linux_dsm_epyc7002/drivers/scsi
Linus Torvalds 96d4f267e4 Remove 'type' argument from access_ok() function
Nobody has actually used the type (VERIFY_READ vs VERIFY_WRITE) argument
of the user address range verification function since we got rid of the
old racy i386-only code to walk page tables by hand.

It existed because the original 80386 would not honor the write protect
bit when in kernel mode, so you had to do COW by hand before doing any
user access.  But we haven't supported that in a long time, and these
days the 'type' argument is a purely historical artifact.

A discussion about extending 'user_access_begin()' to do the range
checking resulted this patch, because there is no way we're going to
move the old VERIFY_xyz interface to that model.  And it's best done at
the end of the merge window when I've done most of my merges, so let's
just get this done once and for all.

This patch was mostly done with a sed-script, with manual fix-ups for
the cases that weren't of the trivial 'access_ok(VERIFY_xyz' form.

There were a couple of notable cases:

 - csky still had the old "verify_area()" name as an alias.

 - the iter_iov code had magical hardcoded knowledge of the actual
   values of VERIFY_{READ,WRITE} (not that they mattered, since nothing
   really used it)

 - microblaze used the type argument for a debug printout

but other than those oddities this should be a total no-op patch.

I tried to fix up all architectures, did fairly extensive grepping for
access_ok() uses, and the changes are trivial, but I may have missed
something.  Any missed conversion should be trivially fixable, though.

Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-01-03 18:57:57 -08:00
..
aacraid scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
aic7xxx scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
aic94xx scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
arcmsr scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
arm scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
be2iscsi scsi: introduce a max_segment_size host_template parameters 2018-12-18 23:13:12 -05:00
bfa scsi: bfa: clean up a couple of indentation issues 2018-12-19 21:54:58 -05:00
bnx2fc SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
bnx2i SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
csiostor SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
cxgbi SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
cxlflash SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
device_handler scsi: return blk_status_t from device handler ->prep_fn 2018-11-09 19:17:14 -07:00
dpt sched/wait: Rename wait_queue_t => wait_queue_entry_t 2017-06-20 12:18:27 +02:00
esas2r scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
fcoe scsi: fcoe: remove set but not used variable 'port' 2018-12-20 19:46:20 -05:00
fnic SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
hisi_sas SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
ibmvscsi scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
ibmvscsi_tgt scsi: target: replace fabric_ops.name with fabric_alias 2018-11-28 18:50:59 -05:00
isci scsi: isci: request: mark expected switch fall-through 2018-12-20 20:03:56 -05:00
libfc scsi: libfc: fc_rport: Mark expected switch fall-through 2018-11-28 21:47:30 -05:00
libsas SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
lpfc SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
megaraid scsi: megaraid: fix out-of-bound array accesses 2018-12-20 19:49:23 -05:00
mpt3sas scsi: mpt3sas: mpt3sas_scsih: Mark expected switch fall-through 2018-12-20 19:48:07 -05:00
mvsas scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
osd block: remove __blk_put_request() 2018-11-07 13:42:32 -07:00
pcmcia scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
pm8001 scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
qedf scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
qedi SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
qla2xxx SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
qla4xxx scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
smartpqi SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
snic scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
sym53c8xx_2 scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
ufs SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
.gitignore scsi: scsi_devinfo: Add scsi_devinfo_tbl.c 2017-10-25 05:40:22 -04:00
3w-9xxx.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
3w-9xxx.h scsi: 3w-9xxx: rework lock timeouts 2017-12-04 20:32:53 -05:00
3w-sas.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
3w-sas.h
3w-xxxx.c scsi: 3w-xxxx: fix indentation issue, add missing tab 2018-12-19 21:54:07 -05:00
3w-xxxx.h scsi: 3w-xxx: fully convert to the generic DMA API 2018-10-17 21:58:51 -04:00
53c700_d.h_shipped
53c700.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
53c700.h scsi: 53c700: Fix spelling of 'NEGOTIATION' 2018-08-30 07:27:22 -04:00
53c700.scr
a100u2w.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
a100u2w.h
a2091.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
a2091.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
a3000.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
a3000.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
a4000t.c
advansys.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
aha152x.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
aha152x.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
aha1542.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
aha1542.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
aha1740.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
aha1740.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
am53c974.c scsi: esp_scsi: move dma mapping into the core code 2018-10-15 23:00:38 -04:00
atari_scsi.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
atp870u.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
atp870u.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
BusLogic.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
BusLogic.h
bvme6000_scsi.c
ch.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
constants.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
dc395x.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
dc395x.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
dmx3191d.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
dpt_i2o.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
dpti.h scsi: dpt_i2o: stop using scsi_unregister 2018-03-15 00:25:37 -04:00
esp_scsi.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
esp_scsi.h scsi: esp_scsi: De-duplicate PIO routines 2018-10-17 21:38:20 -04:00
FlashPoint.c scsi: FlashPoint: Remove unnecessary parentheses 2018-09-25 20:45:53 -04:00
g_NCR5380.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
gdth_ioctl.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
gdth_proc.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
gdth_proc.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
gdth.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
gdth.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
gvp11.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
gvp11.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
hosts.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
hpsa_cmd.h scsi: hpsa: update discovery polling 2017-10-25 04:55:18 -04:00
hpsa.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
hpsa.h scsi: hpsa: correct enclosure sas address 2018-07-10 22:25:03 -04:00
hptiop.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
hptiop.h
imm.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
imm.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
initio.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
initio.h
ipr.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
ipr.h scsi: ipr: System hung while dlpar adding primary ipr adapter back 2018-09-21 12:35:39 -04:00
ips.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
ips.h scsi: ips: properly handle 64-bit DMA 2018-11-06 21:31:28 -05:00
iscsi_boot_sysfs.c
iscsi_tcp.c scsi: iscsi: Capture iscsi debug messages using tracepoints 2018-12-20 20:03:55 -05:00
iscsi_tcp.h
jazz_esp.c scsi: esp_scsi: move dma mapping into the core code 2018-10-15 23:00:38 -04:00
Kconfig Linux 4.20-rc3 2018-11-18 15:46:03 -07:00
lasi700.c parisc/scsi/lasi700: Fix section mismatches 2017-08-22 16:34:36 +02:00
libiscsi_tcp.c scsi: iscsi: Capture iscsi debug messages using tracepoints 2018-12-20 20:03:55 -05:00
libiscsi.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
