mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-25 02:45:51 +07:00
6be6c04bcc
The tlv targets such as WCN3990 send more data in the chan info event, which is not sent by the non tlv targets. There is a minimum size check in the wmi event for non-tlv targets and hence we cannot update the common channel info structure as it was done in commit13104929d2
("ath10k: fill the channel survey results for WCN3990 correctly"). This broke channel survey results on 10.x firmware versions. If the common channel info structure is updated, the size check for chan info event for non-tlv targets will fail and return -EPROTO and we see the below error messages ath10k_pci 0000:01:00.0: failed to parse chan info event: -71 Add tlv specific channel info structure and restore the original size of the common channel info structure to mitigate this issue. Tested HW: WCN3990 QCA9887 Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1 10.2.4-1.0-00037 Fixes:13104929d2
("ath10k: fill the channel survey results for WCN3990 correctly") Cc: stable@vger.kernel.org # 5.0 Signed-off-by: Rakesh Pillai <pillair@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
7386 lines
211 KiB
C
7386 lines
211 KiB
C
/* SPDX-License-Identifier: ISC */
|
|
/*
|
|
* Copyright (c) 2005-2011 Atheros Communications Inc.
|
|
* Copyright (c) 2011-2017 Qualcomm Atheros, Inc.
|
|
* Copyright (c) 2018-2019, The Linux Foundation. All rights reserved.
|
|
*/
|
|
|
|
#ifndef _WMI_H_
|
|
#define _WMI_H_
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/ieee80211.h>
|
|
|
|
/*
|
|
* This file specifies the WMI interface for the Unified Software
|
|
* Architecture.
|
|
*
|
|
* It includes definitions of all the commands and events. Commands are
|
|
* messages from the host to the target. Events and Replies are messages
|
|
* from the target to the host.
|
|
*
|
|
* Ownership of correctness in regards to WMI commands belongs to the host
|
|
* driver and the target is not required to validate parameters for value,
|
|
* proper range, or any other checking.
|
|
*
|
|
* Guidelines for extending this interface are below.
|
|
*
|
|
* 1. Add new WMI commands ONLY within the specified range - 0x9000 - 0x9fff
|
|
*
|
|
* 2. Use ONLY u32 type for defining member variables within WMI
|
|
* command/event structures. Do not use u8, u16, bool or
|
|
* enum types within these structures.
|
|
*
|
|
* 3. DO NOT define bit fields within structures. Implement bit fields
|
|
* using masks if necessary. Do not use the programming language's bit
|
|
* field definition.
|
|
*
|
|
* 4. Define macros for encode/decode of u8, u16 fields within
|
|
* the u32 variables. Use these macros for set/get of these fields.
|
|
* Try to use this to optimize the structure without bloating it with
|
|
* u32 variables for every lower sized field.
|
|
*
|
|
* 5. Do not use PACK/UNPACK attributes for the structures as each member
|
|
* variable is already 4-byte aligned by virtue of being a u32
|
|
* type.
|
|
*
|
|
* 6. Comment each parameter part of the WMI command/event structure by
|
|
* using the 2 stars at the beginning of C comment instead of one star to
|
|
* enable HTML document generation using Doxygen.
|
|
*
|
|
*/
|
|
|
|
/* Control Path */
|
|
struct wmi_cmd_hdr {
|
|
__le32 cmd_id;
|
|
} __packed;
|
|
|
|
#define WMI_CMD_HDR_CMD_ID_MASK 0x00FFFFFF
|
|
#define WMI_CMD_HDR_CMD_ID_LSB 0
|
|
#define WMI_CMD_HDR_PLT_PRIV_MASK 0xFF000000
|
|
#define WMI_CMD_HDR_PLT_PRIV_LSB 24
|
|
|
|
#define HTC_PROTOCOL_VERSION 0x0002
|
|
#define WMI_PROTOCOL_VERSION 0x0002
|
|
|
|
/*
|
|
* There is no signed version of __le32, so for a temporary solution come
|
|
* up with our own version. The idea is from fs/ntfs/endian.h.
|
|
*
|
|
* Use a_ prefix so that it doesn't conflict if we get proper support to
|
|
* linux/types.h.
|
|
*/
|
|
typedef __s32 __bitwise a_sle32;
|
|
|
|
static inline a_sle32 a_cpu_to_sle32(s32 val)
|
|
{
|
|
return (__force a_sle32)cpu_to_le32(val);
|
|
}
|
|
|
|
static inline s32 a_sle32_to_cpu(a_sle32 val)
|
|
{
|
|
return le32_to_cpu((__force __le32)val);
|
|
}
|
|
|
|
enum wmi_service {
|
|
WMI_SERVICE_BEACON_OFFLOAD = 0,
|
|
WMI_SERVICE_SCAN_OFFLOAD,
|
|
WMI_SERVICE_ROAM_OFFLOAD,
|
|
WMI_SERVICE_BCN_MISS_OFFLOAD,
|
|
WMI_SERVICE_STA_PWRSAVE,
|
|
WMI_SERVICE_STA_ADVANCED_PWRSAVE,
|
|
WMI_SERVICE_AP_UAPSD,
|
|
WMI_SERVICE_AP_DFS,
|
|
WMI_SERVICE_11AC,
|
|
WMI_SERVICE_BLOCKACK,
|
|
WMI_SERVICE_PHYERR,
|
|
WMI_SERVICE_BCN_FILTER,
|
|
WMI_SERVICE_RTT,
|
|
WMI_SERVICE_RATECTRL,
|
|
WMI_SERVICE_WOW,
|
|
WMI_SERVICE_RATECTRL_CACHE,
|
|
WMI_SERVICE_IRAM_TIDS,
|
|
WMI_SERVICE_ARPNS_OFFLOAD,
|
|
WMI_SERVICE_NLO,
|
|
WMI_SERVICE_GTK_OFFLOAD,
|
|
WMI_SERVICE_SCAN_SCH,
|
|
WMI_SERVICE_CSA_OFFLOAD,
|
|
WMI_SERVICE_CHATTER,
|
|
WMI_SERVICE_COEX_FREQAVOID,
|
|
WMI_SERVICE_PACKET_POWER_SAVE,
|
|
WMI_SERVICE_FORCE_FW_HANG,
|
|
WMI_SERVICE_GPIO,
|
|
WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
|
|
WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
|
|
WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
|
|
WMI_SERVICE_STA_KEEP_ALIVE,
|
|
WMI_SERVICE_TX_ENCAP,
|
|
WMI_SERVICE_BURST,
|
|
WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT,
|
|
WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT,
|
|
WMI_SERVICE_ROAM_SCAN_OFFLOAD,
|
|
WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
|
|
WMI_SERVICE_EARLY_RX,
|
|
WMI_SERVICE_STA_SMPS,
|
|
WMI_SERVICE_FWTEST,
|
|
WMI_SERVICE_STA_WMMAC,
|
|
WMI_SERVICE_TDLS,
|
|
WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE,
|
|
WMI_SERVICE_ADAPTIVE_OCS,
|
|
WMI_SERVICE_BA_SSN_SUPPORT,
|
|
WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE,
|
|
WMI_SERVICE_WLAN_HB,
|
|
WMI_SERVICE_LTE_ANT_SHARE_SUPPORT,
|
|
WMI_SERVICE_BATCH_SCAN,
|
|
WMI_SERVICE_QPOWER,
|
|
WMI_SERVICE_PLMREQ,
|
|
WMI_SERVICE_THERMAL_MGMT,
|
|
WMI_SERVICE_RMC,
|
|
WMI_SERVICE_MHF_OFFLOAD,
|
|
WMI_SERVICE_COEX_SAR,
|
|
WMI_SERVICE_BCN_TXRATE_OVERRIDE,
|
|
WMI_SERVICE_NAN,
|
|
WMI_SERVICE_L1SS_STAT,
|
|
WMI_SERVICE_ESTIMATE_LINKSPEED,
|
|
WMI_SERVICE_OBSS_SCAN,
|
|
WMI_SERVICE_TDLS_OFFCHAN,
|
|
WMI_SERVICE_TDLS_UAPSD_BUFFER_STA,
|
|
WMI_SERVICE_TDLS_UAPSD_SLEEP_STA,
|
|
WMI_SERVICE_IBSS_PWRSAVE,
|
|
WMI_SERVICE_LPASS,
|
|
WMI_SERVICE_EXTSCAN,
|
|
WMI_SERVICE_D0WOW,
|
|
WMI_SERVICE_HSOFFLOAD,
|
|
WMI_SERVICE_ROAM_HO_OFFLOAD,
|
|
WMI_SERVICE_RX_FULL_REORDER,
|
|
WMI_SERVICE_DHCP_OFFLOAD,
|
|
WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT,
|
|
WMI_SERVICE_MDNS_OFFLOAD,
|
|
WMI_SERVICE_SAP_AUTH_OFFLOAD,
|
|
WMI_SERVICE_ATF,
|
|
WMI_SERVICE_COEX_GPIO,
|
|
WMI_SERVICE_ENHANCED_PROXY_STA,
|
|
WMI_SERVICE_TT,
|
|
WMI_SERVICE_PEER_CACHING,
|
|
WMI_SERVICE_AUX_SPECTRAL_INTF,
|
|
WMI_SERVICE_AUX_CHAN_LOAD_INTF,
|
|
WMI_SERVICE_BSS_CHANNEL_INFO_64,
|
|
WMI_SERVICE_EXT_RES_CFG_SUPPORT,
|
|
WMI_SERVICE_MESH_11S,
|
|
WMI_SERVICE_MESH_NON_11S,
|
|
WMI_SERVICE_PEER_STATS,
|
|
WMI_SERVICE_RESTRT_CHNL_SUPPORT,
|
|
WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
|
|
WMI_SERVICE_TX_MODE_PUSH_ONLY,
|
|
WMI_SERVICE_TX_MODE_PUSH_PULL,
|
|
WMI_SERVICE_TX_MODE_DYNAMIC,
|
|
WMI_SERVICE_VDEV_RX_FILTER,
|
|
WMI_SERVICE_BTCOEX,
|
|
WMI_SERVICE_CHECK_CAL_VERSION,
|
|
WMI_SERVICE_DBGLOG_WARN2,
|
|
WMI_SERVICE_BTCOEX_DUTY_CYCLE,
|
|
WMI_SERVICE_4_WIRE_COEX_SUPPORT,
|
|
WMI_SERVICE_EXTENDED_NSS_SUPPORT,
|
|
WMI_SERVICE_PROG_GPIO_BAND_SELECT,
|
|
WMI_SERVICE_SMART_LOGGING_SUPPORT,
|
|
WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
|
|
WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
|
|
WMI_SERVICE_MGMT_TX_WMI,
|
|
WMI_SERVICE_TDLS_WIDER_BANDWIDTH,
|
|
WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
|
|
WMI_SERVICE_HOST_DFS_CHECK_SUPPORT,
|
|
WMI_SERVICE_TPC_STATS_FINAL,
|
|
WMI_SERVICE_RESET_CHIP,
|
|
WMI_SERVICE_SPOOF_MAC_SUPPORT,
|
|
WMI_SERVICE_TX_DATA_ACK_RSSI,
|
|
WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
|
|
WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
|
|
WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT,
|
|
WMI_SERVICE_THERM_THROT,
|
|
WMI_SERVICE_RTT_RESPONDER_ROLE,
|
|
WMI_SERVICE_PER_PACKET_SW_ENCRYPT,
|
|
WMI_SERVICE_REPORT_AIRTIME,
|
|
WMI_SERVICE_SYNC_DELETE_CMDS,
|
|
WMI_SERVICE_TX_PWR_PER_PEER,
|
|
|
|
/* Remember to add the new value to wmi_service_name()! */
|
|
|
|
/* keep last */
|
|
WMI_SERVICE_MAX,
|
|
};
|
|
|
|
enum wmi_10x_service {
|
|
WMI_10X_SERVICE_BEACON_OFFLOAD = 0,
|
|
WMI_10X_SERVICE_SCAN_OFFLOAD,
|
|
WMI_10X_SERVICE_ROAM_OFFLOAD,
|
|
WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
|
|
WMI_10X_SERVICE_STA_PWRSAVE,
|
|
WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
|
|
WMI_10X_SERVICE_AP_UAPSD,
|
|
WMI_10X_SERVICE_AP_DFS,
|
|
WMI_10X_SERVICE_11AC,
|
|
WMI_10X_SERVICE_BLOCKACK,
|
|
WMI_10X_SERVICE_PHYERR,
|
|
WMI_10X_SERVICE_BCN_FILTER,
|
|
WMI_10X_SERVICE_RTT,
|
|
WMI_10X_SERVICE_RATECTRL,
|
|
WMI_10X_SERVICE_WOW,
|
|
WMI_10X_SERVICE_RATECTRL_CACHE,
|
|
WMI_10X_SERVICE_IRAM_TIDS,
|
|
WMI_10X_SERVICE_BURST,
|
|
|
|
/* introduced in 10.2 */
|
|
WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
|
|
WMI_10X_SERVICE_FORCE_FW_HANG,
|
|
WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
|
|
WMI_10X_SERVICE_ATF,
|
|
WMI_10X_SERVICE_COEX_GPIO,
|
|
WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
|
|
WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
|
|
WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
|
|
WMI_10X_SERVICE_MESH,
|
|
WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
|
|
WMI_10X_SERVICE_PEER_STATS,
|
|
WMI_10X_SERVICE_RESET_CHIP,
|
|
WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
|
|
WMI_10X_SERVICE_VDEV_BCN_RATE_CONTROL,
|
|
WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
|
|
WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
|
|
};
|
|
|
|
enum wmi_main_service {
|
|
WMI_MAIN_SERVICE_BEACON_OFFLOAD = 0,
|
|
WMI_MAIN_SERVICE_SCAN_OFFLOAD,
|
|
WMI_MAIN_SERVICE_ROAM_OFFLOAD,
|
|
WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
|
|
WMI_MAIN_SERVICE_STA_PWRSAVE,
|
|
WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
|
|
WMI_MAIN_SERVICE_AP_UAPSD,
|
|
WMI_MAIN_SERVICE_AP_DFS,
|
|
WMI_MAIN_SERVICE_11AC,
|
|
WMI_MAIN_SERVICE_BLOCKACK,
|
|
WMI_MAIN_SERVICE_PHYERR,
|
|
WMI_MAIN_SERVICE_BCN_FILTER,
|
|
WMI_MAIN_SERVICE_RTT,
|
|
WMI_MAIN_SERVICE_RATECTRL,
|
|
WMI_MAIN_SERVICE_WOW,
|
|
WMI_MAIN_SERVICE_RATECTRL_CACHE,
|
|
WMI_MAIN_SERVICE_IRAM_TIDS,
|
|
WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
|
|
WMI_MAIN_SERVICE_NLO,
|
|
WMI_MAIN_SERVICE_GTK_OFFLOAD,
|
|
WMI_MAIN_SERVICE_SCAN_SCH,
|
|
WMI_MAIN_SERVICE_CSA_OFFLOAD,
|
|
WMI_MAIN_SERVICE_CHATTER,
|
|
WMI_MAIN_SERVICE_COEX_FREQAVOID,
|
|
WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
|
|
WMI_MAIN_SERVICE_FORCE_FW_HANG,
|
|
WMI_MAIN_SERVICE_GPIO,
|
|
WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
|
|
WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
|
|
WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
|
|
WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
|
|
WMI_MAIN_SERVICE_TX_ENCAP,
|
|
};
|
|
|
|
enum wmi_10_4_service {
|
|
WMI_10_4_SERVICE_BEACON_OFFLOAD = 0,
|
|
WMI_10_4_SERVICE_SCAN_OFFLOAD,
|
|
WMI_10_4_SERVICE_ROAM_OFFLOAD,
|
|
WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
|
|
WMI_10_4_SERVICE_STA_PWRSAVE,
|
|
WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
|
|
WMI_10_4_SERVICE_AP_UAPSD,
|
|
WMI_10_4_SERVICE_AP_DFS,
|
|
WMI_10_4_SERVICE_11AC,
|
|
WMI_10_4_SERVICE_BLOCKACK,
|
|
WMI_10_4_SERVICE_PHYERR,
|
|
WMI_10_4_SERVICE_BCN_FILTER,
|
|
WMI_10_4_SERVICE_RTT,
|
|
WMI_10_4_SERVICE_RATECTRL,
|
|
WMI_10_4_SERVICE_WOW,
|
|
WMI_10_4_SERVICE_RATECTRL_CACHE,
|
|
WMI_10_4_SERVICE_IRAM_TIDS,
|
|
WMI_10_4_SERVICE_BURST,
|
|
WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
|
|
WMI_10_4_SERVICE_GTK_OFFLOAD,
|
|
WMI_10_4_SERVICE_SCAN_SCH,
|
|
WMI_10_4_SERVICE_CSA_OFFLOAD,
|
|
WMI_10_4_SERVICE_CHATTER,
|
|
WMI_10_4_SERVICE_COEX_FREQAVOID,
|
|
WMI_10_4_SERVICE_PACKET_POWER_SAVE,
|
|
WMI_10_4_SERVICE_FORCE_FW_HANG,
|
|
WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
|
|
WMI_10_4_SERVICE_GPIO,
|
|
WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
|
|
WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
|
|
WMI_10_4_SERVICE_STA_KEEP_ALIVE,
|
|
WMI_10_4_SERVICE_TX_ENCAP,
|
|
WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
|
|
WMI_10_4_SERVICE_EARLY_RX,
|
|
WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
|
|
WMI_10_4_SERVICE_TT,
|
|
WMI_10_4_SERVICE_ATF,
|
|
WMI_10_4_SERVICE_PEER_CACHING,
|
|
WMI_10_4_SERVICE_COEX_GPIO,
|
|
WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
|
|
WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
|
|
WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
|
|
WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
|
|
WMI_10_4_SERVICE_MESH_NON_11S,
|
|
WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
|
|
WMI_10_4_SERVICE_PEER_STATS,
|
|
WMI_10_4_SERVICE_MESH_11S,
|
|
WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
|
|
WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
|
|
WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
|
|
WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
|
|
WMI_10_4_SERVICE_VDEV_RX_FILTER,
|
|
WMI_10_4_SERVICE_BTCOEX,
|
|
WMI_10_4_SERVICE_CHECK_CAL_VERSION,
|
|
WMI_10_4_SERVICE_DBGLOG_WARN2,
|
|
WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
|
|
WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
|
|
WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
|
|
WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
|
|
WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
|
|
WMI_10_4_SERVICE_TDLS,
|
|
WMI_10_4_SERVICE_TDLS_OFFCHAN,
|
|
WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
|
|
WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
|
|
WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
|
|
WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
|
|
WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
|
|
WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
|
|
WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
|
|
WMI_10_4_SERVICE_TPC_STATS_FINAL,
|
|
WMI_10_4_SERVICE_CFR_CAPTURE_SUPPORT,
|
|
WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
|
|
WMI_10_4_SERVICE_CFR_CAPTURE_IND_MSG_TYPE_LEGACY,
|
|
WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
|
|
WMI_10_4_SERVICE_PEER_TID_CONFIGS_SUPPORT,
|
|
WMI_10_4_SERVICE_VDEV_BCN_RATE_CONTROL,
|
|
WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
|
|
WMI_10_4_SERVICE_HTT_ASSERT_TRIGGER_SUPPORT,
|
|
WMI_10_4_SERVICE_VDEV_FILTER_NEIGHBOR_RX_PACKETS,
|
|
WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
|
|
WMI_10_4_SERVICE_PEER_CHWIDTH_CHANGE,
|
|
WMI_10_4_SERVICE_RX_FILTER_OUT_COUNT,
|
|
WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
|
|
WMI_10_4_SERVICE_EXT_PEER_TID_CONFIGS_SUPPORT,
|
|
WMI_10_4_SERVICE_REPORT_AIRTIME,
|
|
WMI_10_4_SERVICE_TX_PWR_PER_PEER,
|
|
};
|
|
|
|
static inline char *wmi_service_name(enum wmi_service service_id)
|
|
{
|
|
#define SVCSTR(x) case x: return #x
|
|
|
|
switch (service_id) {
|
|
SVCSTR(WMI_SERVICE_BEACON_OFFLOAD);
|
|
SVCSTR(WMI_SERVICE_SCAN_OFFLOAD);
|
|
SVCSTR(WMI_SERVICE_ROAM_OFFLOAD);
|
|
SVCSTR(WMI_SERVICE_BCN_MISS_OFFLOAD);
|
|
SVCSTR(WMI_SERVICE_STA_PWRSAVE);
|
|
SVCSTR(WMI_SERVICE_STA_ADVANCED_PWRSAVE);
|
|
SVCSTR(WMI_SERVICE_AP_UAPSD);
|
|
SVCSTR(WMI_SERVICE_AP_DFS);
|
|
SVCSTR(WMI_SERVICE_11AC);
|
|
SVCSTR(WMI_SERVICE_BLOCKACK);
|
|
SVCSTR(WMI_SERVICE_PHYERR);
|
|
SVCSTR(WMI_SERVICE_BCN_FILTER);
|
|
SVCSTR(WMI_SERVICE_RTT);
|
|
SVCSTR(WMI_SERVICE_RATECTRL);
|
|
SVCSTR(WMI_SERVICE_WOW);
|
|
SVCSTR(WMI_SERVICE_RATECTRL_CACHE);
|
|
SVCSTR(WMI_SERVICE_IRAM_TIDS);
|
|
SVCSTR(WMI_SERVICE_ARPNS_OFFLOAD);
|
|
SVCSTR(WMI_SERVICE_NLO);
|
|
SVCSTR(WMI_SERVICE_GTK_OFFLOAD);
|
|
SVCSTR(WMI_SERVICE_SCAN_SCH);
|
|
SVCSTR(WMI_SERVICE_CSA_OFFLOAD);
|
|
SVCSTR(WMI_SERVICE_CHATTER);
|
|
SVCSTR(WMI_SERVICE_COEX_FREQAVOID);
|
|
SVCSTR(WMI_SERVICE_PACKET_POWER_SAVE);
|
|
SVCSTR(WMI_SERVICE_FORCE_FW_HANG);
|
|
SVCSTR(WMI_SERVICE_GPIO);
|
|
SVCSTR(WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM);
|
|
SVCSTR(WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG);
|
|
SVCSTR(WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG);
|
|
SVCSTR(WMI_SERVICE_STA_KEEP_ALIVE);
|
|
SVCSTR(WMI_SERVICE_TX_ENCAP);
|
|
SVCSTR(WMI_SERVICE_BURST);
|
|
SVCSTR(WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT);
|
|
SVCSTR(WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT);
|
|
SVCSTR(WMI_SERVICE_ROAM_SCAN_OFFLOAD);
|
|
SVCSTR(WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC);
|
|
SVCSTR(WMI_SERVICE_EARLY_RX);
|
|
SVCSTR(WMI_SERVICE_STA_SMPS);
|
|
SVCSTR(WMI_SERVICE_FWTEST);
|
|
SVCSTR(WMI_SERVICE_STA_WMMAC);
|
|
SVCSTR(WMI_SERVICE_TDLS);
|
|
SVCSTR(WMI_SERVICE_MCC_BCN_INTERVAL_CHANGE);
|
|
SVCSTR(WMI_SERVICE_ADAPTIVE_OCS);
|
|
SVCSTR(WMI_SERVICE_BA_SSN_SUPPORT);
|
|
SVCSTR(WMI_SERVICE_FILTER_IPSEC_NATKEEPALIVE);
|
|
SVCSTR(WMI_SERVICE_WLAN_HB);
|
|
SVCSTR(WMI_SERVICE_LTE_ANT_SHARE_SUPPORT);
|
|
SVCSTR(WMI_SERVICE_BATCH_SCAN);
|
|
SVCSTR(WMI_SERVICE_QPOWER);
|
|
SVCSTR(WMI_SERVICE_PLMREQ);
|
|
SVCSTR(WMI_SERVICE_THERMAL_MGMT);
|
|
SVCSTR(WMI_SERVICE_RMC);
|
|
SVCSTR(WMI_SERVICE_MHF_OFFLOAD);
|
|
SVCSTR(WMI_SERVICE_COEX_SAR);
|
|
SVCSTR(WMI_SERVICE_BCN_TXRATE_OVERRIDE);
|
|
SVCSTR(WMI_SERVICE_NAN);
|
|
SVCSTR(WMI_SERVICE_L1SS_STAT);
|
|
SVCSTR(WMI_SERVICE_ESTIMATE_LINKSPEED);
|
|
SVCSTR(WMI_SERVICE_OBSS_SCAN);
|
|
SVCSTR(WMI_SERVICE_TDLS_OFFCHAN);
|
|
SVCSTR(WMI_SERVICE_TDLS_UAPSD_BUFFER_STA);
|
|
SVCSTR(WMI_SERVICE_TDLS_UAPSD_SLEEP_STA);
|
|
SVCSTR(WMI_SERVICE_IBSS_PWRSAVE);
|
|
SVCSTR(WMI_SERVICE_LPASS);
|
|
SVCSTR(WMI_SERVICE_EXTSCAN);
|
|
SVCSTR(WMI_SERVICE_D0WOW);
|
|
SVCSTR(WMI_SERVICE_HSOFFLOAD);
|
|
SVCSTR(WMI_SERVICE_ROAM_HO_OFFLOAD);
|
|
SVCSTR(WMI_SERVICE_RX_FULL_REORDER);
|
|
SVCSTR(WMI_SERVICE_DHCP_OFFLOAD);
|
|
SVCSTR(WMI_SERVICE_STA_RX_IPA_OFFLOAD_SUPPORT);
|
|
SVCSTR(WMI_SERVICE_MDNS_OFFLOAD);
|
|
SVCSTR(WMI_SERVICE_SAP_AUTH_OFFLOAD);
|
|
SVCSTR(WMI_SERVICE_ATF);
|
|
SVCSTR(WMI_SERVICE_COEX_GPIO);
|
|
SVCSTR(WMI_SERVICE_ENHANCED_PROXY_STA);
|
|
SVCSTR(WMI_SERVICE_TT);
|
|
SVCSTR(WMI_SERVICE_PEER_CACHING);
|
|
SVCSTR(WMI_SERVICE_AUX_SPECTRAL_INTF);
|
|
SVCSTR(WMI_SERVICE_AUX_CHAN_LOAD_INTF);
|
|
SVCSTR(WMI_SERVICE_BSS_CHANNEL_INFO_64);
|
|
SVCSTR(WMI_SERVICE_EXT_RES_CFG_SUPPORT);
|
|
SVCSTR(WMI_SERVICE_MESH_11S);
|
|
SVCSTR(WMI_SERVICE_MESH_NON_11S);
|
|
SVCSTR(WMI_SERVICE_PEER_STATS);
|
|
SVCSTR(WMI_SERVICE_RESTRT_CHNL_SUPPORT);
|
|
SVCSTR(WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT);
|
|
SVCSTR(WMI_SERVICE_TX_MODE_PUSH_ONLY);
|
|
SVCSTR(WMI_SERVICE_TX_MODE_PUSH_PULL);
|
|
SVCSTR(WMI_SERVICE_TX_MODE_DYNAMIC);
|
|
SVCSTR(WMI_SERVICE_VDEV_RX_FILTER);
|
|
SVCSTR(WMI_SERVICE_BTCOEX);
|
|
SVCSTR(WMI_SERVICE_CHECK_CAL_VERSION);
|
|
SVCSTR(WMI_SERVICE_DBGLOG_WARN2);
|
|
SVCSTR(WMI_SERVICE_BTCOEX_DUTY_CYCLE);
|
|
SVCSTR(WMI_SERVICE_4_WIRE_COEX_SUPPORT);
|
|
SVCSTR(WMI_SERVICE_EXTENDED_NSS_SUPPORT);
|
|
SVCSTR(WMI_SERVICE_PROG_GPIO_BAND_SELECT);
|
|
SVCSTR(WMI_SERVICE_SMART_LOGGING_SUPPORT);
|
|
SVCSTR(WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE);
|
|
SVCSTR(WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY);
|
|
SVCSTR(WMI_SERVICE_MGMT_TX_WMI);
|
|
SVCSTR(WMI_SERVICE_TDLS_WIDER_BANDWIDTH);
|
|
SVCSTR(WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS);
|
|
SVCSTR(WMI_SERVICE_HOST_DFS_CHECK_SUPPORT);
|
|
SVCSTR(WMI_SERVICE_TPC_STATS_FINAL);
|
|
SVCSTR(WMI_SERVICE_RESET_CHIP);
|
|
SVCSTR(WMI_SERVICE_SPOOF_MAC_SUPPORT);
|
|
SVCSTR(WMI_SERVICE_TX_DATA_ACK_RSSI);
|
|
SVCSTR(WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT);
|
|
SVCSTR(WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT);
|
|
SVCSTR(WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT);
|
|
SVCSTR(WMI_SERVICE_THERM_THROT);
|
|
SVCSTR(WMI_SERVICE_RTT_RESPONDER_ROLE);
|
|
SVCSTR(WMI_SERVICE_PER_PACKET_SW_ENCRYPT);
|
|
SVCSTR(WMI_SERVICE_REPORT_AIRTIME);
|
|
SVCSTR(WMI_SERVICE_SYNC_DELETE_CMDS);
|
|
SVCSTR(WMI_SERVICE_TX_PWR_PER_PEER);
|
|
|
|
case WMI_SERVICE_MAX:
|
|
return NULL;
|
|
}
|
|
|
|
#undef SVCSTR
|
|
|
|
return NULL;
|
|
}
|
|
|
|
#define WMI_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
|
|
((svc_id) < (len) && \
|
|
__le32_to_cpu((wmi_svc_bmap)[(svc_id) / (sizeof(u32))]) & \
|
|
BIT((svc_id) % (sizeof(u32))))
|
|
|
|
/* This extension is required to accommodate new services, current limit
|
|
* for wmi_services is 64 as target is using only 4-bits of each 32-bit
|
|
* wmi_service word. Extending this to make use of remaining unused bits
|
|
* for new services.
