mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 18:55:08 +07:00
9f58892ea9
Currently the code to reset the GPU and our state is spread widely across a few files. Pull the logic together into a common file. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190116153304.787-1-chris@chris-wilson.co.uk
3045 lines
85 KiB
C
3045 lines
85 KiB
C
/* i915_drv.c -- i830,i845,i855,i865,i915 driver -*- linux-c -*-
|
|
*/
|
|
/*
|
|
*
|
|
* Copyright 2003 Tungsten Graphics, Inc., Cedar Park, Texas.
|
|
* All Rights Reserved.
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the
|
|
* "Software"), to deal in the Software without restriction, including
|
|
* without limitation the rights to use, copy, modify, merge, publish,
|
|
* distribute, sub license, and/or sell copies of the Software, and to
|
|
* permit persons to whom the Software is furnished to do so, subject to
|
|
* the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the
|
|
* next paragraph) shall be included in all copies or substantial portions
|
|
* of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
|
|
* OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
|
|
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
|
|
* IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
|
|
* ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
|
|
* TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
|
|
* SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/device.h>
|
|
#include <linux/oom.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/pnp.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/vgaarb.h>
|
|
#include <linux/vga_switcheroo.h>
|
|
#include <linux/vt.h>
|
|
#include <acpi/video.h>
|
|
|
|
#include <drm/drm_crtc_helper.h>
|
|
#include <drm/drm_atomic_helper.h>
|
|
#include <drm/i915_drm.h>
|
|
|
|
#include "i915_drv.h"
|
|
#include "i915_trace.h"
|
|
#include "i915_pmu.h"
|
|
#include "i915_reset.h"
|
|
#include "i915_query.h"
|
|
#include "i915_vgpu.h"
|
|
#include "intel_drv.h"
|
|
#include "intel_uc.h"
|
|
#include "intel_workarounds.h"
|
|
|
|
static struct drm_driver driver;
|
|
|
|
#if IS_ENABLED(CONFIG_DRM_I915_DEBUG)
|
|
static unsigned int i915_load_fail_count;
|
|
|
|
bool __i915_inject_load_failure(const char *func, int line)
|
|
{
|
|
if (i915_load_fail_count >= i915_modparams.inject_load_failure)
|
|
return false;
|
|
|
|
if (++i915_load_fail_count == i915_modparams.inject_load_failure) {
|
|
DRM_INFO("Injecting failure at checkpoint %u [%s:%d]\n",
|
|
i915_modparams.inject_load_failure, func, line);
|
|
i915_modparams.inject_load_failure = 0;
|
|
return true;
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
bool i915_error_injected(void)
|
|
{
|
|
return i915_load_fail_count && !i915_modparams.inject_load_failure;
|
|
}
|
|
|
|
#endif
|
|
|
|
#define FDO_BUG_URL "https://bugs.freedesktop.org/enter_bug.cgi?product=DRI"
|
|
#define FDO_BUG_MSG "Please file a bug at " FDO_BUG_URL " against DRM/Intel " \
|
|
"providing the dmesg log by booting with drm.debug=0xf"
|
|
|
|
void
|
|
__i915_printk(struct drm_i915_private *dev_priv, const char *level,
|
|
const char *fmt, ...)
|
|
{
|
|
static bool shown_bug_once;
|
|
struct device *kdev = dev_priv->drm.dev;
|
|
bool is_error = level[1] <= KERN_ERR[1];
|
|
bool is_debug = level[1] == KERN_DEBUG[1];
|
|
struct va_format vaf;
|
|
va_list args;
|
|
|
|
if (is_debug && !(drm_debug & DRM_UT_DRIVER))
|
|
return;
|
|
|
|
va_start(args, fmt);
|
|
|
|
vaf.fmt = fmt;
|
|
vaf.va = &args;
|
|
|
|
if (is_error)
|
|
dev_printk(level, kdev, "%pV", &vaf);
|
|
else
|
|
dev_printk(level, kdev, "[" DRM_NAME ":%ps] %pV",
|
|
__builtin_return_address(0), &vaf);
|
|
|
|
va_end(args);
|
|
|
|
if (is_error && !shown_bug_once) {
|
|
/*
|
|
* Ask the user to file a bug report for the error, except
|
|
* if they may have caused the bug by fiddling with unsafe
|
|
* module parameters.
|
|
*/
|
|
if (!test_taint(TAINT_USER))
|
|
dev_notice(kdev, "%s", FDO_BUG_MSG);
|
|
shown_bug_once = true;
|
|
}
|
|
}
|
|
|
|
/* Map PCH device id to PCH type, or PCH_NONE if unknown. */
|
|
static enum intel_pch
|
|
intel_pch_type(const struct drm_i915_private *dev_priv, unsigned short id)
|
|
{
|
|
switch (id) {
|
|
case INTEL_PCH_IBX_DEVICE_ID_TYPE:
|
|
DRM_DEBUG_KMS("Found Ibex Peak PCH\n");
|
|
WARN_ON(!IS_GEN(dev_priv, 5));
|
|
return PCH_IBX;
|
|
case INTEL_PCH_CPT_DEVICE_ID_TYPE:
|
|
DRM_DEBUG_KMS("Found CougarPoint PCH\n");
|
|
WARN_ON(!IS_GEN(dev_priv, 6) && !IS_IVYBRIDGE(dev_priv));
|
|
return PCH_CPT;
|
|
case INTEL_PCH_PPT_DEVICE_ID_TYPE:
|
|
DRM_DEBUG_KMS("Found PantherPoint PCH\n");
|
|
WARN_ON(!IS_GEN(dev_priv, 6) && !IS_IVYBRIDGE(dev_priv));
|
|
/* PantherPoint is CPT compatible */
|
|
return PCH_CPT;
|
|
case INTEL_PCH_LPT_DEVICE_ID_TYPE:
|
|
DRM_DEBUG_KMS("Found LynxPoint PCH\n");
|
|
WARN_ON(!IS_HASWELL(dev_priv) && !IS_BROADWELL(dev_priv));
|
|
WARN_ON(IS_HSW_ULT(dev_priv) || IS_BDW_ULT(dev_priv));
|
|
return PCH_LPT;
|
|
case INTEL_PCH_LPT_LP_DEVICE_ID_TYPE:
|
|
DRM_DEBUG_KMS("Found LynxPoint LP PCH\n");
|
|
WARN_ON(!IS_HASWELL(dev_priv) && !IS_BROADWELL(dev_priv));
|
|
WARN_ON(!IS_HSW_ULT(dev_priv) && !IS_BDW_ULT(dev_priv));
|
|
return PCH_LPT;
|
|
case INTEL_PCH_WPT_DEVICE_ID_TYPE:
|
|
DRM_DEBUG_KMS("Found WildcatPoint PCH\n");
|
|
WARN_ON(!IS_HASWELL(dev_priv) && !IS_BROADWELL(dev_priv));
|
|
WARN_ON(IS_HSW_ULT(dev_priv) || IS_BDW_ULT(dev_priv));
|
|
/* WildcatPoint is LPT compatible */
|
|
return PCH_LPT;
|
|
case INTEL_PCH_WPT_LP_DEVICE_ID_TYPE:
|
|
DRM_DEBUG_KMS("Found WildcatPoint LP PCH\n");
|
|
WARN_ON(!IS_HASWELL(dev_priv) && !IS_BROADWELL(dev_priv));
|
|
WARN_ON(!IS_HSW_ULT(dev_priv) && !IS_BDW_ULT(dev_priv));
|
|
/* WildcatPoint is LPT compatible */
|
|
return PCH_LPT;
|
|
case INTEL_PCH_SPT_DEVICE_ID_TYPE:
|
|
DRM_DEBUG_KMS("Found SunrisePoint PCH\n");
|
|
WARN_ON(!IS_SKYLAKE(dev_priv) && !IS_KABYLAKE(dev_priv));
|
|
return PCH_SPT;
|
|
case INTEL_PCH_SPT_LP_DEVICE_ID_TYPE:
|
|
DRM_DEBUG_KMS("Found SunrisePoint LP PCH\n");
|
|
WARN_ON(!IS_SKYLAKE(dev_priv) && !IS_KABYLAKE(dev_priv));
|
|
return PCH_SPT;
|
|
case INTEL_PCH_KBP_DEVICE_ID_TYPE:
|
|
DRM_DEBUG_KMS("Found Kaby Lake PCH (KBP)\n");
|
|
WARN_ON(!IS_SKYLAKE(dev_priv) && !IS_KABYLAKE(dev_priv) &&
|
|
!IS_COFFEELAKE(dev_priv));
|
|
return PCH_KBP;
|
|
case INTEL_PCH_CNP_DEVICE_ID_TYPE:
|
|
DRM_DEBUG_KMS("Found Cannon Lake PCH (CNP)\n");
|
|
WARN_ON(!IS_CANNONLAKE(dev_priv) && !IS_COFFEELAKE(dev_priv));
|
|
return PCH_CNP;
|
|
case INTEL_PCH_CNP_LP_DEVICE_ID_TYPE:
|
|
DRM_DEBUG_KMS("Found Cannon Lake LP PCH (CNP-LP)\n");
|
|
WARN_ON(!IS_CANNONLAKE(dev_priv) && !IS_COFFEELAKE(dev_priv));
|
|
return PCH_CNP;
|
|
case INTEL_PCH_ICP_DEVICE_ID_TYPE:
|
|
DRM_DEBUG_KMS("Found Ice Lake PCH\n");
|
|
WARN_ON(!IS_ICELAKE(dev_priv));
|
|
return PCH_ICP;
|
|
default:
|
|
return PCH_NONE;
|
|
}
|
|
}
|
|
|
|
static bool intel_is_virt_pch(unsigned short id,
|
|
unsigned short svendor, unsigned short sdevice)
|
|
{
|
|
return (id == INTEL_PCH_P2X_DEVICE_ID_TYPE ||
|
|
id == INTEL_PCH_P3X_DEVICE_ID_TYPE ||
|
|
(id == INTEL_PCH_QEMU_DEVICE_ID_TYPE &&
|
|
svendor == PCI_SUBVENDOR_ID_REDHAT_QUMRANET &&
|
|
sdevice == PCI_SUBDEVICE_ID_QEMU));
|
|
}
|
|
|
|
static unsigned short
|
|
intel_virt_detect_pch(const struct drm_i915_private *dev_priv)
|
|
{
|
|
unsigned short id = 0;
|
|
|
|
/*
|
|
* In a virtualized passthrough environment we can be in a
|
|
* setup where the ISA bridge is not able to be passed through.
|
|
* In this case, a south bridge can be emulated and we have to
|
|
* make an educated guess as to which PCH is really there.
|
|
*/
|
|
|
|
if (IS_GEN(dev_priv, 5))
|
|
id = INTEL_PCH_IBX_DEVICE_ID_TYPE;
|
|
else if (IS_GEN(dev_priv, 6) || IS_IVYBRIDGE(dev_priv))
|
|
id = INTEL_PCH_CPT_DEVICE_ID_TYPE;
|
|
else if (IS_HSW_ULT(dev_priv) || IS_BDW_ULT(dev_priv))
|
|
id = INTEL_PCH_LPT_LP_DEVICE_ID_TYPE;
|
|
else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
|
|
id = INTEL_PCH_LPT_DEVICE_ID_TYPE;
|
|
else if (IS_SKYLAKE(dev_priv) || IS_KABYLAKE(dev_priv))
|
|
id = INTEL_PCH_SPT_DEVICE_ID_TYPE;
|
|
else if (IS_COFFEELAKE(dev_priv) || IS_CANNONLAKE(dev_priv))
|
|
id = INTEL_PCH_CNP_DEVICE_ID_TYPE;
|
|
else if (IS_ICELAKE(dev_priv))
|
|
id = INTEL_PCH_ICP_DEVICE_ID_TYPE;
|
|
|
|
if (id)
|
|
DRM_DEBUG_KMS("Assuming PCH ID %04x\n", id);
|
|
else
|
|
DRM_DEBUG_KMS("Assuming no PCH\n");
|
|
|
|
return id;
|
|
}
|
|
|
|
static void intel_detect_pch(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct pci_dev *pch = NULL;
|
|
|
|
/*
|
|
* The reason to probe ISA bridge instead of Dev31:Fun0 is to
|
|
* make graphics device passthrough work easy for VMM, that only
|
|
* need to expose ISA bridge to let driver know the real hardware
|
|
* underneath. This is a requirement from virtualization team.
|
|
*
|
|
* In some virtualized environments (e.g. XEN), there is irrelevant
|
|
* ISA bridge in the system. To work reliably, we should scan trhough
|
|
* all the ISA bridge devices and check for the first match, instead
|
|
* of only checking the first one.
|
|
*/
|
|
while ((pch = pci_get_class(PCI_CLASS_BRIDGE_ISA << 8, pch))) {
|
|
unsigned short id;
|
|
enum intel_pch pch_type;
|
|
|
|
if (pch->vendor != PCI_VENDOR_ID_INTEL)
|
|
continue;
|
|
|
|
id = pch->device & INTEL_PCH_DEVICE_ID_MASK;
|
|
|
|
pch_type = intel_pch_type(dev_priv, id);
|
|
if (pch_type != PCH_NONE) {
|
|
dev_priv->pch_type = pch_type;
|
|
dev_priv->pch_id = id;
|
|
break;
|
|
} else if (intel_is_virt_pch(id, pch->subsystem_vendor,
|
|
pch->subsystem_device)) {
|
|
id = intel_virt_detect_pch(dev_priv);
|
|
pch_type = intel_pch_type(dev_priv, id);
|
|
|
|
/* Sanity check virtual PCH id */
|
|
if (WARN_ON(id && pch_type == PCH_NONE))
|
|
id = 0;
|
|
|
|
dev_priv->pch_type = pch_type;
|
|
dev_priv->pch_id = id;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Use PCH_NOP (PCH but no South Display) for PCH platforms without
|
|
* display.
