mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-16 08:26:53 +07:00
c038f53842
mipi_dsi framework provides information about panel's mode of work. This info should be propagated upstream to configure all elements of the pipeline. As CRTC is the common denominator of the pipeline we can put such info into its structures. Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
1900 lines
49 KiB
C
1900 lines
49 KiB
C
/*
|
|
* Samsung SoC MIPI DSI Master driver.
|
|
*
|
|
* Copyright (c) 2014 Samsung Electronics Co., Ltd
|
|
*
|
|
* Contacts: Tomasz Figa <t.figa@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <asm/unaligned.h>
|
|
|
|
#include <drm/drmP.h>
|
|
#include <drm/drm_crtc_helper.h>
|
|
#include <drm/drm_mipi_dsi.h>
|
|
#include <drm/drm_panel.h>
|
|
#include <drm/drm_atomic_helper.h>
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/of_graph.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/component.h>
|
|
|
|
#include <video/mipi_display.h>
|
|
#include <video/videomode.h>
|
|
|
|
#include "exynos_drm_crtc.h"
|
|
#include "exynos_drm_drv.h"
|
|
|
|
/* returns true iff both arguments logically differs */
|
|
#define NEQV(a, b) (!(a) ^ !(b))
|
|
|
|
/* DSIM_STATUS */
|
|
#define DSIM_STOP_STATE_DAT(x) (((x) & 0xf) << 0)
|
|
#define DSIM_STOP_STATE_CLK (1 << 8)
|
|
#define DSIM_TX_READY_HS_CLK (1 << 10)
|
|
#define DSIM_PLL_STABLE (1 << 31)
|
|
|
|
/* DSIM_SWRST */
|
|
#define DSIM_FUNCRST (1 << 16)
|
|
#define DSIM_SWRST (1 << 0)
|
|
|
|
/* DSIM_TIMEOUT */
|
|
#define DSIM_LPDR_TIMEOUT(x) ((x) << 0)
|
|
#define DSIM_BTA_TIMEOUT(x) ((x) << 16)
|
|
|
|
/* DSIM_CLKCTRL */
|
|
#define DSIM_ESC_PRESCALER(x) (((x) & 0xffff) << 0)
|
|
#define DSIM_ESC_PRESCALER_MASK (0xffff << 0)
|
|
#define DSIM_LANE_ESC_CLK_EN_CLK (1 << 19)
|
|
#define DSIM_LANE_ESC_CLK_EN_DATA(x) (((x) & 0xf) << 20)
|
|
#define DSIM_LANE_ESC_CLK_EN_DATA_MASK (0xf << 20)
|
|
#define DSIM_BYTE_CLKEN (1 << 24)
|
|
#define DSIM_BYTE_CLK_SRC(x) (((x) & 0x3) << 25)
|
|
#define DSIM_BYTE_CLK_SRC_MASK (0x3 << 25)
|
|
#define DSIM_PLL_BYPASS (1 << 27)
|
|
#define DSIM_ESC_CLKEN (1 << 28)
|
|
#define DSIM_TX_REQUEST_HSCLK (1 << 31)
|
|
|
|
/* DSIM_CONFIG */
|
|
#define DSIM_LANE_EN_CLK (1 << 0)
|
|
#define DSIM_LANE_EN(x) (((x) & 0xf) << 1)
|
|
#define DSIM_NUM_OF_DATA_LANE(x) (((x) & 0x3) << 5)
|
|
#define DSIM_SUB_PIX_FORMAT(x) (((x) & 0x7) << 8)
|
|
#define DSIM_MAIN_PIX_FORMAT_MASK (0x7 << 12)
|
|
#define DSIM_MAIN_PIX_FORMAT_RGB888 (0x7 << 12)
|
|
#define DSIM_MAIN_PIX_FORMAT_RGB666 (0x6 << 12)
|
|
#define DSIM_MAIN_PIX_FORMAT_RGB666_P (0x5 << 12)
|
|
#define DSIM_MAIN_PIX_FORMAT_RGB565 (0x4 << 12)
|
|
#define DSIM_SUB_VC (((x) & 0x3) << 16)
|
|
#define DSIM_MAIN_VC (((x) & 0x3) << 18)
|
|
#define DSIM_HSA_MODE (1 << 20)
|
|
#define DSIM_HBP_MODE (1 << 21)
|
|
#define DSIM_HFP_MODE (1 << 22)
|
|
#define DSIM_HSE_MODE (1 << 23)
|
|
#define DSIM_AUTO_MODE (1 << 24)
|
|
#define DSIM_VIDEO_MODE (1 << 25)
|
|
#define DSIM_BURST_MODE (1 << 26)
|
|
#define DSIM_SYNC_INFORM (1 << 27)
|
|
#define DSIM_EOT_DISABLE (1 << 28)
|
|
#define DSIM_MFLUSH_VS (1 << 29)
|
|
/* This flag is valid only for exynos3250/3472/5260/5430 */
|
|
#define DSIM_CLKLANE_STOP (1 << 30)
|
|
|
|
/* DSIM_ESCMODE */
|
|
#define DSIM_TX_TRIGGER_RST (1 << 4)
|
|
#define DSIM_TX_LPDT_LP (1 << 6)
|
|
#define DSIM_CMD_LPDT_LP (1 << 7)
|
|
#define DSIM_FORCE_BTA (1 << 16)
|
|
#define DSIM_FORCE_STOP_STATE (1 << 20)
|
|
#define DSIM_STOP_STATE_CNT(x) (((x) & 0x7ff) << 21)
|
|
#define DSIM_STOP_STATE_CNT_MASK (0x7ff << 21)
|
|
|
|
/* DSIM_MDRESOL */
|
|
#define DSIM_MAIN_STAND_BY (1 << 31)
|
|
#define DSIM_MAIN_VRESOL(x, num_bits) (((x) & ((1 << (num_bits)) - 1)) << 16)
|
|
#define DSIM_MAIN_HRESOL(x, num_bits) (((x) & ((1 << (num_bits)) - 1)) << 0)
|
|
|
|
/* DSIM_MVPORCH */
|
|
#define DSIM_CMD_ALLOW(x) ((x) << 28)
|
|
#define DSIM_STABLE_VFP(x) ((x) << 16)
|
|
#define DSIM_MAIN_VBP(x) ((x) << 0)
|
|
#define DSIM_CMD_ALLOW_MASK (0xf << 28)
|
|
#define DSIM_STABLE_VFP_MASK (0x7ff << 16)
|
|
#define DSIM_MAIN_VBP_MASK (0x7ff << 0)
|
|
|
|
/* DSIM_MHPORCH */
|
|
#define DSIM_MAIN_HFP(x) ((x) << 16)
|
|
#define DSIM_MAIN_HBP(x) ((x) << 0)
|
|
#define DSIM_MAIN_HFP_MASK ((0xffff) << 16)
|
|
#define DSIM_MAIN_HBP_MASK ((0xffff) << 0)
|
|
|
|
/* DSIM_MSYNC */
|
|
#define DSIM_MAIN_VSA(x) ((x) << 22)
|
|
#define DSIM_MAIN_HSA(x) ((x) << 0)
|
|
#define DSIM_MAIN_VSA_MASK ((0x3ff) << 22)
|
|
#define DSIM_MAIN_HSA_MASK ((0xffff) << 0)
|
|
|
|
/* DSIM_SDRESOL */
|
|
#define DSIM_SUB_STANDY(x) ((x) << 31)
|
|
#define DSIM_SUB_VRESOL(x) ((x) << 16)
|
|
#define DSIM_SUB_HRESOL(x) ((x) << 0)
|
|
#define DSIM_SUB_STANDY_MASK ((0x1) << 31)
|
|
#define DSIM_SUB_VRESOL_MASK ((0x7ff) << 16)
|
|
#define DSIM_SUB_HRESOL_MASK ((0x7ff) << 0)
|
|
|
|
/* DSIM_INTSRC */
|
|
#define DSIM_INT_PLL_STABLE (1 << 31)
|
|
#define DSIM_INT_SW_RST_RELEASE (1 << 30)
|
|
#define DSIM_INT_SFR_FIFO_EMPTY (1 << 29)
|
|
#define DSIM_INT_SFR_HDR_FIFO_EMPTY (1 << 28)
|
|
#define DSIM_INT_BTA (1 << 25)
|
|
#define DSIM_INT_FRAME_DONE (1 << 24)
|
|
#define DSIM_INT_RX_TIMEOUT (1 << 21)
|
|
#define DSIM_INT_BTA_TIMEOUT (1 << 20)
|
|
#define DSIM_INT_RX_DONE (1 << 18)
|
|
#define DSIM_INT_RX_TE (1 << 17)
|
|
#define DSIM_INT_RX_ACK (1 << 16)
|
|
#define DSIM_INT_RX_ECC_ERR (1 << 15)
|
|
#define DSIM_INT_RX_CRC_ERR (1 << 14)
|
|
|
|
/* DSIM_FIFOCTRL */
|
|
#define DSIM_RX_DATA_FULL (1 << 25)
|
|
#define DSIM_RX_DATA_EMPTY (1 << 24)
|
|
#define DSIM_SFR_HEADER_FULL (1 << 23)
|
|
#define DSIM_SFR_HEADER_EMPTY (1 << 22)
|
|
#define DSIM_SFR_PAYLOAD_FULL (1 << 21)
|
|
#define DSIM_SFR_PAYLOAD_EMPTY (1 << 20)
|
|
#define DSIM_I80_HEADER_FULL (1 << 19)
|
|
#define DSIM_I80_HEADER_EMPTY (1 << 18)
|
|
#define DSIM_I80_PAYLOAD_FULL (1 << 17)
|
|
#define DSIM_I80_PAYLOAD_EMPTY (1 << 16)
|
|
#define DSIM_SD_HEADER_FULL (1 << 15)
|
|
#define DSIM_SD_HEADER_EMPTY (1 << 14)
|
|
#define DSIM_SD_PAYLOAD_FULL (1 << 13)
|
|
#define DSIM_SD_PAYLOAD_EMPTY (1 << 12)
|
|
#define DSIM_MD_HEADER_FULL (1 << 11)
|
|
#define DSIM_MD_HEADER_EMPTY (1 << 10)
|
|
#define DSIM_MD_PAYLOAD_FULL (1 << 9)
|
|
#define DSIM_MD_PAYLOAD_EMPTY (1 << 8)
|
|
#define DSIM_RX_FIFO (1 << 4)
|
|
#define DSIM_SFR_FIFO (1 << 3)
|
|
#define DSIM_I80_FIFO (1 << 2)
|
|
#define DSIM_SD_FIFO (1 << 1)
|
|
#define DSIM_MD_FIFO (1 << 0)
|
|
|
|
/* DSIM_PHYACCHR */
|
|
#define DSIM_AFC_EN (1 << 14)
|
|
#define DSIM_AFC_CTL(x) (((x) & 0x7) << 5)
|
|
|
|
/* DSIM_PLLCTRL */
|
|
#define DSIM_FREQ_BAND(x) ((x) << 24)
|
|
#define DSIM_PLL_EN (1 << 23)
|
|
#define DSIM_PLL_P(x) ((x) << 13)
|
|
#define DSIM_PLL_M(x) ((x) << 4)
|
|
#define DSIM_PLL_S(x) ((x) << 1)
|
|
|
|
/* DSIM_PHYCTRL */
|
|
#define DSIM_PHYCTRL_ULPS_EXIT(x) (((x) & 0x1ff) << 0)
|
|
#define DSIM_PHYCTRL_B_DPHYCTL_VREG_LP (1 << 30)
|
|
#define DSIM_PHYCTRL_B_DPHYCTL_SLEW_UP (1 << 14)
|
|
|
|