|
|
*/
|
|
#define WMI_EXT_SERVICE_IS_ENABLED(wmi_svc_bmap, svc_id, len) \
|
|
((svc_id) >= (len) && \
|
|
__le32_to_cpu((wmi_svc_bmap)[((svc_id) - (len)) / 28]) & \
|
|
BIT(((((svc_id) - (len)) % 28) & 0x1f) + 4))
|
|
|
|
#define SVCMAP(x, y, len) \
|
|
do { \
|
|
if ((WMI_SERVICE_IS_ENABLED((in), (x), (len))) || \
|
|
(WMI_EXT_SERVICE_IS_ENABLED((in), (x), (len)))) \
|
|
__set_bit(y, out); \
|
|
} while (0)
|
|
|
|
static inline void wmi_10x_svc_map(const __le32 *in, unsigned long *out,
|
|
size_t len)
|
|
{
|
|
SVCMAP(WMI_10X_SERVICE_BEACON_OFFLOAD,
|
|
WMI_SERVICE_BEACON_OFFLOAD, len);
|
|
SVCMAP(WMI_10X_SERVICE_SCAN_OFFLOAD,
|
|
WMI_SERVICE_SCAN_OFFLOAD, len);
|
|
SVCMAP(WMI_10X_SERVICE_ROAM_OFFLOAD,
|
|
WMI_SERVICE_ROAM_OFFLOAD, len);
|
|
SVCMAP(WMI_10X_SERVICE_BCN_MISS_OFFLOAD,
|
|
WMI_SERVICE_BCN_MISS_OFFLOAD, len);
|
|
SVCMAP(WMI_10X_SERVICE_STA_PWRSAVE,
|
|
WMI_SERVICE_STA_PWRSAVE, len);
|
|
SVCMAP(WMI_10X_SERVICE_STA_ADVANCED_PWRSAVE,
|
|
WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
|
|
SVCMAP(WMI_10X_SERVICE_AP_UAPSD,
|
|
WMI_SERVICE_AP_UAPSD, len);
|
|
SVCMAP(WMI_10X_SERVICE_AP_DFS,
|
|
WMI_SERVICE_AP_DFS, len);
|
|
SVCMAP(WMI_10X_SERVICE_11AC,
|
|
WMI_SERVICE_11AC, len);
|
|
SVCMAP(WMI_10X_SERVICE_BLOCKACK,
|
|
WMI_SERVICE_BLOCKACK, len);
|
|
SVCMAP(WMI_10X_SERVICE_PHYERR,
|
|
WMI_SERVICE_PHYERR, len);
|
|
SVCMAP(WMI_10X_SERVICE_BCN_FILTER,
|
|
WMI_SERVICE_BCN_FILTER, len);
|
|
SVCMAP(WMI_10X_SERVICE_RTT,
|
|
WMI_SERVICE_RTT, len);
|
|
SVCMAP(WMI_10X_SERVICE_RATECTRL,
|
|
WMI_SERVICE_RATECTRL, len);
|
|
SVCMAP(WMI_10X_SERVICE_WOW,
|
|
WMI_SERVICE_WOW, len);
|
|
SVCMAP(WMI_10X_SERVICE_RATECTRL_CACHE,
|
|
WMI_SERVICE_RATECTRL_CACHE, len);
|
|
SVCMAP(WMI_10X_SERVICE_IRAM_TIDS,
|
|
WMI_SERVICE_IRAM_TIDS, len);
|
|
SVCMAP(WMI_10X_SERVICE_BURST,
|
|
WMI_SERVICE_BURST, len);
|
|
SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_SW_SUPPORT,
|
|
WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
|
|
SVCMAP(WMI_10X_SERVICE_FORCE_FW_HANG,
|
|
WMI_SERVICE_FORCE_FW_HANG, len);
|
|
SVCMAP(WMI_10X_SERVICE_SMART_ANTENNA_HW_SUPPORT,
|
|
WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
|
|
SVCMAP(WMI_10X_SERVICE_ATF,
|
|
WMI_SERVICE_ATF, len);
|
|
SVCMAP(WMI_10X_SERVICE_COEX_GPIO,
|
|
WMI_SERVICE_COEX_GPIO, len);
|
|
SVCMAP(WMI_10X_SERVICE_AUX_SPECTRAL_INTF,
|
|
WMI_SERVICE_AUX_SPECTRAL_INTF, len);
|
|
SVCMAP(WMI_10X_SERVICE_AUX_CHAN_LOAD_INTF,
|
|
WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
|
|
SVCMAP(WMI_10X_SERVICE_BSS_CHANNEL_INFO_64,
|
|
WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
|
|
SVCMAP(WMI_10X_SERVICE_MESH,
|
|
WMI_SERVICE_MESH_11S, len);
|
|
SVCMAP(WMI_10X_SERVICE_EXT_RES_CFG_SUPPORT,
|
|
WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
|
|
SVCMAP(WMI_10X_SERVICE_PEER_STATS,
|
|
WMI_SERVICE_PEER_STATS, len);
|
|
SVCMAP(WMI_10X_SERVICE_RESET_CHIP,
|
|
WMI_SERVICE_RESET_CHIP, len);
|
|
SVCMAP(WMI_10X_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
|
|
WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
|
|
SVCMAP(WMI_10X_SERVICE_BB_TIMING_CONFIG_SUPPORT,
|
|
WMI_SERVICE_BB_TIMING_CONFIG_SUPPORT, len);
|
|
SVCMAP(WMI_10X_SERVICE_PER_PACKET_SW_ENCRYPT,
|
|
WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
|
|
}
|
|
|
|
static inline void wmi_main_svc_map(const __le32 *in, unsigned long *out,
|
|
size_t len)
|
|
{
|
|
SVCMAP(WMI_MAIN_SERVICE_BEACON_OFFLOAD,
|
|
WMI_SERVICE_BEACON_OFFLOAD, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_SCAN_OFFLOAD,
|
|
WMI_SERVICE_SCAN_OFFLOAD, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_ROAM_OFFLOAD,
|
|
WMI_SERVICE_ROAM_OFFLOAD, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_BCN_MISS_OFFLOAD,
|
|
WMI_SERVICE_BCN_MISS_OFFLOAD, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_STA_PWRSAVE,
|
|
WMI_SERVICE_STA_PWRSAVE, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_STA_ADVANCED_PWRSAVE,
|
|
WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_AP_UAPSD,
|
|
WMI_SERVICE_AP_UAPSD, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_AP_DFS,
|
|
WMI_SERVICE_AP_DFS, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_11AC,
|
|
WMI_SERVICE_11AC, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_BLOCKACK,
|
|
WMI_SERVICE_BLOCKACK, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_PHYERR,
|
|
WMI_SERVICE_PHYERR, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_BCN_FILTER,
|
|
WMI_SERVICE_BCN_FILTER, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_RTT,
|
|
WMI_SERVICE_RTT, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_RATECTRL,
|
|
WMI_SERVICE_RATECTRL, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_WOW,
|
|
WMI_SERVICE_WOW, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_RATECTRL_CACHE,
|
|
WMI_SERVICE_RATECTRL_CACHE, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_IRAM_TIDS,
|
|
WMI_SERVICE_IRAM_TIDS, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_ARPNS_OFFLOAD,
|
|
WMI_SERVICE_ARPNS_OFFLOAD, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_NLO,
|
|
WMI_SERVICE_NLO, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_GTK_OFFLOAD,
|
|
WMI_SERVICE_GTK_OFFLOAD, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_SCAN_SCH,
|
|
WMI_SERVICE_SCAN_SCH, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_CSA_OFFLOAD,
|
|
WMI_SERVICE_CSA_OFFLOAD, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_CHATTER,
|
|
WMI_SERVICE_CHATTER, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_COEX_FREQAVOID,
|
|
WMI_SERVICE_COEX_FREQAVOID, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_PACKET_POWER_SAVE,
|
|
WMI_SERVICE_PACKET_POWER_SAVE, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_FORCE_FW_HANG,
|
|
WMI_SERVICE_FORCE_FW_HANG, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_GPIO,
|
|
WMI_SERVICE_GPIO, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_STA_DTIM_PS_MODULATED_DTIM,
|
|
WMI_SERVICE_STA_DTIM_PS_MODULATED_DTIM, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
|
|
WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
|
|
WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_STA_KEEP_ALIVE,
|
|
WMI_SERVICE_STA_KEEP_ALIVE, len);
|
|
SVCMAP(WMI_MAIN_SERVICE_TX_ENCAP,
|
|
WMI_SERVICE_TX_ENCAP, len);
|
|
}
|
|
|
|
static inline void wmi_10_4_svc_map(const __le32 *in, unsigned long *out,
|
|
size_t len)
|
|
{
|
|
SVCMAP(WMI_10_4_SERVICE_BEACON_OFFLOAD,
|
|
WMI_SERVICE_BEACON_OFFLOAD, len);
|
|
SVCMAP(WMI_10_4_SERVICE_SCAN_OFFLOAD,
|
|
WMI_SERVICE_SCAN_OFFLOAD, len);
|
|
SVCMAP(WMI_10_4_SERVICE_ROAM_OFFLOAD,
|
|
WMI_SERVICE_ROAM_OFFLOAD, len);
|
|
SVCMAP(WMI_10_4_SERVICE_BCN_MISS_OFFLOAD,
|
|
WMI_SERVICE_BCN_MISS_OFFLOAD, len);
|
|
SVCMAP(WMI_10_4_SERVICE_STA_PWRSAVE,
|
|
WMI_SERVICE_STA_PWRSAVE, len);
|
|
SVCMAP(WMI_10_4_SERVICE_STA_ADVANCED_PWRSAVE,
|
|
WMI_SERVICE_STA_ADVANCED_PWRSAVE, len);
|
|
SVCMAP(WMI_10_4_SERVICE_AP_UAPSD,
|
|
WMI_SERVICE_AP_UAPSD, len);
|
|
SVCMAP(WMI_10_4_SERVICE_AP_DFS,
|
|
WMI_SERVICE_AP_DFS, len);
|
|
SVCMAP(WMI_10_4_SERVICE_11AC,
|
|
WMI_SERVICE_11AC, len);
|
|
SVCMAP(WMI_10_4_SERVICE_BLOCKACK,
|
|
WMI_SERVICE_BLOCKACK, len);
|
|
SVCMAP(WMI_10_4_SERVICE_PHYERR,
|
|
WMI_SERVICE_PHYERR, len);
|
|
SVCMAP(WMI_10_4_SERVICE_BCN_FILTER,
|
|
WMI_SERVICE_BCN_FILTER, len);
|
|
SVCMAP(WMI_10_4_SERVICE_RTT,
|
|
WMI_SERVICE_RTT, len);
|
|
SVCMAP(WMI_10_4_SERVICE_RATECTRL,
|
|
WMI_SERVICE_RATECTRL, len);
|
|
SVCMAP(WMI_10_4_SERVICE_WOW,
|
|
WMI_SERVICE_WOW, len);
|
|
SVCMAP(WMI_10_4_SERVICE_RATECTRL_CACHE,
|
|
WMI_SERVICE_RATECTRL_CACHE, len);
|
|
SVCMAP(WMI_10_4_SERVICE_IRAM_TIDS,
|
|
WMI_SERVICE_IRAM_TIDS, len);
|
|
SVCMAP(WMI_10_4_SERVICE_BURST,
|
|
WMI_SERVICE_BURST, len);
|
|
SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_SW_SUPPORT,
|
|
WMI_SERVICE_SMART_ANTENNA_SW_SUPPORT, len);
|
|
SVCMAP(WMI_10_4_SERVICE_GTK_OFFLOAD,
|
|
WMI_SERVICE_GTK_OFFLOAD, len);
|
|
SVCMAP(WMI_10_4_SERVICE_SCAN_SCH,
|
|
WMI_SERVICE_SCAN_SCH, len);
|
|
SVCMAP(WMI_10_4_SERVICE_CSA_OFFLOAD,
|
|
WMI_SERVICE_CSA_OFFLOAD, len);
|
|
SVCMAP(WMI_10_4_SERVICE_CHATTER,
|
|
WMI_SERVICE_CHATTER, len);
|
|
SVCMAP(WMI_10_4_SERVICE_COEX_FREQAVOID,
|
|
WMI_SERVICE_COEX_FREQAVOID, len);
|
|
SVCMAP(WMI_10_4_SERVICE_PACKET_POWER_SAVE,
|
|
WMI_SERVICE_PACKET_POWER_SAVE, len);
|
|
SVCMAP(WMI_10_4_SERVICE_FORCE_FW_HANG,
|
|
WMI_SERVICE_FORCE_FW_HANG, len);
|
|
SVCMAP(WMI_10_4_SERVICE_SMART_ANTENNA_HW_SUPPORT,
|
|
WMI_SERVICE_SMART_ANTENNA_HW_SUPPORT, len);
|
|
SVCMAP(WMI_10_4_SERVICE_GPIO,
|
|
WMI_SERVICE_GPIO, len);
|
|
SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG,
|
|
WMI_SERVICE_STA_UAPSD_BASIC_AUTO_TRIG, len);
|
|
SVCMAP(WMI_10_4_SERVICE_STA_UAPSD_VAR_AUTO_TRIG,
|
|
WMI_SERVICE_STA_UAPSD_VAR_AUTO_TRIG, len);
|
|
SVCMAP(WMI_10_4_SERVICE_STA_KEEP_ALIVE,
|
|
WMI_SERVICE_STA_KEEP_ALIVE, len);
|
|
SVCMAP(WMI_10_4_SERVICE_TX_ENCAP,
|
|
WMI_SERVICE_TX_ENCAP, len);
|
|
SVCMAP(WMI_10_4_SERVICE_AP_PS_DETECT_OUT_OF_SYNC,
|
|
WMI_SERVICE_AP_PS_DETECT_OUT_OF_SYNC, len);
|
|
SVCMAP(WMI_10_4_SERVICE_EARLY_RX,
|
|
WMI_SERVICE_EARLY_RX, len);
|
|
SVCMAP(WMI_10_4_SERVICE_ENHANCED_PROXY_STA,
|
|
WMI_SERVICE_ENHANCED_PROXY_STA, len);
|
|
SVCMAP(WMI_10_4_SERVICE_TT,
|
|
WMI_SERVICE_TT, len);
|
|
SVCMAP(WMI_10_4_SERVICE_ATF,
|
|
WMI_SERVICE_ATF, len);
|
|
SVCMAP(WMI_10_4_SERVICE_PEER_CACHING,
|
|
WMI_SERVICE_PEER_CACHING, len);
|
|
SVCMAP(WMI_10_4_SERVICE_COEX_GPIO,
|
|
WMI_SERVICE_COEX_GPIO, len);
|
|
SVCMAP(WMI_10_4_SERVICE_AUX_SPECTRAL_INTF,
|
|
WMI_SERVICE_AUX_SPECTRAL_INTF, len);
|
|
SVCMAP(WMI_10_4_SERVICE_AUX_CHAN_LOAD_INTF,
|
|
WMI_SERVICE_AUX_CHAN_LOAD_INTF, len);
|
|
SVCMAP(WMI_10_4_SERVICE_BSS_CHANNEL_INFO_64,
|
|
WMI_SERVICE_BSS_CHANNEL_INFO_64, len);
|
|
SVCMAP(WMI_10_4_SERVICE_EXT_RES_CFG_SUPPORT,
|
|
WMI_SERVICE_EXT_RES_CFG_SUPPORT, len);
|
|
SVCMAP(WMI_10_4_SERVICE_MESH_NON_11S,
|
|
WMI_SERVICE_MESH_NON_11S, len);
|
|
SVCMAP(WMI_10_4_SERVICE_RESTRT_CHNL_SUPPORT,
|
|
WMI_SERVICE_RESTRT_CHNL_SUPPORT, len);
|
|
SVCMAP(WMI_10_4_SERVICE_PEER_STATS,
|
|
WMI_SERVICE_PEER_STATS, len);
|
|
SVCMAP(WMI_10_4_SERVICE_MESH_11S,
|
|
WMI_SERVICE_MESH_11S, len);
|
|
SVCMAP(WMI_10_4_SERVICE_PERIODIC_CHAN_STAT_SUPPORT,
|
|
WMI_SERVICE_PERIODIC_CHAN_STAT_SUPPORT, len);
|
|
SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_ONLY,
|
|
WMI_SERVICE_TX_MODE_PUSH_ONLY, len);
|
|
SVCMAP(WMI_10_4_SERVICE_TX_MODE_PUSH_PULL,
|
|
WMI_SERVICE_TX_MODE_PUSH_PULL, len);
|
|
SVCMAP(WMI_10_4_SERVICE_TX_MODE_DYNAMIC,
|
|
WMI_SERVICE_TX_MODE_DYNAMIC, len);
|
|
SVCMAP(WMI_10_4_SERVICE_VDEV_RX_FILTER,
|
|
WMI_SERVICE_VDEV_RX_FILTER, len);
|
|
SVCMAP(WMI_10_4_SERVICE_BTCOEX,
|
|
WMI_SERVICE_BTCOEX, len);
|
|
SVCMAP(WMI_10_4_SERVICE_CHECK_CAL_VERSION,
|
|
WMI_SERVICE_CHECK_CAL_VERSION, len);
|
|
SVCMAP(WMI_10_4_SERVICE_DBGLOG_WARN2,
|
|
WMI_SERVICE_DBGLOG_WARN2, len);
|
|
SVCMAP(WMI_10_4_SERVICE_BTCOEX_DUTY_CYCLE,
|
|
WMI_SERVICE_BTCOEX_DUTY_CYCLE, len);
|
|
SVCMAP(WMI_10_4_SERVICE_4_WIRE_COEX_SUPPORT,
|
|
WMI_SERVICE_4_WIRE_COEX_SUPPORT, len);
|
|
SVCMAP(WMI_10_4_SERVICE_EXTENDED_NSS_SUPPORT,
|
|
WMI_SERVICE_EXTENDED_NSS_SUPPORT, len);
|
|
SVCMAP(WMI_10_4_SERVICE_PROG_GPIO_BAND_SELECT,
|
|
WMI_SERVICE_PROG_GPIO_BAND_SELECT, len);
|
|
SVCMAP(WMI_10_4_SERVICE_SMART_LOGGING_SUPPORT,
|
|
WMI_SERVICE_SMART_LOGGING_SUPPORT, len);
|
|
SVCMAP(WMI_10_4_SERVICE_TDLS,
|
|
WMI_SERVICE_TDLS, len);
|
|
SVCMAP(WMI_10_4_SERVICE_TDLS_OFFCHAN,
|
|
WMI_SERVICE_TDLS_OFFCHAN, len);
|
|
SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_BUFFER_STA,
|
|
WMI_SERVICE_TDLS_UAPSD_BUFFER_STA, len);
|
|
SVCMAP(WMI_10_4_SERVICE_TDLS_UAPSD_SLEEP_STA,
|
|
WMI_SERVICE_TDLS_UAPSD_SLEEP_STA, len);
|
|
SVCMAP(WMI_10_4_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE,
|
|
WMI_SERVICE_TDLS_CONN_TRACKER_IN_HOST_MODE, len);
|
|
SVCMAP(WMI_10_4_SERVICE_TDLS_EXPLICIT_MODE_ONLY,
|
|
WMI_SERVICE_TDLS_EXPLICIT_MODE_ONLY, len);
|
|
SVCMAP(WMI_10_4_SERVICE_TDLS_WIDER_BANDWIDTH,
|
|
WMI_SERVICE_TDLS_WIDER_BANDWIDTH, len);
|
|
SVCMAP(WMI_10_4_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS,
|
|
WMI_SERVICE_HTT_MGMT_TX_COMP_VALID_FLAGS, len);
|
|
SVCMAP(WMI_10_4_SERVICE_HOST_DFS_CHECK_SUPPORT,
|
|
WMI_SERVICE_HOST_DFS_CHECK_SUPPORT, len);
|
|
SVCMAP(WMI_10_4_SERVICE_TPC_STATS_FINAL,
|
|
WMI_SERVICE_TPC_STATS_FINAL, len);
|
|
SVCMAP(WMI_10_4_SERVICE_TX_DATA_ACK_RSSI,
|
|
WMI_SERVICE_TX_DATA_ACK_RSSI, len);
|
|
SVCMAP(WMI_10_4_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT,
|
|
WMI_SERVICE_VDEV_DIFFERENT_BEACON_INTERVAL_SUPPORT, len);
|
|
SVCMAP(WMI_10_4_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT,
|
|
WMI_SERVICE_VDEV_DISABLE_4_ADDR_SRC_LRN_SUPPORT, len);
|
|
SVCMAP(WMI_10_4_SERVICE_RTT_RESPONDER_ROLE,
|
|
WMI_SERVICE_RTT_RESPONDER_ROLE, len);
|
|
SVCMAP(WMI_10_4_SERVICE_PER_PACKET_SW_ENCRYPT,
|
|
WMI_SERVICE_PER_PACKET_SW_ENCRYPT, len);
|
|
SVCMAP(WMI_10_4_SERVICE_REPORT_AIRTIME,
|
|
WMI_SERVICE_REPORT_AIRTIME, len);
|
|
SVCMAP(WMI_10_4_SERVICE_TX_PWR_PER_PEER,
|
|
WMI_SERVICE_TX_PWR_PER_PEER, len);
|
|
}
|
|
|
|
#undef SVCMAP
|
|
|
|
/* 2 word representation of MAC addr */
|
|
struct wmi_mac_addr {
|
|
union {
|
|
u8 addr[6];
|
|
struct {
|
|
u32 word0;
|
|
u32 word1;
|
|
} __packed;
|
|
} __packed;
|
|
} __packed;
|
|
|
|
struct wmi_cmd_map {
|
|
u32 init_cmdid;
|
|
u32 start_scan_cmdid;
|
|
u32 stop_scan_cmdid;
|
|
u32 scan_chan_list_cmdid;
|
|
u32 scan_sch_prio_tbl_cmdid;
|
|
u32 scan_prob_req_oui_cmdid;
|
|
u32 pdev_set_regdomain_cmdid;
|
|
u32 pdev_set_channel_cmdid;
|
|
u32 pdev_set_param_cmdid;
|
|
u32 pdev_pktlog_enable_cmdid;
|
|
u32 pdev_pktlog_disable_cmdid;
|
|
u32 pdev_set_wmm_params_cmdid;
|
|
u32 pdev_set_ht_cap_ie_cmdid;
|
|
u32 pdev_set_vht_cap_ie_cmdid;
|
|
u32 pdev_set_dscp_tid_map_cmdid;
|
|
u32 pdev_set_quiet_mode_cmdid;
|
|
u32 pdev_green_ap_ps_enable_cmdid;
|
|
u32 pdev_get_tpc_config_cmdid;
|
|
u32 pdev_set_base_macaddr_cmdid;
|
|
u32 vdev_create_cmdid;
|
|
u32 vdev_delete_cmdid;
|
|
u32 vdev_start_request_cmdid;
|
|
u32 vdev_restart_request_cmdid;
|
|
u32 vdev_up_cmdid;
|
|
u32 vdev_stop_cmdid;
|
|
u32 vdev_down_cmdid;
|
|
u32 vdev_set_param_cmdid;
|
|
u32 vdev_install_key_cmdid;
|
|
u32 peer_create_cmdid;
|
|
u32 peer_delete_cmdid;
|
|
u32 peer_flush_tids_cmdid;
|
|
u32 peer_set_param_cmdid;
|
|
u32 peer_assoc_cmdid;
|
|
u32 peer_add_wds_entry_cmdid;
|
|
u32 peer_remove_wds_entry_cmdid;
|
|
u32 peer_mcast_group_cmdid;
|
|
u32 bcn_tx_cmdid;
|
|
u32 pdev_send_bcn_cmdid;
|
|
u32 bcn_tmpl_cmdid;
|
|
u32 bcn_filter_rx_cmdid;
|
|
u32 prb_req_filter_rx_cmdid;
|
|
u32 mgmt_tx_cmdid;
|
|
u32 mgmt_tx_send_cmdid;
|
|
u32 prb_tmpl_cmdid;
|
|
u32 addba_clear_resp_cmdid;
|
|
u32 addba_send_cmdid;
|
|
u32 addba_status_cmdid;
|
|
u32 delba_send_cmdid;
|
|
u32 addba_set_resp_cmdid;
|
|
u32 send_singleamsdu_cmdid;
|
|
u32 sta_powersave_mode_cmdid;
|
|
u32 sta_powersave_param_cmdid;
|
|
u32 sta_mimo_ps_mode_cmdid;
|
|
u32 pdev_dfs_enable_cmdid;
|
|
u32 pdev_dfs_disable_cmdid;
|
|
u32 roam_scan_mode;
|
|
u32 roam_scan_rssi_threshold;
|
|
u32 roam_scan_period;
|
|
u32 roam_scan_rssi_change_threshold;
|
|
u32 roam_ap_profile;
|
|
u32 ofl_scan_add_ap_profile;
|
|
u32 ofl_scan_remove_ap_profile;
|
|
u32 ofl_scan_period;
|
|
u32 p2p_dev_set_device_info;
|
|
u32 p2p_dev_set_discoverability;
|
|
u32 p2p_go_set_beacon_ie;
|
|
u32 p2p_go_set_probe_resp_ie;
|
|
u32 p2p_set_vendor_ie_data_cmdid;
|
|
u32 ap_ps_peer_param_cmdid;
|
|
u32 ap_ps_peer_uapsd_coex_cmdid;
|
|
u32 peer_rate_retry_sched_cmdid;
|
|
u32 wlan_profile_trigger_cmdid;
|
|
u32 wlan_profile_set_hist_intvl_cmdid;
|
|
u32 wlan_profile_get_profile_data_cmdid;
|
|
u32 wlan_profile_enable_profile_id_cmdid;
|
|
u32 wlan_profile_list_profile_id_cmdid;
|
|
u32 pdev_suspend_cmdid;
|
|
u32 pdev_resume_cmdid;
|
|
u32 add_bcn_filter_cmdid;
|
|
u32 rmv_bcn_filter_cmdid;
|
|
u32 wow_add_wake_pattern_cmdid;
|
|
u32 wow_del_wake_pattern_cmdid;
|
|
u32 wow_enable_disable_wake_event_cmdid;
|
|
u32 wow_enable_cmdid;
|
|
u32 wow_hostwakeup_from_sleep_cmdid;
|
|
u32 rtt_measreq_cmdid;
|
|
u32 rtt_tsf_cmdid;
|
|
u32 vdev_spectral_scan_configure_cmdid;
|
|
u32 vdev_spectral_scan_enable_cmdid;
|
|
u32 request_stats_cmdid;
|
|
u32 set_arp_ns_offload_cmdid;
|
|
u32 network_list_offload_config_cmdid;
|
|
u32 gtk_offload_cmdid;
|
|
u32 csa_offload_enable_cmdid;
|
|
u32 csa_offload_chanswitch_cmdid;
|
|
u32 chatter_set_mode_cmdid;
|
|
u32 peer_tid_addba_cmdid;
|
|
u32 peer_tid_delba_cmdid;
|
|
u32 sta_dtim_ps_method_cmdid;
|
|
u32 sta_uapsd_auto_trig_cmdid;
|
|
u32 sta_keepalive_cmd;
|
|
u32 echo_cmdid;
|
|
u32 pdev_utf_cmdid;
|
|
u32 dbglog_cfg_cmdid;
|
|
u32 pdev_qvit_cmdid;
|
|
u32 pdev_ftm_intg_cmdid;
|
|
u32 vdev_set_keepalive_cmdid;
|
|
u32 vdev_get_keepalive_cmdid;
|
|
u32 force_fw_hang_cmdid;
|
|
u32 gpio_config_cmdid;
|
|
u32 gpio_output_cmdid;
|
|
u32 pdev_get_temperature_cmdid;
|
|
u32 vdev_set_wmm_params_cmdid;
|
|
u32 tdls_set_state_cmdid;
|
|
u32 tdls_peer_update_cmdid;
|
|
u32 adaptive_qcs_cmdid;
|
|
u32 scan_update_request_cmdid;
|
|
u32 vdev_standby_response_cmdid;
|
|
u32 vdev_resume_response_cmdid;
|
|
u32 wlan_peer_caching_add_peer_cmdid;
|
|
u32 wlan_peer_caching_evict_peer_cmdid;
|
|
u32 wlan_peer_caching_restore_peer_cmdid;
|
|
u32 wlan_peer_caching_print_all_peers_info_cmdid;
|
|
u32 peer_update_wds_entry_cmdid;
|
|
u32 peer_add_proxy_sta_entry_cmdid;
|
|
u32 rtt_keepalive_cmdid;
|
|
u32 oem_req_cmdid;
|
|
u32 nan_cmdid;
|
|
u32 vdev_ratemask_cmdid;
|
|
u32 qboost_cfg_cmdid;
|
|
u32 pdev_smart_ant_enable_cmdid;
|
|
u32 pdev_smart_ant_set_rx_antenna_cmdid;
|
|
u32 peer_smart_ant_set_tx_antenna_cmdid;
|
|
u32 peer_smart_ant_set_train_info_cmdid;
|
|
u32 peer_smart_ant_set_node_config_ops_cmdid;
|
|
u32 pdev_set_antenna_switch_table_cmdid;
|
|
u32 pdev_set_ctl_table_cmdid;
|
|
u32 pdev_set_mimogain_table_cmdid;
|
|
u32 pdev_ratepwr_table_cmdid;
|
|
u32 pdev_ratepwr_chainmsk_table_cmdid;
|
|
u32 pdev_fips_cmdid;
|
|
u32 tt_set_conf_cmdid;
|
|
u32 fwtest_cmdid;
|
|
u32 vdev_atf_request_cmdid;
|
|
u32 peer_atf_request_cmdid;
|
|
u32 pdev_get_ani_cck_config_cmdid;
|
|
u32 pdev_get_ani_ofdm_config_cmdid;
|
|
u32 pdev_reserve_ast_entry_cmdid;
|
|
u32 pdev_get_nfcal_power_cmdid;
|
|
u32 pdev_get_tpc_cmdid;
|
|
u32 pdev_get_ast_info_cmdid;
|
|
u32 vdev_set_dscp_tid_map_cmdid;
|
|
u32 pdev_get_info_cmdid;
|
|
u32 vdev_get_info_cmdid;
|
|
u32 vdev_filter_neighbor_rx_packets_cmdid;
|
|
u32 mu_cal_start_cmdid;
|
|
u32 set_cca_params_cmdid;
|
|
u32 pdev_bss_chan_info_request_cmdid;
|
|
u32 pdev_enable_adaptive_cca_cmdid;
|
|
u32 ext_resource_cfg_cmdid;
|
|
u32 vdev_set_ie_cmdid;
|
|
u32 set_lteu_config_cmdid;
|
|
u32 atf_ssid_grouping_request_cmdid;
|
|
u32 peer_atf_ext_request_cmdid;
|
|
u32 set_periodic_channel_stats_cfg_cmdid;
|
|
u32 peer_bwf_request_cmdid;
|
|
u32 btcoex_cfg_cmdid;
|
|
u32 peer_tx_mu_txmit_count_cmdid;
|
|
u32 peer_tx_mu_txmit_rstcnt_cmdid;
|
|
u32 peer_gid_userpos_list_cmdid;
|
|
u32 pdev_check_cal_version_cmdid;
|
|
u32 coex_version_cfg_cmid;
|
|
u32 pdev_get_rx_filter_cmdid;
|
|
u32 pdev_extended_nss_cfg_cmdid;
|
|
u32 vdev_set_scan_nac_rssi_cmdid;
|
|
u32 prog_gpio_band_select_cmdid;
|
|
u32 config_smart_logging_cmdid;
|
|
u32 debug_fatal_condition_cmdid;
|
|
u32 get_tsf_timer_cmdid;
|
|
u32 pdev_get_tpc_table_cmdid;
|
|
u32 vdev_sifs_trigger_time_cmdid;
|
|
u32 pdev_wds_entry_list_cmdid;
|
|
u32 tdls_set_offchan_mode_cmdid;
|
|
u32 radar_found_cmdid;
|
|
u32 set_bb_timing_cmdid;
|
|
};
|
|
|
|
/*
|
|
* wmi command groups.