|
|
*/
|
|
if (pch && !HAS_DISPLAY(dev_priv)) {
|
|
DRM_DEBUG_KMS("Display disabled, reverting to NOP PCH\n");
|
|
dev_priv->pch_type = PCH_NOP;
|
|
dev_priv->pch_id = 0;
|
|
}
|
|
|
|
if (!pch)
|
|
DRM_DEBUG_KMS("No PCH found.\n");
|
|
|
|
pci_dev_put(pch);
|
|
}
|
|
|
|
static int i915_getparam_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file_priv)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct pci_dev *pdev = dev_priv->drm.pdev;
|
|
drm_i915_getparam_t *param = data;
|
|
int value;
|
|
|
|
switch (param->param) {
|
|
case I915_PARAM_IRQ_ACTIVE:
|
|
case I915_PARAM_ALLOW_BATCHBUFFER:
|
|
case I915_PARAM_LAST_DISPATCH:
|
|
case I915_PARAM_HAS_EXEC_CONSTANTS:
|
|
/* Reject all old ums/dri params. */
|
|
return -ENODEV;
|
|
case I915_PARAM_CHIPSET_ID:
|
|
value = pdev->device;
|
|
break;
|
|
case I915_PARAM_REVISION:
|
|
value = pdev->revision;
|
|
break;
|
|
case I915_PARAM_NUM_FENCES_AVAIL:
|
|
value = dev_priv->num_fence_regs;
|
|
break;
|
|
case I915_PARAM_HAS_OVERLAY:
|
|
value = dev_priv->overlay ? 1 : 0;
|
|
break;
|
|
case I915_PARAM_HAS_BSD:
|
|
value = !!dev_priv->engine[VCS];
|
|
break;
|
|
case I915_PARAM_HAS_BLT:
|
|
value = !!dev_priv->engine[BCS];
|
|
break;
|
|
case I915_PARAM_HAS_VEBOX:
|
|
value = !!dev_priv->engine[VECS];
|
|
break;
|
|
case I915_PARAM_HAS_BSD2:
|
|
value = !!dev_priv->engine[VCS2];
|
|
break;
|
|
case I915_PARAM_HAS_LLC:
|
|
value = HAS_LLC(dev_priv);
|
|
break;
|
|
case I915_PARAM_HAS_WT:
|
|
value = HAS_WT(dev_priv);
|
|
break;
|
|
case I915_PARAM_HAS_ALIASING_PPGTT:
|
|
value = min_t(int, INTEL_PPGTT(dev_priv), I915_GEM_PPGTT_FULL);
|
|
break;
|
|
case I915_PARAM_HAS_SEMAPHORES:
|
|
value = 0;
|
|
break;
|
|
case I915_PARAM_HAS_SECURE_BATCHES:
|
|
value = capable(CAP_SYS_ADMIN);
|
|
break;
|
|
case I915_PARAM_CMD_PARSER_VERSION:
|
|
value = i915_cmd_parser_get_version(dev_priv);
|
|
break;
|
|
case I915_PARAM_SUBSLICE_TOTAL:
|
|
value = sseu_subslice_total(&RUNTIME_INFO(dev_priv)->sseu);
|
|
if (!value)
|
|
return -ENODEV;
|
|
break;
|
|
case I915_PARAM_EU_TOTAL:
|
|
value = RUNTIME_INFO(dev_priv)->sseu.eu_total;
|
|
if (!value)
|
|
return -ENODEV;
|
|
break;
|
|
case I915_PARAM_HAS_GPU_RESET:
|
|
value = i915_modparams.enable_hangcheck &&
|
|
intel_has_gpu_reset(dev_priv);
|
|
if (value && intel_has_reset_engine(dev_priv))
|
|
value = 2;
|
|
break;
|
|
case I915_PARAM_HAS_RESOURCE_STREAMER:
|
|
value = 0;
|
|
break;
|
|
case I915_PARAM_HAS_POOLED_EU:
|
|
value = HAS_POOLED_EU(dev_priv);
|
|
break;
|
|
case I915_PARAM_MIN_EU_IN_POOL:
|
|
value = RUNTIME_INFO(dev_priv)->sseu.min_eu_in_pool;
|
|
break;
|
|
case I915_PARAM_HUC_STATUS:
|
|
value = intel_huc_check_status(&dev_priv->huc);
|
|
if (value < 0)
|
|
return value;
|
|
break;
|
|
case I915_PARAM_MMAP_GTT_VERSION:
|
|
/* Though we've started our numbering from 1, and so class all
|
|
* earlier versions as 0, in effect their value is undefined as
|
|
* the ioctl will report EINVAL for the unknown param!
|
|
*/
|
|
value = i915_gem_mmap_gtt_version();
|
|
break;
|
|
case I915_PARAM_HAS_SCHEDULER:
|
|
value = dev_priv->caps.scheduler;
|
|
break;
|
|
|
|
case I915_PARAM_MMAP_VERSION:
|
|
/* Remember to bump this if the version changes! */
|
|
case I915_PARAM_HAS_GEM:
|
|
case I915_PARAM_HAS_PAGEFLIPPING:
|
|
case I915_PARAM_HAS_EXECBUF2: /* depends on GEM */
|
|
case I915_PARAM_HAS_RELAXED_FENCING:
|
|
case I915_PARAM_HAS_COHERENT_RINGS:
|
|
case I915_PARAM_HAS_RELAXED_DELTA:
|
|
case I915_PARAM_HAS_GEN7_SOL_RESET:
|
|
case I915_PARAM_HAS_WAIT_TIMEOUT:
|
|
case I915_PARAM_HAS_PRIME_VMAP_FLUSH:
|
|
case I915_PARAM_HAS_PINNED_BATCHES:
|
|
case I915_PARAM_HAS_EXEC_NO_RELOC:
|
|
case I915_PARAM_HAS_EXEC_HANDLE_LUT:
|
|
case I915_PARAM_HAS_COHERENT_PHYS_GTT:
|
|
case I915_PARAM_HAS_EXEC_SOFTPIN:
|
|
case I915_PARAM_HAS_EXEC_ASYNC:
|
|
case I915_PARAM_HAS_EXEC_FENCE:
|
|
case I915_PARAM_HAS_EXEC_CAPTURE:
|
|
case I915_PARAM_HAS_EXEC_BATCH_FIRST:
|
|
case I915_PARAM_HAS_EXEC_FENCE_ARRAY:
|
|
/* For the time being all of these are always true;
|
|
* if some supported hardware does not have one of these
|
|
* features this value needs to be provided from
|
|
* INTEL_INFO(), a feature macro, or similar.
|
|
*/
|
|
value = 1;
|
|
break;
|
|
case I915_PARAM_HAS_CONTEXT_ISOLATION:
|
|
value = intel_engines_has_context_isolation(dev_priv);
|
|
break;
|
|
case I915_PARAM_SLICE_MASK:
|
|
value = RUNTIME_INFO(dev_priv)->sseu.slice_mask;
|
|
if (!value)
|
|
return -ENODEV;
|
|
break;
|
|
case I915_PARAM_SUBSLICE_MASK:
|
|
value = RUNTIME_INFO(dev_priv)->sseu.subslice_mask[0];
|
|
if (!value)
|
|
return -ENODEV;
|
|
break;
|
|
case I915_PARAM_CS_TIMESTAMP_FREQUENCY:
|
|
value = 1000 * RUNTIME_INFO(dev_priv)->cs_timestamp_frequency_khz;
|
|
break;
|
|
case I915_PARAM_MMAP_GTT_COHERENT:
|
|
value = INTEL_INFO(dev_priv)->has_coherent_ggtt;
|
|
break;
|
|
default:
|
|
DRM_DEBUG("Unknown parameter %d\n", param->param);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (put_user(value, param->value))
|
|
return -EFAULT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i915_get_bridge_dev(struct drm_i915_private *dev_priv)
|
|
{
|
|
int domain = pci_domain_nr(dev_priv->drm.pdev->bus);
|
|
|
|
dev_priv->bridge_dev =
|
|
pci_get_domain_bus_and_slot(domain, 0, PCI_DEVFN(0, 0));
|
|
if (!dev_priv->bridge_dev) {
|
|
DRM_ERROR("bridge device not found\n");
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* Allocate space for the MCH regs if needed, return nonzero on error */
|
|
static int
|
|
intel_alloc_mchbar_resource(struct drm_i915_private *dev_priv)
|
|
{
|
|
int reg = INTEL_GEN(dev_priv) >= 4 ? MCHBAR_I965 : MCHBAR_I915;
|
|
u32 temp_lo, temp_hi = 0;
|
|
u64 mchbar_addr;
|
|
int ret;
|
|
|
|
if (INTEL_GEN(dev_priv) >= 4)
|
|
pci_read_config_dword(dev_priv->bridge_dev, reg + 4, &temp_hi);
|
|
pci_read_config_dword(dev_priv->bridge_dev, reg, &temp_lo);
|
|
mchbar_addr = ((u64)temp_hi << 32) | temp_lo;
|
|
|
|
/* If ACPI doesn't have it, assume we need to allocate it ourselves */
|
|
#ifdef CONFIG_PNP
|
|
if (mchbar_addr &&
|
|
pnp_range_reserved(mchbar_addr, mchbar_addr + MCHBAR_SIZE))
|
|
return 0;
|
|
#endif
|
|
|
|
/* Get some space for it */
|
|
dev_priv->mch_res.name = "i915 MCHBAR";
|
|
dev_priv->mch_res.flags = IORESOURCE_MEM;
|
|
ret = pci_bus_alloc_resource(dev_priv->bridge_dev->bus,
|
|
&dev_priv->mch_res,
|
|
MCHBAR_SIZE, MCHBAR_SIZE,
|
|
PCIBIOS_MIN_MEM,
|
|
0, pcibios_align_resource,
|
|
dev_priv->bridge_dev);
|
|
if (ret) {
|
|
DRM_DEBUG_DRIVER("failed bus alloc: %d\n", ret);
|
|
dev_priv->mch_res.start = 0;
|
|
return ret;
|
|
}
|
|
|
|
if (INTEL_GEN(dev_priv) >= 4)
|
|
pci_write_config_dword(dev_priv->bridge_dev, reg + 4,
|
|
upper_32_bits(dev_priv->mch_res.start));
|
|
|
|
pci_write_config_dword(dev_priv->bridge_dev, reg,
|
|
lower_32_bits(dev_priv->mch_res.start));
|
|
return 0;
|
|
}
|
|
|
|
/* Setup MCHBAR if possible, return true if we should disable it again */
|
|
static void
|
|
intel_setup_mchbar(struct drm_i915_private *dev_priv)
|
|
{
|
|
int mchbar_reg = INTEL_GEN(dev_priv) >= 4 ? MCHBAR_I965 : MCHBAR_I915;
|
|
u32 temp;
|
|
bool enabled;
|
|
|
|
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
|
|
return;
|
|
|
|
dev_priv->mchbar_need_disable = false;
|
|
|
|
if (IS_I915G(dev_priv) || IS_I915GM(dev_priv)) {
|
|
pci_read_config_dword(dev_priv->bridge_dev, DEVEN, &temp);
|
|
enabled = !!(temp & DEVEN_MCHBAR_EN);
|
|
} else {
|
|
pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
|
|
enabled = temp & 1;
|
|
}
|
|
|
|
/* If it's already enabled, don't have to do anything */
|
|
if (enabled)
|
|
return;
|
|
|
|
if (intel_alloc_mchbar_resource(dev_priv))
|
|
return;
|
|
|
|
dev_priv->mchbar_need_disable = true;
|
|
|
|
/* Space is allocated or reserved, so enable it. */
|
|
if (IS_I915G(dev_priv) || IS_I915GM(dev_priv)) {
|
|
pci_write_config_dword(dev_priv->bridge_dev, DEVEN,
|
|
temp | DEVEN_MCHBAR_EN);
|
|
} else {
|
|
pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg, &temp);
|
|
pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg, temp | 1);
|
|
}
|
|
}
|
|
|
|
static void
|
|
intel_teardown_mchbar(struct drm_i915_private *dev_priv)
|
|
{
|
|
int mchbar_reg = INTEL_GEN(dev_priv) >= 4 ? MCHBAR_I965 : MCHBAR_I915;
|
|
|
|
if (dev_priv->mchbar_need_disable) {
|
|
if (IS_I915G(dev_priv) || IS_I915GM(dev_priv)) {
|
|
u32 deven_val;
|
|
|
|
pci_read_config_dword(dev_priv->bridge_dev, DEVEN,
|
|
&deven_val);
|
|
deven_val &= ~DEVEN_MCHBAR_EN;
|
|
pci_write_config_dword(dev_priv->bridge_dev, DEVEN,
|
|
deven_val);
|
|
} else {
|
|
u32 mchbar_val;
|
|
|
|
pci_read_config_dword(dev_priv->bridge_dev, mchbar_reg,
|
|
&mchbar_val);
|
|
mchbar_val &= ~1;
|
|
pci_write_config_dword(dev_priv->bridge_dev, mchbar_reg,
|
|
mchbar_val);
|
|
}
|
|
}
|
|
|
|
if (dev_priv->mch_res.start)
|
|
release_resource(&dev_priv->mch_res);
|
|
}
|
|
|
|
/* true = enable decode, false = disable decoder */
|
|
static unsigned int i915_vga_set_decode(void *cookie, bool state)
|
|
{
|
|
struct drm_i915_private *dev_priv = cookie;
|
|
|
|
intel_modeset_vga_set_state(dev_priv, state);
|
|
if (state)
|
|
return VGA_RSRC_LEGACY_IO | VGA_RSRC_LEGACY_MEM |
|
|
VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
|
|
else
|
|
return VGA_RSRC_NORMAL_IO | VGA_RSRC_NORMAL_MEM;
|
|
}
|
|
|
|
static int i915_resume_switcheroo(struct drm_device *dev);
|
|
static int i915_suspend_switcheroo(struct drm_device *dev, pm_message_t state);
|
|
|
|
static void i915_switcheroo_set_state(struct pci_dev *pdev, enum vga_switcheroo_state state)
|
|
{
|
|
struct drm_device *dev = pci_get_drvdata(pdev);
|
|
pm_message_t pmm = { .event = PM_EVENT_SUSPEND };
|
|
|
|
if (state == VGA_SWITCHEROO_ON) {
|
|
pr_info("switched on\n");
|
|
dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
|
|
/* i915 resume handler doesn't set to D0 */
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
i915_resume_switcheroo(dev);
|
|
dev->switch_power_state = DRM_SWITCH_POWER_ON;
|
|
} else {
|
|
pr_info("switched off\n");
|
|
dev->switch_power_state = DRM_SWITCH_POWER_CHANGING;
|
|
i915_suspend_switcheroo(dev, pmm);
|
|
dev->switch_power_state = DRM_SWITCH_POWER_OFF;
|
|
}
|
|
}
|
|
|
|
static bool i915_switcheroo_can_switch(struct pci_dev *pdev)
|
|
{
|
|
struct drm_device *dev = pci_get_drvdata(pdev);
|
|
|
|
/*
|
|
* FIXME: open_count is protected by drm_global_mutex but that would lead to
|
|
* locking inversion with the driver load path. And the access here is
|
|
* completely racy anyway. So don't bother with locking for now.
|
|
*/
|
|
return dev->open_count == 0;
|
|
}
|
|
|
|
static const struct vga_switcheroo_client_ops i915_switcheroo_ops = {
|
|
.set_gpu_state = i915_switcheroo_set_state,
|
|
.reprobe = NULL,
|
|
.can_switch = i915_switcheroo_can_switch,
|
|
};
|
|
|
|
static int i915_load_modeset_init(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct pci_dev *pdev = dev_priv->drm.pdev;
|
|
int ret;
|
|
|
|
if (i915_inject_load_failure())
|
|
return -ENODEV;
|
|
|
|
if (HAS_DISPLAY(dev_priv)) {
|
|
ret = drm_vblank_init(&dev_priv->drm,
|
|
INTEL_INFO(dev_priv)->num_pipes);
|
|
if (ret)
|
|
goto out;
|
|
}
|
|
|
|
intel_bios_init(dev_priv);
|
|
|
|
/* If we have > 1 VGA cards, then we need to arbitrate access
|
|
* to the common VGA resources.
|
|
*
|
|
* If we are a secondary display controller (!PCI_DISPLAY_CLASS_VGA),
|
|
* then we do not take part in VGA arbitration and the
|
|
* vga_client_register() fails with -ENODEV.
