mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-23 00:47:11 +07:00
b993292f73
We currently have three device nodes for the same USB hardware block, as evident by the reuse of the same reg address multiple times. Now that the chipidea driver fully supports OTG with the MSM wrapper we can collapse the three nodes into one USB device node, reflecting the true nature of the hardware. Since we're here, we also mark the irq trigger flags correctly, as IRQ_TYPE_LEVEL_HIGH instead of IRQ_TYPE_NONE. Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Nicolas Dechesne <nicolas.dechesne@linaro.org> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Signed-off-by: Andy Gross <andy.gross@linaro.org>
1719 lines
37 KiB
Plaintext
1719 lines
37 KiB
Plaintext
/dts-v1/;
|
|
|
|
#include "skeleton.dtsi"
|
|
#include <dt-bindings/clock/qcom,gcc-msm8960.h>
|
|
#include <dt-bindings/reset/qcom,gcc-msm8960.h>
|
|
#include <dt-bindings/clock/qcom,mmcc-msm8960.h>
|
|
#include <dt-bindings/clock/qcom,rpmcc.h>
|
|
#include <dt-bindings/soc/qcom,gsbi.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
/ {
|
|
model = "Qualcomm APQ8064";
|
|
compatible = "qcom,apq8064";
|
|
interrupt-parent = <&intc>;
|
|
|
|
reserved-memory {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
smem_region: smem@80000000 {
|
|
reg = <0x80000000 0x200000>;
|
|
no-map;
|
|
};
|
|
|
|
wcnss_mem: wcnss@8f000000 {
|
|
reg = <0x8f000000 0x700000>;
|
|
no-map;
|
|
};
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
CPU0: cpu@0 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v1";
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc0>;
|
|
qcom,saw = <&saw0>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
CPU1: cpu@1 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v1";
|
|
device_type = "cpu";
|
|
reg = <1>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc1>;
|
|
qcom,saw = <&saw1>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
CPU2: cpu@2 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v1";
|
|
device_type = "cpu";
|
|
reg = <2>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc2>;
|
|
qcom,saw = <&saw2>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
CPU3: cpu@3 {
|
|
compatible = "qcom,krait";
|
|
enable-method = "qcom,kpss-acc-v1";
|
|
device_type = "cpu";
|
|
reg = <3>;
|
|
next-level-cache = <&L2>;
|
|
qcom,acc = <&acc3>;
|
|
qcom,saw = <&saw3>;
|
|
cpu-idle-states = <&CPU_SPC>;
|
|
};
|
|
|
|
L2: l2-cache {
|
|
compatible = "cache";
|
|
cache-level = <2>;
|
|
};
|
|
|
|
idle-states {
|
|
CPU_SPC: spc {
|
|
compatible = "qcom,idle-state-spc",
|
|
"arm,idle-state";
|
|
entry-latency-us = <400>;
|
|
exit-latency-us = <900>;
|
|
min-residency-us = <3000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
thermal-zones {
|
|
cpu-thermal0 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&gcc 7>;
|
|
coefficients = <1199 0>;
|
|
|
|
trips {
|
|
cpu_alert0: trip0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit0: trip1 {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-thermal1 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&gcc 8>;
|
|
coefficients = <1132 0>;
|
|
|
|
trips {
|
|
cpu_alert1: trip0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit1: trip1 {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-thermal2 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&gcc 9>;
|
|
coefficients = <1199 0>;
|
|
|
|
trips {
|
|
cpu_alert2: trip0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit2: trip1 {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-thermal3 {
|
|
polling-delay-passive = <250>;
|
|
polling-delay = <1000>;
|
|
|
|
thermal-sensors = <&gcc 10>;
|
|
coefficients = <1132 0>;
|
|
|
|
trips {
|
|
cpu_alert3: trip0 {
|
|
temperature = <75000>;
|
|
hysteresis = <2000>;
|
|
type = "passive";
|
|
};
|
|
cpu_crit3: trip1 {
|
|
temperature = <110000>;
|
|
hysteresis = <2000>;
|
|
type = "critical";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
cpu-pmu {
|
|
compatible = "qcom,krait-pmu";
|
|
interrupts = <1 10 0x304>;
|
|
};
|
|
|
|
clocks {
|
|
cxo_board: cxo_board {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <19200000>;
|
|
};
|
|
|
|
pxo_board {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <27000000>;
|
|
};
|
|
|
|
sleep_clk: sleep_clk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
};
|
|
};
|
|
|
|
sfpb_mutex: hwmutex {
|
|
compatible = "qcom,sfpb-mutex";
|
|
syscon = <&sfpb_wrapper_mutex 0x604 0x4>;
|
|
#hwlock-cells = <1>;
|
|
};
|
|
|
|
smem {
|
|
compatible = "qcom,smem";
|
|
memory-region = <&smem_region>;
|
|
|
|
hwlocks = <&sfpb_mutex 3>;
|
|
};
|
|
|
|
smd {
|
|
compatible = "qcom,smd";
