linux_dsm_epyc7002/drivers/net/wireless/ath/wil6210/pcie_bus.c
Jingoo Han 3f06534183 wireless: wil6210: remove unnecessary pci_set_drvdata()
The driver core clears the driver data to NULL after device_release
or on probe failure. Thus, it is not needed to manually clear the
device driver data to NULL.

Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-09-26 15:13:43 -04:00

220 lines
5.1 KiB
C

/*
* Copyright (c) 2012 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#include <linux/module.h>
#include <linux/debugfs.h>
#include <linux/pci.h>
#include <linux/moduleparam.h>
#include "wil6210.h"
static int use_msi = 1;
module_param(use_msi, int, S_IRUGO);
MODULE_PARM_DESC(use_msi,
" Use MSI interrupt: "
"0 - don't, 1 - (default) - single, or 3");
/* Bus ops */
static int wil_if_pcie_enable(struct wil6210_priv *wil)
{
struct pci_dev *pdev = wil->pdev;
int rc;
pci_set_master(pdev);
/*
* how many MSI interrupts to request?
*/
switch (use_msi) {
case 3:
case 1:
case 0:
break;
default:
wil_err(wil, "Invalid use_msi=%d, default to 1\n",
use_msi);
use_msi = 1;
}
wil->n_msi = use_msi;
if (wil->n_msi) {
wil_dbg_misc(wil, "Setup %d MSI interrupts\n", use_msi);
rc = pci_enable_msi_block(pdev, wil->n_msi);
if (rc && (wil->n_msi == 3)) {
wil_err(wil, "3 MSI mode failed, try 1 MSI\n");
wil->n_msi = 1;
rc = pci_enable_msi_block(pdev, wil->n_msi);
}
if (rc) {
wil_err(wil, "pci_enable_msi failed, use INTx\n");
wil->n_msi = 0;
}
} else {
wil_dbg_misc(wil, "MSI interrupts disabled, use INTx\n");
}
rc = wil6210_init_irq(wil, pdev->irq);
if (rc)
goto stop_master;
/* need reset here to obtain MAC */
rc = wil_reset(wil);
if (rc)
goto release_irq;
return 0;
release_irq:
wil6210_fini_irq(wil, pdev->irq);
/* safe to call if no MSI */
pci_disable_msi(pdev);
stop_master:
pci_clear_master(pdev);
return rc;
}
static int wil_if_pcie_disable(struct wil6210_priv *wil)
{
struct pci_dev *pdev = wil->pdev;
pci_clear_master(pdev);
/* disable and release IRQ */
wil6210_fini_irq(wil, pdev->irq);
/* safe to call if no MSI */
pci_disable_msi(pdev);
/* TODO: disable HW */
return 0;
}
static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
{
struct wil6210_priv *wil;
struct device *dev = &pdev->dev;
void __iomem *csr;
int rc;
/* check HW */
dev_info(&pdev->dev, WIL_NAME " device found [%04x:%04x] (rev %x)\n",
(int)pdev->vendor, (int)pdev->device, (int)pdev->revision);
if (pci_resource_len(pdev, 0) != WIL6210_MEM_SIZE) {
dev_err(&pdev->dev, "Not " WIL_NAME "? "
"BAR0 size is %lu while expecting %lu\n",
(ulong)pci_resource_len(pdev, 0), WIL6210_MEM_SIZE);
return -ENODEV;
}
rc = pci_enable_device(pdev);
if (rc) {
dev_err(&pdev->dev, "pci_enable_device failed\n");
return -ENODEV;
}
/* rollback to err_disable_pdev */
rc = pci_request_region(pdev, 0, WIL_NAME);
if (rc) {
dev_err(&pdev->dev, "pci_request_region failed\n");
goto err_disable_pdev;
}
/* rollback to err_release_reg */
csr = pci_ioremap_bar(pdev, 0);
if (!csr) {
dev_err(&pdev->dev, "pci_ioremap_bar failed\n");
rc = -ENODEV;
goto err_release_reg;
}
/* rollback to err_iounmap */
dev_info(&pdev->dev, "CSR at %pR -> %p\n", &pdev->resource[0], csr);
wil = wil_if_alloc(dev, csr);
if (IS_ERR(wil)) {
rc = (int)PTR_ERR(wil);
dev_err(dev, "wil_if_alloc failed: %d\n", rc);
goto err_iounmap;
}
/* rollback to if_free */
pci_set_drvdata(pdev, wil);
wil->pdev = pdev;
/* FW should raise IRQ when ready */
rc = wil_if_pcie_enable(wil);
if (rc) {
wil_err(wil, "Enable device failed\n");
goto if_free;
}
/* rollback to bus_disable */
rc = wil_if_add(wil);
if (rc) {
wil_err(wil, "wil_if_add failed: %d\n", rc);
goto bus_disable;
}
wil6210_debugfs_init(wil);
/* check FW is alive */
wmi_echo(wil);
return 0;
bus_disable:
wil_if_pcie_disable(wil);
if_free:
wil_if_free(wil);
err_iounmap:
pci_iounmap(pdev, csr);
err_release_reg:
pci_release_region(pdev, 0);
err_disable_pdev:
pci_disable_device(pdev);
return rc;
}
static void wil_pcie_remove(struct pci_dev *pdev)
{
struct wil6210_priv *wil = pci_get_drvdata(pdev);
wil6210_debugfs_remove(wil);
wil_if_pcie_disable(wil);
wil_if_remove(wil);
wil_if_free(wil);
pci_iounmap(pdev, wil->csr);
pci_release_region(pdev, 0);
pci_disable_device(pdev);
}
static DEFINE_PCI_DEVICE_TABLE(wil6210_pcie_ids) = {
{ PCI_DEVICE(0x1ae9, 0x0301) },
{ /* end: all zeroes */ },
};
MODULE_DEVICE_TABLE(pci, wil6210_pcie_ids);
static struct pci_driver wil6210_driver = {
.probe = wil_pcie_probe,
.remove = wil_pcie_remove,
.id_table = wil6210_pcie_ids,
.name = WIL_NAME,
};
module_pci_driver(wil6210_driver);
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Qualcomm Atheros <wil6210@qca.qualcomm.com>");
MODULE_DESCRIPTION("Driver for 60g WiFi WIL6210 card");