linux_dsm_epyc7002/net/nfc/nci/spi.c
Vincent Cuissard 2bd832459a NFC: NCI: allow spi driver to choose transfer clock
In some cases low level drivers might want to update the
SPI transfer clock (e.g. during firmware download).

This patch adds this support. Without any modification the
driver will use the default SPI clock (from pdata or device tree).

Signed-off-by: Vincent Cuissard <cuissard@marvell.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2015-10-27 04:23:34 +01:00

332 lines
7.6 KiB
C

/*
* Copyright (C) 2013 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
*
*/
#define pr_fmt(fmt) "nci_spi: %s: " fmt, __func__
#include <linux/module.h>
#include <linux/export.h>
#include <linux/spi/spi.h>
#include <linux/crc-ccitt.h>
#include <net/nfc/nci_core.h>
#define NCI_SPI_ACK_SHIFT 6
#define NCI_SPI_MSB_PAYLOAD_MASK 0x3F
#define NCI_SPI_SEND_TIMEOUT (NCI_CMD_TIMEOUT > NCI_DATA_TIMEOUT ? \
NCI_CMD_TIMEOUT : NCI_DATA_TIMEOUT)
#define NCI_SPI_DIRECT_WRITE 0x01
#define NCI_SPI_DIRECT_READ 0x02
#define ACKNOWLEDGE_NONE 0
#define ACKNOWLEDGE_ACK 1
#define ACKNOWLEDGE_NACK 2
#define CRC_INIT 0xFFFF
static int __nci_spi_send(struct nci_spi *nspi, struct sk_buff *skb,
int cs_change)
{
struct spi_message m;
struct spi_transfer t;
memset(&t, 0, sizeof(struct spi_transfer));
/* a NULL skb means we just want the SPI chip select line to raise */
if (skb) {
t.tx_buf = skb->data;
t.len = skb->len;
} else {
/* still set tx_buf non NULL to make the driver happy */
t.tx_buf = &t;
t.len = 0;
}
t.cs_change = cs_change;
t.delay_usecs = nspi->xfer_udelay;
t.speed_hz = nspi->xfer_speed_hz;
spi_message_init(&m);
spi_message_add_tail(&t, &m);
return spi_sync(nspi->spi, &m);
}
int nci_spi_send(struct nci_spi *nspi,
struct completion *write_handshake_completion,
struct sk_buff *skb)
{
unsigned int payload_len = skb->len;
unsigned char *hdr;
int ret;
long completion_rc;
/* add the NCI SPI header to the start of the buffer */
hdr = skb_push(skb, NCI_SPI_HDR_LEN);
hdr[0] = NCI_SPI_DIRECT_WRITE;
hdr[1] = nspi->acknowledge_mode;
hdr[2] = payload_len >> 8;
hdr[3] = payload_len & 0xFF;
if (nspi->acknowledge_mode == NCI_SPI_CRC_ENABLED) {
u16 crc;
crc = crc_ccitt(CRC_INIT, skb->data, skb->len);
*skb_put(skb, 1) = crc >> 8;
*skb_put(skb, 1) = crc & 0xFF;
}
if (write_handshake_completion) {
/* Trick SPI driver to raise chip select */
ret = __nci_spi_send(nspi, NULL, 1);
if (ret)
goto done;
/* wait for NFC chip hardware handshake to complete */
if (wait_for_completion_timeout(write_handshake_completion,
msecs_to_jiffies(1000)) == 0) {
ret = -ETIME;
goto done;
}
}
ret = __nci_spi_send(nspi, skb, 0);
if (ret != 0 || nspi->acknowledge_mode == NCI_SPI_CRC_DISABLED)
goto done;
reinit_completion(&nspi->req_completion);
completion_rc = wait_for_completion_interruptible_timeout(
&nspi->req_completion,
NCI_SPI_SEND_TIMEOUT);
if (completion_rc <= 0 || nspi->req_result == ACKNOWLEDGE_NACK)
ret = -EIO;
done:
kfree_skb(skb);
return ret;
}
EXPORT_SYMBOL_GPL(nci_spi_send);
/* ---- Interface to NCI SPI drivers ---- */
/**
* nci_spi_allocate_spi - allocate a new nci spi
*
* @spi: SPI device
* @acknowledge_mode: Acknowledge mode used by the NFC device
* @delay: delay between transactions in us
* @ndev: nci dev to send incoming nci frames to
*/
struct nci_spi *nci_spi_allocate_spi(struct spi_device *spi,
u8 acknowledge_mode, unsigned int delay,
struct nci_dev *ndev)
{
struct nci_spi *nspi;
nspi = devm_kzalloc(&spi->dev, sizeof(struct nci_spi), GFP_KERNEL);
if (!nspi)
return NULL;
nspi->acknowledge_mode = acknowledge_mode;
nspi->xfer_udelay = delay;
/* Use controller max SPI speed by default */
nspi->xfer_speed_hz = 0;