/* DSIM_PHYTIMING */
|
|
#define DSIM_PHYTIMING_LPX(x) ((x) << 8)
|
|
#define DSIM_PHYTIMING_HS_EXIT(x) ((x) << 0)
|
|
|
|
/* DSIM_PHYTIMING1 */
|
|
#define DSIM_PHYTIMING1_CLK_PREPARE(x) ((x) << 24)
|
|
#define DSIM_PHYTIMING1_CLK_ZERO(x) ((x) << 16)
|
|
#define DSIM_PHYTIMING1_CLK_POST(x) ((x) << 8)
|
|
#define DSIM_PHYTIMING1_CLK_TRAIL(x) ((x) << 0)
|
|
|
|
/* DSIM_PHYTIMING2 */
|
|
#define DSIM_PHYTIMING2_HS_PREPARE(x) ((x) << 16)
|
|
#define DSIM_PHYTIMING2_HS_ZERO(x) ((x) << 8)
|
|
#define DSIM_PHYTIMING2_HS_TRAIL(x) ((x) << 0)
|
|
|
|
#define DSI_MAX_BUS_WIDTH 4
|
|
#define DSI_NUM_VIRTUAL_CHANNELS 4
|
|
#define DSI_TX_FIFO_SIZE 2048
|
|
#define DSI_RX_FIFO_SIZE 256
|
|
#define DSI_XFER_TIMEOUT_MS 100
|
|
#define DSI_RX_FIFO_EMPTY 0x30800002
|
|
|
|
#define OLD_SCLK_MIPI_CLK_NAME "pll_clk"
|
|
|
|
static char *clk_names[5] = { "bus_clk", "sclk_mipi",
|
|
"phyclk_mipidphy0_bitclkdiv8", "phyclk_mipidphy0_rxclkesc0",
|
|
"sclk_rgb_vclk_to_dsim0" };
|
|
|
|
enum exynos_dsi_transfer_type {
|
|
EXYNOS_DSI_TX,
|
|
EXYNOS_DSI_RX,
|
|
};
|
|
|
|
struct exynos_dsi_transfer {
|
|
struct list_head list;
|
|
struct completion completed;
|
|
int result;
|
|
struct mipi_dsi_packet packet;
|
|
u16 flags;
|
|
u16 tx_done;
|
|
|
|
u8 *rx_payload;
|
|
u16 rx_len;
|
|
u16 rx_done;
|
|
};
|
|
|
|
#define DSIM_STATE_ENABLED BIT(0)
|
|
#define DSIM_STATE_INITIALIZED BIT(1)
|
|
#define DSIM_STATE_CMD_LPM BIT(2)
|
|
#define DSIM_STATE_VIDOUT_AVAILABLE BIT(3)
|
|
|
|
struct exynos_dsi_driver_data {
|
|
const unsigned int *reg_ofs;
|
|
unsigned int plltmr_reg;
|
|
unsigned int has_freqband:1;
|
|
unsigned int has_clklane_stop:1;
|
|
unsigned int num_clks;
|
|
unsigned int max_freq;
|
|
unsigned int wait_for_reset;
|
|
unsigned int num_bits_resol;
|
|
const unsigned int *reg_values;
|
|
};
|
|
|
|
struct exynos_dsi {
|
|
struct drm_encoder encoder;
|
|
struct mipi_dsi_host dsi_host;
|
|
struct drm_connector connector;
|
|
struct drm_panel *panel;
|
|
struct device *dev;
|
|
|
|
void __iomem *reg_base;
|
|
struct phy *phy;
|
|
struct clk **clks;
|
|
struct regulator_bulk_data supplies[2];
|
|
int irq;
|
|
int te_gpio;
|
|
|
|
u32 pll_clk_rate;
|
|
u32 burst_clk_rate;
|
|
u32 esc_clk_rate;
|
|
u32 lanes;
|
|
u32 mode_flags;
|
|
u32 format;
|
|
struct videomode vm;
|
|
|
|
int state;
|
|
struct drm_property *brightness;
|
|
struct completion completed;
|
|
|
|
spinlock_t transfer_lock; /* protects transfer_list */
|
|
struct list_head transfer_list;
|
|
|
|
const struct exynos_dsi_driver_data *driver_data;
|
|
struct device_node *bridge_node;
|
|
};
|
|
|
|
#define host_to_dsi(host) container_of(host, struct exynos_dsi, dsi_host)
|
|
#define connector_to_dsi(c) container_of(c, struct exynos_dsi, connector)
|
|
|
|
static inline struct exynos_dsi *encoder_to_dsi(struct drm_encoder *e)
|
|
{
|
|
return container_of(e, struct exynos_dsi, encoder);
|
|
}
|
|
|
|
enum reg_idx {
|
|
DSIM_STATUS_REG, /* Status register */
|
|
DSIM_SWRST_REG, /* Software reset register */
|
|
DSIM_CLKCTRL_REG, /* Clock control register */
|
|
DSIM_TIMEOUT_REG, /* Time out register */
|
|
DSIM_CONFIG_REG, /* Configuration register */
|
|
DSIM_ESCMODE_REG, /* Escape mode register */
|
|
DSIM_MDRESOL_REG,
|
|
DSIM_MVPORCH_REG, /* Main display Vporch register */
|
|
DSIM_MHPORCH_REG, /* Main display Hporch register */
|
|
DSIM_MSYNC_REG, /* Main display sync area register */
|
|
DSIM_INTSRC_REG, /* Interrupt source register */
|
|
DSIM_INTMSK_REG, /* Interrupt mask register */
|
|
DSIM_PKTHDR_REG, /* Packet Header FIFO register */
|
|
DSIM_PAYLOAD_REG, /* Payload FIFO register */
|
|
DSIM_RXFIFO_REG, /* Read FIFO register */
|
|
DSIM_FIFOCTRL_REG, /* FIFO status and control register */
|
|
DSIM_PLLCTRL_REG, /* PLL control register */
|
|
DSIM_PHYCTRL_REG,
|
|
DSIM_PHYTIMING_REG,
|
|
DSIM_PHYTIMING1_REG,
|
|
DSIM_PHYTIMING2_REG,
|
|
NUM_REGS
|
|
};
|
|
|
|
static inline void exynos_dsi_write(struct exynos_dsi *dsi, enum reg_idx idx,
|
|
u32 val)
|
|
{
|
|
|
|
writel(val, dsi->reg_base + dsi->driver_data->reg_ofs[idx]);
|
|
}
|
|
|
|
static inline u32 exynos_dsi_read(struct exynos_dsi *dsi, enum reg_idx idx)
|
|
{
|
|
return readl(dsi->reg_base + dsi->driver_data->reg_ofs[idx]);
|
|
}
|
|
|
|
static const unsigned int exynos_reg_ofs[] = {
|
|
[DSIM_STATUS_REG] = 0x00,
|
|
[DSIM_SWRST_REG] = 0x04,
|
|
[DSIM_CLKCTRL_REG] = 0x08,
|
|
[DSIM_TIMEOUT_REG] = 0x0c,
|
|
[DSIM_CONFIG_REG] = 0x10,
|
|
[DSIM_ESCMODE_REG] = 0x14,
|
|
[DSIM_MDRESOL_REG] = 0x18,
|
|
[DSIM_MVPORCH_REG] = 0x1c,
|
|
[DSIM_MHPORCH_REG] = 0x20,
|
|
[DSIM_MSYNC_REG] = 0x24,
|
|
[DSIM_INTSRC_REG] = 0x2c,
|
|
[DSIM_INTMSK_REG] = 0x30,
|
|
[DSIM_PKTHDR_REG] = 0x34,
|
|
[DSIM_PAYLOAD_REG] = 0x38,
|
|
[DSIM_RXFIFO_REG] = 0x3c,
|
|
[DSIM_FIFOCTRL_REG] = 0x44,
|
|
[DSIM_PLLCTRL_REG] = 0x4c,
|
|
[DSIM_PHYCTRL_REG] = 0x5c,
|
|
[DSIM_PHYTIMING_REG] = 0x64,
|
|
[DSIM_PHYTIMING1_REG] = 0x68,
|
|
[DSIM_PHYTIMING2_REG] = 0x6c,
|
|
};
|
|
|
|
static const unsigned int exynos5433_reg_ofs[] = {
|
|
[DSIM_STATUS_REG] = 0x04,
|
|
[DSIM_SWRST_REG] = 0x0C,
|
|
[DSIM_CLKCTRL_REG] = 0x10,
|
|
[DSIM_TIMEOUT_REG] = 0x14,
|
|
[DSIM_CONFIG_REG] = 0x18,
|
|
[DSIM_ESCMODE_REG] = 0x1C,
|
|
[DSIM_MDRESOL_REG] = 0x20,
|
|
[DSIM_MVPORCH_REG] = 0x24,
|
|
[DSIM_MHPORCH_REG] = 0x28,
|
|
[DSIM_MSYNC_REG] = 0x2C,
|
|
[DSIM_INTSRC_REG] = 0x34,
|
|
[DSIM_INTMSK_REG] = 0x38,
|
|
[DSIM_PKTHDR_REG] = 0x3C,
|
|
[DSIM_PAYLOAD_REG] = 0x40,
|
|
[DSIM_RXFIFO_REG] = 0x44,
|
|
[DSIM_FIFOCTRL_REG] = 0x4C,
|
|
[DSIM_PLLCTRL_REG] = 0x94,
|
|
[DSIM_PHYCTRL_REG] = 0xA4,
|
|
[DSIM_PHYTIMING_REG] = 0xB4,
|
|
[DSIM_PHYTIMING1_REG] = 0xB8,
|
|
[DSIM_PHYTIMING2_REG] = 0xBC,
|
|
};
|
|
|
|
enum reg_value_idx {
|
|
RESET_TYPE,
|
|
PLL_TIMER,
|
|
STOP_STATE_CNT,
|
|
PHYCTRL_ULPS_EXIT,
|
|
PHYCTRL_VREG_LP,
|
|
PHYCTRL_SLEW_UP,
|
|
PHYTIMING_LPX,
|
|
PHYTIMING_HS_EXIT,
|
|
PHYTIMING_CLK_PREPARE,
|
|
PHYTIMING_CLK_ZERO,
|
|
PHYTIMING_CLK_POST,
|
|
PHYTIMING_CLK_TRAIL,
|
|
PHYTIMING_HS_PREPARE,
|
|
PHYTIMING_HS_ZERO,
|
|
PHYTIMING_HS_TRAIL
|
|
};
|
|
|
|
static const unsigned int reg_values[] = {
|
|
[RESET_TYPE] = DSIM_SWRST,
|
|
[PLL_TIMER] = 500,
|
|
[STOP_STATE_CNT] = 0xf,
|
|
[PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0x0af),
|
|
[PHYCTRL_VREG_LP] = 0,
|
|
[PHYCTRL_SLEW_UP] = 0,
|
|
[PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x06),
|
|
[PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0b),
|
|
[PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x07),
|
|
[PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x27),
|
|
[PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0d),
|
|
[PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x08),
|
|
[PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x09),
|
|
[PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x0d),
|
|
[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0b),