|
|
*/
|
|
enum wmi_cmd_group {
|
|
/* 0 to 2 are reserved */
|
|
WMI_GRP_START = 0x3,
|
|
WMI_GRP_SCAN = WMI_GRP_START,
|
|
WMI_GRP_PDEV,
|
|
WMI_GRP_VDEV,
|
|
WMI_GRP_PEER,
|
|
WMI_GRP_MGMT,
|
|
WMI_GRP_BA_NEG,
|
|
WMI_GRP_STA_PS,
|
|
WMI_GRP_DFS,
|
|
WMI_GRP_ROAM,
|
|
WMI_GRP_OFL_SCAN,
|
|
WMI_GRP_P2P,
|
|
WMI_GRP_AP_PS,
|
|
WMI_GRP_RATE_CTRL,
|
|
WMI_GRP_PROFILE,
|
|
WMI_GRP_SUSPEND,
|
|
WMI_GRP_BCN_FILTER,
|
|
WMI_GRP_WOW,
|
|
WMI_GRP_RTT,
|
|
WMI_GRP_SPECTRAL,
|
|
WMI_GRP_STATS,
|
|
WMI_GRP_ARP_NS_OFL,
|
|
WMI_GRP_NLO_OFL,
|
|
WMI_GRP_GTK_OFL,
|
|
WMI_GRP_CSA_OFL,
|
|
WMI_GRP_CHATTER,
|
|
WMI_GRP_TID_ADDBA,
|
|
WMI_GRP_MISC,
|
|
WMI_GRP_GPIO,
|
|
};
|
|
|
|
#define WMI_CMD_GRP(grp_id) (((grp_id) << 12) | 0x1)
|
|
#define WMI_EVT_GRP_START_ID(grp_id) (((grp_id) << 12) | 0x1)
|
|
|
|
#define WMI_CMD_UNSUPPORTED 0
|
|
|
|
/* Command IDs and command events for MAIN FW. */
|
|
enum wmi_cmd_id {
|
|
WMI_INIT_CMDID = 0x1,
|
|
|
|
/* Scan specific commands */
|
|
WMI_START_SCAN_CMDID = WMI_CMD_GRP(WMI_GRP_SCAN),
|
|
WMI_STOP_SCAN_CMDID,
|
|
WMI_SCAN_CHAN_LIST_CMDID,
|
|
WMI_SCAN_SCH_PRIO_TBL_CMDID,
|
|
|
|
/* PDEV (physical device) specific commands */
|
|
WMI_PDEV_SET_REGDOMAIN_CMDID = WMI_CMD_GRP(WMI_GRP_PDEV),
|
|
WMI_PDEV_SET_CHANNEL_CMDID,
|
|
WMI_PDEV_SET_PARAM_CMDID,
|
|
WMI_PDEV_PKTLOG_ENABLE_CMDID,
|
|
WMI_PDEV_PKTLOG_DISABLE_CMDID,
|
|
WMI_PDEV_SET_WMM_PARAMS_CMDID,
|
|
WMI_PDEV_SET_HT_CAP_IE_CMDID,
|
|
WMI_PDEV_SET_VHT_CAP_IE_CMDID,
|
|
WMI_PDEV_SET_DSCP_TID_MAP_CMDID,
|
|
WMI_PDEV_SET_QUIET_MODE_CMDID,
|
|
WMI_PDEV_GREEN_AP_PS_ENABLE_CMDID,
|
|
WMI_PDEV_GET_TPC_CONFIG_CMDID,
|
|
WMI_PDEV_SET_BASE_MACADDR_CMDID,
|
|
|
|
/* VDEV (virtual device) specific commands */
|
|
WMI_VDEV_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_VDEV),
|
|
WMI_VDEV_DELETE_CMDID,
|
|
WMI_VDEV_START_REQUEST_CMDID,
|
|
WMI_VDEV_RESTART_REQUEST_CMDID,
|
|
WMI_VDEV_UP_CMDID,
|
|
WMI_VDEV_STOP_CMDID,
|
|
WMI_VDEV_DOWN_CMDID,
|
|
WMI_VDEV_SET_PARAM_CMDID,
|
|
WMI_VDEV_INSTALL_KEY_CMDID,
|
|
|
|
/* peer specific commands */
|
|
WMI_PEER_CREATE_CMDID = WMI_CMD_GRP(WMI_GRP_PEER),
|
|
WMI_PEER_DELETE_CMDID,
|
|
WMI_PEER_FLUSH_TIDS_CMDID,
|
|
WMI_PEER_SET_PARAM_CMDID,
|
|
WMI_PEER_ASSOC_CMDID,
|
|
WMI_PEER_ADD_WDS_ENTRY_CMDID,
|
|
WMI_PEER_REMOVE_WDS_ENTRY_CMDID,
|
|
WMI_PEER_MCAST_GROUP_CMDID,
|
|
|
|
/* beacon/management specific commands */
|
|
WMI_BCN_TX_CMDID = WMI_CMD_GRP(WMI_GRP_MGMT),
|
|
WMI_PDEV_SEND_BCN_CMDID,
|
|
WMI_BCN_TMPL_CMDID,
|
|
WMI_BCN_FILTER_RX_CMDID,
|
|
WMI_PRB_REQ_FILTER_RX_CMDID,
|
|
WMI_MGMT_TX_CMDID,
|
|
WMI_PRB_TMPL_CMDID,
|
|
|
|
/* commands to directly control BA negotiation directly from host. */
|
|
WMI_ADDBA_CLEAR_RESP_CMDID = WMI_CMD_GRP(WMI_GRP_BA_NEG),
|
|
WMI_ADDBA_SEND_CMDID,
|
|
WMI_ADDBA_STATUS_CMDID,
|
|
WMI_DELBA_SEND_CMDID,
|
|
WMI_ADDBA_SET_RESP_CMDID,
|
|
WMI_SEND_SINGLEAMSDU_CMDID,
|
|
|
|
/* Station power save specific config */
|
|
WMI_STA_POWERSAVE_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_STA_PS),
|
|
WMI_STA_POWERSAVE_PARAM_CMDID,
|
|
WMI_STA_MIMO_PS_MODE_CMDID,
|
|
|
|
/** DFS-specific commands */
|
|
WMI_PDEV_DFS_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_DFS),
|
|
WMI_PDEV_DFS_DISABLE_CMDID,
|
|
|
|
/* Roaming specific commands */
|
|
WMI_ROAM_SCAN_MODE = WMI_CMD_GRP(WMI_GRP_ROAM),
|
|
WMI_ROAM_SCAN_RSSI_THRESHOLD,
|
|
WMI_ROAM_SCAN_PERIOD,
|
|
WMI_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
|
|
WMI_ROAM_AP_PROFILE,
|
|
|
|
/* offload scan specific commands */
|
|
WMI_OFL_SCAN_ADD_AP_PROFILE = WMI_CMD_GRP(WMI_GRP_OFL_SCAN),
|
|
WMI_OFL_SCAN_REMOVE_AP_PROFILE,
|
|
WMI_OFL_SCAN_PERIOD,
|
|
|
|
/* P2P specific commands */
|
|
WMI_P2P_DEV_SET_DEVICE_INFO = WMI_CMD_GRP(WMI_GRP_P2P),
|
|
WMI_P2P_DEV_SET_DISCOVERABILITY,
|
|
WMI_P2P_GO_SET_BEACON_IE,
|
|
WMI_P2P_GO_SET_PROBE_RESP_IE,
|
|
WMI_P2P_SET_VENDOR_IE_DATA_CMDID,
|
|
|
|
/* AP power save specific config */
|
|
WMI_AP_PS_PEER_PARAM_CMDID = WMI_CMD_GRP(WMI_GRP_AP_PS),
|
|
WMI_AP_PS_PEER_UAPSD_COEX_CMDID,
|
|
|
|
/* Rate-control specific commands */
|
|
WMI_PEER_RATE_RETRY_SCHED_CMDID =
|
|
WMI_CMD_GRP(WMI_GRP_RATE_CTRL),
|
|
|
|
/* WLAN Profiling commands. */
|
|
WMI_WLAN_PROFILE_TRIGGER_CMDID = WMI_CMD_GRP(WMI_GRP_PROFILE),
|
|
WMI_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
|
|
WMI_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
|
|
WMI_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
|
|
WMI_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
|
|
|
|
/* Suspend resume command Ids */
|
|
WMI_PDEV_SUSPEND_CMDID = WMI_CMD_GRP(WMI_GRP_SUSPEND),
|
|
WMI_PDEV_RESUME_CMDID,
|
|
|
|
/* Beacon filter commands */
|
|
WMI_ADD_BCN_FILTER_CMDID = WMI_CMD_GRP(WMI_GRP_BCN_FILTER),
|
|
WMI_RMV_BCN_FILTER_CMDID,
|
|
|
|
/* WOW Specific WMI commands*/
|
|
WMI_WOW_ADD_WAKE_PATTERN_CMDID = WMI_CMD_GRP(WMI_GRP_WOW),
|
|
WMI_WOW_DEL_WAKE_PATTERN_CMDID,
|
|
WMI_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
|
|
WMI_WOW_ENABLE_CMDID,
|
|
WMI_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
|
|
|
|
/* RTT measurement related cmd */
|
|
WMI_RTT_MEASREQ_CMDID = WMI_CMD_GRP(WMI_GRP_RTT),
|
|
WMI_RTT_TSF_CMDID,
|
|
|
|
/* spectral scan commands */
|
|
WMI_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID = WMI_CMD_GRP(WMI_GRP_SPECTRAL),
|
|
WMI_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
|
|
|
|
/* F/W stats */
|
|
WMI_REQUEST_STATS_CMDID = WMI_CMD_GRP(WMI_GRP_STATS),
|
|
|
|
/* ARP OFFLOAD REQUEST*/
|
|
WMI_SET_ARP_NS_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_ARP_NS_OFL),
|
|
|
|
/* NS offload confid*/
|
|
WMI_NETWORK_LIST_OFFLOAD_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_NLO_OFL),
|
|
|
|
/* GTK offload Specific WMI commands*/
|
|
WMI_GTK_OFFLOAD_CMDID = WMI_CMD_GRP(WMI_GRP_GTK_OFL),
|
|
|
|
/* CSA offload Specific WMI commands*/
|
|
WMI_CSA_OFFLOAD_ENABLE_CMDID = WMI_CMD_GRP(WMI_GRP_CSA_OFL),
|
|
WMI_CSA_OFFLOAD_CHANSWITCH_CMDID,
|
|
|
|
/* Chatter commands*/
|
|
WMI_CHATTER_SET_MODE_CMDID = WMI_CMD_GRP(WMI_GRP_CHATTER),
|
|
|
|
/* addba specific commands */
|
|
WMI_PEER_TID_ADDBA_CMDID = WMI_CMD_GRP(WMI_GRP_TID_ADDBA),
|
|
WMI_PEER_TID_DELBA_CMDID,
|
|
|
|
/* set station mimo powersave method */
|
|
WMI_STA_DTIM_PS_METHOD_CMDID,
|
|
/* Configure the Station UAPSD AC Auto Trigger Parameters */
|
|
WMI_STA_UAPSD_AUTO_TRIG_CMDID,
|
|
|
|
/* STA Keep alive parameter configuration,
|
|
* Requires WMI_SERVICE_STA_KEEP_ALIVE
|
|
*/
|
|
WMI_STA_KEEPALIVE_CMD,
|
|
|
|
/* misc command group */
|
|
WMI_ECHO_CMDID = WMI_CMD_GRP(WMI_GRP_MISC),
|
|
WMI_PDEV_UTF_CMDID,
|
|
WMI_DBGLOG_CFG_CMDID,
|
|
WMI_PDEV_QVIT_CMDID,
|
|
WMI_PDEV_FTM_INTG_CMDID,
|
|
WMI_VDEV_SET_KEEPALIVE_CMDID,
|
|
WMI_VDEV_GET_KEEPALIVE_CMDID,
|
|
WMI_FORCE_FW_HANG_CMDID,
|
|
|
|
/* GPIO Configuration */
|
|
WMI_GPIO_CONFIG_CMDID = WMI_CMD_GRP(WMI_GRP_GPIO),
|
|
WMI_GPIO_OUTPUT_CMDID,
|
|
};
|
|
|
|
enum wmi_event_id {
|
|
WMI_SERVICE_READY_EVENTID = 0x1,
|
|
WMI_READY_EVENTID,
|
|
WMI_SERVICE_AVAILABLE_EVENTID,
|
|
|
|
/* Scan specific events */
|
|
WMI_SCAN_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_SCAN),
|
|
|
|
/* PDEV specific events */
|
|
WMI_PDEV_TPC_CONFIG_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PDEV),
|
|
WMI_CHAN_INFO_EVENTID,
|
|
WMI_PHYERR_EVENTID,
|
|
|
|
/* VDEV specific events */
|
|
WMI_VDEV_START_RESP_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_VDEV),
|
|
WMI_VDEV_STOPPED_EVENTID,
|
|
WMI_VDEV_INSTALL_KEY_COMPLETE_EVENTID,
|
|
|
|
/* peer specific events */
|
|
WMI_PEER_STA_KICKOUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_PEER),
|
|
|
|
/* beacon/mgmt specific events */
|
|
WMI_MGMT_RX_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MGMT),
|
|
WMI_HOST_SWBA_EVENTID,
|
|
WMI_TBTTOFFSET_UPDATE_EVENTID,
|
|
|
|
/* ADDBA Related WMI Events*/
|
|
WMI_TX_DELBA_COMPLETE_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_BA_NEG),
|
|
WMI_TX_ADDBA_COMPLETE_EVENTID,
|
|
|
|
/* Roam event to trigger roaming on host */
|
|
WMI_ROAM_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_ROAM),
|
|
WMI_PROFILE_MATCH,
|
|
|
|
/* WoW */
|
|
WMI_WOW_WAKEUP_HOST_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_WOW),
|
|
|
|
/* RTT */
|
|
WMI_RTT_MEASUREMENT_REPORT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_RTT),
|
|
WMI_TSF_MEASUREMENT_REPORT_EVENTID,
|
|
WMI_RTT_ERROR_REPORT_EVENTID,
|
|
|
|
/* GTK offload */
|
|
WMI_GTK_OFFLOAD_STATUS_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GTK_OFL),
|
|
WMI_GTK_REKEY_FAIL_EVENTID,
|
|
|
|
/* CSA IE received event */
|
|
WMI_CSA_HANDLING_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_CSA_OFL),
|
|
|
|
/* Misc events */
|
|
WMI_ECHO_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_MISC),
|
|
WMI_PDEV_UTF_EVENTID,
|
|
WMI_DEBUG_MESG_EVENTID,
|
|
WMI_UPDATE_STATS_EVENTID,
|
|
WMI_DEBUG_PRINT_EVENTID,
|
|
WMI_DCS_INTERFERENCE_EVENTID,
|
|
WMI_PDEV_QVIT_EVENTID,
|
|
WMI_WLAN_PROFILE_DATA_EVENTID,
|
|
WMI_PDEV_FTM_INTG_EVENTID,
|
|
WMI_WLAN_FREQ_AVOID_EVENTID,
|
|
WMI_VDEV_GET_KEEPALIVE_EVENTID,
|
|
|
|
/* GPIO Event */
|
|
WMI_GPIO_INPUT_EVENTID = WMI_EVT_GRP_START_ID(WMI_GRP_GPIO),
|
|
};
|
|
|
|
/* Command IDs and command events for 10.X firmware */
|
|
enum wmi_10x_cmd_id {
|
|
WMI_10X_START_CMDID = 0x9000,
|
|
WMI_10X_END_CMDID = 0x9FFF,
|
|
|
|
/* initialize the wlan sub system */
|
|
WMI_10X_INIT_CMDID,
|
|
|
|
/* Scan specific commands */
|
|
|
|
WMI_10X_START_SCAN_CMDID = WMI_10X_START_CMDID,
|
|
WMI_10X_STOP_SCAN_CMDID,
|
|
WMI_10X_SCAN_CHAN_LIST_CMDID,
|
|
WMI_10X_ECHO_CMDID,
|
|
|
|
/* PDEV(physical device) specific commands */
|
|
WMI_10X_PDEV_SET_REGDOMAIN_CMDID,
|
|
WMI_10X_PDEV_SET_CHANNEL_CMDID,
|
|
WMI_10X_PDEV_SET_PARAM_CMDID,
|
|
WMI_10X_PDEV_PKTLOG_ENABLE_CMDID,
|
|
WMI_10X_PDEV_PKTLOG_DISABLE_CMDID,
|
|
WMI_10X_PDEV_SET_WMM_PARAMS_CMDID,
|
|
WMI_10X_PDEV_SET_HT_CAP_IE_CMDID,
|
|
WMI_10X_PDEV_SET_VHT_CAP_IE_CMDID,
|
|
WMI_10X_PDEV_SET_BASE_MACADDR_CMDID,
|
|
WMI_10X_PDEV_SET_DSCP_TID_MAP_CMDID,
|
|
WMI_10X_PDEV_SET_QUIET_MODE_CMDID,
|
|
WMI_10X_PDEV_GREEN_AP_PS_ENABLE_CMDID,
|
|
WMI_10X_PDEV_GET_TPC_CONFIG_CMDID,
|
|
|
|
/* VDEV(virtual device) specific commands */
|
|
WMI_10X_VDEV_CREATE_CMDID,
|
|
WMI_10X_VDEV_DELETE_CMDID,
|
|
WMI_10X_VDEV_START_REQUEST_CMDID,
|
|
WMI_10X_VDEV_RESTART_REQUEST_CMDID,
|
|
WMI_10X_VDEV_UP_CMDID,
|
|
WMI_10X_VDEV_STOP_CMDID,
|
|
WMI_10X_VDEV_DOWN_CMDID,
|
|
WMI_10X_VDEV_STANDBY_RESPONSE_CMDID,
|
|
WMI_10X_VDEV_RESUME_RESPONSE_CMDID,
|
|
WMI_10X_VDEV_SET_PARAM_CMDID,
|
|
WMI_10X_VDEV_INSTALL_KEY_CMDID,
|
|
|
|
/* peer specific commands */
|
|
WMI_10X_PEER_CREATE_CMDID,
|
|
WMI_10X_PEER_DELETE_CMDID,
|
|
WMI_10X_PEER_FLUSH_TIDS_CMDID,
|
|
WMI_10X_PEER_SET_PARAM_CMDID,
|
|
WMI_10X_PEER_ASSOC_CMDID,
|
|
WMI_10X_PEER_ADD_WDS_ENTRY_CMDID,
|
|
WMI_10X_PEER_REMOVE_WDS_ENTRY_CMDID,
|
|
WMI_10X_PEER_MCAST_GROUP_CMDID,
|
|
|
|
/* beacon/management specific commands */
|
|
|
|
WMI_10X_BCN_TX_CMDID,
|
|
WMI_10X_BCN_PRB_TMPL_CMDID,
|
|
WMI_10X_BCN_FILTER_RX_CMDID,
|
|
WMI_10X_PRB_REQ_FILTER_RX_CMDID,
|
|
WMI_10X_MGMT_TX_CMDID,
|
|
|
|
/* commands to directly control ba negotiation directly from host. */
|
|
WMI_10X_ADDBA_CLEAR_RESP_CMDID,
|
|
WMI_10X_ADDBA_SEND_CMDID,
|
|
WMI_10X_ADDBA_STATUS_CMDID,
|
|
WMI_10X_DELBA_SEND_CMDID,
|
|
WMI_10X_ADDBA_SET_RESP_CMDID,
|
|
WMI_10X_SEND_SINGLEAMSDU_CMDID,
|
|
|
|
/* Station power save specific config */
|
|
WMI_10X_STA_POWERSAVE_MODE_CMDID,
|
|
WMI_10X_STA_POWERSAVE_PARAM_CMDID,
|
|
WMI_10X_STA_MIMO_PS_MODE_CMDID,
|
|
|
|
/* set debug log config */
|
|
WMI_10X_DBGLOG_CFG_CMDID,
|
|
|
|
/* DFS-specific commands */
|
|
WMI_10X_PDEV_DFS_ENABLE_CMDID,
|
|
WMI_10X_PDEV_DFS_DISABLE_CMDID,
|
|
|
|
/* QVIT specific command id */
|
|
WMI_10X_PDEV_QVIT_CMDID,
|
|
|
|
/* Offload Scan and Roaming related commands */
|
|
WMI_10X_ROAM_SCAN_MODE,
|
|
WMI_10X_ROAM_SCAN_RSSI_THRESHOLD,
|
|
WMI_10X_ROAM_SCAN_PERIOD,
|
|
WMI_10X_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
|
|
WMI_10X_ROAM_AP_PROFILE,
|
|
WMI_10X_OFL_SCAN_ADD_AP_PROFILE,
|
|
WMI_10X_OFL_SCAN_REMOVE_AP_PROFILE,
|
|
WMI_10X_OFL_SCAN_PERIOD,
|
|
|
|
/* P2P specific commands */
|
|
WMI_10X_P2P_DEV_SET_DEVICE_INFO,
|
|
WMI_10X_P2P_DEV_SET_DISCOVERABILITY,
|
|
WMI_10X_P2P_GO_SET_BEACON_IE,
|
|
WMI_10X_P2P_GO_SET_PROBE_RESP_IE,
|
|
|
|
/* AP power save specific config */
|
|
WMI_10X_AP_PS_PEER_PARAM_CMDID,
|
|
WMI_10X_AP_PS_PEER_UAPSD_COEX_CMDID,
|
|
|
|
/* Rate-control specific commands */
|
|
WMI_10X_PEER_RATE_RETRY_SCHED_CMDID,
|
|
|
|
/* WLAN Profiling commands. */
|
|
WMI_10X_WLAN_PROFILE_TRIGGER_CMDID,
|
|
WMI_10X_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
|
|
WMI_10X_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
|
|
WMI_10X_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
|
|
WMI_10X_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
|
|
|
|
/* Suspend resume command Ids */
|
|
WMI_10X_PDEV_SUSPEND_CMDID,
|
|
WMI_10X_PDEV_RESUME_CMDID,
|
|
|
|
/* Beacon filter commands */
|
|
WMI_10X_ADD_BCN_FILTER_CMDID,
|
|
WMI_10X_RMV_BCN_FILTER_CMDID,
|
|
|
|
/* WOW Specific WMI commands*/
|
|
WMI_10X_WOW_ADD_WAKE_PATTERN_CMDID,
|
|
WMI_10X_WOW_DEL_WAKE_PATTERN_CMDID,
|
|
WMI_10X_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
|
|
WMI_10X_WOW_ENABLE_CMDID,
|
|
WMI_10X_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
|
|
|
|
/* RTT measurement related cmd */
|
|
WMI_10X_RTT_MEASREQ_CMDID,
|
|
WMI_10X_RTT_TSF_CMDID,
|
|
|
|
/* transmit beacon by value */
|
|
WMI_10X_PDEV_SEND_BCN_CMDID,
|
|
|
|
/* F/W stats */
|
|
WMI_10X_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
|
|
WMI_10X_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
|
|
WMI_10X_REQUEST_STATS_CMDID,
|
|
|
|
/* GPIO Configuration */
|
|
WMI_10X_GPIO_CONFIG_CMDID,
|
|
WMI_10X_GPIO_OUTPUT_CMDID,
|
|
|
|
WMI_10X_PDEV_UTF_CMDID = WMI_10X_END_CMDID - 1,
|
|
};
|
|
|
|
enum wmi_10x_event_id {
|
|
WMI_10X_SERVICE_READY_EVENTID = 0x8000,
|
|
WMI_10X_READY_EVENTID,
|
|
WMI_10X_START_EVENTID = 0x9000,
|
|
WMI_10X_END_EVENTID = 0x9FFF,
|
|
|
|
/* Scan specific events */
|
|
WMI_10X_SCAN_EVENTID = WMI_10X_START_EVENTID,
|
|
WMI_10X_ECHO_EVENTID,
|
|
WMI_10X_DEBUG_MESG_EVENTID,
|
|
WMI_10X_UPDATE_STATS_EVENTID,
|
|
|
|
/* Instantaneous RSSI event */
|
|
WMI_10X_INST_RSSI_STATS_EVENTID,
|
|
|
|
/* VDEV specific events */
|
|
WMI_10X_VDEV_START_RESP_EVENTID,
|
|
WMI_10X_VDEV_STANDBY_REQ_EVENTID,
|
|
WMI_10X_VDEV_RESUME_REQ_EVENTID,
|
|
WMI_10X_VDEV_STOPPED_EVENTID,
|
|
|
|
/* peer specific events */
|
|
WMI_10X_PEER_STA_KICKOUT_EVENTID,
|
|
|
|
/* beacon/mgmt specific events */
|
|
WMI_10X_HOST_SWBA_EVENTID,
|
|
WMI_10X_TBTTOFFSET_UPDATE_EVENTID,
|
|
WMI_10X_MGMT_RX_EVENTID,
|
|
|
|
/* Channel stats event */
|
|
WMI_10X_CHAN_INFO_EVENTID,
|
|
|
|
/* PHY Error specific WMI event */
|
|
WMI_10X_PHYERR_EVENTID,
|
|
|
|
/* Roam event to trigger roaming on host */
|
|
WMI_10X_ROAM_EVENTID,
|
|
|
|
/* matching AP found from list of profiles */
|
|
WMI_10X_PROFILE_MATCH,
|
|
|
|
/* debug print message used for tracing FW code while debugging */
|
|
WMI_10X_DEBUG_PRINT_EVENTID,
|
|
/* VI spoecific event */
|
|
WMI_10X_PDEV_QVIT_EVENTID,
|
|
/* FW code profile data in response to profile request */
|
|
WMI_10X_WLAN_PROFILE_DATA_EVENTID,
|
|
|
|
/*RTT related event ID*/
|
|
WMI_10X_RTT_MEASUREMENT_REPORT_EVENTID,
|
|
WMI_10X_TSF_MEASUREMENT_REPORT_EVENTID,
|
|
WMI_10X_RTT_ERROR_REPORT_EVENTID,
|
|
|
|
WMI_10X_WOW_WAKEUP_HOST_EVENTID,
|
|
WMI_10X_DCS_INTERFERENCE_EVENTID,
|
|
|
|
/* TPC config for the current operating channel */
|
|
WMI_10X_PDEV_TPC_CONFIG_EVENTID,
|
|
|
|
WMI_10X_GPIO_INPUT_EVENTID,
|
|
WMI_10X_PDEV_UTF_EVENTID = WMI_10X_END_EVENTID - 1,
|
|
};
|
|
|
|
enum wmi_10_2_cmd_id {
|
|
WMI_10_2_START_CMDID = 0x9000,
|
|
WMI_10_2_END_CMDID = 0x9FFF,
|
|
WMI_10_2_INIT_CMDID,
|
|
WMI_10_2_START_SCAN_CMDID = WMI_10_2_START_CMDID,
|
|
WMI_10_2_STOP_SCAN_CMDID,
|
|
WMI_10_2_SCAN_CHAN_LIST_CMDID,
|
|
WMI_10_2_ECHO_CMDID,
|
|
WMI_10_2_PDEV_SET_REGDOMAIN_CMDID,
|
|
WMI_10_2_PDEV_SET_CHANNEL_CMDID,
|
|
WMI_10_2_PDEV_SET_PARAM_CMDID,
|
|
WMI_10_2_PDEV_PKTLOG_ENABLE_CMDID,
|
|
WMI_10_2_PDEV_PKTLOG_DISABLE_CMDID,
|
|
WMI_10_2_PDEV_SET_WMM_PARAMS_CMDID,
|
|
WMI_10_2_PDEV_SET_HT_CAP_IE_CMDID,
|
|
WMI_10_2_PDEV_SET_VHT_CAP_IE_CMDID,
|
|
WMI_10_2_PDEV_SET_BASE_MACADDR_CMDID,
|
|
WMI_10_2_PDEV_SET_QUIET_MODE_CMDID,
|
|
WMI_10_2_PDEV_GREEN_AP_PS_ENABLE_CMDID,
|
|
WMI_10_2_PDEV_GET_TPC_CONFIG_CMDID,
|
|
WMI_10_2_VDEV_CREATE_CMDID,
|
|
WMI_10_2_VDEV_DELETE_CMDID,
|
|
WMI_10_2_VDEV_START_REQUEST_CMDID,
|
|
WMI_10_2_VDEV_RESTART_REQUEST_CMDID,
|
|
WMI_10_2_VDEV_UP_CMDID,
|
|
WMI_10_2_VDEV_STOP_CMDID,
|
|
WMI_10_2_VDEV_DOWN_CMDID,
|
|
WMI_10_2_VDEV_STANDBY_RESPONSE_CMDID,
|
|
WMI_10_2_VDEV_RESUME_RESPONSE_CMDID,
|
|
WMI_10_2_VDEV_SET_PARAM_CMDID,
|
|
WMI_10_2_VDEV_INSTALL_KEY_CMDID,
|
|
WMI_10_2_VDEV_SET_DSCP_TID_MAP_CMDID,
|
|
WMI_10_2_PEER_CREATE_CMDID,
|
|
WMI_10_2_PEER_DELETE_CMDID,
|
|
WMI_10_2_PEER_FLUSH_TIDS_CMDID,
|
|
WMI_10_2_PEER_SET_PARAM_CMDID,
|
|
WMI_10_2_PEER_ASSOC_CMDID,
|
|
WMI_10_2_PEER_ADD_WDS_ENTRY_CMDID,
|
|
WMI_10_2_PEER_UPDATE_WDS_ENTRY_CMDID,
|
|
WMI_10_2_PEER_REMOVE_WDS_ENTRY_CMDID,
|
|
WMI_10_2_PEER_MCAST_GROUP_CMDID,
|
|
WMI_10_2_BCN_TX_CMDID,
|
|
WMI_10_2_BCN_PRB_TMPL_CMDID,
|
|
WMI_10_2_BCN_FILTER_RX_CMDID,
|
|
WMI_10_2_PRB_REQ_FILTER_RX_CMDID,
|
|
WMI_10_2_MGMT_TX_CMDID,
|
|
WMI_10_2_ADDBA_CLEAR_RESP_CMDID,
|
|
WMI_10_2_ADDBA_SEND_CMDID,
|
|
WMI_10_2_ADDBA_STATUS_CMDID,
|
|
WMI_10_2_DELBA_SEND_CMDID,
|
|
WMI_10_2_ADDBA_SET_RESP_CMDID,
|
|
WMI_10_2_SEND_SINGLEAMSDU_CMDID,
|
|
WMI_10_2_STA_POWERSAVE_MODE_CMDID,
|
|
WMI_10_2_STA_POWERSAVE_PARAM_CMDID,
|
|
WMI_10_2_STA_MIMO_PS_MODE_CMDID,
|
|
WMI_10_2_DBGLOG_CFG_CMDID,
|
|
WMI_10_2_PDEV_DFS_ENABLE_CMDID,
|
|
WMI_10_2_PDEV_DFS_DISABLE_CMDID,
|
|
WMI_10_2_PDEV_QVIT_CMDID,
|
|
WMI_10_2_ROAM_SCAN_MODE,
|
|
WMI_10_2_ROAM_SCAN_RSSI_THRESHOLD,
|
|
WMI_10_2_ROAM_SCAN_PERIOD,
|
|
WMI_10_2_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
|
|
WMI_10_2_ROAM_AP_PROFILE,
|
|
WMI_10_2_OFL_SCAN_ADD_AP_PROFILE,
|
|
WMI_10_2_OFL_SCAN_REMOVE_AP_PROFILE,
|
|
WMI_10_2_OFL_SCAN_PERIOD,
|
|
WMI_10_2_P2P_DEV_SET_DEVICE_INFO,
|
|
WMI_10_2_P2P_DEV_SET_DISCOVERABILITY,
|
|
WMI_10_2_P2P_GO_SET_BEACON_IE,
|
|
WMI_10_2_P2P_GO_SET_PROBE_RESP_IE,
|
|
WMI_10_2_AP_PS_PEER_PARAM_CMDID,
|
|
WMI_10_2_AP_PS_PEER_UAPSD_COEX_CMDID,
|
|
WMI_10_2_PEER_RATE_RETRY_SCHED_CMDID,
|
|
WMI_10_2_WLAN_PROFILE_TRIGGER_CMDID,
|
|
WMI_10_2_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
|
|
WMI_10_2_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
|
|
WMI_10_2_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
|
|
WMI_10_2_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
|
|
WMI_10_2_PDEV_SUSPEND_CMDID,
|
|
WMI_10_2_PDEV_RESUME_CMDID,
|
|
WMI_10_2_ADD_BCN_FILTER_CMDID,
|
|
WMI_10_2_RMV_BCN_FILTER_CMDID,
|
|
WMI_10_2_WOW_ADD_WAKE_PATTERN_CMDID,
|
|
WMI_10_2_WOW_DEL_WAKE_PATTERN_CMDID,
|
|
WMI_10_2_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
|
|
WMI_10_2_WOW_ENABLE_CMDID,
|
|
WMI_10_2_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
|
|
WMI_10_2_RTT_MEASREQ_CMDID,
|
|
WMI_10_2_RTT_TSF_CMDID,
|
|
WMI_10_2_RTT_KEEPALIVE_CMDID,
|
|
WMI_10_2_PDEV_SEND_BCN_CMDID,
|
|
WMI_10_2_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
|
|
WMI_10_2_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
|
|
WMI_10_2_REQUEST_STATS_CMDID,
|
|
WMI_10_2_GPIO_CONFIG_CMDID,
|
|
WMI_10_2_GPIO_OUTPUT_CMDID,
|
|
WMI_10_2_VDEV_RATEMASK_CMDID,
|
|
WMI_10_2_PDEV_SMART_ANT_ENABLE_CMDID,
|
|
WMI_10_2_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
|
|
WMI_10_2_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
|
|
WMI_10_2_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
|
|
WMI_10_2_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
|
|
WMI_10_2_FORCE_FW_HANG_CMDID,
|
|
WMI_10_2_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
|
|
WMI_10_2_PDEV_SET_CTL_TABLE_CMDID,
|
|
WMI_10_2_PDEV_SET_MIMOGAIN_TABLE_CMDID,
|
|
WMI_10_2_PDEV_RATEPWR_TABLE_CMDID,
|
|
WMI_10_2_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
|
|
WMI_10_2_PDEV_GET_INFO,
|
|
WMI_10_2_VDEV_GET_INFO,
|
|
WMI_10_2_VDEV_ATF_REQUEST_CMDID,
|
|
WMI_10_2_PEER_ATF_REQUEST_CMDID,
|
|
WMI_10_2_PDEV_GET_TEMPERATURE_CMDID,
|
|
WMI_10_2_MU_CAL_START_CMDID,
|
|
WMI_10_2_SET_LTEU_CONFIG_CMDID,
|
|
WMI_10_2_SET_CCA_PARAMS,
|
|
WMI_10_2_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
|
|
WMI_10_2_FWTEST_CMDID,
|
|
WMI_10_2_PDEV_SET_BB_TIMING_CONFIG_CMDID,
|
|
WMI_10_2_PDEV_UTF_CMDID = WMI_10_2_END_CMDID - 1,
|
|
};
|
|
|
|
enum wmi_10_2_event_id {
|
|
WMI_10_2_SERVICE_READY_EVENTID = 0x8000,
|
|
WMI_10_2_READY_EVENTID,
|
|
WMI_10_2_DEBUG_MESG_EVENTID,
|
|
WMI_10_2_START_EVENTID = 0x9000,
|
|
WMI_10_2_END_EVENTID = 0x9FFF,
|
|
WMI_10_2_SCAN_EVENTID = WMI_10_2_START_EVENTID,
|
|
WMI_10_2_ECHO_EVENTID,
|
|
WMI_10_2_UPDATE_STATS_EVENTID,
|
|
WMI_10_2_INST_RSSI_STATS_EVENTID,
|
|
WMI_10_2_VDEV_START_RESP_EVENTID,
|
|
WMI_10_2_VDEV_STANDBY_REQ_EVENTID,
|
|
WMI_10_2_VDEV_RESUME_REQ_EVENTID,
|
|
WMI_10_2_VDEV_STOPPED_EVENTID,
|
|
WMI_10_2_PEER_STA_KICKOUT_EVENTID,
|
|
WMI_10_2_HOST_SWBA_EVENTID,
|
|
WMI_10_2_TBTTOFFSET_UPDATE_EVENTID,
|
|
WMI_10_2_MGMT_RX_EVENTID,
|
|
WMI_10_2_CHAN_INFO_EVENTID,
|
|
WMI_10_2_PHYERR_EVENTID,
|
|
WMI_10_2_ROAM_EVENTID,
|
|
WMI_10_2_PROFILE_MATCH,
|
|
WMI_10_2_DEBUG_PRINT_EVENTID,
|
|
WMI_10_2_PDEV_QVIT_EVENTID,
|
|
WMI_10_2_WLAN_PROFILE_DATA_EVENTID,
|
|
WMI_10_2_RTT_MEASUREMENT_REPORT_EVENTID,
|
|
WMI_10_2_TSF_MEASUREMENT_REPORT_EVENTID,
|
|
WMI_10_2_RTT_ERROR_REPORT_EVENTID,
|
|
WMI_10_2_RTT_KEEPALIVE_EVENTID,
|
|
WMI_10_2_WOW_WAKEUP_HOST_EVENTID,
|
|
WMI_10_2_DCS_INTERFERENCE_EVENTID,
|
|
WMI_10_2_PDEV_TPC_CONFIG_EVENTID,
|
|
WMI_10_2_GPIO_INPUT_EVENTID,
|
|
WMI_10_2_PEER_RATECODE_LIST_EVENTID,
|
|
WMI_10_2_GENERIC_BUFFER_EVENTID,
|
|
WMI_10_2_MCAST_BUF_RELEASE_EVENTID,
|
|
WMI_10_2_MCAST_LIST_AGEOUT_EVENTID,
|
|
WMI_10_2_WDS_PEER_EVENTID,
|
|
WMI_10_2_PEER_STA_PS_STATECHG_EVENTID,
|
|
WMI_10_2_PDEV_TEMPERATURE_EVENTID,
|
|
WMI_10_2_MU_REPORT_EVENTID,
|
|
WMI_10_2_PDEV_BSS_CHAN_INFO_EVENTID,
|
|
WMI_10_2_PDEV_UTF_EVENTID = WMI_10_2_END_EVENTID - 1,
|
|
};
|
|
|
|
enum wmi_10_4_cmd_id {
|
|
WMI_10_4_START_CMDID = 0x9000,
|
|
WMI_10_4_END_CMDID = 0x9FFF,
|
|
WMI_10_4_INIT_CMDID,
|
|
WMI_10_4_START_SCAN_CMDID = WMI_10_4_START_CMDID,
|
|
WMI_10_4_STOP_SCAN_CMDID,
|
|
WMI_10_4_SCAN_CHAN_LIST_CMDID,
|
|
WMI_10_4_SCAN_SCH_PRIO_TBL_CMDID,
|
|
WMI_10_4_SCAN_UPDATE_REQUEST_CMDID,
|
|
WMI_10_4_ECHO_CMDID,
|
|
WMI_10_4_PDEV_SET_REGDOMAIN_CMDID,
|
|
WMI_10_4_PDEV_SET_CHANNEL_CMDID,
|
|
WMI_10_4_PDEV_SET_PARAM_CMDID,
|
|
WMI_10_4_PDEV_PKTLOG_ENABLE_CMDID,
|
|
WMI_10_4_PDEV_PKTLOG_DISABLE_CMDID,
|
|
WMI_10_4_PDEV_SET_WMM_PARAMS_CMDID,
|
|
WMI_10_4_PDEV_SET_HT_CAP_IE_CMDID,
|
|
WMI_10_4_PDEV_SET_VHT_CAP_IE_CMDID,
|
|
WMI_10_4_PDEV_SET_BASE_MACADDR_CMDID,
|
|
WMI_10_4_PDEV_SET_DSCP_TID_MAP_CMDID,
|
|
WMI_10_4_PDEV_SET_QUIET_MODE_CMDID,
|
|
WMI_10_4_PDEV_GREEN_AP_PS_ENABLE_CMDID,
|
|
WMI_10_4_PDEV_GET_TPC_CONFIG_CMDID,
|
|
WMI_10_4_VDEV_CREATE_CMDID,
|
|
WMI_10_4_VDEV_DELETE_CMDID,
|
|
WMI_10_4_VDEV_START_REQUEST_CMDID,
|
|
WMI_10_4_VDEV_RESTART_REQUEST_CMDID,
|
|
WMI_10_4_VDEV_UP_CMDID,
|
|
WMI_10_4_VDEV_STOP_CMDID,
|
|
WMI_10_4_VDEV_DOWN_CMDID,
|
|
WMI_10_4_VDEV_STANDBY_RESPONSE_CMDID,
|
|
WMI_10_4_VDEV_RESUME_RESPONSE_CMDID,
|
|
WMI_10_4_VDEV_SET_PARAM_CMDID,
|
|
WMI_10_4_VDEV_INSTALL_KEY_CMDID,
|
|
WMI_10_4_WLAN_PEER_CACHING_ADD_PEER_CMDID,
|
|
WMI_10_4_WLAN_PEER_CACHING_EVICT_PEER_CMDID,
|
|
WMI_10_4_WLAN_PEER_CACHING_RESTORE_PEER_CMDID,
|
|
WMI_10_4_WLAN_PEER_CACHING_PRINT_ALL_PEERS_INFO_CMDID,
|
|
WMI_10_4_PEER_CREATE_CMDID,
|
|
WMI_10_4_PEER_DELETE_CMDID,
|
|
WMI_10_4_PEER_FLUSH_TIDS_CMDID,
|
|
WMI_10_4_PEER_SET_PARAM_CMDID,
|
|
WMI_10_4_PEER_ASSOC_CMDID,
|
|
WMI_10_4_PEER_ADD_WDS_ENTRY_CMDID,
|
|
WMI_10_4_PEER_UPDATE_WDS_ENTRY_CMDID,
|
|
WMI_10_4_PEER_REMOVE_WDS_ENTRY_CMDID,
|
|
WMI_10_4_PEER_ADD_PROXY_STA_ENTRY_CMDID,
|
|
WMI_10_4_PEER_MCAST_GROUP_CMDID,
|
|
WMI_10_4_BCN_TX_CMDID,
|
|
WMI_10_4_PDEV_SEND_BCN_CMDID,
|
|
WMI_10_4_BCN_PRB_TMPL_CMDID,
|
|
WMI_10_4_BCN_FILTER_RX_CMDID,
|
|
WMI_10_4_PRB_REQ_FILTER_RX_CMDID,
|
|
WMI_10_4_MGMT_TX_CMDID,
|
|
WMI_10_4_PRB_TMPL_CMDID,
|
|
WMI_10_4_ADDBA_CLEAR_RESP_CMDID,
|
|
WMI_10_4_ADDBA_SEND_CMDID,
|
|
WMI_10_4_ADDBA_STATUS_CMDID,
|
|
WMI_10_4_DELBA_SEND_CMDID,
|
|
WMI_10_4_ADDBA_SET_RESP_CMDID,
|
|
WMI_10_4_SEND_SINGLEAMSDU_CMDID,
|
|
WMI_10_4_STA_POWERSAVE_MODE_CMDID,
|
|
WMI_10_4_STA_POWERSAVE_PARAM_CMDID,
|
|
WMI_10_4_STA_MIMO_PS_MODE_CMDID,
|
|
WMI_10_4_DBGLOG_CFG_CMDID,
|
|
WMI_10_4_PDEV_DFS_ENABLE_CMDID,
|
|
WMI_10_4_PDEV_DFS_DISABLE_CMDID,
|
|
WMI_10_4_PDEV_QVIT_CMDID,
|
|
WMI_10_4_ROAM_SCAN_MODE,
|
|
WMI_10_4_ROAM_SCAN_RSSI_THRESHOLD,
|
|
WMI_10_4_ROAM_SCAN_PERIOD,