|
|
*/
|
|
ret = vga_client_register(pdev, dev_priv, NULL, i915_vga_set_decode);
|
|
if (ret && ret != -ENODEV)
|
|
goto out;
|
|
|
|
intel_register_dsm_handler();
|
|
|
|
ret = vga_switcheroo_register_client(pdev, &i915_switcheroo_ops, false);
|
|
if (ret)
|
|
goto cleanup_vga_client;
|
|
|
|
/* must happen before intel_power_domains_init_hw() on VLV/CHV */
|
|
intel_update_rawclk(dev_priv);
|
|
|
|
intel_power_domains_init_hw(dev_priv, false);
|
|
|
|
intel_csr_ucode_init(dev_priv);
|
|
|
|
ret = intel_irq_install(dev_priv);
|
|
if (ret)
|
|
goto cleanup_csr;
|
|
|
|
intel_setup_gmbus(dev_priv);
|
|
|
|
/* Important: The output setup functions called by modeset_init need
|
|
* working irqs for e.g. gmbus and dp aux transfers. */
|
|
ret = intel_modeset_init(dev);
|
|
if (ret)
|
|
goto cleanup_irq;
|
|
|
|
ret = i915_gem_init(dev_priv);
|
|
if (ret)
|
|
goto cleanup_modeset;
|
|
|
|
intel_overlay_setup(dev_priv);
|
|
|
|
if (!HAS_DISPLAY(dev_priv))
|
|
return 0;
|
|
|
|
ret = intel_fbdev_init(dev);
|
|
if (ret)
|
|
goto cleanup_gem;
|
|
|
|
/* Only enable hotplug handling once the fbdev is fully set up. */
|
|
intel_hpd_init(dev_priv);
|
|
|
|
intel_init_ipc(dev_priv);
|
|
|
|
return 0;
|
|
|
|
cleanup_gem:
|
|
if (i915_gem_suspend(dev_priv))
|
|
DRM_ERROR("failed to idle hardware; continuing to unload!\n");
|
|
i915_gem_fini(dev_priv);
|
|
cleanup_modeset:
|
|
intel_modeset_cleanup(dev);
|
|
cleanup_irq:
|
|
drm_irq_uninstall(dev);
|
|
intel_teardown_gmbus(dev_priv);
|
|
cleanup_csr:
|
|
intel_csr_ucode_fini(dev_priv);
|
|
intel_power_domains_fini_hw(dev_priv);
|
|
vga_switcheroo_unregister_client(pdev);
|
|
cleanup_vga_client:
|
|
vga_client_register(pdev, NULL, NULL, NULL);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int i915_kick_out_firmware_fb(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct apertures_struct *ap;
|
|
struct pci_dev *pdev = dev_priv->drm.pdev;
|
|
struct i915_ggtt *ggtt = &dev_priv->ggtt;
|
|
bool primary;
|
|
int ret;
|
|
|
|
ap = alloc_apertures(1);
|
|
if (!ap)
|
|
return -ENOMEM;
|
|
|
|
ap->ranges[0].base = ggtt->gmadr.start;
|
|
ap->ranges[0].size = ggtt->mappable_end;
|
|
|
|
primary =
|
|
pdev->resource[PCI_ROM_RESOURCE].flags & IORESOURCE_ROM_SHADOW;
|
|
|
|
ret = drm_fb_helper_remove_conflicting_framebuffers(ap, "inteldrmfb", primary);
|
|
|
|
kfree(ap);
|
|
|
|
return ret;
|
|
}
|
|
|
|
#if !defined(CONFIG_VGA_CONSOLE)
|
|
static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
|
|
{
|
|
return 0;
|
|
}
|
|
#elif !defined(CONFIG_DUMMY_CONSOLE)
|
|
static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#else
|
|
static int i915_kick_out_vgacon(struct drm_i915_private *dev_priv)
|
|
{
|
|
int ret = 0;
|
|
|
|
DRM_INFO("Replacing VGA console driver\n");
|
|
|
|
console_lock();
|
|
if (con_is_bound(&vga_con))
|
|
ret = do_take_over_console(&dummy_con, 0, MAX_NR_CONSOLES - 1, 1);
|
|
if (ret == 0) {
|
|
ret = do_unregister_con_driver(&vga_con);
|
|
|
|
/* Ignore "already unregistered". */
|
|
if (ret == -ENODEV)
|
|
ret = 0;
|
|
}
|
|
console_unlock();
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static void intel_init_dpio(struct drm_i915_private *dev_priv)
|
|
{
|
|
/*
|
|
* IOSF_PORT_DPIO is used for VLV x2 PHY (DP/HDMI B and C),
|
|
* CHV x1 PHY (DP/HDMI D)
|
|
* IOSF_PORT_DPIO_2 is used for CHV x2 PHY (DP/HDMI B and C)
|
|
*/
|
|
if (IS_CHERRYVIEW(dev_priv)) {
|
|
DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO_2;
|
|
DPIO_PHY_IOSF_PORT(DPIO_PHY1) = IOSF_PORT_DPIO;
|
|
} else if (IS_VALLEYVIEW(dev_priv)) {
|
|
DPIO_PHY_IOSF_PORT(DPIO_PHY0) = IOSF_PORT_DPIO;
|
|
}
|
|
}
|
|
|
|
static int i915_workqueues_init(struct drm_i915_private *dev_priv)
|
|
{
|
|
/*
|
|
* The i915 workqueue is primarily used for batched retirement of
|
|
* requests (and thus managing bo) once the task has been completed
|
|
* by the GPU. i915_retire_requests() is called directly when we
|
|
* need high-priority retirement, such as waiting for an explicit
|
|
* bo.
|
|
*
|
|
* It is also used for periodic low-priority events, such as
|
|
* idle-timers and recording error state.
|
|
*
|
|
* All tasks on the workqueue are expected to acquire the dev mutex
|
|
* so there is no point in running more than one instance of the
|
|
* workqueue at any time. Use an ordered one.
|
|
*/
|
|
dev_priv->wq = alloc_ordered_workqueue("i915", 0);
|
|
if (dev_priv->wq == NULL)
|
|
goto out_err;
|
|
|
|
dev_priv->hotplug.dp_wq = alloc_ordered_workqueue("i915-dp", 0);
|
|
if (dev_priv->hotplug.dp_wq == NULL)
|
|
goto out_free_wq;
|
|
|
|
return 0;
|
|
|
|
out_free_wq:
|
|
destroy_workqueue(dev_priv->wq);
|
|
out_err:
|
|
DRM_ERROR("Failed to allocate workqueues.\n");
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
static void i915_engines_cleanup(struct drm_i915_private *i915)
|
|
{
|
|
struct intel_engine_cs *engine;
|
|
enum intel_engine_id id;
|
|
|
|
for_each_engine(engine, i915, id)
|
|
kfree(engine);
|
|
}
|
|
|
|
static void i915_workqueues_cleanup(struct drm_i915_private *dev_priv)
|
|
{
|
|
destroy_workqueue(dev_priv->hotplug.dp_wq);
|
|
destroy_workqueue(dev_priv->wq);
|
|
}
|
|
|
|
/*
|
|
* We don't keep the workarounds for pre-production hardware, so we expect our
|
|
* driver to fail on these machines in one way or another. A little warning on
|
|
* dmesg may help both the user and the bug triagers.
|
|
*
|
|
* Our policy for removing pre-production workarounds is to keep the
|
|
* current gen workarounds as a guide to the bring-up of the next gen
|
|
* (workarounds have a habit of persisting!). Anything older than that
|
|
* should be removed along with the complications they introduce.
|
|
*/
|
|
static void intel_detect_preproduction_hw(struct drm_i915_private *dev_priv)
|
|
{
|
|
bool pre = false;
|
|
|
|
pre |= IS_HSW_EARLY_SDV(dev_priv);
|
|
pre |= IS_SKL_REVID(dev_priv, 0, SKL_REVID_F0);
|
|
pre |= IS_BXT_REVID(dev_priv, 0, BXT_REVID_B_LAST);
|
|
pre |= IS_KBL_REVID(dev_priv, 0, KBL_REVID_A0);
|
|
|
|
if (pre) {
|
|
DRM_ERROR("This is a pre-production stepping. "
|
|
"It may not be fully functional.\n");
|
|
add_taint(TAINT_MACHINE_CHECK, LOCKDEP_STILL_OK);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* i915_driver_init_early - setup state not requiring device access
|
|
* @dev_priv: device private
|
|
*
|
|
* Initialize everything that is a "SW-only" state, that is state not
|
|
* requiring accessing the device or exposing the driver via kernel internal
|
|
* or userspace interfaces. Example steps belonging here: lock initialization,
|
|
* system memory allocation, setting up device specific attributes and
|
|
* function hooks not requiring accessing the device.
|
|
*/
|
|
static int i915_driver_init_early(struct drm_i915_private *dev_priv)
|
|
{
|
|
int ret = 0;
|
|
|
|
if (i915_inject_load_failure())
|
|
return -ENODEV;
|
|
|
|
spin_lock_init(&dev_priv->irq_lock);
|
|
spin_lock_init(&dev_priv->gpu_error.lock);
|
|
mutex_init(&dev_priv->backlight_lock);
|
|
spin_lock_init(&dev_priv->uncore.lock);
|
|
|
|
mutex_init(&dev_priv->sb_lock);
|
|
mutex_init(&dev_priv->av_mutex);
|
|
mutex_init(&dev_priv->wm.wm_mutex);
|
|
mutex_init(&dev_priv->pps_mutex);
|
|
|
|
i915_memcpy_init_early(dev_priv);
|
|
intel_runtime_pm_init_early(dev_priv);
|
|
|
|
ret = i915_workqueues_init(dev_priv);
|
|
if (ret < 0)
|
|
goto err_engines;
|
|
|
|
ret = i915_gem_init_early(dev_priv);
|
|
if (ret < 0)
|
|
goto err_workqueues;
|
|
|
|
/* This must be called before any calls to HAS_PCH_* */
|
|
intel_detect_pch(dev_priv);
|
|
|
|
intel_wopcm_init_early(&dev_priv->wopcm);
|
|
intel_uc_init_early(dev_priv);
|
|
intel_pm_setup(dev_priv);
|
|
intel_init_dpio(dev_priv);
|
|
ret = intel_power_domains_init(dev_priv);
|
|
if (ret < 0)
|
|
goto err_uc;
|
|
intel_irq_init(dev_priv);
|
|
intel_hangcheck_init(dev_priv);
|
|
intel_init_display_hooks(dev_priv);
|
|
intel_init_clock_gating_hooks(dev_priv);
|
|
intel_init_audio_hooks(dev_priv);
|
|
intel_display_crc_init(dev_priv);
|
|
|
|
intel_detect_preproduction_hw(dev_priv);
|
|
|
|
return 0;
|
|
|
|
err_uc:
|
|
intel_uc_cleanup_early(dev_priv);
|
|
i915_gem_cleanup_early(dev_priv);
|
|
err_workqueues:
|
|
i915_workqueues_cleanup(dev_priv);
|
|
err_engines:
|
|
i915_engines_cleanup(dev_priv);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i915_driver_cleanup_early - cleanup the setup done in i915_driver_init_early()
|
|
* @dev_priv: device private
|
|
*/
|
|
static void i915_driver_cleanup_early(struct drm_i915_private *dev_priv)
|
|
{
|
|
intel_irq_fini(dev_priv);
|
|
intel_power_domains_cleanup(dev_priv);
|
|
intel_uc_cleanup_early(dev_priv);
|
|
i915_gem_cleanup_early(dev_priv);
|
|
i915_workqueues_cleanup(dev_priv);
|
|
i915_engines_cleanup(dev_priv);
|
|
}
|
|
|
|
static int i915_mmio_setup(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct pci_dev *pdev = dev_priv->drm.pdev;
|
|
int mmio_bar;
|
|
int mmio_size;
|
|
|
|
mmio_bar = IS_GEN(dev_priv, 2) ? 1 : 0;
|
|
/*
|
|
* Before gen4, the registers and the GTT are behind different BARs.
|
|
* However, from gen4 onwards, the registers and the GTT are shared
|
|
* in the same BAR, so we want to restrict this ioremap from
|
|
* clobbering the GTT which we want ioremap_wc instead. Fortunately,
|
|
* the register BAR remains the same size for all the earlier
|
|
* generations up to Ironlake.
|
|
*/
|
|
if (INTEL_GEN(dev_priv) < 5)
|
|
mmio_size = 512 * 1024;
|
|
else
|
|
mmio_size = 2 * 1024 * 1024;
|
|
dev_priv->regs = pci_iomap(pdev, mmio_bar, mmio_size);
|
|
if (dev_priv->regs == NULL) {
|
|
DRM_ERROR("failed to map registers\n");
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
/* Try to make sure MCHBAR is enabled before poking at it */
|
|
intel_setup_mchbar(dev_priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void i915_mmio_cleanup(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct pci_dev *pdev = dev_priv->drm.pdev;
|
|
|
|
intel_teardown_mchbar(dev_priv);
|
|
pci_iounmap(pdev, dev_priv->regs);
|
|
}
|
|
|
|
/**
|
|
* i915_driver_init_mmio - setup device MMIO
|
|
* @dev_priv: device private
|
|
*
|
|
* Setup minimal device state necessary for MMIO accesses later in the
|
|
* initialization sequence. The setup here should avoid any other device-wide
|
|
* side effects or exposing the driver via kernel internal or user space
|
|
* interfaces.
|
|
*/
|
|
static int i915_driver_init_mmio(struct drm_i915_private *dev_priv)
|
|
{
|
|
int ret;
|
|
|
|
if (i915_inject_load_failure())
|
|
return -ENODEV;
|
|
|
|
if (i915_get_bridge_dev(dev_priv))
|
|
return -EIO;
|
|
|
|
ret = i915_mmio_setup(dev_priv);
|
|
if (ret < 0)
|
|
goto err_bridge;
|
|
|
|
intel_uncore_init(dev_priv);
|
|
|
|
intel_device_info_init_mmio(dev_priv);
|
|
|
|
intel_uncore_prune(dev_priv);
|
|
|
|
intel_uc_init_mmio(dev_priv);
|
|
|
|
ret = intel_engines_init_mmio(dev_priv);
|
|
if (ret)
|
|
goto err_uncore;
|
|
|
|
i915_gem_init_mmio(dev_priv);
|
|
|
|
return 0;
|
|
|
|
err_uncore:
|
|
intel_uncore_fini(dev_priv);
|
|
i915_mmio_cleanup(dev_priv);
|
|
err_bridge:
|
|
pci_dev_put(dev_priv->bridge_dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i915_driver_cleanup_mmio - cleanup the setup done in i915_driver_init_mmio()
|
|
* @dev_priv: device private
|
|
*/
|
|
static void i915_driver_cleanup_mmio(struct drm_i915_private *dev_priv)
|
|
{
|
|
intel_uncore_fini(dev_priv);
|
|
i915_mmio_cleanup(dev_priv);
|
|
pci_dev_put(dev_priv->bridge_dev);
|
|
}
|
|
|
|
static void intel_sanitize_options(struct drm_i915_private *dev_priv)
|
|
{
|
|
intel_gvt_sanitize_options(dev_priv);
|
|
}
|
|
|
|
static enum dram_rank skl_get_dimm_rank(u8 size, u32 rank)
|
|
{
|
|
if (size == 0)
|
|
return I915_DRAM_RANK_INVALID;
|
|
if (rank == SKL_DRAM_RANK_SINGLE)
|
|
return I915_DRAM_RANK_SINGLE;
|
|
else if (rank == SKL_DRAM_RANK_DUAL)
|
|
return I915_DRAM_RANK_DUAL;
|
|
|
|
return I915_DRAM_RANK_INVALID;
|
|
}
|
|
|
|
static bool
|
|
skl_is_16gb_dimm(enum dram_rank rank, u8 size, u8 width)
|
|
{
|
|
if (rank == I915_DRAM_RANK_SINGLE && width == 8 && size == 16)
|
|
return true;
|
|
else if (rank == I915_DRAM_RANK_DUAL && width == 8 && size == 32)
|
|
return true;
|
|
else if (rank == SKL_DRAM_RANK_SINGLE && width == 16 && size == 8)
|
|
return true;
|
|
else if (rank == SKL_DRAM_RANK_DUAL && width == 16 && size == 16)
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static int
|
|
skl_dram_get_channel_info(struct dram_channel_info *ch, u32 val)
|
|
{
|
|
u32 tmp_l, tmp_s;
|
|
u32 s_val = val >> SKL_DRAM_S_SHIFT;
|
|
|
|
if (!val)
|
|
return -EINVAL;
|
|
|
|
tmp_l = val & SKL_DRAM_SIZE_MASK;
|
|
tmp_s = s_val & SKL_DRAM_SIZE_MASK;
|
|
|
|
if (tmp_l == 0 && tmp_s == 0)
|
|
return -EINVAL;
|
|
|
|
ch->l_info.size = tmp_l;
|
|
ch->s_info.size = tmp_s;
|
|
|
|
tmp_l = (val & SKL_DRAM_WIDTH_MASK) >> SKL_DRAM_WIDTH_SHIFT;
|
|
tmp_s = (s_val & SKL_DRAM_WIDTH_MASK) >> SKL_DRAM_WIDTH_SHIFT;
|
|
ch->l_info.width = (1 << tmp_l) * 8;
|
|
ch->s_info.width = (1 << tmp_s) * 8;
|
|
|
|
tmp_l = val & SKL_DRAM_RANK_MASK;
|
|
tmp_s = s_val & SKL_DRAM_RANK_MASK;
|
|
ch->l_info.rank = skl_get_dimm_rank(ch->l_info.size, tmp_l);
|
|
ch->s_info.rank = skl_get_dimm_rank(ch->s_info.size, tmp_s);
|
|
|
|
if (ch->l_info.rank == I915_DRAM_RANK_DUAL ||
|
|
ch->s_info.rank == I915_DRAM_RANK_DUAL)
|
|
ch->rank = I915_DRAM_RANK_DUAL;
|
|
else if (ch->l_info.rank == I915_DRAM_RANK_SINGLE &&
|
|
ch->s_info.rank == I915_DRAM_RANK_SINGLE)
|
|
ch->rank = I915_DRAM_RANK_DUAL;
|
|
else
|
|
ch->rank = I915_DRAM_RANK_SINGLE;
|
|
|
|
ch->is_16gb_dimm = skl_is_16gb_dimm(ch->l_info.rank, ch->l_info.size,
|
|
ch->l_info.width) ||
|
|
skl_is_16gb_dimm(ch->s_info.rank, ch->s_info.size,
|
|
ch->s_info.width);
|
|
|
|
DRM_DEBUG_KMS("(size:width:rank) L(%dGB:X%d:%s) S(%dGB:X%d:%s)\n",
|
|
ch->l_info.size, ch->l_info.width,
|
|
ch->l_info.rank ? "dual" : "single",
|
|
ch->s_info.size, ch->s_info.width,
|
|
ch->s_info.rank ? "dual" : "single");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool
|
|
intel_is_dram_symmetric(u32 val_ch0, u32 val_ch1,
|
|
struct dram_channel_info *ch0)
|
|
{
|
|
return (val_ch0 == val_ch1 &&
|
|
(ch0->s_info.size == 0 ||
|
|
(ch0->l_info.size == ch0->s_info.size &&
|
|
ch0->l_info.width == ch0->s_info.width &&
|
|
ch0->l_info.rank == ch0->s_info.rank)));
|
|
}
|
|
|
|
static int
|
|
skl_dram_get_channels_info(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct dram_info *dram_info = &dev_priv->dram_info;
|
|
struct dram_channel_info ch0, ch1;
|
|
u32 val_ch0, val_ch1;
|
|
int ret;
|
|
|
|
val_ch0 = I915_READ(SKL_MAD_DIMM_CH0_0_0_0_MCHBAR_MCMAIN);
|
|
ret = skl_dram_get_channel_info(&ch0, val_ch0);
|
|
if (ret == 0)
|
|
dram_info->num_channels++;
|
|
|
|
val_ch1 = I915_READ(SKL_MAD_DIMM_CH1_0_0_0_MCHBAR_MCMAIN);
|
|
ret = skl_dram_get_channel_info(&ch1, val_ch1);
|
|
if (ret == 0)
|
|
dram_info->num_channels++;
|
|
|
|
if (dram_info->num_channels == 0) {
|
|
DRM_INFO("Number of memory channels is zero\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* If any of the channel is single rank channel, worst case output
|
|
* will be same as if single rank memory, so consider single rank
|
|
* memory.
