--) {
if (!(readl(ioaddr + DMA_BUS_MODE) & DMA_BUS_MODE_SFT_RESET))
break;
mdelay(10);
}
if (limit < 0)
return -EBUSY;
return 0;
}
void dwmac4_set_rx_tail_ptr(void __iomem *ioaddr, u32 tail_ptr, u32 chan)
{
writel(tail_ptr, ioaddr + DMA_CHAN_RX_END_ADDR(chan));
}
void dwmac4_set_tx_tail_ptr(void __iomem *ioaddr, u32 tail_ptr, u32 chan)
{
writel(tail_ptr, ioaddr + DMA_CHAN_TX_END_ADDR(chan));
}
void dwmac4_dma_start_tx(void __iomem *ioaddr, u32 chan)
{
u32 value = readl(ioaddr + DMA_CHAN_TX_CONTROL(chan));
value |= DMA_CONTROL_ST;
writel(value, ioaddr + DMA_CHAN_TX_CONTROL(chan));
value = readl(ioaddr + GMAC_CONFIG);
value |= GMAC_CONFIG_TE;
writel(value, ioaddr + GMAC_CONFIG);
}
void dwmac4_dma_stop_tx(void __iomem *ioaddr, u32 chan)
{
u32 value = readl(ioaddr + DMA_CHAN_TX_CONTROL(chan));
value &= ~DMA_CONTROL_ST;
writel(value, ioaddr + DMA_CHAN_TX_CONTROL(chan));
value = readl(ioaddr + GMAC_CONFIG);
value &= ~GMAC_CONFIG_TE;
writel(value, ioaddr + GMAC_CONFIG);
}
void dwmac4_dma_start_rx(void __iomem *ioaddr, u32 chan)
{
u32 value = readl(ioaddr + DMA_CHAN_RX_CONTROL(chan));
value |= DMA_CONTROL_SR;
writel(value, ioaddr + DMA_CHAN_RX_CONTROL(chan));
value = readl(ioaddr + GMAC_CONFIG);
value |= GMAC_CONFIG_RE;
writel(value, ioaddr + GMAC_CONFIG);
}
void dwmac4_dma_stop_rx(void __iomem *ioaddr, u32 chan)
{
u32 value = readl(ioaddr + DMA_CHAN_RX_CONTROL(chan));
value &= ~DMA_CONTROL_SR;
writel(value, ioaddr + DMA_CHAN_RX_CONTROL(chan));
}
void dwmac4_set_tx_ring_len(void __iomem *ioaddr, u32 len, u32 chan)
{
writel(len, ioaddr + DMA_CHAN_TX_RING_LEN(chan));
}
void dwmac4_set_rx_ring_len(void __iomem *ioaddr, u32 len, u32 chan)
{
writel(len, ioaddr + DMA_CHAN_RX_RING_LEN(chan));
}
void dwmac4_enable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx)
{
u32 value = readl(ioaddr + DMA_CHAN_INTR_ENA(chan));
if (rx)
value |= DMA_CHAN_INTR_DEFAULT_RX;
if (tx)
value |= DMA_CHAN_INTR_DEFAULT_TX;
writel(value, ioaddr + DMA_CHAN_INTR_ENA(chan));
}
void dwmac410_enable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx)
{
u32 value = readl(ioaddr + DMA_CHAN_INTR_ENA(chan));
if (rx)
value |= DMA_CHAN_INTR_DEFAULT_RX_4_10;
if (tx)
value |= DMA_CHAN_INTR_DEFAULT_TX_4_10;
writel(value, ioaddr + DMA_CHAN_INTR_ENA(chan));
}
void dwmac4_disable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx)
{
u32 value = readl(ioaddr + DMA_CHAN_INTR_ENA(chan));
if (rx)
value &= ~DMA_CHAN_INTR_DEFAULT_RX;
if (tx)
value &= ~DMA_CHAN_INTR_DEFAULT_TX;
writel(value, ioaddr + DMA_CHAN_INTR_ENA(chan));
}
void dwmac410_disable_dma_irq(void __iomem *ioaddr, u32 chan, bool rx, bool tx)
{
u32 value = readl(ioaddr + DMA_CHAN_INTR_ENA(chan));