|
|
WMI_10_4_ROAM_SCAN_RSSI_CHANGE_THRESHOLD,
|
|
WMI_10_4_ROAM_AP_PROFILE,
|
|
WMI_10_4_OFL_SCAN_ADD_AP_PROFILE,
|
|
WMI_10_4_OFL_SCAN_REMOVE_AP_PROFILE,
|
|
WMI_10_4_OFL_SCAN_PERIOD,
|
|
WMI_10_4_P2P_DEV_SET_DEVICE_INFO,
|
|
WMI_10_4_P2P_DEV_SET_DISCOVERABILITY,
|
|
WMI_10_4_P2P_GO_SET_BEACON_IE,
|
|
WMI_10_4_P2P_GO_SET_PROBE_RESP_IE,
|
|
WMI_10_4_P2P_SET_VENDOR_IE_DATA_CMDID,
|
|
WMI_10_4_AP_PS_PEER_PARAM_CMDID,
|
|
WMI_10_4_AP_PS_PEER_UAPSD_COEX_CMDID,
|
|
WMI_10_4_PEER_RATE_RETRY_SCHED_CMDID,
|
|
WMI_10_4_WLAN_PROFILE_TRIGGER_CMDID,
|
|
WMI_10_4_WLAN_PROFILE_SET_HIST_INTVL_CMDID,
|
|
WMI_10_4_WLAN_PROFILE_GET_PROFILE_DATA_CMDID,
|
|
WMI_10_4_WLAN_PROFILE_ENABLE_PROFILE_ID_CMDID,
|
|
WMI_10_4_WLAN_PROFILE_LIST_PROFILE_ID_CMDID,
|
|
WMI_10_4_PDEV_SUSPEND_CMDID,
|
|
WMI_10_4_PDEV_RESUME_CMDID,
|
|
WMI_10_4_ADD_BCN_FILTER_CMDID,
|
|
WMI_10_4_RMV_BCN_FILTER_CMDID,
|
|
WMI_10_4_WOW_ADD_WAKE_PATTERN_CMDID,
|
|
WMI_10_4_WOW_DEL_WAKE_PATTERN_CMDID,
|
|
WMI_10_4_WOW_ENABLE_DISABLE_WAKE_EVENT_CMDID,
|
|
WMI_10_4_WOW_ENABLE_CMDID,
|
|
WMI_10_4_WOW_HOSTWAKEUP_FROM_SLEEP_CMDID,
|
|
WMI_10_4_RTT_MEASREQ_CMDID,
|
|
WMI_10_4_RTT_TSF_CMDID,
|
|
WMI_10_4_RTT_KEEPALIVE_CMDID,
|
|
WMI_10_4_OEM_REQ_CMDID,
|
|
WMI_10_4_NAN_CMDID,
|
|
WMI_10_4_VDEV_SPECTRAL_SCAN_CONFIGURE_CMDID,
|
|
WMI_10_4_VDEV_SPECTRAL_SCAN_ENABLE_CMDID,
|
|
WMI_10_4_REQUEST_STATS_CMDID,
|
|
WMI_10_4_GPIO_CONFIG_CMDID,
|
|
WMI_10_4_GPIO_OUTPUT_CMDID,
|
|
WMI_10_4_VDEV_RATEMASK_CMDID,
|
|
WMI_10_4_CSA_OFFLOAD_ENABLE_CMDID,
|
|
WMI_10_4_GTK_OFFLOAD_CMDID,
|
|
WMI_10_4_QBOOST_CFG_CMDID,
|
|
WMI_10_4_CSA_OFFLOAD_CHANSWITCH_CMDID,
|
|
WMI_10_4_PDEV_SMART_ANT_ENABLE_CMDID,
|
|
WMI_10_4_PDEV_SMART_ANT_SET_RX_ANTENNA_CMDID,
|
|
WMI_10_4_PEER_SMART_ANT_SET_TX_ANTENNA_CMDID,
|
|
WMI_10_4_PEER_SMART_ANT_SET_TRAIN_INFO_CMDID,
|
|
WMI_10_4_PEER_SMART_ANT_SET_NODE_CONFIG_OPS_CMDID,
|
|
WMI_10_4_VDEV_SET_KEEPALIVE_CMDID,
|
|
WMI_10_4_VDEV_GET_KEEPALIVE_CMDID,
|
|
WMI_10_4_FORCE_FW_HANG_CMDID,
|
|
WMI_10_4_PDEV_SET_ANTENNA_SWITCH_TABLE_CMDID,
|
|
WMI_10_4_PDEV_SET_CTL_TABLE_CMDID,
|
|
WMI_10_4_PDEV_SET_MIMOGAIN_TABLE_CMDID,
|
|
WMI_10_4_PDEV_RATEPWR_TABLE_CMDID,
|
|
WMI_10_4_PDEV_RATEPWR_CHAINMSK_TABLE_CMDID,
|
|
WMI_10_4_PDEV_FIPS_CMDID,
|
|
WMI_10_4_TT_SET_CONF_CMDID,
|
|
WMI_10_4_FWTEST_CMDID,
|
|
WMI_10_4_VDEV_ATF_REQUEST_CMDID,
|
|
WMI_10_4_PEER_ATF_REQUEST_CMDID,
|
|
WMI_10_4_PDEV_GET_ANI_CCK_CONFIG_CMDID,
|
|
WMI_10_4_PDEV_GET_ANI_OFDM_CONFIG_CMDID,
|
|
WMI_10_4_PDEV_RESERVE_AST_ENTRY_CMDID,
|
|
WMI_10_4_PDEV_GET_NFCAL_POWER_CMDID,
|
|
WMI_10_4_PDEV_GET_TPC_CMDID,
|
|
WMI_10_4_PDEV_GET_AST_INFO_CMDID,
|
|
WMI_10_4_VDEV_SET_DSCP_TID_MAP_CMDID,
|
|
WMI_10_4_PDEV_GET_TEMPERATURE_CMDID,
|
|
WMI_10_4_PDEV_GET_INFO_CMDID,
|
|
WMI_10_4_VDEV_GET_INFO_CMDID,
|
|
WMI_10_4_VDEV_FILTER_NEIGHBOR_RX_PACKETS_CMDID,
|
|
WMI_10_4_MU_CAL_START_CMDID,
|
|
WMI_10_4_SET_CCA_PARAMS_CMDID,
|
|
WMI_10_4_PDEV_BSS_CHAN_INFO_REQUEST_CMDID,
|
|
WMI_10_4_EXT_RESOURCE_CFG_CMDID,
|
|
WMI_10_4_VDEV_SET_IE_CMDID,
|
|
WMI_10_4_SET_LTEU_CONFIG_CMDID,
|
|
WMI_10_4_ATF_SSID_GROUPING_REQUEST_CMDID,
|
|
WMI_10_4_PEER_ATF_EXT_REQUEST_CMDID,
|
|
WMI_10_4_SET_PERIODIC_CHANNEL_STATS_CONFIG,
|
|
WMI_10_4_PEER_BWF_REQUEST_CMDID,
|
|
WMI_10_4_BTCOEX_CFG_CMDID,
|
|
WMI_10_4_PEER_TX_MU_TXMIT_COUNT_CMDID,
|
|
WMI_10_4_PEER_TX_MU_TXMIT_RSTCNT_CMDID,
|
|
WMI_10_4_PEER_GID_USERPOS_LIST_CMDID,
|
|
WMI_10_4_PDEV_CHECK_CAL_VERSION_CMDID,
|
|
WMI_10_4_COEX_VERSION_CFG_CMID,
|
|
WMI_10_4_PDEV_GET_RX_FILTER_CMDID,
|
|
WMI_10_4_PDEV_EXTENDED_NSS_CFG_CMDID,
|
|
WMI_10_4_VDEV_SET_SCAN_NAC_RSSI_CMDID,
|
|
WMI_10_4_PROG_GPIO_BAND_SELECT_CMDID,
|
|
WMI_10_4_CONFIG_SMART_LOGGING_CMDID,
|
|
WMI_10_4_DEBUG_FATAL_CONDITION_CMDID,
|
|
WMI_10_4_GET_TSF_TIMER_CMDID,
|
|
WMI_10_4_PDEV_GET_TPC_TABLE_CMDID,
|
|
WMI_10_4_VDEV_SIFS_TRIGGER_TIME_CMDID,
|
|
WMI_10_4_PDEV_WDS_ENTRY_LIST_CMDID,
|
|
WMI_10_4_TDLS_SET_STATE_CMDID,
|
|
WMI_10_4_TDLS_PEER_UPDATE_CMDID,
|
|
WMI_10_4_TDLS_SET_OFFCHAN_MODE_CMDID,
|
|
WMI_10_4_PDEV_SEND_FD_CMDID,
|
|
WMI_10_4_ENABLE_FILS_CMDID,
|
|
WMI_10_4_PDEV_SET_BRIDGE_MACADDR_CMDID,
|
|
WMI_10_4_ATF_GROUP_WMM_AC_CONFIG_REQUEST_CMDID,
|
|
WMI_10_4_RADAR_FOUND_CMDID,
|
|
WMI_10_4_PDEV_UTF_CMDID = WMI_10_4_END_CMDID - 1,
|
|
};
|
|
|
|
enum wmi_10_4_event_id {
|
|
WMI_10_4_SERVICE_READY_EVENTID = 0x8000,
|
|
WMI_10_4_READY_EVENTID,
|
|
WMI_10_4_DEBUG_MESG_EVENTID,
|
|
WMI_10_4_START_EVENTID = 0x9000,
|
|
WMI_10_4_END_EVENTID = 0x9FFF,
|
|
WMI_10_4_SCAN_EVENTID = WMI_10_4_START_EVENTID,
|
|
WMI_10_4_ECHO_EVENTID,
|
|
WMI_10_4_UPDATE_STATS_EVENTID,
|
|
WMI_10_4_INST_RSSI_STATS_EVENTID,
|
|
WMI_10_4_VDEV_START_RESP_EVENTID,
|
|
WMI_10_4_VDEV_STANDBY_REQ_EVENTID,
|
|
WMI_10_4_VDEV_RESUME_REQ_EVENTID,
|
|
WMI_10_4_VDEV_STOPPED_EVENTID,
|
|
WMI_10_4_PEER_STA_KICKOUT_EVENTID,
|
|
WMI_10_4_HOST_SWBA_EVENTID,
|
|
WMI_10_4_TBTTOFFSET_UPDATE_EVENTID,
|
|
WMI_10_4_MGMT_RX_EVENTID,
|
|
WMI_10_4_CHAN_INFO_EVENTID,
|
|
WMI_10_4_PHYERR_EVENTID,
|
|
WMI_10_4_ROAM_EVENTID,
|
|
WMI_10_4_PROFILE_MATCH,
|
|
WMI_10_4_DEBUG_PRINT_EVENTID,
|
|
WMI_10_4_PDEV_QVIT_EVENTID,
|
|
WMI_10_4_WLAN_PROFILE_DATA_EVENTID,
|
|
WMI_10_4_RTT_MEASUREMENT_REPORT_EVENTID,
|
|
WMI_10_4_TSF_MEASUREMENT_REPORT_EVENTID,
|
|
WMI_10_4_RTT_ERROR_REPORT_EVENTID,
|
|
WMI_10_4_RTT_KEEPALIVE_EVENTID,
|
|
WMI_10_4_OEM_CAPABILITY_EVENTID,
|
|
WMI_10_4_OEM_MEASUREMENT_REPORT_EVENTID,
|
|
WMI_10_4_OEM_ERROR_REPORT_EVENTID,
|
|
WMI_10_4_NAN_EVENTID,
|
|
WMI_10_4_WOW_WAKEUP_HOST_EVENTID,
|
|
WMI_10_4_GTK_OFFLOAD_STATUS_EVENTID,
|
|
WMI_10_4_GTK_REKEY_FAIL_EVENTID,
|
|
WMI_10_4_DCS_INTERFERENCE_EVENTID,
|
|
WMI_10_4_PDEV_TPC_CONFIG_EVENTID,
|
|
WMI_10_4_CSA_HANDLING_EVENTID,
|
|
WMI_10_4_GPIO_INPUT_EVENTID,
|
|
WMI_10_4_PEER_RATECODE_LIST_EVENTID,
|
|
WMI_10_4_GENERIC_BUFFER_EVENTID,
|
|
WMI_10_4_MCAST_BUF_RELEASE_EVENTID,
|
|
WMI_10_4_MCAST_LIST_AGEOUT_EVENTID,
|
|
WMI_10_4_VDEV_GET_KEEPALIVE_EVENTID,
|
|
WMI_10_4_WDS_PEER_EVENTID,
|
|
WMI_10_4_PEER_STA_PS_STATECHG_EVENTID,
|
|
WMI_10_4_PDEV_FIPS_EVENTID,
|
|
WMI_10_4_TT_STATS_EVENTID,
|
|
WMI_10_4_PDEV_CHANNEL_HOPPING_EVENTID,
|
|
WMI_10_4_PDEV_ANI_CCK_LEVEL_EVENTID,
|
|
WMI_10_4_PDEV_ANI_OFDM_LEVEL_EVENTID,
|
|
WMI_10_4_PDEV_RESERVE_AST_ENTRY_EVENTID,
|
|
WMI_10_4_PDEV_NFCAL_POWER_EVENTID,
|
|
WMI_10_4_PDEV_TPC_EVENTID,
|
|
WMI_10_4_PDEV_GET_AST_INFO_EVENTID,
|
|
WMI_10_4_PDEV_TEMPERATURE_EVENTID,
|
|
WMI_10_4_PDEV_NFCAL_POWER_ALL_CHANNELS_EVENTID,
|
|
WMI_10_4_PDEV_BSS_CHAN_INFO_EVENTID,
|
|
WMI_10_4_MU_REPORT_EVENTID,
|
|
WMI_10_4_TX_DATA_TRAFFIC_CTRL_EVENTID,
|
|
WMI_10_4_PEER_TX_MU_TXMIT_COUNT_EVENTID,
|
|
WMI_10_4_PEER_GID_USERPOS_LIST_EVENTID,
|
|
WMI_10_4_PDEV_CHECK_CAL_VERSION_EVENTID,
|
|
WMI_10_4_ATF_PEER_STATS_EVENTID,
|
|
WMI_10_4_PDEV_GET_RX_FILTER_EVENTID,
|
|
WMI_10_4_NAC_RSSI_EVENTID,
|
|
WMI_10_4_DEBUG_FATAL_CONDITION_EVENTID,
|
|
WMI_10_4_GET_TSF_TIMER_RESP_EVENTID,
|
|
WMI_10_4_PDEV_TPC_TABLE_EVENTID,
|
|
WMI_10_4_PDEV_WDS_ENTRY_LIST_EVENTID,
|
|
WMI_10_4_TDLS_PEER_EVENTID,
|
|
WMI_10_4_HOST_SWFDA_EVENTID,
|
|
WMI_10_4_ESP_ESTIMATE_EVENTID,
|
|
WMI_10_4_DFS_STATUS_CHECK_EVENTID,
|
|
WMI_10_4_PDEV_UTF_EVENTID = WMI_10_4_END_EVENTID - 1,
|
|
};
|
|
|
|
enum wmi_phy_mode {
|
|
MODE_11A = 0, /* 11a Mode */
|
|
MODE_11G = 1, /* 11b/g Mode */
|
|
MODE_11B = 2, /* 11b Mode */
|
|
MODE_11GONLY = 3, /* 11g only Mode */
|
|
MODE_11NA_HT20 = 4, /* 11a HT20 mode */
|
|
MODE_11NG_HT20 = 5, /* 11g HT20 mode */
|
|
MODE_11NA_HT40 = 6, /* 11a HT40 mode */
|
|
MODE_11NG_HT40 = 7, /* 11g HT40 mode */
|
|
MODE_11AC_VHT20 = 8,
|
|
MODE_11AC_VHT40 = 9,
|
|
MODE_11AC_VHT80 = 10,
|
|
/* MODE_11AC_VHT160 = 11, */
|
|
MODE_11AC_VHT20_2G = 11,
|
|
MODE_11AC_VHT40_2G = 12,
|
|
MODE_11AC_VHT80_2G = 13,
|
|
MODE_11AC_VHT80_80 = 14,
|
|
MODE_11AC_VHT160 = 15,
|
|
MODE_UNKNOWN = 16,
|
|
MODE_MAX = 16
|
|
};
|
|
|
|
static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode)
|
|
{
|
|
switch (mode) {
|
|
case MODE_11A:
|
|
return "11a";
|
|
case MODE_11G:
|
|
return "11g";
|
|
case MODE_11B:
|
|
return "11b";
|
|
case MODE_11GONLY:
|
|
return "11gonly";
|
|
case MODE_11NA_HT20:
|
|
return "11na-ht20";
|
|
case MODE_11NG_HT20:
|
|
return "11ng-ht20";
|
|
case MODE_11NA_HT40:
|
|
return "11na-ht40";
|
|
case MODE_11NG_HT40:
|
|
return "11ng-ht40";
|
|
case MODE_11AC_VHT20:
|
|
return "11ac-vht20";
|
|
case MODE_11AC_VHT40:
|
|
return "11ac-vht40";
|
|
case MODE_11AC_VHT80:
|
|
return "11ac-vht80";
|
|
case MODE_11AC_VHT160:
|
|
return "11ac-vht160";
|
|
case MODE_11AC_VHT80_80:
|
|
return "11ac-vht80+80";
|
|
case MODE_11AC_VHT20_2G:
|
|
return "11ac-vht20-2g";
|
|
case MODE_11AC_VHT40_2G:
|
|
return "11ac-vht40-2g";
|
|
case MODE_11AC_VHT80_2G:
|
|
return "11ac-vht80-2g";
|
|
case MODE_UNKNOWN:
|
|
/* skip */
|
|
break;
|
|
|
|
/* no default handler to allow compiler to check that the
|
|
* enum is fully handled
|
|
*/
|
|
}
|
|
|
|
return "<unknown>";
|
|
}
|
|
|
|
#define WMI_CHAN_LIST_TAG 0x1
|
|
#define WMI_SSID_LIST_TAG 0x2
|
|
#define WMI_BSSID_LIST_TAG 0x3
|
|
#define WMI_IE_TAG 0x4
|
|
|
|
struct wmi_channel {
|
|
__le32 mhz;
|
|
__le32 band_center_freq1;
|
|
__le32 band_center_freq2; /* valid for 11ac, 80plus80 */
|
|
union {
|
|
__le32 flags; /* WMI_CHAN_FLAG_ */
|
|
struct {
|
|
u8 mode; /* only 6 LSBs */
|
|
} __packed;
|
|
} __packed;
|
|
union {
|
|
__le32 reginfo0;
|
|
struct {
|
|
/* note: power unit is 0.5 dBm */
|
|
u8 min_power;
|
|
u8 max_power;
|
|
u8 reg_power;
|
|
u8 reg_classid;
|
|
} __packed;
|
|
} __packed;
|
|
union {
|
|
__le32 reginfo1;
|
|
struct {
|
|
u8 antenna_max;
|
|
u8 max_tx_power;
|
|
} __packed;
|
|
} __packed;
|
|
} __packed;
|
|
|
|
struct wmi_channel_arg {
|
|
u32 freq;
|
|
u32 band_center_freq1;
|
|
u32 band_center_freq2;
|
|
bool passive;
|
|
bool allow_ibss;
|
|
bool allow_ht;
|
|
bool allow_vht;
|
|
bool ht40plus;
|
|
bool chan_radar;
|
|
/* note: power unit is 0.5 dBm */
|
|
u32 min_power;
|
|
u32 max_power;
|
|
u32 max_reg_power;
|
|
u32 max_antenna_gain;
|
|
u32 reg_class_id;
|
|
enum wmi_phy_mode mode;
|
|
};
|
|
|
|
enum wmi_channel_change_cause {
|
|
WMI_CHANNEL_CHANGE_CAUSE_NONE = 0,
|
|
WMI_CHANNEL_CHANGE_CAUSE_CSA,
|
|
};
|
|
|
|
#define WMI_CHAN_FLAG_HT40_PLUS (1 << 6)
|
|
#define WMI_CHAN_FLAG_PASSIVE (1 << 7)
|
|
#define WMI_CHAN_FLAG_ADHOC_ALLOWED (1 << 8)
|
|
#define WMI_CHAN_FLAG_AP_DISABLED (1 << 9)
|
|
#define WMI_CHAN_FLAG_DFS (1 << 10)
|
|
#define WMI_CHAN_FLAG_ALLOW_HT (1 << 11)
|
|
#define WMI_CHAN_FLAG_ALLOW_VHT (1 << 12)
|
|
|
|
/* Indicate reason for channel switch */
|
|
#define WMI_CHANNEL_CHANGE_CAUSE_CSA (1 << 13)
|
|
|
|
#define WMI_MAX_SPATIAL_STREAM 3 /* default max ss */
|
|
|
|
/* HT Capabilities*/
|
|
#define WMI_HT_CAP_ENABLED 0x0001 /* HT Enabled/ disabled */
|
|
#define WMI_HT_CAP_HT20_SGI 0x0002 /* Short Guard Interval with HT20 */
|
|
#define WMI_HT_CAP_DYNAMIC_SMPS 0x0004 /* Dynamic MIMO powersave */
|
|
#define WMI_HT_CAP_TX_STBC 0x0008 /* B3 TX STBC */
|
|
#define WMI_HT_CAP_TX_STBC_MASK_SHIFT 3
|
|
#define WMI_HT_CAP_RX_STBC 0x0030 /* B4-B5 RX STBC */
|
|
#define WMI_HT_CAP_RX_STBC_MASK_SHIFT 4
|
|
#define WMI_HT_CAP_LDPC 0x0040 /* LDPC supported */
|
|
#define WMI_HT_CAP_L_SIG_TXOP_PROT 0x0080 /* L-SIG TXOP Protection */
|
|
#define WMI_HT_CAP_MPDU_DENSITY 0x0700 /* MPDU Density */
|
|
#define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT 8
|
|
#define WMI_HT_CAP_HT40_SGI 0x0800
|
|
#define WMI_HT_CAP_RX_LDPC 0x1000 /* LDPC RX support */
|
|
#define WMI_HT_CAP_TX_LDPC 0x2000 /* LDPC TX support */
|
|
|
|
#define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED | \
|
|
WMI_HT_CAP_HT20_SGI | \
|
|
WMI_HT_CAP_HT40_SGI | \
|
|
WMI_HT_CAP_TX_STBC | \
|
|
WMI_HT_CAP_RX_STBC | \
|
|
WMI_HT_CAP_LDPC)
|
|
|
|
/*
|
|
* WMI_VHT_CAP_* these maps to ieee 802.11ac vht capability information
|
|
* field. The fields not defined here are not supported, or reserved.
|
|
* Do not change these masks and if you have to add new one follow the
|
|
* bitmask as specified by 802.11ac draft.
|
|
*/
|
|
|
|
#define WMI_VHT_CAP_MAX_MPDU_LEN_MASK 0x00000003
|
|
#define WMI_VHT_CAP_RX_LDPC 0x00000010
|
|
#define WMI_VHT_CAP_SGI_80MHZ 0x00000020
|
|
#define WMI_VHT_CAP_SGI_160MHZ 0x00000040
|
|
#define WMI_VHT_CAP_TX_STBC 0x00000080
|
|
#define WMI_VHT_CAP_RX_STBC_MASK 0x00000300
|
|
#define WMI_VHT_CAP_RX_STBC_MASK_SHIFT 8
|
|
#define WMI_VHT_CAP_SU_BFER 0x00000800
|
|
#define WMI_VHT_CAP_SU_BFEE 0x00001000
|
|
#define WMI_VHT_CAP_MAX_CS_ANT_MASK 0x0000E000
|
|
#define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT 13
|
|
#define WMI_VHT_CAP_MAX_SND_DIM_MASK 0x00070000
|
|
#define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT 16
|
|
#define WMI_VHT_CAP_MU_BFER 0x00080000
|
|
#define WMI_VHT_CAP_MU_BFEE 0x00100000
|
|
#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP 0x03800000
|
|
#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIFT 23
|
|
#define WMI_VHT_CAP_RX_FIXED_ANT 0x10000000
|
|
#define WMI_VHT_CAP_TX_FIXED_ANT 0x20000000
|
|
|
|
/* The following also refer for max HT AMSDU */
|
|
#define WMI_VHT_CAP_MAX_MPDU_LEN_3839 0x00000000
|
|
#define WMI_VHT_CAP_MAX_MPDU_LEN_7935 0x00000001
|
|
#define WMI_VHT_CAP_MAX_MPDU_LEN_11454 0x00000002
|
|
|
|
#define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454 | \
|
|
WMI_VHT_CAP_RX_LDPC | \
|
|
WMI_VHT_CAP_SGI_80MHZ | \
|
|
WMI_VHT_CAP_TX_STBC | \
|
|
WMI_VHT_CAP_RX_STBC_MASK | \
|
|
WMI_VHT_CAP_MAX_AMPDU_LEN_EXP | \
|
|
WMI_VHT_CAP_RX_FIXED_ANT | \
|
|
WMI_VHT_CAP_TX_FIXED_ANT)
|
|
|
|
/*
|
|
* Interested readers refer to Rx/Tx MCS Map definition as defined in
|
|
* 802.11ac
|
|
*/
|
|
#define WMI_VHT_MAX_MCS_4_SS_MASK(r, ss) ((3 & (r)) << (((ss) - 1) << 1))
|
|
#define WMI_VHT_MAX_SUPP_RATE_MASK 0x1fff0000
|
|
#define WMI_VHT_MAX_SUPP_RATE_MASK_SHIFT 16
|
|
|
|
enum {
|
|
REGDMN_MODE_11A = 0x00001, /* 11a channels */
|
|
REGDMN_MODE_TURBO = 0x00002, /* 11a turbo-only channels */
|
|
REGDMN_MODE_11B = 0x00004, /* 11b channels */
|
|
REGDMN_MODE_PUREG = 0x00008, /* 11g channels (OFDM only) */
|
|
REGDMN_MODE_11G = 0x00008, /* XXX historical */
|
|
REGDMN_MODE_108G = 0x00020, /* 11a+Turbo channels */
|
|
REGDMN_MODE_108A = 0x00040, /* 11g+Turbo channels */
|
|
REGDMN_MODE_XR = 0x00100, /* XR channels */
|
|
REGDMN_MODE_11A_HALF_RATE = 0x00200, /* 11A half rate channels */
|
|
REGDMN_MODE_11A_QUARTER_RATE = 0x00400, /* 11A quarter rate channels */
|
|
REGDMN_MODE_11NG_HT20 = 0x00800, /* 11N-G HT20 channels */
|
|
REGDMN_MODE_11NA_HT20 = 0x01000, /* 11N-A HT20 channels */
|
|
REGDMN_MODE_11NG_HT40PLUS = 0x02000, /* 11N-G HT40 + channels */
|
|
REGDMN_MODE_11NG_HT40MINUS = 0x04000, /* 11N-G HT40 - channels */
|
|
REGDMN_MODE_11NA_HT40PLUS = 0x08000, /* 11N-A HT40 + channels */
|
|
REGDMN_MODE_11NA_HT40MINUS = 0x10000, /* 11N-A HT40 - channels */
|
|
REGDMN_MODE_11AC_VHT20 = 0x20000, /* 5Ghz, VHT20 */
|
|
REGDMN_MODE_11AC_VHT40PLUS = 0x40000, /* 5Ghz, VHT40 + channels */
|
|
REGDMN_MODE_11AC_VHT40MINUS = 0x80000, /* 5Ghz VHT40 - channels */
|
|
REGDMN_MODE_11AC_VHT80 = 0x100000, /* 5Ghz, VHT80 channels */
|
|
REGDMN_MODE_11AC_VHT160 = 0x200000, /* 5Ghz, VHT160 channels */
|
|
REGDMN_MODE_11AC_VHT80_80 = 0x400000, /* 5Ghz, VHT80+80 channels */
|
|
REGDMN_MODE_ALL = 0xffffffff
|
|
};
|
|
|
|
#define REGDMN_CAP1_CHAN_HALF_RATE 0x00000001
|
|
#define REGDMN_CAP1_CHAN_QUARTER_RATE 0x00000002
|
|
#define REGDMN_CAP1_CHAN_HAL49GHZ 0x00000004
|
|
|
|
/* regulatory capabilities */
|
|
#define REGDMN_EEPROM_EEREGCAP_EN_FCC_MIDBAND 0x0040
|
|
#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_EVEN 0x0080
|
|
#define REGDMN_EEPROM_EEREGCAP_EN_KK_U2 0x0100
|
|
#define REGDMN_EEPROM_EEREGCAP_EN_KK_MIDBAND 0x0200
|
|
#define REGDMN_EEPROM_EEREGCAP_EN_KK_U1_ODD 0x0400
|
|
#define REGDMN_EEPROM_EEREGCAP_EN_KK_NEW_11A 0x0800
|
|
|
|
struct hal_reg_capabilities {
|
|
/* regdomain value specified in EEPROM */
|
|
__le32 eeprom_rd;
|
|
/*regdomain */
|
|
__le32 eeprom_rd_ext;
|
|
/* CAP1 capabilities bit map. */
|
|
__le32 regcap1;
|
|
/* REGDMN EEPROM CAP. */
|
|
__le32 regcap2;
|
|
/* REGDMN MODE */
|
|
__le32 wireless_modes;
|
|
__le32 low_2ghz_chan;
|
|
__le32 high_2ghz_chan;
|
|
__le32 low_5ghz_chan;
|
|
__le32 high_5ghz_chan;
|
|
} __packed;
|
|
|
|
enum wlan_mode_capability {
|
|
WHAL_WLAN_11A_CAPABILITY = 0x1,
|
|
WHAL_WLAN_11G_CAPABILITY = 0x2,
|
|
WHAL_WLAN_11AG_CAPABILITY = 0x3,
|
|
};
|
|
|
|
/* structure used by FW for requesting host memory */
|
|
struct wlan_host_mem_req {
|
|
/* ID of the request */
|
|
__le32 req_id;
|
|
/* size of the of each unit */
|
|
__le32 unit_size;
|
|
/* flags to indicate that
|
|
* the number units is dependent
|
|
* on number of resources(num vdevs num peers .. etc)
|
|
*/
|
|
__le32 num_unit_info;
|
|
/*
|
|
* actual number of units to allocate . if flags in the num_unit_info
|
|
* indicate that number of units is tied to number of a particular
|
|
* resource to allocate then num_units filed is set to 0 and host
|
|
* will derive the number units from number of the resources it is
|
|
* requesting.
|
|
*/
|
|
__le32 num_units;
|
|
} __packed;
|
|
|
|
/*
|
|
* The following struct holds optional payload for
|
|
* wmi_service_ready_event,e.g., 11ac pass some of the
|
|
* device capability to the host.
|
|
*/
|
|
struct wmi_service_ready_event {
|
|
__le32 sw_version;
|
|
__le32 sw_version_1;
|
|
__le32 abi_version;
|
|
/* WMI_PHY_CAPABILITY */
|
|
__le32 phy_capability;
|
|
/* Maximum number of frag table entries that SW will populate less 1 */
|
|
__le32 max_frag_entry;
|
|
__le32 wmi_service_bitmap[16];
|
|
__le32 num_rf_chains;
|
|
/*
|
|
* The following field is only valid for service type
|
|
* WMI_SERVICE_11AC
|
|
*/
|
|
__le32 ht_cap_info; /* WMI HT Capability */
|
|
__le32 vht_cap_info; /* VHT capability info field of 802.11ac */
|
|
__le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
|
|
__le32 hw_min_tx_power;
|
|
__le32 hw_max_tx_power;
|
|
struct hal_reg_capabilities hal_reg_capabilities;
|
|
__le32 sys_cap_info;
|
|
__le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
|
|
/*
|
|
* Max beacon and Probe Response IE offload size
|
|
* (includes optional P2P IEs)
|
|
*/
|
|
__le32 max_bcn_ie_size;
|
|
/*
|
|
* request to host to allocate a chuck of memory and pss it down to FW
|
|
* via WM_INIT. FW uses this as FW extesnsion memory for saving its
|
|
* data structures. Only valid for low latency interfaces like PCIE
|
|
* where FW can access this memory directly (or) by DMA.
|
|
*/
|
|
__le32 num_mem_reqs;
|
|
struct wlan_host_mem_req mem_reqs[0];
|
|
} __packed;
|
|
|
|
/* This is the definition from 10.X firmware branch */
|
|
struct wmi_10x_service_ready_event {
|
|
__le32 sw_version;
|
|
__le32 abi_version;
|
|
|
|
/* WMI_PHY_CAPABILITY */
|
|
__le32 phy_capability;
|
|
|
|
/* Maximum number of frag table entries that SW will populate less 1 */
|
|
__le32 max_frag_entry;
|
|
__le32 wmi_service_bitmap[16];
|
|
__le32 num_rf_chains;
|
|
|
|
/*
|
|
* The following field is only valid for service type
|
|
* WMI_SERVICE_11AC
|
|
*/
|
|
__le32 ht_cap_info; /* WMI HT Capability */
|
|
__le32 vht_cap_info; /* VHT capability info field of 802.11ac */
|
|
__le32 vht_supp_mcs; /* VHT Supported MCS Set field Rx/Tx same */
|
|
__le32 hw_min_tx_power;
|
|
__le32 hw_max_tx_power;
|
|
|
|
struct hal_reg_capabilities hal_reg_capabilities;
|
|
|
|
__le32 sys_cap_info;
|
|
__le32 min_pkt_size_enable; /* Enterprise mode short pkt enable */
|
|
|
|
/*
|
|
* request to host to allocate a chuck of memory and pss it down to FW
|
|
* via WM_INIT. FW uses this as FW extesnsion memory for saving its
|
|
* data structures. Only valid for low latency interfaces like PCIE
|
|
* where FW can access this memory directly (or) by DMA.
|
|
*/
|
|
__le32 num_mem_reqs;
|
|
|
|
struct wlan_host_mem_req mem_reqs[0];
|
|
} __packed;
|
|
|
|
#define WMI_SERVICE_READY_TIMEOUT_HZ (5 * HZ)
|
|
#define WMI_UNIFIED_READY_TIMEOUT_HZ (5 * HZ)
|
|
|
|
struct wmi_ready_event {
|
|
__le32 sw_version;
|
|
__le32 abi_version;
|
|
struct wmi_mac_addr mac_addr;
|
|
__le32 status;
|
|
} __packed;
|
|
|
|
struct wmi_resource_config {
|
|
/* number of virtual devices (VAPs) to support */
|
|
__le32 num_vdevs;
|
|
|
|
/* number of peer nodes to support */
|
|
__le32 num_peers;
|
|
|
|
/*
|
|
* In offload mode target supports features like WOW, chatter and
|
|
* other protocol offloads. In order to support them some
|
|
* functionalities like reorder buffering, PN checking need to be
|
|
* done in target. This determines maximum number of peers supported
|
|
* by target in offload mode
|
|
*/
|
|
__le32 num_offload_peers;
|
|
|
|
/* For target-based RX reordering */
|
|
__le32 num_offload_reorder_bufs;
|
|
|
|
/* number of keys per peer */
|
|
__le32 num_peer_keys;
|
|
|
|
/* total number of TX/RX data TIDs */
|
|
__le32 num_tids;
|
|
|
|
/*
|
|
* max skid for resolving hash collisions
|
|
*
|
|
* The address search table is sparse, so that if two MAC addresses
|
|
* result in the same hash value, the second of these conflicting
|
|
* entries can slide to the next index in the address search table,
|
|
* and use it, if it is unoccupied. This ast_skid_limit parameter
|
|
* specifies the upper bound on how many subsequent indices to search
|
|
* over to find an unoccupied space.
|
|
*/
|
|
__le32 ast_skid_limit;
|
|
|
|
/*
|
|
* the nominal chain mask for transmit
|
|
*
|
|
* The chain mask may be modified dynamically, e.g. to operate AP
|
|
* tx with a reduced number of chains if no clients are associated.
|
|
* This configuration parameter specifies the nominal chain-mask that
|
|
* should be used when not operating with a reduced set of tx chains.
|
|
*/
|
|
__le32 tx_chain_mask;
|
|
|
|
/*
|
|
* the nominal chain mask for receive
|
|
*
|
|
* The chain mask may be modified dynamically, e.g. for a client
|
|
* to use a reduced number of chains for receive if the traffic to
|
|
* the client is low enough that it doesn't require downlink MIMO
|
|
* or antenna diversity.
|
|
* This configuration parameter specifies the nominal chain-mask that
|
|
* should be used when not operating with a reduced set of rx chains.
|
|
*/
|
|
__le32 rx_chain_mask;
|
|
|
|
/*
|
|
* what rx reorder timeout (ms) to use for the AC
|
|
*
|
|
* Each WMM access class (voice, video, best-effort, background) will
|
|
* have its own timeout value to dictate how long to wait for missing
|
|
* rx MPDUs to arrive before flushing subsequent MPDUs that have
|
|
* already been received.
|
|
* This parameter specifies the timeout in milliseconds for each
|
|
* class.
|
|
*/
|
|
__le32 rx_timeout_pri_vi;
|
|
__le32 rx_timeout_pri_vo;
|
|
__le32 rx_timeout_pri_be;
|
|
__le32 rx_timeout_pri_bk;
|
|
|
|
/*
|
|
* what mode the rx should decap packets to
|
|
*
|
|
* MAC can decap to RAW (no decap), native wifi or Ethernet types
|
|
* THis setting also determines the default TX behavior, however TX
|
|
* behavior can be modified on a per VAP basis during VAP init
|
|
*/
|
|
__le32 rx_decap_mode;
|
|
|
|
/* what is the maximum number of scan requests that can be queued */
|
|
__le32 scan_max_pending_reqs;
|
|
|
|
/* maximum VDEV that could use BMISS offload */
|
|
__le32 bmiss_offload_max_vdev;
|
|
|
|
/* maximum VDEV that could use offload roaming */
|
|
__le32 roam_offload_max_vdev;
|
|
|
|
/* maximum AP profiles that would push to offload roaming */
|
|
__le32 roam_offload_max_ap_profiles;
|
|
|
|
/*
|
|
* how many groups to use for mcast->ucast conversion
|
|
*
|
|
* The target's WAL maintains a table to hold information regarding
|
|
* which peers belong to a given multicast group, so that if
|
|
* multicast->unicast conversion is enabled, the target can convert
|
|
* multicast tx frames to a series of unicast tx frames, to each
|
|
* peer within the multicast group.
|
|
This num_mcast_groups configuration parameter tells the target how
|
|
* many multicast groups to provide storage for within its multicast
|
|
* group membership table.
|
|
*/
|
|
__le32 num_mcast_groups;
|
|
|
|
/*
|
|
* size to alloc for the mcast membership table
|
|
*
|
|
* This num_mcast_table_elems configuration parameter tells the
|
|
* target how many peer elements it needs to provide storage for in
|
|
* its multicast group membership table.
|
|
* These multicast group membership table elements are shared by the
|
|
* multicast groups stored within the table.
|
|
*/
|
|
__le32 num_mcast_table_elems;
|
|
|
|
/*
|
|
* whether/how to do multicast->unicast conversion
|
|
*
|
|
* This configuration parameter specifies whether the target should
|
|
* perform multicast --> unicast conversion on transmit, and if so,
|
|
* what to do if it finds no entries in its multicast group
|
|
* membership table for the multicast IP address in the tx frame.
|
|
* Configuration value:
|
|
* 0 -> Do not perform multicast to unicast conversion.
