linux_dsm_epyc7002/Documentation/devicetree
Greg Kroah-Hartman c532cc617e First set of IIO fixes for the 5.7 cycle.
Includes one MAINTAINERS update to avoid people getting a lot of bounce
 messages and complaining about it.
 
 * MAINTAINERS
   - Drop Stefan Popa's Analog Devices email address in favour of
     Michael Hennerich.
 * core
   - Fix handling of dB sysfs inputs.
   - Drop a stray semi colon in macro definition.
 * ad5770r
   - Fix an off by one in chec on maximum number of channels.
 * ad7192
   - Fix a null pointer de-reference due to the name previously being
     retrieved from the spi_get_device_id call which no longer works as
     the relevant table was removed.
 * ad7797
   - Use correct attribute group.
 * counter/104-quad-8
   - Add locks to prevent some race conditions.
 * inv-mpu6050
   - Fix issues around suspend / resume clashing with runtime PM.
 * stm32-adc
   - Fix sleep in invalid context
   - Fix id relative path error in device tree binding doc.
 * st_lsm6dsx
   - Fix a read alignment issue on an untagged FIFO.
   - Handle odr for slave to properly compute the FIFO data layout / pattern.
   - Flush the HW FIFO before resettting the device to avoid a race on
     interrupt line 1.
 * st_sensors
   - Rely on ODR mask not ODR address to identify if the ODR can be set.
     Some devices have an ODR address of 0.
 * ti-ads8344
   - Byte ordering was wrong - fix it.
 * xilinx-xadc
   - Fix inverted logic in powering down the second ADC.
   - Fix clearing interrupt when enabling the trigger.
   - Fix configuration of sequencer when in simultaneous sampling mode.
   - Limit initial sampling rate as done for runtime configured ones.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl6cgbkRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Foj/qg//c1TF2fhXEuGNua2M9PzaO+UgEkymF5lD
 R9bQPOPLXesTxmIZDIPWuIYaoFOIBrB6Kc9DvE8+7apVc0I/JFYmuXSjY1LGoBj5
 6WSrbtfAHYD5HBY/ZQq92iw+feFlctWtpp7H6Ngy2c7lQy8OKMhrHOA1NgbC++HH
 5OA5uoMD7Fo0mvAGY7/74DiJFEKG/PUUrGWSbH792Mh0EmvXgyFkWyHEXCUrS6Qo
 gbaLk8mZsTac3iwYoLk7AdYyQpEdQD/tnCHpBzHHdTdDcQuKHbknP9t/zFuEkM/e
 hAH6H/cOr+IMOkMvYe1HDRQsOwkPQppz2GnxtWAUwCV8Shkn7khOExnV17zqUfJx
 NSzX60/iZWj53cAJkp4ZW4Uf6dqEEeCvV9jzWngXsCTRz96tpwJoLDilTEStSp1r
 0d17OpFSkrPoJQR6miK+wCeoA4CcLLfGJXG1BcDpsT0qgHq/TNx7P7AX55Ip//IL
 uu7qCDzFHAct8C50r1725pthsX/69PI34F8wHQ+bSt8eBlEMc/+iDavXO7MPvNNi
 Xd/Je0c+6pV15X9lCN7RqujDjBb2yMzX9f3Omq0txc4ughYGYb3QLwAfBidjW6Wy
 fI6AgBXOdqUOlFgq0ncDUVmS73AMfb2ilvstfY+cfhLrtGIzZNwin1znSIxcesaS
 tUGD9Xk/bPc=
 =SmJy
 -----END PGP SIGNATURE-----

Merge tag 'iio-fixes-for-5.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes for the 5.7 cycle.

Includes one MAINTAINERS update to avoid people getting a lot of bounce
messages and complaining about it.

* MAINTAINERS
  - Drop Stefan Popa's Analog Devices email address in favour of
    Michael Hennerich.
* core
  - Fix handling of dB sysfs inputs.
  - Drop a stray semi colon in macro definition.
* ad5770r
  - Fix an off by one in chec on maximum number of channels.
* ad7192
  - Fix a null pointer de-reference due to the name previously being
    retrieved from the spi_get_device_id call which no longer works as
    the relevant table was removed.
* ad7797
  - Use correct attribute group.
* counter/104-quad-8
  - Add locks to prevent some race conditions.
* inv-mpu6050
  - Fix issues around suspend / resume clashing with runtime PM.
* stm32-adc
  - Fix sleep in invalid context
  - Fix id relative path error in device tree binding doc.
* st_lsm6dsx
  - Fix a read alignment issue on an untagged FIFO.
  - Handle odr for slave to properly compute the FIFO data layout / pattern.
  - Flush the HW FIFO before resettting the device to avoid a race on
    interrupt line 1.
* st_sensors
  - Rely on ODR mask not ODR address to identify if the ODR can be set.
    Some devices have an ODR address of 0.
* ti-ads8344
  - Byte ordering was wrong - fix it.
* xilinx-xadc
  - Fix inverted logic in powering down the second ADC.
  - Fix clearing interrupt when enabling the trigger.
  - Fix configuration of sequencer when in simultaneous sampling mode.
  - Limit initial sampling rate as done for runtime configured ones.

* tag 'iio-fixes-for-5.7a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  MAINTAINERS: remove Stefan Popa's email
  iio: adc: ad7192: fix null pointer de-reference crash during probe
  iio: core: remove extra semi-colon from devm_iio_device_register() macro
  iio: adc: ti-ads8344: properly byte swap value
  iio: imu: inv_mpu6050: fix suspend/resume with runtime power
  iio: st_sensors: rely on odr mask to know if odr can be set
  iio: xilinx-xadc: Make sure not exceed maximum samplerate
  iio: xilinx-xadc: Fix sequencer configuration for aux channels in simultaneous mode
  iio: xilinx-xadc: Fix clearing interrupt when enabling trigger
  iio: xilinx-xadc: Fix ADC-B powerdown
  iio: dac: ad5770r: fix off-by-one check on maximum number of channels
  iio: imu: st_lsm6dsx: flush hw FIFO before resetting the device
  iio: core: Fix handling of 'dB'
  dt-bindings: iio: adc: stm32-adc: fix id relative path
  counter: 104-quad-8: Add lock guards - generic interface
  iio: imu: st_lsm6dsx: specify slave odr in slv_odr
  iio: imu: st_lsm6dsx: fix read misalignment on untagged FIFO
  iio: adc: stm32-adc: fix sleep in atomic context
  iio:ad7797: Use correct attribute_group
2020-04-20 14:07:00 +02:00
..
bindings First set of IIO fixes for the 5.7 cycle. 2020-04-20 14:07:00 +02:00
booting-without-of.txt
changesets.txt
dynamic-resolution-notes.txt
of_unittest.txt
overlay-notes.txt
usage-model.txt
writing-schema.rst kbuild: allow to run dt_binding_check and dtbs_check in a single command 2020-03-13 10:04:36 +09:00