linux_dsm_epyc7002/arch/arm/plat-omap/include/plat/omap-serial.h
Govindraj.R 2fd149645e ARM: OMAP2+: UART: Remove omap_uart_can_sleep and add pm_qos
Omap_uart_can_sleep function blocks system wide low power state until
uart is active remove this func and add qos requests to prevent
MPU from transitioning.

Keep qos request to default value which will allow MPU to transition
and while uart baud rate is available calculate the latency value
from the baudrate and use the same to hold constraint while uart clocks
are enabled, and if uart is auto-idled the constraint is updated with
default constraint value allowing MPU to transition.

Qos requests are blocking notifier calls so put these requests to
work queue, also the driver uses irq_safe version of runtime API's
and callbacks can be called in interrupt disabled context.
So to avoid warn on slow path warning while using qos update
API's from runtime callbacks use the qos_work_queue.

During bootup the runtime_resume call backs might not be called and runtime
callback gets called only after uart is idled by setting the autosuspend
timeout. So qos_request from runtime resume callback might not activated during
boot if uart baudrate is calculated during bootup for console uart, so schedule
the qos_work queue once we calc_latency while configuring the uart port.

Flush and complete any pending qos jobs in work queue while suspending.

Signed-off-by: Govindraj.R <govindraj.raja@ti.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de> (for drivers/tty changes)
Signed-off-by: Kevin Hilman <khilman@ti.com>
2011-12-14 16:05:26 -08:00

142 lines
3.3 KiB
C

/*
* Driver for OMAP-UART controller.
* Based on drivers/serial/8250.c
*
* Copyright (C) 2010 Texas Instruments.
*
* Authors:
* Govindraj R <govindraj.raja@ti.com>
* Thara Gopinath <thara@ti.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef __OMAP_SERIAL_H__
#define __OMAP_SERIAL_H__
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/pm_qos.h>
#include <plat/mux.h>
#define DRIVER_NAME "omap_uart"
/*
* Use tty device name as ttyO, [O -> OMAP]
* in bootargs we specify as console=ttyO0 if uart1
* is used as console uart.
*/
#define OMAP_SERIAL_NAME "ttyO"
#define OMAP_MODE13X_SPEED 230400
#define OMAP_UART_SCR_TX_EMPTY 0x08
/* WER = 0x7F
* Enable module level wakeup in WER reg
*/
#define OMAP_UART_WER_MOD_WKUP 0X7F
/* Enable XON/XOFF flow control on output */
#define OMAP_UART_SW_TX 0x04
/* Enable XON/XOFF flow control on input */
#define OMAP_UART_SW_RX 0x04
#define OMAP_UART_SYSC_RESET 0X07
#define OMAP_UART_TCR_TRIG 0X0F
#define OMAP_UART_SW_CLR 0XF0
#define OMAP_UART_FIFO_CLR 0X06
#define OMAP_UART_DMA_CH_FREE -1
#define OMAP_MAX_HSUART_PORTS 4
#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA
#define UART_ERRATA_i202_MDR1_ACCESS BIT(0)
#define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1)
struct omap_uart_port_info {
bool dma_enabled; /* To specify DMA Mode */
unsigned int uartclk; /* UART clock rate */
upf_t flags; /* UPF_* flags */
u32 errata;
unsigned int dma_rx_buf_size;
unsigned int dma_rx_timeout;
unsigned int autosuspend_timeout;
unsigned int dma_rx_poll_rate;
int (*get_context_loss_count)(struct device *);
void (*set_forceidle)(struct platform_device *);
void (*set_noidle)(struct platform_device *);
void (*enable_wakeup)(struct platform_device *, bool);
};
struct uart_omap_dma {
u8 uart_dma_tx;
u8 uart_dma_rx;
int rx_dma_channel;
int tx_dma_channel;
dma_addr_t rx_buf_dma_phys;
dma_addr_t tx_buf_dma_phys;
unsigned int uart_base;
/*
* Buffer for rx dma.It is not required for tx because the buffer
* comes from port structure.
*/
unsigned char *rx_buf;
unsigned int prev_rx_dma_pos;
int tx_buf_size;
int tx_dma_used;
int rx_dma_used;
spinlock_t tx_lock;
spinlock_t rx_lock;
/* timer to poll activity on rx dma */
struct timer_list rx_timer;
unsigned int rx_buf_size;
unsigned int rx_poll_rate;
unsigned int rx_timeout;
};
struct uart_omap_port {
struct uart_port port;
struct uart_omap_dma uart_dma;
struct platform_device *pdev;
unsigned char ier;
unsigned char lcr;
unsigned char mcr;
unsigned char fcr;
unsigned char efr;
unsigned char dll;
unsigned char dlh;
unsigned char mdr1;
unsigned char scr;
int use_dma;
/*
* Some bits in registers are cleared on a read, so they must
* be saved whenever the register is read but the bits will not
* be immediately processed.
*/
unsigned int lsr_break_flag;
unsigned char msr_saved_flags;
char name[20];
unsigned long port_activity;
u32 context_loss_cnt;
u32 errata;
u8 wakeups_enabled;
struct pm_qos_request pm_qos_request;
u32 latency;
u32 calc_latency;
struct work_struct qos_work;
};
#endif /* __OMAP_SERIAL_H__ */