|
|
|
|
modem@0 {
|
|
interrupts = <0 37 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&l2cc 8 3>;
|
|
qcom,smd-edge = <0>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
q6@1 {
|
|
interrupts = <0 90 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&l2cc 8 15>;
|
|
qcom,smd-edge = <1>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
dsps@3 {
|
|
interrupts = <0 138 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&sps_sic_non_secure 0x4080 0>;
|
|
qcom,smd-edge = <3>;
|
|
|
|
status = "disabled";
|
|
};
|
|
|
|
riva@6 {
|
|
interrupts = <0 198 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&l2cc 8 25>;
|
|
qcom,smd-edge = <6>;
|
|
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
smsm {
|
|
compatible = "qcom,smsm";
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
qcom,ipc-1 = <&l2cc 8 4>;
|
|
qcom,ipc-2 = <&l2cc 8 14>;
|
|
qcom,ipc-3 = <&l2cc 8 23>;
|
|
qcom,ipc-4 = <&sps_sic_non_secure 0x4094 0>;
|
|
|
|
apps_smsm: apps@0 {
|
|
reg = <0>;
|
|
#qcom,smem-state-cells = <1>;
|
|
};
|
|
|
|
modem_smsm: modem@1 {
|
|
reg = <1>;
|
|
interrupts = <0 38 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
q6_smsm: q6@2 {
|
|
reg = <2>;
|
|
interrupts = <0 89 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
wcnss_smsm: wcnss@3 {
|
|
reg = <3>;
|
|
interrupts = <0 204 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
dsps_smsm: dsps@4 {
|
|
reg = <4>;
|
|
interrupts = <0 137 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
};
|
|
|
|
firmware {
|
|
scm {
|
|
compatible = "qcom,scm-apq8064";
|
|
|
|
clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
|
|
clock-names = "core";
|
|
};
|
|
};
|
|
|
|
soc: soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
compatible = "simple-bus";
|
|
|
|
tlmm_pinmux: pinctrl@800000 {
|
|
compatible = "qcom,apq8064-pinctrl";
|
|
reg = <0x800000 0x4000>;
|
|
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&ps_hold>;
|
|
};
|
|
|
|
sfpb_wrapper_mutex: syscon@1200000 {
|
|
compatible = "syscon";
|
|
reg = <0x01200000 0x8000>;
|
|
};
|
|
|
|
intc: interrupt-controller@2000000 {
|
|
compatible = "qcom,msm-qgic2";
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
reg = <0x02000000 0x1000>,
|
|
<0x02002000 0x1000>;
|
|
};
|
|
|
|
timer@200a000 {
|
|
compatible = "qcom,kpss-timer",
|
|
"qcom,kpss-wdt-apq8064", "qcom,msm-timer";
|
|
interrupts = <1 1 0x301>,
|
|
<1 2 0x301>,
|
|
<1 3 0x301>;
|
|
reg = <0x0200a000 0x100>;
|
|
clock-frequency = <27000000>,
|
|
<32768>;
|
|
cpu-offset = <0x80000>;
|
|
};
|
|
|
|
acc0: clock-controller@2088000 {
|
|
compatible = "qcom,kpss-acc-v1";
|
|
reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
|
|
};
|
|
|
|
acc1: clock-controller@2098000 {
|
|
compatible = "qcom,kpss-acc-v1";
|
|
reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
|
|
};
|
|
|
|
acc2: clock-controller@20a8000 {
|
|
compatible = "qcom,kpss-acc-v1";
|
|
reg = <0x020a8000 0x1000>, <0x02008000 0x1000>;
|
|
};
|
|
|
|
acc3: clock-controller@20b8000 {
|
|
compatible = "qcom,kpss-acc-v1";
|
|
reg = <0x020b8000 0x1000>, <0x02008000 0x1000>;
|
|
};
|
|
|
|
saw0: power-controller@2089000 {
|
|
compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
|
|
reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
|
|
regulator;
|
|
};
|
|
|
|
saw1: power-controller@2099000 {
|
|
compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
|
|
reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
|
|
regulator;
|
|
};
|
|
|
|
saw2: power-controller@20a9000 {
|
|
compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
|
|
reg = <0x020a9000 0x1000>, <0x02009000 0x1000>;
|
|
regulator;
|
|
};
|
|
|
|
saw3: power-controller@20b9000 {
|
|
compatible = "qcom,apq8064-saw2-v1.1-cpu", "qcom,saw2";
|
|
reg = <0x020b9000 0x1000>, <0x02009000 0x1000>;
|
|
regulator;
|
|
};
|
|
|
|
sps_sic_non_secure: sps-sic-non-secure@12100000 {
|
|
compatible = "syscon";
|
|
reg = <0x12100000 0x10000>;
|
|
};
|
|
|
|
gsbi1: gsbi@12440000 {
|
|
status = "disabled";
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <1>;
|
|
reg = <0x12440000 0x100>;
|
|
clocks = <&gcc GSBI1_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
syscon-tcsr = <&tcsr>;
|
|
|
|
gsbi1_serial: serial@12450000 {
|
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
reg = <0x12450000 0x100>,
|
|
<0x12400000 0x03>;
|
|
interrupts = <0 193 0x0>;
|
|
clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
gsbi1_i2c: i2c@12460000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
pinctrl-0 = <&i2c1_pins>;
|
|
pinctrl-1 = <&i2c1_pins_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
reg = <0x12460000 0x1000>;
|