|
|
*/
|
|
if (ch0.rank == I915_DRAM_RANK_SINGLE ||
|
|
ch1.rank == I915_DRAM_RANK_SINGLE)
|
|
dram_info->rank = I915_DRAM_RANK_SINGLE;
|
|
else
|
|
dram_info->rank = max(ch0.rank, ch1.rank);
|
|
|
|
if (dram_info->rank == I915_DRAM_RANK_INVALID) {
|
|
DRM_INFO("couldn't get memory rank information\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dram_info->is_16gb_dimm = ch0.is_16gb_dimm || ch1.is_16gb_dimm;
|
|
|
|
dev_priv->dram_info.symmetric_memory = intel_is_dram_symmetric(val_ch0,
|
|
val_ch1,
|
|
&ch0);
|
|
|
|
DRM_DEBUG_KMS("memory configuration is %sSymmetric memory\n",
|
|
dev_priv->dram_info.symmetric_memory ? "" : "not ");
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
skl_get_dram_info(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct dram_info *dram_info = &dev_priv->dram_info;
|
|
u32 mem_freq_khz, val;
|
|
int ret;
|
|
|
|
ret = skl_dram_get_channels_info(dev_priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
val = I915_READ(SKL_MC_BIOS_DATA_0_0_0_MCHBAR_PCU);
|
|
mem_freq_khz = DIV_ROUND_UP((val & SKL_REQ_DATA_MASK) *
|
|
SKL_MEMORY_FREQ_MULTIPLIER_HZ, 1000);
|
|
|
|
dram_info->bandwidth_kbps = dram_info->num_channels *
|
|
mem_freq_khz * 8;
|
|
|
|
if (dram_info->bandwidth_kbps == 0) {
|
|
DRM_INFO("Couldn't get system memory bandwidth\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dram_info->valid = true;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
bxt_get_dram_info(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct dram_info *dram_info = &dev_priv->dram_info;
|
|
u32 dram_channels;
|
|
u32 mem_freq_khz, val;
|
|
u8 num_active_channels;
|
|
int i;
|
|
|
|
val = I915_READ(BXT_P_CR_MC_BIOS_REQ_0_0_0);
|
|
mem_freq_khz = DIV_ROUND_UP((val & BXT_REQ_DATA_MASK) *
|
|
BXT_MEMORY_FREQ_MULTIPLIER_HZ, 1000);
|
|
|
|
dram_channels = val & BXT_DRAM_CHANNEL_ACTIVE_MASK;
|
|
num_active_channels = hweight32(dram_channels);
|
|
|
|
/* Each active bit represents 4-byte channel */
|
|
dram_info->bandwidth_kbps = (mem_freq_khz * num_active_channels * 4);
|
|
|
|
if (dram_info->bandwidth_kbps == 0) {
|
|
DRM_INFO("Couldn't get system memory bandwidth\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* Now read each DUNIT8/9/10/11 to check the rank of each dimms.
|
|
*/
|
|
for (i = BXT_D_CR_DRP0_DUNIT_START; i <= BXT_D_CR_DRP0_DUNIT_END; i++) {
|
|
u8 size, width;
|
|
enum dram_rank rank;
|
|
u32 tmp;
|
|
|
|
val = I915_READ(BXT_D_CR_DRP0_DUNIT(i));
|
|
if (val == 0xFFFFFFFF)
|
|
continue;
|
|
|
|
dram_info->num_channels++;
|
|
tmp = val & BXT_DRAM_RANK_MASK;
|
|
|
|
if (tmp == BXT_DRAM_RANK_SINGLE)
|
|
rank = I915_DRAM_RANK_SINGLE;
|
|
else if (tmp == BXT_DRAM_RANK_DUAL)
|
|
rank = I915_DRAM_RANK_DUAL;
|
|
else
|
|
rank = I915_DRAM_RANK_INVALID;
|
|
|
|
tmp = val & BXT_DRAM_SIZE_MASK;
|
|
if (tmp == BXT_DRAM_SIZE_4GB)
|
|
size = 4;
|
|
else if (tmp == BXT_DRAM_SIZE_6GB)
|
|
size = 6;
|
|
else if (tmp == BXT_DRAM_SIZE_8GB)
|
|
size = 8;
|
|
else if (tmp == BXT_DRAM_SIZE_12GB)
|
|
size = 12;
|
|
else if (tmp == BXT_DRAM_SIZE_16GB)
|
|
size = 16;
|
|
else
|
|
size = 0;
|
|
|
|
tmp = (val & BXT_DRAM_WIDTH_MASK) >> BXT_DRAM_WIDTH_SHIFT;
|
|
width = (1 << tmp) * 8;
|
|
DRM_DEBUG_KMS("dram size:%dGB width:X%d rank:%s\n", size,
|
|
width, rank == I915_DRAM_RANK_SINGLE ? "single" :
|
|
rank == I915_DRAM_RANK_DUAL ? "dual" : "unknown");
|
|
|
|
/*
|
|
* If any of the channel is single rank channel,
|
|
* worst case output will be same as if single rank
|
|
* memory, so consider single rank memory.
|
|
*/
|
|
if (dram_info->rank == I915_DRAM_RANK_INVALID)
|
|
dram_info->rank = rank;
|
|
else if (rank == I915_DRAM_RANK_SINGLE)
|
|
dram_info->rank = I915_DRAM_RANK_SINGLE;
|
|
}
|
|
|
|
if (dram_info->rank == I915_DRAM_RANK_INVALID) {
|
|
DRM_INFO("couldn't get memory rank information\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
dram_info->valid = true;
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
intel_get_dram_info(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct dram_info *dram_info = &dev_priv->dram_info;
|
|
char bandwidth_str[32];
|
|
int ret;
|
|
|
|
dram_info->valid = false;
|
|
dram_info->rank = I915_DRAM_RANK_INVALID;
|
|
dram_info->bandwidth_kbps = 0;
|
|
dram_info->num_channels = 0;
|
|
|
|
/*
|
|
* Assume 16Gb DIMMs are present until proven otherwise.
|
|
* This is only used for the level 0 watermark latency
|
|
* w/a which does not apply to bxt/glk.
|
|
*/
|
|
dram_info->is_16gb_dimm = !IS_GEN9_LP(dev_priv);
|
|
|
|
if (INTEL_GEN(dev_priv) < 9 || IS_GEMINILAKE(dev_priv))
|
|
return;
|
|
|
|
/* Need to calculate bandwidth only for Gen9 */
|
|
if (IS_BROXTON(dev_priv))
|
|
ret = bxt_get_dram_info(dev_priv);
|
|
else if (IS_GEN(dev_priv, 9))
|
|
ret = skl_get_dram_info(dev_priv);
|
|
else
|
|
ret = skl_dram_get_channels_info(dev_priv);
|
|
if (ret)
|
|
return;
|
|
|
|
if (dram_info->bandwidth_kbps)
|
|
sprintf(bandwidth_str, "%d KBps", dram_info->bandwidth_kbps);
|
|
else
|
|
sprintf(bandwidth_str, "unknown");
|
|
DRM_DEBUG_KMS("DRAM bandwidth:%s, total-channels: %u\n",
|
|
bandwidth_str, dram_info->num_channels);
|
|
DRM_DEBUG_KMS("DRAM rank: %s rank 16GB-dimm:%s\n",
|
|
(dram_info->rank == I915_DRAM_RANK_DUAL) ?
|
|
"dual" : "single", yesno(dram_info->is_16gb_dimm));
|
|
}
|
|
|
|
/**
|
|
* i915_driver_init_hw - setup state requiring device access
|
|
* @dev_priv: device private
|
|
*
|
|
* Setup state that requires accessing the device, but doesn't require
|
|
* exposing the driver via kernel internal or userspace interfaces.
|
|
*/
|
|
static int i915_driver_init_hw(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct pci_dev *pdev = dev_priv->drm.pdev;
|
|
int ret;
|
|
|
|
if (i915_inject_load_failure())
|
|
return -ENODEV;
|
|
|
|
intel_device_info_runtime_init(dev_priv);
|
|
|
|
if (HAS_PPGTT(dev_priv)) {
|
|
if (intel_vgpu_active(dev_priv) &&
|
|
!intel_vgpu_has_full_48bit_ppgtt(dev_priv)) {
|
|
i915_report_error(dev_priv,
|
|
"incompatible vGPU found, support for isolated ppGTT required\n");
|
|
return -ENXIO;
|
|
}
|
|
}
|
|
|
|
if (HAS_EXECLISTS(dev_priv)) {
|
|
/*
|
|
* Older GVT emulation depends upon intercepting CSB mmio,
|
|
* which we no longer use, preferring to use the HWSP cache
|
|
* instead.
|
|
*/
|
|
if (intel_vgpu_active(dev_priv) &&
|
|
!intel_vgpu_has_hwsp_emulation(dev_priv)) {
|
|
i915_report_error(dev_priv,
|
|
"old vGPU host found, support for HWSP emulation required\n");
|
|
return -ENXIO;
|
|
}
|
|
}
|
|
|
|
intel_sanitize_options(dev_priv);
|
|
|
|
i915_perf_init(dev_priv);
|
|
|
|
ret = i915_ggtt_probe_hw(dev_priv);
|
|
if (ret)
|
|
goto err_perf;
|
|
|
|
/*
|
|
* WARNING: Apparently we must kick fbdev drivers before vgacon,
|
|
* otherwise the vga fbdev driver falls over.
|
|
*/
|
|
ret = i915_kick_out_firmware_fb(dev_priv);
|
|
if (ret) {
|
|
DRM_ERROR("failed to remove conflicting framebuffer drivers\n");
|
|
goto err_ggtt;
|
|
}
|
|
|
|
ret = i915_kick_out_vgacon(dev_priv);
|
|
if (ret) {
|
|
DRM_ERROR("failed to remove conflicting VGA console\n");
|
|
goto err_ggtt;
|
|
}
|
|
|
|
ret = i915_ggtt_init_hw(dev_priv);
|
|
if (ret)
|
|
goto err_ggtt;
|
|
|
|
ret = i915_ggtt_enable_hw(dev_priv);
|
|
if (ret) {
|
|
DRM_ERROR("failed to enable GGTT\n");
|
|
goto err_ggtt;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
/* overlay on gen2 is broken and can't address above 1G */
|
|
if (IS_GEN(dev_priv, 2)) {
|
|
ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(30));
|
|
if (ret) {
|
|
DRM_ERROR("failed to set DMA mask\n");
|
|
|
|
goto err_ggtt;
|
|
}
|
|
}
|
|
|
|
/* 965GM sometimes incorrectly writes to hardware status page (HWS)
|
|
* using 32bit addressing, overwriting memory if HWS is located
|
|
* above 4GB.
|
|
*
|
|
* The documentation also mentions an issue with undefined
|
|
* behaviour if any general state is accessed within a page above 4GB,
|
|
* which also needs to be handled carefully.
|
|
*/
|
|
if (IS_I965G(dev_priv) || IS_I965GM(dev_priv)) {
|
|
ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
|
|
|
|
if (ret) {
|
|
DRM_ERROR("failed to set DMA mask\n");
|
|
|
|
goto err_ggtt;
|
|
}
|
|
}
|
|
|
|
pm_qos_add_request(&dev_priv->pm_qos, PM_QOS_CPU_DMA_LATENCY,
|
|
PM_QOS_DEFAULT_VALUE);
|
|
|
|
intel_uncore_sanitize(dev_priv);
|
|
|
|
intel_gt_init_workarounds(dev_priv);
|
|
i915_gem_load_init_fences(dev_priv);
|
|
|
|
/* On the 945G/GM, the chipset reports the MSI capability on the
|
|
* integrated graphics even though the support isn't actually there
|
|
* according to the published specs. It doesn't appear to function
|
|
* correctly in testing on 945G.
|
|
* This may be a side effect of MSI having been made available for PEG
|
|
* and the registers being closely associated.
|
|
*
|
|
* According to chipset errata, on the 965GM, MSI interrupts may
|
|
* be lost or delayed, and was defeatured. MSI interrupts seem to
|
|
* get lost on g4x as well, and interrupt delivery seems to stay
|
|
* properly dead afterwards. So we'll just disable them for all
|
|
* pre-gen5 chipsets.
|
|
*
|
|
* dp aux and gmbus irq on gen4 seems to be able to generate legacy
|
|
* interrupts even when in MSI mode. This results in spurious
|
|
* interrupt warnings if the legacy irq no. is shared with another
|
|
* device. The kernel then disables that interrupt source and so
|
|
* prevents the other device from working properly.
|
|
*/
|
|
if (INTEL_GEN(dev_priv) >= 5) {
|
|
if (pci_enable_msi(pdev) < 0)
|
|
DRM_DEBUG_DRIVER("can't enable MSI");
|
|
}
|
|
|
|
ret = intel_gvt_init(dev_priv);
|
|
if (ret)
|
|
goto err_msi;
|
|
|
|
intel_opregion_setup(dev_priv);
|
|
/*
|
|
* Fill the dram structure to get the system raw bandwidth and
|
|
* dram info. This will be used for memory latency calculation.