|
|
};
|
|
|
|
static const unsigned int exynos5422_reg_values[] = {
|
|
[RESET_TYPE] = DSIM_SWRST,
|
|
[PLL_TIMER] = 500,
|
|
[STOP_STATE_CNT] = 0xf,
|
|
[PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0xaf),
|
|
[PHYCTRL_VREG_LP] = 0,
|
|
[PHYCTRL_SLEW_UP] = 0,
|
|
[PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x08),
|
|
[PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0d),
|
|
[PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x09),
|
|
[PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x30),
|
|
[PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0e),
|
|
[PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x0a),
|
|
[PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x0c),
|
|
[PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x11),
|
|
[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0d),
|
|
};
|
|
|
|
static const unsigned int exynos5433_reg_values[] = {
|
|
[RESET_TYPE] = DSIM_FUNCRST,
|
|
[PLL_TIMER] = 22200,
|
|
[STOP_STATE_CNT] = 0xa,
|
|
[PHYCTRL_ULPS_EXIT] = DSIM_PHYCTRL_ULPS_EXIT(0x190),
|
|
[PHYCTRL_VREG_LP] = DSIM_PHYCTRL_B_DPHYCTL_VREG_LP,
|
|
[PHYCTRL_SLEW_UP] = DSIM_PHYCTRL_B_DPHYCTL_SLEW_UP,
|
|
[PHYTIMING_LPX] = DSIM_PHYTIMING_LPX(0x07),
|
|
[PHYTIMING_HS_EXIT] = DSIM_PHYTIMING_HS_EXIT(0x0c),
|
|
[PHYTIMING_CLK_PREPARE] = DSIM_PHYTIMING1_CLK_PREPARE(0x09),
|
|
[PHYTIMING_CLK_ZERO] = DSIM_PHYTIMING1_CLK_ZERO(0x2d),
|
|
[PHYTIMING_CLK_POST] = DSIM_PHYTIMING1_CLK_POST(0x0e),
|
|
[PHYTIMING_CLK_TRAIL] = DSIM_PHYTIMING1_CLK_TRAIL(0x09),
|
|
[PHYTIMING_HS_PREPARE] = DSIM_PHYTIMING2_HS_PREPARE(0x0b),
|
|
[PHYTIMING_HS_ZERO] = DSIM_PHYTIMING2_HS_ZERO(0x10),
|
|
[PHYTIMING_HS_TRAIL] = DSIM_PHYTIMING2_HS_TRAIL(0x0c),
|
|
};
|
|
|
|
static const struct exynos_dsi_driver_data exynos3_dsi_driver_data = {
|
|
.reg_ofs = exynos_reg_ofs,
|
|
.plltmr_reg = 0x50,
|
|
.has_freqband = 1,
|
|
.has_clklane_stop = 1,
|
|
.num_clks = 2,
|
|
.max_freq = 1000,
|
|
.wait_for_reset = 1,
|
|
.num_bits_resol = 11,
|
|
.reg_values = reg_values,
|
|
};
|
|
|
|
static const struct exynos_dsi_driver_data exynos4_dsi_driver_data = {
|
|
.reg_ofs = exynos_reg_ofs,
|
|
.plltmr_reg = 0x50,
|
|
.has_freqband = 1,
|
|
.has_clklane_stop = 1,
|
|
.num_clks = 2,
|
|
.max_freq = 1000,
|
|
.wait_for_reset = 1,
|
|
.num_bits_resol = 11,
|
|
.reg_values = reg_values,
|
|
};
|
|
|
|
static const struct exynos_dsi_driver_data exynos5_dsi_driver_data = {
|
|
.reg_ofs = exynos_reg_ofs,
|
|
.plltmr_reg = 0x58,
|
|
.num_clks = 2,
|
|
.max_freq = 1000,
|
|
.wait_for_reset = 1,
|
|
.num_bits_resol = 11,
|
|
.reg_values = reg_values,
|
|
};
|
|
|
|
static const struct exynos_dsi_driver_data exynos5433_dsi_driver_data = {
|
|
.reg_ofs = exynos5433_reg_ofs,
|
|
.plltmr_reg = 0xa0,
|
|
.has_clklane_stop = 1,
|
|
.num_clks = 5,
|
|
.max_freq = 1500,
|
|
.wait_for_reset = 0,
|
|
.num_bits_resol = 12,
|
|
.reg_values = exynos5433_reg_values,
|
|
};
|
|
|
|
static const struct exynos_dsi_driver_data exynos5422_dsi_driver_data = {
|
|
.reg_ofs = exynos5433_reg_ofs,
|
|
.plltmr_reg = 0xa0,
|
|
.has_clklane_stop = 1,
|
|
.num_clks = 2,
|
|
.max_freq = 1500,
|
|
.wait_for_reset = 1,
|
|
.num_bits_resol = 12,
|
|
.reg_values = exynos5422_reg_values,
|
|
};
|
|
|
|
static const struct of_device_id exynos_dsi_of_match[] = {
|
|
{ .compatible = "samsung,exynos3250-mipi-dsi",
|
|
.data = &exynos3_dsi_driver_data },
|
|
{ .compatible = "samsung,exynos4210-mipi-dsi",
|
|
.data = &exynos4_dsi_driver_data },
|
|
{ .compatible = "samsung,exynos5410-mipi-dsi",
|
|
.data = &exynos5_dsi_driver_data },
|
|
{ .compatible = "samsung,exynos5422-mipi-dsi",
|
|
.data = &exynos5422_dsi_driver_data },
|
|
{ .compatible = "samsung,exynos5433-mipi-dsi",
|
|
.data = &exynos5433_dsi_driver_data },
|
|
{ }
|
|
};
|
|
|
|
static void exynos_dsi_wait_for_reset(struct exynos_dsi *dsi)
|
|
{
|
|
if (wait_for_completion_timeout(&dsi->completed, msecs_to_jiffies(300)))
|
|
return;
|
|
|
|
dev_err(dsi->dev, "timeout waiting for reset\n");
|
|
}
|
|
|
|
static void exynos_dsi_reset(struct exynos_dsi *dsi)
|
|
{
|
|
u32 reset_val = dsi->driver_data->reg_values[RESET_TYPE];
|
|
|
|
reinit_completion(&dsi->completed);
|
|
exynos_dsi_write(dsi, DSIM_SWRST_REG, reset_val);
|
|
}
|
|
|
|
#ifndef MHZ
|
|
#define MHZ (1000*1000)
|
|
#endif
|
|
|
|
static unsigned long exynos_dsi_pll_find_pms(struct exynos_dsi *dsi,
|
|
unsigned long fin, unsigned long fout, u8 *p, u16 *m, u8 *s)
|
|
{
|
|
const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
|
|
unsigned long best_freq = 0;
|
|
u32 min_delta = 0xffffffff;
|
|
u8 p_min, p_max;
|
|
u8 _p, uninitialized_var(best_p);
|
|
u16 _m, uninitialized_var(best_m);
|
|
u8 _s, uninitialized_var(best_s);
|
|
|
|
p_min = DIV_ROUND_UP(fin, (12 * MHZ));
|
|
p_max = fin / (6 * MHZ);
|
|
|
|
for (_p = p_min; _p <= p_max; ++_p) {
|
|
for (_s = 0; _s <= 5; ++_s) {
|
|
u64 tmp;
|
|
u32 delta;
|
|
|
|
tmp = (u64)fout * (_p << _s);
|
|
do_div(tmp, fin);
|
|
_m = tmp;
|
|
if (_m < 41 || _m > 125)
|
|
continue;
|
|
|
|
tmp = (u64)_m * fin;
|
|
do_div(tmp, _p);
|
|
if (tmp < 500 * MHZ ||
|
|
tmp > driver_data->max_freq * MHZ)
|
|
continue;
|
|
|
|
tmp = (u64)_m * fin;
|
|
do_div(tmp, _p << _s);
|
|
|
|
delta = abs(fout - tmp);
|
|
if (delta < min_delta) {
|
|
best_p = _p;
|
|
best_m = _m;
|
|
best_s = _s;
|
|
min_delta = delta;
|
|
best_freq = tmp;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (best_freq) {
|
|
*p = best_p;
|
|
*m = best_m;
|
|
*s = best_s;
|
|
}
|
|
|
|
return best_freq;
|
|
}
|
|
|
|
static unsigned long exynos_dsi_set_pll(struct exynos_dsi *dsi,
|
|
unsigned long freq)
|
|
{
|
|
const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
|
|
unsigned long fin, fout;
|
|
int timeout;
|
|
u8 p, s;
|
|
u16 m;
|
|
u32 reg;
|
|
|
|
fin = dsi->pll_clk_rate;
|
|
fout = exynos_dsi_pll_find_pms(dsi, fin, freq, &p, &m, &s);
|
|
if (!fout) {
|
|
dev_err(dsi->dev,
|
|
"failed to find PLL PMS for requested frequency\n");
|
|
return 0;
|
|
}
|
|
dev_dbg(dsi->dev, "PLL freq %lu, (p %d, m %d, s %d)\n", fout, p, m, s);
|
|
|
|
writel(driver_data->reg_values[PLL_TIMER],
|
|
dsi->reg_base + driver_data->plltmr_reg);
|
|
|
|
reg = DSIM_PLL_EN | DSIM_PLL_P(p) | DSIM_PLL_M(m) | DSIM_PLL_S(s);
|
|
|
|
if (driver_data->has_freqband) {
|
|
static const unsigned long freq_bands[] = {
|
|
100 * MHZ, 120 * MHZ, 160 * MHZ, 200 * MHZ,
|
|
270 * MHZ, 320 * MHZ, 390 * MHZ, 450 * MHZ,
|
|
510 * MHZ, 560 * MHZ, 640 * MHZ, 690 * MHZ,
|
|
770 * MHZ, 870 * MHZ, 950 * MHZ,
|
|
};
|
|
int band;
|
|
|
|
for (band = 0; band < ARRAY_SIZE(freq_bands); ++band)
|
|
if (fout < freq_bands[band])
|
|
break;
|
|
|
|
dev_dbg(dsi->dev, "band %d\n", band);
|
|
|
|
reg |= DSIM_FREQ_BAND(band);
|
|
}
|
|
|
|
exynos_dsi_write(dsi, DSIM_PLLCTRL_REG, reg);
|
|
|
|
timeout = 1000;
|
|
do {
|
|
if (timeout-- == 0) {
|
|