|
interrupts = <0 194 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
};
|
|
|
|
gsbi2: gsbi@12480000 {
|
|
status = "disabled";
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <2>;
|
|
reg = <0x12480000 0x100>;
|
|
clocks = <&gcc GSBI2_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
syscon-tcsr = <&tcsr>;
|
|
|
|
gsbi2_i2c: i2c@124a0000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
reg = <0x124a0000 0x1000>;
|
|
pinctrl-0 = <&i2c2_pins>;
|
|
pinctrl-1 = <&i2c2_pins_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
interrupts = <0 196 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
gsbi3: gsbi@16200000 {
|
|
status = "disabled";
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <3>;
|
|
reg = <0x16200000 0x100>;
|
|
clocks = <&gcc GSBI3_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
gsbi3_i2c: i2c@16280000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
pinctrl-0 = <&i2c3_pins>;
|
|
pinctrl-1 = <&i2c3_pins_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
reg = <0x16280000 0x1000>;
|
|
interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI3_QUP_CLK>,
|
|
<&gcc GSBI3_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
gsbi4: gsbi@16300000 {
|
|
status = "disabled";
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <4>;
|
|
reg = <0x16300000 0x03>;
|
|
clocks = <&gcc GSBI4_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
gsbi4_i2c: i2c@16380000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
pinctrl-0 = <&i2c4_pins>;
|
|
pinctrl-1 = <&i2c4_pins_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
reg = <0x16380000 0x1000>;
|
|
interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI4_QUP_CLK>,
|
|
<&gcc GSBI4_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
};
|
|
};
|
|
|
|
gsbi5: gsbi@1a200000 {
|
|
status = "disabled";
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <5>;
|
|
reg = <0x1a200000 0x03>;
|
|
clocks = <&gcc GSBI5_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
gsbi5_serial: serial@1a240000 {
|
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
reg = <0x1a240000 0x100>,
|
|
<0x1a200000 0x03>;
|
|
interrupts = <0 154 0x0>;
|
|
clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
gsbi5_spi: spi@1a280000 {
|
|
compatible = "qcom,spi-qup-v1.1.1";
|
|
reg = <0x1a280000 0x1000>;
|
|
interrupts = <0 155 0>;
|
|
pinctrl-0 = <&spi5_default>;
|
|
pinctrl-1 = <&spi5_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
};
|
|
|
|
gsbi6: gsbi@16500000 {
|
|
status = "disabled";
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <6>;
|
|
reg = <0x16500000 0x03>;
|
|
clocks = <&gcc GSBI6_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
|
|
gsbi6_serial: serial@16540000 {
|
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
reg = <0x16540000 0x100>,
|
|
<0x16500000 0x03>;
|
|
interrupts = <0 156 0x0>;
|
|
clocks = <&gcc GSBI6_UART_CLK>, <&gcc GSBI6_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
gsbi6_i2c: i2c@16580000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
pinctrl-0 = <&i2c6_pins>;
|
|
pinctrl-1 = <&i2c6_pins_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
reg = <0x16580000 0x1000>;
|
|
interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI6_QUP_CLK>,
|
|
<&gcc GSBI6_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
};
|
|
};
|
|
|
|
gsbi7: gsbi@16600000 {
|
|
status = "disabled";
|
|
compatible = "qcom,gsbi-v1.0.0";
|
|
cell-index = <7>;
|
|
reg = <0x16600000 0x100>;
|
|
clocks = <&gcc GSBI7_H_CLK>;
|
|
clock-names = "iface";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
syscon-tcsr = <&tcsr>;
|
|
|
|
gsbi7_serial: serial@16640000 {
|
|
compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
|
|
reg = <0x16640000 0x1000>,
|
|
<0x16600000 0x1000>;
|
|
interrupts = <0 158 0x0>;
|
|
clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
|
|
gsbi7_i2c: i2c@16680000 {
|
|
compatible = "qcom,i2c-qup-v1.1.1";
|
|
pinctrl-0 = <&i2c7_pins>;
|
|
pinctrl-1 = <&i2c7_pins_sleep>;
|
|
pinctrl-names = "default", "sleep";
|
|
reg = <0x16680000 0x1000>;
|
|
interrupts = <GIC_SPI 159 IRQ_TYPE_NONE>;
|
|
clocks = <&gcc GSBI7_QUP_CLK>,
|
|
<&gcc GSBI7_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
rng@1a500000 {
|
|
compatible = "qcom,prng";
|
|
reg = <0x1a500000 0x200>;
|
|
clocks = <&gcc PRNG_CLK>;
|
|
clock-names = "core";
|
|
};
|
|
|
|
ssbi@c00000 {
|
|
compatible = "qcom,ssbi";
|
|
reg = <0x00c00000 0x1000>;
|
|
qcom,controller-type = "pmic-arbiter";
|
|
|
|
pm8821: pmic@1 {
|
|
compatible = "qcom,pm8821";
|
|
interrupt-parent = <&tlmm_pinmux>;
|
|
interrupts = <76 IRQ_TYPE_LEVEL_LOW>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pm8821_mpps: mpps@50 {