|
|
* 1 -> Convert multicast frames to unicast, if the IP multicast
|
|
* address from the tx frame is found in the multicast group
|
|
* membership table. If the IP multicast address is not found,
|
|
* drop the frame.
|
|
* 2 -> Convert multicast frames to unicast, if the IP multicast
|
|
* address from the tx frame is found in the multicast group
|
|
* membership table. If the IP multicast address is not found,
|
|
* transmit the frame as multicast.
|
|
*/
|
|
__le32 mcast2ucast_mode;
|
|
|
|
/*
|
|
* how much memory to allocate for a tx PPDU dbg log
|
|
*
|
|
* This parameter controls how much memory the target will allocate
|
|
* to store a log of tx PPDU meta-information (how large the PPDU
|
|
* was, when it was sent, whether it was successful, etc.)
|
|
*/
|
|
__le32 tx_dbg_log_size;
|
|
|
|
/* how many AST entries to be allocated for WDS */
|
|
__le32 num_wds_entries;
|
|
|
|
/*
|
|
* MAC DMA burst size, e.g., For target PCI limit can be
|
|
* 0 -default, 1 256B
|
|
*/
|
|
__le32 dma_burst_size;
|
|
|
|
/*
|
|
* Fixed delimiters to be inserted after every MPDU to
|
|
* account for interface latency to avoid underrun.
|
|
*/
|
|
__le32 mac_aggr_delim;
|
|
|
|
/*
|
|
* determine whether target is responsible for detecting duplicate
|
|
* non-aggregate MPDU and timing out stale fragments.
|
|
*
|
|
* A-MPDU reordering is always performed on the target.
|
|
*
|
|
* 0: target responsible for frag timeout and dup checking
|
|
* 1: host responsible for frag timeout and dup checking
|
|
*/
|
|
__le32 rx_skip_defrag_timeout_dup_detection_check;
|
|
|
|
/*
|
|
* Configuration for VoW :
|
|
* No of Video Nodes to be supported
|
|
* and Max no of descriptors for each Video link (node).
|
|
*/
|
|
__le32 vow_config;
|
|
|
|
/* maximum VDEV that could use GTK offload */
|
|
__le32 gtk_offload_max_vdev;
|
|
|
|
/* Number of msdu descriptors target should use */
|
|
__le32 num_msdu_desc;
|
|
|
|
/*
|
|
* Max. number of Tx fragments per MSDU
|
|
* This parameter controls the max number of Tx fragments per MSDU.
|
|
* This is sent by the target as part of the WMI_SERVICE_READY event
|
|
* and is overridden by the OS shim as required.
|
|
*/
|
|
__le32 max_frag_entries;
|
|
} __packed;
|
|
|
|
struct wmi_resource_config_10x {
|
|
/* number of virtual devices (VAPs) to support */
|
|
__le32 num_vdevs;
|
|
|
|
/* number of peer nodes to support */
|
|
__le32 num_peers;
|
|
|
|
/* number of keys per peer */
|
|
__le32 num_peer_keys;
|
|
|
|
/* total number of TX/RX data TIDs */
|
|
__le32 num_tids;
|
|
|
|
/*
|
|
* max skid for resolving hash collisions
|
|
*
|
|
* The address search table is sparse, so that if two MAC addresses
|
|
* result in the same hash value, the second of these conflicting
|
|
* entries can slide to the next index in the address search table,
|
|
* and use it, if it is unoccupied. This ast_skid_limit parameter
|
|
* specifies the upper bound on how many subsequent indices to search
|
|
* over to find an unoccupied space.
|
|
*/
|
|
__le32 ast_skid_limit;
|
|
|
|
/*
|
|
* the nominal chain mask for transmit
|
|
*
|
|
* The chain mask may be modified dynamically, e.g. to operate AP
|
|
* tx with a reduced number of chains if no clients are associated.
|
|
* This configuration parameter specifies the nominal chain-mask that
|
|
* should be used when not operating with a reduced set of tx chains.
|
|
*/
|
|
__le32 tx_chain_mask;
|
|
|
|
/*
|
|
* the nominal chain mask for receive
|
|
*
|
|
* The chain mask may be modified dynamically, e.g. for a client
|
|
* to use a reduced number of chains for receive if the traffic to
|
|
* the client is low enough that it doesn't require downlink MIMO
|
|
* or antenna diversity.
|
|
* This configuration parameter specifies the nominal chain-mask that
|
|
* should be used when not operating with a reduced set of rx chains.
|
|
*/
|
|
__le32 rx_chain_mask;
|
|
|
|
/*
|
|
* what rx reorder timeout (ms) to use for the AC
|
|
*
|
|
* Each WMM access class (voice, video, best-effort, background) will
|
|
* have its own timeout value to dictate how long to wait for missing
|
|
* rx MPDUs to arrive before flushing subsequent MPDUs that have
|
|
* already been received.
|
|
* This parameter specifies the timeout in milliseconds for each
|
|
* class.
|
|
*/
|
|
__le32 rx_timeout_pri_vi;
|
|
__le32 rx_timeout_pri_vo;
|
|
__le32 rx_timeout_pri_be;
|
|
__le32 rx_timeout_pri_bk;
|
|
|
|
/*
|
|
* what mode the rx should decap packets to
|
|
*
|
|
* MAC can decap to RAW (no decap), native wifi or Ethernet types
|
|
* THis setting also determines the default TX behavior, however TX
|
|
* behavior can be modified on a per VAP basis during VAP init
|
|
*/
|
|
__le32 rx_decap_mode;
|
|
|
|
/* what is the maximum number of scan requests that can be queued */
|
|
__le32 scan_max_pending_reqs;
|
|
|
|
/* maximum VDEV that could use BMISS offload */
|
|
__le32 bmiss_offload_max_vdev;
|
|
|
|
/* maximum VDEV that could use offload roaming */
|
|
__le32 roam_offload_max_vdev;
|
|
|
|
/* maximum AP profiles that would push to offload roaming */
|
|
__le32 roam_offload_max_ap_profiles;
|
|
|
|
/*
|
|
* how many groups to use for mcast->ucast conversion
|
|
*
|
|
* The target's WAL maintains a table to hold information regarding
|
|
* which peers belong to a given multicast group, so that if
|
|
* multicast->unicast conversion is enabled, the target can convert
|
|
* multicast tx frames to a series of unicast tx frames, to each
|
|
* peer within the multicast group.
|
|
This num_mcast_groups configuration parameter tells the target how
|
|
* many multicast groups to provide storage for within its multicast
|
|
* group membership table.
|
|
*/
|
|
__le32 num_mcast_groups;
|
|
|
|
/*
|
|
* size to alloc for the mcast membership table
|
|
*
|
|
* This num_mcast_table_elems configuration parameter tells the
|
|
* target how many peer elements it needs to provide storage for in
|
|
* its multicast group membership table.
|
|
* These multicast group membership table elements are shared by the
|
|
* multicast groups stored within the table.
|
|
*/
|
|
__le32 num_mcast_table_elems;
|
|
|
|
/*
|
|
* whether/how to do multicast->unicast conversion
|
|
*
|
|
* This configuration parameter specifies whether the target should
|
|
* perform multicast --> unicast conversion on transmit, and if so,
|
|
* what to do if it finds no entries in its multicast group
|
|
* membership table for the multicast IP address in the tx frame.
|
|
* Configuration value:
|
|
* 0 -> Do not perform multicast to unicast conversion.
|
|
* 1 -> Convert multicast frames to unicast, if the IP multicast
|
|
* address from the tx frame is found in the multicast group
|
|
* membership table. If the IP multicast address is not found,
|
|
* drop the frame.
|
|
* 2 -> Convert multicast frames to unicast, if the IP multicast
|
|
* address from the tx frame is found in the multicast group
|
|
* membership table. If the IP multicast address is not found,
|
|
* transmit the frame as multicast.
|
|
*/
|
|
__le32 mcast2ucast_mode;
|
|
|
|
/*
|
|
* how much memory to allocate for a tx PPDU dbg log
|
|
*
|
|
* This parameter controls how much memory the target will allocate
|
|
* to store a log of tx PPDU meta-information (how large the PPDU
|
|
* was, when it was sent, whether it was successful, etc.)
|
|
*/
|
|
__le32 tx_dbg_log_size;
|
|
|
|
/* how many AST entries to be allocated for WDS */
|
|
__le32 num_wds_entries;
|
|
|
|
/*
|
|
* MAC DMA burst size, e.g., For target PCI limit can be
|
|
* 0 -default, 1 256B
|
|
*/
|
|
__le32 dma_burst_size;
|
|
|
|
/*
|
|
* Fixed delimiters to be inserted after every MPDU to
|
|
* account for interface latency to avoid underrun.
|
|
*/
|
|
__le32 mac_aggr_delim;
|
|
|
|
/*
|
|
* determine whether target is responsible for detecting duplicate
|
|
* non-aggregate MPDU and timing out stale fragments.
|
|
*
|
|
* A-MPDU reordering is always performed on the target.
|
|
*
|
|
* 0: target responsible for frag timeout and dup checking
|
|
* 1: host responsible for frag timeout and dup checking
|
|
*/
|
|
__le32 rx_skip_defrag_timeout_dup_detection_check;
|
|
|
|
/*
|
|
* Configuration for VoW :
|
|
* No of Video Nodes to be supported
|
|
* and Max no of descriptors for each Video link (node).
|
|
*/
|
|
__le32 vow_config;
|
|
|
|
/* Number of msdu descriptors target should use */
|
|
__le32 num_msdu_desc;
|
|
|
|
/*
|
|
* Max. number of Tx fragments per MSDU
|
|
* This parameter controls the max number of Tx fragments per MSDU.
|
|
* This is sent by the target as part of the WMI_SERVICE_READY event
|
|
* and is overridden by the OS shim as required.
|
|
*/
|
|
__le32 max_frag_entries;
|
|
} __packed;
|
|
|
|
enum wmi_10_2_feature_mask {
|
|
WMI_10_2_RX_BATCH_MODE = BIT(0),
|
|
WMI_10_2_ATF_CONFIG = BIT(1),
|
|
WMI_10_2_COEX_GPIO = BIT(3),
|
|
WMI_10_2_BSS_CHAN_INFO = BIT(6),
|
|
WMI_10_2_PEER_STATS = BIT(7),
|
|
};
|
|
|
|
struct wmi_resource_config_10_2 {
|
|
struct wmi_resource_config_10x common;
|
|
__le32 max_peer_ext_stats;
|
|
__le32 smart_ant_cap; /* 0-disable, 1-enable */
|
|
__le32 bk_min_free;
|
|
__le32 be_min_free;
|
|
__le32 vi_min_free;
|
|
__le32 vo_min_free;
|
|
__le32 feature_mask;
|
|
} __packed;
|
|
|
|
#define NUM_UNITS_IS_NUM_VDEVS BIT(0)
|
|
#define NUM_UNITS_IS_NUM_PEERS BIT(1)
|
|
#define NUM_UNITS_IS_NUM_ACTIVE_PEERS BIT(2)
|
|
|
|
struct wmi_resource_config_10_4 {
|
|
/* Number of virtual devices (VAPs) to support */
|
|
__le32 num_vdevs;
|
|
|
|
/* Number of peer nodes to support */
|
|
__le32 num_peers;
|
|
|
|
/* Number of active peer nodes to support */
|
|
__le32 num_active_peers;
|
|
|
|
/* In offload mode, target supports features like WOW, chatter and other
|
|
* protocol offloads. In order to support them some functionalities like
|
|
* reorder buffering, PN checking need to be done in target.
|
|
* This determines maximum number of peers supported by target in
|
|
* offload mode.
|
|
*/
|
|
__le32 num_offload_peers;
|
|
|
|
/* Number of reorder buffers available for doing target based reorder
|
|
* Rx reorder buffering
|
|
*/
|
|
__le32 num_offload_reorder_buffs;
|
|
|
|
/* Number of keys per peer */
|
|
__le32 num_peer_keys;
|
|
|
|
/* Total number of TX/RX data TIDs */
|
|
__le32 num_tids;
|
|
|
|
/* Max skid for resolving hash collisions.
|
|
* The address search table is sparse, so that if two MAC addresses
|
|
* result in the same hash value, the second of these conflicting
|
|
* entries can slide to the next index in the address search table,
|
|
* and use it, if it is unoccupied. This ast_skid_limit parameter
|
|
* specifies the upper bound on how many subsequent indices to search
|
|
* over to find an unoccupied space.
|
|
*/
|
|
__le32 ast_skid_limit;
|
|
|
|
/* The nominal chain mask for transmit.
|
|
* The chain mask may be modified dynamically, e.g. to operate AP tx
|
|
* with a reduced number of chains if no clients are associated.
|
|
* This configuration parameter specifies the nominal chain-mask that
|
|
* should be used when not operating with a reduced set of tx chains.
|
|
*/
|
|
__le32 tx_chain_mask;
|
|
|
|
/* The nominal chain mask for receive.
|
|
* The chain mask may be modified dynamically, e.g. for a client to use
|
|
* a reduced number of chains for receive if the traffic to the client
|
|
* is low enough that it doesn't require downlink MIMO or antenna
|
|
* diversity. This configuration parameter specifies the nominal
|
|
* chain-mask that should be used when not operating with a reduced
|
|
* set of rx chains.
|
|
*/
|
|
__le32 rx_chain_mask;
|
|
|
|
/* What rx reorder timeout (ms) to use for the AC.
|
|
* Each WMM access class (voice, video, best-effort, background) will
|
|
* have its own timeout value to dictate how long to wait for missing
|
|
* rx MPDUs to arrive before flushing subsequent MPDUs that have already
|
|
* been received. This parameter specifies the timeout in milliseconds
|
|
* for each class.
|
|
*/
|
|
__le32 rx_timeout_pri[4];
|
|
|
|
/* What mode the rx should decap packets to.
|
|
* MAC can decap to RAW (no decap), native wifi or Ethernet types.
|
|
* This setting also determines the default TX behavior, however TX
|
|
* behavior can be modified on a per VAP basis during VAP init
|
|
*/
|
|
__le32 rx_decap_mode;
|
|
|
|
__le32 scan_max_pending_req;
|
|
|
|
__le32 bmiss_offload_max_vdev;
|
|
|
|
__le32 roam_offload_max_vdev;
|
|
|
|
__le32 roam_offload_max_ap_profiles;
|
|
|
|
/* How many groups to use for mcast->ucast conversion.
|
|
* The target's WAL maintains a table to hold information regarding
|
|
* which peers belong to a given multicast group, so that if
|
|
* multicast->unicast conversion is enabled, the target can convert
|
|
* multicast tx frames to a series of unicast tx frames, to each peer
|
|
* within the multicast group. This num_mcast_groups configuration
|
|
* parameter tells the target how many multicast groups to provide
|
|
* storage for within its multicast group membership table.
|
|
*/
|
|
__le32 num_mcast_groups;
|
|
|
|
/* Size to alloc for the mcast membership table.
|
|
* This num_mcast_table_elems configuration parameter tells the target
|
|
* how many peer elements it needs to provide storage for in its
|
|
* multicast group membership table. These multicast group membership
|
|
* table elements are shared by the multicast groups stored within
|
|
* the table.
|
|
*/
|
|
__le32 num_mcast_table_elems;
|
|
|
|
/* Whether/how to do multicast->unicast conversion.
|
|
* This configuration parameter specifies whether the target should
|
|
* perform multicast --> unicast conversion on transmit, and if so,
|
|
* what to do if it finds no entries in its multicast group membership
|
|
* table for the multicast IP address in the tx frame.
|
|
* Configuration value:
|
|
* 0 -> Do not perform multicast to unicast conversion.
|
|
* 1 -> Convert multicast frames to unicast, if the IP multicast address
|
|
* from the tx frame is found in the multicast group membership
|
|
* table. If the IP multicast address is not found, drop the frame
|
|
* 2 -> Convert multicast frames to unicast, if the IP multicast address
|
|
* from the tx frame is found in the multicast group membership
|
|
* table. If the IP multicast address is not found, transmit the
|
|
* frame as multicast.
|
|
*/
|
|
__le32 mcast2ucast_mode;
|
|
|
|
/* How much memory to allocate for a tx PPDU dbg log.
|
|
* This parameter controls how much memory the target will allocate to
|
|
* store a log of tx PPDU meta-information (how large the PPDU was,
|
|
* when it was sent, whether it was successful, etc.)
|
|
*/
|
|
__le32 tx_dbg_log_size;
|
|
|
|
/* How many AST entries to be allocated for WDS */
|
|
__le32 num_wds_entries;
|
|
|
|
/* MAC DMA burst size. 0 -default, 1 -256B */
|
|
__le32 dma_burst_size;
|
|
|
|
/* Fixed delimiters to be inserted after every MPDU to account for
|
|
* interface latency to avoid underrun.
|
|
*/
|
|
__le32 mac_aggr_delim;
|
|
|
|
/* Determine whether target is responsible for detecting duplicate
|
|
* non-aggregate MPDU and timing out stale fragments. A-MPDU reordering
|
|
* is always performed on the target.
|
|
*
|
|
* 0: target responsible for frag timeout and dup checking
|
|
* 1: host responsible for frag timeout and dup checking
|
|
*/
|
|
__le32 rx_skip_defrag_timeout_dup_detection_check;
|
|
|
|
/* Configuration for VoW : No of Video nodes to be supported and max
|
|
* no of descriptors for each video link (node).
|
|
*/
|
|
__le32 vow_config;
|
|
|
|
/* Maximum vdev that could use gtk offload */
|
|
__le32 gtk_offload_max_vdev;
|
|
|
|
/* Number of msdu descriptors target should use */
|
|
__le32 num_msdu_desc;
|
|
|
|
/* Max number of tx fragments per MSDU.
|
|
* This parameter controls the max number of tx fragments per MSDU.
|
|
* This will passed by target as part of the WMI_SERVICE_READY event
|
|
* and is overridden by the OS shim as required.
|
|
*/
|
|
__le32 max_frag_entries;
|
|
|
|
/* Max number of extended peer stats.
|
|
* This parameter controls the max number of peers for which extended
|
|
* statistics are supported by target
|
|
*/
|
|
__le32 max_peer_ext_stats;
|
|
|
|
/* Smart antenna capabilities information.
|
|
* 1 - Smart antenna is enabled
|
|
* 0 - Smart antenna is disabled
|
|
* In future this can contain smart antenna specific capabilities.
|
|
*/
|
|
__le32 smart_ant_cap;
|
|
|
|
/* User can configure the buffers allocated for each AC (BE, BK, VI, VO)
|
|
* during init.
|
|
*/
|
|
__le32 bk_minfree;
|
|
__le32 be_minfree;
|
|
__le32 vi_minfree;
|
|
__le32 vo_minfree;
|
|
|
|
/* Rx batch mode capability.
|
|
* 1 - Rx batch mode enabled
|
|
* 0 - Rx batch mode disabled
|
|
*/
|
|
__le32 rx_batchmode;
|
|
|
|
/* Thermal throttling capability.
|
|
* 1 - Capable of thermal throttling
|
|
* 0 - Not capable of thermal throttling
|
|
*/
|
|
__le32 tt_support;
|
|
|
|
/* ATF configuration.
|
|
* 1 - Enable ATF
|
|
* 0 - Disable ATF
|
|
*/
|
|
__le32 atf_config;
|
|
|
|
/* Configure padding to manage IP header un-alignment
|
|
* 1 - Enable padding
|
|
* 0 - Disable padding
|
|
*/
|
|
__le32 iphdr_pad_config;
|
|
|
|
/* qwrap configuration (bits 15-0)
|
|
* 1 - This is qwrap configuration
|
|
* 0 - This is not qwrap
|
|
*
|
|
* Bits 31-16 is alloc_frag_desc_for_data_pkt (1 enables, 0 disables)
|
|
* In order to get ack-RSSI reporting and to specify the tx-rate for
|
|
* individual frames, this option must be enabled. This uses an extra
|
|
* 4 bytes per tx-msdu descriptor, so don't enable it unless you need it.
|
|
*/
|
|
__le32 qwrap_config;
|
|
} __packed;
|
|
|
|
enum wmi_coex_version {
|
|
WMI_NO_COEX_VERSION_SUPPORT = 0,
|
|
/* 3 wire coex support*/
|
|
WMI_COEX_VERSION_1 = 1,
|
|
/* 2.5 wire coex support*/
|
|
WMI_COEX_VERSION_2 = 2,
|
|
/* 2.5 wire coex with duty cycle support */
|
|
WMI_COEX_VERSION_3 = 3,
|
|
/* 4 wire coex support*/
|
|
WMI_COEX_VERSION_4 = 4,
|
|
};
|
|
|
|
/**
|
|
* enum wmi_10_4_feature_mask - WMI 10.4 feature enable/disable flags
|
|
* @WMI_10_4_LTEU_SUPPORT: LTEU config
|
|
* @WMI_10_4_COEX_GPIO_SUPPORT: COEX GPIO config
|
|
* @WMI_10_4_AUX_RADIO_SPECTRAL_INTF: AUX Radio Enhancement for spectral scan
|
|
* @WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF: AUX Radio Enhancement for chan load scan
|
|
* @WMI_10_4_BSS_CHANNEL_INFO_64: BSS channel info stats
|
|
* @WMI_10_4_PEER_STATS: Per station stats
|
|
* @WMI_10_4_VDEV_STATS: Per vdev stats
|
|
* @WMI_10_4_TDLS: Implicit TDLS support in firmware enable/disable
|
|
* @WMI_10_4_TDLS_OFFCHAN: TDLS offchannel support enable/disable
|
|
* @WMI_10_4_TDLS_UAPSD_BUFFER_STA: TDLS buffer sta support enable/disable
|
|
* @WMI_10_4_TDLS_UAPSD_SLEEP_STA: TDLS sleep sta support enable/disable
|
|
* @WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE: TDLS connection tracker in host
|
|
* enable/disable
|
|
* @WMI_10_4_TDLS_EXPLICIT_MODE_ONLY:Explicit TDLS mode enable/disable
|
|
* @WMI_10_4_TX_DATA_ACK_RSSI: Enable DATA ACK RSSI if firmware is capable
|
|
*/
|
|
enum wmi_10_4_feature_mask {
|
|
WMI_10_4_LTEU_SUPPORT = BIT(0),
|
|
WMI_10_4_COEX_GPIO_SUPPORT = BIT(1),
|
|
WMI_10_4_AUX_RADIO_SPECTRAL_INTF = BIT(2),
|
|
WMI_10_4_AUX_RADIO_CHAN_LOAD_INTF = BIT(3),
|
|
WMI_10_4_BSS_CHANNEL_INFO_64 = BIT(4),
|
|
WMI_10_4_PEER_STATS = BIT(5),
|
|
WMI_10_4_VDEV_STATS = BIT(6),
|
|
WMI_10_4_TDLS = BIT(7),
|
|
WMI_10_4_TDLS_OFFCHAN = BIT(8),
|
|
WMI_10_4_TDLS_UAPSD_BUFFER_STA = BIT(9),
|
|
WMI_10_4_TDLS_UAPSD_SLEEP_STA = BIT(10),
|
|
WMI_10_4_TDLS_CONN_TRACKER_IN_HOST_MODE = BIT(11),
|
|
WMI_10_4_TDLS_EXPLICIT_MODE_ONLY = BIT(12),
|
|
WMI_10_4_TX_DATA_ACK_RSSI = BIT(16),
|
|
WMI_10_4_EXT_PEER_TID_CONFIGS_SUPPORT = BIT(17),
|
|
WMI_10_4_REPORT_AIRTIME = BIT(18),
|
|
|
|
};
|
|
|
|
struct wmi_ext_resource_config_10_4_cmd {
|
|
/* contains enum wmi_host_platform_type */
|
|
__le32 host_platform_config;
|
|
/* see enum wmi_10_4_feature_mask */
|
|
__le32 fw_feature_bitmap;
|
|
/* WLAN priority GPIO number */
|
|
__le32 wlan_gpio_priority;
|
|
/* see enum wmi_coex_version */
|
|
__le32 coex_version;
|
|
/* COEX GPIO config */
|
|
__le32 coex_gpio_pin1;
|
|
__le32 coex_gpio_pin2;
|
|
__le32 coex_gpio_pin3;
|
|
/* number of vdevs allowed to perform tdls */
|
|
__le32 num_tdls_vdevs;
|
|
/* number of peers to track per TDLS vdev */
|
|
__le32 num_tdls_conn_table_entries;
|
|
/* number of tdls sleep sta supported */
|
|
__le32 max_tdls_concurrent_sleep_sta;
|
|
/* number of tdls buffer sta supported */
|
|
__le32 max_tdls_concurrent_buffer_sta;
|
|
};
|
|
|
|
/* structure describing host memory chunk. */
|
|
struct host_memory_chunk {
|
|
/* id of the request that is passed up in service ready */
|
|
__le32 req_id;
|
|
/* the physical address the memory chunk */
|
|
__le32 ptr;
|
|
/* size of the chunk */
|
|
__le32 size;
|
|
} __packed;
|
|
|
|
struct wmi_host_mem_chunks {
|
|
__le32 count;
|
|
/* some fw revisions require at least 1 chunk regardless of count */
|
|
struct host_memory_chunk items[1];
|
|
} __packed;
|
|
|
|
struct wmi_init_cmd {
|
|
struct wmi_resource_config resource_config;
|
|
struct wmi_host_mem_chunks mem_chunks;
|
|
} __packed;
|
|
|
|
/* _10x structure is from 10.X FW API */
|
|
struct wmi_init_cmd_10x {
|
|
struct wmi_resource_config_10x resource_config;
|
|
struct wmi_host_mem_chunks mem_chunks;
|
|
} __packed;
|
|
|
|
struct wmi_init_cmd_10_2 {
|
|
struct wmi_resource_config_10_2 resource_config;
|
|
struct wmi_host_mem_chunks mem_chunks;
|
|
} __packed;
|
|
|
|
struct wmi_init_cmd_10_4 {
|
|
struct wmi_resource_config_10_4 resource_config;
|
|
struct wmi_host_mem_chunks mem_chunks;
|
|
} __packed;
|
|
|
|
struct wmi_chan_list_entry {
|
|
__le16 freq;
|
|
u8 phy_mode; /* valid for 10.2 only */
|
|
u8 reserved;
|
|
} __packed;
|
|
|
|
/* TLV for channel list */
|
|
struct wmi_chan_list {
|
|
__le32 tag; /* WMI_CHAN_LIST_TAG */
|
|
__le32 num_chan;
|
|
struct wmi_chan_list_entry channel_list[0];
|
|
} __packed;
|
|
|
|
struct wmi_bssid_list {
|
|
__le32 tag; /* WMI_BSSID_LIST_TAG */
|
|
__le32 num_bssid;
|
|
struct wmi_mac_addr bssid_list[0];
|
|
} __packed;
|
|
|
|
struct wmi_ie_data {
|
|
__le32 tag; /* WMI_IE_TAG */
|
|
__le32 ie_len;
|
|
u8 ie_data[0];
|
|
} __packed;
|
|
|
|
struct wmi_ssid {
|
|
__le32 ssid_len;
|
|
u8 ssid[32];
|
|
} __packed;
|
|
|
|
struct wmi_ssid_list {
|
|
__le32 tag; /* WMI_SSID_LIST_TAG */
|
|
__le32 num_ssids;
|
|
struct wmi_ssid ssids[0];
|
|
} __packed;
|
|
|
|
/* prefix used by scan requestor ids on the host */
|
|
#define WMI_HOST_SCAN_REQUESTOR_ID_PREFIX 0xA000
|
|
|
|
/* prefix used by scan request ids generated on the host */
|
|
/* host cycles through the lower 12 bits to generate ids */
|
|
#define WMI_HOST_SCAN_REQ_ID_PREFIX 0xA000
|
|
|
|
#define WLAN_SCAN_PARAMS_MAX_SSID 16
|
|
#define WLAN_SCAN_PARAMS_MAX_BSSID 4
|
|
#define WLAN_SCAN_PARAMS_MAX_IE_LEN 256
|
|
|
|
/* Values lower than this may be refused by some firmware revisions with a scan
|
|
* completion with a timedout reason.
|
|
*/
|
|
#define WMI_SCAN_CHAN_MIN_TIME_MSEC 40
|
|
|
|
/* Scan priority numbers must be sequential, starting with 0 */
|
|
enum wmi_scan_priority {
|
|
WMI_SCAN_PRIORITY_VERY_LOW = 0,
|
|
WMI_SCAN_PRIORITY_LOW,
|
|
WMI_SCAN_PRIORITY_MEDIUM,
|
|
WMI_SCAN_PRIORITY_HIGH,
|
|
WMI_SCAN_PRIORITY_VERY_HIGH,
|
|
WMI_SCAN_PRIORITY_COUNT /* number of priorities supported */
|
|
};
|
|
|
|
struct wmi_start_scan_common {
|
|
/* Scan ID */
|
|
__le32 scan_id;
|
|
/* Scan requestor ID */
|
|
__le32 scan_req_id;
|
|
/* VDEV id(interface) that is requesting scan */
|
|
__le32 vdev_id;
|
|
/* Scan Priority, input to scan scheduler */
|
|
__le32 scan_priority;
|
|
/* Scan events subscription */
|
|
__le32 notify_scan_events;
|
|
/* dwell time in msec on active channels */
|
|
__le32 dwell_time_active;
|
|
/* dwell time in msec on passive channels */
|
|
__le32 dwell_time_passive;
|
|
/*
|
|
* min time in msec on the BSS channel,only valid if atleast one
|
|
* VDEV is active
|
|
*/
|
|
__le32 min_rest_time;
|
|
/*
|
|
* max rest time in msec on the BSS channel,only valid if at least
|
|
* one VDEV is active
|
|
*/
|
|
/*
|
|
* the scanner will rest on the bss channel at least min_rest_time
|
|
* after min_rest_time the scanner will start checking for tx/rx
|
|
* activity on all VDEVs. if there is no activity the scanner will
|
|
* switch to off channel. if there is activity the scanner will let
|
|
* the radio on the bss channel until max_rest_time expires.at
|
|
* max_rest_time scanner will switch to off channel irrespective of
|
|
* activity. activity is determined by the idle_time parameter.
|
|
*/
|
|
__le32 max_rest_time;
|
|
/*
|
|
* time before sending next set of probe requests.
|
|
* The scanner keeps repeating probe requests transmission with
|
|
* period specified by repeat_probe_time.
|
|
* The number of probe requests specified depends on the ssid_list
|
|
* and bssid_list
|
|
*/
|
|
__le32 repeat_probe_time;
|
|
/* time in msec between 2 consequetive probe requests with in a set. */
|
|
__le32 probe_spacing_time;
|
|
/*
|
|
* data inactivity time in msec on bss channel that will be used by
|
|
* scanner for measuring the inactivity.
|
|
*/
|
|
__le32 idle_time;
|
|
/* maximum time in msec allowed for scan */
|
|
__le32 max_scan_time;
|
|
/*
|
|
* delay in msec before sending first probe request after switching
|
|
* to a channel
|
|
*/
|
|
__le32 probe_delay;
|
|
/* Scan control flags */
|
|
__le32 scan_ctrl_flags;
|
|
} __packed;
|
|
|
|
struct wmi_start_scan_tlvs {
|
|
/* TLV parameters. These includes channel list, ssid list, bssid list,
|
|
* extra ies.
|
|
*/
|
|
u8 tlvs[0];
|
|
} __packed;
|
|
|
|
struct wmi_start_scan_cmd {
|
|
struct wmi_start_scan_common common;
|
|
__le32 burst_duration_ms;
|
|
struct wmi_start_scan_tlvs tlvs;
|
|
} __packed;
|
|
|
|
/* This is the definition from 10.X firmware branch */
|
|
struct wmi_10x_start_scan_cmd {
|
|
struct wmi_start_scan_common common;
|
|
struct wmi_start_scan_tlvs tlvs;
|
|
} __packed;
|
|
|
|
struct wmi_ssid_arg {
|
|
int len;
|
|
const u8 *ssid;
|
|
};
|
|
|
|
struct wmi_bssid_arg {
|
|
const u8 *bssid;
|
|
};
|
|
|
|
struct wmi_start_scan_arg {
|
|
u32 scan_id;
|
|
u32 scan_req_id;
|
|
u32 vdev_id;
|
|
u32 scan_priority;
|
|
u32 notify_scan_events;
|
|
u32 dwell_time_active;
|
|
u32 dwell_time_passive;
|
|
u32 min_rest_time;
|
|
u32 max_rest_time;
|
|
u32 repeat_probe_time;
|
|
u32 probe_spacing_time;
|
|
u32 idle_time;
|
|
u32 max_scan_time;
|
|
u32 probe_delay;
|
|
u32 scan_ctrl_flags;
|
|
u32 burst_duration_ms;
|
|
|
|
u32 ie_len;
|
|
u32 n_channels;
|
|
u32 n_ssids;
|
|
u32 n_bssids;
|
|
|
|
u8 ie[WLAN_SCAN_PARAMS_MAX_IE_LEN];
|
|
u16 channels[64];
|
|
struct wmi_ssid_arg ssids[WLAN_SCAN_PARAMS_MAX_SSID];
|
|
struct wmi_bssid_arg bssids[WLAN_SCAN_PARAMS_MAX_BSSID];
|
|
struct wmi_mac_addr mac_addr;
|
|
struct wmi_mac_addr mac_mask;
|
|
};
|
|
|
|
/* scan control flags */
|
|
|
|
/* passively scan all channels including active channels */
|
|
#define WMI_SCAN_FLAG_PASSIVE 0x1
|
|
/* add wild card ssid probe request even though ssid_list is specified. */
|
|
#define WMI_SCAN_ADD_BCAST_PROBE_REQ 0x2
|
|
/* add cck rates to rates/xrate ie for the generated probe request */
|
|
#define WMI_SCAN_ADD_CCK_RATES 0x4
|
|
/* add ofdm rates to rates/xrate ie for the generated probe request */
|
|
#define WMI_SCAN_ADD_OFDM_RATES 0x8
|
|
/* To enable indication of Chan load and Noise floor to host */
|
|
#define WMI_SCAN_CHAN_STAT_EVENT 0x10
|
|
/* Filter Probe request frames */
|
|
#define WMI_SCAN_FILTER_PROBE_REQ 0x20
|
|
/* When set, DFS channels will not be scanned */
|
|
#define WMI_SCAN_BYPASS_DFS_CHN 0x40
|
|
/* Different FW scan engine may choose to bail out on errors.
|
|
* Allow the driver to have influence over that.
|
|
*/
|
|
#define WMI_SCAN_CONTINUE_ON_ERROR 0x80
|
|
|
|
/* Use random MAC address for TA for Probe Request frame and add
|
|
* OUI specified by WMI_SCAN_PROB_REQ_OUI_CMDID to the Probe Request frame.
|
|
* if OUI is not set by WMI_SCAN_PROB_REQ_OUI_CMDID then the flag is ignored.