dev_err(dsi->dev, "PLL failed to stabilize\n");
|
|
return 0;
|
|
}
|
|
reg = exynos_dsi_read(dsi, DSIM_STATUS_REG);
|
|
} while ((reg & DSIM_PLL_STABLE) == 0);
|
|
|
|
return fout;
|
|
}
|
|
|
|
static int exynos_dsi_enable_clock(struct exynos_dsi *dsi)
|
|
{
|
|
unsigned long hs_clk, byte_clk, esc_clk;
|
|
unsigned long esc_div;
|
|
u32 reg;
|
|
|
|
hs_clk = exynos_dsi_set_pll(dsi, dsi->burst_clk_rate);
|
|
if (!hs_clk) {
|
|
dev_err(dsi->dev, "failed to configure DSI PLL\n");
|
|
return -EFAULT;
|
|
}
|
|
|
|
byte_clk = hs_clk / 8;
|
|
esc_div = DIV_ROUND_UP(byte_clk, dsi->esc_clk_rate);
|
|
esc_clk = byte_clk / esc_div;
|
|
|
|
if (esc_clk > 20 * MHZ) {
|
|
++esc_div;
|
|
esc_clk = byte_clk / esc_div;
|
|
}
|
|
|
|
dev_dbg(dsi->dev, "hs_clk = %lu, byte_clk = %lu, esc_clk = %lu\n",
|
|
hs_clk, byte_clk, esc_clk);
|
|
|
|
reg = exynos_dsi_read(dsi, DSIM_CLKCTRL_REG);
|
|
reg &= ~(DSIM_ESC_PRESCALER_MASK | DSIM_LANE_ESC_CLK_EN_CLK
|
|
| DSIM_LANE_ESC_CLK_EN_DATA_MASK | DSIM_PLL_BYPASS
|
|
| DSIM_BYTE_CLK_SRC_MASK);
|
|
reg |= DSIM_ESC_CLKEN | DSIM_BYTE_CLKEN
|
|
| DSIM_ESC_PRESCALER(esc_div)
|
|
| DSIM_LANE_ESC_CLK_EN_CLK
|
|
| DSIM_LANE_ESC_CLK_EN_DATA(BIT(dsi->lanes) - 1)
|
|
| DSIM_BYTE_CLK_SRC(0)
|
|
| DSIM_TX_REQUEST_HSCLK;
|
|
exynos_dsi_write(dsi, DSIM_CLKCTRL_REG, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void exynos_dsi_set_phy_ctrl(struct exynos_dsi *dsi)
|
|
{
|
|
const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
|
|
const unsigned int *reg_values = driver_data->reg_values;
|
|
u32 reg;
|
|
|
|
if (driver_data->has_freqband)
|
|
return;
|
|
|
|
/* B D-PHY: D-PHY Master & Slave Analog Block control */
|
|
reg = reg_values[PHYCTRL_ULPS_EXIT] | reg_values[PHYCTRL_VREG_LP] |
|
|
reg_values[PHYCTRL_SLEW_UP];
|
|
exynos_dsi_write(dsi, DSIM_PHYCTRL_REG, reg);
|
|
|
|
/*
|
|
* T LPX: Transmitted length of any Low-Power state period
|
|
* T HS-EXIT: Time that the transmitter drives LP-11 following a HS
|
|
* burst
|
|
*/
|
|
reg = reg_values[PHYTIMING_LPX] | reg_values[PHYTIMING_HS_EXIT];
|
|
exynos_dsi_write(dsi, DSIM_PHYTIMING_REG, reg);
|
|
|
|
/*
|
|
* T CLK-PREPARE: Time that the transmitter drives the Clock Lane LP-00
|
|
* Line state immediately before the HS-0 Line state starting the
|
|
* HS transmission
|
|
* T CLK-ZERO: Time that the transmitter drives the HS-0 state prior to
|
|
* transmitting the Clock.
|
|
* T CLK_POST: Time that the transmitter continues to send HS clock
|
|
* after the last associated Data Lane has transitioned to LP Mode
|
|
* Interval is defined as the period from the end of T HS-TRAIL to
|
|
* the beginning of T CLK-TRAIL
|
|
* T CLK-TRAIL: Time that the transmitter drives the HS-0 state after
|
|
* the last payload clock bit of a HS transmission burst
|
|
*/
|
|
reg = reg_values[PHYTIMING_CLK_PREPARE] |
|
|
reg_values[PHYTIMING_CLK_ZERO] |
|
|
reg_values[PHYTIMING_CLK_POST] |
|
|
reg_values[PHYTIMING_CLK_TRAIL];
|
|
|
|
exynos_dsi_write(dsi, DSIM_PHYTIMING1_REG, reg);
|
|
|
|
/*
|
|
* T HS-PREPARE: Time that the transmitter drives the Data Lane LP-00
|
|
* Line state immediately before the HS-0 Line state starting the
|
|
* HS transmission
|
|
* T HS-ZERO: Time that the transmitter drives the HS-0 state prior to
|
|
* transmitting the Sync sequence.
|
|
* T HS-TRAIL: Time that the transmitter drives the flipped differential
|
|
* state after last payload data bit of a HS transmission burst
|
|
*/
|
|
reg = reg_values[PHYTIMING_HS_PREPARE] | reg_values[PHYTIMING_HS_ZERO] |
|
|
reg_values[PHYTIMING_HS_TRAIL];
|
|
exynos_dsi_write(dsi, DSIM_PHYTIMING2_REG, reg);
|
|
}
|
|
|
|
static void exynos_dsi_disable_clock(struct exynos_dsi *dsi)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = exynos_dsi_read(dsi, DSIM_CLKCTRL_REG);
|
|
reg &= ~(DSIM_LANE_ESC_CLK_EN_CLK | DSIM_LANE_ESC_CLK_EN_DATA_MASK
|
|
| DSIM_ESC_CLKEN | DSIM_BYTE_CLKEN);
|
|
exynos_dsi_write(dsi, DSIM_CLKCTRL_REG, reg);
|
|
|
|
reg = exynos_dsi_read(dsi, DSIM_PLLCTRL_REG);
|
|
reg &= ~DSIM_PLL_EN;
|
|
exynos_dsi_write(dsi, DSIM_PLLCTRL_REG, reg);
|
|
}
|
|
|
|
static void exynos_dsi_enable_lane(struct exynos_dsi *dsi, u32 lane)
|
|
{
|
|
u32 reg = exynos_dsi_read(dsi, DSIM_CONFIG_REG);
|
|
reg |= (DSIM_NUM_OF_DATA_LANE(dsi->lanes - 1) | DSIM_LANE_EN_CLK |
|
|
DSIM_LANE_EN(lane));
|
|
exynos_dsi_write(dsi, DSIM_CONFIG_REG, reg);
|
|
}
|
|
|
|
static int exynos_dsi_init_link(struct exynos_dsi *dsi)
|
|
{
|
|
const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
|
|
int timeout;
|
|
u32 reg;
|
|
u32 lanes_mask;
|
|
|
|
/* Initialize FIFO pointers */
|
|
reg = exynos_dsi_read(dsi, DSIM_FIFOCTRL_REG);
|
|
reg &= ~0x1f;
|
|
exynos_dsi_write(dsi, DSIM_FIFOCTRL_REG, reg);
|
|
|
|
usleep_range(9000, 11000);
|
|
|
|
reg |= 0x1f;
|
|
exynos_dsi_write(dsi, DSIM_FIFOCTRL_REG, reg);
|
|
usleep_range(9000, 11000);
|
|
|
|
/* DSI configuration */
|
|
reg = 0;
|
|
|
|
/*
|
|
* The first bit of mode_flags specifies display configuration.
|
|
* If this bit is set[= MIPI_DSI_MODE_VIDEO], dsi will support video
|
|
* mode, otherwise it will support command mode.
|
|
*/
|
|
if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
|
|
reg |= DSIM_VIDEO_MODE;
|
|
|
|
/*
|
|
* The user manual describes that following bits are ignored in
|
|
* command mode.
|
|
*/
|
|
if (!(dsi->mode_flags & MIPI_DSI_MODE_VSYNC_FLUSH))
|
|
reg |= DSIM_MFLUSH_VS;
|
|
if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_SYNC_PULSE)
|
|
reg |= DSIM_SYNC_INFORM;
|
|
if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_BURST)
|
|
reg |= DSIM_BURST_MODE;
|
|
if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_AUTO_VERT)
|
|
reg |= DSIM_AUTO_MODE;
|
|
if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO_HSE)
|
|
reg |= DSIM_HSE_MODE;
|
|
if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_HFP))
|
|
reg |= DSIM_HFP_MODE;
|
|
if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_HBP))
|
|
reg |= DSIM_HBP_MODE;
|
|
if (!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO_HSA))
|
|
reg |= DSIM_HSA_MODE;
|
|
}
|
|
|
|
if (!(dsi->mode_flags & MIPI_DSI_MODE_EOT_PACKET))
|
|
reg |= DSIM_EOT_DISABLE;
|
|
|
|
switch (dsi->format) {
|
|
case MIPI_DSI_FMT_RGB888:
|
|
reg |= DSIM_MAIN_PIX_FORMAT_RGB888;
|
|
break;
|
|
case MIPI_DSI_FMT_RGB666:
|
|
reg |= DSIM_MAIN_PIX_FORMAT_RGB666;
|
|
break;
|
|
case MIPI_DSI_FMT_RGB666_PACKED:
|
|
reg |= DSIM_MAIN_PIX_FORMAT_RGB666_P;
|
|
break;
|
|
case MIPI_DSI_FMT_RGB565:
|
|
reg |= DSIM_MAIN_PIX_FORMAT_RGB565;
|
|
break;
|
|
default:
|
|
dev_err(dsi->dev, "invalid pixel format\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Use non-continuous clock mode if the periparal wants and
|
|
* host controller supports
|
|
*
|
|
* In non-continous clock mode, host controller will turn off
|
|
* the HS clock between high-speed transmissions to reduce
|
|
* power consumption.