|
|
compatible = "qcom,pm8821-mpp", "qcom,ssbi-mpp";
|
|
reg = <0x50>;
|
|
interrupts = <24 IRQ_TYPE_NONE>,
|
|
<25 IRQ_TYPE_NONE>,
|
|
<26 IRQ_TYPE_NONE>,
|
|
<27 IRQ_TYPE_NONE>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
};
|
|
|
|
qcom,ssbi@500000 {
|
|
compatible = "qcom,ssbi";
|
|
reg = <0x00500000 0x1000>;
|
|
qcom,controller-type = "pmic-arbiter";
|
|
|
|
pmicintc: pmic@0 {
|
|
compatible = "qcom,pm8921";
|
|
interrupt-parent = <&tlmm_pinmux>;
|
|
interrupts = <74 8>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
pm8921_gpio: gpio@150 {
|
|
|
|
compatible = "qcom,pm8921-gpio",
|
|
"qcom,ssbi-gpio";
|
|
reg = <0x150>;
|
|
interrupts = <192 IRQ_TYPE_NONE>,
|
|
<193 IRQ_TYPE_NONE>,
|
|
<194 IRQ_TYPE_NONE>,
|
|
<195 IRQ_TYPE_NONE>,
|
|
<196 IRQ_TYPE_NONE>,
|
|
<197 IRQ_TYPE_NONE>,
|
|
<198 IRQ_TYPE_NONE>,
|
|
<199 IRQ_TYPE_NONE>,
|
|
<200 IRQ_TYPE_NONE>,
|
|
<201 IRQ_TYPE_NONE>,
|
|
<202 IRQ_TYPE_NONE>,
|
|
<203 IRQ_TYPE_NONE>,
|
|
<204 IRQ_TYPE_NONE>,
|
|
<205 IRQ_TYPE_NONE>,
|
|
<206 IRQ_TYPE_NONE>,
|
|
<207 IRQ_TYPE_NONE>,
|
|
<208 IRQ_TYPE_NONE>,
|
|
<209 IRQ_TYPE_NONE>,
|
|
<210 IRQ_TYPE_NONE>,
|
|
<211 IRQ_TYPE_NONE>,
|
|
<212 IRQ_TYPE_NONE>,
|
|
<213 IRQ_TYPE_NONE>,
|
|
<214 IRQ_TYPE_NONE>,
|
|
<215 IRQ_TYPE_NONE>,
|
|
<216 IRQ_TYPE_NONE>,
|
|
<217 IRQ_TYPE_NONE>,
|
|
<218 IRQ_TYPE_NONE>,
|
|
<219 IRQ_TYPE_NONE>,
|
|
<220 IRQ_TYPE_NONE>,
|
|
<221 IRQ_TYPE_NONE>,
|
|
<222 IRQ_TYPE_NONE>,
|
|
<223 IRQ_TYPE_NONE>,
|
|
<224 IRQ_TYPE_NONE>,
|
|
<225 IRQ_TYPE_NONE>,
|
|
<226 IRQ_TYPE_NONE>,
|
|
<227 IRQ_TYPE_NONE>,
|
|
<228 IRQ_TYPE_NONE>,
|
|
<229 IRQ_TYPE_NONE>,
|
|
<230 IRQ_TYPE_NONE>,
|
|
<231 IRQ_TYPE_NONE>,
|
|
<232 IRQ_TYPE_NONE>,
|
|
<233 IRQ_TYPE_NONE>,
|
|
<234 IRQ_TYPE_NONE>,
|
|
<235 IRQ_TYPE_NONE>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
};
|
|
|
|
pm8921_mpps: mpps@50 {
|
|
compatible = "qcom,pm8921-mpp",
|
|
"qcom,ssbi-mpp";
|
|
reg = <0x50>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupts =
|
|
<128 IRQ_TYPE_NONE>,
|
|
<129 IRQ_TYPE_NONE>,
|
|
<130 IRQ_TYPE_NONE>,
|
|
<131 IRQ_TYPE_NONE>,
|
|
<132 IRQ_TYPE_NONE>,
|
|
<133 IRQ_TYPE_NONE>,
|
|
<134 IRQ_TYPE_NONE>,
|
|
<135 IRQ_TYPE_NONE>,
|
|
<136 IRQ_TYPE_NONE>,
|
|
<137 IRQ_TYPE_NONE>,
|
|
<138 IRQ_TYPE_NONE>,
|
|
<139 IRQ_TYPE_NONE>;
|
|
};
|
|
|
|
rtc@11d {
|
|
compatible = "qcom,pm8921-rtc";
|
|
interrupt-parent = <&pmicintc>;
|
|
interrupts = <39 1>;
|
|
reg = <0x11d>;
|
|
allow-set-time;
|
|
};
|
|
|
|
pwrkey@1c {
|
|
compatible = "qcom,pm8921-pwrkey";
|
|
reg = <0x1c>;
|
|
interrupt-parent = <&pmicintc>;
|
|
interrupts = <50 1>, <51 1>;
|
|
debounce = <15625>;
|
|
pull-up;
|
|
};
|
|
};
|
|
};
|
|
|
|
qfprom: qfprom@700000 {
|
|
compatible = "qcom,qfprom";
|
|
reg = <0x00700000 0x1000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
tsens_calib: calib {
|
|
reg = <0x404 0x10>;
|
|
};
|
|
tsens_backup: backup_calib {
|
|
reg = <0x414 0x10>;
|
|
};
|
|
};
|
|
|
|
gcc: clock-controller@900000 {
|
|
compatible = "qcom,gcc-apq8064";
|
|
reg = <0x00900000 0x4000>;
|
|
nvmem-cells = <&tsens_calib>, <&tsens_backup>;
|
|
nvmem-cell-names = "calib", "calib_backup";
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
#thermal-sensor-cells = <1>;
|
|
};
|
|
|
|
lcc: clock-controller@28000000 {
|
|
compatible = "qcom,lcc-apq8064";
|
|
reg = <0x28000000 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
mmcc: clock-controller@4000000 {
|
|
compatible = "qcom,mmcc-apq8064";
|
|
reg = <0x4000000 0x1000>;
|
|
#clock-cells = <1>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
l2cc: clock-controller@2011000 {
|
|
compatible = "syscon";
|
|
reg = <0x2011000 0x1000>;
|
|
};
|
|
|
|
rpm@108000 {
|
|
compatible = "qcom,rpm-apq8064";
|
|
reg = <0x108000 0x1000>;
|
|
qcom,ipc = <&l2cc 0x8 2>;
|
|
|
|
interrupts = <GIC_SPI 19 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
|
|
<GIC_SPI 22 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "ack", "err", "wakeup";
|
|
|
|
rpmcc: clock-controller {
|
|
compatible = "qcom,rpmcc-apq8064", "qcom,rpmcc";
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
regulators {
|
|
compatible = "qcom,rpm-pm8921-regulators";
|
|
|
|
pm8921_s1: s1 {};
|
|
pm8921_s2: s2 {};
|
|
pm8921_s3: s3 {};
|
|
pm8921_s4: s4 {};
|
|
pm8921_s7: s7 {};
|
|
pm8921_s8: s8 {};
|
|
|
|
pm8921_l1: l1 {};
|
|
pm8921_l2: l2 {};
|
|
pm8921_l3: l3 {};
|
|
pm8921_l4: l4 {};
|
|
pm8921_l5: l5 {};
|
|
pm8921_l6: l6 {};
|
|
pm8921_l7: l7 {};
|
|
pm8921_l8: l8 {};
|
|
pm8921_l9: l9 {};
|
|
pm8921_l10: l10 {};
|
|
pm8921_l11: l11 {};
|
|
pm8921_l12: l12 {};
|
|
pm8921_l14: l14 {};
|
|
pm8921_l15: l15 {};
|