nspi->spi = spi;
nspi->ndev = ndev;
init_completion(&nspi->req_completion);
return nspi;
}
EXPORT_SYMBOL_GPL(nci_spi_allocate_spi);
static int send_acknowledge(struct nci_spi *nspi, u8 acknowledge)
{
struct sk_buff *skb;
unsigned char *hdr;
u16 crc;
int ret;
skb = nci_skb_alloc(nspi->ndev, 0, GFP_KERNEL);
/* add the NCI SPI header to the start of the buffer */
hdr = skb_push(skb, NCI_SPI_HDR_LEN);
hdr[0] = NCI_SPI_DIRECT_WRITE;
hdr[1] = NCI_SPI_CRC_ENABLED;
hdr[2] = acknowledge << NCI_SPI_ACK_SHIFT;
hdr[3] = 0;
crc = crc_ccitt(CRC_INIT, skb->data, skb->len);
*skb_put(skb, 1) = crc >> 8;
*skb_put(skb, 1) = crc & 0xFF;
ret = __nci_spi_send(nspi, skb, 0);
kfree_skb(skb);
return ret;
}
static struct sk_buff *__nci_spi_read(struct nci_spi *nspi)
{
struct sk_buff *skb;
struct spi_message m;
unsigned char req[2], resp_hdr[2];
struct spi_transfer tx, rx;
unsigned short rx_len = 0;
int ret;
spi_message_init(&m);
memset(&tx, 0, sizeof(struct spi_transfer));
req[0] = NCI_SPI_DIRECT_READ;
req[1] = nspi->acknowledge_mode;
tx.tx_buf = req;
tx.len = 2;
tx.cs_change = 0;
tx.speed_hz = nspi->xfer_speed_hz;
spi_message_add_tail(&tx, &m);
memset(&rx, 0, sizeof(struct spi_transfer));
rx.rx_buf = resp_hdr;
rx.len = 2;
rx.cs_change = 1;
rx.speed_hz = nspi->xfer_speed_hz;
spi_message_add_tail(&rx, &m);
ret = spi_sync(nspi->spi, &m);
if (ret)
return NULL;
if (nspi->acknowledge_mode == NCI_SPI_CRC_ENABLED)
rx_len = ((resp_hdr[0] & NCI_SPI_MSB_PAYLOAD_MASK) << 8) +
resp_hdr[1] + NCI_SPI_CRC_LEN;
else
rx_len = (resp_hdr[0] << 8) | resp_hdr[1];
skb = nci_skb_alloc(nspi->ndev, rx_len, GFP_KERNEL);
if (!skb)
return NULL;
spi_message_init(&m);
memset(&rx, 0, sizeof(struct spi_transfer));
rx.rx_buf = skb_put(skb, rx_len);
rx.len = rx_len;
rx.cs_change = 0;
rx.delay_usecs = nspi->xfer_udelay;
rx.speed_hz = nspi->xfer_speed_hz;
spi_message_add_tail(&rx, &m);
ret = spi_sync(nspi->spi, &m);
if (ret)
goto receive_error;
if (nspi->acknowledge_mode == NCI_SPI_CRC_ENABLED) {
*skb_push(skb, 1) = resp_hdr[1];
*skb_push(skb, 1) = resp_hdr[0];
}
return skb;
receive_error:
kfree_skb(skb);
return NULL;
}
static int nci_spi_check_crc(struct sk_buff *skb)
{
u16 crc_data = (skb->data[skb->len - 2] << 8) |
skb->data[skb->len - 1];
int ret;
ret = (crc_ccitt(CRC_INIT, skb->data, skb->len - NCI_SPI_CRC_LEN)
== crc_data);
skb_trim(skb, skb->len - NCI_SPI_CRC_LEN);
return ret;
}
static u8 nci_spi_get_ack(struct sk_buff *skb)
{
u8 ret;
ret = skb->data[0] >> NCI_SPI_ACK_SHIFT;
/* Remove NFCC part of the header: ACK, NACK and MSB payload len */
skb_pull(skb, 2);
return ret;
}
/**
* nci_spi_read - read frame from NCI SPI drivers
*
* @nspi: The nci spi
* Context: can sleep
*
* This call may only be used from a context that may sleep. The sleep
* is non-interruptible, and has no timeout.
*
* It returns an allocated skb containing the frame on success, or NULL.
*/
struct sk_buff *nci_spi_read(struct nci_spi *nspi)
{
struct sk_buff *skb;
/* Retrieve frame from SPI */
skb = __nci_spi_read(nspi);
if (!skb)
goto done;
if (nspi->acknowledge_mode == NCI_SPI_CRC_ENABLED) {
if (!nci_spi_check_crc(skb)) {
send_acknowledge(nspi, ACKNOWLEDGE_NACK);
goto done;
}
/* In case of acknowledged mode: if ACK or NACK received,
* unblock completion of latest frame sent.
*/
nspi->req_result = nci_spi_get_ack(skb);
if (nspi->req_result)
complete(&nspi->req_completion);
}
/* If there is no payload (ACK/NACK only frame),
* free the socket buffer
*/
if (!skb->len) {
kfree_skb(skb);
skb = NULL;
goto done;
}
if (nspi->acknowledge_mode == NCI_SPI_CRC_ENABLED)
send_acknowledge(nspi, ACKNOWLEDGE_ACK);
done:
return skb;
}
EXPORT_SYMBOL_GPL(nci_spi_read);
MODULE_LICENSE("GPL");