mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-05 21:16:39 +07:00
af3502184a
This patch cleans up duplicate includes in drivers/atm/ Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2661 lines
82 KiB
C
2661 lines
82 KiB
C
/* lanai.c -- Copyright 1999-2003 by Mitchell Blank Jr <mitch@sfgoth.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version
|
|
* 2 of the License, or (at your option) any later version.
|
|
*
|
|
* This driver supports ATM cards based on the Efficient "Lanai"
|
|
* chipset such as the Speedstream 3010 and the ENI-25p. The
|
|
* Speedstream 3060 is currently not supported since we don't
|
|
* have the code to drive the on-board Alcatel DSL chipset (yet).
|
|
*
|
|
* Thanks to Efficient for supporting this project with hardware,
|
|
* documentation, and by answering my questions.
|
|
*
|
|
* Things not working yet:
|
|
*
|
|
* o We don't support the Speedstream 3060 yet - this card has
|
|
* an on-board DSL modem chip by Alcatel and the driver will
|
|
* need some extra code added to handle it
|
|
*
|
|
* o Note that due to limitations of the Lanai only one VCC can be
|
|
* in CBR at once
|
|
*
|
|
* o We don't currently parse the EEPROM at all. The code is all
|
|
* there as per the spec, but it doesn't actually work. I think
|
|
* there may be some issues with the docs. Anyway, do NOT
|
|
* enable it yet - bugs in that code may actually damage your
|
|
* hardware! Because of this you should hardware an ESI before
|
|
* trying to use this in a LANE or MPOA environment.
|
|
*
|
|
* o AAL0 is stubbed in but the actual rx/tx path isn't written yet:
|
|
* vcc_tx_aal0() needs to send or queue a SKB
|
|
* vcc_tx_unqueue_aal0() needs to attempt to send queued SKBs
|
|
* vcc_rx_aal0() needs to handle AAL0 interrupts
|
|
* This isn't too much work - I just wanted to get other things
|
|
* done first.
|
|
*
|
|
* o lanai_change_qos() isn't written yet
|
|
*
|
|
* o There aren't any ioctl's yet -- I'd like to eventually support
|
|
* setting loopback and LED modes that way.
|
|
*
|
|
* o If the segmentation engine or DMA gets shut down we should restart
|
|
* card as per section 17.0i. (see lanai_reset)
|
|
*
|
|
* o setsockopt(SO_CIRANGE) isn't done (although despite what the
|
|
* API says it isn't exactly commonly implemented)
|
|
*/
|
|
|
|
/* Version history:
|
|
* v.1.00 -- 26-JUL-2003 -- PCI/DMA updates
|
|
* v.0.02 -- 11-JAN-2000 -- Endian fixes
|
|
* v.0.01 -- 30-NOV-1999 -- Initial release
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/atmdev.h>
|
|
#include <asm/io.h>
|
|
#include <asm/byteorder.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
|
|
/* -------------------- TUNABLE PARAMATERS: */
|
|
|
|
/*
|
|
* Maximum number of VCIs per card. Setting it lower could theoretically
|
|
* save some memory, but since we allocate our vcc list with get_free_pages,
|
|
* it's not really likely for most architectures
|
|
*/
|
|
#define NUM_VCI (1024)
|
|
|
|
/*
|
|
* Enable extra debugging
|
|
*/
|
|
#define DEBUG
|
|
/*
|
|
* Debug _all_ register operations with card, except the memory test.
|
|
* Also disables the timed poll to prevent extra chattiness. This
|
|
* isn't for normal use
|
|
*/
|
|
#undef DEBUG_RW
|
|
|
|
/*
|
|
* The programming guide specifies a full test of the on-board SRAM
|
|
* at initialization time. Undefine to remove this
|
|
*/
|
|
#define FULL_MEMORY_TEST
|
|
|
|
/*
|
|
* This is the number of (4 byte) service entries that we will
|
|
* try to allocate at startup. Note that we will end up with
|
|
* one PAGE_SIZE's worth regardless of what this is set to
|
|
*/
|
|
#define SERVICE_ENTRIES (1024)
|
|
/* TODO: make above a module load-time option */
|
|
|
|
/*
|
|
* We normally read the onboard EEPROM in order to discover our MAC
|
|
* address. Undefine to _not_ do this
|
|
*/
|
|
/* #define READ_EEPROM */ /* ***DONT ENABLE YET*** */
|
|
/* TODO: make above a module load-time option (also) */
|
|
|
|
/*
|
|
* Depth of TX fifo (in 128 byte units; range 2-31)
|
|
* Smaller numbers are better for network latency
|
|
* Larger numbers are better for PCI latency
|
|
* I'm really sure where the best tradeoff is, but the BSD driver uses
|
|
* 7 and it seems to work ok.
|
|
*/
|
|
#define TX_FIFO_DEPTH (7)
|
|
/* TODO: make above a module load-time option */
|
|
|
|
/*
|
|
* How often (in jiffies) we will try to unstick stuck connections -
|
|
* shouldn't need to happen much
|
|
*/
|
|
#define LANAI_POLL_PERIOD (10*HZ)
|
|
/* TODO: make above a module load-time option */
|
|
|
|
/*
|
|
* When allocating an AAL5 receiving buffer, try to make it at least
|
|
* large enough to hold this many max_sdu sized PDUs
|
|
*/
|
|
#define AAL5_RX_MULTIPLIER (3)
|
|
/* TODO: make above a module load-time option */
|
|
|
|
/*
|
|
* Same for transmitting buffer
|
|
*/
|
|
#define AAL5_TX_MULTIPLIER (3)
|
|
/* TODO: make above a module load-time option */
|
|
|
|
/*
|
|
* When allocating an AAL0 transmiting buffer, how many cells should fit.
|
|
* Remember we'll end up with a PAGE_SIZE of them anyway, so this isn't
|
|
* really critical
|
|
*/
|
|
#define AAL0_TX_MULTIPLIER (40)
|
|
/* TODO: make above a module load-time option */
|
|
|
|
/*
|
|
* How large should we make the AAL0 receiving buffer. Remember that this
|
|
* is shared between all AAL0 VC's
|
|
*/
|
|
#define AAL0_RX_BUFFER_SIZE (PAGE_SIZE)
|
|
/* TODO: make above a module load-time option */
|
|
|
|
/*
|
|
* Should we use Lanai's "powerdown" feature when no vcc's are bound?
|
|
*/
|
|
/* #define USE_POWERDOWN */
|
|
/* TODO: make above a module load-time option (also) */
|
|
|
|
/* -------------------- DEBUGGING AIDS: */
|
|
|
|
#define DEV_LABEL "lanai"
|
|
|
|
#ifdef DEBUG
|
|
|
|
#define DPRINTK(format, args...) \
|
|
printk(KERN_DEBUG DEV_LABEL ": " format, ##args)
|
|
#define APRINTK(truth, format, args...) \
|
|
do { \
|
|
if (unlikely(!(truth))) \
|
|
printk(KERN_ERR DEV_LABEL ": " format, ##args); \
|
|
} while (0)
|
|
|
|
#else /* !DEBUG */
|
|
|
|
#define DPRINTK(format, args...)
|
|
#define APRINTK(truth, format, args...)
|
|
|
|
#endif /* DEBUG */
|
|
|
|
#ifdef DEBUG_RW
|
|
#define RWDEBUG(format, args...) \
|
|
printk(KERN_DEBUG DEV_LABEL ": " format, ##args)
|
|
#else /* !DEBUG_RW */
|
|
#define RWDEBUG(format, args...)
|
|
#endif
|
|
|
|
/* -------------------- DATA DEFINITIONS: */
|
|
|
|
#define LANAI_MAPPING_SIZE (0x40000)
|
|
#define LANAI_EEPROM_SIZE (128)
|
|
|
|
typedef int vci_t;
|
|
typedef void __iomem *bus_addr_t;
|
|
|
|
/* DMA buffer in host memory for TX, RX, or service list. */
|
|
struct lanai_buffer {
|
|
u32 *start; /* From get_free_pages */
|
|
u32 *end; /* One past last byte */
|
|
u32 *ptr; /* Pointer to current host location */
|
|
dma_addr_t dmaaddr;
|
|
};
|
|
|
|
struct lanai_vcc_stats {
|
|
unsigned rx_nomem;
|
|
union {
|
|
struct {
|
|
unsigned rx_badlen;
|
|
unsigned service_trash;
|
|
unsigned service_stream;
|
|
unsigned service_rxcrc;
|
|
} aal5;
|
|
struct {
|
|
} aal0;
|
|
} x;
|
|
};
|
|
|
|
struct lanai_dev; /* Forward declaration */
|
|
|
|
/*
|
|
* This is the card-specific per-vcc data. Note that unlike some other
|
|
* drivers there is NOT a 1-to-1 correspondance between these and
|
|
* atm_vcc's - each one of these represents an actual 2-way vcc, but
|
|
* an atm_vcc can be 1-way and share with a 1-way vcc in the other
|
|
* direction. To make it weirder, there can even be 0-way vccs
|
|
* bound to us, waiting to do a change_qos
|
|
*/
|
|
struct lanai_vcc {
|
|
bus_addr_t vbase; /* Base of VCC's registers */
|
|
struct lanai_vcc_stats stats;
|
|
int nref; /* # of atm_vcc's who reference us */
|
|
vci_t vci;
|
|
struct {
|
|
struct lanai_buffer buf;
|
|
struct atm_vcc *atmvcc; /* atm_vcc who is receiver */
|
|
} rx;
|
|
struct {
|
|
struct lanai_buffer buf;
|
|
struct atm_vcc *atmvcc; /* atm_vcc who is transmitter */
|
|
int endptr; /* last endptr from service entry */
|
|
struct sk_buff_head backlog;
|
|
void (*unqueue)(struct lanai_dev *, struct lanai_vcc *, int);
|
|
} tx;
|
|
};
|
|
|
|
enum lanai_type {
|
|
lanai2 = PCI_DEVICE_ID_EF_ATM_LANAI2,
|
|
lanaihb = PCI_DEVICE_ID_EF_ATM_LANAIHB
|
|
};
|
|
|
|
struct lanai_dev_stats {
|
|
unsigned ovfl_trash; /* # of cells dropped - buffer overflow */
|
|
unsigned vci_trash; /* # of cells dropped - closed vci */
|
|
unsigned hec_err; /* # of cells dropped - bad HEC */
|
|
unsigned atm_ovfl; /* # of cells dropped - rx fifo overflow */
|
|
unsigned pcierr_parity_detect;
|
|
unsigned pcierr_serr_set;
|
|
unsigned pcierr_master_abort;
|
|
unsigned pcierr_m_target_abort;
|
|
unsigned pcierr_s_target_abort;
|
|
unsigned pcierr_master_parity;
|
|
unsigned service_notx;
|
|
unsigned service_norx;
|
|
unsigned service_rxnotaal5;
|
|
unsigned dma_reenable;
|
|
unsigned card_reset;
|
|
};
|
|
|
|
struct lanai_dev {
|
|
bus_addr_t base;
|
|
struct lanai_dev_stats stats;
|
|
struct lanai_buffer service;
|
|
struct lanai_vcc **vccs;
|
|
#ifdef USE_POWERDOWN
|
|
int nbound; /* number of bound vccs */
|
|
#endif
|
|
enum lanai_type type;
|
|
vci_t num_vci; /* Currently just NUM_VCI */
|
|
u8 eeprom[LANAI_EEPROM_SIZE];
|
|
u32 serialno, magicno;
|
|
struct pci_dev *pci;
|
|
DECLARE_BITMAP(backlog_vccs, NUM_VCI); /* VCCs with tx backlog */
|
|
DECLARE_BITMAP(transmit_ready, NUM_VCI); /* VCCs with transmit space */
|
|
struct timer_list timer;
|
|
int naal0;
|
|
struct lanai_buffer aal0buf; /* AAL0 RX buffers */
|
|
u32 conf1, conf2; /* CONFIG[12] registers */
|
|
u32 status; /* STATUS register */
|
|
spinlock_t endtxlock;
|
|
spinlock_t servicelock;
|
|
struct atm_vcc *cbrvcc;
|
|
int number;
|
|
int board_rev;
|
|
/* TODO - look at race conditions with maintence of conf1/conf2 */
|
|
/* TODO - transmit locking: should we use _irq not _irqsave? */
|
|
/* TODO - organize above in some rational fashion (see <asm/cache.h>) */
|
|
};
|
|
|
|
/*
|
|
* Each device has two bitmaps for each VCC (baclog_vccs and transmit_ready)
|
|
* This function iterates one of these, calling a given function for each
|
|
* vci with their bit set
|
|
*/
|
|
static void vci_bitfield_iterate(struct lanai_dev *lanai,
|
|
const unsigned long *lp,
|
|
void (*func)(struct lanai_dev *,vci_t vci))
|
|
{
|
|
vci_t vci = find_first_bit(lp, NUM_VCI);
|
|
while (vci < NUM_VCI) {
|
|
func(lanai, vci);
|
|
vci = find_next_bit(lp, NUM_VCI, vci + 1);
|
|
}
|
|
}
|
|
|
|
/* -------------------- BUFFER UTILITIES: */
|
|
|
|
/*
|
|
* Lanai needs DMA buffers aligned to 256 bytes of at least 1024 bytes -
|
|
* usually any page allocation will do. Just to be safe in case
|
|
* PAGE_SIZE is insanely tiny, though...
|
|
*/
|
|
#define LANAI_PAGE_SIZE ((PAGE_SIZE >= 1024) ? PAGE_SIZE : 1024)
|
|
|
|
/*
|
|
* Allocate a buffer in host RAM for service list, RX, or TX
|
|
* Returns buf->start==NULL if no memory
|
|
* Note that the size will be rounded up 2^n bytes, and
|
|
* if we can't allocate that we'll settle for something smaller
|
|
* until minbytes
|
|
*/
|
|
static void lanai_buf_allocate(struct lanai_buffer *buf,
|
|
size_t bytes, size_t minbytes, struct pci_dev *pci)
|
|
{
|
|
int size;
|
|
|
|
if (bytes > (128 * 1024)) /* max lanai buffer size */
|
|
bytes = 128 * 1024;
|
|
for (size = LANAI_PAGE_SIZE; size < bytes; size *= 2)
|
|
;
|
|
if (minbytes < LANAI_PAGE_SIZE)
|
|
minbytes = LANAI_PAGE_SIZE;
|
|
do {
|
|
/*
|
|
* Technically we could use non-consistent mappings for
|
|
* everything, but the way the lanai uses DMA memory would
|
|
* make that a terrific pain. This is much simpler.