|
pm8921_l16: l16 {};
|
|
pm8921_l17: l17 {};
|
|
pm8921_l18: l18 {};
|
|
pm8921_l21: l21 {};
|
|
pm8921_l22: l22 {};
|
|
pm8921_l23: l23 {};
|
|
pm8921_l24: l24 {};
|
|
pm8921_l25: l25 {};
|
|
pm8921_l26: l26 {};
|
|
pm8921_l27: l27 {};
|
|
pm8921_l28: l28 {};
|
|
pm8921_l29: l29 {};
|
|
|
|
pm8921_lvs1: lvs1 {};
|
|
pm8921_lvs2: lvs2 {};
|
|
pm8921_lvs3: lvs3 {};
|
|
pm8921_lvs4: lvs4 {};
|
|
pm8921_lvs5: lvs5 {};
|
|
pm8921_lvs6: lvs6 {};
|
|
pm8921_lvs7: lvs7 {};
|
|
|
|
pm8921_usb_switch: usb-switch {};
|
|
|
|
pm8921_hdmi_switch: hdmi-switch {
|
|
bias-pull-down;
|
|
};
|
|
|
|
pm8921_ncp: ncp {};
|
|
};
|
|
};
|
|
|
|
usb1: usb@12500000 {
|
|
compatible = "qcom,ci-hdrc";
|
|
reg = <0x12500000 0x200>,
|
|
<0x12500200 0x200>;
|
|
interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
assigned-clocks = <&gcc USB_HS1_XCVR_CLK>;
|
|
assigned-clock-rates = <60000000>;
|
|
resets = <&gcc USB_HS1_RESET>;
|
|
reset-names = "core";
|
|
phy_type = "ulpi";
|
|
ahb-burst-config = <0>;
|
|
phys = <&usb_hs1_phy>;
|
|
phy-names = "usb-phy";
|
|
status = "disabled";
|
|
#reset-cells = <1>;
|
|
|
|
ulpi {
|
|
usb_hs1_phy: phy {
|
|
compatible = "qcom,usb-hs-phy-apq8064",
|
|
"qcom,usb-hs-phy";
|
|
#phy-cells = <0>;
|
|
clocks = <&sleep_clk>, <&cxo_board>;
|
|
clock-names = "sleep", "ref";
|
|
resets = <&usb1 0>;
|
|
reset-names = "por";
|
|
};
|
|
};
|
|
};
|
|
|
|
usb3: usb@12520000 {
|
|
compatible = "qcom,ci-hdrc";
|
|
reg = <0x12520000 0x200>,
|
|
<0x12520200 0x200>;
|
|
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc USB_HS3_XCVR_CLK>, <&gcc USB_HS3_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
assigned-clocks = <&gcc USB_HS3_XCVR_CLK>;
|
|
assigned-clock-rates = <60000000>;
|
|
resets = <&gcc USB_HS3_RESET>;
|
|
reset-names = "core";
|
|
phy_type = "ulpi";
|
|
ahb-burst-config = <0>;
|
|
phys = <&usb_hs3_phy>;
|
|
phy-names = "usb-phy";
|
|
status = "disabled";
|
|
#reset-cells = <1>;
|
|
|
|
ulpi {
|
|
usb_hs3_phy: phy {
|
|
compatible = "qcom,usb-hs-phy-apq8064",
|
|
"qcom,usb-hs-phy";
|
|
#phy-cells = <0>;
|
|
clocks = <&sleep_clk>, <&cxo_board>;
|
|
clock-names = "sleep", "ref";
|
|
resets = <&usb3 0>;
|
|
reset-names = "por";
|
|
};
|
|
};
|
|
};
|
|
|
|
usb4: usb@12530000 {
|
|
compatible = "qcom,ci-hdrc";
|
|
reg = <0x12530000 0x200>,
|
|
<0x12530200 0x200>;
|
|
interrupts = <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&gcc USB_HS4_XCVR_CLK>, <&gcc USB_HS4_H_CLK>;
|
|
clock-names = "core", "iface";
|
|
assigned-clocks = <&gcc USB_HS4_XCVR_CLK>;
|
|
assigned-clock-rates = <60000000>;
|
|
resets = <&gcc USB_HS4_RESET>;
|
|
reset-names = "core";
|
|
phy_type = "ulpi";
|
|
ahb-burst-config = <0>;
|
|
phys = <&usb_hs4_phy>;
|
|
phy-names = "usb-phy";
|
|
status = "disabled";
|
|
#reset-cells = <1>;
|
|
|
|
ulpi {
|
|
usb_hs4_phy: phy {
|
|
compatible = "qcom,usb-hs-phy-apq8064",
|
|
"qcom,usb-hs-phy";
|
|
#phy-cells = <0>;
|
|
clocks = <&sleep_clk>, <&cxo_board>;
|
|
clock-names = "sleep", "ref";
|
|
resets = <&usb4 0>;
|
|
reset-names = "por";
|
|
};
|
|
};
|
|
};
|
|
|
|
sata_phy0: phy@1b400000 {
|
|
compatible = "qcom,apq8064-sata-phy";
|
|
status = "disabled";
|
|
reg = <0x1b400000 0x200>;
|
|
reg-names = "phy_mem";
|
|
clocks = <&gcc SATA_PHY_CFG_CLK>;
|
|
clock-names = "cfg";
|
|
#phy-cells = <0>;
|
|
};
|
|
|
|
sata0: sata@29000000 {
|
|
compatible = "qcom,apq8064-ahci", "generic-ahci";
|
|
status = "disabled";
|
|
reg = <0x29000000 0x180>;
|
|
interrupts = <GIC_SPI 209 IRQ_TYPE_NONE>;
|
|
|
|
clocks = <&gcc SFAB_SATA_S_H_CLK>,
|
|
<&gcc SATA_H_CLK>,
|
|
<&gcc SATA_A_CLK>,
|
|
<&gcc SATA_RXOOB_CLK>,
|
|
<&gcc SATA_PMALIVE_CLK>;
|
|
clock-names = "slave_iface",
|
|
"iface",
|
|
"bus",
|
|
"rxoob",
|
|
"core_pmalive";
|
|
|
|
assigned-clocks = <&gcc SATA_RXOOB_CLK>,
|
|
<&gcc SATA_PMALIVE_CLK>;
|
|
assigned-clock-rates = <100000000>, <100000000>;
|
|
|
|
phys = <&sata_phy0>;
|
|
phy-names = "sata-phy";
|
|
ports-implemented = <0x1>;
|
|
};
|
|
|
|
/* Temporary fixed regulator */
|
|
sdcc1bam:dma@12402000{
|
|
compatible = "qcom,bam-v1.3.0";
|
|
reg = <0x12402000 0x8000>;
|
|
interrupts = <0 98 0>;
|
|
clocks = <&gcc SDC1_H_CLK>;
|
|
clock-names = "bam_clk";
|
|
#dma-cells = <1>;
|
|
qcom,ee = <0>;
|
|
};
|
|
|
|
sdcc3bam:dma@12182000{
|
|
compatible = "qcom,bam-v1.3.0";
|
|
reg = <0x12182000 0x8000>;
|
|
interrupts = <0 96 0>;
|
|
clocks = <&gcc SDC3_H_CLK>;
|
|
clock-names = "bam_clk";
|
|
#dma-cells = <1>;
|
|
qcom,ee = <0>;
|
|
};
|
|
|
|
sdcc4bam:dma@121c2000{
|
|
compatible = "qcom,bam-v1.3.0";
|
|
reg = <0x121c2000 0x8000>;
|
|
interrupts = <0 95 0>;
|
|
clocks = <&gcc SDC4_H_CLK>;
|
|
clock-names = "bam_clk";
|
|
#dma-cells = <1>;