|
|
*/
|
|
if (driver_data->has_clklane_stop &&
|
|
dsi->mode_flags & MIPI_DSI_CLOCK_NON_CONTINUOUS) {
|
|
reg |= DSIM_CLKLANE_STOP;
|
|
}
|
|
exynos_dsi_write(dsi, DSIM_CONFIG_REG, reg);
|
|
|
|
lanes_mask = BIT(dsi->lanes) - 1;
|
|
exynos_dsi_enable_lane(dsi, lanes_mask);
|
|
|
|
/* Check clock and data lane state are stop state */
|
|
timeout = 100;
|
|
do {
|
|
if (timeout-- == 0) {
|
|
dev_err(dsi->dev, "waiting for bus lanes timed out\n");
|
|
return -EFAULT;
|
|
}
|
|
|
|
reg = exynos_dsi_read(dsi, DSIM_STATUS_REG);
|
|
if ((reg & DSIM_STOP_STATE_DAT(lanes_mask))
|
|
!= DSIM_STOP_STATE_DAT(lanes_mask))
|
|
continue;
|
|
} while (!(reg & (DSIM_STOP_STATE_CLK | DSIM_TX_READY_HS_CLK)));
|
|
|
|
reg = exynos_dsi_read(dsi, DSIM_ESCMODE_REG);
|
|
reg &= ~DSIM_STOP_STATE_CNT_MASK;
|
|
reg |= DSIM_STOP_STATE_CNT(driver_data->reg_values[STOP_STATE_CNT]);
|
|
exynos_dsi_write(dsi, DSIM_ESCMODE_REG, reg);
|
|
|
|
reg = DSIM_BTA_TIMEOUT(0xff) | DSIM_LPDR_TIMEOUT(0xffff);
|
|
exynos_dsi_write(dsi, DSIM_TIMEOUT_REG, reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void exynos_dsi_set_display_mode(struct exynos_dsi *dsi)
|
|
{
|
|
struct videomode *vm = &dsi->vm;
|
|
unsigned int num_bits_resol = dsi->driver_data->num_bits_resol;
|
|
u32 reg;
|
|
|
|
if (dsi->mode_flags & MIPI_DSI_MODE_VIDEO) {
|
|
reg = DSIM_CMD_ALLOW(0xf)
|
|
| DSIM_STABLE_VFP(vm->vfront_porch)
|
|
| DSIM_MAIN_VBP(vm->vback_porch);
|
|
exynos_dsi_write(dsi, DSIM_MVPORCH_REG, reg);
|
|
|
|
reg = DSIM_MAIN_HFP(vm->hfront_porch)
|
|
| DSIM_MAIN_HBP(vm->hback_porch);
|
|
exynos_dsi_write(dsi, DSIM_MHPORCH_REG, reg);
|
|
|
|
reg = DSIM_MAIN_VSA(vm->vsync_len)
|
|
| DSIM_MAIN_HSA(vm->hsync_len);
|
|
exynos_dsi_write(dsi, DSIM_MSYNC_REG, reg);
|
|
}
|
|
reg = DSIM_MAIN_HRESOL(vm->hactive, num_bits_resol) |
|
|
DSIM_MAIN_VRESOL(vm->vactive, num_bits_resol);
|
|
|
|
exynos_dsi_write(dsi, DSIM_MDRESOL_REG, reg);
|
|
|
|
dev_dbg(dsi->dev, "LCD size = %dx%d\n", vm->hactive, vm->vactive);
|
|
}
|
|
|
|
static void exynos_dsi_set_display_enable(struct exynos_dsi *dsi, bool enable)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = exynos_dsi_read(dsi, DSIM_MDRESOL_REG);
|
|
if (enable)
|
|
reg |= DSIM_MAIN_STAND_BY;
|
|
else
|
|
reg &= ~DSIM_MAIN_STAND_BY;
|
|
exynos_dsi_write(dsi, DSIM_MDRESOL_REG, reg);
|
|
}
|
|
|
|
static int exynos_dsi_wait_for_hdr_fifo(struct exynos_dsi *dsi)
|
|
{
|
|
int timeout = 2000;
|
|
|
|
do {
|
|
u32 reg = exynos_dsi_read(dsi, DSIM_FIFOCTRL_REG);
|
|
|
|
if (!(reg & DSIM_SFR_HEADER_FULL))
|
|
return 0;
|
|
|
|
if (!cond_resched())
|
|
usleep_range(950, 1050);
|
|
} while (--timeout);
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static void exynos_dsi_set_cmd_lpm(struct exynos_dsi *dsi, bool lpm)
|
|
{
|
|
u32 v = exynos_dsi_read(dsi, DSIM_ESCMODE_REG);
|
|
|
|
if (lpm)
|
|
v |= DSIM_CMD_LPDT_LP;
|
|
else
|
|
v &= ~DSIM_CMD_LPDT_LP;
|
|
|
|
exynos_dsi_write(dsi, DSIM_ESCMODE_REG, v);
|
|
}
|
|
|
|
static void exynos_dsi_force_bta(struct exynos_dsi *dsi)
|
|
{
|
|
u32 v = exynos_dsi_read(dsi, DSIM_ESCMODE_REG);
|
|
v |= DSIM_FORCE_BTA;
|
|
exynos_dsi_write(dsi, DSIM_ESCMODE_REG, v);
|
|
}
|
|
|
|
static void exynos_dsi_send_to_fifo(struct exynos_dsi *dsi,
|
|
struct exynos_dsi_transfer *xfer)
|
|
{
|
|
struct device *dev = dsi->dev;
|
|
struct mipi_dsi_packet *pkt = &xfer->packet;
|
|
const u8 *payload = pkt->payload + xfer->tx_done;
|
|
u16 length = pkt->payload_length - xfer->tx_done;
|
|
bool first = !xfer->tx_done;
|
|
u32 reg;
|
|
|
|
dev_dbg(dev, "< xfer %pK: tx len %u, done %u, rx len %u, done %u\n",
|
|
xfer, length, xfer->tx_done, xfer->rx_len, xfer->rx_done);
|
|
|
|
if (length > DSI_TX_FIFO_SIZE)
|
|
length = DSI_TX_FIFO_SIZE;
|
|
|
|
xfer->tx_done += length;
|
|
|
|
/* Send payload */
|
|
while (length >= 4) {
|
|
reg = get_unaligned_le32(payload);
|
|
exynos_dsi_write(dsi, DSIM_PAYLOAD_REG, reg);
|
|
payload += 4;
|
|
length -= 4;
|
|
}
|
|
|
|
reg = 0;
|
|
switch (length) {
|
|
case 3:
|
|
reg |= payload[2] << 16;
|
|
/* Fall through */
|
|
case 2:
|
|
reg |= payload[1] << 8;
|
|
/* Fall through */
|
|
case 1:
|
|
reg |= payload[0];
|
|
exynos_dsi_write(dsi, DSIM_PAYLOAD_REG, reg);
|
|
break;
|
|
}
|
|
|
|
/* Send packet header */
|
|
if (!first)
|
|
return;
|
|
|
|
reg = get_unaligned_le32(pkt->header);
|
|
if (exynos_dsi_wait_for_hdr_fifo(dsi)) {
|
|
dev_err(dev, "waiting for header FIFO timed out\n");
|
|
return;
|
|
}
|
|
|
|
if (NEQV(xfer->flags & MIPI_DSI_MSG_USE_LPM,
|
|
dsi->state & DSIM_STATE_CMD_LPM)) {
|
|
exynos_dsi_set_cmd_lpm(dsi, xfer->flags & MIPI_DSI_MSG_USE_LPM);
|
|
dsi->state ^= DSIM_STATE_CMD_LPM;
|
|
}
|
|
|
|
exynos_dsi_write(dsi, DSIM_PKTHDR_REG, reg);
|
|
|
|
if (xfer->flags & MIPI_DSI_MSG_REQ_ACK)
|
|
exynos_dsi_force_bta(dsi);
|
|
}
|
|
|
|
static void exynos_dsi_read_from_fifo(struct exynos_dsi *dsi,
|
|
struct exynos_dsi_transfer *xfer)
|
|
{
|
|
u8 *payload = xfer->rx_payload + xfer->rx_done;
|
|
bool first = !xfer->rx_done;
|
|
struct device *dev = dsi->dev;
|
|
u16 length;
|
|
u32 reg;
|
|
|
|
if (first) {
|
|
reg = exynos_dsi_read(dsi, DSIM_RXFIFO_REG);
|
|
|
|
switch (reg & 0x3f) {
|
|
case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_2BYTE:
|
|
case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_2BYTE:
|
|
if (xfer->rx_len >= 2) {
|
|
payload[1] = reg >> 16;
|
|
++xfer->rx_done;
|
|
}
|
|
/* Fall through */
|
|
case MIPI_DSI_RX_GENERIC_SHORT_READ_RESPONSE_1BYTE:
|
|
case MIPI_DSI_RX_DCS_SHORT_READ_RESPONSE_1BYTE:
|
|
payload[0] = reg >> 8;
|
|
++xfer->rx_done;
|
|
xfer->rx_len = xfer->rx_done;
|
|
xfer->result = 0;
|
|
goto clear_fifo;
|
|
case MIPI_DSI_RX_ACKNOWLEDGE_AND_ERROR_REPORT:
|
|
dev_err(dev, "DSI Error Report: 0x%04x\n",
|
|
(reg >> 8) & 0xffff);
|
|
xfer->result = 0;
|
|
goto clear_fifo;
|
|
}
|
|
|
|
length = (reg >> 8) & 0xffff;
|
|
if (length > xfer->rx_len) {
|
|
dev_err(dev,
|
|
"response too long (%u > %u bytes), stripping\n",
|
|
xfer->rx_len, length);
|
|
length = xfer->rx_len;
|
|
} else if (length < xfer->rx_len)
|
|
xfer->rx_len = length;
|
|
}
|
|
|
|
length = xfer->rx_len - xfer->rx_done;
|
|
xfer->rx_done += length;
|
|
|
|
/* Receive payload */
|
|
while (length >= 4) {
|
|
reg = exynos_dsi_read(dsi, DSIM_RXFIFO_REG);
|
|
payload[0] = (reg >> 0) & 0xff;
|
|
payload[1] = (reg >> 8) & 0xff;