|
|
*/
|
|
buf->start = pci_alloc_consistent(pci, size, &buf->dmaaddr);
|
|
if (buf->start != NULL) { /* Success */
|
|
/* Lanai requires 256-byte alignment of DMA bufs */
|
|
APRINTK((buf->dmaaddr & ~0xFFFFFF00) == 0,
|
|
"bad dmaaddr: 0x%lx\n",
|
|
(unsigned long) buf->dmaaddr);
|
|
buf->ptr = buf->start;
|
|
buf->end = (u32 *)
|
|
(&((unsigned char *) buf->start)[size]);
|
|
memset(buf->start, 0, size);
|
|
break;
|
|
}
|
|
size /= 2;
|
|
} while (size >= minbytes);
|
|
}
|
|
|
|
/* size of buffer in bytes */
|
|
static inline size_t lanai_buf_size(const struct lanai_buffer *buf)
|
|
{
|
|
return ((unsigned long) buf->end) - ((unsigned long) buf->start);
|
|
}
|
|
|
|
static void lanai_buf_deallocate(struct lanai_buffer *buf,
|
|
struct pci_dev *pci)
|
|
{
|
|
if (buf->start != NULL) {
|
|
pci_free_consistent(pci, lanai_buf_size(buf),
|
|
buf->start, buf->dmaaddr);
|
|
buf->start = buf->end = buf->ptr = NULL;
|
|
}
|
|
}
|
|
|
|
/* size of buffer as "card order" (0=1k .. 7=128k) */
|
|
static int lanai_buf_size_cardorder(const struct lanai_buffer *buf)
|
|
{
|
|
int order = get_order(lanai_buf_size(buf)) + (PAGE_SHIFT - 10);
|
|
|
|
/* This can only happen if PAGE_SIZE is gigantic, but just in case */
|
|
if (order > 7)
|
|
order = 7;
|
|
return order;
|
|
}
|
|
|
|
/* -------------------- PORT I/O UTILITIES: */
|
|
|
|
/* Registers (and their bit-fields) */
|
|
enum lanai_register {
|
|
Reset_Reg = 0x00, /* Reset; read for chip type; bits: */
|
|
#define RESET_GET_BOARD_REV(x) (((x)>> 0)&0x03) /* Board revision */
|
|
#define RESET_GET_BOARD_ID(x) (((x)>> 2)&0x03) /* Board ID */
|
|
#define BOARD_ID_LANAI256 (0) /* 25.6M adapter card */
|
|
Endian_Reg = 0x04, /* Endian setting */
|
|
IntStatus_Reg = 0x08, /* Interrupt status */
|
|
IntStatusMasked_Reg = 0x0C, /* Interrupt status (masked) */
|
|
IntAck_Reg = 0x10, /* Interrupt acknowledge */
|
|
IntAckMasked_Reg = 0x14, /* Interrupt acknowledge (masked) */
|
|
IntStatusSet_Reg = 0x18, /* Get status + enable/disable */
|
|
IntStatusSetMasked_Reg = 0x1C, /* Get status + en/di (masked) */
|
|
IntControlEna_Reg = 0x20, /* Interrupt control enable */
|
|
IntControlDis_Reg = 0x24, /* Interrupt control disable */
|
|
Status_Reg = 0x28, /* Status */
|
|
#define STATUS_PROMDATA (0x00000001) /* PROM_DATA pin */
|
|
#define STATUS_WAITING (0x00000002) /* Interrupt being delayed */
|
|
#define STATUS_SOOL (0x00000004) /* SOOL alarm */
|
|
#define STATUS_LOCD (0x00000008) /* LOCD alarm */
|
|
#define STATUS_LED (0x00000010) /* LED (HAPPI) output */
|
|
#define STATUS_GPIN (0x00000020) /* GPIN pin */
|
|
#define STATUS_BUTTBUSY (0x00000040) /* Butt register is pending */
|
|
Config1_Reg = 0x2C, /* Config word 1; bits: */
|
|
#define CONFIG1_PROMDATA (0x00000001) /* PROM_DATA pin */
|
|
#define CONFIG1_PROMCLK (0x00000002) /* PROM_CLK pin */
|
|
#define CONFIG1_SET_READMODE(x) ((x)*0x004) /* PCI BM reads; values: */
|
|
#define READMODE_PLAIN (0) /* Plain memory read */
|
|
#define READMODE_LINE (2) /* Memory read line */
|
|
#define READMODE_MULTIPLE (3) /* Memory read multiple */
|
|
#define CONFIG1_DMA_ENABLE (0x00000010) /* Turn on DMA */
|
|
#define CONFIG1_POWERDOWN (0x00000020) /* Turn off clocks */
|
|
#define CONFIG1_SET_LOOPMODE(x) ((x)*0x080) /* Clock&loop mode; values: */
|
|
#define LOOPMODE_NORMAL (0) /* Normal - no loop */
|
|
#define LOOPMODE_TIME (1)
|
|
#define LOOPMODE_DIAG (2)
|
|
#define LOOPMODE_LINE (3)
|
|
#define CONFIG1_MASK_LOOPMODE (0x00000180)
|
|
#define CONFIG1_SET_LEDMODE(x) ((x)*0x0200) /* Mode of LED; values: */
|
|
#define LEDMODE_NOT_SOOL (0) /* !SOOL */
|
|
#define LEDMODE_OFF (1) /* 0 */
|
|
#define LEDMODE_ON (2) /* 1 */
|
|
#define LEDMODE_NOT_LOCD (3) /* !LOCD */
|
|
#define LEDMORE_GPIN (4) /* GPIN */
|
|
#define LEDMODE_NOT_GPIN (7) /* !GPIN */
|
|
#define CONFIG1_MASK_LEDMODE (0x00000E00)
|
|
#define CONFIG1_GPOUT1 (0x00001000) /* Toggle for reset */
|
|
#define CONFIG1_GPOUT2 (0x00002000) /* Loopback PHY */
|
|
#define CONFIG1_GPOUT3 (0x00004000) /* Loopback lanai */
|
|
Config2_Reg = 0x30, /* Config word 2; bits: */
|
|
#define CONFIG2_HOWMANY (0x00000001) /* >512 VCIs? */
|
|
#define CONFIG2_PTI7_MODE (0x00000002) /* Make PTI=7 RM, not OAM */
|
|
#define CONFIG2_VPI_CHK_DIS (0x00000004) /* Ignore RX VPI value */
|
|
#define CONFIG2_HEC_DROP (0x00000008) /* Drop cells w/ HEC errors */
|
|
#define CONFIG2_VCI0_NORMAL (0x00000010) /* Treat VCI=0 normally */
|
|
#define CONFIG2_CBR_ENABLE (0x00000020) /* Deal with CBR traffic */
|
|
#define CONFIG2_TRASH_ALL (0x00000040) /* Trashing incoming cells */
|
|
#define CONFIG2_TX_DISABLE (0x00000080) /* Trashing outgoing cells */
|
|
#define CONFIG2_SET_TRASH (0x00000100) /* Turn trashing on */
|
|
Statistics_Reg = 0x34, /* Statistics; bits: */
|
|
#define STATS_GET_FIFO_OVFL(x) (((x)>> 0)&0xFF) /* FIFO overflowed */
|
|
#define STATS_GET_HEC_ERR(x) (((x)>> 8)&0xFF) /* HEC was bad */
|
|
#define STATS_GET_BAD_VCI(x) (((x)>>16)&0xFF) /* VCI not open */
|
|
#define STATS_GET_BUF_OVFL(x) (((x)>>24)&0xFF) /* VCC buffer full */
|
|
ServiceStuff_Reg = 0x38, /* Service stuff; bits: */
|
|
#define SSTUFF_SET_SIZE(x) ((x)*0x20000000) /* size of service buffer */
|
|
#define SSTUFF_SET_ADDR(x) ((x)>>8) /* set address of buffer */
|
|
ServWrite_Reg = 0x3C, /* ServWrite Pointer */
|
|
ServRead_Reg = 0x40, /* ServRead Pointer */
|
|
TxDepth_Reg = 0x44, /* FIFO Transmit Depth */
|
|
Butt_Reg = 0x48, /* Butt register */
|
|
CBR_ICG_Reg = 0x50,
|
|
CBR_PTR_Reg = 0x54,
|
|
PingCount_Reg = 0x58, /* Ping count */
|
|
DMA_Addr_Reg = 0x5C /* DMA address */
|
|
};
|
|
|
|
static inline bus_addr_t reg_addr(const struct lanai_dev *lanai,
|
|
enum lanai_register reg)
|
|
{
|
|
return lanai->base + reg;
|
|
}
|
|
|
|
static inline u32 reg_read(const struct lanai_dev *lanai,
|
|
enum lanai_register reg)
|
|
{
|
|
u32 t;
|
|
t = readl(reg_addr(lanai, reg));
|
|
RWDEBUG("R [0x%08X] 0x%02X = 0x%08X\n", (unsigned int) lanai->base,
|
|
(int) reg, t);
|
|
return t;
|
|
}
|
|
|
|
static inline void reg_write(const struct lanai_dev *lanai, u32 val,
|
|
enum lanai_register reg)
|
|
{
|
|
RWDEBUG("W [0x%08X] 0x%02X < 0x%08X\n", (unsigned int) lanai->base,
|
|
(int) reg, val);
|
|
writel(val, reg_addr(lanai, reg));
|
|
}
|
|
|
|
static inline void conf1_write(const struct lanai_dev *lanai)
|
|
{
|
|
reg_write(lanai, lanai->conf1, Config1_Reg);
|
|
}
|
|
|
|
static inline void conf2_write(const struct lanai_dev *lanai)
|
|
{
|
|
reg_write(lanai, lanai->conf2, Config2_Reg);
|
|
}
|
|
|
|
/* Same as conf2_write(), but defers I/O if we're powered down */
|
|
static inline void conf2_write_if_powerup(const struct lanai_dev *lanai)
|
|
{
|
|
#ifdef USE_POWERDOWN
|
|
if (unlikely((lanai->conf1 & CONFIG1_POWERDOWN) != 0))
|
|
return;
|
|
#endif /* USE_POWERDOWN */
|
|
conf2_write(lanai);
|
|
}
|
|
|
|
static inline void reset_board(const struct lanai_dev *lanai)
|
|
{
|
|
DPRINTK("about to reset board\n");
|
|
reg_write(lanai, 0, Reset_Reg);
|
|
/*
|
|
* If we don't delay a little while here then we can end up
|
|
* leaving the card in a VERY weird state and lock up the
|
|
* PCI bus. This isn't documented anywhere but I've convinced
|
|
* myself after a lot of painful experimentation
|
|
*/
|
|
udelay(5);
|
|
}
|
|
|
|
/* -------------------- CARD SRAM UTILITIES: */
|
|
|
|
/* The SRAM is mapped into normal PCI memory space - the only catch is
|
|
* that it is only 16-bits wide but must be accessed as 32-bit. The
|
|
* 16 high bits will be zero. We don't hide this, since they get
|
|
* programmed mostly like discrete registers anyway
|
|
*/
|
|
#define SRAM_START (0x20000)
|
|
#define SRAM_BYTES (0x20000) /* Again, half don't really exist */
|
|
|
|
static inline bus_addr_t sram_addr(const struct lanai_dev *lanai, int offset)
|
|
{
|
|
return lanai->base + SRAM_START + offset;
|
|
}
|
|
|
|
static inline u32 sram_read(const struct lanai_dev *lanai, int offset)
|
|
{
|
|
return readl(sram_addr(lanai, offset));
|
|
}
|
|
|
|
static inline void sram_write(const struct lanai_dev *lanai,
|
|
u32 val, int offset)
|
|
{
|
|
writel(val, sram_addr(lanai, offset));
|
|
}
|
|
|
|
static int __devinit sram_test_word(const struct lanai_dev *lanai,
|
|
int offset, u32 pattern)
|
|
{
|
|
u32 readback;
|
|
sram_write(lanai, pattern, offset);
|
|
readback = sram_read(lanai, offset);
|
|
if (likely(readback == pattern))
|
|
return 0;
|
|
printk(KERN_ERR DEV_LABEL
|
|
"(itf %d): SRAM word at %d bad: wrote 0x%X, read 0x%X\n",
|
|
lanai->number, offset,
|
|
(unsigned int) pattern, (unsigned int) readback);
|
|
return -EIO;
|
|
}
|
|
|
|
static int __devinit sram_test_pass(const struct lanai_dev *lanai, u32 pattern)
|
|
{
|
|
int offset, result = 0;
|
|
for (offset = 0; offset < SRAM_BYTES && result == 0; offset += 4)
|
|
result = sram_test_word(lanai, offset, pattern);
|
|
return result;
|
|
}
|
|
|
|
static int __devinit sram_test_and_clear(const struct lanai_dev *lanai)
|
|
{
|
|
#ifdef FULL_MEMORY_TEST
|
|
int result;
|
|
DPRINTK("testing SRAM\n");
|
|
if ((result = sram_test_pass(lanai, 0x5555)) != 0)
|
|
return result;
|
|
if ((result = sram_test_pass(lanai, 0xAAAA)) != 0)
|
|
return result;
|
|
#endif
|
|
DPRINTK("clearing SRAM\n");
|
|
return sram_test_pass(lanai, 0x0000);
|
|
}
|
|
|
|
/* -------------------- CARD-BASED VCC TABLE UTILITIES: */
|
|
|
|
/* vcc table */
|
|
enum lanai_vcc_offset {
|
|
vcc_rxaddr1 = 0x00, /* Location1, plus bits: */
|
|
#define RXADDR1_SET_SIZE(x) ((x)*0x0000100) /* size of RX buffer */
|
|
#define RXADDR1_SET_RMMODE(x) ((x)*0x00800) /* RM cell action; values: */
|
|
#define RMMODE_TRASH (0) /* discard */
|
|
#define RMMODE_PRESERVE (1) /* input as AAL0 */
|
|
#define RMMODE_PIPE (2) /* pipe to coscheduler */
|
|
#define RMMODE_PIPEALL (3) /* pipe non-RM too */
|
|
#define RXADDR1_OAM_PRESERVE (0x00002000) /* Input OAM cells as AAL0 */
|
|
#define RXADDR1_SET_MODE(x) ((x)*0x0004000) /* Reassembly mode */
|
|
#define RXMODE_TRASH (0) /* discard */
|
|
#define RXMODE_AAL0 (1) /* non-AAL5 mode */
|
|
#define RXMODE_AAL5 (2) /* AAL5, intr. each PDU */
|
|
#define RXMODE_AAL5_STREAM (3) /* AAL5 w/o per-PDU intr */
|
|
vcc_rxaddr2 = 0x04, /* Location2 */
|
|
vcc_rxcrc1 = 0x08, /* RX CRC claculation space */
|
|
vcc_rxcrc2 = 0x0C,
|
|
vcc_rxwriteptr = 0x10, /* RX writeptr, plus bits: */
|
|
#define RXWRITEPTR_LASTEFCI (0x00002000) /* Last PDU had EFCI bit */
|
|
#define RXWRITEPTR_DROPPING (0x00004000) /* Had error, dropping */
|
|
#define RXWRITEPTR_TRASHING (0x00008000) /* Trashing */
|
|
vcc_rxbufstart = 0x14, /* RX bufstart, plus bits: */
|
|
#define RXBUFSTART_CLP (0x00004000)
|
|
#define RXBUFSTART_CI (0x00008000)
|
|
vcc_rxreadptr = 0x18, /* RX readptr */
|
|
vcc_txicg = 0x1C, /* TX ICG */
|
|
vcc_txaddr1 = 0x20, /* Location1, plus bits: */
|
|
#define TXADDR1_SET_SIZE(x) ((x)*0x0000100) /* size of TX buffer */
|
|
#define TXADDR1_ABR (0x00008000) /* use ABR (doesn't work) */
|
|
vcc_txaddr2 = 0x24, /* Location2 */
|
|
vcc_txcrc1 = 0x28, /* TX CRC claculation space */
|
|
vcc_txcrc2 = 0x2C,
|
|
vcc_txreadptr = 0x30, /* TX Readptr, plus bits: */
|
|
#define TXREADPTR_GET_PTR(x) ((x)&0x01FFF)
|
|
#define TXREADPTR_MASK_DELTA (0x0000E000) /* ? */
|
|
vcc_txendptr = 0x34, /* TX Endptr, plus bits: */
|
|
#define TXENDPTR_CLP (0x00002000)
|
|
#define TXENDPTR_MASK_PDUMODE (0x0000C000) /* PDU mode; values: */
|
|
#define PDUMODE_AAL0 (0*0x04000)
|
|
#define PDUMODE_AAL5 (2*0x04000)
|
|
#define PDUMODE_AAL5STREAM (3*0x04000)
|
|
vcc_txwriteptr = 0x38, /* TX Writeptr */
|
|
#define TXWRITEPTR_GET_PTR(x) ((x)&0x1FFF)
|
|
vcc_txcbr_next = 0x3C /* # of next CBR VCI in ring */
|
|
#define TXCBR_NEXT_BOZO (0x00008000) /* "bozo bit" */
|
|
};
|
|
|
|
#define CARDVCC_SIZE (0x40)
|
|
|
|
static inline bus_addr_t cardvcc_addr(const struct lanai_dev *lanai,
|
|
vci_t vci)
|
|
{
|
|
return sram_addr(lanai, vci * CARDVCC_SIZE);
|
|
}
|
|
|
|
static inline u32 cardvcc_read(const struct lanai_vcc *lvcc,
|
|
enum lanai_vcc_offset offset)
|
|
{
|
|
u32 val;
|
|
APRINTK(lvcc->vbase != NULL, "cardvcc_read: unbound vcc!\n");
|
|
val= readl(lvcc->vbase + offset);
|
|
RWDEBUG("VR vci=%04d 0x%02X = 0x%08X\n",
|
|
lvcc->vci, (int) offset, val);
|
|
return val;
|
|
}
|
|
|
|
static inline void cardvcc_write(const struct lanai_vcc *lvcc,
|
|
u32 val, enum lanai_vcc_offset offset)
|
|
{
|
|
APRINTK(lvcc->vbase != NULL, "cardvcc_write: unbound vcc!\n");
|
|
APRINTK((val & ~0xFFFF) == 0,
|
|
"cardvcc_write: bad val 0x%X (vci=%d, addr=0x%02X)\n",
|
|
(unsigned int) val, lvcc->vci, (unsigned int) offset);
|
|
RWDEBUG("VW vci=%04d 0x%02X > 0x%08X\n",
|
|
lvcc->vci, (unsigned int) offset, (unsigned int) val);
|
|
writel(val, lvcc->vbase + offset);
|
|
}
|
|
|
|
/* -------------------- COMPUTE SIZE OF AN AAL5 PDU: */
|
|
|
|
/* How many bytes will an AAL5 PDU take to transmit - remember that:
|
|
* o we need to add 8 bytes for length, CPI, UU, and CRC
|
|
* o we need to round up to 48 bytes for cells
|
|
*/
|
|
static inline int aal5_size(int size)
|
|
{
|
|
int cells = (size + 8 + 47) / 48;
|
|
return cells * 48;
|
|
}
|
|
|
|
/* How many bytes can we send if we have "space" space, assuming we have
|
|
* to send full cells
|
|
*/
|
|
static inline int aal5_spacefor(int space)
|
|
{
|
|
int cells = space / 48;
|
|
return cells * 48;
|
|
}
|
|
|
|
/* -------------------- FREE AN ATM SKB: */
|
|
|
|
static inline void lanai_free_skb(struct atm_vcc *atmvcc, struct sk_buff *skb)
|
|
{
|
|
if (atmvcc->pop != NULL)
|
|
atmvcc->pop(atmvcc, skb);
|
|
else
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
|
|
/* -------------------- TURN VCCS ON AND OFF: */
|
|
|
|
static void host_vcc_start_rx(const struct lanai_vcc *lvcc)
|
|
{
|
|
u32 addr1;
|
|
if (lvcc->rx.atmvcc->qos.aal == ATM_AAL5) {
|
|
dma_addr_t dmaaddr = lvcc->rx.buf.dmaaddr;
|
|
cardvcc_write(lvcc, 0xFFFF, vcc_rxcrc1);
|
|
cardvcc_write(lvcc, 0xFFFF, vcc_rxcrc2);
|
|
cardvcc_write(lvcc, 0, vcc_rxwriteptr);
|
|
cardvcc_write(lvcc, 0, vcc_rxbufstart);
|
|
cardvcc_write(lvcc, 0, vcc_rxreadptr);
|
|
cardvcc_write(lvcc, (dmaaddr >> 16) & 0xFFFF, vcc_rxaddr2);
|
|
addr1 = ((dmaaddr >> 8) & 0xFF) |
|
|
RXADDR1_SET_SIZE(lanai_buf_size_cardorder(&lvcc->rx.buf))|
|
|
RXADDR1_SET_RMMODE(RMMODE_TRASH) | /* ??? */
|
|
/* RXADDR1_OAM_PRESERVE | --- no OAM support yet */
|
|
RXADDR1_SET_MODE(RXMODE_AAL5);
|
|
} else
|
|
addr1 = RXADDR1_SET_RMMODE(RMMODE_PRESERVE) | /* ??? */
|
|
RXADDR1_OAM_PRESERVE | /* ??? */
|
|
RXADDR1_SET_MODE(RXMODE_AAL0);
|
|
/* This one must be last! */
|
|
cardvcc_write(lvcc, addr1, vcc_rxaddr1);
|
|
}
|
|
|
|
static void host_vcc_start_tx(const struct lanai_vcc *lvcc)
|
|
{
|
|
dma_addr_t dmaaddr = lvcc->tx.buf.dmaaddr;
|
|
cardvcc_write(lvcc, 0, vcc_txicg);
|
|
cardvcc_write(lvcc, 0xFFFF, vcc_txcrc1);
|
|
cardvcc_write(lvcc, 0xFFFF, vcc_txcrc2);
|
|
cardvcc_write(lvcc, 0, vcc_txreadptr);
|
|
cardvcc_write(lvcc, 0, vcc_txendptr);
|
|
cardvcc_write(lvcc, 0, vcc_txwriteptr);
|
|
cardvcc_write(lvcc,
|
|
(lvcc->tx.atmvcc->qos.txtp.traffic_class == ATM_CBR) ?