|
|
qcom,ee = <0>;
|
|
};
|
|
|
|
amba {
|
|
compatible = "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
sdcc1: sdcc@12400000 {
|
|
status = "disabled";
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdcc1_pins>;
|
|
arm,primecell-periphid = <0x00051180>;
|
|
reg = <0x12400000 0x2000>;
|
|
interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <8>;
|
|
max-frequency = <96000000>;
|
|
non-removable;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
sdcc3: sdcc@12180000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
status = "disabled";
|
|
reg = <0x12180000 0x2000>;
|
|
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <192000000>;
|
|
no-1-8-v;
|
|
dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
|
|
dma-names = "tx", "rx";
|
|
};
|
|
|
|
sdcc4: sdcc@121c0000 {
|
|
compatible = "arm,pl18x", "arm,primecell";
|
|
arm,primecell-periphid = <0x00051180>;
|
|
status = "disabled";
|
|
reg = <0x121c0000 0x2000>;
|
|
interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "cmd_irq";
|
|
clocks = <&gcc SDC4_CLK>, <&gcc SDC4_H_CLK>;
|
|
clock-names = "mclk", "apb_pclk";
|
|
bus-width = <4>;
|
|
cap-sd-highspeed;
|
|
cap-mmc-highspeed;
|
|
max-frequency = <48000000>;
|
|
dmas = <&sdcc4bam 2>, <&sdcc4bam 1>;
|
|
dma-names = "tx", "rx";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&sdc4_gpios>;
|
|
};
|
|
};
|
|
|
|
tcsr: syscon@1a400000 {
|
|
compatible = "qcom,tcsr-apq8064", "syscon";
|
|
reg = <0x1a400000 0x100>;
|
|
};
|
|
|
|
gpu: adreno-3xx@4300000 {
|
|
compatible = "qcom,adreno-3xx";
|
|
reg = <0x04300000 0x20000>;
|
|
reg-names = "kgsl_3d0_reg_memory";
|
|
interrupts = <GIC_SPI 80 0>;
|
|
interrupt-names = "kgsl_3d0_irq";
|
|
clock-names =
|
|
"core_clk",
|
|
"iface_clk",
|
|
"mem_clk",
|
|
"mem_iface_clk";
|
|
clocks =
|
|
<&mmcc GFX3D_CLK>,
|
|
<&mmcc GFX3D_AHB_CLK>,
|
|
<&mmcc GFX3D_AXI_CLK>,
|
|
<&mmcc MMSS_IMEM_AHB_CLK>;
|
|
qcom,chipid = <0x03020002>;
|
|
|
|
iommus = <&gfx3d 0
|
|
&gfx3d 1
|
|
&gfx3d 2
|
|
&gfx3d 3
|
|
&gfx3d 4
|
|
&gfx3d 5
|
|
&gfx3d 6
|
|
&gfx3d 7
|
|
&gfx3d 8
|
|
&gfx3d 9
|
|
&gfx3d 10
|
|
&gfx3d 11
|
|
&gfx3d 12
|
|
&gfx3d 13
|
|
&gfx3d 14
|
|
&gfx3d 15
|
|
&gfx3d 16
|
|
&gfx3d 17
|
|
&gfx3d 18
|
|
&gfx3d 19
|
|
&gfx3d 20
|
|
&gfx3d 21
|
|
&gfx3d 22
|
|
&gfx3d 23
|
|
&gfx3d 24
|
|
&gfx3d 25
|
|
&gfx3d 26
|
|
&gfx3d 27
|
|
&gfx3d 28
|
|
&gfx3d 29
|
|
&gfx3d 30
|
|
&gfx3d 31
|
|
&gfx3d1 0
|
|
&gfx3d1 1
|
|
&gfx3d1 2
|
|
&gfx3d1 3
|
|
&gfx3d1 4
|
|
&gfx3d1 5
|
|
&gfx3d1 6
|
|
&gfx3d1 7
|
|
&gfx3d1 8
|
|
&gfx3d1 9
|
|
&gfx3d1 10
|
|
&gfx3d1 11
|
|
&gfx3d1 12
|
|
&gfx3d1 13
|
|
&gfx3d1 14
|
|
&gfx3d1 15
|
|
&gfx3d1 16
|
|
&gfx3d1 17
|
|
&gfx3d1 18
|
|
&gfx3d1 19
|
|
&gfx3d1 20
|
|
&gfx3d1 21
|
|
&gfx3d1 22
|
|
&gfx3d1 23
|
|
&gfx3d1 24
|
|
&gfx3d1 25
|
|
&gfx3d1 26
|
|
&gfx3d1 27
|
|
&gfx3d1 28
|
|
&gfx3d1 29
|
|
&gfx3d1 30
|
|
&gfx3d1 31>;
|
|
|
|
qcom,gpu-pwrlevels {
|
|
compatible = "qcom,gpu-pwrlevels";
|
|
qcom,gpu-pwrlevel@0 {
|
|
qcom,gpu-freq = <450000000>;
|
|
};
|
|
qcom,gpu-pwrlevel@1 {
|
|
qcom,gpu-freq = <27000000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
mmss_sfpb: syscon@5700000 {
|
|
compatible = "syscon";
|
|
reg = <0x5700000 0x70>;
|
|
};
|
|
|
|
dsi0: mdss_dsi@4700000 {
|
|
compatible = "qcom,mdss-dsi-ctrl";
|
|
label = "MDSS DSI CTRL->0";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
interrupts = <GIC_SPI 82 0>;
|
|
reg = <0x04700000 0x200>;
|
|
reg-names = "dsi_ctrl";
|
|
|
|
clocks = <&mmcc DSI_M_AHB_CLK>,
|
|
<&mmcc DSI_S_AHB_CLK>,
|
|
<&mmcc AMP_AHB_CLK>,
|
|
<&mmcc DSI_CLK>,
|
|
<&mmcc DSI1_BYTE_CLK>,
|
|
<&mmcc DSI_PIXEL_CLK>,
|
|
<&mmcc DSI1_ESC_CLK>;
|
|
clock-names = "iface_clk", "bus_clk", "core_mmss_clk",
|
|
"src_clk", "byte_clk", "pixel_clk",
|
|
"core_clk";
|
|
|
|
assigned-clocks = <&mmcc DSI1_BYTE_SRC>,
|
|
<&mmcc DSI1_ESC_SRC>,
|
|
<&mmcc DSI_SRC>,
|
|
<&mmcc DSI_PIXEL_SRC>;
|
|
assigned-clock-parents = <&dsi0_phy 0>,
|
|
<&dsi0_phy 0>,
|
|
<&dsi0_phy 1>,
|
|
<&dsi0_phy 1>;
|
|
syscon-sfpb = <&mmss_sfpb>;
|
|
phys = <&dsi0_phy>;
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
dsi0_in: endpoint {
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
dsi0_out: endpoint {
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
|
|
dsi0_phy: dsi-phy@4700200 {
|
|
compatible = "qcom,dsi-phy-28nm-8960";
|
|
#clock-cells = <1>;
|
|
|
|
reg = <0x04700200 0x100>,
|
|
<0x04700300 0x200>,
|
|
<0x04700500 0x5c>;
|
|
reg-names = "dsi_pll", "dsi_phy", "dsi_phy_regulator";
|
|
clock-names = "iface_clk";
|
|
clocks = <&mmcc DSI_M_AHB_CLK>;
|
|
};
|
|
|
|
|
|
mdp_port0: iommu@7500000 {
|
|
compatible = "qcom,apq8064-iommu";
|
|
#iommu-cells = <1>;
|