|
|
*/
|
|
intel_get_dram_info(dev_priv);
|
|
|
|
|
|
return 0;
|
|
|
|
err_msi:
|
|
if (pdev->msi_enabled)
|
|
pci_disable_msi(pdev);
|
|
pm_qos_remove_request(&dev_priv->pm_qos);
|
|
err_ggtt:
|
|
i915_ggtt_cleanup_hw(dev_priv);
|
|
err_perf:
|
|
i915_perf_fini(dev_priv);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* i915_driver_cleanup_hw - cleanup the setup done in i915_driver_init_hw()
|
|
* @dev_priv: device private
|
|
*/
|
|
static void i915_driver_cleanup_hw(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct pci_dev *pdev = dev_priv->drm.pdev;
|
|
|
|
i915_perf_fini(dev_priv);
|
|
|
|
if (pdev->msi_enabled)
|
|
pci_disable_msi(pdev);
|
|
|
|
pm_qos_remove_request(&dev_priv->pm_qos);
|
|
i915_ggtt_cleanup_hw(dev_priv);
|
|
}
|
|
|
|
/**
|
|
* i915_driver_register - register the driver with the rest of the system
|
|
* @dev_priv: device private
|
|
*
|
|
* Perform any steps necessary to make the driver available via kernel
|
|
* internal or userspace interfaces.
|
|
*/
|
|
static void i915_driver_register(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct drm_device *dev = &dev_priv->drm;
|
|
|
|
i915_gem_shrinker_register(dev_priv);
|
|
i915_pmu_register(dev_priv);
|
|
|
|
/*
|
|
* Notify a valid surface after modesetting,
|
|
* when running inside a VM.
|
|
*/
|
|
if (intel_vgpu_active(dev_priv))
|
|
I915_WRITE(vgtif_reg(display_ready), VGT_DRV_DISPLAY_READY);
|
|
|
|
/* Reveal our presence to userspace */
|
|
if (drm_dev_register(dev, 0) == 0) {
|
|
i915_debugfs_register(dev_priv);
|
|
i915_setup_sysfs(dev_priv);
|
|
|
|
/* Depends on sysfs having been initialized */
|
|
i915_perf_register(dev_priv);
|
|
} else
|
|
DRM_ERROR("Failed to register driver for userspace access!\n");
|
|
|
|
if (HAS_DISPLAY(dev_priv)) {
|
|
/* Must be done after probing outputs */
|
|
intel_opregion_register(dev_priv);
|
|
acpi_video_register();
|
|
}
|
|
|
|
if (IS_GEN(dev_priv, 5))
|
|
intel_gpu_ips_init(dev_priv);
|
|
|
|
intel_audio_init(dev_priv);
|
|
|
|
/*
|
|
* Some ports require correctly set-up hpd registers for detection to
|
|
* work properly (leading to ghost connected connector status), e.g. VGA
|
|
* on gm45. Hence we can only set up the initial fbdev config after hpd
|
|
* irqs are fully enabled. We do it last so that the async config
|
|
* cannot run before the connectors are registered.
|
|
*/
|
|
intel_fbdev_initial_config_async(dev);
|
|
|
|
/*
|
|
* We need to coordinate the hotplugs with the asynchronous fbdev
|
|
* configuration, for which we use the fbdev->async_cookie.
|
|
*/
|
|
if (HAS_DISPLAY(dev_priv))
|
|
drm_kms_helper_poll_init(dev);
|
|
|
|
intel_power_domains_enable(dev_priv);
|
|
intel_runtime_pm_enable(dev_priv);
|
|
}
|
|
|
|
/**
|
|
* i915_driver_unregister - cleanup the registration done in i915_driver_regiser()
|
|
* @dev_priv: device private
|
|
*/
|
|
static void i915_driver_unregister(struct drm_i915_private *dev_priv)
|
|
{
|
|
intel_runtime_pm_disable(dev_priv);
|
|
intel_power_domains_disable(dev_priv);
|
|
|
|
intel_fbdev_unregister(dev_priv);
|
|
intel_audio_deinit(dev_priv);
|
|
|
|
/*
|
|
* After flushing the fbdev (incl. a late async config which will
|
|
* have delayed queuing of a hotplug event), then flush the hotplug
|
|
* events.
|
|
*/
|
|
drm_kms_helper_poll_fini(&dev_priv->drm);
|
|
|
|
intel_gpu_ips_teardown();
|
|
acpi_video_unregister();
|
|
intel_opregion_unregister(dev_priv);
|
|
|
|
i915_perf_unregister(dev_priv);
|
|
i915_pmu_unregister(dev_priv);
|
|
|
|
i915_teardown_sysfs(dev_priv);
|
|
drm_dev_unregister(&dev_priv->drm);
|
|
|
|
i915_gem_shrinker_unregister(dev_priv);
|
|
}
|
|
|
|
static void i915_welcome_messages(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (drm_debug & DRM_UT_DRIVER) {
|
|
struct drm_printer p = drm_debug_printer("i915 device info:");
|
|
|
|
drm_printf(&p, "pciid=0x%04x rev=0x%02x platform=%s gen=%i\n",
|
|
INTEL_DEVID(dev_priv),
|
|
INTEL_REVID(dev_priv),
|
|
intel_platform_name(INTEL_INFO(dev_priv)->platform),
|
|
INTEL_GEN(dev_priv));
|
|
|
|
intel_device_info_dump_flags(INTEL_INFO(dev_priv), &p);
|
|
intel_device_info_dump_runtime(RUNTIME_INFO(dev_priv), &p);
|
|
}
|
|
|
|
if (IS_ENABLED(CONFIG_DRM_I915_DEBUG))
|
|
DRM_INFO("DRM_I915_DEBUG enabled\n");
|
|
if (IS_ENABLED(CONFIG_DRM_I915_DEBUG_GEM))
|
|
DRM_INFO("DRM_I915_DEBUG_GEM enabled\n");
|
|
if (IS_ENABLED(CONFIG_DRM_I915_DEBUG_RUNTIME_PM))
|
|
DRM_INFO("DRM_I915_DEBUG_RUNTIME_PM enabled\n");
|
|
}
|
|
|
|
static struct drm_i915_private *
|
|
i915_driver_create(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
const struct intel_device_info *match_info =
|
|
(struct intel_device_info *)ent->driver_data;
|
|
struct intel_device_info *device_info;
|
|
struct drm_i915_private *i915;
|
|
int err;
|
|
|
|
i915 = kzalloc(sizeof(*i915), GFP_KERNEL);
|
|
if (!i915)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
err = drm_dev_init(&i915->drm, &driver, &pdev->dev);
|
|
if (err) {
|
|
kfree(i915);
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
i915->drm.pdev = pdev;
|
|
i915->drm.dev_private = i915;
|
|
pci_set_drvdata(pdev, &i915->drm);
|
|
|
|
/* Setup the write-once "constant" device info */
|
|
device_info = mkwrite_device_info(i915);
|
|
memcpy(device_info, match_info, sizeof(*device_info));
|
|
RUNTIME_INFO(i915)->device_id = pdev->device;
|
|
|
|
BUILD_BUG_ON(INTEL_MAX_PLATFORMS >
|
|
BITS_PER_TYPE(device_info->platform_mask));
|
|
BUG_ON(device_info->gen > BITS_PER_TYPE(device_info->gen_mask));
|
|
|
|
return i915;
|
|
}
|
|
|
|
static void i915_driver_destroy(struct drm_i915_private *i915)
|
|
{
|
|
struct pci_dev *pdev = i915->drm.pdev;
|
|
|
|
drm_dev_fini(&i915->drm);
|
|
kfree(i915);
|
|
|
|
/* And make sure we never chase our dangling pointer from pci_dev */
|
|
pci_set_drvdata(pdev, NULL);
|
|
}
|
|
|
|
/**
|
|
* i915_driver_load - setup chip and create an initial config
|
|
* @pdev: PCI device
|
|
* @ent: matching PCI ID entry
|
|
*
|
|
* The driver load routine has to do several things:
|
|
* - drive output discovery via intel_modeset_init()
|
|
* - initialize the memory manager
|
|
* - allocate initial config memory
|
|
* - setup the DRM framebuffer with the allocated memory
|
|
*/
|
|
int i915_driver_load(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
const struct intel_device_info *match_info =
|
|
(struct intel_device_info *)ent->driver_data;
|
|
struct drm_i915_private *dev_priv;
|
|
int ret;
|
|
|
|
dev_priv = i915_driver_create(pdev, ent);
|
|
if (IS_ERR(dev_priv))
|
|
return PTR_ERR(dev_priv);
|
|
|
|
/* Disable nuclear pageflip by default on pre-ILK */
|
|
if (!i915_modparams.nuclear_pageflip && match_info->gen < 5)
|
|
dev_priv->drm.driver_features &= ~DRIVER_ATOMIC;
|
|
|
|
ret = pci_enable_device(pdev);
|
|
if (ret)
|
|
goto out_fini;
|
|
|
|
ret = i915_driver_init_early(dev_priv);
|
|
if (ret < 0)
|
|
goto out_pci_disable;
|
|
|
|
disable_rpm_wakeref_asserts(dev_priv);
|
|
|
|
ret = i915_driver_init_mmio(dev_priv);
|
|
if (ret < 0)
|
|
goto out_runtime_pm_put;
|
|
|
|
ret = i915_driver_init_hw(dev_priv);
|
|
if (ret < 0)
|
|
goto out_cleanup_mmio;
|
|
|
|
ret = i915_load_modeset_init(&dev_priv->drm);
|
|
if (ret < 0)
|
|
goto out_cleanup_hw;
|
|
|
|
i915_driver_register(dev_priv);
|
|
|
|
enable_rpm_wakeref_asserts(dev_priv);
|
|
|
|
i915_welcome_messages(dev_priv);
|
|
|
|
return 0;
|
|
|
|
out_cleanup_hw:
|
|
i915_driver_cleanup_hw(dev_priv);
|
|
out_cleanup_mmio:
|
|
i915_driver_cleanup_mmio(dev_priv);
|
|
out_runtime_pm_put:
|
|
enable_rpm_wakeref_asserts(dev_priv);
|
|
i915_driver_cleanup_early(dev_priv);
|
|
out_pci_disable:
|
|
pci_disable_device(pdev);
|
|
out_fini:
|
|
i915_load_error(dev_priv, "Device initialization failed (%d)\n", ret);
|
|
i915_driver_destroy(dev_priv);
|
|
return ret;
|
|
}
|
|
|
|
void i915_driver_unload(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct pci_dev *pdev = dev_priv->drm.pdev;
|
|
|
|
disable_rpm_wakeref_asserts(dev_priv);
|
|
|
|
i915_driver_unregister(dev_priv);
|
|
|
|
/* Flush any external code that still may be under the RCU lock */
|
|
synchronize_rcu();
|
|
|
|
if (i915_gem_suspend(dev_priv))
|
|
DRM_ERROR("failed to idle hardware; continuing to unload!\n");
|
|
|
|
drm_atomic_helper_shutdown(dev);
|
|
|
|
intel_gvt_cleanup(dev_priv);
|
|
|
|
intel_modeset_cleanup(dev);
|
|
|
|
intel_bios_cleanup(dev_priv);
|
|
|
|
vga_switcheroo_unregister_client(pdev);
|
|
vga_client_register(pdev, NULL, NULL, NULL);
|
|
|
|
intel_csr_ucode_fini(dev_priv);
|
|
|
|
/* Free error state after interrupts are fully disabled. */
|
|
cancel_delayed_work_sync(&dev_priv->gpu_error.hangcheck_work);
|
|
i915_reset_error_state(dev_priv);
|
|
|
|
i915_gem_fini(dev_priv);
|
|
|
|
intel_power_domains_fini_hw(dev_priv);
|
|
|
|
i915_driver_cleanup_hw(dev_priv);
|
|
i915_driver_cleanup_mmio(dev_priv);
|
|
|
|
enable_rpm_wakeref_asserts(dev_priv);
|
|
intel_runtime_pm_cleanup(dev_priv);
|
|
}
|
|
|
|
static void i915_driver_release(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
|
|
i915_driver_cleanup_early(dev_priv);
|
|
i915_driver_destroy(dev_priv);
|
|
}
|
|
|
|
static int i915_driver_open(struct drm_device *dev, struct drm_file *file)
|
|
{
|
|
struct drm_i915_private *i915 = to_i915(dev);
|
|
int ret;
|
|
|
|
ret = i915_gem_open(i915, file);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* i915_driver_lastclose - clean up after all DRM clients have exited
|
|
* @dev: DRM device
|
|
*
|
|
* Take care of cleaning up after all DRM clients have exited. In the
|
|
* mode setting case, we want to restore the kernel's initial mode (just
|
|
* in case the last client left us in a bad state).
|
|
*
|
|
* Additionally, in the non-mode setting case, we'll tear down the GTT
|
|
* and DMA structures, since the kernel won't be using them, and clea
|
|
* up any GEM state.
|
|
*/
|
|
static void i915_driver_lastclose(struct drm_device *dev)
|
|
{
|
|
intel_fbdev_restore_mode(dev);
|
|
vga_switcheroo_process_delayed_switch();
|
|
}
|
|
|
|
static void i915_driver_postclose(struct drm_device *dev, struct drm_file *file)
|
|
{
|
|
struct drm_i915_file_private *file_priv = file->driver_priv;
|
|
|
|
mutex_lock(&dev->struct_mutex);
|
|
i915_gem_context_close(file);
|
|
i915_gem_release(dev, file);
|
|
mutex_unlock(&dev->struct_mutex);
|
|
|
|
kfree(file_priv);
|
|
}
|
|
|
|
static void intel_suspend_encoders(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct drm_device *dev = &dev_priv->drm;
|
|
struct intel_encoder *encoder;
|
|
|
|
drm_modeset_lock_all(dev);
|
|
for_each_intel_encoder(dev, encoder)
|
|
if (encoder->suspend)
|
|
encoder->suspend(encoder);
|
|
drm_modeset_unlock_all(dev);
|
|
}
|
|
|
|
static int vlv_resume_prepare(struct drm_i915_private *dev_priv,
|
|
bool rpm_resume);
|
|
static int vlv_suspend_complete(struct drm_i915_private *dev_priv);
|
|
|
|
static bool suspend_to_idle(struct drm_i915_private *dev_priv)
|
|
{
|
|
#if IS_ENABLED(CONFIG_ACPI_SLEEP)
|
|
if (acpi_target_system_state() < ACPI_STATE_S3)
|
|
return true;
|
|
#endif
|
|
return false;
|
|
}
|
|
|
|
static int i915_drm_prepare(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *i915 = to_i915(dev);
|
|
int err;
|
|
|
|
/*
|
|
* NB intel_display_suspend() may issue new requests after we've
|
|
* ostensibly marked the GPU as ready-to-sleep here. We need to
|
|
* split out that work and pull it forward so that after point,
|
|
* the GPU is not woken again.