|
|
*/
|
|
#define WMI_SCAN_ADD_SPOOFED_MAC_IN_PROBE_REQ 0x1000
|
|
|
|
/* WMI_SCAN_CLASS_MASK must be the same value as IEEE80211_SCAN_CLASS_MASK */
|
|
#define WMI_SCAN_CLASS_MASK 0xFF000000
|
|
|
|
enum wmi_stop_scan_type {
|
|
WMI_SCAN_STOP_ONE = 0x00000000, /* stop by scan_id */
|
|
WMI_SCAN_STOP_VDEV_ALL = 0x01000000, /* stop by vdev_id */
|
|
WMI_SCAN_STOP_ALL = 0x04000000, /* stop all scans */
|
|
};
|
|
|
|
struct wmi_stop_scan_cmd {
|
|
__le32 scan_req_id;
|
|
__le32 scan_id;
|
|
__le32 req_type;
|
|
__le32 vdev_id;
|
|
} __packed;
|
|
|
|
struct wmi_stop_scan_arg {
|
|
u32 req_id;
|
|
enum wmi_stop_scan_type req_type;
|
|
union {
|
|
u32 scan_id;
|
|
u32 vdev_id;
|
|
} u;
|
|
};
|
|
|
|
struct wmi_scan_chan_list_cmd {
|
|
__le32 num_scan_chans;
|
|
struct wmi_channel chan_info[0];
|
|
} __packed;
|
|
|
|
struct wmi_scan_chan_list_arg {
|
|
u32 n_channels;
|
|
struct wmi_channel_arg *channels;
|
|
};
|
|
|
|
enum wmi_bss_filter {
|
|
WMI_BSS_FILTER_NONE = 0, /* no beacons forwarded */
|
|
WMI_BSS_FILTER_ALL, /* all beacons forwarded */
|
|
WMI_BSS_FILTER_PROFILE, /* only beacons matching profile */
|
|
WMI_BSS_FILTER_ALL_BUT_PROFILE, /* all but beacons matching profile */
|
|
WMI_BSS_FILTER_CURRENT_BSS, /* only beacons matching current BSS */
|
|
WMI_BSS_FILTER_ALL_BUT_BSS, /* all but beacons matching BSS */
|
|
WMI_BSS_FILTER_PROBED_SSID, /* beacons matching probed ssid */
|
|
WMI_BSS_FILTER_LAST_BSS, /* marker only */
|
|
};
|
|
|
|
enum wmi_scan_event_type {
|
|
WMI_SCAN_EVENT_STARTED = BIT(0),
|
|
WMI_SCAN_EVENT_COMPLETED = BIT(1),
|
|
WMI_SCAN_EVENT_BSS_CHANNEL = BIT(2),
|
|
WMI_SCAN_EVENT_FOREIGN_CHANNEL = BIT(3),
|
|
WMI_SCAN_EVENT_DEQUEUED = BIT(4),
|
|
/* possibly by high-prio scan */
|
|
WMI_SCAN_EVENT_PREEMPTED = BIT(5),
|
|
WMI_SCAN_EVENT_START_FAILED = BIT(6),
|
|
WMI_SCAN_EVENT_RESTARTED = BIT(7),
|
|
WMI_SCAN_EVENT_FOREIGN_CHANNEL_EXIT = BIT(8),
|
|
WMI_SCAN_EVENT_MAX = BIT(15),
|
|
};
|
|
|
|
enum wmi_scan_completion_reason {
|
|
WMI_SCAN_REASON_COMPLETED,
|
|
WMI_SCAN_REASON_CANCELLED,
|
|
WMI_SCAN_REASON_PREEMPTED,
|
|
WMI_SCAN_REASON_TIMEDOUT,
|
|
WMI_SCAN_REASON_INTERNAL_FAILURE,
|
|
WMI_SCAN_REASON_MAX,
|
|
};
|
|
|
|
struct wmi_scan_event {
|
|
__le32 event_type; /* %WMI_SCAN_EVENT_ */
|
|
__le32 reason; /* %WMI_SCAN_REASON_ */
|
|
__le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
|
|
__le32 scan_req_id;
|
|
__le32 scan_id;
|
|
__le32 vdev_id;
|
|
} __packed;
|
|
|
|
/*
|
|
* This defines how much headroom is kept in the
|
|
* receive frame between the descriptor and the
|
|
* payload, in order for the WMI PHY error and
|
|
* management handler to insert header contents.
|
|
*
|
|
* This is in bytes.
|
|
*/
|
|
#define WMI_MGMT_RX_HDR_HEADROOM 52
|
|
|
|
/*
|
|
* This event will be used for sending scan results
|
|
* as well as rx mgmt frames to the host. The rx buffer
|
|
* will be sent as part of this WMI event. It would be a
|
|
* good idea to pass all the fields in the RX status
|
|
* descriptor up to the host.
|
|
*/
|
|
struct wmi_mgmt_rx_hdr_v1 {
|
|
__le32 channel;
|
|
__le32 snr;
|
|
__le32 rate;
|
|
__le32 phy_mode;
|
|
__le32 buf_len;
|
|
__le32 status; /* %WMI_RX_STATUS_ */
|
|
} __packed;
|
|
|
|
struct wmi_mgmt_rx_hdr_v2 {
|
|
struct wmi_mgmt_rx_hdr_v1 v1;
|
|
__le32 rssi_ctl[4];
|
|
} __packed;
|
|
|
|
struct wmi_mgmt_rx_event_v1 {
|
|
struct wmi_mgmt_rx_hdr_v1 hdr;
|
|
u8 buf[0];
|
|
} __packed;
|
|
|
|
struct wmi_mgmt_rx_event_v2 {
|
|
struct wmi_mgmt_rx_hdr_v2 hdr;
|
|
u8 buf[0];
|
|
} __packed;
|
|
|
|
struct wmi_10_4_mgmt_rx_hdr {
|
|
__le32 channel;
|
|
__le32 snr;
|
|
u8 rssi_ctl[4];
|
|
__le32 rate;
|
|
__le32 phy_mode;
|
|
__le32 buf_len;
|
|
__le32 status;
|
|
} __packed;
|
|
|
|
struct wmi_10_4_mgmt_rx_event {
|
|
struct wmi_10_4_mgmt_rx_hdr hdr;
|
|
u8 buf[0];
|
|
} __packed;
|
|
|
|
struct wmi_mgmt_rx_ext_info {
|
|
__le64 rx_mac_timestamp;
|
|
} __packed __aligned(4);
|
|
|
|
#define WMI_RX_STATUS_OK 0x00
|
|
#define WMI_RX_STATUS_ERR_CRC 0x01
|
|
#define WMI_RX_STATUS_ERR_DECRYPT 0x08
|
|
#define WMI_RX_STATUS_ERR_MIC 0x10
|
|
#define WMI_RX_STATUS_ERR_KEY_CACHE_MISS 0x20
|
|
/* Extension data at the end of mgmt frame */
|
|
#define WMI_RX_STATUS_EXT_INFO 0x40
|
|
|
|
#define PHY_ERROR_GEN_SPECTRAL_SCAN 0x26
|
|
#define PHY_ERROR_GEN_FALSE_RADAR_EXT 0x24
|
|
#define PHY_ERROR_GEN_RADAR 0x05
|
|
|
|
#define PHY_ERROR_10_4_RADAR_MASK 0x4
|
|
#define PHY_ERROR_10_4_SPECTRAL_SCAN_MASK 0x4000000
|
|
|
|
enum phy_err_type {
|
|
PHY_ERROR_UNKNOWN,
|
|
PHY_ERROR_SPECTRAL_SCAN,
|
|
PHY_ERROR_FALSE_RADAR_EXT,
|
|
PHY_ERROR_RADAR
|
|
};
|
|
|
|
struct wmi_phyerr {
|
|
__le32 tsf_timestamp;
|
|
__le16 freq1;
|
|
__le16 freq2;
|
|
u8 rssi_combined;
|
|
u8 chan_width_mhz;
|
|
u8 phy_err_code;
|
|
u8 rsvd0;
|
|
__le32 rssi_chains[4];
|
|
__le16 nf_chains[4];
|
|
__le32 buf_len;
|
|
u8 buf[0];
|
|
} __packed;
|
|
|
|
struct wmi_phyerr_event {
|
|
__le32 num_phyerrs;
|
|
__le32 tsf_l32;
|
|
__le32 tsf_u32;
|
|
struct wmi_phyerr phyerrs[0];
|
|
} __packed;
|
|
|
|
struct wmi_10_4_phyerr_event {
|
|
__le32 tsf_l32;
|
|
__le32 tsf_u32;
|
|
__le16 freq1;
|
|
__le16 freq2;
|
|
u8 rssi_combined;
|
|
u8 chan_width_mhz;
|
|
u8 phy_err_code;
|
|
u8 rsvd0;
|
|
__le32 rssi_chains[4];
|
|
__le16 nf_chains[4];
|
|
__le32 phy_err_mask[2];
|
|
__le32 tsf_timestamp;
|
|
__le32 buf_len;
|
|
u8 buf[0];
|
|
} __packed;
|
|
|
|
struct wmi_radar_found_info {
|
|
__le32 pri_min;
|
|
__le32 pri_max;
|
|
__le32 width_min;
|
|
__le32 width_max;
|
|
__le32 sidx_min;
|
|
__le32 sidx_max;
|
|
} __packed;
|
|
|
|
enum wmi_radar_confirmation_status {
|
|
/* Detected radar was due to SW pulses */
|
|
WMI_SW_RADAR_DETECTED = 0,
|
|
|
|
WMI_RADAR_DETECTION_FAIL = 1,
|
|
|
|
/* Real radar detected */
|
|
WMI_HW_RADAR_DETECTED = 2,
|
|
};
|
|
|
|
#define PHYERR_TLV_SIG 0xBB
|
|
#define PHYERR_TLV_TAG_SEARCH_FFT_REPORT 0xFB
|
|
#define PHYERR_TLV_TAG_RADAR_PULSE_SUMMARY 0xF8
|
|
#define PHYERR_TLV_TAG_SPECTRAL_SUMMARY_REPORT 0xF9
|
|
|
|
struct phyerr_radar_report {
|
|
__le32 reg0; /* RADAR_REPORT_REG0_* */
|
|
__le32 reg1; /* RADAR_REPORT_REG1_* */
|
|
} __packed;
|
|
|
|
#define RADAR_REPORT_REG0_PULSE_IS_CHIRP_MASK 0x80000000
|
|
#define RADAR_REPORT_REG0_PULSE_IS_CHIRP_LSB 31
|
|
|
|
#define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_MASK 0x40000000
|
|
#define RADAR_REPORT_REG0_PULSE_IS_MAX_WIDTH_LSB 30
|
|
|
|
#define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_MASK 0x3FF00000
|
|
#define RADAR_REPORT_REG0_AGC_TOTAL_GAIN_LSB 20
|
|
|
|
#define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_MASK 0x000F0000
|
|
#define RADAR_REPORT_REG0_PULSE_DELTA_DIFF_LSB 16
|
|
|
|
#define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_MASK 0x0000FC00
|
|
#define RADAR_REPORT_REG0_PULSE_DELTA_PEAK_LSB 10
|
|
|
|
#define RADAR_REPORT_REG0_PULSE_SIDX_MASK 0x000003FF
|
|
#define RADAR_REPORT_REG0_PULSE_SIDX_LSB 0
|
|
|
|
#define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_MASK 0x80000000
|
|
#define RADAR_REPORT_REG1_PULSE_SRCH_FFT_VALID_LSB 31
|
|
|
|
#define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_MASK 0x7F000000
|
|
#define RADAR_REPORT_REG1_PULSE_AGC_MB_GAIN_LSB 24
|
|
|
|
#define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_MASK 0x00FF0000
|
|
#define RADAR_REPORT_REG1_PULSE_SUBCHAN_MASK_LSB 16
|
|
|
|
#define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_MASK 0x0000FF00
|
|
#define RADAR_REPORT_REG1_PULSE_TSF_OFFSET_LSB 8
|
|
|
|
#define RADAR_REPORT_REG1_PULSE_DUR_MASK 0x000000FF
|
|
#define RADAR_REPORT_REG1_PULSE_DUR_LSB 0
|
|
|
|
struct phyerr_fft_report {
|
|
__le32 reg0; /* SEARCH_FFT_REPORT_REG0_ * */
|
|
__le32 reg1; /* SEARCH_FFT_REPORT_REG1_ * */
|
|
} __packed;
|
|
|
|
#define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_MASK 0xFF800000
|
|
#define SEARCH_FFT_REPORT_REG0_TOTAL_GAIN_DB_LSB 23
|
|
|
|
#define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_MASK 0x007FC000
|
|
#define SEARCH_FFT_REPORT_REG0_BASE_PWR_DB_LSB 14
|
|
|
|
#define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_MASK 0x00003000
|
|
#define SEARCH_FFT_REPORT_REG0_FFT_CHN_IDX_LSB 12
|
|
|
|
#define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_MASK 0x00000FFF
|
|
#define SEARCH_FFT_REPORT_REG0_PEAK_SIDX_LSB 0
|
|
|
|
#define SEARCH_FFT_REPORT_REG1_RELPWR_DB_MASK 0xFC000000
|
|
#define SEARCH_FFT_REPORT_REG1_RELPWR_DB_LSB 26
|
|
|
|
#define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_MASK 0x03FC0000
|
|
#define SEARCH_FFT_REPORT_REG1_AVGPWR_DB_LSB 18
|
|
|
|
#define SEARCH_FFT_REPORT_REG1_PEAK_MAG_MASK 0x0003FF00
|
|
#define SEARCH_FFT_REPORT_REG1_PEAK_MAG_LSB 8
|
|
|
|
#define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_MASK 0x000000FF
|
|
#define SEARCH_FFT_REPORT_REG1_NUM_STR_BINS_IB_LSB 0
|
|
|
|
struct phyerr_tlv {
|
|
__le16 len;
|
|
u8 tag;
|
|
u8 sig;
|
|
} __packed;
|
|
|
|
#define DFS_RSSI_POSSIBLY_FALSE 50
|
|
#define DFS_PEAK_MAG_THOLD_POSSIBLY_FALSE 40
|
|
|
|
struct wmi_mgmt_tx_hdr {
|
|
__le32 vdev_id;
|
|
struct wmi_mac_addr peer_macaddr;
|
|
__le32 tx_rate;
|
|
__le32 tx_power;
|
|
__le32 buf_len;
|
|
} __packed;
|
|
|
|
struct wmi_mgmt_tx_cmd {
|
|
struct wmi_mgmt_tx_hdr hdr;
|
|
u8 buf[0];
|
|
} __packed;
|
|
|
|
struct wmi_echo_event {
|
|
__le32 value;
|
|
} __packed;
|
|
|
|
struct wmi_echo_cmd {
|
|
__le32 value;
|
|
} __packed;
|
|
|
|
struct wmi_pdev_set_regdomain_cmd {
|
|
__le32 reg_domain;
|
|
__le32 reg_domain_2G;
|
|
__le32 reg_domain_5G;
|
|
__le32 conformance_test_limit_2G;
|
|
__le32 conformance_test_limit_5G;
|
|
} __packed;
|
|
|
|
enum wmi_dfs_region {
|
|
/* Uninitialized dfs domain */
|
|
WMI_UNINIT_DFS_DOMAIN = 0,
|
|
|
|
/* FCC3 dfs domain */
|
|
WMI_FCC_DFS_DOMAIN = 1,
|
|
|
|
/* ETSI dfs domain */
|
|
WMI_ETSI_DFS_DOMAIN = 2,
|
|
|
|
/*Japan dfs domain */
|
|
WMI_MKK4_DFS_DOMAIN = 3,
|
|
};
|
|
|
|
struct wmi_pdev_set_regdomain_cmd_10x {
|
|
__le32 reg_domain;
|
|
__le32 reg_domain_2G;
|
|
__le32 reg_domain_5G;
|
|
__le32 conformance_test_limit_2G;
|
|
__le32 conformance_test_limit_5G;
|
|
|
|
/* dfs domain from wmi_dfs_region */
|
|
__le32 dfs_domain;
|
|
} __packed;
|
|
|
|
/* Command to set/unset chip in quiet mode */
|
|
struct wmi_pdev_set_quiet_cmd {
|
|
/* period in TUs */
|
|
__le32 period;
|
|
|
|
/* duration in TUs */
|
|
__le32 duration;
|
|
|
|
/* offset in TUs */
|
|
__le32 next_start;
|
|
|
|
/* enable/disable */
|
|
__le32 enabled;
|
|
} __packed;
|
|
|
|
/*
|
|
* 802.11g protection mode.
|
|
*/
|
|
enum ath10k_protmode {
|
|
ATH10K_PROT_NONE = 0, /* no protection */
|
|
ATH10K_PROT_CTSONLY = 1, /* CTS to self */
|
|
ATH10K_PROT_RTSCTS = 2, /* RTS-CTS */
|
|
};
|
|
|
|
enum wmi_rtscts_profile {
|
|
WMI_RTSCTS_FOR_NO_RATESERIES = 0,
|
|
WMI_RTSCTS_FOR_SECOND_RATESERIES,
|
|
WMI_RTSCTS_ACROSS_SW_RETRIES
|
|
};
|
|
|
|
#define WMI_RTSCTS_ENABLED 1
|
|
#define WMI_RTSCTS_SET_MASK 0x0f
|
|
#define WMI_RTSCTS_SET_LSB 0
|
|
|
|
#define WMI_RTSCTS_PROFILE_MASK 0xf0
|
|
#define WMI_RTSCTS_PROFILE_LSB 4
|
|
|
|
enum wmi_beacon_gen_mode {
|
|
WMI_BEACON_STAGGERED_MODE = 0,
|
|
WMI_BEACON_BURST_MODE = 1
|
|
};
|
|
|
|
enum wmi_csa_event_ies_present_flag {
|
|
WMI_CSA_IE_PRESENT = 0x00000001,
|
|
WMI_XCSA_IE_PRESENT = 0x00000002,
|
|
WMI_WBW_IE_PRESENT = 0x00000004,
|
|
WMI_CSWARP_IE_PRESENT = 0x00000008,
|
|
};
|
|
|
|
/* wmi CSA receive event from beacon frame */
|
|
struct wmi_csa_event {
|
|
__le32 i_fc_dur;
|
|
/* Bit 0-15: FC */
|
|
/* Bit 16-31: DUR */
|
|
struct wmi_mac_addr i_addr1;
|
|
struct wmi_mac_addr i_addr2;
|
|
__le32 csa_ie[2];
|
|
__le32 xcsa_ie[2];
|
|
__le32 wb_ie[2];
|
|
__le32 cswarp_ie;
|
|
__le32 ies_present_flag; /* wmi_csa_event_ies_present_flag */
|
|
} __packed;
|
|
|
|
/* the definition of different PDEV parameters */
|
|
#define PDEV_DEFAULT_STATS_UPDATE_PERIOD 500
|
|
#define VDEV_DEFAULT_STATS_UPDATE_PERIOD 500
|
|
#define PEER_DEFAULT_STATS_UPDATE_PERIOD 500
|
|
|
|
struct wmi_pdev_param_map {
|
|
u32 tx_chain_mask;
|
|
u32 rx_chain_mask;
|
|
u32 txpower_limit2g;
|
|
u32 txpower_limit5g;
|
|
u32 txpower_scale;
|
|
u32 beacon_gen_mode;
|
|
u32 beacon_tx_mode;
|
|
u32 resmgr_offchan_mode;
|
|
u32 protection_mode;
|
|
u32 dynamic_bw;
|
|
u32 non_agg_sw_retry_th;
|
|
u32 agg_sw_retry_th;
|
|
u32 sta_kickout_th;
|
|
u32 ac_aggrsize_scaling;
|
|
u32 ltr_enable;
|
|
u32 ltr_ac_latency_be;
|
|
u32 ltr_ac_latency_bk;
|
|
u32 ltr_ac_latency_vi;
|
|
u32 ltr_ac_latency_vo;
|
|
u32 ltr_ac_latency_timeout;
|
|
u32 ltr_sleep_override;
|
|
u32 ltr_rx_override;
|
|
u32 ltr_tx_activity_timeout;
|
|
u32 l1ss_enable;
|
|
u32 dsleep_enable;
|
|
u32 pcielp_txbuf_flush;
|
|
u32 pcielp_txbuf_watermark;
|
|
u32 pcielp_txbuf_tmo_en;
|
|
u32 pcielp_txbuf_tmo_value;
|
|
u32 pdev_stats_update_period;
|
|
u32 vdev_stats_update_period;
|
|
u32 peer_stats_update_period;
|
|
u32 bcnflt_stats_update_period;
|
|
u32 pmf_qos;
|
|
u32 arp_ac_override;
|
|
u32 dcs;
|
|
u32 ani_enable;
|
|
u32 ani_poll_period;
|
|
u32 ani_listen_period;
|
|
u32 ani_ofdm_level;
|
|
u32 ani_cck_level;
|
|
u32 dyntxchain;
|
|
u32 proxy_sta;
|
|
u32 idle_ps_config;
|
|
u32 power_gating_sleep;
|
|
u32 fast_channel_reset;
|
|
u32 burst_dur;
|
|
u32 burst_enable;
|
|
u32 cal_period;
|
|
u32 aggr_burst;
|
|
u32 rx_decap_mode;
|
|
u32 smart_antenna_default_antenna;
|
|
u32 igmpmld_override;
|
|
u32 igmpmld_tid;
|
|
u32 antenna_gain;
|
|
u32 rx_filter;
|
|
u32 set_mcast_to_ucast_tid;
|
|
u32 proxy_sta_mode;
|
|
u32 set_mcast2ucast_mode;
|
|
u32 set_mcast2ucast_buffer;
|
|
u32 remove_mcast2ucast_buffer;
|
|
u32 peer_sta_ps_statechg_enable;
|
|
u32 igmpmld_ac_override;
|
|
u32 block_interbss;
|
|
u32 set_disable_reset_cmdid;
|
|
u32 set_msdu_ttl_cmdid;
|
|
u32 set_ppdu_duration_cmdid;
|
|
u32 txbf_sound_period_cmdid;
|
|
u32 set_promisc_mode_cmdid;
|
|
u32 set_burst_mode_cmdid;
|
|
u32 en_stats;
|
|
u32 mu_group_policy;
|
|
u32 noise_detection;
|
|
u32 noise_threshold;
|
|
u32 dpd_enable;
|
|
u32 set_mcast_bcast_echo;
|
|
u32 atf_strict_sch;
|
|
u32 atf_sched_duration;
|
|
u32 ant_plzn;
|
|
u32 mgmt_retry_limit;
|
|
u32 sensitivity_level;
|
|
u32 signed_txpower_2g;
|
|
u32 signed_txpower_5g;
|
|
u32 enable_per_tid_amsdu;
|
|
u32 enable_per_tid_ampdu;
|
|
u32 cca_threshold;
|
|
u32 rts_fixed_rate;
|
|
u32 pdev_reset;
|
|
u32 wapi_mbssid_offset;
|
|
u32 arp_srcaddr;
|
|
u32 arp_dstaddr;
|
|
u32 enable_btcoex;
|
|
};
|
|
|
|
#define WMI_PDEV_PARAM_UNSUPPORTED 0
|
|
|
|
enum wmi_pdev_param {
|
|
/* TX chain mask */
|
|
WMI_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
|
|
/* RX chain mask */
|
|
WMI_PDEV_PARAM_RX_CHAIN_MASK,
|
|
/* TX power limit for 2G Radio */
|
|
WMI_PDEV_PARAM_TXPOWER_LIMIT2G,
|
|
/* TX power limit for 5G Radio */
|
|
WMI_PDEV_PARAM_TXPOWER_LIMIT5G,
|
|
/* TX power scale */
|
|
WMI_PDEV_PARAM_TXPOWER_SCALE,
|
|
/* Beacon generation mode . 0: host, 1: target */
|
|
WMI_PDEV_PARAM_BEACON_GEN_MODE,
|
|
/* Beacon generation mode . 0: staggered 1: bursted */
|
|
WMI_PDEV_PARAM_BEACON_TX_MODE,
|
|
/*
|
|
* Resource manager off chan mode .
|
|
* 0: turn off off chan mode. 1: turn on offchan mode
|
|
*/
|
|
WMI_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
|
|
/*
|
|
* Protection mode:
|
|
* 0: no protection 1:use CTS-to-self 2: use RTS/CTS
|
|
*/
|
|
WMI_PDEV_PARAM_PROTECTION_MODE,
|
|
/*
|
|
* Dynamic bandwidth - 0: disable, 1: enable
|
|
*
|
|
* When enabled HW rate control tries different bandwidths when
|
|
* retransmitting frames.
|
|
*/
|
|
WMI_PDEV_PARAM_DYNAMIC_BW,
|
|
/* Non aggregrate/ 11g sw retry threshold.0-disable */
|
|
WMI_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
|
|
/* aggregrate sw retry threshold. 0-disable*/
|
|
WMI_PDEV_PARAM_AGG_SW_RETRY_TH,
|
|
/* Station kickout threshold (non of consecutive failures).0-disable */
|
|
WMI_PDEV_PARAM_STA_KICKOUT_TH,
|
|
/* Aggerate size scaling configuration per AC */
|
|
WMI_PDEV_PARAM_AC_AGGRSIZE_SCALING,
|
|
/* LTR enable */
|
|
WMI_PDEV_PARAM_LTR_ENABLE,
|
|
/* LTR latency for BE, in us */
|
|
WMI_PDEV_PARAM_LTR_AC_LATENCY_BE,
|
|
/* LTR latency for BK, in us */
|
|
WMI_PDEV_PARAM_LTR_AC_LATENCY_BK,
|
|
/* LTR latency for VI, in us */
|
|
WMI_PDEV_PARAM_LTR_AC_LATENCY_VI,
|
|
/* LTR latency for VO, in us */
|
|
WMI_PDEV_PARAM_LTR_AC_LATENCY_VO,
|
|
/* LTR AC latency timeout, in ms */
|
|
WMI_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
|
|
/* LTR platform latency override, in us */
|
|
WMI_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
|
|
/* LTR-RX override, in us */
|
|
WMI_PDEV_PARAM_LTR_RX_OVERRIDE,
|
|
/* Tx activity timeout for LTR, in us */
|
|
WMI_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
|
|
/* L1SS state machine enable */
|
|
WMI_PDEV_PARAM_L1SS_ENABLE,
|
|
/* Deep sleep state machine enable */
|
|
WMI_PDEV_PARAM_DSLEEP_ENABLE,
|
|
/* RX buffering flush enable */
|
|
WMI_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
|
|
/* RX buffering matermark */
|
|
WMI_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
|
|
/* RX buffering timeout enable */
|
|
WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
|
|
/* RX buffering timeout value */
|
|
WMI_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
|
|
/* pdev level stats update period in ms */
|
|
WMI_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
|
|
/* vdev level stats update period in ms */
|
|
WMI_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
|
|
/* peer level stats update period in ms */
|
|
WMI_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
|
|
/* beacon filter status update period */
|
|
WMI_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
|
|
/* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
|
|
WMI_PDEV_PARAM_PMF_QOS,
|
|
/* Access category on which ARP frames are sent */
|
|
WMI_PDEV_PARAM_ARP_AC_OVERRIDE,
|
|
/* DCS configuration */
|
|
WMI_PDEV_PARAM_DCS,
|
|
/* Enable/Disable ANI on target */
|
|
WMI_PDEV_PARAM_ANI_ENABLE,
|
|
/* configure the ANI polling period */
|
|
WMI_PDEV_PARAM_ANI_POLL_PERIOD,
|
|
/* configure the ANI listening period */
|
|
WMI_PDEV_PARAM_ANI_LISTEN_PERIOD,
|
|
/* configure OFDM immunity level */
|
|
WMI_PDEV_PARAM_ANI_OFDM_LEVEL,
|
|
/* configure CCK immunity level */
|
|
WMI_PDEV_PARAM_ANI_CCK_LEVEL,
|
|
/* Enable/Disable CDD for 1x1 STAs in rate control module */
|
|
WMI_PDEV_PARAM_DYNTXCHAIN,
|
|
/* Enable/Disable proxy STA */
|
|
WMI_PDEV_PARAM_PROXY_STA,
|
|
/* Enable/Disable low power state when all VDEVs are inactive/idle. */
|
|
WMI_PDEV_PARAM_IDLE_PS_CONFIG,
|
|
/* Enable/Disable power gating sleep */
|
|
WMI_PDEV_PARAM_POWER_GATING_SLEEP,
|
|
};
|
|
|
|
enum wmi_10x_pdev_param {
|
|
/* TX chian mask */
|
|
WMI_10X_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
|
|
/* RX chian mask */
|
|
WMI_10X_PDEV_PARAM_RX_CHAIN_MASK,
|
|
/* TX power limit for 2G Radio */
|
|
WMI_10X_PDEV_PARAM_TXPOWER_LIMIT2G,
|
|
/* TX power limit for 5G Radio */
|
|
WMI_10X_PDEV_PARAM_TXPOWER_LIMIT5G,
|
|
/* TX power scale */
|
|
WMI_10X_PDEV_PARAM_TXPOWER_SCALE,
|
|
/* Beacon generation mode . 0: host, 1: target */
|
|
WMI_10X_PDEV_PARAM_BEACON_GEN_MODE,
|
|
/* Beacon generation mode . 0: staggered 1: bursted */
|
|
WMI_10X_PDEV_PARAM_BEACON_TX_MODE,
|
|
/*
|
|
* Resource manager off chan mode .