if (rx)
value &= ~DMA_CHAN_INTR_DEFAULT_RX_4_10;
if (tx)
value &= ~DMA_CHAN_INTR_DEFAULT_TX_4_10;
writel(value, ioaddr + DMA_CHAN_INTR_ENA(chan));
}
int dwmac4_dma_interrupt(void __iomem *ioaddr,
struct stmmac_extra_stats *x, u32 chan)
{
u32 intr_status = readl(ioaddr + DMA_CHAN_STATUS(chan));
u32 intr_en = readl(ioaddr + DMA_CHAN_INTR_ENA(chan));
int ret = 0;
/* ABNORMAL interrupts */
if (unlikely(intr_status & DMA_CHAN_STATUS_AIS)) {
if (unlikely(intr_status & DMA_CHAN_STATUS_RBU))
x->rx_buf_unav_irq++;
if (unlikely(intr_status & DMA_CHAN_STATUS_RPS))
x->rx_process_stopped_irq++;
if (unlikely(intr_status & DMA_CHAN_STATUS_RWT))
x->rx_watchdog_irq++;
if (unlikely(intr_status & DMA_CHAN_STATUS_ETI))
x->tx_early_irq++;
if (unlikely(intr_status & DMA_CHAN_STATUS_TPS)) {
x->tx_process_stopped_irq++;
ret = tx_hard_error;
}
if (unlikely(intr_status & DMA_CHAN_STATUS_FBE)) {
x->fatal_bus_error_irq++;
ret = tx_hard_error;
}
}
/* TX/RX NORMAL interrupts */
if (likely(intr_status & DMA_CHAN_STATUS_NIS)) {
x->normal_irq_n++;
if (likely(intr_status & DMA_CHAN_STATUS_RI)) {
x->rx_normal_irq_n++;
ret |= handle_rx;
}
if (likely(intr_status & (DMA_CHAN_STATUS_TI |
DMA_CHAN_STATUS_TBU))) {
x->tx_normal_irq_n++;
ret |= handle_tx;
}
if (unlikely(intr_status & DMA_CHAN_STATUS_ERI))
x->rx_early_irq++;
}
writel(intr_status & intr_en, ioaddr + DMA_CHAN_STATUS(chan));
return ret;
}
void stmmac_dwmac4_set_mac_addr(void __iomem *ioaddr, u8 addr[6],
unsigned int high, unsigned int low)
{
unsigned long data;
data = (addr[5] << 8) | addr[4];
/* For MAC Addr registers se have to set the Address Enable (AE)
* bit that has no effect on the High Reg 0 where the bit 31 (MO)
* is RO.
*/
data |= (STMMAC_CHAN0 << GMAC_HI_DCS_SHIFT);
writel(data | GMAC_HI_REG_AE, ioaddr + high);
data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
writel(data, ioaddr + low);
}
/* Enable disable MAC RX/TX */
void stmmac_dwmac4_set_mac(void __iomem *ioaddr, bool enable)
{
u32 value = readl(ioaddr + GMAC_CONFIG);
if (enable)
value |= GMAC_CONFIG_RE | GMAC_CONFIG_TE;
else
value &= ~(GMAC_CONFIG_TE | GMAC_CONFIG_RE);
writel(value, ioaddr + GMAC_CONFIG);
}
void stmmac_dwmac4_get_mac_addr(void __iomem *ioaddr, unsigned char *addr,
unsigned int high, unsigned int low)
{
unsigned int hi_addr, lo_addr;
/* Read the MAC address from the hardware */
hi_addr = readl(ioaddr + high);
lo_addr = readl(ioaddr + low);
/* Extract the MAC address from the high and low words */
addr[0] = lo_addr & 0xff;
addr[1] = (lo_addr >> 8) & 0xff;
addr[2] = (lo_addr >> 16) & 0xff;
addr[3] = (lo_addr >> 24) & 0xff;
addr[4] = hi_addr & 0xff;
addr[5] = (hi_addr >> 8) & 0xff;
}