linux_dsm_epyc7002/drivers/gpu/drm/arm/malidp_hw.h
Liviu Dudau ad49f8602f drm/arm: Add support for Mali Display Processors
Add support for the new family of Display Processors from ARM Ltd.
This commit adds basic support for Mali DP500, DP550 and DP650
parts, with only the display engine being supported at the moment.

Cc: David Brown <David.Brown@arm.com>
Cc: Brian Starkey <Brian.Starkey@arm.com>

Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2016-06-15 17:29:22 +01:00

242 lines
5.8 KiB
C

/*
*
* (C) COPYRIGHT 2013-2016 ARM Limited. All rights reserved.
*
* This program is free software and is provided to you under the terms of the
* GNU General Public License version 2 as published by the Free Software
* Foundation, and any use by you of this program is subject to the terms
* of such GNU licence.
*
* ARM Mali DP hardware manipulation routines.
*/
#ifndef __MALIDP_HW_H__
#define __MALIDP_HW_H__
#include <linux/bitops.h>
#include "malidp_regs.h"
struct videomode;
struct clk;
/* Mali DP IP blocks */
enum {
MALIDP_DE_BLOCK = 0,
MALIDP_SE_BLOCK,
MALIDP_DC_BLOCK
};
/* Mali DP layer IDs */
enum {
DE_VIDEO1 = BIT(0),
DE_GRAPHICS1 = BIT(1),
DE_GRAPHICS2 = BIT(2), /* used only in DP500 */
DE_VIDEO2 = BIT(3),
DE_SMART = BIT(4),
};
struct malidp_input_format {
u32 format; /* DRM fourcc */
u8 layer; /* bitmask of layers supporting it */
u8 id; /* used internally */
};
#define MALIDP_INVALID_FORMAT_ID 0xff
/*
* hide the differences between register maps
* by using a common structure to hold the
* base register offsets
*/
struct malidp_irq_map {
u32 irq_mask; /* mask of IRQs that can be enabled in the block */
u32 vsync_irq; /* IRQ bit used for signaling during VSYNC */
};
struct malidp_layer {
u16 id; /* layer ID */
u16 base; /* address offset for the register bank */
u16 ptr; /* address offset for the pointer register */
};
/* regmap features */
#define MALIDP_REGMAP_HAS_CLEARIRQ (1 << 0)
struct malidp_hw_regmap {
/* address offset of the DE register bank */
/* is always 0x0000 */
/* address offset of the SE registers bank */
const u16 se_base;
/* address offset of the DC registers bank */
const u16 dc_base;
/* address offset for the output depth register */
const u16 out_depth_base;
/* bitmap with register map features */
const u8 features;
/* list of supported layers */
const u8 n_layers;
const struct malidp_layer *layers;
const struct malidp_irq_map de_irq_map;
const struct malidp_irq_map se_irq_map;
const struct malidp_irq_map dc_irq_map;
/* list of supported input formats for each layer */
const struct malidp_input_format *input_formats;
const u8 n_input_formats;
};
struct malidp_hw_device {
const struct malidp_hw_regmap map;
void __iomem *regs;
/* APB clock */
struct clk *pclk;
/* AXI clock */
struct clk *aclk;
/* main clock for display core */
struct clk *mclk;
/* pixel clock for display core */
struct clk *pxlclk;
/*
* Validate the driver instance against the hardware bits
*/
int (*query_hw)(struct malidp_hw_device *hwdev);
/*
* Set the hardware into config mode, ready to accept mode changes
*/
void (*enter_config_mode)(struct malidp_hw_device *hwdev);
/*
* Tell hardware to exit configuration mode
*/
void (*leave_config_mode)(struct malidp_hw_device *hwdev);
/*
* Query if hardware is in configuration mode
*/
bool (*in_config_mode)(struct malidp_hw_device *hwdev);
/*
* Set configuration valid flag for hardware parameters that can
* be changed outside the configuration mode. Hardware will use
* the new settings when config valid is set after the end of the
* current buffer scanout
*/
void (*set_config_valid)(struct malidp_hw_device *hwdev);
/*
* Set a new mode in hardware. Requires the hardware to be in
* configuration mode before this function is called.
*/
void (*modeset)(struct malidp_hw_device *hwdev, struct videomode *m);
/*
* Calculate the required rotation memory given the active area
* and the buffer format.
*/
int (*rotmem_required)(struct malidp_hw_device *hwdev, u16 w, u16 h, u32 fmt);
u8 features;
u8 min_line_size;
u16 max_line_size;
/* size of memory used for rotating layers, up to two banks available */
u32 rotation_memory[2];
};
/* Supported variants of the hardware */
enum {
MALIDP_500 = 0,
MALIDP_550,
MALIDP_650,
/* keep the next entry last */
MALIDP_MAX_DEVICES
};
extern const struct malidp_hw_device malidp_device[MALIDP_MAX_DEVICES];
static inline u32 malidp_hw_read(struct malidp_hw_device *hwdev, u32 reg)
{
return readl(hwdev->regs + reg);
}
static inline void malidp_hw_write(struct malidp_hw_device *hwdev,
u32 value, u32 reg)
{
writel(value, hwdev->regs + reg);
}
static inline void malidp_hw_setbits(struct malidp_hw_device *hwdev,
u32 mask, u32 reg)
{
u32 data = malidp_hw_read(hwdev, reg);
data |= mask;
malidp_hw_write(hwdev, data, reg);
}
static inline void malidp_hw_clearbits(struct malidp_hw_device *hwdev,
u32 mask, u32 reg)
{
u32 data = malidp_hw_read(hwdev, reg);
data &= ~mask;
malidp_hw_write(hwdev, data, reg);
}
static inline u32 malidp_get_block_base(struct malidp_hw_device *hwdev,
u8 block)
{
switch (block) {
case MALIDP_SE_BLOCK:
return hwdev->map.se_base;
case MALIDP_DC_BLOCK:
return hwdev->map.dc_base;
}
return 0;
}
static inline void malidp_hw_disable_irq(struct malidp_hw_device *hwdev,
u8 block, u32 irq)
{
u32 base = malidp_get_block_base(hwdev, block);
malidp_hw_clearbits(hwdev, irq, base + MALIDP_REG_MASKIRQ);
}
static inline void malidp_hw_enable_irq(struct malidp_hw_device *hwdev,
u8 block, u32 irq)
{
u32 base = malidp_get_block_base(hwdev, block);
malidp_hw_setbits(hwdev, irq, base + MALIDP_REG_MASKIRQ);
}
int malidp_de_irq_init(struct drm_device *drm, int irq);
void malidp_de_irq_fini(struct drm_device *drm);
int malidp_se_irq_init(struct drm_device *drm, int irq);
void malidp_se_irq_fini(struct drm_device *drm);
u8 malidp_hw_get_format_id(const struct malidp_hw_regmap *map,
u8 layer_id, u32 format);
/*
* background color components are defined as 12bits values,
* they will be shifted right when stored on hardware that
* supports only 8bits per channel
*/
#define MALIDP_BGND_COLOR_R 0x000
#define MALIDP_BGND_COLOR_G 0x000
#define MALIDP_BGND_COLOR_B 0x000
#endif /* __MALIDP_HW_H__ */