|
|
TXCBR_NEXT_BOZO | lvcc->vci : 0, vcc_txcbr_next);
|
|
cardvcc_write(lvcc, (dmaaddr >> 16) & 0xFFFF, vcc_txaddr2);
|
|
cardvcc_write(lvcc,
|
|
((dmaaddr >> 8) & 0xFF) |
|
|
TXADDR1_SET_SIZE(lanai_buf_size_cardorder(&lvcc->tx.buf)),
|
|
vcc_txaddr1);
|
|
}
|
|
|
|
/* Shutdown receiving on card */
|
|
static void lanai_shutdown_rx_vci(const struct lanai_vcc *lvcc)
|
|
{
|
|
if (lvcc->vbase == NULL) /* We were never bound to a VCI */
|
|
return;
|
|
/* 15.1.1 - set to trashing, wait one cell time (15us) */
|
|
cardvcc_write(lvcc,
|
|
RXADDR1_SET_RMMODE(RMMODE_TRASH) |
|
|
RXADDR1_SET_MODE(RXMODE_TRASH), vcc_rxaddr1);
|
|
udelay(15);
|
|
/* 15.1.2 - clear rest of entries */
|
|
cardvcc_write(lvcc, 0, vcc_rxaddr2);
|
|
cardvcc_write(lvcc, 0, vcc_rxcrc1);
|
|
cardvcc_write(lvcc, 0, vcc_rxcrc2);
|
|
cardvcc_write(lvcc, 0, vcc_rxwriteptr);
|
|
cardvcc_write(lvcc, 0, vcc_rxbufstart);
|
|
cardvcc_write(lvcc, 0, vcc_rxreadptr);
|
|
}
|
|
|
|
/* Shutdown transmitting on card.
|
|
* Unfortunately the lanai needs us to wait until all the data
|
|
* drains out of the buffer before we can dealloc it, so this
|
|
* can take awhile -- up to 370ms for a full 128KB buffer
|
|
* assuming everone else is quiet. In theory the time is
|
|
* boundless if there's a CBR VCC holding things up.
|
|
*/
|
|
static void lanai_shutdown_tx_vci(struct lanai_dev *lanai,
|
|
struct lanai_vcc *lvcc)
|
|
{
|
|
struct sk_buff *skb;
|
|
unsigned long flags, timeout;
|
|
int read, write, lastread = -1;
|
|
APRINTK(!in_interrupt(),
|
|
"lanai_shutdown_tx_vci called w/o process context!\n");
|
|
if (lvcc->vbase == NULL) /* We were never bound to a VCI */
|
|
return;
|
|
/* 15.2.1 - wait for queue to drain */
|
|
while ((skb = skb_dequeue(&lvcc->tx.backlog)) != NULL)
|
|
lanai_free_skb(lvcc->tx.atmvcc, skb);
|
|
read_lock_irqsave(&vcc_sklist_lock, flags);
|
|
__clear_bit(lvcc->vci, lanai->backlog_vccs);
|
|
read_unlock_irqrestore(&vcc_sklist_lock, flags);
|
|
/*
|
|
* We need to wait for the VCC to drain but don't wait forever. We
|
|
* give each 1K of buffer size 1/128th of a second to clear out.
|
|
* TODO: maybe disable CBR if we're about to timeout?
|
|
*/
|
|
timeout = jiffies +
|
|
(((lanai_buf_size(&lvcc->tx.buf) / 1024) * HZ) >> 7);
|
|
write = TXWRITEPTR_GET_PTR(cardvcc_read(lvcc, vcc_txwriteptr));
|
|
for (;;) {
|
|
read = TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr));
|
|
if (read == write && /* Is TX buffer empty? */
|
|
(lvcc->tx.atmvcc->qos.txtp.traffic_class != ATM_CBR ||
|
|
(cardvcc_read(lvcc, vcc_txcbr_next) &
|
|
TXCBR_NEXT_BOZO) == 0))
|
|
break;
|
|
if (read != lastread) { /* Has there been any progress? */
|
|
lastread = read;
|
|
timeout += HZ / 10;
|
|
}
|
|
if (unlikely(time_after(jiffies, timeout))) {
|
|
printk(KERN_ERR DEV_LABEL "(itf %d): Timed out on "
|
|
"backlog closing vci %d\n",
|
|
lvcc->tx.atmvcc->dev->number, lvcc->vci);
|
|
DPRINTK("read, write = %d, %d\n", read, write);
|
|
break;
|
|
}
|
|
msleep(40);
|
|
}
|
|
/* 15.2.2 - clear out all tx registers */
|
|
cardvcc_write(lvcc, 0, vcc_txreadptr);
|
|
cardvcc_write(lvcc, 0, vcc_txwriteptr);
|
|
cardvcc_write(lvcc, 0, vcc_txendptr);
|
|
cardvcc_write(lvcc, 0, vcc_txcrc1);
|
|
cardvcc_write(lvcc, 0, vcc_txcrc2);
|
|
cardvcc_write(lvcc, 0, vcc_txaddr2);
|
|
cardvcc_write(lvcc, 0, vcc_txaddr1);
|
|
}
|
|
|
|
/* -------------------- MANAGING AAL0 RX BUFFER: */
|
|
|
|
static inline int aal0_buffer_allocate(struct lanai_dev *lanai)
|
|
{
|
|
DPRINTK("aal0_buffer_allocate: allocating AAL0 RX buffer\n");
|
|
lanai_buf_allocate(&lanai->aal0buf, AAL0_RX_BUFFER_SIZE, 80,
|
|
lanai->pci);
|
|
return (lanai->aal0buf.start == NULL) ? -ENOMEM : 0;
|
|
}
|
|
|
|
static inline void aal0_buffer_free(struct lanai_dev *lanai)
|
|
{
|
|
DPRINTK("aal0_buffer_allocate: freeing AAL0 RX buffer\n");
|
|
lanai_buf_deallocate(&lanai->aal0buf, lanai->pci);
|
|
}
|
|
|
|
/* -------------------- EEPROM UTILITIES: */
|
|
|
|
/* Offsets of data in the EEPROM */
|
|
#define EEPROM_COPYRIGHT (0)
|
|
#define EEPROM_COPYRIGHT_LEN (44)
|
|
#define EEPROM_CHECKSUM (62)
|
|
#define EEPROM_CHECKSUM_REV (63)
|
|
#define EEPROM_MAC (64)
|
|
#define EEPROM_MAC_REV (70)
|
|
#define EEPROM_SERIAL (112)
|
|
#define EEPROM_SERIAL_REV (116)
|
|
#define EEPROM_MAGIC (120)
|
|
#define EEPROM_MAGIC_REV (124)
|
|
|
|
#define EEPROM_MAGIC_VALUE (0x5AB478D2)
|
|
|
|
#ifndef READ_EEPROM
|
|
|
|
/* Stub functions to use if EEPROM reading is disabled */
|
|
static int __devinit eeprom_read(struct lanai_dev *lanai)
|
|
{
|
|
printk(KERN_INFO DEV_LABEL "(itf %d): *NOT* reading EEPROM\n",
|
|
lanai->number);
|
|
memset(&lanai->eeprom[EEPROM_MAC], 0, 6);
|
|
return 0;
|
|
}
|
|
|
|
static int __devinit eeprom_validate(struct lanai_dev *lanai)
|
|
{
|
|
lanai->serialno = 0;
|
|
lanai->magicno = EEPROM_MAGIC_VALUE;
|
|
return 0;
|
|
}
|
|
|
|
#else /* READ_EEPROM */
|
|
|
|
static int __devinit eeprom_read(struct lanai_dev *lanai)
|
|
{
|
|
int i, address;
|
|
u8 data;
|
|
u32 tmp;
|
|
#define set_config1(x) do { lanai->conf1 = x; conf1_write(lanai); \
|
|
} while (0)
|
|
#define clock_h() set_config1(lanai->conf1 | CONFIG1_PROMCLK)
|
|
#define clock_l() set_config1(lanai->conf1 &~ CONFIG1_PROMCLK)
|
|
#define data_h() set_config1(lanai->conf1 | CONFIG1_PROMDATA)
|
|
#define data_l() set_config1(lanai->conf1 &~ CONFIG1_PROMDATA)
|
|
#define pre_read() do { data_h(); clock_h(); udelay(5); } while (0)
|
|
#define read_pin() (reg_read(lanai, Status_Reg) & STATUS_PROMDATA)
|
|
#define send_stop() do { data_l(); udelay(5); clock_h(); udelay(5); \
|
|
data_h(); udelay(5); } while (0)
|
|
/* start with both clock and data high */
|
|
data_h(); clock_h(); udelay(5);
|
|
for (address = 0; address < LANAI_EEPROM_SIZE; address++) {
|
|
data = (address << 1) | 1; /* Command=read + address */
|
|
/* send start bit */
|
|
data_l(); udelay(5);
|
|
clock_l(); udelay(5);
|
|
for (i = 128; i != 0; i >>= 1) { /* write command out */
|
|
tmp = (lanai->conf1 & ~CONFIG1_PROMDATA) |
|
|
(data & i) ? CONFIG1_PROMDATA : 0;
|
|
if (lanai->conf1 != tmp) {
|
|
set_config1(tmp);
|
|
udelay(5); /* Let new data settle */
|
|
}
|
|
clock_h(); udelay(5); clock_l(); udelay(5);
|
|
}
|
|
/* look for ack */
|
|
data_h(); clock_h(); udelay(5);
|
|
if (read_pin() != 0)
|
|
goto error; /* No ack seen */
|
|
clock_l(); udelay(5);
|
|
/* read back result */
|
|
for (data = 0, i = 7; i >= 0; i--) {
|
|
data_h(); clock_h(); udelay(5);
|
|
data = (data << 1) | !!read_pin();
|
|
clock_l(); udelay(5);
|
|
}
|
|
/* look again for ack */
|
|
data_h(); clock_h(); udelay(5);
|
|
if (read_pin() == 0)
|
|
goto error; /* Spurious ack */
|
|
clock_l(); udelay(5);
|
|
send_stop();
|
|
lanai->eeprom[address] = data;
|
|
DPRINTK("EEPROM 0x%04X %02X\n",
|
|
(unsigned int) address, (unsigned int) data);
|
|
}
|
|
return 0;
|
|
error:
|
|
clock_l(); udelay(5); /* finish read */
|
|
send_stop();
|
|
printk(KERN_ERR DEV_LABEL "(itf %d): error reading EEPROM byte %d\n",
|
|
lanai->number, address);
|
|
return -EIO;
|
|
#undef set_config1
|
|
#undef clock_h
|
|
#undef clock_l
|
|
#undef data_h
|
|
#undef data_l
|
|
#undef pre_read
|
|
#undef read_pin
|
|
#undef send_stop
|
|
}
|
|
|
|
/* read a big-endian 4-byte value out of eeprom */
|
|
static inline u32 eeprom_be4(const struct lanai_dev *lanai, int address)
|
|
{
|
|
return be32_to_cpup((const u32 *) &lanai->eeprom[address]);
|
|
}
|
|
|
|
/* Checksum/validate EEPROM contents */
|
|
static int __devinit eeprom_validate(struct lanai_dev *lanai)
|
|
{
|
|
int i, s;
|
|
u32 v;
|
|
const u8 *e = lanai->eeprom;
|
|
#ifdef DEBUG
|
|
/* First, see if we can get an ASCIIZ string out of the copyright */
|
|
for (i = EEPROM_COPYRIGHT;
|
|
i < (EEPROM_COPYRIGHT + EEPROM_COPYRIGHT_LEN); i++)
|
|
if (e[i] < 0x20 || e[i] > 0x7E)
|
|
break;
|
|
if ( i != EEPROM_COPYRIGHT &&
|
|
i != EEPROM_COPYRIGHT + EEPROM_COPYRIGHT_LEN && e[i] == '\0')
|
|
DPRINTK("eeprom: copyright = \"%s\"\n",
|
|
(char *) &e[EEPROM_COPYRIGHT]);
|
|
else
|
|
DPRINTK("eeprom: copyright not found\n");
|
|
#endif
|
|
/* Validate checksum */
|
|
for (i = s = 0; i < EEPROM_CHECKSUM; i++)
|
|
s += e[i];
|
|
s &= 0xFF;
|
|
if (s != e[EEPROM_CHECKSUM]) {
|
|
printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM checksum bad "
|
|
"(wanted 0x%02X, got 0x%02X)\n", lanai->number,
|
|
(unsigned int) s, (unsigned int) e[EEPROM_CHECKSUM]);
|
|
return -EIO;
|
|
}
|
|
s ^= 0xFF;
|
|
if (s != e[EEPROM_CHECKSUM_REV]) {
|
|
printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM inverse checksum "
|
|
"bad (wanted 0x%02X, got 0x%02X)\n", lanai->number,
|
|
(unsigned int) s, (unsigned int) e[EEPROM_CHECKSUM_REV]);
|
|
return -EIO;
|
|
}
|
|
/* Verify MAC address */
|
|
for (i = 0; i < 6; i++)
|
|
if ((e[EEPROM_MAC + i] ^ e[EEPROM_MAC_REV + i]) != 0xFF) {
|
|
printk(KERN_ERR DEV_LABEL
|
|
"(itf %d) : EEPROM MAC addresses don't match "
|
|
"(0x%02X, inverse 0x%02X)\n", lanai->number,
|
|
(unsigned int) e[EEPROM_MAC + i],
|
|
(unsigned int) e[EEPROM_MAC_REV + i]);
|
|
return -EIO;
|
|
}
|
|
DPRINTK("eeprom: MAC address = %02X:%02X:%02X:%02X:%02X:%02X\n",
|
|
e[EEPROM_MAC + 0], e[EEPROM_MAC + 1], e[EEPROM_MAC + 2],
|
|
e[EEPROM_MAC + 3], e[EEPROM_MAC + 4], e[EEPROM_MAC + 5]);
|
|
/* Verify serial number */
|
|
lanai->serialno = eeprom_be4(lanai, EEPROM_SERIAL);
|
|
v = eeprom_be4(lanai, EEPROM_SERIAL_REV);
|
|
if ((lanai->serialno ^ v) != 0xFFFFFFFF) {
|
|
printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM serial numbers "
|
|
"don't match (0x%08X, inverse 0x%08X)\n", lanai->number,
|
|
(unsigned int) lanai->serialno, (unsigned int) v);
|
|
return -EIO;
|
|
}
|
|
DPRINTK("eeprom: Serial number = %d\n", (unsigned int) lanai->serialno);
|
|
/* Verify magic number */
|
|
lanai->magicno = eeprom_be4(lanai, EEPROM_MAGIC);
|
|
v = eeprom_be4(lanai, EEPROM_MAGIC_REV);
|
|
if ((lanai->magicno ^ v) != 0xFFFFFFFF) {
|
|
printk(KERN_ERR DEV_LABEL "(itf %d): EEPROM magic numbers "
|
|
"don't match (0x%08X, inverse 0x%08X)\n", lanai->number,
|
|
lanai->magicno, v);
|
|
return -EIO;
|
|
}
|
|
DPRINTK("eeprom: Magic number = 0x%08X\n", lanai->magicno);
|
|
if (lanai->magicno != EEPROM_MAGIC_VALUE)
|
|
printk(KERN_WARNING DEV_LABEL "(itf %d): warning - EEPROM "
|
|
"magic not what expected (got 0x%08X, not 0x%08X)\n",
|
|
lanai->number, (unsigned int) lanai->magicno,
|
|
(unsigned int) EEPROM_MAGIC_VALUE);
|
|
return 0;
|
|
}
|
|
|
|
#endif /* READ_EEPROM */
|
|
|
|
static inline const u8 *eeprom_mac(const struct lanai_dev *lanai)
|
|
{
|
|
return &lanai->eeprom[EEPROM_MAC];
|
|
}
|
|
|
|
/* -------------------- INTERRUPT HANDLING UTILITIES: */
|
|
|
|
/* Interrupt types */
|
|
#define INT_STATS (0x00000002) /* Statistics counter overflow */
|
|
#define INT_SOOL (0x00000004) /* SOOL changed state */
|
|
#define INT_LOCD (0x00000008) /* LOCD changed state */
|
|
#define INT_LED (0x00000010) /* LED (HAPPI) changed state */
|
|
#define INT_GPIN (0x00000020) /* GPIN changed state */
|
|
#define INT_PING (0x00000040) /* PING_COUNT fulfilled */
|
|
#define INT_WAKE (0x00000080) /* Lanai wants bus */
|
|
#define INT_CBR0 (0x00000100) /* CBR sched hit VCI 0 */
|
|
#define INT_LOCK (0x00000200) /* Service list overflow */
|
|
#define INT_MISMATCH (0x00000400) /* TX magic list mismatch */
|
|
#define INT_AAL0_STR (0x00000800) /* Non-AAL5 buffer half filled */
|
|
#define INT_AAL0 (0x00001000) /* Non-AAL5 data available */
|
|
#define INT_SERVICE (0x00002000) /* Service list entries available */
|
|
#define INT_TABORTSENT (0x00004000) /* Target abort sent by lanai */
|
|
#define INT_TABORTBM (0x00008000) /* Abort rcv'd as bus master */
|
|
#define INT_TIMEOUTBM (0x00010000) /* No response to bus master */
|
|
#define INT_PCIPARITY (0x00020000) /* Parity error on PCI */
|
|
|
|
/* Sets of the above */
|
|
#define INT_ALL (0x0003FFFE) /* All interrupts */
|
|
#define INT_STATUS (0x0000003C) /* Some status pin changed */
|
|
#define INT_DMASHUT (0x00038000) /* DMA engine got shut down */
|
|
#define INT_SEGSHUT (0x00000700) /* Segmentation got shut down */
|
|
|
|
static inline u32 intr_pending(const struct lanai_dev *lanai)
|
|
{
|
|
return reg_read(lanai, IntStatusMasked_Reg);
|
|
}
|
|
|
|
static inline void intr_enable(const struct lanai_dev *lanai, u32 i)
|
|
{
|
|
reg_write(lanai, i, IntControlEna_Reg);
|
|
}
|
|
|
|
static inline void intr_disable(const struct lanai_dev *lanai, u32 i)
|
|
{
|
|
reg_write(lanai, i, IntControlDis_Reg);
|
|
}
|
|
|
|
/* -------------------- CARD/PCI STATUS: */
|
|
|
|
static void status_message(int itf, const char *name, int status)
|
|
{
|
|
static const char *onoff[2] = { "off to on", "on to off" };
|
|
printk(KERN_INFO DEV_LABEL "(itf %d): %s changed from %s\n",
|
|
itf, name, onoff[!status]);
|
|
}
|
|
|
|
static void lanai_check_status(struct lanai_dev *lanai)
|
|
{
|
|
u32 new = reg_read(lanai, Status_Reg);
|
|
u32 changes = new ^ lanai->status;
|
|
lanai->status = new;
|
|
#define e(flag, name) \
|
|
if (changes & flag) \
|
|
status_message(lanai->number, name, new & flag)
|
|
e(STATUS_SOOL, "SOOL");
|
|
e(STATUS_LOCD, "LOCD");
|
|
e(STATUS_LED, "LED");
|
|
e(STATUS_GPIN, "GPIN");
|
|
#undef e
|
|
}
|
|
|
|
static void pcistatus_got(int itf, const char *name)
|
|
{
|
|
printk(KERN_INFO DEV_LABEL "(itf %d): PCI got %s error\n", itf, name);
|
|
}
|
|
|
|
static void pcistatus_check(struct lanai_dev *lanai, int clearonly)
|
|
{
|
|
u16 s;
|
|
int result;
|
|
result = pci_read_config_word(lanai->pci, PCI_STATUS, &s);
|
|
if (result != PCIBIOS_SUCCESSFUL) {
|
|
printk(KERN_ERR DEV_LABEL "(itf %d): can't read PCI_STATUS: "
|
|
"%d\n", lanai->number, result);
|
|
return;
|
|
}
|
|
s &= PCI_STATUS_DETECTED_PARITY | PCI_STATUS_SIG_SYSTEM_ERROR |
|
|
PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT |
|
|
PCI_STATUS_SIG_TARGET_ABORT | PCI_STATUS_PARITY;
|
|
if (s == 0)
|
|
return;
|
|
result = pci_write_config_word(lanai->pci, PCI_STATUS, s);
|
|
if (result != PCIBIOS_SUCCESSFUL)
|
|
printk(KERN_ERR DEV_LABEL "(itf %d): can't write PCI_STATUS: "
|
|
"%d\n", lanai->number, result);
|
|
if (clearonly)
|
|
return;
|
|
#define e(flag, name, stat) \
|
|
if (s & flag) { \
|
|
pcistatus_got(lanai->number, name); \
|
|
++lanai->stats.pcierr_##stat; \
|
|
}
|
|
e(PCI_STATUS_DETECTED_PARITY, "parity", parity_detect);
|
|
e(PCI_STATUS_SIG_SYSTEM_ERROR, "signalled system", serr_set);
|
|
e(PCI_STATUS_REC_MASTER_ABORT, "master", master_abort);
|
|
e(PCI_STATUS_REC_TARGET_ABORT, "master target", m_target_abort);
|
|
e(PCI_STATUS_SIG_TARGET_ABORT, "slave", s_target_abort);
|
|
e(PCI_STATUS_PARITY, "master parity", master_parity);
|
|
#undef e
|
|
}
|
|
|
|
/* -------------------- VCC TX BUFFER UTILITIES: */
|
|
|
|
/* space left in tx buffer in bytes */
|
|
static inline int vcc_tx_space(const struct lanai_vcc *lvcc, int endptr)
|
|
{
|
|
int r;
|
|
r = endptr * 16;
|
|
r -= ((unsigned long) lvcc->tx.buf.ptr) -
|
|
((unsigned long) lvcc->tx.buf.start);
|
|
r -= 16; /* Leave "bubble" - if start==end it looks empty */
|
|
if (r < 0)
|
|
r += lanai_buf_size(&lvcc->tx.buf);
|
|
return r;
|
|
}
|
|
|
|
/* test if VCC is currently backlogged */
|
|
static inline int vcc_is_backlogged(const struct lanai_vcc *lvcc)
|
|
{
|
|
return !skb_queue_empty(&lvcc->tx.backlog);
|
|
}
|
|
|
|
/* Bit fields in the segmentation buffer descriptor */
|
|
#define DESCRIPTOR_MAGIC (0xD0000000)
|
|
#define DESCRIPTOR_AAL5 (0x00008000)
|
|
#define DESCRIPTOR_AAL5_STREAM (0x00004000)
|
|
#define DESCRIPTOR_CLP (0x00002000)
|
|
|
|
/* Add 32-bit descriptor with its padding */
|
|
static inline void vcc_tx_add_aal5_descriptor(struct lanai_vcc *lvcc,
|
|
u32 flags, int len)
|
|
{
|
|
int pos;
|
|
APRINTK((((unsigned long) lvcc->tx.buf.ptr) & 15) == 0,
|
|
"vcc_tx_add_aal5_descriptor: bad ptr=%p\n", lvcc->tx.buf.ptr);
|
|
lvcc->tx.buf.ptr += 4; /* Hope the values REALLY don't matter */
|
|
pos = ((unsigned char *) lvcc->tx.buf.ptr) -
|
|
(unsigned char *) lvcc->tx.buf.start;
|
|
APRINTK((pos & ~0x0001FFF0) == 0,
|
|
"vcc_tx_add_aal5_descriptor: bad pos (%d) before, vci=%d, "
|
|
"start,ptr,end=%p,%p,%p\n", pos, lvcc->vci,
|
|
lvcc->tx.buf.start, lvcc->tx.buf.ptr, lvcc->tx.buf.end);
|
|
pos = (pos + len) & (lanai_buf_size(&lvcc->tx.buf) - 1);
|
|
APRINTK((pos & ~0x0001FFF0) == 0,
|
|
"vcc_tx_add_aal5_descriptor: bad pos (%d) after, vci=%d, "
|
|
"start,ptr,end=%p,%p,%p\n", pos, lvcc->vci,
|
|
lvcc->tx.buf.start, lvcc->tx.buf.ptr, lvcc->tx.buf.end);
|
|
lvcc->tx.buf.ptr[-1] =
|
|
cpu_to_le32(DESCRIPTOR_MAGIC | DESCRIPTOR_AAL5 |
|
|
((lvcc->tx.atmvcc->atm_options & ATM_ATMOPT_CLP) ?
|
|
DESCRIPTOR_CLP : 0) | flags | pos >> 4);
|
|
if (lvcc->tx.buf.ptr >= lvcc->tx.buf.end)
|
|
lvcc->tx.buf.ptr = lvcc->tx.buf.start;
|
|
}
|
|
|
|
/* Add 32-bit AAL5 trailer and leave room for its CRC */
|
|
static inline void vcc_tx_add_aal5_trailer(struct lanai_vcc *lvcc,
|
|
int len, int cpi, int uu)
|
|
{
|
|
APRINTK((((unsigned long) lvcc->tx.buf.ptr) & 15) == 8,
|
|
"vcc_tx_add_aal5_trailer: bad ptr=%p\n", lvcc->tx.buf.ptr);
|
|
lvcc->tx.buf.ptr += 2;
|
|
lvcc->tx.buf.ptr[-2] = cpu_to_be32((uu << 24) | (cpi << 16) | len);
|
|
if (lvcc->tx.buf.ptr >= lvcc->tx.buf.end)
|
|
lvcc->tx.buf.ptr = lvcc->tx.buf.start;
|
|
}
|
|
|
|
static inline void vcc_tx_memcpy(struct lanai_vcc *lvcc,
|
|
const unsigned char *src, int n)
|
|
{
|
|
unsigned char *e;
|
|
int m;
|
|
e = ((unsigned char *) lvcc->tx.buf.ptr) + n;
|
|
m = e - (unsigned char *) lvcc->tx.buf.end;
|
|
if (m < 0)
|
|
m = 0;
|
|
memcpy(lvcc->tx.buf.ptr, src, n - m);
|
|
if (m != 0) {
|
|
memcpy(lvcc->tx.buf.start, src + n - m, m);
|
|
e = ((unsigned char *) lvcc->tx.buf.start) + m;
|
|
}
|
|
lvcc->tx.buf.ptr = (u32 *) e;
|
|
}
|
|
|
|
static inline void vcc_tx_memzero(struct lanai_vcc *lvcc, int n)
|
|
{
|
|
unsigned char *e;
|
|
int m;
|
|
if (n == 0)
|
|
return;
|
|
e = ((unsigned char *) lvcc->tx.buf.ptr) + n;
|
|
m = e - (unsigned char *) lvcc->tx.buf.end;
|
|
if (m < 0)
|
|
m = 0;
|
|
memset(lvcc->tx.buf.ptr, 0, n - m);
|
|
if (m != 0) {
|
|
memset(lvcc->tx.buf.start, 0, m);
|
|
e = ((unsigned char *) lvcc->tx.buf.start) + m;
|
|
}
|
|
lvcc->tx.buf.ptr = (u32 *) e;
|
|
}
|
|
|
|
/* Update "butt" register to specify new WritePtr */
|
|
static inline void lanai_endtx(struct lanai_dev *lanai,
|
|
const struct lanai_vcc *lvcc)
|
|
{
|
|
int i, ptr = ((unsigned char *) lvcc->tx.buf.ptr) -
|
|
(unsigned char *) lvcc->tx.buf.start;
|
|
APRINTK((ptr & ~0x0001FFF0) == 0,
|
|
"lanai_endtx: bad ptr (%d), vci=%d, start,ptr,end=%p,%p,%p\n",
|
|
ptr, lvcc->vci, lvcc->tx.buf.start, lvcc->tx.buf.ptr,
|
|
lvcc->tx.buf.end);
|
|
|
|
/*
|
|
* Since the "butt register" is a shared resounce on the card we
|
|
* serialize all accesses to it through this spinlock. This is
|
|
* mostly just paranoia sicne the register is rarely "busy" anyway
|
|
* but is needed for correctness.