|
|
*/
|
|
err = i915_gem_suspend(i915);
|
|
if (err)
|
|
dev_err(&i915->drm.pdev->dev,
|
|
"GEM idle failed, suspend/resume might fail\n");
|
|
|
|
return err;
|
|
}
|
|
|
|
static int i915_drm_suspend(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct pci_dev *pdev = dev_priv->drm.pdev;
|
|
pci_power_t opregion_target_state;
|
|
|
|
disable_rpm_wakeref_asserts(dev_priv);
|
|
|
|
/* We do a lot of poking in a lot of registers, make sure they work
|
|
* properly. */
|
|
intel_power_domains_disable(dev_priv);
|
|
|
|
drm_kms_helper_poll_disable(dev);
|
|
|
|
pci_save_state(pdev);
|
|
|
|
intel_display_suspend(dev);
|
|
|
|
intel_dp_mst_suspend(dev_priv);
|
|
|
|
intel_runtime_pm_disable_interrupts(dev_priv);
|
|
intel_hpd_cancel_work(dev_priv);
|
|
|
|
intel_suspend_encoders(dev_priv);
|
|
|
|
intel_suspend_hw(dev_priv);
|
|
|
|
i915_gem_suspend_gtt_mappings(dev_priv);
|
|
|
|
i915_save_state(dev_priv);
|
|
|
|
opregion_target_state = suspend_to_idle(dev_priv) ? PCI_D1 : PCI_D3cold;
|
|
intel_opregion_suspend(dev_priv, opregion_target_state);
|
|
|
|
intel_fbdev_set_suspend(dev, FBINFO_STATE_SUSPENDED, true);
|
|
|
|
dev_priv->suspend_count++;
|
|
|
|
intel_csr_ucode_suspend(dev_priv);
|
|
|
|
enable_rpm_wakeref_asserts(dev_priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static enum i915_drm_suspend_mode
|
|
get_suspend_mode(struct drm_i915_private *dev_priv, bool hibernate)
|
|
{
|
|
if (hibernate)
|
|
return I915_DRM_SUSPEND_HIBERNATE;
|
|
|
|
if (suspend_to_idle(dev_priv))
|
|
return I915_DRM_SUSPEND_IDLE;
|
|
|
|
return I915_DRM_SUSPEND_MEM;
|
|
}
|
|
|
|
static int i915_drm_suspend_late(struct drm_device *dev, bool hibernation)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct pci_dev *pdev = dev_priv->drm.pdev;
|
|
int ret;
|
|
|
|
disable_rpm_wakeref_asserts(dev_priv);
|
|
|
|
i915_gem_suspend_late(dev_priv);
|
|
|
|
intel_uncore_suspend(dev_priv);
|
|
|
|
intel_power_domains_suspend(dev_priv,
|
|
get_suspend_mode(dev_priv, hibernation));
|
|
|
|
ret = 0;
|
|
if (INTEL_GEN(dev_priv) >= 11 || IS_GEN9_LP(dev_priv))
|
|
bxt_enable_dc9(dev_priv);
|
|
else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv))
|
|
hsw_enable_pc8(dev_priv);
|
|
else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
|
|
ret = vlv_suspend_complete(dev_priv);
|
|
|
|
if (ret) {
|
|
DRM_ERROR("Suspend complete failed: %d\n", ret);
|
|
intel_power_domains_resume(dev_priv);
|
|
|
|
goto out;
|
|
}
|
|
|
|
pci_disable_device(pdev);
|
|
/*
|
|
* During hibernation on some platforms the BIOS may try to access
|
|
* the device even though it's already in D3 and hang the machine. So
|
|
* leave the device in D0 on those platforms and hope the BIOS will
|
|
* power down the device properly. The issue was seen on multiple old
|
|
* GENs with different BIOS vendors, so having an explicit blacklist
|
|
* is inpractical; apply the workaround on everything pre GEN6. The
|
|
* platforms where the issue was seen:
|
|
* Lenovo Thinkpad X301, X61s, X60, T60, X41
|
|
* Fujitsu FSC S7110
|
|
* Acer Aspire 1830T
|
|
*/
|
|
if (!(hibernation && INTEL_GEN(dev_priv) < 6))
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
|
|
out:
|
|
enable_rpm_wakeref_asserts(dev_priv);
|
|
if (!dev_priv->uncore.user_forcewake.count)
|
|
intel_runtime_pm_cleanup(dev_priv);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int i915_suspend_switcheroo(struct drm_device *dev, pm_message_t state)
|
|
{
|
|
int error;
|
|
|
|
if (!dev) {
|
|
DRM_ERROR("dev: %p\n", dev);
|
|
DRM_ERROR("DRM not initialized, aborting suspend.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (WARN_ON_ONCE(state.event != PM_EVENT_SUSPEND &&
|
|
state.event != PM_EVENT_FREEZE))
|
|
return -EINVAL;
|
|
|
|
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
|
|
return 0;
|
|
|
|
error = i915_drm_suspend(dev);
|
|
if (error)
|
|
return error;
|
|
|
|
return i915_drm_suspend_late(dev, false);
|
|
}
|
|
|
|
static int i915_drm_resume(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
int ret;
|
|
|
|
disable_rpm_wakeref_asserts(dev_priv);
|
|
intel_sanitize_gt_powersave(dev_priv);
|
|
|
|
i915_gem_sanitize(dev_priv);
|
|
|
|
ret = i915_ggtt_enable_hw(dev_priv);
|
|
if (ret)
|
|
DRM_ERROR("failed to re-enable GGTT\n");
|
|
|
|
intel_csr_ucode_resume(dev_priv);
|
|
|
|
i915_restore_state(dev_priv);
|
|
intel_pps_unlock_regs_wa(dev_priv);
|
|
|
|
intel_init_pch_refclk(dev_priv);
|
|
|
|
/*
|
|
* Interrupts have to be enabled before any batches are run. If not the
|
|
* GPU will hang. i915_gem_init_hw() will initiate batches to
|
|
* update/restore the context.
|
|
*
|
|
* drm_mode_config_reset() needs AUX interrupts.
|
|
*
|
|
* Modeset enabling in intel_modeset_init_hw() also needs working
|
|
* interrupts.
|
|
*/
|
|
intel_runtime_pm_enable_interrupts(dev_priv);
|
|
|
|
drm_mode_config_reset(dev);
|
|
|
|
i915_gem_resume(dev_priv);
|
|
|
|
intel_modeset_init_hw(dev);
|
|
intel_init_clock_gating(dev_priv);
|
|
|
|
spin_lock_irq(&dev_priv->irq_lock);
|
|
if (dev_priv->display.hpd_irq_setup)
|
|
dev_priv->display.hpd_irq_setup(dev_priv);
|
|
spin_unlock_irq(&dev_priv->irq_lock);
|
|
|
|
intel_dp_mst_resume(dev_priv);
|
|
|
|
intel_display_resume(dev);
|
|
|
|
drm_kms_helper_poll_enable(dev);
|
|
|
|
/*
|
|
* ... but also need to make sure that hotplug processing
|
|
* doesn't cause havoc. Like in the driver load code we don't
|
|
* bother with the tiny race here where we might lose hotplug
|
|
* notifications.
|
|
* */
|
|
intel_hpd_init(dev_priv);
|
|
|
|
intel_opregion_resume(dev_priv);
|
|
|
|
intel_fbdev_set_suspend(dev, FBINFO_STATE_RUNNING, false);
|
|
|
|
intel_power_domains_enable(dev_priv);
|
|
|
|
enable_rpm_wakeref_asserts(dev_priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i915_drm_resume_early(struct drm_device *dev)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct pci_dev *pdev = dev_priv->drm.pdev;
|
|
int ret;
|
|
|
|
/*
|
|
* We have a resume ordering issue with the snd-hda driver also
|
|
* requiring our device to be power up. Due to the lack of a
|
|
* parent/child relationship we currently solve this with an early
|
|
* resume hook.
|
|
*
|
|
* FIXME: This should be solved with a special hdmi sink device or
|
|
* similar so that power domains can be employed.
|
|
*/
|
|
|
|
/*
|
|
* Note that we need to set the power state explicitly, since we
|
|
* powered off the device during freeze and the PCI core won't power
|
|
* it back up for us during thaw. Powering off the device during
|
|
* freeze is not a hard requirement though, and during the
|
|
* suspend/resume phases the PCI core makes sure we get here with the
|
|
* device powered on. So in case we change our freeze logic and keep
|
|
* the device powered we can also remove the following set power state
|
|
* call.
|
|
*/
|
|
ret = pci_set_power_state(pdev, PCI_D0);
|
|
if (ret) {
|
|
DRM_ERROR("failed to set PCI D0 power state (%d)\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Note that pci_enable_device() first enables any parent bridge
|
|
* device and only then sets the power state for this device. The
|
|
* bridge enabling is a nop though, since bridge devices are resumed
|
|
* first. The order of enabling power and enabling the device is
|
|
* imposed by the PCI core as described above, so here we preserve the
|
|
* same order for the freeze/thaw phases.
|
|
*
|
|
* TODO: eventually we should remove pci_disable_device() /
|
|
* pci_enable_enable_device() from suspend/resume. Due to how they
|
|
* depend on the device enable refcount we can't anyway depend on them
|
|
* disabling/enabling the device.
|
|
*/
|
|
if (pci_enable_device(pdev))
|
|
return -EIO;
|
|
|
|
pci_set_master(pdev);
|
|
|
|
disable_rpm_wakeref_asserts(dev_priv);
|
|
|
|
if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv))
|
|
ret = vlv_resume_prepare(dev_priv, false);
|
|
if (ret)
|
|
DRM_ERROR("Resume prepare failed: %d, continuing anyway\n",
|
|
ret);
|
|
|
|
intel_uncore_resume_early(dev_priv);
|
|
|
|
if (INTEL_GEN(dev_priv) >= 11 || IS_GEN9_LP(dev_priv)) {
|
|
gen9_sanitize_dc_state(dev_priv);
|
|
bxt_disable_dc9(dev_priv);
|
|
} else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
|
|
hsw_disable_pc8(dev_priv);
|
|
}
|
|
|
|
intel_uncore_sanitize(dev_priv);
|
|
|
|
intel_power_domains_resume(dev_priv);
|
|
|
|
intel_engines_sanitize(dev_priv, true);
|
|
|
|
enable_rpm_wakeref_asserts(dev_priv);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int i915_resume_switcheroo(struct drm_device *dev)
|
|
{
|
|
int ret;
|
|
|
|
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
|
|
return 0;
|
|
|
|
ret = i915_drm_resume_early(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return i915_drm_resume(dev);
|
|
}
|
|
|
|
static int i915_pm_prepare(struct device *kdev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(kdev);
|
|
struct drm_device *dev = pci_get_drvdata(pdev);
|
|
|
|
if (!dev) {
|
|
dev_err(kdev, "DRM not initialized, aborting suspend.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
|
|
return 0;
|
|
|
|
return i915_drm_prepare(dev);
|
|
}
|
|
|
|
static int i915_pm_suspend(struct device *kdev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(kdev);
|
|
struct drm_device *dev = pci_get_drvdata(pdev);
|
|
|
|
if (!dev) {
|
|
dev_err(kdev, "DRM not initialized, aborting suspend.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
|
|
return 0;
|
|
|
|
return i915_drm_suspend(dev);
|
|
}
|
|
|
|
static int i915_pm_suspend_late(struct device *kdev)
|
|
{
|
|
struct drm_device *dev = &kdev_to_i915(kdev)->drm;
|
|
|
|
/*
|
|
* We have a suspend ordering issue with the snd-hda driver also
|
|
* requiring our device to be power up. Due to the lack of a
|
|
* parent/child relationship we currently solve this with an late
|
|
* suspend hook.
|
|
*
|
|
* FIXME: This should be solved with a special hdmi sink device or
|
|
* similar so that power domains can be employed.
|
|
*/
|
|
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
|
|
return 0;
|
|
|
|
return i915_drm_suspend_late(dev, false);
|
|
}
|
|
|
|
static int i915_pm_poweroff_late(struct device *kdev)
|
|
{
|
|
struct drm_device *dev = &kdev_to_i915(kdev)->drm;
|
|
|
|
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
|
|
return 0;
|
|
|
|
return i915_drm_suspend_late(dev, true);
|
|
}
|
|
|
|
static int i915_pm_resume_early(struct device *kdev)
|
|
{
|
|
struct drm_device *dev = &kdev_to_i915(kdev)->drm;
|
|
|
|
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
|
|
return 0;
|
|
|
|
return i915_drm_resume_early(dev);
|
|
}
|
|
|
|
static int i915_pm_resume(struct device *kdev)
|
|
{
|
|
struct drm_device *dev = &kdev_to_i915(kdev)->drm;
|
|
|
|
if (dev->switch_power_state == DRM_SWITCH_POWER_OFF)
|
|
return 0;
|
|
|
|
return i915_drm_resume(dev);
|
|
}
|
|
|
|
/* freeze: before creating the hibernation_image */
|
|
static int i915_pm_freeze(struct device *kdev)
|
|
{
|
|
struct drm_device *dev = &kdev_to_i915(kdev)->drm;
|
|
int ret;
|
|
|
|
if (dev->switch_power_state != DRM_SWITCH_POWER_OFF) {
|
|
ret = i915_drm_suspend(dev);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = i915_gem_freeze(kdev_to_i915(kdev));
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i915_pm_freeze_late(struct device *kdev)
|
|
{
|
|
struct drm_device *dev = &kdev_to_i915(kdev)->drm;
|
|
int ret;
|
|
|
|
if (dev->switch_power_state != DRM_SWITCH_POWER_OFF) {
|
|
ret = i915_drm_suspend_late(dev, true);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
ret = i915_gem_freeze_late(kdev_to_i915(kdev));
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* thaw: called after creating the hibernation image, but before turning off. */
|
|
static int i915_pm_thaw_early(struct device *kdev)
|
|
{
|
|
return i915_pm_resume_early(kdev);
|
|
}
|
|
|
|
static int i915_pm_thaw(struct device *kdev)
|
|
{
|
|
return i915_pm_resume(kdev);
|
|
}
|
|
|
|
/* restore: called after loading the hibernation image. */
|
|
static int i915_pm_restore_early(struct device *kdev)
|
|
{
|
|
return i915_pm_resume_early(kdev);
|
|
}
|
|
|
|
static int i915_pm_restore(struct device *kdev)
|
|
{
|
|
return i915_pm_resume(kdev);
|
|
}
|
|
|
|
/*
|
|
* Save all Gunit registers that may be lost after a D3 and a subsequent
|
|
* S0i[R123] transition. The list of registers needing a save/restore is
|
|
* defined in the VLV2_S0IXRegs document. This documents marks all Gunit
|
|
* registers in the following way:
|
|
* - Driver: saved/restored by the driver
|
|
* - Punit : saved/restored by the Punit firmware
|
|
* - No, w/o marking: no need to save/restore, since the register is R/O or
|
|
* used internally by the HW in a way that doesn't depend
|
|
* keeping the content across a suspend/resume.
|
|
* - Debug : used for debugging
|
|
*
|
|
* We save/restore all registers marked with 'Driver', with the following
|
|
* exceptions:
|
|
* - Registers out of use, including also registers marked with 'Debug'.
|
|
* These have no effect on the driver's operation, so we don't save/restore
|
|
* them to reduce the overhead.
|
|
* - Registers that are fully setup by an initialization function called from
|
|
* the resume path. For example many clock gating and RPS/RC6 registers.
|
|
* - Registers that provide the right functionality with their reset defaults.
|
|
*
|
|
* TODO: Except for registers that based on the above 3 criteria can be safely
|
|
* ignored, we save/restore all others, practically treating the HW context as
|
|
* a black-box for the driver. Further investigation is needed to reduce the
|
|
* saved/restored registers even further, by following the same 3 criteria.