|
|
payload[2] = (reg >> 16) & 0xff;
|
|
payload[3] = (reg >> 24) & 0xff;
|
|
payload += 4;
|
|
length -= 4;
|
|
}
|
|
|
|
if (length) {
|
|
reg = exynos_dsi_read(dsi, DSIM_RXFIFO_REG);
|
|
switch (length) {
|
|
case 3:
|
|
payload[2] = (reg >> 16) & 0xff;
|
|
/* Fall through */
|
|
case 2:
|
|
payload[1] = (reg >> 8) & 0xff;
|
|
/* Fall through */
|
|
case 1:
|
|
payload[0] = reg & 0xff;
|
|
}
|
|
}
|
|
|
|
if (xfer->rx_done == xfer->rx_len)
|
|
xfer->result = 0;
|
|
|
|
clear_fifo:
|
|
length = DSI_RX_FIFO_SIZE / 4;
|
|
do {
|
|
reg = exynos_dsi_read(dsi, DSIM_RXFIFO_REG);
|
|
if (reg == DSI_RX_FIFO_EMPTY)
|
|
break;
|
|
} while (--length);
|
|
}
|
|
|
|
static void exynos_dsi_transfer_start(struct exynos_dsi *dsi)
|
|
{
|
|
unsigned long flags;
|
|
struct exynos_dsi_transfer *xfer;
|
|
bool start = false;
|
|
|
|
again:
|
|
spin_lock_irqsave(&dsi->transfer_lock, flags);
|
|
|
|
if (list_empty(&dsi->transfer_list)) {
|
|
spin_unlock_irqrestore(&dsi->transfer_lock, flags);
|
|
return;
|
|
}
|
|
|
|
xfer = list_first_entry(&dsi->transfer_list,
|
|
struct exynos_dsi_transfer, list);
|
|
|
|
spin_unlock_irqrestore(&dsi->transfer_lock, flags);
|
|
|
|
if (xfer->packet.payload_length &&
|
|
xfer->tx_done == xfer->packet.payload_length)
|
|
/* waiting for RX */
|
|
return;
|
|
|
|
exynos_dsi_send_to_fifo(dsi, xfer);
|
|
|
|
if (xfer->packet.payload_length || xfer->rx_len)
|
|
return;
|
|
|
|
xfer->result = 0;
|
|
complete(&xfer->completed);
|
|
|
|
spin_lock_irqsave(&dsi->transfer_lock, flags);
|
|
|
|
list_del_init(&xfer->list);
|
|
start = !list_empty(&dsi->transfer_list);
|
|
|
|
spin_unlock_irqrestore(&dsi->transfer_lock, flags);
|
|
|
|
if (start)
|
|
goto again;
|
|
}
|
|
|
|
static bool exynos_dsi_transfer_finish(struct exynos_dsi *dsi)
|
|
{
|
|
struct exynos_dsi_transfer *xfer;
|
|
unsigned long flags;
|
|
bool start = true;
|
|
|
|
spin_lock_irqsave(&dsi->transfer_lock, flags);
|
|
|
|
if (list_empty(&dsi->transfer_list)) {
|
|
spin_unlock_irqrestore(&dsi->transfer_lock, flags);
|
|
return false;
|
|
}
|
|
|
|
xfer = list_first_entry(&dsi->transfer_list,
|
|
struct exynos_dsi_transfer, list);
|
|
|
|
spin_unlock_irqrestore(&dsi->transfer_lock, flags);
|
|
|
|
dev_dbg(dsi->dev,
|
|
"> xfer %pK, tx_len %zu, tx_done %u, rx_len %u, rx_done %u\n",
|
|
xfer, xfer->packet.payload_length, xfer->tx_done, xfer->rx_len,
|
|
xfer->rx_done);
|
|
|
|
if (xfer->tx_done != xfer->packet.payload_length)
|
|
return true;
|
|
|
|
if (xfer->rx_done != xfer->rx_len)
|
|
exynos_dsi_read_from_fifo(dsi, xfer);
|
|
|
|
if (xfer->rx_done != xfer->rx_len)
|
|
return true;
|
|
|
|
spin_lock_irqsave(&dsi->transfer_lock, flags);
|
|
|
|
list_del_init(&xfer->list);
|
|
start = !list_empty(&dsi->transfer_list);
|
|
|
|
spin_unlock_irqrestore(&dsi->transfer_lock, flags);
|
|
|
|
if (!xfer->rx_len)
|
|
xfer->result = 0;
|
|
complete(&xfer->completed);
|
|
|
|
return start;
|
|
}
|
|
|
|
static void exynos_dsi_remove_transfer(struct exynos_dsi *dsi,
|
|
struct exynos_dsi_transfer *xfer)
|
|
{
|
|
unsigned long flags;
|
|
bool start;
|
|
|
|
spin_lock_irqsave(&dsi->transfer_lock, flags);
|
|
|
|
if (!list_empty(&dsi->transfer_list) &&
|
|
xfer == list_first_entry(&dsi->transfer_list,
|
|
struct exynos_dsi_transfer, list)) {
|
|
list_del_init(&xfer->list);
|
|
start = !list_empty(&dsi->transfer_list);
|
|
spin_unlock_irqrestore(&dsi->transfer_lock, flags);
|
|
if (start)
|
|
exynos_dsi_transfer_start(dsi);
|
|
return;
|
|
}
|
|
|
|
list_del_init(&xfer->list);
|
|
|
|
spin_unlock_irqrestore(&dsi->transfer_lock, flags);
|
|
}
|
|
|
|
static int exynos_dsi_transfer(struct exynos_dsi *dsi,
|
|
struct exynos_dsi_transfer *xfer)
|
|
{
|
|
unsigned long flags;
|
|
bool stopped;
|
|
|
|
xfer->tx_done = 0;
|
|
xfer->rx_done = 0;
|
|
xfer->result = -ETIMEDOUT;
|
|
init_completion(&xfer->completed);
|
|
|
|
spin_lock_irqsave(&dsi->transfer_lock, flags);
|
|
|
|
stopped = list_empty(&dsi->transfer_list);
|
|
list_add_tail(&xfer->list, &dsi->transfer_list);
|
|
|
|
spin_unlock_irqrestore(&dsi->transfer_lock, flags);
|
|
|
|
if (stopped)
|
|
exynos_dsi_transfer_start(dsi);
|
|
|
|
wait_for_completion_timeout(&xfer->completed,
|
|
msecs_to_jiffies(DSI_XFER_TIMEOUT_MS));
|
|
if (xfer->result == -ETIMEDOUT) {
|
|
struct mipi_dsi_packet *pkt = &xfer->packet;
|
|
exynos_dsi_remove_transfer(dsi, xfer);
|
|
dev_err(dsi->dev, "xfer timed out: %*ph %*ph\n", 4, pkt->header,
|
|
(int)pkt->payload_length, pkt->payload);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* Also covers hardware timeout condition */
|
|
return xfer->result;
|
|
}
|
|
|
|
static irqreturn_t exynos_dsi_irq(int irq, void *dev_id)
|
|
{
|
|
struct exynos_dsi *dsi = dev_id;
|
|
u32 status;
|
|
|
|
status = exynos_dsi_read(dsi, DSIM_INTSRC_REG);
|
|
if (!status) {
|
|
static unsigned long int j;
|
|
if (printk_timed_ratelimit(&j, 500))
|
|
dev_warn(dsi->dev, "spurious interrupt\n");
|
|
return IRQ_HANDLED;
|
|
}
|
|
exynos_dsi_write(dsi, DSIM_INTSRC_REG, status);
|
|
|
|
if (status & DSIM_INT_SW_RST_RELEASE) {
|
|
u32 mask = ~(DSIM_INT_RX_DONE | DSIM_INT_SFR_FIFO_EMPTY |
|
|
DSIM_INT_SFR_HDR_FIFO_EMPTY | DSIM_INT_FRAME_DONE |
|
|
DSIM_INT_RX_ECC_ERR | DSIM_INT_SW_RST_RELEASE);
|
|
exynos_dsi_write(dsi, DSIM_INTMSK_REG, mask);
|
|
complete(&dsi->completed);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (!(status & (DSIM_INT_RX_DONE | DSIM_INT_SFR_FIFO_EMPTY |
|
|
DSIM_INT_FRAME_DONE | DSIM_INT_PLL_STABLE)))
|
|
return IRQ_HANDLED;
|
|
|
|
if (exynos_dsi_transfer_finish(dsi))
|
|
exynos_dsi_transfer_start(dsi);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t exynos_dsi_te_irq_handler(int irq, void *dev_id)
|
|
{
|
|
struct exynos_dsi *dsi = (struct exynos_dsi *)dev_id;
|
|
struct drm_encoder *encoder = &dsi->encoder;
|
|
|
|
if (dsi->state & DSIM_STATE_VIDOUT_AVAILABLE)
|
|
exynos_drm_crtc_te_handler(encoder->crtc);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void exynos_dsi_enable_irq(struct exynos_dsi *dsi)
|
|
{
|
|
enable_irq(dsi->irq);
|
|
|
|
if (gpio_is_valid(dsi->te_gpio))
|
|
enable_irq(gpio_to_irq(dsi->te_gpio));
|
|
}
|
|
|
|
static void exynos_dsi_disable_irq(struct exynos_dsi *dsi)
|
|
{
|
|
if (gpio_is_valid(dsi->te_gpio))
|
|
disable_irq(gpio_to_irq(dsi->te_gpio));
|
|
|
|
disable_irq(dsi->irq);