|
|
* 0: turn off off chan mode. 1: turn on offchan mode
|
|
*/
|
|
WMI_10X_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
|
|
/*
|
|
* Protection mode:
|
|
* 0: no protection 1:use CTS-to-self 2: use RTS/CTS
|
|
*/
|
|
WMI_10X_PDEV_PARAM_PROTECTION_MODE,
|
|
/* Dynamic bandwidth 0: disable 1: enable */
|
|
WMI_10X_PDEV_PARAM_DYNAMIC_BW,
|
|
/* Non aggregrate/ 11g sw retry threshold.0-disable */
|
|
WMI_10X_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
|
|
/* aggregrate sw retry threshold. 0-disable*/
|
|
WMI_10X_PDEV_PARAM_AGG_SW_RETRY_TH,
|
|
/* Station kickout threshold (non of consecutive failures).0-disable */
|
|
WMI_10X_PDEV_PARAM_STA_KICKOUT_TH,
|
|
/* Aggerate size scaling configuration per AC */
|
|
WMI_10X_PDEV_PARAM_AC_AGGRSIZE_SCALING,
|
|
/* LTR enable */
|
|
WMI_10X_PDEV_PARAM_LTR_ENABLE,
|
|
/* LTR latency for BE, in us */
|
|
WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BE,
|
|
/* LTR latency for BK, in us */
|
|
WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_BK,
|
|
/* LTR latency for VI, in us */
|
|
WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VI,
|
|
/* LTR latency for VO, in us */
|
|
WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_VO,
|
|
/* LTR AC latency timeout, in ms */
|
|
WMI_10X_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
|
|
/* LTR platform latency override, in us */
|
|
WMI_10X_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
|
|
/* LTR-RX override, in us */
|
|
WMI_10X_PDEV_PARAM_LTR_RX_OVERRIDE,
|
|
/* Tx activity timeout for LTR, in us */
|
|
WMI_10X_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
|
|
/* L1SS state machine enable */
|
|
WMI_10X_PDEV_PARAM_L1SS_ENABLE,
|
|
/* Deep sleep state machine enable */
|
|
WMI_10X_PDEV_PARAM_DSLEEP_ENABLE,
|
|
/* pdev level stats update period in ms */
|
|
WMI_10X_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
|
|
/* vdev level stats update period in ms */
|
|
WMI_10X_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
|
|
/* peer level stats update period in ms */
|
|
WMI_10X_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
|
|
/* beacon filter status update period */
|
|
WMI_10X_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
|
|
/* QOS Mgmt frame protection MFP/PMF 0: disable, 1: enable */
|
|
WMI_10X_PDEV_PARAM_PMF_QOS,
|
|
/* Access category on which ARP and DHCP frames are sent */
|
|
WMI_10X_PDEV_PARAM_ARPDHCP_AC_OVERRIDE,
|
|
/* DCS configuration */
|
|
WMI_10X_PDEV_PARAM_DCS,
|
|
/* Enable/Disable ANI on target */
|
|
WMI_10X_PDEV_PARAM_ANI_ENABLE,
|
|
/* configure the ANI polling period */
|
|
WMI_10X_PDEV_PARAM_ANI_POLL_PERIOD,
|
|
/* configure the ANI listening period */
|
|
WMI_10X_PDEV_PARAM_ANI_LISTEN_PERIOD,
|
|
/* configure OFDM immunity level */
|
|
WMI_10X_PDEV_PARAM_ANI_OFDM_LEVEL,
|
|
/* configure CCK immunity level */
|
|
WMI_10X_PDEV_PARAM_ANI_CCK_LEVEL,
|
|
/* Enable/Disable CDD for 1x1 STAs in rate control module */
|
|
WMI_10X_PDEV_PARAM_DYNTXCHAIN,
|
|
/* Enable/Disable Fast channel reset*/
|
|
WMI_10X_PDEV_PARAM_FAST_CHANNEL_RESET,
|
|
/* Set Bursting DUR */
|
|
WMI_10X_PDEV_PARAM_BURST_DUR,
|
|
/* Set Bursting Enable*/
|
|
WMI_10X_PDEV_PARAM_BURST_ENABLE,
|
|
|
|
/* following are available as of firmware 10.2 */
|
|
WMI_10X_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
|
|
WMI_10X_PDEV_PARAM_IGMPMLD_OVERRIDE,
|
|
WMI_10X_PDEV_PARAM_IGMPMLD_TID,
|
|
WMI_10X_PDEV_PARAM_ANTENNA_GAIN,
|
|
WMI_10X_PDEV_PARAM_RX_DECAP_MODE,
|
|
WMI_10X_PDEV_PARAM_RX_FILTER,
|
|
WMI_10X_PDEV_PARAM_SET_MCAST_TO_UCAST_TID,
|
|
WMI_10X_PDEV_PARAM_PROXY_STA_MODE,
|
|
WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_MODE,
|
|
WMI_10X_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
|
|
WMI_10X_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
|
|
WMI_10X_PDEV_PARAM_PEER_STA_PS_STATECHG_ENABLE,
|
|
WMI_10X_PDEV_PARAM_RTS_FIXED_RATE,
|
|
WMI_10X_PDEV_PARAM_CAL_PERIOD,
|
|
WMI_10X_PDEV_PARAM_ATF_STRICT_SCH,
|
|
WMI_10X_PDEV_PARAM_ATF_SCHED_DURATION,
|
|
WMI_10X_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
|
|
WMI_10X_PDEV_PARAM_PDEV_RESET
|
|
};
|
|
|
|
enum wmi_10_4_pdev_param {
|
|
WMI_10_4_PDEV_PARAM_TX_CHAIN_MASK = 0x1,
|
|
WMI_10_4_PDEV_PARAM_RX_CHAIN_MASK,
|
|
WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT2G,
|
|
WMI_10_4_PDEV_PARAM_TXPOWER_LIMIT5G,
|
|
WMI_10_4_PDEV_PARAM_TXPOWER_SCALE,
|
|
WMI_10_4_PDEV_PARAM_BEACON_GEN_MODE,
|
|
WMI_10_4_PDEV_PARAM_BEACON_TX_MODE,
|
|
WMI_10_4_PDEV_PARAM_RESMGR_OFFCHAN_MODE,
|
|
WMI_10_4_PDEV_PARAM_PROTECTION_MODE,
|
|
WMI_10_4_PDEV_PARAM_DYNAMIC_BW,
|
|
WMI_10_4_PDEV_PARAM_NON_AGG_SW_RETRY_TH,
|
|
WMI_10_4_PDEV_PARAM_AGG_SW_RETRY_TH,
|
|
WMI_10_4_PDEV_PARAM_STA_KICKOUT_TH,
|
|
WMI_10_4_PDEV_PARAM_AC_AGGRSIZE_SCALING,
|
|
WMI_10_4_PDEV_PARAM_LTR_ENABLE,
|
|
WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BE,
|
|
WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_BK,
|
|
WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VI,
|
|
WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_VO,
|
|
WMI_10_4_PDEV_PARAM_LTR_AC_LATENCY_TIMEOUT,
|
|
WMI_10_4_PDEV_PARAM_LTR_SLEEP_OVERRIDE,
|
|
WMI_10_4_PDEV_PARAM_LTR_RX_OVERRIDE,
|
|
WMI_10_4_PDEV_PARAM_LTR_TX_ACTIVITY_TIMEOUT,
|
|
WMI_10_4_PDEV_PARAM_L1SS_ENABLE,
|
|
WMI_10_4_PDEV_PARAM_DSLEEP_ENABLE,
|
|
WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_FLUSH,
|
|
WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_WATERMARK,
|
|
WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_EN,
|
|
WMI_10_4_PDEV_PARAM_PCIELP_TXBUF_TMO_VALUE,
|
|
WMI_10_4_PDEV_PARAM_PDEV_STATS_UPDATE_PERIOD,
|
|
WMI_10_4_PDEV_PARAM_VDEV_STATS_UPDATE_PERIOD,
|
|
WMI_10_4_PDEV_PARAM_PEER_STATS_UPDATE_PERIOD,
|
|
WMI_10_4_PDEV_PARAM_BCNFLT_STATS_UPDATE_PERIOD,
|
|
WMI_10_4_PDEV_PARAM_PMF_QOS,
|
|
WMI_10_4_PDEV_PARAM_ARP_AC_OVERRIDE,
|
|
WMI_10_4_PDEV_PARAM_DCS,
|
|
WMI_10_4_PDEV_PARAM_ANI_ENABLE,
|
|
WMI_10_4_PDEV_PARAM_ANI_POLL_PERIOD,
|
|
WMI_10_4_PDEV_PARAM_ANI_LISTEN_PERIOD,
|
|
WMI_10_4_PDEV_PARAM_ANI_OFDM_LEVEL,
|
|
WMI_10_4_PDEV_PARAM_ANI_CCK_LEVEL,
|
|
WMI_10_4_PDEV_PARAM_DYNTXCHAIN,
|
|
WMI_10_4_PDEV_PARAM_PROXY_STA,
|
|
WMI_10_4_PDEV_PARAM_IDLE_PS_CONFIG,
|
|
WMI_10_4_PDEV_PARAM_POWER_GATING_SLEEP,
|
|
WMI_10_4_PDEV_PARAM_AGGR_BURST,
|
|
WMI_10_4_PDEV_PARAM_RX_DECAP_MODE,
|
|
WMI_10_4_PDEV_PARAM_FAST_CHANNEL_RESET,
|
|
WMI_10_4_PDEV_PARAM_BURST_DUR,
|
|
WMI_10_4_PDEV_PARAM_BURST_ENABLE,
|
|
WMI_10_4_PDEV_PARAM_SMART_ANTENNA_DEFAULT_ANTENNA,
|
|
WMI_10_4_PDEV_PARAM_IGMPMLD_OVERRIDE,
|
|
WMI_10_4_PDEV_PARAM_IGMPMLD_TID,
|
|
WMI_10_4_PDEV_PARAM_ANTENNA_GAIN,
|
|
WMI_10_4_PDEV_PARAM_RX_FILTER,
|
|
WMI_10_4_PDEV_SET_MCAST_TO_UCAST_TID,
|
|
WMI_10_4_PDEV_PARAM_PROXY_STA_MODE,
|
|
WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_MODE,
|
|
WMI_10_4_PDEV_PARAM_SET_MCAST2UCAST_BUFFER,
|
|
WMI_10_4_PDEV_PARAM_REMOVE_MCAST2UCAST_BUFFER,
|
|
WMI_10_4_PDEV_PEER_STA_PS_STATECHG_ENABLE,
|
|
WMI_10_4_PDEV_PARAM_IGMPMLD_AC_OVERRIDE,
|
|
WMI_10_4_PDEV_PARAM_BLOCK_INTERBSS,
|
|
WMI_10_4_PDEV_PARAM_SET_DISABLE_RESET_CMDID,
|
|
WMI_10_4_PDEV_PARAM_SET_MSDU_TTL_CMDID,
|
|
WMI_10_4_PDEV_PARAM_SET_PPDU_DURATION_CMDID,
|
|
WMI_10_4_PDEV_PARAM_TXBF_SOUND_PERIOD_CMDID,
|
|
WMI_10_4_PDEV_PARAM_SET_PROMISC_MODE_CMDID,
|
|
WMI_10_4_PDEV_PARAM_SET_BURST_MODE_CMDID,
|
|
WMI_10_4_PDEV_PARAM_EN_STATS,
|
|
WMI_10_4_PDEV_PARAM_MU_GROUP_POLICY,
|
|
WMI_10_4_PDEV_PARAM_NOISE_DETECTION,
|
|
WMI_10_4_PDEV_PARAM_NOISE_THRESHOLD,
|
|
WMI_10_4_PDEV_PARAM_DPD_ENABLE,
|
|
WMI_10_4_PDEV_PARAM_SET_MCAST_BCAST_ECHO,
|
|
WMI_10_4_PDEV_PARAM_ATF_STRICT_SCH,
|
|
WMI_10_4_PDEV_PARAM_ATF_SCHED_DURATION,
|
|
WMI_10_4_PDEV_PARAM_ANT_PLZN,
|
|
WMI_10_4_PDEV_PARAM_MGMT_RETRY_LIMIT,
|
|
WMI_10_4_PDEV_PARAM_SENSITIVITY_LEVEL,
|
|
WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_2G,
|
|
WMI_10_4_PDEV_PARAM_SIGNED_TXPOWER_5G,
|
|
WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMSDU,
|
|
WMI_10_4_PDEV_PARAM_ENABLE_PER_TID_AMPDU,
|
|
WMI_10_4_PDEV_PARAM_CCA_THRESHOLD,
|
|
WMI_10_4_PDEV_PARAM_RTS_FIXED_RATE,
|
|
WMI_10_4_PDEV_PARAM_CAL_PERIOD,
|
|
WMI_10_4_PDEV_PARAM_PDEV_RESET,
|
|
WMI_10_4_PDEV_PARAM_WAPI_MBSSID_OFFSET,
|
|
WMI_10_4_PDEV_PARAM_ARP_SRCADDR,
|
|
WMI_10_4_PDEV_PARAM_ARP_DSTADDR,
|
|
WMI_10_4_PDEV_PARAM_TXPOWER_DECR_DB,
|
|
WMI_10_4_PDEV_PARAM_RX_BATCHMODE,
|
|
WMI_10_4_PDEV_PARAM_PACKET_AGGR_DELAY,
|
|
WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCH,
|
|
WMI_10_4_PDEV_PARAM_ATF_OBSS_NOISE_SCALING_FACTOR,
|
|
WMI_10_4_PDEV_PARAM_CUST_TXPOWER_SCALE,
|
|
WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE,
|
|
WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY,
|
|
WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX,
|
|
};
|
|
|
|
struct wmi_pdev_set_param_cmd {
|
|
__le32 param_id;
|
|
__le32 param_value;
|
|
} __packed;
|
|
|
|
struct wmi_pdev_set_base_macaddr_cmd {
|
|
struct wmi_mac_addr mac_addr;
|
|
} __packed;
|
|
|
|
/* valid period is 1 ~ 60000ms, unit in millisecond */
|
|
#define WMI_PDEV_PARAM_CAL_PERIOD_MAX 60000
|
|
|
|
struct wmi_pdev_get_tpc_config_cmd {
|
|
/* parameter */
|
|
__le32 param;
|
|
} __packed;
|
|
|
|
#define WMI_TPC_CONFIG_PARAM 1
|
|
#define WMI_TPC_FINAL_RATE_MAX 240
|
|
#define WMI_TPC_TX_N_CHAIN 4
|
|
#define WMI_TPC_RATE_MAX (WMI_TPC_TX_N_CHAIN * 65)
|
|
#define WMI_TPC_PREAM_TABLE_MAX 10
|
|
#define WMI_TPC_FLAG 3
|
|
#define WMI_TPC_BUF_SIZE 10
|
|
#define WMI_TPC_BEAMFORMING 2
|
|
|
|
enum wmi_tpc_table_type {
|
|
WMI_TPC_TABLE_TYPE_CDD = 0,
|
|
WMI_TPC_TABLE_TYPE_STBC = 1,
|
|
WMI_TPC_TABLE_TYPE_TXBF = 2,
|
|
};
|
|
|
|
enum wmi_tpc_config_event_flag {
|
|
WMI_TPC_CONFIG_EVENT_FLAG_TABLE_CDD = 0x1,
|
|
WMI_TPC_CONFIG_EVENT_FLAG_TABLE_STBC = 0x2,
|
|
WMI_TPC_CONFIG_EVENT_FLAG_TABLE_TXBF = 0x4,
|
|
};
|
|
|
|
struct wmi_pdev_tpc_config_event {
|
|
__le32 reg_domain;
|
|
__le32 chan_freq;
|
|
__le32 phy_mode;
|
|
__le32 twice_antenna_reduction;
|
|
__le32 twice_max_rd_power;
|
|
a_sle32 twice_antenna_gain;
|
|
__le32 power_limit;
|
|
__le32 rate_max;
|
|
__le32 num_tx_chain;
|
|
__le32 ctl;
|
|
__le32 flags;
|
|
s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
|
|
s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
|
|
s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
|
|
s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
|
|
u8 rates_array[WMI_TPC_RATE_MAX];
|
|
} __packed;
|
|
|
|
/* Transmit power scale factor. */
|
|
enum wmi_tp_scale {
|
|
WMI_TP_SCALE_MAX = 0, /* no scaling (default) */
|
|
WMI_TP_SCALE_50 = 1, /* 50% of max (-3 dBm) */
|
|
WMI_TP_SCALE_25 = 2, /* 25% of max (-6 dBm) */
|
|
WMI_TP_SCALE_12 = 3, /* 12% of max (-9 dBm) */
|
|
WMI_TP_SCALE_MIN = 4, /* min, but still on */
|
|
WMI_TP_SCALE_SIZE = 5, /* max num of enum */
|
|
};
|
|
|
|
struct wmi_pdev_tpc_final_table_event {
|
|
__le32 reg_domain;
|
|
__le32 chan_freq;
|
|
__le32 phy_mode;
|
|
__le32 twice_antenna_reduction;
|
|
__le32 twice_max_rd_power;
|
|
a_sle32 twice_antenna_gain;
|
|
__le32 power_limit;
|
|
__le32 rate_max;
|
|
__le32 num_tx_chain;
|
|
__le32 ctl;
|
|
__le32 flags;
|
|
s8 max_reg_allow_pow[WMI_TPC_TX_N_CHAIN];
|
|
s8 max_reg_allow_pow_agcdd[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
|
|
s8 max_reg_allow_pow_agstbc[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
|
|
s8 max_reg_allow_pow_agtxbf[WMI_TPC_TX_N_CHAIN][WMI_TPC_TX_N_CHAIN];
|
|
u8 rates_array[WMI_TPC_FINAL_RATE_MAX];
|
|
u8 ctl_power_table[WMI_TPC_BEAMFORMING][WMI_TPC_TX_N_CHAIN]
|
|
[WMI_TPC_TX_N_CHAIN];
|
|
} __packed;
|
|
|
|
struct wmi_pdev_get_tpc_table_cmd {
|
|
__le32 param;
|
|
} __packed;
|
|
|
|
enum wmi_tpc_pream_2ghz {
|
|
WMI_TPC_PREAM_2GHZ_CCK = 0,
|
|
WMI_TPC_PREAM_2GHZ_OFDM,
|
|
WMI_TPC_PREAM_2GHZ_HT20,
|
|
WMI_TPC_PREAM_2GHZ_HT40,
|
|
WMI_TPC_PREAM_2GHZ_VHT20,
|
|
WMI_TPC_PREAM_2GHZ_VHT40,
|
|
WMI_TPC_PREAM_2GHZ_VHT80,
|
|
};
|
|
|
|
enum wmi_tpc_pream_5ghz {
|
|
WMI_TPC_PREAM_5GHZ_OFDM = 1,
|
|
WMI_TPC_PREAM_5GHZ_HT20,
|
|
WMI_TPC_PREAM_5GHZ_HT40,
|
|
WMI_TPC_PREAM_5GHZ_VHT20,
|
|
WMI_TPC_PREAM_5GHZ_VHT40,
|
|
WMI_TPC_PREAM_5GHZ_VHT80,
|
|
WMI_TPC_PREAM_5GHZ_HTCUP,
|
|
};
|
|
|
|
#define WMI_PEER_PS_STATE_DISABLED 2
|
|
|
|
struct wmi_peer_sta_ps_state_chg_event {
|
|
struct wmi_mac_addr peer_macaddr;
|
|
__le32 peer_ps_state;
|
|
} __packed;
|
|
|
|
struct wmi_pdev_chanlist_update_event {
|
|
/* number of channels */
|
|
__le32 num_chan;
|
|
/* array of channels */
|
|
struct wmi_channel channel_list[1];
|
|
} __packed;
|
|
|
|
#define WMI_MAX_DEBUG_MESG (sizeof(u32) * 32)
|
|
|
|
struct wmi_debug_mesg_event {
|
|
/* message buffer, NULL terminated */
|
|
char bufp[WMI_MAX_DEBUG_MESG];
|
|
} __packed;
|
|
|
|
enum {
|
|
/* P2P device */
|
|
VDEV_SUBTYPE_P2PDEV = 0,
|
|
/* P2P client */
|
|
VDEV_SUBTYPE_P2PCLI,
|
|
/* P2P GO */
|
|
VDEV_SUBTYPE_P2PGO,
|
|
/* BT3.0 HS */
|
|
VDEV_SUBTYPE_BT,
|
|
};
|
|
|
|
struct wmi_pdev_set_channel_cmd {
|
|
/* idnore power , only use flags , mode and freq */
|
|
struct wmi_channel chan;
|
|
} __packed;
|
|
|
|
struct wmi_pdev_pktlog_enable_cmd {
|
|
__le32 ev_bitmap;
|
|
} __packed;
|
|
|
|
/* Customize the DSCP (bit) to TID (0-7) mapping for QOS */
|
|
#define WMI_DSCP_MAP_MAX (64)
|
|
struct wmi_pdev_set_dscp_tid_map_cmd {
|
|
/* map indicating DSCP to TID conversion */
|
|
__le32 dscp_to_tid_map[WMI_DSCP_MAP_MAX];
|
|
} __packed;
|
|
|
|
enum mcast_bcast_rate_id {
|
|
WMI_SET_MCAST_RATE,
|
|
WMI_SET_BCAST_RATE
|
|
};
|
|
|
|
struct mcast_bcast_rate {
|
|
enum mcast_bcast_rate_id rate_id;
|
|
__le32 rate;
|
|
} __packed;
|
|
|
|
struct wmi_wmm_params {
|
|
__le32 cwmin;
|
|
__le32 cwmax;
|
|
__le32 aifs;
|
|
__le32 txop;
|
|
__le32 acm;
|
|
__le32 no_ack;
|
|
} __packed;
|
|
|
|
struct wmi_pdev_set_wmm_params {
|
|
struct wmi_wmm_params ac_be;
|
|
struct wmi_wmm_params ac_bk;
|
|
struct wmi_wmm_params ac_vi;
|
|
struct wmi_wmm_params ac_vo;
|
|
} __packed;
|
|
|
|
struct wmi_wmm_params_arg {
|
|
u32 cwmin;
|
|
u32 cwmax;
|
|
u32 aifs;
|
|
u32 txop;
|
|
u32 acm;
|
|
u32 no_ack;
|
|
};
|
|
|
|
struct wmi_wmm_params_all_arg {
|
|
struct wmi_wmm_params_arg ac_be;
|
|
struct wmi_wmm_params_arg ac_bk;
|
|
struct wmi_wmm_params_arg ac_vi;
|
|
struct wmi_wmm_params_arg ac_vo;
|
|
};
|
|
|
|
struct wmi_pdev_stats_tx {
|
|
/* Num HTT cookies queued to dispatch list */
|
|
__le32 comp_queued;
|
|
|
|
/* Num HTT cookies dispatched */
|
|
__le32 comp_delivered;
|
|
|
|
/* Num MSDU queued to WAL */
|
|
__le32 msdu_enqued;
|
|
|
|
/* Num MPDU queue to WAL */
|
|
__le32 mpdu_enqued;
|
|
|
|
/* Num MSDUs dropped by WMM limit */
|
|
__le32 wmm_drop;
|
|
|
|
/* Num Local frames queued */
|
|
__le32 local_enqued;
|
|
|
|
/* Num Local frames done */
|
|
__le32 local_freed;
|
|
|
|
/* Num queued to HW */
|
|
__le32 hw_queued;
|
|
|
|
/* Num PPDU reaped from HW */
|
|
__le32 hw_reaped;
|
|
|
|
/* Num underruns */
|
|
__le32 underrun;
|
|
|
|
/* Num PPDUs cleaned up in TX abort */
|
|
__le32 tx_abort;
|
|
|
|
/* Num MPDUs requed by SW */
|
|
__le32 mpdus_requed;
|
|
|
|
/* excessive retries */
|
|
__le32 tx_ko;
|
|
|
|
/* data hw rate code */
|
|
__le32 data_rc;
|
|
|
|
/* Scheduler self triggers */
|
|
__le32 self_triggers;
|
|
|
|
/* frames dropped due to excessive sw retries */
|
|
__le32 sw_retry_failure;
|
|
|
|
/* illegal rate phy errors */
|
|
__le32 illgl_rate_phy_err;
|
|
|
|
/* wal pdev continuous xretry */
|
|
__le32 pdev_cont_xretry;
|
|
|
|
/* wal pdev continous xretry */
|
|
__le32 pdev_tx_timeout;
|
|
|
|
/* wal pdev resets */
|
|
__le32 pdev_resets;
|
|
|
|
/* frames dropped due to non-availability of stateless TIDs */
|
|
__le32 stateless_tid_alloc_failure;
|
|
|
|
__le32 phy_underrun;
|
|
|
|
/* MPDU is more than txop limit */
|
|
__le32 txop_ovf;
|
|
} __packed;
|
|
|
|
struct wmi_10_4_pdev_stats_tx {
|
|
/* Num HTT cookies queued to dispatch list */
|
|
__le32 comp_queued;
|
|
|
|
/* Num HTT cookies dispatched */
|
|
__le32 comp_delivered;
|
|
|
|
/* Num MSDU queued to WAL */
|
|
__le32 msdu_enqued;
|
|
|
|
/* Num MPDU queue to WAL */
|
|
__le32 mpdu_enqued;
|
|
|
|
/* Num MSDUs dropped by WMM limit */
|
|
__le32 wmm_drop;
|
|
|
|
/* Num Local frames queued */
|
|
__le32 local_enqued;
|
|
|
|
/* Num Local frames done */
|
|
__le32 local_freed;
|
|
|
|
/* Num queued to HW */
|
|
__le32 hw_queued;
|
|
|
|
/* Num PPDU reaped from HW */
|
|
__le32 hw_reaped;
|
|
|
|
/* Num underruns */
|
|
__le32 underrun;
|
|
|
|
/* HW Paused. */
|
|
__le32 hw_paused;
|
|
|
|
/* Num PPDUs cleaned up in TX abort */
|
|
__le32 tx_abort;
|
|
|
|
/* Num MPDUs requed by SW */
|
|
__le32 mpdus_requed;
|
|
|
|
/* excessive retries */
|
|
__le32 tx_ko;
|
|
|
|
/* data hw rate code */
|
|
__le32 data_rc;
|
|
|
|
/* Scheduler self triggers */
|
|
__le32 self_triggers;
|
|
|
|
/* frames dropped due to excessive sw retries */
|
|
__le32 sw_retry_failure;
|
|
|
|
/* illegal rate phy errors */
|
|
__le32 illgl_rate_phy_err;
|
|
|
|
/* wal pdev continuous xretry */
|
|
__le32 pdev_cont_xretry;
|
|
|
|
/* wal pdev tx timeouts */
|
|
__le32 pdev_tx_timeout;
|
|
|
|
/* wal pdev resets */
|
|
__le32 pdev_resets;
|
|
|
|
/* frames dropped due to non-availability of stateless TIDs */
|
|
__le32 stateless_tid_alloc_failure;
|
|
|
|
__le32 phy_underrun;
|
|
|
|
/* MPDU is more than txop limit */
|
|
__le32 txop_ovf;
|
|
|
|
/* Number of Sequences posted */
|
|
__le32 seq_posted;
|
|
|
|
/* Number of Sequences failed queueing */
|
|
__le32 seq_failed_queueing;
|
|
|
|
/* Number of Sequences completed */
|
|
__le32 seq_completed;
|
|
|
|
/* Number of Sequences restarted */
|
|
__le32 seq_restarted;
|
|
|
|
/* Number of MU Sequences posted */
|
|
__le32 mu_seq_posted;
|
|
|
|
/* Num MPDUs flushed by SW, HWPAUSED,SW TXABORT(Reset,channel change) */
|
|
__le32 mpdus_sw_flush;
|
|
|
|
/* Num MPDUs filtered by HW, all filter condition (TTL expired) */
|
|
__le32 mpdus_hw_filter;
|
|
|
|
/* Num MPDUs truncated by PDG
|
|
* (TXOP, TBTT, PPDU_duration based on rate, dyn_bw)
|
|
*/
|
|
__le32 mpdus_truncated;
|
|
|
|
/* Num MPDUs that was tried but didn't receive ACK or BA */
|
|
__le32 mpdus_ack_failed;
|
|
|
|
/* Num MPDUs that was dropped due to expiry. */
|
|
__le32 mpdus_expired;
|
|
} __packed;
|
|
|
|
struct wmi_pdev_stats_rx {
|
|
/* Cnts any change in ring routing mid-ppdu */
|
|
__le32 mid_ppdu_route_change;
|
|
|
|
/* Total number of statuses processed */
|
|
__le32 status_rcvd;
|
|
|
|
/* Extra frags on rings 0-3 */
|
|
__le32 r0_frags;
|
|
__le32 r1_frags;
|
|
__le32 r2_frags;
|
|
__le32 r3_frags;
|
|
|
|
/* MSDUs / MPDUs delivered to HTT */
|
|
__le32 htt_msdus;
|
|
__le32 htt_mpdus;
|
|
|
|
/* MSDUs / MPDUs delivered to local stack */
|
|
__le32 loc_msdus;
|
|
__le32 loc_mpdus;
|
|
|
|
/* AMSDUs that have more MSDUs than the status ring size */
|
|
__le32 oversize_amsdu;
|
|
|
|
/* Number of PHY errors */
|
|
__le32 phy_errs;
|
|
|
|
/* Number of PHY errors drops */
|
|
__le32 phy_err_drop;
|
|
|
|
/* Number of mpdu errors - FCS, MIC, ENC etc. */
|
|
__le32 mpdu_errs;
|
|
} __packed;
|
|
|
|
struct wmi_pdev_stats_peer {
|
|
/* REMOVE THIS ONCE REAL PEER STAT COUNTERS ARE ADDED */
|
|
__le32 dummy;
|
|
} __packed;
|
|
|
|
enum wmi_stats_id {
|
|
WMI_STAT_PEER = BIT(0),
|
|
WMI_STAT_AP = BIT(1),
|
|
WMI_STAT_PDEV = BIT(2),
|
|
WMI_STAT_VDEV = BIT(3),
|
|
WMI_STAT_BCNFLT = BIT(4),
|
|
WMI_STAT_VDEV_RATE = BIT(5),
|
|
};
|
|
|
|
enum wmi_10_4_stats_id {
|
|
WMI_10_4_STAT_PEER = BIT(0),
|
|
WMI_10_4_STAT_AP = BIT(1),
|
|
WMI_10_4_STAT_INST = BIT(2),
|
|
WMI_10_4_STAT_PEER_EXTD = BIT(3),
|
|
WMI_10_4_STAT_VDEV_EXTD = BIT(4),
|
|
};
|
|
|
|
enum wmi_tlv_stats_id {
|
|
WMI_TLV_STAT_PEER = BIT(0),
|
|
WMI_TLV_STAT_AP = BIT(1),
|
|
WMI_TLV_STAT_PDEV = BIT(2),
|
|
WMI_TLV_STAT_VDEV = BIT(3),
|
|
WMI_TLV_STAT_PEER_EXTD = BIT(10),
|
|
};
|
|
|
|
struct wlan_inst_rssi_args {
|
|
__le16 cfg_retry_count;
|
|
__le16 retry_count;
|
|
};
|
|
|
|
struct wmi_request_stats_cmd {
|
|
__le32 stats_id;
|
|
|
|
__le32 vdev_id;
|
|
|
|
/* peer MAC address */
|
|
struct wmi_mac_addr peer_macaddr;
|
|
|
|
/* Instantaneous RSSI arguments */
|
|
struct wlan_inst_rssi_args inst_rssi_args;
|
|
} __packed;
|
|
|
|
/* Suspend option */
|
|
enum {
|
|
/* suspend */
|
|
WMI_PDEV_SUSPEND,
|
|
|
|
/* suspend and disable all interrupts */
|
|
WMI_PDEV_SUSPEND_AND_DISABLE_INTR,
|
|
};
|
|
|
|
struct wmi_pdev_suspend_cmd {
|
|
/* suspend option sent to target */
|
|
__le32 suspend_opt;
|
|
} __packed;
|
|
|
|
struct wmi_stats_event {
|
|
__le32 stats_id; /* WMI_STAT_ */
|
|
/*
|
|
* number of pdev stats event structures
|
|
* (wmi_pdev_stats) 0 or 1
|
|
*/
|
|
__le32 num_pdev_stats;
|
|
/*
|
|
* number of vdev stats event structures
|
|
* (wmi_vdev_stats) 0 or max vdevs
|
|
*/
|
|
__le32 num_vdev_stats;
|
|
/*
|
|
* number of peer stats event structures
|
|
* (wmi_peer_stats) 0 or max peers
|
|
*/
|
|
__le32 num_peer_stats;
|
|
__le32 num_bcnflt_stats;
|
|
/*
|
|
* followed by
|
|
* num_pdev_stats * size of(struct wmi_pdev_stats)
|
|
* num_vdev_stats * size of(struct wmi_vdev_stats)
|
|
* num_peer_stats * size of(struct wmi_peer_stats)
|
|
*
|
|
* By having a zero sized array, the pointer to data area
|
|
* becomes available without increasing the struct size
|
|
*/
|
|
u8 data[0];
|
|
} __packed;
|
|
|
|
struct wmi_10_2_stats_event {
|
|
__le32 stats_id; /* %WMI_REQUEST_ */
|
|
__le32 num_pdev_stats;
|
|
__le32 num_pdev_ext_stats;
|
|
__le32 num_vdev_stats;
|
|
__le32 num_peer_stats;
|
|
__le32 num_bcnflt_stats;
|
|
u8 data[0];
|
|
} __packed;
|
|
|
|
/*
|
|
* PDEV statistics
|
|
* TODO: add all PDEV stats here
|
|
*/
|
|
struct wmi_pdev_stats_base {
|
|
__le32 chan_nf;
|
|
__le32 tx_frame_count; /* Cycles spent transmitting frames */
|
|
__le32 rx_frame_count; /* Cycles spent receiving frames */
|
|
__le32 rx_clear_count; /* Total channel busy time, evidently */
|
|
__le32 cycle_count; /* Total on-channel time */
|
|
__le32 phy_err_count;
|
|
__le32 chan_tx_pwr;
|
|
} __packed;
|
|
|
|
struct wmi_pdev_stats {
|
|
struct wmi_pdev_stats_base base;
|
|
struct wmi_pdev_stats_tx tx;
|
|
struct wmi_pdev_stats_rx rx;
|
|
struct wmi_pdev_stats_peer peer;
|
|
} __packed;
|
|
|
|
struct wmi_pdev_stats_extra {
|
|
__le32 ack_rx_bad;
|
|
__le32 rts_bad;
|
|
__le32 rts_good;
|
|
__le32 fcs_bad;
|
|
__le32 no_beacons;
|
|
__le32 mib_int_count;
|
|
} __packed;
|
|
|
|
struct wmi_10x_pdev_stats {
|
|
struct wmi_pdev_stats_base base;
|
|
struct wmi_pdev_stats_tx tx;
|
|
struct wmi_pdev_stats_rx rx;
|
|
struct wmi_pdev_stats_peer peer;
|
|
struct wmi_pdev_stats_extra extra;
|
|
} __packed;
|
|
|
|
struct wmi_pdev_stats_mem {
|
|
__le32 dram_free;
|
|
__le32 iram_free;
|
|
} __packed;
|
|
|
|
struct wmi_10_2_pdev_stats {
|
|
struct wmi_pdev_stats_base base;
|
|
struct wmi_pdev_stats_tx tx;
|
|
__le32 mc_drop;
|
|
struct wmi_pdev_stats_rx rx;
|
|
__le32 pdev_rx_timeout;
|
|
struct wmi_pdev_stats_mem mem;
|
|
struct wmi_pdev_stats_peer peer;
|
|
struct wmi_pdev_stats_extra extra;
|
|
} __packed;
|
|
|
|
struct wmi_10_4_pdev_stats {
|
|
struct wmi_pdev_stats_base base;
|
|
struct wmi_10_4_pdev_stats_tx tx;
|
|
struct wmi_pdev_stats_rx rx;
|
|
__le32 rx_ovfl_errs;
|
|
struct wmi_pdev_stats_mem mem;
|
|
__le32 sram_free_size;
|
|
struct wmi_pdev_stats_extra extra;
|
|
} __packed;
|
|
|
|
/*
|
|
* VDEV statistics
|
|
*/
|
|
|
|
#define WMI_VDEV_STATS_FTM_COUNT_VALID BIT(31)
|
|
#define WMI_VDEV_STATS_FTM_COUNT_LSB 0
|
|
#define WMI_VDEV_STATS_FTM_COUNT_MASK 0x7fffffff
|
|
|
|
struct wmi_vdev_stats {
|
|
__le32 vdev_id;
|
|
} __packed;
|
|
|
|
struct wmi_vdev_stats_extd {
|
|
__le32 vdev_id;
|
|
__le32 ppdu_aggr_cnt;
|
|
__le32 ppdu_noack;
|
|
__le32 mpdu_queued;
|
|
__le32 ppdu_nonaggr_cnt;
|
|
__le32 mpdu_sw_requeued;
|
|
__le32 mpdu_suc_retry;
|
|
__le32 mpdu_suc_multitry;
|
|
__le32 mpdu_fail_retry;
|
|
__le32 tx_ftm_suc;
|
|
__le32 tx_ftm_suc_retry;
|
|
__le32 tx_ftm_fail;
|
|
__le32 rx_ftmr_cnt;
|
|
__le32 rx_ftmr_dup_cnt;
|
|
__le32 rx_iftmr_cnt;
|
|
__le32 rx_iftmr_dup_cnt;
|
|
__le32 reserved[6];
|
|
} __packed;
|
|
|
|
/*
|
|
* peer statistics.
|
|
* TODO: add more stats
|
|
*/
|
|
struct wmi_peer_stats {
|
|
struct wmi_mac_addr peer_macaddr;
|
|
__le32 peer_rssi;
|
|
__le32 peer_tx_rate;
|
|
} __packed;
|
|
|
|
struct wmi_10x_peer_stats {
|
|
struct wmi_peer_stats old;
|
|
__le32 peer_rx_rate;
|
|
} __packed;
|
|
|
|
struct wmi_10_2_peer_stats {
|
|
struct wmi_peer_stats old;
|
|
__le32 peer_rx_rate;
|
|
__le32 current_per;
|
|
__le32 retries;
|
|
__le32 tx_rate_count;
|
|
__le32 max_4ms_frame_len;
|
|
__le32 total_sub_frames;
|
|
__le32 tx_bytes;
|
|
__le32 num_pkt_loss_overflow[4];
|
|
__le32 num_pkt_loss_excess_retry[4];
|
|
} __packed;
|
|
|
|
struct wmi_10_2_4_peer_stats {
|
|
struct wmi_10_2_peer_stats common;
|
|
__le32 peer_rssi_changed;
|
|
} __packed;
|
|
|
|
struct wmi_10_2_4_ext_peer_stats {
|
|
struct wmi_10_2_peer_stats common;
|
|
__le32 peer_rssi_changed;
|
|
__le32 rx_duration;
|
|
} __packed;
|
|
|
|
struct wmi_10_4_peer_stats {
|
|
struct wmi_mac_addr peer_macaddr;
|
|
__le32 peer_rssi;
|
|
__le32 peer_rssi_seq_num;
|
|
__le32 peer_tx_rate;
|
|
__le32 peer_rx_rate;
|
|
__le32 current_per;
|
|
__le32 retries;
|
|
__le32 tx_rate_count;
|
|
__le32 max_4ms_frame_len;
|
|
__le32 total_sub_frames;
|
|
__le32 tx_bytes;
|
|
__le32 num_pkt_loss_overflow[4];
|
|
__le32 num_pkt_loss_excess_retry[4];
|
|
__le32 peer_rssi_changed;
|
|
} __packed;
|
|
|
|
struct wmi_10_4_peer_extd_stats {
|
|
struct wmi_mac_addr peer_macaddr;
|
|
__le32 inactive_time;
|
|
__le32 peer_chain_rssi;
|
|
__le32 rx_duration;
|
|
__le32 reserved[10];
|
|
} __packed;
|
|
|
|
struct wmi_10_4_bss_bcn_stats {
|
|
__le32 vdev_id;
|
|
__le32 bss_bcns_dropped;
|
|
__le32 bss_bcn_delivered;
|
|
} __packed;
|
|
|
|
struct wmi_10_4_bss_bcn_filter_stats {
|
|
__le32 bcns_dropped;
|
|
__le32 bcns_delivered;
|
|
__le32 active_filters;
|
|
struct wmi_10_4_bss_bcn_stats bss_stats;
|
|
} __packed;
|
|
|
|
struct wmi_10_2_pdev_ext_stats {
|
|
__le32 rx_rssi_comb;
|
|
__le32 rx_rssi[4];
|
|
__le32 rx_mcs[10];
|
|
__le32 tx_mcs[10];
|
|
__le32 ack_rssi;
|
|
} __packed;
|
|
|
|
struct wmi_vdev_create_cmd {
|
|
__le32 vdev_id;
|
|
__le32 vdev_type;
|
|
__le32 vdev_subtype;
|
|
struct wmi_mac_addr vdev_macaddr;
|
|
} __packed;
|
|
|
|
enum wmi_vdev_type {
|
|
WMI_VDEV_TYPE_AP = 1,
|
|
WMI_VDEV_TYPE_STA = 2,
|
|
WMI_VDEV_TYPE_IBSS = 3,
|
|
WMI_VDEV_TYPE_MONITOR = 4,
|
|
};
|
|
|
|
enum wmi_vdev_subtype {
|
|
WMI_VDEV_SUBTYPE_NONE,
|
|
WMI_VDEV_SUBTYPE_P2P_DEVICE,
|
|
WMI_VDEV_SUBTYPE_P2P_CLIENT,
|
|
WMI_VDEV_SUBTYPE_P2P_GO,
|
|
WMI_VDEV_SUBTYPE_PROXY_STA,
|
|
WMI_VDEV_SUBTYPE_MESH_11S,
|
|
WMI_VDEV_SUBTYPE_MESH_NON_11S,
|
|
};
|
|
|
|
enum wmi_vdev_subtype_legacy {
|
|
WMI_VDEV_SUBTYPE_LEGACY_NONE = 0,
|
|
WMI_VDEV_SUBTYPE_LEGACY_P2P_DEV = 1,
|
|
WMI_VDEV_SUBTYPE_LEGACY_P2P_CLI = 2,
|
|
WMI_VDEV_SUBTYPE_LEGACY_P2P_GO = 3,
|
|
WMI_VDEV_SUBTYPE_LEGACY_PROXY_STA = 4,
|
|
};
|
|
|
|
enum wmi_vdev_subtype_10_2_4 {
|
|
WMI_VDEV_SUBTYPE_10_2_4_NONE = 0,
|
|
WMI_VDEV_SUBTYPE_10_2_4_P2P_DEV = 1,
|
|
WMI_VDEV_SUBTYPE_10_2_4_P2P_CLI = 2,
|
|
WMI_VDEV_SUBTYPE_10_2_4_P2P_GO = 3,
|
|
WMI_VDEV_SUBTYPE_10_2_4_PROXY_STA = 4,
|
|
WMI_VDEV_SUBTYPE_10_2_4_MESH_11S = 5,
|
|
};
|
|
|
|
enum wmi_vdev_subtype_10_4 {
|
|
WMI_VDEV_SUBTYPE_10_4_NONE = 0,
|
|
WMI_VDEV_SUBTYPE_10_4_P2P_DEV = 1,
|
|
WMI_VDEV_SUBTYPE_10_4_P2P_CLI = 2,
|
|
WMI_VDEV_SUBTYPE_10_4_P2P_GO = 3,
|
|
WMI_VDEV_SUBTYPE_10_4_PROXY_STA = 4,
|
|
WMI_VDEV_SUBTYPE_10_4_MESH_NON_11S = 5,
|
|
WMI_VDEV_SUBTYPE_10_4_MESH_11S = 6,
|
|
};
|
|
|
|
/* values for vdev_subtype */
|
|
|
|
/* values for vdev_start_request flags */
|
|
/*
|
|
* Indicates that AP VDEV uses hidden ssid. only valid for
|
|
* AP/GO
|
|
*/
|
|
#define WMI_VDEV_START_HIDDEN_SSID (1 << 0)
|
|
/*
|
|
* Indicates if robust management frame/management frame
|
|
* protection is enabled. For GO/AP vdevs, it indicates that
|
|
* it may support station/client associations with RMF enabled.
|
|
* For STA/client vdevs, it indicates that sta will
|
|
* associate with AP with RMF enabled.