|
|
*/
|
|
spin_lock(&lanai->endtxlock);
|
|
/*
|
|
* We need to check if the "butt busy" bit is set before
|
|
* updating the butt register. In theory this should
|
|
* never happen because the ATM card is plenty fast at
|
|
* updating the register. Still, we should make sure
|
|
*/
|
|
for (i = 0; reg_read(lanai, Status_Reg) & STATUS_BUTTBUSY; i++) {
|
|
if (unlikely(i > 50)) {
|
|
printk(KERN_ERR DEV_LABEL "(itf %d): butt register "
|
|
"always busy!\n", lanai->number);
|
|
break;
|
|
}
|
|
udelay(5);
|
|
}
|
|
/*
|
|
* Before we tall the card to start work we need to be sure 100% of
|
|
* the info in the service buffer has been written before we tell
|
|
* the card about it
|
|
*/
|
|
wmb();
|
|
reg_write(lanai, (ptr << 12) | lvcc->vci, Butt_Reg);
|
|
spin_unlock(&lanai->endtxlock);
|
|
}
|
|
|
|
/*
|
|
* Add one AAL5 PDU to lvcc's transmit buffer. Caller garauntees there's
|
|
* space available. "pdusize" is the number of bytes the PDU will take
|
|
*/
|
|
static void lanai_send_one_aal5(struct lanai_dev *lanai,
|
|
struct lanai_vcc *lvcc, struct sk_buff *skb, int pdusize)
|
|
{
|
|
int pad;
|
|
APRINTK(pdusize == aal5_size(skb->len),
|
|
"lanai_send_one_aal5: wrong size packet (%d != %d)\n",
|
|
pdusize, aal5_size(skb->len));
|
|
vcc_tx_add_aal5_descriptor(lvcc, 0, pdusize);
|
|
pad = pdusize - skb->len - 8;
|
|
APRINTK(pad >= 0, "pad is negative (%d)\n", pad);
|
|
APRINTK(pad < 48, "pad is too big (%d)\n", pad);
|
|
vcc_tx_memcpy(lvcc, skb->data, skb->len);
|
|
vcc_tx_memzero(lvcc, pad);
|
|
vcc_tx_add_aal5_trailer(lvcc, skb->len, 0, 0);
|
|
lanai_endtx(lanai, lvcc);
|
|
lanai_free_skb(lvcc->tx.atmvcc, skb);
|
|
atomic_inc(&lvcc->tx.atmvcc->stats->tx);
|
|
}
|
|
|
|
/* Try to fill the buffer - don't call unless there is backlog */
|
|
static void vcc_tx_unqueue_aal5(struct lanai_dev *lanai,
|
|
struct lanai_vcc *lvcc, int endptr)
|
|
{
|
|
int n;
|
|
struct sk_buff *skb;
|
|
int space = vcc_tx_space(lvcc, endptr);
|
|
APRINTK(vcc_is_backlogged(lvcc),
|
|
"vcc_tx_unqueue() called with empty backlog (vci=%d)\n",
|
|
lvcc->vci);
|
|
while (space >= 64) {
|
|
skb = skb_dequeue(&lvcc->tx.backlog);
|
|
if (skb == NULL)
|
|
goto no_backlog;
|
|
n = aal5_size(skb->len);
|
|
if (n + 16 > space) {
|
|
/* No room for this packet - put it back on queue */
|
|
skb_queue_head(&lvcc->tx.backlog, skb);
|
|
return;
|
|
}
|
|
lanai_send_one_aal5(lanai, lvcc, skb, n);
|
|
space -= n + 16;
|
|
}
|
|
if (!vcc_is_backlogged(lvcc)) {
|
|
no_backlog:
|
|
__clear_bit(lvcc->vci, lanai->backlog_vccs);
|
|
}
|
|
}
|
|
|
|
/* Given an skb that we want to transmit either send it now or queue */
|
|
static void vcc_tx_aal5(struct lanai_dev *lanai, struct lanai_vcc *lvcc,
|
|
struct sk_buff *skb)
|
|
{
|
|
int space, n;
|
|
if (vcc_is_backlogged(lvcc)) /* Already backlogged */
|
|
goto queue_it;
|
|
space = vcc_tx_space(lvcc,
|
|
TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr)));
|
|
n = aal5_size(skb->len);
|
|
APRINTK(n + 16 >= 64, "vcc_tx_aal5: n too small (%d)\n", n);
|
|
if (space < n + 16) { /* No space for this PDU */
|
|
__set_bit(lvcc->vci, lanai->backlog_vccs);
|
|
queue_it:
|
|
skb_queue_tail(&lvcc->tx.backlog, skb);
|
|
return;
|
|
}
|
|
lanai_send_one_aal5(lanai, lvcc, skb, n);
|
|
}
|
|
|
|
static void vcc_tx_unqueue_aal0(struct lanai_dev *lanai,
|
|
struct lanai_vcc *lvcc, int endptr)
|
|
{
|
|
printk(KERN_INFO DEV_LABEL
|
|
": vcc_tx_unqueue_aal0: not implemented\n");
|
|
}
|
|
|
|
static void vcc_tx_aal0(struct lanai_dev *lanai, struct lanai_vcc *lvcc,
|
|
struct sk_buff *skb)
|
|
{
|
|
printk(KERN_INFO DEV_LABEL ": vcc_tx_aal0: not implemented\n");
|
|
/* Remember to increment lvcc->tx.atmvcc->stats->tx */
|
|
lanai_free_skb(lvcc->tx.atmvcc, skb);
|
|
}
|
|
|
|
/* -------------------- VCC RX BUFFER UTILITIES: */
|
|
|
|
/* unlike the _tx_ cousins, this doesn't update ptr */
|
|
static inline void vcc_rx_memcpy(unsigned char *dest,
|
|
const struct lanai_vcc *lvcc, int n)
|
|
{
|
|
int m = ((const unsigned char *) lvcc->rx.buf.ptr) + n -
|
|
((const unsigned char *) (lvcc->rx.buf.end));
|
|
if (m < 0)
|
|
m = 0;
|
|
memcpy(dest, lvcc->rx.buf.ptr, n - m);
|
|
memcpy(dest + n - m, lvcc->rx.buf.start, m);
|
|
/* Make sure that these copies don't get reordered */
|
|
barrier();
|
|
}
|
|
|
|
/* Receive AAL5 data on a VCC with a particular endptr */
|
|
static void vcc_rx_aal5(struct lanai_vcc *lvcc, int endptr)
|
|
{
|
|
int size;
|
|
struct sk_buff *skb;
|
|
const u32 *x;
|
|
u32 *end = &lvcc->rx.buf.start[endptr * 4];
|
|
int n = ((unsigned long) end) - ((unsigned long) lvcc->rx.buf.ptr);
|
|
if (n < 0)
|
|
n += lanai_buf_size(&lvcc->rx.buf);
|
|
APRINTK(n >= 0 && n < lanai_buf_size(&lvcc->rx.buf) && !(n & 15),
|
|
"vcc_rx_aal5: n out of range (%d/%Zu)\n",
|
|
n, lanai_buf_size(&lvcc->rx.buf));
|
|
/* Recover the second-to-last word to get true pdu length */
|
|
if ((x = &end[-2]) < lvcc->rx.buf.start)
|
|
x = &lvcc->rx.buf.end[-2];
|
|
/*
|
|
* Before we actually read from the buffer, make sure the memory
|
|
* changes have arrived
|
|
*/
|
|
rmb();
|
|
size = be32_to_cpup(x) & 0xffff;
|
|
if (unlikely(n != aal5_size(size))) {
|
|
/* Make sure size matches padding */
|
|
printk(KERN_INFO DEV_LABEL "(itf %d): Got bad AAL5 length "
|
|
"on vci=%d - size=%d n=%d\n",
|
|
lvcc->rx.atmvcc->dev->number, lvcc->vci, size, n);
|
|
lvcc->stats.x.aal5.rx_badlen++;
|
|
goto out;
|
|
}
|
|
skb = atm_alloc_charge(lvcc->rx.atmvcc, size, GFP_ATOMIC);
|
|
if (unlikely(skb == NULL)) {
|
|
lvcc->stats.rx_nomem++;
|
|
goto out;
|
|
}
|
|
skb_put(skb, size);
|
|
vcc_rx_memcpy(skb->data, lvcc, size);
|
|
ATM_SKB(skb)->vcc = lvcc->rx.atmvcc;
|
|
__net_timestamp(skb);
|
|
lvcc->rx.atmvcc->push(lvcc->rx.atmvcc, skb);
|
|
atomic_inc(&lvcc->rx.atmvcc->stats->rx);
|
|
out:
|
|
lvcc->rx.buf.ptr = end;
|
|
cardvcc_write(lvcc, endptr, vcc_rxreadptr);
|
|
}
|
|
|
|
static void vcc_rx_aal0(struct lanai_dev *lanai)
|
|
{
|
|
printk(KERN_INFO DEV_LABEL ": vcc_rx_aal0: not implemented\n");
|
|
/* Remember to get read_lock(&vcc_sklist_lock) while looking up VC */
|
|
/* Remember to increment lvcc->rx.atmvcc->stats->rx */
|
|
}
|
|
|
|
/* -------------------- MANAGING HOST-BASED VCC TABLE: */
|
|
|
|
/* Decide whether to use vmalloc or get_zeroed_page for VCC table */
|
|
#if (NUM_VCI * BITS_PER_LONG) <= PAGE_SIZE
|
|
#define VCCTABLE_GETFREEPAGE
|
|
#else
|
|
#include <linux/vmalloc.h>
|
|
#endif
|
|
|
|
static int __devinit vcc_table_allocate(struct lanai_dev *lanai)
|
|
{
|
|
#ifdef VCCTABLE_GETFREEPAGE
|
|
APRINTK((lanai->num_vci) * sizeof(struct lanai_vcc *) <= PAGE_SIZE,
|
|
"vcc table > PAGE_SIZE!");
|
|
lanai->vccs = (struct lanai_vcc **) get_zeroed_page(GFP_KERNEL);
|
|
return (lanai->vccs == NULL) ? -ENOMEM : 0;
|
|
#else
|
|
int bytes = (lanai->num_vci) * sizeof(struct lanai_vcc *);
|
|
lanai->vccs = (struct lanai_vcc **) vmalloc(bytes);
|
|
if (unlikely(lanai->vccs == NULL))
|
|
return -ENOMEM;
|
|
memset(lanai->vccs, 0, bytes);
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
static inline void vcc_table_deallocate(const struct lanai_dev *lanai)
|
|
{
|
|
#ifdef VCCTABLE_GETFREEPAGE
|
|
free_page((unsigned long) lanai->vccs);
|
|
#else
|
|
vfree(lanai->vccs);
|
|
#endif
|
|
}
|
|
|
|
/* Allocate a fresh lanai_vcc, with the appropriate things cleared */
|
|
static inline struct lanai_vcc *new_lanai_vcc(void)
|
|
{
|
|
struct lanai_vcc *lvcc;
|
|
lvcc = kzalloc(sizeof(*lvcc), GFP_KERNEL);
|
|
if (likely(lvcc != NULL)) {
|
|
skb_queue_head_init(&lvcc->tx.backlog);
|
|
#ifdef DEBUG
|
|
lvcc->vci = -1;
|
|
#endif
|
|
}
|
|
return lvcc;
|
|
}
|
|
|
|
static int lanai_get_sized_buffer(struct lanai_dev *lanai,
|
|
struct lanai_buffer *buf, int max_sdu, int multiplier,
|
|
const char *name)
|
|
{
|
|
int size;
|
|
if (unlikely(max_sdu < 1))
|
|
max_sdu = 1;
|
|
max_sdu = aal5_size(max_sdu);
|
|
size = (max_sdu + 16) * multiplier + 16;
|
|
lanai_buf_allocate(buf, size, max_sdu + 32, lanai->pci);
|
|
if (unlikely(buf->start == NULL))
|
|
return -ENOMEM;
|
|
if (unlikely(lanai_buf_size(buf) < size))
|
|
printk(KERN_WARNING DEV_LABEL "(itf %d): wanted %d bytes "
|
|
"for %s buffer, got only %Zu\n", lanai->number, size,
|
|
name, lanai_buf_size(buf));
|
|
DPRINTK("Allocated %Zu byte %s buffer\n", lanai_buf_size(buf), name);
|
|
return 0;
|
|
}
|
|
|
|
/* Setup a RX buffer for a currently unbound AAL5 vci */
|
|
static inline int lanai_setup_rx_vci_aal5(struct lanai_dev *lanai,
|
|
struct lanai_vcc *lvcc, const struct atm_qos *qos)
|
|
{
|
|
return lanai_get_sized_buffer(lanai, &lvcc->rx.buf,
|
|
qos->rxtp.max_sdu, AAL5_RX_MULTIPLIER, "RX");
|
|
}
|
|
|
|
/* Setup a TX buffer for a currently unbound AAL5 vci */
|
|
static int lanai_setup_tx_vci(struct lanai_dev *lanai, struct lanai_vcc *lvcc,
|
|
const struct atm_qos *qos)
|
|
{
|
|
int max_sdu, multiplier;
|
|
if (qos->aal == ATM_AAL0) {
|
|
lvcc->tx.unqueue = vcc_tx_unqueue_aal0;
|
|
max_sdu = ATM_CELL_SIZE - 1;
|
|
multiplier = AAL0_TX_MULTIPLIER;
|
|
} else {
|
|
lvcc->tx.unqueue = vcc_tx_unqueue_aal5;
|
|
max_sdu = qos->txtp.max_sdu;
|
|
multiplier = AAL5_TX_MULTIPLIER;
|
|
}
|
|
return lanai_get_sized_buffer(lanai, &lvcc->tx.buf, max_sdu,
|
|
multiplier, "TX");
|
|
}
|
|
|
|
static inline void host_vcc_bind(struct lanai_dev *lanai,
|
|
struct lanai_vcc *lvcc, vci_t vci)
|
|
{
|
|
if (lvcc->vbase != NULL)
|
|
return; /* We already were bound in the other direction */
|
|
DPRINTK("Binding vci %d\n", vci);
|
|
#ifdef USE_POWERDOWN
|
|
if (lanai->nbound++ == 0) {
|
|
DPRINTK("Coming out of powerdown\n");
|
|
lanai->conf1 &= ~CONFIG1_POWERDOWN;
|
|
conf1_write(lanai);
|
|
conf2_write(lanai);
|
|
}
|
|
#endif
|
|
lvcc->vbase = cardvcc_addr(lanai, vci);
|
|
lanai->vccs[lvcc->vci = vci] = lvcc;
|
|
}
|
|
|
|
static inline void host_vcc_unbind(struct lanai_dev *lanai,
|
|
struct lanai_vcc *lvcc)
|
|
{
|
|
if (lvcc->vbase == NULL)
|
|
return; /* This vcc was never bound */
|
|
DPRINTK("Unbinding vci %d\n", lvcc->vci);
|
|
lvcc->vbase = NULL;
|
|
lanai->vccs[lvcc->vci] = NULL;
|
|
#ifdef USE_POWERDOWN
|
|
if (--lanai->nbound == 0) {
|
|
DPRINTK("Going into powerdown\n");
|
|
lanai->conf1 |= CONFIG1_POWERDOWN;
|
|
conf1_write(lanai);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/* -------------------- RESET CARD: */
|
|
|
|
static void lanai_reset(struct lanai_dev *lanai)
|
|
{
|
|
printk(KERN_CRIT DEV_LABEL "(itf %d): *NOT* reseting - not "
|
|
"implemented\n", lanai->number);
|
|
/* TODO */
|
|
/* The following is just a hack until we write the real
|
|
* resetter - at least ack whatever interrupt sent us
|
|
* here
|
|
*/
|
|
reg_write(lanai, INT_ALL, IntAck_Reg);
|
|
lanai->stats.card_reset++;
|
|
}
|
|
|
|
/* -------------------- SERVICE LIST UTILITIES: */
|
|
|
|
/*
|
|
* Allocate service buffer and tell card about it
|
|
*/
|
|
static int __devinit service_buffer_allocate(struct lanai_dev *lanai)
|
|
{
|
|
lanai_buf_allocate(&lanai->service, SERVICE_ENTRIES * 4, 8,
|
|
lanai->pci);
|
|
if (unlikely(lanai->service.start == NULL))
|
|
return -ENOMEM;
|
|
DPRINTK("allocated service buffer at 0x%08lX, size %Zu(%d)\n",
|
|
(unsigned long) lanai->service.start,
|
|
lanai_buf_size(&lanai->service),
|
|
lanai_buf_size_cardorder(&lanai->service));
|
|
/* Clear ServWrite register to be safe */
|
|
reg_write(lanai, 0, ServWrite_Reg);
|
|
/* ServiceStuff register contains size and address of buffer */
|
|
reg_write(lanai,
|
|
SSTUFF_SET_SIZE(lanai_buf_size_cardorder(&lanai->service)) |
|
|
SSTUFF_SET_ADDR(lanai->service.dmaaddr),
|
|
ServiceStuff_Reg);
|
|
return 0;
|
|
}
|
|
|
|
static inline void service_buffer_deallocate(struct lanai_dev *lanai)
|
|
{
|
|
lanai_buf_deallocate(&lanai->service, lanai->pci);
|
|
}
|
|
|
|
/* Bitfields in service list */
|
|
#define SERVICE_TX (0x80000000) /* Was from transmission */
|
|
#define SERVICE_TRASH (0x40000000) /* RXed PDU was trashed */
|
|
#define SERVICE_CRCERR (0x20000000) /* RXed PDU had CRC error */
|
|
#define SERVICE_CI (0x10000000) /* RXed PDU had CI set */
|
|
#define SERVICE_CLP (0x08000000) /* RXed PDU had CLP set */
|
|
#define SERVICE_STREAM (0x04000000) /* RX Stream mode */
|
|
#define SERVICE_GET_VCI(x) (((x)>>16)&0x3FF)
|
|
#define SERVICE_GET_END(x) ((x)&0x1FFF)
|
|
|
|
/* Handle one thing from the service list - returns true if it marked a
|
|
* VCC ready for xmit
|
|
*/
|
|
static int handle_service(struct lanai_dev *lanai, u32 s)
|
|
{
|
|
vci_t vci = SERVICE_GET_VCI(s);
|
|
struct lanai_vcc *lvcc;
|
|
read_lock(&vcc_sklist_lock);
|
|
lvcc = lanai->vccs[vci];
|
|
if (unlikely(lvcc == NULL)) {
|
|
read_unlock(&vcc_sklist_lock);
|
|
DPRINTK("(itf %d) got service entry 0x%X for nonexistent "
|
|
"vcc %d\n", lanai->number, (unsigned int) s, vci);
|
|
if (s & SERVICE_TX)
|
|
lanai->stats.service_notx++;
|
|
else
|
|
lanai->stats.service_norx++;
|
|
return 0;
|
|
}
|
|
if (s & SERVICE_TX) { /* segmentation interrupt */
|
|
if (unlikely(lvcc->tx.atmvcc == NULL)) {
|
|
read_unlock(&vcc_sklist_lock);
|
|
DPRINTK("(itf %d) got service entry 0x%X for non-TX "
|
|
"vcc %d\n", lanai->number, (unsigned int) s, vci);
|
|
lanai->stats.service_notx++;
|
|
return 0;
|
|
}
|
|
__set_bit(vci, lanai->transmit_ready);
|
|
lvcc->tx.endptr = SERVICE_GET_END(s);
|
|