|
|
}
|
|
|
|
static int exynos_dsi_init(struct exynos_dsi *dsi)
|
|
{
|
|
const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
|
|
|
|
exynos_dsi_reset(dsi);
|
|
exynos_dsi_enable_irq(dsi);
|
|
|
|
if (driver_data->reg_values[RESET_TYPE] == DSIM_FUNCRST)
|
|
exynos_dsi_enable_lane(dsi, BIT(dsi->lanes) - 1);
|
|
|
|
exynos_dsi_enable_clock(dsi);
|
|
if (driver_data->wait_for_reset)
|
|
exynos_dsi_wait_for_reset(dsi);
|
|
exynos_dsi_set_phy_ctrl(dsi);
|
|
exynos_dsi_init_link(dsi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int exynos_dsi_register_te_irq(struct exynos_dsi *dsi,
|
|
struct device *panel)
|
|
{
|
|
int ret;
|
|
int te_gpio_irq;
|
|
|
|
dsi->te_gpio = of_get_named_gpio(panel->of_node, "te-gpios", 0);
|
|
if (dsi->te_gpio == -ENOENT)
|
|
return 0;
|
|
|
|
if (!gpio_is_valid(dsi->te_gpio)) {
|
|
ret = dsi->te_gpio;
|
|
dev_err(dsi->dev, "cannot get te-gpios, %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
ret = gpio_request(dsi->te_gpio, "te_gpio");
|
|
if (ret) {
|
|
dev_err(dsi->dev, "gpio request failed with %d\n", ret);
|
|
goto out;
|
|
}
|
|
|
|
te_gpio_irq = gpio_to_irq(dsi->te_gpio);
|
|
irq_set_status_flags(te_gpio_irq, IRQ_NOAUTOEN);
|
|
|
|
ret = request_threaded_irq(te_gpio_irq, exynos_dsi_te_irq_handler, NULL,
|
|
IRQF_TRIGGER_RISING, "TE", dsi);
|
|
if (ret) {
|
|
dev_err(dsi->dev, "request interrupt failed with %d\n", ret);
|
|
gpio_free(dsi->te_gpio);
|
|
goto out;
|
|
}
|
|
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static void exynos_dsi_unregister_te_irq(struct exynos_dsi *dsi)
|
|
{
|
|
if (gpio_is_valid(dsi->te_gpio)) {
|
|
free_irq(gpio_to_irq(dsi->te_gpio), dsi);
|
|
gpio_free(dsi->te_gpio);
|
|
dsi->te_gpio = -ENOENT;
|
|
}
|
|
}
|
|
|
|
static void exynos_dsi_enable(struct drm_encoder *encoder)
|
|
{
|
|
struct exynos_dsi *dsi = encoder_to_dsi(encoder);
|
|
int ret;
|
|
|
|
if (dsi->state & DSIM_STATE_ENABLED)
|
|
return;
|
|
|
|
pm_runtime_get_sync(dsi->dev);
|
|
|
|
dsi->state |= DSIM_STATE_ENABLED;
|
|
|
|
ret = drm_panel_prepare(dsi->panel);
|
|
if (ret < 0) {
|
|
dsi->state &= ~DSIM_STATE_ENABLED;
|
|
pm_runtime_put_sync(dsi->dev);
|
|
return;
|
|
}
|
|
|
|
exynos_dsi_set_display_mode(dsi);
|
|
exynos_dsi_set_display_enable(dsi, true);
|
|
|
|
ret = drm_panel_enable(dsi->panel);
|
|
if (ret < 0) {
|
|
dsi->state &= ~DSIM_STATE_ENABLED;
|
|
exynos_dsi_set_display_enable(dsi, false);
|
|
drm_panel_unprepare(dsi->panel);
|
|
pm_runtime_put_sync(dsi->dev);
|
|
return;
|
|
}
|
|
|
|
dsi->state |= DSIM_STATE_VIDOUT_AVAILABLE;
|
|
}
|
|
|
|
static void exynos_dsi_disable(struct drm_encoder *encoder)
|
|
{
|
|
struct exynos_dsi *dsi = encoder_to_dsi(encoder);
|
|
|
|
if (!(dsi->state & DSIM_STATE_ENABLED))
|
|
return;
|
|
|
|
dsi->state &= ~DSIM_STATE_VIDOUT_AVAILABLE;
|
|
|
|
drm_panel_disable(dsi->panel);
|
|
exynos_dsi_set_display_enable(dsi, false);
|
|
drm_panel_unprepare(dsi->panel);
|
|
|
|
dsi->state &= ~DSIM_STATE_ENABLED;
|
|
|
|
pm_runtime_put_sync(dsi->dev);
|
|
}
|
|
|
|
static enum drm_connector_status
|
|
exynos_dsi_detect(struct drm_connector *connector, bool force)
|
|
{
|
|
return connector->status;
|
|
}
|
|
|
|
static void exynos_dsi_connector_destroy(struct drm_connector *connector)
|
|
{
|
|
drm_connector_unregister(connector);
|
|
drm_connector_cleanup(connector);
|
|
connector->dev = NULL;
|
|
}
|
|
|
|
static const struct drm_connector_funcs exynos_dsi_connector_funcs = {
|
|
.detect = exynos_dsi_detect,
|
|
.fill_modes = drm_helper_probe_single_connector_modes,
|
|
.destroy = exynos_dsi_connector_destroy,
|
|
.reset = drm_atomic_helper_connector_reset,
|
|
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
|
|
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
|
|
};
|
|
|
|
static int exynos_dsi_get_modes(struct drm_connector *connector)
|
|
{
|
|
struct exynos_dsi *dsi = connector_to_dsi(connector);
|
|
|
|
if (dsi->panel)
|
|
return dsi->panel->funcs->get_modes(dsi->panel);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct drm_connector_helper_funcs exynos_dsi_connector_helper_funcs = {
|
|
.get_modes = exynos_dsi_get_modes,
|
|
};
|
|
|
|
static int exynos_dsi_create_connector(struct drm_encoder *encoder)
|
|
{
|
|
struct exynos_dsi *dsi = encoder_to_dsi(encoder);
|
|
struct drm_connector *connector = &dsi->connector;
|
|
int ret;
|
|
|
|
connector->polled = DRM_CONNECTOR_POLL_HPD;
|
|
|
|
ret = drm_connector_init(encoder->dev, connector,
|
|
&exynos_dsi_connector_funcs,
|
|
DRM_MODE_CONNECTOR_DSI);
|
|
if (ret) {
|
|
DRM_ERROR("Failed to initialize connector with drm\n");
|
|
return ret;
|
|
}
|
|
|
|
connector->status = connector_status_disconnected;
|
|
drm_connector_helper_add(connector, &exynos_dsi_connector_helper_funcs);
|
|
drm_mode_connector_attach_encoder(connector, encoder);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void exynos_dsi_mode_set(struct drm_encoder *encoder,
|
|
struct drm_display_mode *mode,
|
|
struct drm_display_mode *adjusted_mode)
|
|
{
|
|
struct exynos_dsi *dsi = encoder_to_dsi(encoder);
|
|
struct videomode *vm = &dsi->vm;
|
|
struct drm_display_mode *m = adjusted_mode;
|
|
|
|
vm->hactive = m->hdisplay;
|
|
vm->vactive = m->vdisplay;
|
|
vm->vfront_porch = m->vsync_start - m->vdisplay;
|
|
vm->vback_porch = m->vtotal - m->vsync_end;
|
|
vm->vsync_len = m->vsync_end - m->vsync_start;
|
|
vm->hfront_porch = m->hsync_start - m->hdisplay;
|
|
vm->hback_porch = m->htotal - m->hsync_end;
|
|
vm->hsync_len = m->hsync_end - m->hsync_start;
|
|
}
|
|
|
|
static const struct drm_encoder_helper_funcs exynos_dsi_encoder_helper_funcs = {
|
|
.mode_set = exynos_dsi_mode_set,
|
|
.enable = exynos_dsi_enable,
|
|
.disable = exynos_dsi_disable,
|
|
};
|
|
|
|
static const struct drm_encoder_funcs exynos_dsi_encoder_funcs = {
|
|
.destroy = drm_encoder_cleanup,
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, exynos_dsi_of_match);
|
|
|
|
static int exynos_dsi_host_attach(struct mipi_dsi_host *host,
|
|
struct mipi_dsi_device *device)
|
|
{
|
|
struct exynos_dsi *dsi = host_to_dsi(host);
|
|
struct drm_device *drm = dsi->connector.dev;
|
|
|
|
/*
|
|
* This is a temporary solution and should be made by more generic way.
|
|
*
|
|
* If attached panel device is for command mode one, dsi should register
|
|
* TE interrupt handler.