|
clock-names =
|
|
"smmu_pclk",
|
|
"iommu_clk";
|
|
clocks =
|
|
<&mmcc SMMU_AHB_CLK>,
|
|
<&mmcc MDP_AXI_CLK>;
|
|
reg = <0x07500000 0x100000>;
|
|
interrupts =
|
|
<GIC_SPI 63 0>,
|
|
<GIC_SPI 64 0>;
|
|
qcom,ncb = <2>;
|
|
};
|
|
|
|
mdp_port1: iommu@7600000 {
|
|
compatible = "qcom,apq8064-iommu";
|
|
#iommu-cells = <1>;
|
|
clock-names =
|
|
"smmu_pclk",
|
|
"iommu_clk";
|
|
clocks =
|
|
<&mmcc SMMU_AHB_CLK>,
|
|
<&mmcc MDP_AXI_CLK>;
|
|
reg = <0x07600000 0x100000>;
|
|
interrupts =
|
|
<GIC_SPI 61 0>,
|
|
<GIC_SPI 62 0>;
|
|
qcom,ncb = <2>;
|
|
};
|
|
|
|
gfx3d: iommu@7c00000 {
|
|
compatible = "qcom,apq8064-iommu";
|
|
#iommu-cells = <1>;
|
|
clock-names =
|
|
"smmu_pclk",
|
|
"iommu_clk";
|
|
clocks =
|
|
<&mmcc SMMU_AHB_CLK>,
|
|
<&mmcc GFX3D_AXI_CLK>;
|
|
reg = <0x07c00000 0x100000>;
|
|
interrupts =
|
|
<GIC_SPI 69 0>,
|
|
<GIC_SPI 70 0>;
|
|
qcom,ncb = <3>;
|
|
};
|
|
|
|
gfx3d1: iommu@7d00000 {
|
|
compatible = "qcom,apq8064-iommu";
|
|
#iommu-cells = <1>;
|
|
clock-names =
|
|
"smmu_pclk",
|
|
"iommu_clk";
|
|
clocks =
|
|
<&mmcc SMMU_AHB_CLK>,
|
|
<&mmcc GFX3D_AXI_CLK>;
|
|
reg = <0x07d00000 0x100000>;
|
|
interrupts =
|
|
<GIC_SPI 210 0>,
|
|
<GIC_SPI 211 0>;
|
|
qcom,ncb = <3>;
|
|
};
|
|
|
|
pcie: pci@1b500000 {
|
|
compatible = "qcom,pcie-apq8064", "snps,dw-pcie";
|
|
reg = <0x1b500000 0x1000
|
|
0x1b502000 0x80
|
|
0x1b600000 0x100
|
|
0x0ff00000 0x100000>;
|
|
reg-names = "dbi", "elbi", "parf", "config";
|
|
device_type = "pci";
|
|
linux,pci-domain = <0>;
|
|
bus-range = <0x00 0xff>;
|
|
num-lanes = <1>;
|
|
#address-cells = <3>;
|
|
#size-cells = <2>;
|
|
ranges = <0x81000000 0 0 0x0fe00000 0 0x00100000 /* I/O */
|
|
0x82000000 0 0 0x08000000 0 0x07e00000>; /* memory */
|
|
interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
|
|
interrupt-names = "msi";
|
|
#interrupt-cells = <1>;
|
|
interrupt-map-mask = <0 0 0 0x7>;
|
|
interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
|
|
<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
|
|
<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
|
|
<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
|
|
clocks = <&gcc PCIE_A_CLK>,
|
|
<&gcc PCIE_H_CLK>,
|
|
<&gcc PCIE_PHY_REF_CLK>;
|
|
clock-names = "core", "iface", "phy";
|
|
resets = <&gcc PCIE_ACLK_RESET>,
|
|
<&gcc PCIE_HCLK_RESET>,
|
|
<&gcc PCIE_POR_RESET>,
|
|
<&gcc PCIE_PCI_RESET>,
|
|
<&gcc PCIE_PHY_RESET>;
|
|
reset-names = "axi", "ahb", "por", "pci", "phy";
|
|
status = "disabled";
|
|
};
|
|
|
|
hdmi: hdmi-tx@4a00000 {
|
|
compatible = "qcom,hdmi-tx-8960";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&hdmi_pinctrl>;
|
|
reg = <0x04a00000 0x2f0>;
|
|
reg-names = "core_physical";
|
|
interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mmcc HDMI_APP_CLK>,
|
|
<&mmcc HDMI_M_AHB_CLK>,
|
|
<&mmcc HDMI_S_AHB_CLK>;
|
|
clock-names = "core_clk",
|
|
"master_iface_clk",
|
|
"slave_iface_clk";
|
|
|
|
phys = <&hdmi_phy>;
|
|
phy-names = "hdmi-phy";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
hdmi_in: endpoint {
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
hdmi_out: endpoint {
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
hdmi_phy: hdmi-phy@4a00400 {
|
|
compatible = "qcom,hdmi-phy-8960";
|
|
reg = <0x4a00400 0x60>,
|
|
<0x4a00500 0x100>;
|
|
reg-names = "hdmi_phy",
|
|
"hdmi_pll";
|
|
|
|
clocks = <&mmcc HDMI_S_AHB_CLK>;
|
|
clock-names = "slave_iface_clk";
|
|
};
|
|
|
|
mdp: mdp@5100000 {
|
|
compatible = "qcom,mdp4";
|
|
reg = <0x05100000 0xf0000>;
|
|
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
|
|
clocks = <&mmcc MDP_CLK>,
|
|
<&mmcc MDP_AHB_CLK>,
|
|
<&mmcc MDP_AXI_CLK>,
|
|
<&mmcc MDP_LUT_CLK>,
|
|
<&mmcc HDMI_TV_CLK>,
|
|
<&mmcc MDP_TV_CLK>;
|
|
clock-names = "core_clk",
|
|
"iface_clk",
|
|
"bus_clk",
|
|
"lut_clk",
|
|
"hdmi_clk",
|
|
"tv_clk";
|
|
|
|
iommus = <&mdp_port0 0
|
|
&mdp_port0 2
|
|
&mdp_port1 0
|
|
&mdp_port1 2>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
mdp_lvds_out: endpoint {
|
|
};
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
mdp_dsi1_out: endpoint {
|
|
};
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
mdp_dsi2_out: endpoint {
|
|
};
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
mdp_dtv_out: endpoint {
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
riva: riva-pil@3204000 {
|
|
compatible = "qcom,riva-pil";
|
|
|
|
reg = <0x03200800 0x1000>, <0x03202000 0x2000>, <0x03204000 0x100>;
|
|
reg-names = "ccu", "dxe", "pmu";
|
|
|
|
interrupts-extended = <&intc GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
|
|
<&wcnss_smsm 6 IRQ_TYPE_EDGE_RISING>;
|
|
interrupt-names = "wdog", "fatal";
|
|
|
|