read_unlock(&vcc_sklist_lock);
|
|
return 1;
|
|
}
|
|
if (unlikely(lvcc->rx.atmvcc == NULL)) {
|
|
read_unlock(&vcc_sklist_lock);
|
|
DPRINTK("(itf %d) got service entry 0x%X for non-RX "
|
|
"vcc %d\n", lanai->number, (unsigned int) s, vci);
|
|
lanai->stats.service_norx++;
|
|
return 0;
|
|
}
|
|
if (unlikely(lvcc->rx.atmvcc->qos.aal != ATM_AAL5)) {
|
|
read_unlock(&vcc_sklist_lock);
|
|
DPRINTK("(itf %d) got RX service entry 0x%X for non-AAL5 "
|
|
"vcc %d\n", lanai->number, (unsigned int) s, vci);
|
|
lanai->stats.service_rxnotaal5++;
|
|
atomic_inc(&lvcc->rx.atmvcc->stats->rx_err);
|
|
return 0;
|
|
}
|
|
if (likely(!(s & (SERVICE_TRASH | SERVICE_STREAM | SERVICE_CRCERR)))) {
|
|
vcc_rx_aal5(lvcc, SERVICE_GET_END(s));
|
|
read_unlock(&vcc_sklist_lock);
|
|
return 0;
|
|
}
|
|
if (s & SERVICE_TRASH) {
|
|
int bytes;
|
|
read_unlock(&vcc_sklist_lock);
|
|
DPRINTK("got trashed rx pdu on vci %d\n", vci);
|
|
atomic_inc(&lvcc->rx.atmvcc->stats->rx_err);
|
|
lvcc->stats.x.aal5.service_trash++;
|
|
bytes = (SERVICE_GET_END(s) * 16) -
|
|
(((unsigned long) lvcc->rx.buf.ptr) -
|
|
((unsigned long) lvcc->rx.buf.start)) + 47;
|
|
if (bytes < 0)
|
|
bytes += lanai_buf_size(&lvcc->rx.buf);
|
|
lanai->stats.ovfl_trash += (bytes / 48);
|
|
return 0;
|
|
}
|
|
if (s & SERVICE_STREAM) {
|
|
read_unlock(&vcc_sklist_lock);
|
|
atomic_inc(&lvcc->rx.atmvcc->stats->rx_err);
|
|
lvcc->stats.x.aal5.service_stream++;
|
|
printk(KERN_ERR DEV_LABEL "(itf %d): Got AAL5 stream "
|
|
"PDU on VCI %d!\n", lanai->number, vci);
|
|
lanai_reset(lanai);
|
|
return 0;
|
|
}
|
|
DPRINTK("got rx crc error on vci %d\n", vci);
|
|
atomic_inc(&lvcc->rx.atmvcc->stats->rx_err);
|
|
lvcc->stats.x.aal5.service_rxcrc++;
|
|
lvcc->rx.buf.ptr = &lvcc->rx.buf.start[SERVICE_GET_END(s) * 4];
|
|
cardvcc_write(lvcc, SERVICE_GET_END(s), vcc_rxreadptr);
|
|
read_unlock(&vcc_sklist_lock);
|
|
return 0;
|
|
}
|
|
|
|
/* Try transmitting on all VCIs that we marked ready to serve */
|
|
static void iter_transmit(struct lanai_dev *lanai, vci_t vci)
|
|
{
|
|
struct lanai_vcc *lvcc = lanai->vccs[vci];
|
|
if (vcc_is_backlogged(lvcc))
|
|
lvcc->tx.unqueue(lanai, lvcc, lvcc->tx.endptr);
|
|
}
|
|
|
|
/* Run service queue -- called from interrupt context or with
|
|
* interrupts otherwise disabled and with the lanai->servicelock
|
|
* lock held
|
|
*/
|
|
static void run_service(struct lanai_dev *lanai)
|
|
{
|
|
int ntx = 0;
|
|
u32 wreg = reg_read(lanai, ServWrite_Reg);
|
|
const u32 *end = lanai->service.start + wreg;
|
|
while (lanai->service.ptr != end) {
|
|
ntx += handle_service(lanai,
|
|
le32_to_cpup(lanai->service.ptr++));
|
|
if (lanai->service.ptr >= lanai->service.end)
|
|
lanai->service.ptr = lanai->service.start;
|
|
}
|
|
reg_write(lanai, wreg, ServRead_Reg);
|
|
if (ntx != 0) {
|
|
read_lock(&vcc_sklist_lock);
|
|
vci_bitfield_iterate(lanai, lanai->transmit_ready,
|
|
iter_transmit);
|
|
bitmap_zero(lanai->transmit_ready, NUM_VCI);
|
|
read_unlock(&vcc_sklist_lock);
|
|
}
|
|
}
|
|
|
|
/* -------------------- GATHER STATISTICS: */
|
|
|
|
static void get_statistics(struct lanai_dev *lanai)
|
|
{
|
|
u32 statreg = reg_read(lanai, Statistics_Reg);
|
|
lanai->stats.atm_ovfl += STATS_GET_FIFO_OVFL(statreg);
|
|
lanai->stats.hec_err += STATS_GET_HEC_ERR(statreg);
|
|
lanai->stats.vci_trash += STATS_GET_BAD_VCI(statreg);
|
|
lanai->stats.ovfl_trash += STATS_GET_BUF_OVFL(statreg);
|
|
}
|
|
|
|
/* -------------------- POLLING TIMER: */
|
|
|
|
#ifndef DEBUG_RW
|
|
/* Try to undequeue 1 backlogged vcc */
|
|
static void iter_dequeue(struct lanai_dev *lanai, vci_t vci)
|
|
{
|
|
struct lanai_vcc *lvcc = lanai->vccs[vci];
|
|
int endptr;
|
|
if (lvcc == NULL || lvcc->tx.atmvcc == NULL ||
|
|
!vcc_is_backlogged(lvcc)) {
|
|
__clear_bit(vci, lanai->backlog_vccs);
|
|
return;
|
|
}
|
|
endptr = TXREADPTR_GET_PTR(cardvcc_read(lvcc, vcc_txreadptr));
|
|
lvcc->tx.unqueue(lanai, lvcc, endptr);
|
|
}
|
|
#endif /* !DEBUG_RW */
|
|
|
|
static void lanai_timed_poll(unsigned long arg)
|
|
{
|
|
struct lanai_dev *lanai = (struct lanai_dev *) arg;
|
|
#ifndef DEBUG_RW
|
|
unsigned long flags;
|
|
#ifdef USE_POWERDOWN
|
|
if (lanai->conf1 & CONFIG1_POWERDOWN)
|
|
return;
|
|
#endif /* USE_POWERDOWN */
|
|
local_irq_save(flags);
|
|
/* If we can grab the spinlock, check if any services need to be run */
|
|
if (spin_trylock(&lanai->servicelock)) {
|
|
run_service(lanai);
|
|
spin_unlock(&lanai->servicelock);
|
|
}
|
|
/* ...and see if any backlogged VCs can make progress */
|
|
/* unfortunately linux has no read_trylock() currently */
|
|
read_lock(&vcc_sklist_lock);
|
|
vci_bitfield_iterate(lanai, lanai->backlog_vccs, iter_dequeue);
|
|
read_unlock(&vcc_sklist_lock);
|
|
local_irq_restore(flags);
|
|
|
|
get_statistics(lanai);
|
|
#endif /* !DEBUG_RW */
|
|
mod_timer(&lanai->timer, jiffies + LANAI_POLL_PERIOD);
|
|
}
|
|
|
|
static inline void lanai_timed_poll_start(struct lanai_dev *lanai)
|
|
{
|
|
init_timer(&lanai->timer);
|
|
lanai->timer.expires = jiffies + LANAI_POLL_PERIOD;
|
|
lanai->timer.data = (unsigned long) lanai;
|
|
lanai->timer.function = lanai_timed_poll;
|
|
add_timer(&lanai->timer);
|
|
}
|
|
|
|
static inline void lanai_timed_poll_stop(struct lanai_dev *lanai)
|
|
{
|
|
del_timer_sync(&lanai->timer);
|
|
}
|
|
|
|
/* -------------------- INTERRUPT SERVICE: */
|
|
|
|
static inline void lanai_int_1(struct lanai_dev *lanai, u32 reason)
|
|
{
|
|
u32 ack = 0;
|
|
if (reason & INT_SERVICE) {
|
|
ack = INT_SERVICE;
|
|
spin_lock(&lanai->servicelock);
|
|
run_service(lanai);
|
|
spin_unlock(&lanai->servicelock);
|
|
}
|
|
if (reason & (INT_AAL0_STR | INT_AAL0)) {
|
|
ack |= reason & (INT_AAL0_STR | INT_AAL0);
|
|
vcc_rx_aal0(lanai);
|
|
}
|
|
/* The rest of the interrupts are pretty rare */
|
|
if (ack == reason)
|
|
goto done;
|
|
if (reason & INT_STATS) {
|
|
reason &= ~INT_STATS; /* No need to ack */
|
|
get_statistics(lanai);
|
|
}
|
|
if (reason & INT_STATUS) {
|
|
ack |= reason & INT_STATUS;
|
|
lanai_check_status(lanai);
|
|
}
|
|
if (unlikely(reason & INT_DMASHUT)) {
|
|
printk(KERN_ERR DEV_LABEL "(itf %d): driver error - DMA "
|
|
"shutdown, reason=0x%08X, address=0x%08X\n",
|
|
lanai->number, (unsigned int) (reason & INT_DMASHUT),
|
|
(unsigned int) reg_read(lanai, DMA_Addr_Reg));
|
|
if (reason & INT_TABORTBM) {
|
|
lanai_reset(lanai);
|
|
return;
|
|
}
|
|
ack |= (reason & INT_DMASHUT);
|
|
printk(KERN_ERR DEV_LABEL "(itf %d): re-enabling DMA\n",
|
|
lanai->number);
|
|
conf1_write(lanai);
|
|
lanai->stats.dma_reenable++;
|
|
pcistatus_check(lanai, 0);
|
|
}
|
|
if (unlikely(reason & INT_TABORTSENT)) {
|
|
ack |= (reason & INT_TABORTSENT);
|
|
printk(KERN_ERR DEV_LABEL "(itf %d): sent PCI target abort\n",
|
|
lanai->number);
|
|
pcistatus_check(lanai, 0);
|
|
}
|
|
if (unlikely(reason & INT_SEGSHUT)) {
|
|
printk(KERN_ERR DEV_LABEL "(itf %d): driver error - "
|
|
"segmentation shutdown, reason=0x%08X\n", lanai->number,
|
|
(unsigned int) (reason & INT_SEGSHUT));
|
|
lanai_reset(lanai);
|
|
return;
|
|
}
|
|
if (unlikely(reason & (INT_PING | INT_WAKE))) {
|
|
printk(KERN_ERR DEV_LABEL "(itf %d): driver error - "
|
|
"unexpected interrupt 0x%08X, resetting\n",
|
|
lanai->number,
|
|
(unsigned int) (reason & (INT_PING | INT_WAKE)));
|
|
lanai_reset(lanai);
|
|
return;
|
|
}
|
|
#ifdef DEBUG
|
|
if (unlikely(ack != reason)) {
|
|
DPRINTK("unacked ints: 0x%08X\n",
|
|
(unsigned int) (reason & ~ack));
|
|
ack = reason;
|
|
}
|
|
#endif
|
|
done:
|
|
if (ack != 0)
|
|
reg_write(lanai, ack, IntAck_Reg);
|
|
}
|
|
|
|
static irqreturn_t lanai_int(int irq, void *devid)
|
|
{
|
|
struct lanai_dev *lanai = devid;
|
|
u32 reason;
|
|
|
|
#ifdef USE_POWERDOWN
|
|
/*
|
|
* If we're powered down we shouldn't be generating any interrupts -
|
|
* so assume that this is a shared interrupt line and it's for someone
|
|
* else
|
|
*/
|
|
if (unlikely(lanai->conf1 & CONFIG1_POWERDOWN))
|
|
return IRQ_NONE;
|
|
#endif
|
|
|
|
reason = intr_pending(lanai);
|
|
if (reason == 0)
|
|
return IRQ_NONE; /* Must be for someone else */
|
|
|
|
do {
|
|
if (unlikely(reason == 0xFFFFFFFF))
|
|
break; /* Maybe we've been unplugged? */
|
|
lanai_int_1(lanai, reason);
|
|
reason = intr_pending(lanai);
|
|
} while (reason != 0);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* TODO - it would be nice if we could use the "delayed interrupt" system
|
|
* to some advantage
|
|
*/
|
|
|
|
/* -------------------- CHECK BOARD ID/REV: */
|
|
|
|
/*
|
|
* The board id and revision are stored both in the reset register and
|
|
* in the PCI configuration space - the documentation says to check
|
|
* each of them. If revp!=NULL we store the revision there
|
|
*/
|
|
static int check_board_id_and_rev(const char *name, u32 val, int *revp)
|
|
{
|
|
DPRINTK("%s says board_id=%d, board_rev=%d\n", name,
|
|
(int) RESET_GET_BOARD_ID(val),
|
|
(int) RESET_GET_BOARD_REV(val));
|
|
if (RESET_GET_BOARD_ID(val) != BOARD_ID_LANAI256) {
|
|
printk(KERN_ERR DEV_LABEL ": Found %s board-id %d -- not a "
|
|
"Lanai 25.6\n", name, (int) RESET_GET_BOARD_ID(val));
|
|
return -ENODEV;
|
|
}
|
|
if (revp != NULL)
|
|
*revp = RESET_GET_BOARD_REV(val);
|
|
return 0;
|
|
}
|
|
|
|
/* -------------------- PCI INITIALIZATION/SHUTDOWN: */
|
|
|
|
static int __devinit lanai_pci_start(struct lanai_dev *lanai)
|
|
{
|
|
struct pci_dev *pci = lanai->pci;
|
|
int result;
|
|
u16 w;
|
|
|
|
if (pci_enable_device(pci) != 0) {
|
|
printk(KERN_ERR DEV_LABEL "(itf %d): can't enable "
|
|
"PCI device", lanai->number);
|
|
return -ENXIO;
|
|
}
|
|
pci_set_master(pci);
|
|
if (pci_set_dma_mask(pci, DMA_32BIT_MASK) != 0) {
|
|
printk(KERN_WARNING DEV_LABEL
|
|
"(itf %d): No suitable DMA available.\n", lanai->number);
|
|
return -EBUSY;
|
|
}
|
|
if (pci_set_consistent_dma_mask(pci, DMA_32BIT_MASK) != 0) {
|
|
printk(KERN_WARNING DEV_LABEL
|
|
"(itf %d): No suitable DMA available.\n", lanai->number);
|
|
return -EBUSY;
|
|
}
|
|
result = pci_read_config_word(pci, PCI_SUBSYSTEM_ID, &w);
|
|
if (result != PCIBIOS_SUCCESSFUL) {
|
|
printk(KERN_ERR DEV_LABEL "(itf %d): can't read "
|
|
"PCI_SUBSYSTEM_ID: %d\n", lanai->number, result);
|
|
return -EINVAL;
|
|
}
|
|
result = check_board_id_and_rev("PCI", w, NULL);
|
|
if (result != 0)
|
|
return result;
|
|
/* Set latency timer to zero as per lanai docs */
|
|
result = pci_write_config_byte(pci, PCI_LATENCY_TIMER, 0);
|
|
if (result != PCIBIOS_SUCCESSFUL) {
|
|
printk(KERN_ERR DEV_LABEL "(itf %d): can't write "
|
|
"PCI_LATENCY_TIMER: %d\n", lanai->number, result);
|
|
return -EINVAL;
|
|
}
|
|
pcistatus_check(lanai, 1);
|
|
pcistatus_check(lanai, 0);
|
|
return 0;
|
|
}
|
|
|
|
/* -------------------- VPI/VCI ALLOCATION: */
|
|
|
|
/*
|
|
* We _can_ use VCI==0 for normal traffic, but only for UBR (or we'll
|
|
* get a CBRZERO interrupt), and we can use it only if noone is receiving
|
|
* AAL0 traffic (since they will use the same queue) - according to the
|
|
* docs we shouldn't even use it for AAL0 traffic
|
|
*/
|
|
static inline int vci0_is_ok(struct lanai_dev *lanai,
|
|
const struct atm_qos *qos)
|
|
{
|
|
if (qos->txtp.traffic_class == ATM_CBR || qos->aal == ATM_AAL0)
|
|
return 0;
|
|
if (qos->rxtp.traffic_class != ATM_NONE) {
|
|
if (lanai->naal0 != 0)
|
|
return 0;
|
|
lanai->conf2 |= CONFIG2_VCI0_NORMAL;
|
|
conf2_write_if_powerup(lanai);
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/* return true if vci is currently unused, or if requested qos is
|
|
* compatible
|
|
*/
|
|
static int vci_is_ok(struct lanai_dev *lanai, vci_t vci,
|
|
const struct atm_vcc *atmvcc)
|
|
{
|
|
const struct atm_qos *qos = &atmvcc->qos;
|
|
const struct lanai_vcc *lvcc = lanai->vccs[vci];
|
|
if (vci == 0 && !vci0_is_ok(lanai, qos))
|
|
return 0;
|
|
if (unlikely(lvcc != NULL)) {
|
|
if (qos->rxtp.traffic_class != ATM_NONE &&
|
|
lvcc->rx.atmvcc != NULL && lvcc->rx.atmvcc != atmvcc)
|
|
return 0;
|
|
if (qos->txtp.traffic_class != ATM_NONE &&
|
|
lvcc->tx.atmvcc != NULL && lvcc->tx.atmvcc != atmvcc)
|
|
return 0;
|
|
if (qos->txtp.traffic_class == ATM_CBR &&
|
|
lanai->cbrvcc != NULL && lanai->cbrvcc != atmvcc)
|
|
return 0;
|
|
}
|
|
if (qos->aal == ATM_AAL0 && lanai->naal0 == 0 &&
|
|
qos->rxtp.traffic_class != ATM_NONE) {
|
|
const struct lanai_vcc *vci0 = lanai->vccs[0];
|
|
if (vci0 != NULL && vci0->rx.atmvcc != NULL)
|
|
return 0;
|
|
lanai->conf2 &= ~CONFIG2_VCI0_NORMAL;
|
|
conf2_write_if_powerup(lanai);
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static int lanai_normalize_ci(struct lanai_dev *lanai,
|
|
const struct atm_vcc *atmvcc, short *vpip, vci_t *vcip)
|
|
{
|
|
switch (*vpip) {
|
|
case ATM_VPI_ANY:
|
|
*vpip = 0;
|
|
/* FALLTHROUGH */
|
|
case 0:
|
|
break;
|
|
default:
|
|
return -EADDRINUSE;
|
|
}
|
|
switch (*vcip) {
|
|
case ATM_VCI_ANY:
|
|
for (*vcip = ATM_NOT_RSV_VCI; *vcip < lanai->num_vci;
|
|
(*vcip)++)
|
|
if (vci_is_ok(lanai, *vcip, atmvcc))
|
|
return 0;
|
|
return -EADDRINUSE;
|
|
default:
|
|
if (*vcip >= lanai->num_vci || *vcip < 0 ||
|
|
!vci_is_ok(lanai, *vcip, atmvcc))
|
|
return -EADDRINUSE;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* -------------------- MANAGE CBR: */
|
|
|
|
/*
|
|
* CBR ICG is stored as a fixed-point number with 4 fractional bits.