|
|
*/
|
|
static void vlv_save_gunit_s0ix_state(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct vlv_s0ix_state *s = &dev_priv->vlv_s0ix_state;
|
|
int i;
|
|
|
|
/* GAM 0x4000-0x4770 */
|
|
s->wr_watermark = I915_READ(GEN7_WR_WATERMARK);
|
|
s->gfx_prio_ctrl = I915_READ(GEN7_GFX_PRIO_CTRL);
|
|
s->arb_mode = I915_READ(ARB_MODE);
|
|
s->gfx_pend_tlb0 = I915_READ(GEN7_GFX_PEND_TLB0);
|
|
s->gfx_pend_tlb1 = I915_READ(GEN7_GFX_PEND_TLB1);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(s->lra_limits); i++)
|
|
s->lra_limits[i] = I915_READ(GEN7_LRA_LIMITS(i));
|
|
|
|
s->media_max_req_count = I915_READ(GEN7_MEDIA_MAX_REQ_COUNT);
|
|
s->gfx_max_req_count = I915_READ(GEN7_GFX_MAX_REQ_COUNT);
|
|
|
|
s->render_hwsp = I915_READ(RENDER_HWS_PGA_GEN7);
|
|
s->ecochk = I915_READ(GAM_ECOCHK);
|
|
s->bsd_hwsp = I915_READ(BSD_HWS_PGA_GEN7);
|
|
s->blt_hwsp = I915_READ(BLT_HWS_PGA_GEN7);
|
|
|
|
s->tlb_rd_addr = I915_READ(GEN7_TLB_RD_ADDR);
|
|
|
|
/* MBC 0x9024-0x91D0, 0x8500 */
|
|
s->g3dctl = I915_READ(VLV_G3DCTL);
|
|
s->gsckgctl = I915_READ(VLV_GSCKGCTL);
|
|
s->mbctl = I915_READ(GEN6_MBCTL);
|
|
|
|
/* GCP 0x9400-0x9424, 0x8100-0x810C */
|
|
s->ucgctl1 = I915_READ(GEN6_UCGCTL1);
|
|
s->ucgctl3 = I915_READ(GEN6_UCGCTL3);
|
|
s->rcgctl1 = I915_READ(GEN6_RCGCTL1);
|
|
s->rcgctl2 = I915_READ(GEN6_RCGCTL2);
|
|
s->rstctl = I915_READ(GEN6_RSTCTL);
|
|
s->misccpctl = I915_READ(GEN7_MISCCPCTL);
|
|
|
|
/* GPM 0xA000-0xAA84, 0x8000-0x80FC */
|
|
s->gfxpause = I915_READ(GEN6_GFXPAUSE);
|
|
s->rpdeuhwtc = I915_READ(GEN6_RPDEUHWTC);
|
|
s->rpdeuc = I915_READ(GEN6_RPDEUC);
|
|
s->ecobus = I915_READ(ECOBUS);
|
|
s->pwrdwnupctl = I915_READ(VLV_PWRDWNUPCTL);
|
|
s->rp_down_timeout = I915_READ(GEN6_RP_DOWN_TIMEOUT);
|
|
s->rp_deucsw = I915_READ(GEN6_RPDEUCSW);
|
|
s->rcubmabdtmr = I915_READ(GEN6_RCUBMABDTMR);
|
|
s->rcedata = I915_READ(VLV_RCEDATA);
|
|
s->spare2gh = I915_READ(VLV_SPAREG2H);
|
|
|
|
/* Display CZ domain, 0x4400C-0x4402C, 0x4F000-0x4F11F */
|
|
s->gt_imr = I915_READ(GTIMR);
|
|
s->gt_ier = I915_READ(GTIER);
|
|
s->pm_imr = I915_READ(GEN6_PMIMR);
|
|
s->pm_ier = I915_READ(GEN6_PMIER);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(s->gt_scratch); i++)
|
|
s->gt_scratch[i] = I915_READ(GEN7_GT_SCRATCH(i));
|
|
|
|
/* GT SA CZ domain, 0x100000-0x138124 */
|
|
s->tilectl = I915_READ(TILECTL);
|
|
s->gt_fifoctl = I915_READ(GTFIFOCTL);
|
|
s->gtlc_wake_ctrl = I915_READ(VLV_GTLC_WAKE_CTRL);
|
|
s->gtlc_survive = I915_READ(VLV_GTLC_SURVIVABILITY_REG);
|
|
s->pmwgicz = I915_READ(VLV_PMWGICZ);
|
|
|
|
/* Gunit-Display CZ domain, 0x182028-0x1821CF */
|
|
s->gu_ctl0 = I915_READ(VLV_GU_CTL0);
|
|
s->gu_ctl1 = I915_READ(VLV_GU_CTL1);
|
|
s->pcbr = I915_READ(VLV_PCBR);
|
|
s->clock_gate_dis2 = I915_READ(VLV_GUNIT_CLOCK_GATE2);
|
|
|
|
/*
|
|
* Not saving any of:
|
|
* DFT, 0x9800-0x9EC0
|
|
* SARB, 0xB000-0xB1FC
|
|
* GAC, 0x5208-0x524C, 0x14000-0x14C000
|
|
* PCI CFG
|
|
*/
|
|
}
|
|
|
|
static void vlv_restore_gunit_s0ix_state(struct drm_i915_private *dev_priv)
|
|
{
|
|
struct vlv_s0ix_state *s = &dev_priv->vlv_s0ix_state;
|
|
u32 val;
|
|
int i;
|
|
|
|
/* GAM 0x4000-0x4770 */
|
|
I915_WRITE(GEN7_WR_WATERMARK, s->wr_watermark);
|
|
I915_WRITE(GEN7_GFX_PRIO_CTRL, s->gfx_prio_ctrl);
|
|
I915_WRITE(ARB_MODE, s->arb_mode | (0xffff << 16));
|
|
I915_WRITE(GEN7_GFX_PEND_TLB0, s->gfx_pend_tlb0);
|
|
I915_WRITE(GEN7_GFX_PEND_TLB1, s->gfx_pend_tlb1);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(s->lra_limits); i++)
|
|
I915_WRITE(GEN7_LRA_LIMITS(i), s->lra_limits[i]);
|
|
|
|
I915_WRITE(GEN7_MEDIA_MAX_REQ_COUNT, s->media_max_req_count);
|
|
I915_WRITE(GEN7_GFX_MAX_REQ_COUNT, s->gfx_max_req_count);
|
|
|
|
I915_WRITE(RENDER_HWS_PGA_GEN7, s->render_hwsp);
|
|
I915_WRITE(GAM_ECOCHK, s->ecochk);
|
|
I915_WRITE(BSD_HWS_PGA_GEN7, s->bsd_hwsp);
|
|
I915_WRITE(BLT_HWS_PGA_GEN7, s->blt_hwsp);
|
|
|
|
I915_WRITE(GEN7_TLB_RD_ADDR, s->tlb_rd_addr);
|
|
|
|
/* MBC 0x9024-0x91D0, 0x8500 */
|
|
I915_WRITE(VLV_G3DCTL, s->g3dctl);
|
|
I915_WRITE(VLV_GSCKGCTL, s->gsckgctl);
|
|
I915_WRITE(GEN6_MBCTL, s->mbctl);
|
|
|
|
/* GCP 0x9400-0x9424, 0x8100-0x810C */
|
|
I915_WRITE(GEN6_UCGCTL1, s->ucgctl1);
|
|
I915_WRITE(GEN6_UCGCTL3, s->ucgctl3);
|
|
I915_WRITE(GEN6_RCGCTL1, s->rcgctl1);
|
|
I915_WRITE(GEN6_RCGCTL2, s->rcgctl2);
|
|
I915_WRITE(GEN6_RSTCTL, s->rstctl);
|
|
I915_WRITE(GEN7_MISCCPCTL, s->misccpctl);
|
|
|
|
/* GPM 0xA000-0xAA84, 0x8000-0x80FC */
|
|
I915_WRITE(GEN6_GFXPAUSE, s->gfxpause);
|
|
I915_WRITE(GEN6_RPDEUHWTC, s->rpdeuhwtc);
|
|
I915_WRITE(GEN6_RPDEUC, s->rpdeuc);
|
|
I915_WRITE(ECOBUS, s->ecobus);
|
|
I915_WRITE(VLV_PWRDWNUPCTL, s->pwrdwnupctl);
|
|
I915_WRITE(GEN6_RP_DOWN_TIMEOUT,s->rp_down_timeout);
|
|
I915_WRITE(GEN6_RPDEUCSW, s->rp_deucsw);
|
|
I915_WRITE(GEN6_RCUBMABDTMR, s->rcubmabdtmr);
|
|
I915_WRITE(VLV_RCEDATA, s->rcedata);
|
|
I915_WRITE(VLV_SPAREG2H, s->spare2gh);
|
|
|
|
/* Display CZ domain, 0x4400C-0x4402C, 0x4F000-0x4F11F */
|
|
I915_WRITE(GTIMR, s->gt_imr);
|
|
I915_WRITE(GTIER, s->gt_ier);
|
|
I915_WRITE(GEN6_PMIMR, s->pm_imr);
|
|
I915_WRITE(GEN6_PMIER, s->pm_ier);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(s->gt_scratch); i++)
|
|
I915_WRITE(GEN7_GT_SCRATCH(i), s->gt_scratch[i]);
|
|
|
|
/* GT SA CZ domain, 0x100000-0x138124 */
|
|
I915_WRITE(TILECTL, s->tilectl);
|
|
I915_WRITE(GTFIFOCTL, s->gt_fifoctl);
|
|
/*
|
|
* Preserve the GT allow wake and GFX force clock bit, they are not
|
|
* be restored, as they are used to control the s0ix suspend/resume
|
|
* sequence by the caller.
|
|
*/
|
|
val = I915_READ(VLV_GTLC_WAKE_CTRL);
|
|
val &= VLV_GTLC_ALLOWWAKEREQ;
|
|
val |= s->gtlc_wake_ctrl & ~VLV_GTLC_ALLOWWAKEREQ;
|
|
I915_WRITE(VLV_GTLC_WAKE_CTRL, val);
|
|
|
|
val = I915_READ(VLV_GTLC_SURVIVABILITY_REG);
|
|
val &= VLV_GFX_CLK_FORCE_ON_BIT;
|
|
val |= s->gtlc_survive & ~VLV_GFX_CLK_FORCE_ON_BIT;
|
|
I915_WRITE(VLV_GTLC_SURVIVABILITY_REG, val);
|
|
|
|
I915_WRITE(VLV_PMWGICZ, s->pmwgicz);
|
|
|
|
/* Gunit-Display CZ domain, 0x182028-0x1821CF */
|
|
I915_WRITE(VLV_GU_CTL0, s->gu_ctl0);
|
|
I915_WRITE(VLV_GU_CTL1, s->gu_ctl1);
|
|
I915_WRITE(VLV_PCBR, s->pcbr);
|
|
I915_WRITE(VLV_GUNIT_CLOCK_GATE2, s->clock_gate_dis2);
|
|
}
|
|
|
|
static int vlv_wait_for_pw_status(struct drm_i915_private *dev_priv,
|
|
u32 mask, u32 val)
|
|
{
|
|
/* The HW does not like us polling for PW_STATUS frequently, so
|
|
* use the sleeping loop rather than risk the busy spin within
|
|
* intel_wait_for_register().
|
|
*
|
|
* Transitioning between RC6 states should be at most 2ms (see
|
|
* valleyview_enable_rps) so use a 3ms timeout.
|
|
*/
|
|
return wait_for((I915_READ_NOTRACE(VLV_GTLC_PW_STATUS) & mask) == val,
|
|
3);
|
|
}
|
|
|
|
int vlv_force_gfx_clock(struct drm_i915_private *dev_priv, bool force_on)
|
|
{
|
|
u32 val;
|
|
int err;
|
|
|
|
val = I915_READ(VLV_GTLC_SURVIVABILITY_REG);
|
|
val &= ~VLV_GFX_CLK_FORCE_ON_BIT;
|
|
if (force_on)
|
|
val |= VLV_GFX_CLK_FORCE_ON_BIT;
|
|
I915_WRITE(VLV_GTLC_SURVIVABILITY_REG, val);
|
|
|
|
if (!force_on)
|
|
return 0;
|
|
|
|
err = intel_wait_for_register(dev_priv,
|
|
VLV_GTLC_SURVIVABILITY_REG,
|
|
VLV_GFX_CLK_STATUS_BIT,
|
|
VLV_GFX_CLK_STATUS_BIT,
|
|
20);
|
|
if (err)
|
|
DRM_ERROR("timeout waiting for GFX clock force-on (%08x)\n",
|
|
I915_READ(VLV_GTLC_SURVIVABILITY_REG));
|
|
|
|
return err;
|
|
}
|
|
|
|
static int vlv_allow_gt_wake(struct drm_i915_private *dev_priv, bool allow)
|
|
{
|
|
u32 mask;
|
|
u32 val;
|
|
int err;
|
|
|
|
val = I915_READ(VLV_GTLC_WAKE_CTRL);
|
|
val &= ~VLV_GTLC_ALLOWWAKEREQ;
|
|
if (allow)
|
|
val |= VLV_GTLC_ALLOWWAKEREQ;
|
|
I915_WRITE(VLV_GTLC_WAKE_CTRL, val);
|
|
POSTING_READ(VLV_GTLC_WAKE_CTRL);
|
|
|
|
mask = VLV_GTLC_ALLOWWAKEACK;
|
|
val = allow ? mask : 0;
|
|
|
|
err = vlv_wait_for_pw_status(dev_priv, mask, val);
|
|
if (err)
|
|
DRM_ERROR("timeout disabling GT waking\n");
|
|
|
|
return err;
|
|
}
|
|
|
|
static void vlv_wait_for_gt_wells(struct drm_i915_private *dev_priv,
|
|
bool wait_for_on)
|
|
{
|
|
u32 mask;
|
|
u32 val;
|
|
|
|
mask = VLV_GTLC_PW_MEDIA_STATUS_MASK | VLV_GTLC_PW_RENDER_STATUS_MASK;
|
|
val = wait_for_on ? mask : 0;
|
|
|
|
/*
|
|
* RC6 transitioning can be delayed up to 2 msec (see
|
|
* valleyview_enable_rps), use 3 msec for safety.
|
|
*
|
|
* This can fail to turn off the rc6 if the GPU is stuck after a failed
|
|
* reset and we are trying to force the machine to sleep.
|
|
*/
|
|
if (vlv_wait_for_pw_status(dev_priv, mask, val))
|
|
DRM_DEBUG_DRIVER("timeout waiting for GT wells to go %s\n",
|
|
onoff(wait_for_on));
|
|
}
|
|
|
|
static void vlv_check_no_gt_access(struct drm_i915_private *dev_priv)
|
|
{
|
|
if (!(I915_READ(VLV_GTLC_PW_STATUS) & VLV_GTLC_ALLOWWAKEERR))
|
|
return;
|
|
|
|
DRM_DEBUG_DRIVER("GT register access while GT waking disabled\n");
|
|
I915_WRITE(VLV_GTLC_PW_STATUS, VLV_GTLC_ALLOWWAKEERR);
|
|
}
|
|
|
|
static int vlv_suspend_complete(struct drm_i915_private *dev_priv)
|
|
{
|
|
u32 mask;
|
|
int err;
|
|
|
|
/*
|
|
* Bspec defines the following GT well on flags as debug only, so
|
|
* don't treat them as hard failures.
|
|
*/
|
|
vlv_wait_for_gt_wells(dev_priv, false);
|
|
|
|
mask = VLV_GTLC_RENDER_CTX_EXISTS | VLV_GTLC_MEDIA_CTX_EXISTS;
|
|
WARN_ON((I915_READ(VLV_GTLC_WAKE_CTRL) & mask) != mask);
|
|
|
|
vlv_check_no_gt_access(dev_priv);
|
|
|
|
err = vlv_force_gfx_clock(dev_priv, true);
|
|
if (err)
|
|
goto err1;
|
|
|
|
err = vlv_allow_gt_wake(dev_priv, false);
|
|
if (err)
|
|
goto err2;
|
|
|
|
if (!IS_CHERRYVIEW(dev_priv))
|
|
vlv_save_gunit_s0ix_state(dev_priv);
|
|
|
|
err = vlv_force_gfx_clock(dev_priv, false);
|
|
if (err)
|
|
goto err2;
|
|
|
|
return 0;
|
|
|
|
err2:
|
|
/* For safety always re-enable waking and disable gfx clock forcing */
|
|
vlv_allow_gt_wake(dev_priv, true);
|
|
err1:
|
|
vlv_force_gfx_clock(dev_priv, false);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int vlv_resume_prepare(struct drm_i915_private *dev_priv,
|
|
bool rpm_resume)
|
|
{
|
|
int err;
|
|
int ret;
|
|
|
|
/*
|
|
* If any of the steps fail just try to continue, that's the best we
|
|
* can do at this point. Return the first error code (which will also
|
|
* leave RPM permanently disabled).