|
|
*/
|
|
if (!(device->mode_flags & MIPI_DSI_MODE_VIDEO)) {
|
|
int ret = exynos_dsi_register_te_irq(dsi, &device->dev);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
mutex_lock(&drm->mode_config.mutex);
|
|
|
|
dsi->lanes = device->lanes;
|
|
dsi->format = device->format;
|
|
dsi->mode_flags = device->mode_flags;
|
|
dsi->panel = of_drm_find_panel(device->dev.of_node);
|
|
if (dsi->panel) {
|
|
drm_panel_attach(dsi->panel, &dsi->connector);
|
|
dsi->connector.status = connector_status_connected;
|
|
}
|
|
exynos_drm_crtc_get_by_type(drm, EXYNOS_DISPLAY_TYPE_LCD)->i80_mode =
|
|
!(dsi->mode_flags & MIPI_DSI_MODE_VIDEO);
|
|
|
|
mutex_unlock(&drm->mode_config.mutex);
|
|
|
|
if (drm->mode_config.poll_enabled)
|
|
drm_kms_helper_hotplug_event(drm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int exynos_dsi_host_detach(struct mipi_dsi_host *host,
|
|
struct mipi_dsi_device *device)
|
|
{
|
|
struct exynos_dsi *dsi = host_to_dsi(host);
|
|
struct drm_device *drm = dsi->connector.dev;
|
|
|
|
mutex_lock(&drm->mode_config.mutex);
|
|
|
|
if (dsi->panel) {
|
|
exynos_dsi_disable(&dsi->encoder);
|
|
drm_panel_detach(dsi->panel);
|
|
dsi->panel = NULL;
|
|
dsi->connector.status = connector_status_disconnected;
|
|
}
|
|
|
|
mutex_unlock(&drm->mode_config.mutex);
|
|
|
|
if (drm->mode_config.poll_enabled)
|
|
drm_kms_helper_hotplug_event(drm);
|
|
|
|
exynos_dsi_unregister_te_irq(dsi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t exynos_dsi_host_transfer(struct mipi_dsi_host *host,
|
|
const struct mipi_dsi_msg *msg)
|
|
{
|
|
struct exynos_dsi *dsi = host_to_dsi(host);
|
|
struct exynos_dsi_transfer xfer;
|
|
int ret;
|
|
|
|
if (!(dsi->state & DSIM_STATE_ENABLED))
|
|
return -EINVAL;
|
|
|
|
if (!(dsi->state & DSIM_STATE_INITIALIZED)) {
|
|
ret = exynos_dsi_init(dsi);
|
|
if (ret)
|
|
return ret;
|
|
dsi->state |= DSIM_STATE_INITIALIZED;
|
|
}
|
|
|
|
ret = mipi_dsi_create_packet(&xfer.packet, msg);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
xfer.rx_len = msg->rx_len;
|
|
xfer.rx_payload = msg->rx_buf;
|
|
xfer.flags = msg->flags;
|
|
|
|
ret = exynos_dsi_transfer(dsi, &xfer);
|
|
return (ret < 0) ? ret : xfer.rx_done;
|
|
}
|
|
|
|
static const struct mipi_dsi_host_ops exynos_dsi_ops = {
|
|
.attach = exynos_dsi_host_attach,
|
|
.detach = exynos_dsi_host_detach,
|
|
.transfer = exynos_dsi_host_transfer,
|
|
};
|
|
|
|
static int exynos_dsi_of_read_u32(const struct device_node *np,
|
|
const char *propname, u32 *out_value)
|
|
{
|
|
int ret = of_property_read_u32(np, propname, out_value);
|
|
|
|
if (ret < 0)
|
|
pr_err("%pOF: failed to get '%s' property\n", np, propname);
|
|
|
|
return ret;
|
|
}
|
|
|
|
enum {
|
|
DSI_PORT_IN,
|
|
DSI_PORT_OUT
|
|
};
|
|
|
|
static int exynos_dsi_parse_dt(struct exynos_dsi *dsi)
|
|
{
|
|
struct device *dev = dsi->dev;
|
|
struct device_node *node = dev->of_node;
|
|
int ret;
|
|
|
|
ret = exynos_dsi_of_read_u32(node, "samsung,pll-clock-frequency",
|
|
&dsi->pll_clk_rate);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = exynos_dsi_of_read_u32(node, "samsung,burst-clock-frequency",
|
|
&dsi->burst_clk_rate);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = exynos_dsi_of_read_u32(node, "samsung,esc-clock-frequency",
|
|
&dsi->esc_clk_rate);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
dsi->bridge_node = of_graph_get_remote_node(node, DSI_PORT_IN, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int exynos_dsi_bind(struct device *dev, struct device *master,
|
|
void *data)
|
|
{
|
|
struct drm_encoder *encoder = dev_get_drvdata(dev);
|
|
struct exynos_dsi *dsi = encoder_to_dsi(encoder);
|
|
struct drm_device *drm_dev = data;
|
|
struct drm_bridge *bridge;
|
|
int ret;
|
|
|
|
drm_encoder_init(drm_dev, encoder, &exynos_dsi_encoder_funcs,
|
|
DRM_MODE_ENCODER_TMDS, NULL);
|
|
|
|
drm_encoder_helper_add(encoder, &exynos_dsi_encoder_helper_funcs);
|
|
|
|
ret = exynos_drm_set_possible_crtcs(encoder, EXYNOS_DISPLAY_TYPE_LCD);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = exynos_dsi_create_connector(encoder);
|
|
if (ret) {
|
|
DRM_ERROR("failed to create connector ret = %d\n", ret);
|
|
drm_encoder_cleanup(encoder);
|
|
return ret;
|
|
}
|
|
|
|
if (dsi->bridge_node) {
|
|
bridge = of_drm_find_bridge(dsi->bridge_node);
|
|
if (bridge)
|
|
drm_bridge_attach(encoder, bridge, NULL);
|
|
}
|
|
|
|
return mipi_dsi_host_register(&dsi->dsi_host);
|
|
}
|
|
|
|
static void exynos_dsi_unbind(struct device *dev, struct device *master,
|
|
void *data)
|
|
{
|
|
struct drm_encoder *encoder = dev_get_drvdata(dev);
|
|
struct exynos_dsi *dsi = encoder_to_dsi(encoder);
|
|
|
|
exynos_dsi_disable(encoder);
|
|
|
|
mipi_dsi_host_unregister(&dsi->dsi_host);
|
|
}
|
|
|
|
static const struct component_ops exynos_dsi_component_ops = {
|
|
.bind = exynos_dsi_bind,
|
|
.unbind = exynos_dsi_unbind,
|
|
};
|
|
|
|
static int exynos_dsi_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct resource *res;
|
|
struct exynos_dsi *dsi;
|
|
int ret, i;
|
|
|
|
dsi = devm_kzalloc(dev, sizeof(*dsi), GFP_KERNEL);
|
|
if (!dsi)
|
|
return -ENOMEM;
|
|
|
|
/* To be checked as invalid one */
|
|
dsi->te_gpio = -ENOENT;
|
|
|
|
init_completion(&dsi->completed);
|
|
spin_lock_init(&dsi->transfer_lock);
|
|
INIT_LIST_HEAD(&dsi->transfer_list);
|
|
|
|
dsi->dsi_host.ops = &exynos_dsi_ops;
|
|
dsi->dsi_host.dev = dev;
|
|
|
|
dsi->dev = dev;
|
|
dsi->driver_data = of_device_get_match_data(dev);
|
|
|
|
ret = exynos_dsi_parse_dt(dsi);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dsi->supplies[0].supply = "vddcore";
|
|
dsi->supplies[1].supply = "vddio";
|
|
ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(dsi->supplies),
|
|
dsi->supplies);
|
|
if (ret) {
|
|
dev_info(dev, "failed to get regulators: %d\n", ret);
|
|
return -EPROBE_DEFER;
|
|
}
|
|
|
|
dsi->clks = devm_kzalloc(dev,
|
|
sizeof(*dsi->clks) * dsi->driver_data->num_clks,
|
|
GFP_KERNEL);
|
|
if (!dsi->clks)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < dsi->driver_data->num_clks; i++) {
|
|
dsi->clks[i] = devm_clk_get(dev, clk_names[i]);
|
|
if (IS_ERR(dsi->clks[i])) {
|
|
if (strcmp(clk_names[i], "sclk_mipi") == 0) {
|
|
strcpy(clk_names[i], OLD_SCLK_MIPI_CLK_NAME);
|
|
i--;
|
|
continue;
|
|
}
|
|
|
|
dev_info(dev, "failed to get the clock: %s\n",
|
|
clk_names[i]);
|
|
return PTR_ERR(dsi->clks[i]);
|
|
}
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
dsi->reg_base = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(dsi->reg_base)) {
|
|
dev_err(dev, "failed to remap io region\n");
|
|
return PTR_ERR(dsi->reg_base);
|
|
}
|
|
|
|
dsi->phy = devm_phy_get(dev, "dsim");
|
|
if (IS_ERR(dsi->phy)) {
|
|
dev_info(dev, "failed to get dsim phy\n");
|
|
return PTR_ERR(dsi->phy);
|
|
}
|
|
|
|
dsi->irq = platform_get_irq(pdev, 0);
|
|
if (dsi->irq < 0) {
|
|
dev_err(dev, "failed to request dsi irq resource\n");
|
|
return dsi->irq;
|
|
}
|
|
|
|
irq_set_status_flags(dsi->irq, IRQ_NOAUTOEN);
|
|
ret = devm_request_threaded_irq(dev, dsi->irq, NULL,
|
|
exynos_dsi_irq, IRQF_ONESHOT,
|
|
dev_name(dev), dsi);
|
|
if (ret) {
|
|
dev_err(dev, "failed to request dsi irq\n");
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, &dsi->encoder);
|
|
|
|
pm_runtime_enable(dev);
|
|
|
|
return component_add(dev, &exynos_dsi_component_ops);
|
|
}
|
|
|
|
static int exynos_dsi_remove(struct platform_device *pdev)
|
|
{
|
|
struct exynos_dsi *dsi = platform_get_drvdata(pdev);
|
|
|
|
of_node_put(dsi->bridge_node);
|
|
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
component_del(&pdev->dev, &exynos_dsi_component_ops);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused exynos_dsi_suspend(struct device *dev)
|
|
{
|
|
struct drm_encoder *encoder = dev_get_drvdata(dev);
|
|
struct exynos_dsi *dsi = encoder_to_dsi(encoder);
|
|
const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
|
|
int ret, i;
|
|
|
|
usleep_range(10000, 20000);
|
|
|
|
if (dsi->state & DSIM_STATE_INITIALIZED) {
|
|
dsi->state &= ~DSIM_STATE_INITIALIZED;
|
|
|
|
exynos_dsi_disable_clock(dsi);
|
|
|
|
exynos_dsi_disable_irq(dsi);
|
|
}
|
|
|
|
dsi->state &= ~DSIM_STATE_CMD_LPM;
|
|
|
|
phy_power_off(dsi->phy);
|
|
|
|
for (i = driver_data->num_clks - 1; i > -1; i--)
|
|
clk_disable_unprepare(dsi->clks[i]);
|
|
|
|
ret = regulator_bulk_disable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
|
|
if (ret < 0)
|
|
dev_err(dsi->dev, "cannot disable regulators %d\n", ret);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused exynos_dsi_resume(struct device *dev)
|
|
{
|
|
struct drm_encoder *encoder = dev_get_drvdata(dev);
|
|
struct exynos_dsi *dsi = encoder_to_dsi(encoder);
|
|
const struct exynos_dsi_driver_data *driver_data = dsi->driver_data;
|
|
int ret, i;
|
|
|
|
ret = regulator_bulk_enable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
|
|
if (ret < 0) {
|
|
dev_err(dsi->dev, "cannot enable regulators %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < driver_data->num_clks; i++) {
|
|
ret = clk_prepare_enable(dsi->clks[i]);
|
|
if (ret < 0)
|
|
goto err_clk;
|
|
}
|
|
|
|
ret = phy_power_on(dsi->phy);
|
|
if (ret < 0) {
|
|
dev_err(dsi->dev, "cannot enable phy %d\n", ret);
|
|
goto err_clk;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_clk:
|
|
while (--i > -1)
|
|
clk_disable_unprepare(dsi->clks[i]);
|
|
regulator_bulk_disable(ARRAY_SIZE(dsi->supplies), dsi->supplies);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct dev_pm_ops exynos_dsi_pm_ops = {
|
|
SET_RUNTIME_PM_OPS(exynos_dsi_suspend, exynos_dsi_resume, NULL)
|
|
};
|
|
|
|
struct platform_driver dsi_driver = {
|
|
.probe = exynos_dsi_probe,
|
|
.remove = exynos_dsi_remove,
|
|
.driver = {
|
|
.name = "exynos-dsi",
|
|
.owner = THIS_MODULE,
|
|
.pm = &exynos_dsi_pm_ops,
|
|
.of_match_table = exynos_dsi_of_match,
|
|
},
|
|
};
|
|
|
|
MODULE_AUTHOR("Tomasz Figa <t.figa@samsung.com>");
|
|
MODULE_AUTHOR("Andrzej Hajda <a.hajda@samsung.com>");
|
|
MODULE_DESCRIPTION("Samsung SoC MIPI DSI Master");
|
|
MODULE_LICENSE("GPL v2");
|