Ilan Tayari c43051d72a net/mlx5: FPGA, Add SBU bypass and reset flows ... The Innova FPGA includes shell hardware and Sandbox-Unit (SBU) hardware. The shell hardware is handled by mlx5_core itself, while the SBU is handled by a client driver. Reset the SBU to a well-known initial state when initializing a new device, and set the FPGA to bypass mode when uninitializing a device. This allows the client driver to assume that its device has been reset when a new device is detected. During SBU reset, the FPGA is put into SBU-bypass mode. In this mode packets do not pass through the SBU, so it cannot affect the network data stream at all. A factory-image does not have an SBU, so skip these flows. Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>		2017-06-27 16:36:47 +03:00
..
cmd.h
cq.h	IB/mlx5: Support 4k UAR for libmlx5	2017-01-09 20:25:09 +02:00
device.h	net/mlx5: Enhance MCAM reg to allow query on access reg support	2017-06-22 14:30:13 +03:00
doorbell.h	IB/mlx5: Use blue flame register allocator in mlx5_ib	2017-01-09 20:25:08 +02:00
driver.h	net/mlx5: Add support for multiple RoCE enable	2017-06-27 16:36:47 +03:00
fs.h	net/mlx5: Use underlay QPN from the root name space	2017-05-14 13:33:45 +03:00
mlx5_ifc_fpga.h	net/mlx5: FPGA, Add SBU bypass and reset flows	2017-06-27 16:36:47 +03:00
mlx5_ifc.h	net/mlx5: FPGA, Add FW commands for FPGA QPs	2017-06-27 16:36:47 +03:00
port.h	net/mlx5e: Add support for reading connector type from PTYS	2017-06-08 14:12:00 +03:00
qp.h	net/mlx5e: Move and optimize query out of buffer function	2017-06-16 00:19:02 +03:00
srq.h	net/mlx5: Ensure SRQ physical address structure endianness	2016-10-30 15:43:10 +02:00
transobj.h
vport.h	net/mlx5: Push min-inline mode resolution helper into the core	2017-01-24 21:14:05 +02:00