memory-region = <&wcnss_mem>;
|
|
|
|
vddcx-supply = <&pm8921_s3>;
|
|
vddmx-supply = <&pm8921_l24>;
|
|
vddpx-supply = <&pm8921_s4>;
|
|
|
|
status = "disabled";
|
|
|
|
iris {
|
|
compatible = "qcom,wcn3660";
|
|
|
|
clocks = <&cxo_board>;
|
|
clock-names = "xo";
|
|
|
|
vddxo-supply = <&pm8921_l4>;
|
|
vddrfa-supply = <&pm8921_s2>;
|
|
vddpa-supply = <&pm8921_l10>;
|
|
vdddig-supply = <&pm8921_lvs2>;
|
|
};
|
|
|
|
smd-edge {
|
|
interrupts = <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>;
|
|
|
|
qcom,ipc = <&l2cc 8 25>;
|
|
qcom,smd-edge = <6>;
|
|
|
|
label = "riva";
|
|
|
|
wcnss {
|
|
compatible = "qcom,wcnss";
|
|
qcom,smd-channels = "WCNSS_CTRL";
|
|
|
|
qcom,mmio = <&riva>;
|
|
|
|
bt {
|
|
compatible = "qcom,wcnss-bt";
|
|
};
|
|
|
|
wifi {
|
|
compatible = "qcom,wcnss-wlan";
|
|
|
|
interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
|
|
<GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>;
|
|
interrupt-names = "tx", "rx";
|
|
|
|
qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
|
|
qcom,smem-state-names = "tx-enable", "tx-rings-empty";
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etb@1a01000 {
|
|
compatible = "coresight-etb10", "arm,primecell";
|
|
reg = <0x1a01000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_QDSS_CLK>;
|
|
clock-names = "apb_pclk";
|
|
|
|
port {
|
|
etb_in: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&replicator_out0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
tpiu@1a03000 {
|
|
compatible = "arm,coresight-tpiu", "arm,primecell";
|
|
reg = <0x1a03000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_QDSS_CLK>;
|
|
clock-names = "apb_pclk";
|
|
|
|
port {
|
|
tpiu_in: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&replicator_out1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
replicator {
|
|
compatible = "arm,coresight-replicator";
|
|
|
|
clocks = <&rpmcc RPM_QDSS_CLK>;
|
|
clock-names = "apb_pclk";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
replicator_out0: endpoint {
|
|
remote-endpoint = <&etb_in>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
replicator_out1: endpoint {
|
|
remote-endpoint = <&tpiu_in>;
|
|
};
|
|
};
|
|
port@2 {
|
|
reg = <0>;
|
|
replicator_in: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&funnel_out>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
funnel@1a04000 {
|
|
compatible = "arm,coresight-funnel", "arm,primecell";
|
|
reg = <0x1a04000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_QDSS_CLK>;
|
|
clock-names = "apb_pclk";
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
/*
|
|
* Not described input ports:
|
|
* 2 - connected to STM component
|
|
* 3 - not-connected
|
|
* 6 - not-connected
|
|
* 7 - not-connected
|
|
*/
|
|
port@0 {
|
|
reg = <0>;
|
|
funnel_in0: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&etm0_out>;
|
|
};
|
|
};
|
|
port@1 {
|
|
reg = <1>;
|
|
funnel_in1: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&etm1_out>;
|
|
};
|
|
};
|
|
port@4 {
|
|
reg = <4>;
|
|
funnel_in4: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&etm2_out>;
|
|
};
|
|
};
|
|
port@5 {
|
|
reg = <5>;
|
|
funnel_in5: endpoint {
|
|
slave-mode;
|
|
remote-endpoint = <&etm3_out>;
|
|
};
|
|
};
|
|
port@8 {
|
|
reg = <0>;
|
|
funnel_out: endpoint {
|
|
remote-endpoint = <&replicator_in>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@1a1c000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0x1a1c000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_QDSS_CLK>;
|
|
clock-names = "apb_pclk";
|
|
|
|
cpu = <&CPU0>;
|
|
|
|
port {
|
|
etm0_out: endpoint {
|
|
remote-endpoint = <&funnel_in0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@1a1d000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0x1a1d000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_QDSS_CLK>;
|
|
clock-names = "apb_pclk";
|
|
|
|
cpu = <&CPU1>;
|
|
|
|
port {
|
|
etm1_out: endpoint {
|
|
remote-endpoint = <&funnel_in1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@1a1e000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0x1a1e000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_QDSS_CLK>;
|
|
clock-names = "apb_pclk";
|
|
|
|
cpu = <&CPU2>;
|
|
|
|
port {
|
|
etm2_out: endpoint {
|
|
remote-endpoint = <&funnel_in4>;
|
|
};
|
|
};
|
|
};
|
|
|
|
etm@1a1f000 {
|
|
compatible = "arm,coresight-etm3x", "arm,primecell";
|
|
reg = <0x1a1f000 0x1000>;
|
|
|
|
clocks = <&rpmcc RPM_QDSS_CLK>;
|
|
clock-names = "apb_pclk";
|
|
|
|
cpu = <&CPU3>;
|
|
|
|
port {
|
|
etm3_out: endpoint {
|
|
remote-endpoint = <&funnel_in5>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
#include "qcom-apq8064-pins.dtsi"
|