mac53c94.c scsi: mac53c94: remove DISABLE_CLUSTERING 2018-12-18 23:13:12 -05:00
mac53c94.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mac_esp.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
mac_scsi.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
Makefile scsi: myrs: Add Mylex RAID controller (SCSI interface) 2018-10-17 21:07:54 -04:00
megaraid.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
megaraid.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
mesh.c scsi: mesh: remove DISABLE_CLUSTERING 2018-12-18 23:13:12 -05:00
mesh.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mvme16x_scsi.c
mvme147.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
mvme147.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mvumi.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
mvumi.h
myrb.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
myrb.h scsi: myrb: Add Mylex RAID controller (block interface) 2018-10-17 21:06:49 -04:00
myrs.c scsi: myrs: remove the dma_boundary_limit 2018-12-19 21:43:30 -05:00
myrs.h scsi: myrs: Add Mylex RAID controller (SCSI interface) 2018-10-17 21:07:54 -04:00
ncr53c8xx.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
ncr53c8xx.h
NCR5380.c scsi: NCR5380: Return false instead of NULL 2018-11-05 22:47:38 -05:00
NCR5380.h scsi: NCR5380: Have NCR5380_select() return a bool 2018-09-28 02:17:51 -04:00
nsp32_debug.c scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
nsp32_io.h
nsp32.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
nsp32.h
osst_detect.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
osst_options.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
osst.c block: remove __blk_put_request() 2018-11-07 13:42:32 -07:00
osst.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
pmcraid.c Remove 'type' argument from access_ok() function 2019-01-03 18:57:57 -08:00
pmcraid.h scsi: pmcraid: Use sgl_alloc_order() and sgl_free_order() 2018-02-13 21:49:15 -05:00
ppa.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
ppa.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
ps3rom.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
qla1280.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
qla1280.h timer: Remove init_timer_on_stack() in favor of timer_setup_on_stack() 2017-10-05 15:01:17 +02:00
qlogicfas408.c scsi: qlogicfas: move bus_reset to host_reset 2017-08-25 17:21:11 -04:00
qlogicfas408.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
qlogicfas.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
qlogicpti.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
qlogicpti.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
raid_class.c scsi: raid_attrs: fix unused variable warning 2018-08-30 07:21:04 -04:00
script_asm.pl
scsi_common.c scsi: core: doc. fixes to scsi_common.c 2017-12-11 21:39:39 -05:00
scsi_debug.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
scsi_debugfs.c scsi: devinfo: use const_ilog2 for array indices 2018-04-20 19:14:28 -04:00
scsi_debugfs.h
scsi_devinfo.c scsi: devinfo: BLIST_RETRY_ASC_C1 for Fujitsu ETERNUS 2018-04-20 19:14:36 -04:00
scsi_dh.c scsi: scsi_dh: replace too broad "TP9" string with the exact models 2018-04-18 19:34:08 -04:00
scsi_error.c scsi: Do not rely on blk-mq for double completions 2018-11-26 10:34:26 -07:00
scsi_ioctl.c Remove 'type' argument from access_ok() function 2019-01-03 18:57:57 -08:00
scsi_lib_dma.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_lib.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
scsi_logging.c
scsi_logging.h SCSI misc on 20171114 2017-11-14 16:23:44 -08:00
scsi_netlink.c
scsi_pm.c block: Move power management code into a new source file 2018-09-26 15:11:28 -06:00
scsi_priv.h scsi: kill off the legacy IO path 2018-11-07 13:42:32 -07:00
scsi_proc.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_sas_internal.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_scan.c scsi: kill off the legacy IO path 2018-11-07 13:42:32 -07:00
scsi_sysctl.c
scsi_sysfs.c scsi: kill off the legacy IO path 2018-11-07 13:42:32 -07:00
scsi_trace.c
scsi_transport_api.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
scsi_transport_fc.c bsg: convert to use blk-mq 2018-11-07 13:42:32 -07:00
scsi_transport_iscsi.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
scsi_transport_sas.c bsg: provide bsg_remove_queue() helper 2018-11-07 13:42:32 -07:00
scsi_transport_spi.c scsi: core: check for equality of result byte values 2018-06-26 12:27:06 -04:00
scsi_transport_srp.c for-4.18/block-20180603 2018-06-04 07:58:06 -07:00
scsi.c scsi: kill off the legacy IO path 2018-11-07 13:42:32 -07:00
scsi.h scsi: core: remove Scsi_Cmnd typedef 2018-06-19 22:02:25 -04:00
scsicam.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sd_dif.c block: move dif_prepare/dif_complete functions to block layer 2018-07-30 08:27:02 -06:00
sd_zbc.c scsi: return blk_status_t from scsi_init_io and ->init_command 2018-11-09 19:17:14 -07:00
sd.c for-4.21/block-20181221 2018-12-28 13:19:59 -08:00
sd.h scsi: return blk_status_t from scsi_init_io and ->init_command 2018-11-09 19:17:14 -07:00
sense_codes.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
ses.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
sg.c Remove 'type' argument from access_ok() function 2019-01-03 18:57:57 -08:00
sgiwd93.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
sim710.c
sni_53c710.c
sr_ioctl.c block: Switch struct packet_command to use struct scsi_sense_hdr 2018-08-02 15:22:13 -06:00
sr_vendor.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sr.c scsi: return blk_status_t from scsi_init_io and ->init_command 2018-11-09 19:17:14 -07:00
sr.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
st_options.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
st.c block: remove __blk_put_request() 2018-11-07 13:42:32 -07:00
st.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
stex.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
storvsc_drv.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
sun3_scsi_vme.c
sun3_scsi.c scsi: remove the use_clustering flag 2018-12-18 23:19:21 -05:00
sun3x_esp.c scsi: esp_scsi: move dma mapping into the core code 2018-10-15 23:00:38 -04:00
sun_esp.c scsi: sun_esp: Use of_node_name_eq for node name comparisons 2018-12-07 21:56:06 -05:00
virtio_scsi.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
vmw_pvscsi.c SCSI misc on 20181224 2018-12-28 14:48:06 -08:00
vmw_pvscsi.h
wd33c93.c scsi: drop bus reset for wd33c93-compatible boards 2017-08-25 17:21:10 -04:00
wd33c93.h
wd719x.c scsi: flip the default on use_clustering 2018-12-18 23:13:12 -05:00
wd719x.h scsi: wd719x: use per-command private data 2018-11-15 14:27:08 -05:00
xen-scsifront.c scsi: xen-scsifront: remove DISABLE_CLUSTERING 2018-12-18 23:13:12 -05:00
zalon.c parisc/scsi/zalon: Fix section mismatches 2017-08-22 16:34:36 +02:00
zorro7xx.c
zorro_esp.c scsi: esp_scsi: De-duplicate PIO routines 2018-10-17 21:38:20 -04:00