|
|
*/
|
|
ret = vlv_force_gfx_clock(dev_priv, true);
|
|
|
|
if (!IS_CHERRYVIEW(dev_priv))
|
|
vlv_restore_gunit_s0ix_state(dev_priv);
|
|
|
|
err = vlv_allow_gt_wake(dev_priv, true);
|
|
if (!ret)
|
|
ret = err;
|
|
|
|
err = vlv_force_gfx_clock(dev_priv, false);
|
|
if (!ret)
|
|
ret = err;
|
|
|
|
vlv_check_no_gt_access(dev_priv);
|
|
|
|
if (rpm_resume)
|
|
intel_init_clock_gating(dev_priv);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int intel_runtime_suspend(struct device *kdev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(kdev);
|
|
struct drm_device *dev = pci_get_drvdata(pdev);
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
int ret;
|
|
|
|
if (WARN_ON_ONCE(!(dev_priv->gt_pm.rc6.enabled && HAS_RC6(dev_priv))))
|
|
return -ENODEV;
|
|
|
|
if (WARN_ON_ONCE(!HAS_RUNTIME_PM(dev_priv)))
|
|
return -ENODEV;
|
|
|
|
DRM_DEBUG_KMS("Suspending device\n");
|
|
|
|
disable_rpm_wakeref_asserts(dev_priv);
|
|
|
|
/*
|
|
* We are safe here against re-faults, since the fault handler takes
|
|
* an RPM reference.
|
|
*/
|
|
i915_gem_runtime_suspend(dev_priv);
|
|
|
|
intel_uc_suspend(dev_priv);
|
|
|
|
intel_runtime_pm_disable_interrupts(dev_priv);
|
|
|
|
intel_uncore_suspend(dev_priv);
|
|
|
|
ret = 0;
|
|
if (INTEL_GEN(dev_priv) >= 11) {
|
|
icl_display_core_uninit(dev_priv);
|
|
bxt_enable_dc9(dev_priv);
|
|
} else if (IS_GEN9_LP(dev_priv)) {
|
|
bxt_display_core_uninit(dev_priv);
|
|
bxt_enable_dc9(dev_priv);
|
|
} else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
|
|
hsw_enable_pc8(dev_priv);
|
|
} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
|
|
ret = vlv_suspend_complete(dev_priv);
|
|
}
|
|
|
|
if (ret) {
|
|
DRM_ERROR("Runtime suspend failed, disabling it (%d)\n", ret);
|
|
intel_uncore_runtime_resume(dev_priv);
|
|
|
|
intel_runtime_pm_enable_interrupts(dev_priv);
|
|
|
|
intel_uc_resume(dev_priv);
|
|
|
|
i915_gem_init_swizzling(dev_priv);
|
|
i915_gem_restore_fences(dev_priv);
|
|
|
|
enable_rpm_wakeref_asserts(dev_priv);
|
|
|
|
return ret;
|
|
}
|
|
|
|
enable_rpm_wakeref_asserts(dev_priv);
|
|
intel_runtime_pm_cleanup(dev_priv);
|
|
|
|
if (intel_uncore_arm_unclaimed_mmio_detection(dev_priv))
|
|
DRM_ERROR("Unclaimed access detected prior to suspending\n");
|
|
|
|
dev_priv->runtime_pm.suspended = true;
|
|
|
|
/*
|
|
* FIXME: We really should find a document that references the arguments
|
|
* used below!
|
|
*/
|
|
if (IS_BROADWELL(dev_priv)) {
|
|
/*
|
|
* On Broadwell, if we use PCI_D1 the PCH DDI ports will stop
|
|
* being detected, and the call we do at intel_runtime_resume()
|
|
* won't be able to restore them. Since PCI_D3hot matches the
|
|
* actual specification and appears to be working, use it.
|
|
*/
|
|
intel_opregion_notify_adapter(dev_priv, PCI_D3hot);
|
|
} else {
|
|
/*
|
|
* current versions of firmware which depend on this opregion
|
|
* notification have repurposed the D1 definition to mean
|
|
* "runtime suspended" vs. what you would normally expect (D3)
|
|
* to distinguish it from notifications that might be sent via
|
|
* the suspend path.
|
|
*/
|
|
intel_opregion_notify_adapter(dev_priv, PCI_D1);
|
|
}
|
|
|
|
assert_forcewakes_inactive(dev_priv);
|
|
|
|
if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv))
|
|
intel_hpd_poll_init(dev_priv);
|
|
|
|
DRM_DEBUG_KMS("Device suspended\n");
|
|
return 0;
|
|
}
|
|
|
|
static int intel_runtime_resume(struct device *kdev)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(kdev);
|
|
struct drm_device *dev = pci_get_drvdata(pdev);
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
int ret = 0;
|
|
|
|
if (WARN_ON_ONCE(!HAS_RUNTIME_PM(dev_priv)))
|
|
return -ENODEV;
|
|
|
|
DRM_DEBUG_KMS("Resuming device\n");
|
|
|
|
WARN_ON_ONCE(atomic_read(&dev_priv->runtime_pm.wakeref_count));
|
|
disable_rpm_wakeref_asserts(dev_priv);
|
|
|
|
intel_opregion_notify_adapter(dev_priv, PCI_D0);
|
|
dev_priv->runtime_pm.suspended = false;
|
|
if (intel_uncore_unclaimed_mmio(dev_priv))
|
|
DRM_DEBUG_DRIVER("Unclaimed access during suspend, bios?\n");
|
|
|
|
if (INTEL_GEN(dev_priv) >= 11) {
|
|
bxt_disable_dc9(dev_priv);
|
|
icl_display_core_init(dev_priv, true);
|
|
if (dev_priv->csr.dmc_payload) {
|
|
if (dev_priv->csr.allowed_dc_mask &
|
|
DC_STATE_EN_UPTO_DC6)
|
|
skl_enable_dc6(dev_priv);
|
|
else if (dev_priv->csr.allowed_dc_mask &
|
|
DC_STATE_EN_UPTO_DC5)
|
|
gen9_enable_dc5(dev_priv);
|
|
}
|
|
} else if (IS_GEN9_LP(dev_priv)) {
|
|
bxt_disable_dc9(dev_priv);
|
|
bxt_display_core_init(dev_priv, true);
|
|
if (dev_priv->csr.dmc_payload &&
|
|
(dev_priv->csr.allowed_dc_mask & DC_STATE_EN_UPTO_DC5))
|
|
gen9_enable_dc5(dev_priv);
|
|
} else if (IS_HASWELL(dev_priv) || IS_BROADWELL(dev_priv)) {
|
|
hsw_disable_pc8(dev_priv);
|
|
} else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
|
|
ret = vlv_resume_prepare(dev_priv, true);
|
|
}
|
|
|
|
intel_uncore_runtime_resume(dev_priv);
|
|
|
|
intel_runtime_pm_enable_interrupts(dev_priv);
|
|
|
|
intel_uc_resume(dev_priv);
|
|
|
|
/*
|
|
* No point of rolling back things in case of an error, as the best
|
|
* we can do is to hope that things will still work (and disable RPM).
|
|
*/
|
|
i915_gem_init_swizzling(dev_priv);
|
|
i915_gem_restore_fences(dev_priv);
|
|
|
|
/*
|
|
* On VLV/CHV display interrupts are part of the display
|
|
* power well, so hpd is reinitialized from there. For
|
|
* everyone else do it here.
|
|
*/
|
|
if (!IS_VALLEYVIEW(dev_priv) && !IS_CHERRYVIEW(dev_priv))
|
|
intel_hpd_init(dev_priv);
|
|
|
|
intel_enable_ipc(dev_priv);
|
|
|
|
enable_rpm_wakeref_asserts(dev_priv);
|
|
|
|
if (ret)
|
|
DRM_ERROR("Runtime resume failed, disabling it (%d)\n", ret);
|
|
else
|
|
DRM_DEBUG_KMS("Device resumed\n");
|
|
|
|
return ret;
|
|
}
|
|
|
|
const struct dev_pm_ops i915_pm_ops = {
|
|
/*
|
|
* S0ix (via system suspend) and S3 event handlers [PMSG_SUSPEND,
|
|
* PMSG_RESUME]
|
|
*/
|
|
.prepare = i915_pm_prepare,
|
|
.suspend = i915_pm_suspend,
|
|
.suspend_late = i915_pm_suspend_late,
|
|
.resume_early = i915_pm_resume_early,
|
|
.resume = i915_pm_resume,
|
|
|
|
/*
|
|
* S4 event handlers
|
|
* @freeze, @freeze_late : called (1) before creating the
|
|
* hibernation image [PMSG_FREEZE] and
|
|
* (2) after rebooting, before restoring
|
|
* the image [PMSG_QUIESCE]
|
|
* @thaw, @thaw_early : called (1) after creating the hibernation
|
|
* image, before writing it [PMSG_THAW]
|
|
* and (2) after failing to create or
|
|
* restore the image [PMSG_RECOVER]
|
|
* @poweroff, @poweroff_late: called after writing the hibernation
|
|
* image, before rebooting [PMSG_HIBERNATE]
|
|
* @restore, @restore_early : called after rebooting and restoring the
|
|
* hibernation image [PMSG_RESTORE]
|
|
*/
|
|
.freeze = i915_pm_freeze,
|
|
.freeze_late = i915_pm_freeze_late,
|
|
.thaw_early = i915_pm_thaw_early,
|
|
.thaw = i915_pm_thaw,
|
|
.poweroff = i915_pm_suspend,
|
|
.poweroff_late = i915_pm_poweroff_late,
|
|
.restore_early = i915_pm_restore_early,
|
|
.restore = i915_pm_restore,
|
|
|
|
/* S0ix (via runtime suspend) event handlers */
|
|
.runtime_suspend = intel_runtime_suspend,
|
|
.runtime_resume = intel_runtime_resume,
|
|
};
|
|
|
|
static const struct vm_operations_struct i915_gem_vm_ops = {
|
|
.fault = i915_gem_fault,
|
|
.open = drm_gem_vm_open,
|
|
.close = drm_gem_vm_close,
|
|
};
|
|
|
|
static const struct file_operations i915_driver_fops = {
|
|
.owner = THIS_MODULE,
|
|
.open = drm_open,
|
|
.release = drm_release,
|
|
.unlocked_ioctl = drm_ioctl,
|
|
.mmap = drm_gem_mmap,
|
|
.poll = drm_poll,
|
|
.read = drm_read,
|
|
.compat_ioctl = i915_compat_ioctl,
|
|
.llseek = noop_llseek,
|
|
};
|
|
|
|
static int
|
|
i915_gem_reject_pin_ioctl(struct drm_device *dev, void *data,
|
|
struct drm_file *file)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
|
|
static const struct drm_ioctl_desc i915_ioctls[] = {
|
|
DRM_IOCTL_DEF_DRV(I915_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
|
|
DRM_IOCTL_DEF_DRV(I915_FLUSH, drm_noop, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_FLIP, drm_noop, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_BATCHBUFFER, drm_noop, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_IRQ_EMIT, drm_noop, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_IRQ_WAIT, drm_noop, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_GETPARAM, i915_getparam_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_SETPARAM, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
|
|
DRM_IOCTL_DEF_DRV(I915_ALLOC, drm_noop, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_FREE, drm_noop, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_INIT_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
|
|
DRM_IOCTL_DEF_DRV(I915_CMDBUFFER, drm_noop, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_DESTROY_HEAP, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
|
|
DRM_IOCTL_DEF_DRV(I915_SET_VBLANK_PIPE, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
|
|
DRM_IOCTL_DEF_DRV(I915_GET_VBLANK_PIPE, drm_noop, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_VBLANK_SWAP, drm_noop, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_HWS_ADDR, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_INIT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER, i915_gem_execbuffer_ioctl, DRM_AUTH),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_EXECBUFFER2_WR, i915_gem_execbuffer2_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_PIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_UNPIN, i915_gem_reject_pin_ioctl, DRM_AUTH|DRM_ROOT_ONLY),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_BUSY, i915_gem_busy_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_SET_CACHING, i915_gem_set_caching_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_GET_CACHING, i915_gem_get_caching_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_THROTTLE, i915_gem_throttle_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_ENTERVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_LEAVEVT, drm_noop, DRM_AUTH|DRM_MASTER|DRM_ROOT_ONLY),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_CREATE, i915_gem_create_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_PREAD, i915_gem_pread_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_PWRITE, i915_gem_pwrite_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_MMAP, i915_gem_mmap_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_MMAP_GTT, i915_gem_mmap_gtt_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_SET_DOMAIN, i915_gem_set_domain_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_SW_FINISH, i915_gem_sw_finish_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_SET_TILING, i915_gem_set_tiling_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_GET_TILING, i915_gem_get_tiling_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id_ioctl, 0),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_MADVISE, i915_gem_madvise_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image_ioctl, DRM_MASTER),
|
|
DRM_IOCTL_DEF_DRV(I915_OVERLAY_ATTRS, intel_overlay_attrs_ioctl, DRM_MASTER),
|
|
DRM_IOCTL_DEF_DRV(I915_SET_SPRITE_COLORKEY, intel_sprite_set_colorkey_ioctl, DRM_MASTER),
|
|
DRM_IOCTL_DEF_DRV(I915_GET_SPRITE_COLORKEY, drm_noop, DRM_MASTER),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_WAIT, i915_gem_wait_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_CREATE, i915_gem_context_create_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_DESTROY, i915_gem_context_destroy_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_REG_READ, i915_reg_read_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GET_RESET_STATS, i915_gem_context_reset_stats_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_USERPTR, i915_gem_userptr_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_GETPARAM, i915_gem_context_getparam_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_SETPARAM, i915_gem_context_setparam_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_PERF_OPEN, i915_perf_open_ioctl, DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_PERF_ADD_CONFIG, i915_perf_add_config_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_PERF_REMOVE_CONFIG, i915_perf_remove_config_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
DRM_IOCTL_DEF_DRV(I915_QUERY, i915_query_ioctl, DRM_UNLOCKED|DRM_RENDER_ALLOW),
|
|
};
|
|
|
|
static struct drm_driver driver = {
|
|
/* Don't use MTRRs here; the Xserver or userspace app should
|
|
* deal with them for Intel hardware.
|
|
*/
|
|
.driver_features =
|
|
DRIVER_HAVE_IRQ | DRIVER_IRQ_SHARED | DRIVER_GEM | DRIVER_PRIME |
|
|
DRIVER_RENDER | DRIVER_MODESET | DRIVER_ATOMIC | DRIVER_SYNCOBJ,
|
|
.release = i915_driver_release,
|
|
.open = i915_driver_open,
|
|
.lastclose = i915_driver_lastclose,
|
|
.postclose = i915_driver_postclose,
|
|
|
|
.gem_close_object = i915_gem_close_object,
|
|
.gem_free_object_unlocked = i915_gem_free_object,
|
|
.gem_vm_ops = &i915_gem_vm_ops,
|
|
|
|
.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
|
|
.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
|
|
.gem_prime_export = i915_gem_prime_export,
|
|
.gem_prime_import = i915_gem_prime_import,
|
|
|
|
.dumb_create = i915_gem_dumb_create,
|
|
.dumb_map_offset = i915_gem_mmap_gtt,
|
|
.ioctls = i915_ioctls,
|
|
.num_ioctls = ARRAY_SIZE(i915_ioctls),
|
|
.fops = &i915_driver_fops,
|
|
.name = DRIVER_NAME,
|
|
.desc = DRIVER_DESC,
|
|
.date = DRIVER_DATE,
|
|
.major = DRIVER_MAJOR,
|
|
.minor = DRIVER_MINOR,
|
|
.patchlevel = DRIVER_PATCHLEVEL,
|
|
};
|
|
|
|
#if IS_ENABLED(CONFIG_DRM_I915_SELFTEST)
|
|
#include "selftests/mock_drm.c"
|
|
#endif
|