linux_dsm_epyc7002/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
Stephen Boyd 9a61b3a39a ARM: dts: qcom: ipq8064-ap148: Use stdout-path
Use stdout-path so that we don't have to put the console on the
kernel command line.

Cc: Mathieu Olivari <mathieu@codeaurora.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2015-09-09 14:57:32 -05:00

102 lines
1.6 KiB
Plaintext

#include "qcom-ipq8064-v1.0.dtsi"
/ {
model = "Qualcomm IPQ8064/AP148";
compatible = "qcom,ipq8064-ap148", "qcom,ipq8064";
aliases {
serial0 = &gsbi4_serial;
};
chosen {
stdout-path = "serial0:115200n8";
};
reserved-memory {
#address-cells = <1>;
#size-cells = <1>;
ranges;
rsvd@41200000 {
reg = <0x41200000 0x300000>;
no-map;
};
};
soc {
pinmux@800000 {
i2c4_pins: i2c4_pinmux {
pins = "gpio12", "gpio13";
function = "gsbi4";
bias-disable;
};
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
function = "gsbi5";
drive-strength = <10>;
bias-none;
};
};
};
gsbi@16300000 {
qcom,mode = <GSBI_PROT_I2C_UART>;
status = "ok";
serial@16340000 {
status = "ok";
};
i2c4: i2c@16380000 {
status = "ok";
clock-frequency = <200000>;
pinctrl-0 = <&i2c4_pins>;
pinctrl-names = "default";
};
};
gsbi5: gsbi@1a200000 {
qcom,mode = <GSBI_PROT_SPI>;
status = "ok";
spi4: spi@1a280000 {
status = "ok";
spi-max-frequency = <50000000>;
pinctrl-0 = <&spi_pins>;
pinctrl-names = "default";
cs-gpios = <&qcom_pinmux 20 0>;
flash: m25p80@0 {
compatible = "s25fl256s1";
#address-cells = <1>;
#size-cells = <1>;
spi-max-frequency = <50000000>;
reg = <0>;
partition@0 {
label = "rootfs";
reg = <0x0 0x1000000>;
};
partition@1 {
label = "scratch";
reg = <0x1000000 0x1000000>;
};
};
};
};
sata-phy@1b400000 {
status = "ok";
};
sata@29000000 {
status = "ok";
};
};
};