|
|
* Note that storing a number greater than 2046.0 will result in
|
|
* incorrect shaping
|
|
*/
|
|
#define CBRICG_FRAC_BITS (4)
|
|
#define CBRICG_MAX (2046 << CBRICG_FRAC_BITS)
|
|
|
|
/*
|
|
* ICG is related to PCR with the formula PCR = MAXPCR / (ICG + 1)
|
|
* where MAXPCR is (according to the docs) 25600000/(54*8),
|
|
* which is equal to (3125<<9)/27.
|
|
*
|
|
* Solving for ICG, we get:
|
|
* ICG = MAXPCR/PCR - 1
|
|
* ICG = (3125<<9)/(27*PCR) - 1
|
|
* ICG = ((3125<<9) - (27*PCR)) / (27*PCR)
|
|
*
|
|
* The end result is supposed to be a fixed-point number with FRAC_BITS
|
|
* bits of a fractional part, so we keep everything in the numerator
|
|
* shifted by that much as we compute
|
|
*
|
|
*/
|
|
static int pcr_to_cbricg(const struct atm_qos *qos)
|
|
{
|
|
int rounddown = 0; /* 1 = Round PCR down, i.e. round ICG _up_ */
|
|
int x, icg, pcr = atm_pcr_goal(&qos->txtp);
|
|
if (pcr == 0) /* Use maximum bandwidth */
|
|
return 0;
|
|
if (pcr < 0) {
|
|
rounddown = 1;
|
|
pcr = -pcr;
|
|
}
|
|
x = pcr * 27;
|
|
icg = (3125 << (9 + CBRICG_FRAC_BITS)) - (x << CBRICG_FRAC_BITS);
|
|
if (rounddown)
|
|
icg += x - 1;
|
|
icg /= x;
|
|
if (icg > CBRICG_MAX)
|
|
icg = CBRICG_MAX;
|
|
DPRINTK("pcr_to_cbricg: pcr=%d rounddown=%c icg=%d\n",
|
|
pcr, rounddown ? 'Y' : 'N', icg);
|
|
return icg;
|
|
}
|
|
|
|
static inline void lanai_cbr_setup(struct lanai_dev *lanai)
|
|
{
|
|
reg_write(lanai, pcr_to_cbricg(&lanai->cbrvcc->qos), CBR_ICG_Reg);
|
|
reg_write(lanai, lanai->cbrvcc->vci, CBR_PTR_Reg);
|
|
lanai->conf2 |= CONFIG2_CBR_ENABLE;
|
|
conf2_write(lanai);
|
|
}
|
|
|
|
static inline void lanai_cbr_shutdown(struct lanai_dev *lanai)
|
|
{
|
|
lanai->conf2 &= ~CONFIG2_CBR_ENABLE;
|
|
conf2_write(lanai);
|
|
}
|
|
|
|
/* -------------------- OPERATIONS: */
|
|
|
|
/* setup a newly detected device */
|
|
static int __devinit lanai_dev_open(struct atm_dev *atmdev)
|
|
{
|
|
struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data;
|
|
unsigned long raw_base;
|
|
int result;
|
|
|
|
DPRINTK("In lanai_dev_open()\n");
|
|
/* Basic device fields */
|
|
lanai->number = atmdev->number;
|
|
lanai->num_vci = NUM_VCI;
|
|
bitmap_zero(lanai->backlog_vccs, NUM_VCI);
|
|
bitmap_zero(lanai->transmit_ready, NUM_VCI);
|
|
lanai->naal0 = 0;
|
|
#ifdef USE_POWERDOWN
|
|
lanai->nbound = 0;
|
|
#endif
|
|
lanai->cbrvcc = NULL;
|
|
memset(&lanai->stats, 0, sizeof lanai->stats);
|
|
spin_lock_init(&lanai->endtxlock);
|
|
spin_lock_init(&lanai->servicelock);
|
|
atmdev->ci_range.vpi_bits = 0;
|
|
atmdev->ci_range.vci_bits = 0;
|
|
while (1 << atmdev->ci_range.vci_bits < lanai->num_vci)
|
|
atmdev->ci_range.vci_bits++;
|
|
atmdev->link_rate = ATM_25_PCR;
|
|
|
|
/* 3.2: PCI initialization */
|
|
if ((result = lanai_pci_start(lanai)) != 0)
|
|
goto error;
|
|
raw_base = lanai->pci->resource[0].start;
|
|
lanai->base = (bus_addr_t) ioremap(raw_base, LANAI_MAPPING_SIZE);
|
|
if (lanai->base == NULL) {
|
|
printk(KERN_ERR DEV_LABEL ": couldn't remap I/O space\n");
|
|
goto error_pci;
|
|
}
|
|
/* 3.3: Reset lanai and PHY */
|
|
reset_board(lanai);
|
|
lanai->conf1 = reg_read(lanai, Config1_Reg);
|
|
lanai->conf1 &= ~(CONFIG1_GPOUT1 | CONFIG1_POWERDOWN |
|
|
CONFIG1_MASK_LEDMODE);
|
|
lanai->conf1 |= CONFIG1_SET_LEDMODE(LEDMODE_NOT_SOOL);
|
|
reg_write(lanai, lanai->conf1 | CONFIG1_GPOUT1, Config1_Reg);
|
|
udelay(1000);
|
|
conf1_write(lanai);
|
|
|
|
/*
|
|
* 3.4: Turn on endian mode for big-endian hardware
|
|
* We don't actually want to do this - the actual bit fields
|
|
* in the endian register are not documented anywhere.
|
|
* Instead we do the bit-flipping ourselves on big-endian
|
|
* hardware.
|
|
*
|
|
* 3.5: get the board ID/rev by reading the reset register
|
|
*/
|
|
result = check_board_id_and_rev("register",
|
|
reg_read(lanai, Reset_Reg), &lanai->board_rev);
|
|
if (result != 0)
|
|
goto error_unmap;
|
|
|
|
/* 3.6: read EEPROM */
|
|
if ((result = eeprom_read(lanai)) != 0)
|
|
goto error_unmap;
|
|
if ((result = eeprom_validate(lanai)) != 0)
|
|
goto error_unmap;
|
|
|
|
/* 3.7: re-reset PHY, do loopback tests, setup PHY */
|
|
reg_write(lanai, lanai->conf1 | CONFIG1_GPOUT1, Config1_Reg);
|
|
udelay(1000);
|
|
conf1_write(lanai);
|
|
/* TODO - loopback tests */
|
|
lanai->conf1 |= (CONFIG1_GPOUT2 | CONFIG1_GPOUT3 | CONFIG1_DMA_ENABLE);
|
|
conf1_write(lanai);
|
|
|
|
/* 3.8/3.9: test and initialize card SRAM */
|
|
if ((result = sram_test_and_clear(lanai)) != 0)
|
|
goto error_unmap;
|
|
|
|
/* 3.10: initialize lanai registers */
|
|
lanai->conf1 |= CONFIG1_DMA_ENABLE;
|
|
conf1_write(lanai);
|
|
if ((result = service_buffer_allocate(lanai)) != 0)
|
|
goto error_unmap;
|
|
if ((result = vcc_table_allocate(lanai)) != 0)
|
|
goto error_service;
|
|
lanai->conf2 = (lanai->num_vci >= 512 ? CONFIG2_HOWMANY : 0) |
|
|
CONFIG2_HEC_DROP | /* ??? */ CONFIG2_PTI7_MODE;
|
|
conf2_write(lanai);
|
|
reg_write(lanai, TX_FIFO_DEPTH, TxDepth_Reg);
|
|
reg_write(lanai, 0, CBR_ICG_Reg); /* CBR defaults to no limit */
|
|
if ((result = request_irq(lanai->pci->irq, lanai_int, IRQF_SHARED,
|
|
DEV_LABEL, lanai)) != 0) {
|
|
printk(KERN_ERR DEV_LABEL ": can't allocate interrupt\n");
|
|
goto error_vcctable;
|
|
}
|
|
mb(); /* Make sure that all that made it */
|
|
intr_enable(lanai, INT_ALL & ~(INT_PING | INT_WAKE));
|
|
/* 3.11: initialize loop mode (i.e. turn looping off) */
|
|
lanai->conf1 = (lanai->conf1 & ~CONFIG1_MASK_LOOPMODE) |
|
|
CONFIG1_SET_LOOPMODE(LOOPMODE_NORMAL) |
|
|
CONFIG1_GPOUT2 | CONFIG1_GPOUT3;
|
|
conf1_write(lanai);
|
|
lanai->status = reg_read(lanai, Status_Reg);
|
|
/* We're now done initializing this card */
|
|
#ifdef USE_POWERDOWN
|
|
lanai->conf1 |= CONFIG1_POWERDOWN;
|
|
conf1_write(lanai);
|
|
#endif
|
|
memcpy(atmdev->esi, eeprom_mac(lanai), ESI_LEN);
|
|
lanai_timed_poll_start(lanai);
|
|
printk(KERN_NOTICE DEV_LABEL "(itf %d): rev.%d, base=0x%lx, irq=%u "
|
|
"(%02X-%02X-%02X-%02X-%02X-%02X)\n", lanai->number,
|
|
(int) lanai->pci->revision, (unsigned long) lanai->base,
|
|
lanai->pci->irq,
|
|
atmdev->esi[0], atmdev->esi[1], atmdev->esi[2],
|
|
atmdev->esi[3], atmdev->esi[4], atmdev->esi[5]);
|
|
printk(KERN_NOTICE DEV_LABEL "(itf %d): LANAI%s, serialno=%u(0x%X), "
|
|
"board_rev=%d\n", lanai->number,
|
|
lanai->type==lanai2 ? "2" : "HB", (unsigned int) lanai->serialno,
|
|
(unsigned int) lanai->serialno, lanai->board_rev);
|
|
return 0;
|
|
|
|
error_vcctable:
|
|
vcc_table_deallocate(lanai);
|
|
error_service:
|
|
service_buffer_deallocate(lanai);
|
|
error_unmap:
|
|
reset_board(lanai);
|
|
#ifdef USE_POWERDOWN
|
|
lanai->conf1 = reg_read(lanai, Config1_Reg) | CONFIG1_POWERDOWN;
|
|
conf1_write(lanai);
|
|
#endif
|
|
iounmap(lanai->base);
|
|
error_pci:
|
|
pci_disable_device(lanai->pci);
|
|
error:
|
|
return result;
|
|
}
|
|
|
|
/* called when device is being shutdown, and all vcc's are gone - higher
|
|
* levels will deallocate the atm device for us
|
|
*/
|
|
static void lanai_dev_close(struct atm_dev *atmdev)
|
|
{
|
|
struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data;
|
|
printk(KERN_INFO DEV_LABEL "(itf %d): shutting down interface\n",
|
|
lanai->number);
|
|
lanai_timed_poll_stop(lanai);
|
|
#ifdef USE_POWERDOWN
|
|
lanai->conf1 = reg_read(lanai, Config1_Reg) & ~CONFIG1_POWERDOWN;
|
|
conf1_write(lanai);
|
|
#endif
|
|
intr_disable(lanai, INT_ALL);
|
|
free_irq(lanai->pci->irq, lanai);
|
|
reset_board(lanai);
|
|
#ifdef USE_POWERDOWN
|
|
lanai->conf1 |= CONFIG1_POWERDOWN;
|
|
conf1_write(lanai);
|
|
#endif
|
|
pci_disable_device(lanai->pci);
|
|
vcc_table_deallocate(lanai);
|
|
service_buffer_deallocate(lanai);
|
|
iounmap(lanai->base);
|
|
kfree(lanai);
|
|
}
|
|
|
|
/* close a vcc */
|
|
static void lanai_close(struct atm_vcc *atmvcc)
|
|
{
|
|
struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data;
|
|
struct lanai_dev *lanai = (struct lanai_dev *) atmvcc->dev->dev_data;
|
|
if (lvcc == NULL)
|
|
return;
|
|
clear_bit(ATM_VF_READY, &atmvcc->flags);
|
|
clear_bit(ATM_VF_PARTIAL, &atmvcc->flags);
|
|
if (lvcc->rx.atmvcc == atmvcc) {
|
|
lanai_shutdown_rx_vci(lvcc);
|
|
if (atmvcc->qos.aal == ATM_AAL0) {
|
|
if (--lanai->naal0 <= 0)
|
|
aal0_buffer_free(lanai);
|
|
} else
|
|
lanai_buf_deallocate(&lvcc->rx.buf, lanai->pci);
|
|
lvcc->rx.atmvcc = NULL;
|
|
}
|
|
if (lvcc->tx.atmvcc == atmvcc) {
|
|
if (atmvcc == lanai->cbrvcc) {
|
|
if (lvcc->vbase != NULL)
|
|
lanai_cbr_shutdown(lanai);
|
|
lanai->cbrvcc = NULL;
|
|
}
|
|
lanai_shutdown_tx_vci(lanai, lvcc);
|
|
lanai_buf_deallocate(&lvcc->tx.buf, lanai->pci);
|
|
lvcc->tx.atmvcc = NULL;
|
|
}
|
|
if (--lvcc->nref == 0) {
|
|
host_vcc_unbind(lanai, lvcc);
|
|
kfree(lvcc);
|
|
}
|
|
atmvcc->dev_data = NULL;
|
|
clear_bit(ATM_VF_ADDR, &atmvcc->flags);
|
|
}
|
|
|
|
/* open a vcc on the card to vpi/vci */
|
|
static int lanai_open(struct atm_vcc *atmvcc)
|
|
{
|
|
struct lanai_dev *lanai;
|
|
struct lanai_vcc *lvcc;
|
|
int result = 0;
|
|
int vci = atmvcc->vci;
|
|
short vpi = atmvcc->vpi;
|
|
/* we don't support partial open - it's not really useful anyway */
|
|
if ((test_bit(ATM_VF_PARTIAL, &atmvcc->flags)) ||
|
|
(vpi == ATM_VPI_UNSPEC) || (vci == ATM_VCI_UNSPEC))
|
|
return -EINVAL;
|
|
lanai = (struct lanai_dev *) atmvcc->dev->dev_data;
|
|
result = lanai_normalize_ci(lanai, atmvcc, &vpi, &vci);
|
|
if (unlikely(result != 0))
|
|
goto out;
|
|
set_bit(ATM_VF_ADDR, &atmvcc->flags);
|
|
if (atmvcc->qos.aal != ATM_AAL0 && atmvcc->qos.aal != ATM_AAL5)
|
|
return -EINVAL;
|
|
DPRINTK(DEV_LABEL "(itf %d): open %d.%d\n", lanai->number,
|
|
(int) vpi, vci);
|
|
lvcc = lanai->vccs[vci];
|
|
if (lvcc == NULL) {
|
|
lvcc = new_lanai_vcc();
|
|
if (unlikely(lvcc == NULL))
|
|
return -ENOMEM;
|
|
atmvcc->dev_data = lvcc;
|
|
}
|
|
lvcc->nref++;
|
|
if (atmvcc->qos.rxtp.traffic_class != ATM_NONE) {
|
|
APRINTK(lvcc->rx.atmvcc == NULL, "rx.atmvcc!=NULL, vci=%d\n",
|
|
vci);
|
|
if (atmvcc->qos.aal == ATM_AAL0) {
|
|
if (lanai->naal0 == 0)
|
|
result = aal0_buffer_allocate(lanai);
|
|
} else
|
|
result = lanai_setup_rx_vci_aal5(
|
|
lanai, lvcc, &atmvcc->qos);
|
|
if (unlikely(result != 0))
|
|
goto out_free;
|
|
lvcc->rx.atmvcc = atmvcc;
|
|
lvcc->stats.rx_nomem = 0;
|
|
lvcc->stats.x.aal5.rx_badlen = 0;
|
|
lvcc->stats.x.aal5.service_trash = 0;
|
|
lvcc->stats.x.aal5.service_stream = 0;
|
|
lvcc->stats.x.aal5.service_rxcrc = 0;
|
|
if (atmvcc->qos.aal == ATM_AAL0)
|
|
lanai->naal0++;
|
|
}
|
|
if (atmvcc->qos.txtp.traffic_class != ATM_NONE) {
|
|
APRINTK(lvcc->tx.atmvcc == NULL, "tx.atmvcc!=NULL, vci=%d\n",
|
|
vci);
|
|
result = lanai_setup_tx_vci(lanai, lvcc, &atmvcc->qos);
|
|
if (unlikely(result != 0))
|
|
goto out_free;
|
|
lvcc->tx.atmvcc = atmvcc;
|
|
if (atmvcc->qos.txtp.traffic_class == ATM_CBR) {
|
|
APRINTK(lanai->cbrvcc == NULL,
|
|
"cbrvcc!=NULL, vci=%d\n", vci);
|
|
lanai->cbrvcc = atmvcc;
|
|
}
|
|
}
|
|
host_vcc_bind(lanai, lvcc, vci);
|
|
/*
|
|
* Make sure everything made it to RAM before we tell the card about
|
|
* the VCC
|
|
*/
|
|
wmb();
|
|
if (atmvcc == lvcc->rx.atmvcc)
|
|
host_vcc_start_rx(lvcc);
|
|
if (atmvcc == lvcc->tx.atmvcc) {
|
|
host_vcc_start_tx(lvcc);
|
|
if (lanai->cbrvcc == atmvcc)
|
|
lanai_cbr_setup(lanai);
|
|
}
|
|
set_bit(ATM_VF_READY, &atmvcc->flags);
|
|
return 0;
|
|
out_free:
|
|
lanai_close(atmvcc);
|
|
out:
|
|
return result;
|
|
}
|
|
|
|
static int lanai_send(struct atm_vcc *atmvcc, struct sk_buff *skb)
|
|
{
|
|
struct lanai_vcc *lvcc = (struct lanai_vcc *) atmvcc->dev_data;
|
|
struct lanai_dev *lanai = (struct lanai_dev *) atmvcc->dev->dev_data;
|
|
unsigned long flags;
|
|
if (unlikely(lvcc == NULL || lvcc->vbase == NULL ||
|
|
lvcc->tx.atmvcc != atmvcc))
|
|
goto einval;
|
|
#ifdef DEBUG
|
|
if (unlikely(skb == NULL)) {
|
|
DPRINTK("lanai_send: skb==NULL for vci=%d\n", atmvcc->vci);
|
|
goto einval;
|
|
}
|
|
if (unlikely(lanai == NULL)) {
|
|
DPRINTK("lanai_send: lanai==NULL for vci=%d\n", atmvcc->vci);
|
|
goto einval;
|
|
}
|
|
#endif
|
|
ATM_SKB(skb)->vcc = atmvcc;
|
|
switch (atmvcc->qos.aal) {
|
|
case ATM_AAL5:
|
|
read_lock_irqsave(&vcc_sklist_lock, flags);
|
|
vcc_tx_aal5(lanai, lvcc, skb);
|
|
read_unlock_irqrestore(&vcc_sklist_lock, flags);
|
|
return 0;
|
|
case ATM_AAL0:
|
|
if (unlikely(skb->len != ATM_CELL_SIZE-1))
|
|
goto einval;
|
|
/* NOTE - this next line is technically invalid - we haven't unshared skb */
|
|
cpu_to_be32s((u32 *) skb->data);
|
|
read_lock_irqsave(&vcc_sklist_lock, flags);
|
|
vcc_tx_aal0(lanai, lvcc, skb);
|
|
read_unlock_irqrestore(&vcc_sklist_lock, flags);
|
|
return 0;
|
|
}
|
|
DPRINTK("lanai_send: bad aal=%d on vci=%d\n", (int) atmvcc->qos.aal,
|
|
atmvcc->vci);
|
|
einval:
|
|
lanai_free_skb(atmvcc, skb);
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int lanai_change_qos(struct atm_vcc *atmvcc,
|
|
/*const*/ struct atm_qos *qos, int flags)
|
|
{
|
|
return -EBUSY; /* TODO: need to write this */
|
|
}
|
|
|
|
#ifndef CONFIG_PROC_FS
|
|
#define lanai_proc_read NULL
|
|
#else
|
|
static int lanai_proc_read(struct atm_dev *atmdev, loff_t *pos, char *page)
|
|
{
|
|
struct lanai_dev *lanai = (struct lanai_dev *) atmdev->dev_data;
|
|
loff_t left = *pos;
|
|
struct lanai_vcc *lvcc;
|
|
if (left-- == 0)
|
|
return sprintf(page, DEV_LABEL "(itf %d): chip=LANAI%s, "
|
|
"serial=%u, magic=0x%08X, num_vci=%d\n",
|
|
atmdev->number, lanai->type==lanai2 ? "2" : "HB",
|
|
(unsigned int) lanai->serialno,
|
|
(unsigned int) lanai->magicno, lanai->num_vci);
|
|
if (left-- == 0)
|
|
return sprintf(page, "revision: board=%d, pci_if=%d\n",
|
|
lanai->board_rev, (int) lanai->pci->revision);
|
|
if (left-- == 0)
|
|
return sprintf(page, "EEPROM ESI: "
|
|
"%02X:%02X:%02X:%02X:%02X:%02X\n",
|
|
lanai->eeprom[EEPROM_MAC + 0],
|
|
lanai->eeprom[EEPROM_MAC + 1],
|
|
lanai->eeprom[EEPROM_MAC + 2],
|
|
lanai->eeprom[EEPROM_MAC + 3],
|
|
lanai->eeprom[EEPROM_MAC + 4],
|
|
lanai->eeprom[EEPROM_MAC + 5]);
|
|
if (left-- == 0)
|
|
return sprintf(page, "status: SOOL=%d, LOCD=%d, LED=%d, "
|
|
"GPIN=%d\n", (lanai->status & STATUS_SOOL) ? 1 : 0,
|
|
(lanai->status & STATUS_LOCD) ? 1 : 0,
|
|
(lanai->status & STATUS_LED) ? 1 : 0,
|
|
(lanai->status & STATUS_GPIN) ? 1 : 0);
|
|
if (left-- == 0)
|
|
return sprintf(page, "global buffer sizes: service=%Zu, "
|
|
"aal0_rx=%Zu\n", lanai_buf_size(&lanai->service),
|
|
lanai->naal0 ? lanai_buf_size(&lanai->aal0buf) : 0);
|
|
if (left-- == 0) {
|
|
get_statistics(lanai);
|
|
return sprintf(page, "cells in error: overflow=%u, "
|
|
"closed_vci=%u, bad_HEC=%u, rx_fifo=%u\n",
|
|
lanai->stats.ovfl_trash, lanai->stats.vci_trash,
|
|
lanai->stats.hec_err, lanai->stats.atm_ovfl);
|
|
}
|
|
if (left-- == 0)
|
|
return sprintf(page, "PCI errors: parity_detect=%u, "
|
|
"master_abort=%u, master_target_abort=%u,\n",
|
|
lanai->stats.pcierr_parity_detect,
|
|
lanai->stats.pcierr_serr_set,
|
|
lanai->stats.pcierr_m_target_abort);
|
|
if (left-- == 0)
|
|
return sprintf(page, " slave_target_abort=%u, "
|
|
"master_parity=%u\n", lanai->stats.pcierr_s_target_abort,
|
|
lanai->stats.pcierr_master_parity);
|
|
if (left-- == 0)
|
|
return sprintf(page, " no_tx=%u, "
|
|
"no_rx=%u, bad_rx_aal=%u\n", lanai->stats.service_norx,
|
|
lanai->stats.service_notx,
|
|
lanai->stats.service_rxnotaal5);
|
|
if (left-- == 0)
|
|
return sprintf(page, "resets: dma=%u, card=%u\n",
|
|
lanai->stats.dma_reenable, lanai->stats.card_reset);
|
|
/* At this point, "left" should be the VCI we're looking for */
|
|
read_lock(&vcc_sklist_lock);
|
|
for (; ; left++) {
|
|
if (left >= NUM_VCI) {
|
|
left = 0;
|
|
goto out;
|
|
}
|
|
if ((lvcc = lanai->vccs[left]) != NULL)
|
|
break;
|
|
(*pos)++;
|
|
}
|
|
/* Note that we re-use "left" here since we're done with it */
|
|
left = sprintf(page, "VCI %4d: nref=%d, rx_nomem=%u", (vci_t) left,
|
|
lvcc->nref, lvcc->stats.rx_nomem);
|
|
if (lvcc->rx.atmvcc != NULL) {
|
|
left += sprintf(&page[left], ",\n rx_AAL=%d",
|
|
lvcc->rx.atmvcc->qos.aal == ATM_AAL5 ? 5 : 0);
|
|
if (lvcc->rx.atmvcc->qos.aal == ATM_AAL5)
|
|
left += sprintf(&page[left], ", rx_buf_size=%Zu, "
|
|
"rx_bad_len=%u,\n rx_service_trash=%u, "
|
|
"rx_service_stream=%u, rx_bad_crc=%u",
|
|
lanai_buf_size(&lvcc->rx.buf),
|
|
lvcc->stats.x.aal5.rx_badlen,
|
|
lvcc->stats.x.aal5.service_trash,
|
|
lvcc->stats.x.aal5.service_stream,
|
|
lvcc->stats.x.aal5.service_rxcrc);
|
|
}
|
|
if (lvcc->tx.atmvcc != NULL)
|
|
left += sprintf(&page[left], ",\n tx_AAL=%d, "
|
|
"tx_buf_size=%Zu, tx_qos=%cBR, tx_backlogged=%c",
|
|
lvcc->tx.atmvcc->qos.aal == ATM_AAL5 ? 5 : 0,
|
|
lanai_buf_size(&lvcc->tx.buf),
|
|
lvcc->tx.atmvcc == lanai->cbrvcc ? 'C' : 'U',
|
|
vcc_is_backlogged(lvcc) ? 'Y' : 'N');
|
|
page[left++] = '\n';
|
|
page[left] = '\0';
|
|
out:
|
|
read_unlock(&vcc_sklist_lock);
|
|
return left;
|
|
}
|
|
#endif /* CONFIG_PROC_FS */
|
|
|
|
/* -------------------- HOOKS: */
|
|
|
|
static const struct atmdev_ops ops = {
|
|
.dev_close = lanai_dev_close,
|
|
.open = lanai_open,
|
|
.close = lanai_close,
|
|
.getsockopt = NULL,
|
|
.setsockopt = NULL,
|
|
.send = lanai_send,
|
|
.phy_put = NULL,
|
|
.phy_get = NULL,
|
|
.change_qos = lanai_change_qos,
|
|
.proc_read = lanai_proc_read,
|
|
.owner = THIS_MODULE
|
|
};
|
|
|
|
/* initialize one probed card */
|
|
static int __devinit lanai_init_one(struct pci_dev *pci,
|
|
const struct pci_device_id *ident)
|
|
{
|
|
struct lanai_dev *lanai;
|
|
struct atm_dev *atmdev;
|
|
int result;
|
|
|
|
lanai = kmalloc(sizeof(*lanai), GFP_KERNEL);
|
|
if (lanai == NULL) {
|
|
printk(KERN_ERR DEV_LABEL
|
|
": couldn't allocate dev_data structure!\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
atmdev = atm_dev_register(DEV_LABEL, &ops, -1, NULL);
|
|
if (atmdev == NULL) {
|
|
printk(KERN_ERR DEV_LABEL
|
|
": couldn't register atm device!\n");
|
|
kfree(lanai);
|
|
return -EBUSY;
|
|
}
|
|
|
|
atmdev->dev_data = lanai;
|
|
lanai->pci = pci;
|
|
lanai->type = (enum lanai_type) ident->device;
|
|
|
|
result = lanai_dev_open(atmdev);
|
|
if (result != 0) {
|
|
DPRINTK("lanai_start() failed, err=%d\n", -result);
|
|
atm_dev_deregister(atmdev);
|
|
kfree(lanai);
|
|
}
|
|
return result;
|
|
}
|
|
|
|
static struct pci_device_id lanai_pci_tbl[] = {
|
|
{ PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAI2) },
|
|
{ PCI_VDEVICE(EF, PCI_DEVICE_ID_EF_ATM_LANAIHB) },
|
|
{ 0, } /* terminal entry */
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, lanai_pci_tbl);
|
|
|
|
static struct pci_driver lanai_driver = {
|
|
.name = DEV_LABEL,
|
|
.id_table = lanai_pci_tbl,
|
|
.probe = lanai_init_one,
|
|
};
|
|
|
|
static int __init lanai_module_init(void)
|
|
{
|
|
int x;
|
|
|
|
x = pci_register_driver(&lanai_driver);
|
|
if (x != 0)
|
|
printk(KERN_ERR DEV_LABEL ": no adapter found\n");
|
|
return x;
|
|
}
|
|
|
|
static void __exit lanai_module_exit(void)
|
|
{
|
|
/* We'll only get called when all the interfaces are already
|
|
* gone, so there isn't much to do
|
|
*/
|
|
DPRINTK("cleanup_module()\n");
|
|
pci_unregister_driver(&lanai_driver);
|
|
}
|
|
|
|
module_init(lanai_module_init);
|
|
module_exit(lanai_module_exit);
|
|
|
|
MODULE_AUTHOR("Mitchell Blank Jr <mitch@sfgoth.com>");
|
|
MODULE_DESCRIPTION("Efficient Networks Speedstream 3010 driver");
|
|
MODULE_LICENSE("GPL");
|