|
|
*/
|
|
#define WMI_VDEV_START_PMF_ENABLED (1 << 1)
|
|
|
|
struct wmi_p2p_noa_descriptor {
|
|
__le32 type_count; /* 255: continuous schedule, 0: reserved */
|
|
__le32 duration; /* Absent period duration in micro seconds */
|
|
__le32 interval; /* Absent period interval in micro seconds */
|
|
__le32 start_time; /* 32 bit tsf time when in starts */
|
|
} __packed;
|
|
|
|
struct wmi_vdev_start_request_cmd {
|
|
/* WMI channel */
|
|
struct wmi_channel chan;
|
|
/* unique id identifying the VDEV, generated by the caller */
|
|
__le32 vdev_id;
|
|
/* requestor id identifying the caller module */
|
|
__le32 requestor_id;
|
|
/* beacon interval from received beacon */
|
|
__le32 beacon_interval;
|
|
/* DTIM Period from the received beacon */
|
|
__le32 dtim_period;
|
|
/* Flags */
|
|
__le32 flags;
|
|
/* ssid field. Only valid for AP/GO/IBSS/BTAmp VDEV type. */
|
|
struct wmi_ssid ssid;
|
|
/* beacon/probe response xmit rate. Applicable for SoftAP. */
|
|
__le32 bcn_tx_rate;
|
|
/* beacon/probe response xmit power. Applicable for SoftAP. */
|
|
__le32 bcn_tx_power;
|
|
/* number of p2p NOA descriptor(s) from scan entry */
|
|
__le32 num_noa_descriptors;
|
|
/*
|
|
* Disable H/W ack. This used by WMI_VDEV_RESTART_REQUEST_CMDID.
|
|
* During CAC, Our HW shouldn't ack ditected frames
|
|
*/
|
|
__le32 disable_hw_ack;
|
|
/* actual p2p NOA descriptor from scan entry */
|
|
struct wmi_p2p_noa_descriptor noa_descriptors[2];
|
|
} __packed;
|
|
|
|
struct wmi_vdev_restart_request_cmd {
|
|
struct wmi_vdev_start_request_cmd vdev_start_request_cmd;
|
|
} __packed;
|
|
|
|
struct wmi_vdev_start_request_arg {
|
|
u32 vdev_id;
|
|
struct wmi_channel_arg channel;
|
|
u32 bcn_intval;
|
|
u32 dtim_period;
|
|
u8 *ssid;
|
|
u32 ssid_len;
|
|
u32 bcn_tx_rate;
|
|
u32 bcn_tx_power;
|
|
bool disable_hw_ack;
|
|
bool hidden_ssid;
|
|
bool pmf_enabled;
|
|
};
|
|
|
|
struct wmi_vdev_delete_cmd {
|
|
/* unique id identifying the VDEV, generated by the caller */
|
|
__le32 vdev_id;
|
|
} __packed;
|
|
|
|
struct wmi_vdev_up_cmd {
|
|
__le32 vdev_id;
|
|
__le32 vdev_assoc_id;
|
|
struct wmi_mac_addr vdev_bssid;
|
|
} __packed;
|
|
|
|
struct wmi_vdev_stop_cmd {
|
|
__le32 vdev_id;
|
|
} __packed;
|
|
|
|
struct wmi_vdev_down_cmd {
|
|
__le32 vdev_id;
|
|
} __packed;
|
|
|
|
struct wmi_vdev_standby_response_cmd {
|
|
/* unique id identifying the VDEV, generated by the caller */
|
|
__le32 vdev_id;
|
|
} __packed;
|
|
|
|
struct wmi_vdev_resume_response_cmd {
|
|
/* unique id identifying the VDEV, generated by the caller */
|
|
__le32 vdev_id;
|
|
} __packed;
|
|
|
|
struct wmi_vdev_set_param_cmd {
|
|
__le32 vdev_id;
|
|
__le32 param_id;
|
|
__le32 param_value;
|
|
} __packed;
|
|
|
|
#define WMI_MAX_KEY_INDEX 3
|
|
#define WMI_MAX_KEY_LEN 32
|
|
|
|
#define WMI_KEY_PAIRWISE 0x00
|
|
#define WMI_KEY_GROUP 0x01
|
|
#define WMI_KEY_TX_USAGE 0x02 /* default tx key - static wep */
|
|
|
|
struct wmi_key_seq_counter {
|
|
__le32 key_seq_counter_l;
|
|
__le32 key_seq_counter_h;
|
|
} __packed;
|
|
|
|
enum wmi_cipher_suites {
|
|
WMI_CIPHER_NONE,
|
|
WMI_CIPHER_WEP,
|
|
WMI_CIPHER_TKIP,
|
|
WMI_CIPHER_AES_OCB,
|
|
WMI_CIPHER_AES_CCM,
|
|
WMI_CIPHER_WAPI,
|
|
WMI_CIPHER_CKIP,
|
|
WMI_CIPHER_AES_CMAC,
|
|
WMI_CIPHER_AES_GCM,
|
|
};
|
|
|
|
enum wmi_tlv_cipher_suites {
|
|
WMI_TLV_CIPHER_NONE,
|
|
WMI_TLV_CIPHER_WEP,
|
|
WMI_TLV_CIPHER_TKIP,
|
|
WMI_TLV_CIPHER_AES_OCB,
|
|
WMI_TLV_CIPHER_AES_CCM,
|
|
WMI_TLV_CIPHER_WAPI,
|
|
WMI_TLV_CIPHER_CKIP,
|
|
WMI_TLV_CIPHER_AES_CMAC,
|
|
WMI_TLV_CIPHER_ANY,
|
|
WMI_TLV_CIPHER_AES_GCM,
|
|
};
|
|
|
|
struct wmi_vdev_install_key_cmd {
|
|
__le32 vdev_id;
|
|
struct wmi_mac_addr peer_macaddr;
|
|
__le32 key_idx;
|
|
__le32 key_flags;
|
|
__le32 key_cipher; /* %WMI_CIPHER_ */
|
|
struct wmi_key_seq_counter key_rsc_counter;
|
|
struct wmi_key_seq_counter key_global_rsc_counter;
|
|
struct wmi_key_seq_counter key_tsc_counter;
|
|
u8 wpi_key_rsc_counter[16];
|
|
u8 wpi_key_tsc_counter[16];
|
|
__le32 key_len;
|
|
__le32 key_txmic_len;
|
|
__le32 key_rxmic_len;
|
|
|
|
/* contains key followed by tx mic followed by rx mic */
|
|
u8 key_data[0];
|
|
} __packed;
|
|
|
|
struct wmi_vdev_install_key_arg {
|
|
u32 vdev_id;
|
|
const u8 *macaddr;
|
|
u32 key_idx;
|
|
u32 key_flags;
|
|
u32 key_cipher;
|
|
u32 key_len;
|
|
u32 key_txmic_len;
|
|
u32 key_rxmic_len;
|
|
const void *key_data;
|
|
};
|
|
|
|
/*
|
|
* vdev fixed rate format:
|
|
* - preamble - b7:b6 - see WMI_RATE_PREMABLE_
|
|
* - nss - b5:b4 - ss number (0 mean 1ss)
|
|
* - rate_mcs - b3:b0 - as below
|
|
* CCK: 0 - 11Mbps, 1 - 5,5Mbps, 2 - 2Mbps, 3 - 1Mbps,
|
|
* 4 - 11Mbps (s), 5 - 5,5Mbps (s), 6 - 2Mbps (s)
|
|
* OFDM: 0 - 48Mbps, 1 - 24Mbps, 2 - 12Mbps, 3 - 6Mbps,
|
|
* 4 - 54Mbps, 5 - 36Mbps, 6 - 18Mbps, 7 - 9Mbps
|
|
* HT/VHT: MCS index
|
|
*/
|
|
|
|
/* Preamble types to be used with VDEV fixed rate configuration */
|
|
enum wmi_rate_preamble {
|
|
WMI_RATE_PREAMBLE_OFDM,
|
|
WMI_RATE_PREAMBLE_CCK,
|
|
WMI_RATE_PREAMBLE_HT,
|
|
WMI_RATE_PREAMBLE_VHT,
|
|
};
|
|
|
|
#define ATH10K_HW_NSS(rate) (1 + (((rate) >> 4) & 0x3))
|
|
#define ATH10K_HW_PREAMBLE(rate) (((rate) >> 6) & 0x3)
|
|
#define ATH10K_HW_MCS_RATE(rate) ((rate) & 0xf)
|
|
#define ATH10K_HW_LEGACY_RATE(rate) ((rate) & 0x3f)
|
|
#define ATH10K_HW_BW(flags) (((flags) >> 3) & 0x3)
|
|
#define ATH10K_HW_GI(flags) (((flags) >> 5) & 0x1)
|
|
#define ATH10K_HW_RATECODE(rate, nss, preamble) \
|
|
(((preamble) << 6) | ((nss) << 4) | (rate))
|
|
#define ATH10K_HW_AMPDU(flags) ((flags) & 0x1)
|
|
#define ATH10K_HW_BA_FAIL(flags) (((flags) >> 1) & 0x3)
|
|
#define ATH10K_FW_SKIPPED_RATE_CTRL(flags) (((flags) >> 6) & 0x1)
|
|
|
|
#define ATH10K_VHT_MCS_NUM 10
|
|
#define ATH10K_BW_NUM 6
|
|
#define ATH10K_NSS_NUM 4
|
|
#define ATH10K_LEGACY_NUM 12
|
|
#define ATH10K_GI_NUM 2
|
|
#define ATH10K_HT_MCS_NUM 32
|
|
#define ATH10K_RATE_TABLE_NUM 320
|
|
#define ATH10K_RATE_INFO_FLAGS_SGI_BIT 2
|
|
|
|
/* Value to disable fixed rate setting */
|
|
#define WMI_FIXED_RATE_NONE (0xff)
|
|
|
|
struct wmi_vdev_param_map {
|
|
u32 rts_threshold;
|
|
u32 fragmentation_threshold;
|
|
u32 beacon_interval;
|
|
u32 listen_interval;
|
|
u32 multicast_rate;
|
|
u32 mgmt_tx_rate;
|
|
u32 slot_time;
|
|
u32 preamble;
|
|
u32 swba_time;
|
|
u32 wmi_vdev_stats_update_period;
|
|
u32 wmi_vdev_pwrsave_ageout_time;
|
|
u32 wmi_vdev_host_swba_interval;
|
|
u32 dtim_period;
|
|
u32 wmi_vdev_oc_scheduler_air_time_limit;
|
|
u32 wds;
|
|
u32 atim_window;
|
|
u32 bmiss_count_max;
|
|
u32 bmiss_first_bcnt;
|
|
u32 bmiss_final_bcnt;
|
|
u32 feature_wmm;
|
|
u32 chwidth;
|
|
u32 chextoffset;
|
|
u32 disable_htprotection;
|
|
u32 sta_quickkickout;
|
|
u32 mgmt_rate;
|
|
u32 protection_mode;
|
|
u32 fixed_rate;
|
|
u32 sgi;
|
|
u32 ldpc;
|
|
u32 tx_stbc;
|
|
u32 rx_stbc;
|
|
u32 intra_bss_fwd;
|
|
u32 def_keyid;
|
|
u32 nss;
|
|
u32 bcast_data_rate;
|
|
u32 mcast_data_rate;
|
|
u32 mcast_indicate;
|
|
u32 dhcp_indicate;
|
|
u32 unknown_dest_indicate;
|
|
u32 ap_keepalive_min_idle_inactive_time_secs;
|
|
u32 ap_keepalive_max_idle_inactive_time_secs;
|
|
u32 ap_keepalive_max_unresponsive_time_secs;
|
|
u32 ap_enable_nawds;
|
|
u32 mcast2ucast_set;
|
|
u32 enable_rtscts;
|
|
u32 txbf;
|
|
u32 packet_powersave;
|
|
u32 drop_unencry;
|
|
u32 tx_encap_type;
|
|
u32 ap_detect_out_of_sync_sleeping_sta_time_secs;
|
|
u32 rc_num_retries;
|
|
u32 cabq_maxdur;
|
|
u32 mfptest_set;
|
|
u32 rts_fixed_rate;
|
|
u32 vht_sgimask;
|
|
u32 vht80_ratemask;
|
|
u32 early_rx_adjust_enable;
|
|
u32 early_rx_tgt_bmiss_num;
|
|
u32 early_rx_bmiss_sample_cycle;
|
|
u32 early_rx_slop_step;
|
|
u32 early_rx_init_slop;
|
|
u32 early_rx_adjust_pause;
|
|
u32 proxy_sta;
|
|
u32 meru_vc;
|
|
u32 rx_decap_type;
|
|
u32 bw_nss_ratemask;
|
|
u32 inc_tsf;
|
|
u32 dec_tsf;
|
|
u32 disable_4addr_src_lrn;
|
|
u32 rtt_responder_role;
|
|
};
|
|
|
|
#define WMI_VDEV_PARAM_UNSUPPORTED 0
|
|
|
|
/* the definition of different VDEV parameters */
|
|
enum wmi_vdev_param {
|
|
/* RTS Threshold */
|
|
WMI_VDEV_PARAM_RTS_THRESHOLD = 0x1,
|
|
/* Fragmentation threshold */
|
|
WMI_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
|
|
/* beacon interval in TUs */
|
|
WMI_VDEV_PARAM_BEACON_INTERVAL,
|
|
/* Listen interval in TUs */
|
|
WMI_VDEV_PARAM_LISTEN_INTERVAL,
|
|
/* multicast rate in Mbps */
|
|
WMI_VDEV_PARAM_MULTICAST_RATE,
|
|
/* management frame rate in Mbps */
|
|
WMI_VDEV_PARAM_MGMT_TX_RATE,
|
|
/* slot time (long vs short) */
|
|
WMI_VDEV_PARAM_SLOT_TIME,
|
|
/* preamble (long vs short) */
|
|
WMI_VDEV_PARAM_PREAMBLE,
|
|
/* SWBA time (time before tbtt in msec) */
|
|
WMI_VDEV_PARAM_SWBA_TIME,
|
|
/* time period for updating VDEV stats */
|
|
WMI_VDEV_STATS_UPDATE_PERIOD,
|
|
/* age out time in msec for frames queued for station in power save */
|
|
WMI_VDEV_PWRSAVE_AGEOUT_TIME,
|
|
/*
|
|
* Host SWBA interval (time in msec before tbtt for SWBA event
|
|
* generation).
|
|
*/
|
|
WMI_VDEV_HOST_SWBA_INTERVAL,
|
|
/* DTIM period (specified in units of num beacon intervals) */
|
|
WMI_VDEV_PARAM_DTIM_PERIOD,
|
|
/*
|
|
* scheduler air time limit for this VDEV. used by off chan
|
|
* scheduler.
|
|
*/
|
|
WMI_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
|
|
/* enable/dsiable WDS for this VDEV */
|
|
WMI_VDEV_PARAM_WDS,
|
|
/* ATIM Window */
|
|
WMI_VDEV_PARAM_ATIM_WINDOW,
|
|
/* BMISS max */
|
|
WMI_VDEV_PARAM_BMISS_COUNT_MAX,
|
|
/* BMISS first time */
|
|
WMI_VDEV_PARAM_BMISS_FIRST_BCNT,
|
|
/* BMISS final time */
|
|
WMI_VDEV_PARAM_BMISS_FINAL_BCNT,
|
|
/* WMM enables/disabled */
|
|
WMI_VDEV_PARAM_FEATURE_WMM,
|
|
/* Channel width */
|
|
WMI_VDEV_PARAM_CHWIDTH,
|
|
/* Channel Offset */
|
|
WMI_VDEV_PARAM_CHEXTOFFSET,
|
|
/* Disable HT Protection */
|
|
WMI_VDEV_PARAM_DISABLE_HTPROTECTION,
|
|
/* Quick STA Kickout */
|
|
WMI_VDEV_PARAM_STA_QUICKKICKOUT,
|
|
/* Rate to be used with Management frames */
|
|
WMI_VDEV_PARAM_MGMT_RATE,
|
|
/* Protection Mode */
|
|
WMI_VDEV_PARAM_PROTECTION_MODE,
|
|
/* Fixed rate setting */
|
|
WMI_VDEV_PARAM_FIXED_RATE,
|
|
/* Short GI Enable/Disable */
|
|
WMI_VDEV_PARAM_SGI,
|
|
/* Enable LDPC */
|
|
WMI_VDEV_PARAM_LDPC,
|
|
/* Enable Tx STBC */
|
|
WMI_VDEV_PARAM_TX_STBC,
|
|
/* Enable Rx STBC */
|
|
WMI_VDEV_PARAM_RX_STBC,
|
|
/* Intra BSS forwarding */
|
|
WMI_VDEV_PARAM_INTRA_BSS_FWD,
|
|
/* Setting Default xmit key for Vdev */
|
|
WMI_VDEV_PARAM_DEF_KEYID,
|
|
/* NSS width */
|
|
WMI_VDEV_PARAM_NSS,
|
|
/* Set the custom rate for the broadcast data frames */
|
|
WMI_VDEV_PARAM_BCAST_DATA_RATE,
|
|
/* Set the custom rate (rate-code) for multicast data frames */
|
|
WMI_VDEV_PARAM_MCAST_DATA_RATE,
|
|
/* Tx multicast packet indicate Enable/Disable */
|
|
WMI_VDEV_PARAM_MCAST_INDICATE,
|
|
/* Tx DHCP packet indicate Enable/Disable */
|
|
WMI_VDEV_PARAM_DHCP_INDICATE,
|
|
/* Enable host inspection of Tx unicast packet to unknown destination */
|
|
WMI_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
|
|
|
|
/* The minimum amount of time AP begins to consider STA inactive */
|
|
WMI_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
|
|
|
|
/*
|
|
* An associated STA is considered inactive when there is no recent
|
|
* TX/RX activity and no downlink frames are buffered for it. Once a
|
|
* STA exceeds the maximum idle inactive time, the AP will send an
|
|
* 802.11 data-null as a keep alive to verify the STA is still
|
|
* associated. If the STA does ACK the data-null, or if the data-null
|
|
* is buffered and the STA does not retrieve it, the STA will be
|
|
* considered unresponsive
|
|
* (see WMI_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
|
|
*/
|
|
WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
|
|
|
|
/*
|
|
* An associated STA is considered unresponsive if there is no recent
|
|
* TX/RX activity and downlink frames are buffered for it. Once a STA
|
|
* exceeds the maximum unresponsive time, the AP will send a
|
|
* WMI_STA_KICKOUT event to the host so the STA can be deleted.
|
|
*/
|
|
WMI_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
|
|
|
|
/* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
|
|
WMI_VDEV_PARAM_AP_ENABLE_NAWDS,
|
|
/* Enable/Disable RTS-CTS */
|
|
WMI_VDEV_PARAM_ENABLE_RTSCTS,
|
|
/* Enable TXBFee/er */
|
|
WMI_VDEV_PARAM_TXBF,
|
|
|
|
/* Set packet power save */
|
|
WMI_VDEV_PARAM_PACKET_POWERSAVE,
|
|
|
|
/*
|
|
* Drops un-encrypted packets if eceived in an encrypted connection
|
|
* otherwise forwards to host.
|
|
*/
|
|
WMI_VDEV_PARAM_DROP_UNENCRY,
|
|
|
|
/*
|
|
* Set the encapsulation type for frames.
|
|
*/
|
|
WMI_VDEV_PARAM_TX_ENCAP_TYPE,
|
|
};
|
|
|
|
/* the definition of different VDEV parameters */
|
|
enum wmi_10x_vdev_param {
|
|
/* RTS Threshold */
|
|
WMI_10X_VDEV_PARAM_RTS_THRESHOLD = 0x1,
|
|
/* Fragmentation threshold */
|
|
WMI_10X_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
|
|
/* beacon interval in TUs */
|
|
WMI_10X_VDEV_PARAM_BEACON_INTERVAL,
|
|
/* Listen interval in TUs */
|
|
WMI_10X_VDEV_PARAM_LISTEN_INTERVAL,
|
|
/* multicast rate in Mbps */
|
|
WMI_10X_VDEV_PARAM_MULTICAST_RATE,
|
|
/* management frame rate in Mbps */
|
|
WMI_10X_VDEV_PARAM_MGMT_TX_RATE,
|
|
/* slot time (long vs short) */
|
|
WMI_10X_VDEV_PARAM_SLOT_TIME,
|
|
/* preamble (long vs short) */
|
|
WMI_10X_VDEV_PARAM_PREAMBLE,
|
|
/* SWBA time (time before tbtt in msec) */
|
|
WMI_10X_VDEV_PARAM_SWBA_TIME,
|
|
/* time period for updating VDEV stats */
|
|
WMI_10X_VDEV_STATS_UPDATE_PERIOD,
|
|
/* age out time in msec for frames queued for station in power save */
|
|
WMI_10X_VDEV_PWRSAVE_AGEOUT_TIME,
|
|
/*
|
|
* Host SWBA interval (time in msec before tbtt for SWBA event
|
|
* generation).
|
|
*/
|
|
WMI_10X_VDEV_HOST_SWBA_INTERVAL,
|
|
/* DTIM period (specified in units of num beacon intervals) */
|
|
WMI_10X_VDEV_PARAM_DTIM_PERIOD,
|
|
/*
|
|
* scheduler air time limit for this VDEV. used by off chan
|
|
* scheduler.
|
|
*/
|
|
WMI_10X_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
|
|
/* enable/dsiable WDS for this VDEV */
|
|
WMI_10X_VDEV_PARAM_WDS,
|
|
/* ATIM Window */
|
|
WMI_10X_VDEV_PARAM_ATIM_WINDOW,
|
|
/* BMISS max */
|
|
WMI_10X_VDEV_PARAM_BMISS_COUNT_MAX,
|
|
/* WMM enables/disabled */
|
|
WMI_10X_VDEV_PARAM_FEATURE_WMM,
|
|
/* Channel width */
|
|
WMI_10X_VDEV_PARAM_CHWIDTH,
|
|
/* Channel Offset */
|
|
WMI_10X_VDEV_PARAM_CHEXTOFFSET,
|
|
/* Disable HT Protection */
|
|
WMI_10X_VDEV_PARAM_DISABLE_HTPROTECTION,
|
|
/* Quick STA Kickout */
|
|
WMI_10X_VDEV_PARAM_STA_QUICKKICKOUT,
|
|
/* Rate to be used with Management frames */
|
|
WMI_10X_VDEV_PARAM_MGMT_RATE,
|
|
/* Protection Mode */
|
|
WMI_10X_VDEV_PARAM_PROTECTION_MODE,
|
|
/* Fixed rate setting */
|
|
WMI_10X_VDEV_PARAM_FIXED_RATE,
|
|
/* Short GI Enable/Disable */
|
|
WMI_10X_VDEV_PARAM_SGI,
|
|
/* Enable LDPC */
|
|
WMI_10X_VDEV_PARAM_LDPC,
|
|
/* Enable Tx STBC */
|
|
WMI_10X_VDEV_PARAM_TX_STBC,
|
|
/* Enable Rx STBC */
|
|
WMI_10X_VDEV_PARAM_RX_STBC,
|
|
/* Intra BSS forwarding */
|
|
WMI_10X_VDEV_PARAM_INTRA_BSS_FWD,
|
|
/* Setting Default xmit key for Vdev */
|
|
WMI_10X_VDEV_PARAM_DEF_KEYID,
|
|
/* NSS width */
|
|
WMI_10X_VDEV_PARAM_NSS,
|
|
/* Set the custom rate for the broadcast data frames */
|
|
WMI_10X_VDEV_PARAM_BCAST_DATA_RATE,
|
|
/* Set the custom rate (rate-code) for multicast data frames */
|
|
WMI_10X_VDEV_PARAM_MCAST_DATA_RATE,
|
|
/* Tx multicast packet indicate Enable/Disable */
|
|
WMI_10X_VDEV_PARAM_MCAST_INDICATE,
|
|
/* Tx DHCP packet indicate Enable/Disable */
|
|
WMI_10X_VDEV_PARAM_DHCP_INDICATE,
|
|
/* Enable host inspection of Tx unicast packet to unknown destination */
|
|
WMI_10X_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
|
|
|
|
/* The minimum amount of time AP begins to consider STA inactive */
|
|
WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
|
|
|
|
/*
|
|
* An associated STA is considered inactive when there is no recent
|
|
* TX/RX activity and no downlink frames are buffered for it. Once a
|
|
* STA exceeds the maximum idle inactive time, the AP will send an
|
|
* 802.11 data-null as a keep alive to verify the STA is still
|
|
* associated. If the STA does ACK the data-null, or if the data-null
|
|
* is buffered and the STA does not retrieve it, the STA will be
|
|
* considered unresponsive
|
|
* (see WMI_10X_VDEV_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS).
|
|
*/
|
|
WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
|
|
|
|
/*
|
|
* An associated STA is considered unresponsive if there is no recent
|
|
* TX/RX activity and downlink frames are buffered for it. Once a STA
|
|
* exceeds the maximum unresponsive time, the AP will send a
|
|
* WMI_10X_STA_KICKOUT event to the host so the STA can be deleted.
|
|
*/
|
|
WMI_10X_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
|
|
|
|
/* Enable NAWDS : MCAST INSPECT Enable, NAWDS Flag set */
|
|
WMI_10X_VDEV_PARAM_AP_ENABLE_NAWDS,
|
|
|
|
WMI_10X_VDEV_PARAM_MCAST2UCAST_SET,
|
|
/* Enable/Disable RTS-CTS */
|
|
WMI_10X_VDEV_PARAM_ENABLE_RTSCTS,
|
|
|
|
WMI_10X_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
|
|
|
|
/* following are available as of firmware 10.2 */
|
|
WMI_10X_VDEV_PARAM_TX_ENCAP_TYPE,
|
|
WMI_10X_VDEV_PARAM_CABQ_MAXDUR,
|
|
WMI_10X_VDEV_PARAM_MFPTEST_SET,
|
|
WMI_10X_VDEV_PARAM_RTS_FIXED_RATE,
|
|
WMI_10X_VDEV_PARAM_VHT_SGIMASK,
|
|
WMI_10X_VDEV_PARAM_VHT80_RATEMASK,
|
|
WMI_10X_VDEV_PARAM_TSF_INCREMENT,
|
|
};
|
|
|
|
enum wmi_10_4_vdev_param {
|
|
WMI_10_4_VDEV_PARAM_RTS_THRESHOLD = 0x1,
|
|
WMI_10_4_VDEV_PARAM_FRAGMENTATION_THRESHOLD,
|
|
WMI_10_4_VDEV_PARAM_BEACON_INTERVAL,
|
|
WMI_10_4_VDEV_PARAM_LISTEN_INTERVAL,
|
|
WMI_10_4_VDEV_PARAM_MULTICAST_RATE,
|
|
WMI_10_4_VDEV_PARAM_MGMT_TX_RATE,
|
|
WMI_10_4_VDEV_PARAM_SLOT_TIME,
|
|
WMI_10_4_VDEV_PARAM_PREAMBLE,
|
|
WMI_10_4_VDEV_PARAM_SWBA_TIME,
|
|
WMI_10_4_VDEV_STATS_UPDATE_PERIOD,
|
|
WMI_10_4_VDEV_PWRSAVE_AGEOUT_TIME,
|
|
WMI_10_4_VDEV_HOST_SWBA_INTERVAL,
|
|
WMI_10_4_VDEV_PARAM_DTIM_PERIOD,
|
|
WMI_10_4_VDEV_OC_SCHEDULER_AIR_TIME_LIMIT,
|
|
WMI_10_4_VDEV_PARAM_WDS,
|
|
WMI_10_4_VDEV_PARAM_ATIM_WINDOW,
|
|
WMI_10_4_VDEV_PARAM_BMISS_COUNT_MAX,
|
|
WMI_10_4_VDEV_PARAM_BMISS_FIRST_BCNT,
|
|
WMI_10_4_VDEV_PARAM_BMISS_FINAL_BCNT,
|
|
WMI_10_4_VDEV_PARAM_FEATURE_WMM,
|
|
WMI_10_4_VDEV_PARAM_CHWIDTH,
|
|
WMI_10_4_VDEV_PARAM_CHEXTOFFSET,
|
|
WMI_10_4_VDEV_PARAM_DISABLE_HTPROTECTION,
|
|
WMI_10_4_VDEV_PARAM_STA_QUICKKICKOUT,
|
|
WMI_10_4_VDEV_PARAM_MGMT_RATE,
|
|
WMI_10_4_VDEV_PARAM_PROTECTION_MODE,
|
|
WMI_10_4_VDEV_PARAM_FIXED_RATE,
|
|
WMI_10_4_VDEV_PARAM_SGI,
|
|
WMI_10_4_VDEV_PARAM_LDPC,
|
|
WMI_10_4_VDEV_PARAM_TX_STBC,
|
|
WMI_10_4_VDEV_PARAM_RX_STBC,
|
|
WMI_10_4_VDEV_PARAM_INTRA_BSS_FWD,
|
|
WMI_10_4_VDEV_PARAM_DEF_KEYID,
|
|
WMI_10_4_VDEV_PARAM_NSS,
|
|
WMI_10_4_VDEV_PARAM_BCAST_DATA_RATE,
|
|
WMI_10_4_VDEV_PARAM_MCAST_DATA_RATE,
|
|
WMI_10_4_VDEV_PARAM_MCAST_INDICATE,
|
|
WMI_10_4_VDEV_PARAM_DHCP_INDICATE,
|
|
WMI_10_4_VDEV_PARAM_UNKNOWN_DEST_INDICATE,
|
|
WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MIN_IDLE_INACTIVE_TIME_SECS,
|
|
WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_IDLE_INACTIVE_TIME_SECS,
|
|
WMI_10_4_VDEV_PARAM_AP_KEEPALIVE_MAX_UNRESPONSIVE_TIME_SECS,
|
|
WMI_10_4_VDEV_PARAM_AP_ENABLE_NAWDS,
|
|
WMI_10_4_VDEV_PARAM_MCAST2UCAST_SET,
|
|
WMI_10_4_VDEV_PARAM_ENABLE_RTSCTS,
|
|
WMI_10_4_VDEV_PARAM_RC_NUM_RETRIES,
|
|
WMI_10_4_VDEV_PARAM_TXBF,
|
|
WMI_10_4_VDEV_PARAM_PACKET_POWERSAVE,
|
|
WMI_10_4_VDEV_PARAM_DROP_UNENCRY,
|
|
WMI_10_4_VDEV_PARAM_TX_ENCAP_TYPE,
|
|
WMI_10_4_VDEV_PARAM_AP_DETECT_OUT_OF_SYNC_SLEEPING_STA_TIME_SECS,
|
|
WMI_10_4_VDEV_PARAM_CABQ_MAXDUR,
|
|
WMI_10_4_VDEV_PARAM_MFPTEST_SET,
|
|
WMI_10_4_VDEV_PARAM_RTS_FIXED_RATE,
|
|
WMI_10_4_VDEV_PARAM_VHT_SGIMASK,
|
|
WMI_10_4_VDEV_PARAM_VHT80_RATEMASK,
|
|
WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_ENABLE,
|
|
WMI_10_4_VDEV_PARAM_EARLY_RX_TGT_BMISS_NUM,
|
|
WMI_10_4_VDEV_PARAM_EARLY_RX_BMISS_SAMPLE_CYCLE,
|
|
WMI_10_4_VDEV_PARAM_EARLY_RX_SLOP_STEP,
|
|
WMI_10_4_VDEV_PARAM_EARLY_RX_INIT_SLOP,
|
|
WMI_10_4_VDEV_PARAM_EARLY_RX_ADJUST_PAUSE,
|
|
WMI_10_4_VDEV_PARAM_PROXY_STA,
|
|
WMI_10_4_VDEV_PARAM_MERU_VC,
|
|
WMI_10_4_VDEV_PARAM_RX_DECAP_TYPE,
|
|
WMI_10_4_VDEV_PARAM_BW_NSS_RATEMASK,
|
|
WMI_10_4_VDEV_PARAM_SENSOR_AP,
|
|
WMI_10_4_VDEV_PARAM_BEACON_RATE,
|
|
WMI_10_4_VDEV_PARAM_DTIM_ENABLE_CTS,
|
|
WMI_10_4_VDEV_PARAM_STA_KICKOUT,
|
|
WMI_10_4_VDEV_PARAM_CAPABILITIES,
|
|
WMI_10_4_VDEV_PARAM_TSF_INCREMENT,
|
|
WMI_10_4_VDEV_PARAM_RX_FILTER,
|
|
WMI_10_4_VDEV_PARAM_MGMT_TX_POWER,
|
|
WMI_10_4_VDEV_PARAM_ATF_SSID_SCHED_POLICY,
|
|
WMI_10_4_VDEV_PARAM_DISABLE_DYN_BW_RTS,
|
|
WMI_10_4_VDEV_PARAM_TSF_DECREMENT,
|
|
WMI_10_4_VDEV_PARAM_SELFGEN_FIXED_RATE,
|
|
WMI_10_4_VDEV_PARAM_AMPDU_SUBFRAME_SIZE_PER_AC,
|
|
WMI_10_4_VDEV_PARAM_NSS_VHT160,
|
|
WMI_10_4_VDEV_PARAM_NSS_VHT80_80,
|
|
WMI_10_4_VDEV_PARAM_AMSDU_SUBFRAME_SIZE_PER_AC,
|
|
WMI_10_4_VDEV_PARAM_DISABLE_CABQ,
|
|
WMI_10_4_VDEV_PARAM_SIFS_TRIGGER_RATE,
|
|
WMI_10_4_VDEV_PARAM_TX_POWER,
|
|
WMI_10_4_VDEV_PARAM_ENABLE_DISABLE_RTT_RESPONDER_ROLE,
|
|
WMI_10_4_VDEV_PARAM_DISABLE_4_ADDR_SRC_LRN,
|
|
};
|
|
|
|
#define WMI_VDEV_DISABLE_4_ADDR_SRC_LRN 1
|
|
|
|
#define WMI_VDEV_PARAM_TXBF_SU_TX_BFEE BIT(0)
|
|
#define WMI_VDEV_PARAM_TXBF_MU_TX_BFEE BIT(1)
|
|
#define WMI_VDEV_PARAM_TXBF_SU_TX_BFER BIT(2)
|
|
#define WMI_VDEV_PARAM_TXBF_MU_TX_BFER BIT(3)
|
|
|
|
#define WMI_TXBF_STS_CAP_OFFSET_LSB 4
|
|
#define WMI_TXBF_STS_CAP_OFFSET_MASK 0x70
|
|
#define WMI_TXBF_CONF_IMPLICIT_BF BIT(7)
|
|
#define WMI_BF_SOUND_DIM_OFFSET_LSB 8
|
|
#define WMI_BF_SOUND_DIM_OFFSET_MASK 0xf00
|
|
|
|
/* slot time long */
|
|
#define WMI_VDEV_SLOT_TIME_LONG 0x1
|
|
/* slot time short */
|
|
#define WMI_VDEV_SLOT_TIME_SHORT 0x2
|
|
/* preablbe long */
|
|
#define WMI_VDEV_PREAMBLE_LONG 0x1
|
|
/* preablbe short */
|
|
#define WMI_VDEV_PREAMBLE_SHORT 0x2
|
|
|
|
enum wmi_start_event_param {
|
|
WMI_VDEV_RESP_START_EVENT = 0,
|
|
WMI_VDEV_RESP_RESTART_EVENT,
|
|
};
|
|
|
|
struct wmi_vdev_start_response_event {
|
|
__le32 vdev_id;
|
|
__le32 req_id;
|
|
__le32 resp_type; /* %WMI_VDEV_RESP_ */
|
|
__le32 status;
|
|
} __packed;
|
|
|
|
struct wmi_vdev_standby_req_event {
|
|
/* unique id identifying the VDEV, generated by the caller */
|
|
__le32 vdev_id;
|
|
} __packed;
|
|
|
|
struct wmi_vdev_resume_req_event {
|
|
/* unique id identifying the VDEV, generated by the caller */
|
|
__le32 vdev_id;
|
|
} __packed;
|
|
|
|
struct wmi_vdev_stopped_event {
|
|
/* unique id identifying the VDEV, generated by the caller */
|
|
__le32 vdev_id;
|
|
} __packed;
|
|
|
|
/*
|
|
* common structure used for simple events
|
|
* (stopped, resume_req, standby response)
|
|
*/
|
|
struct wmi_vdev_simple_event {
|
|
/* unique id identifying the VDEV, generated by the caller */
|
|
__le32 vdev_id;
|
|
} __packed;
|
|
|
|
/* VDEV start response status codes */
|
|
/* VDEV successfully started */
|
|
#define WMI_INIFIED_VDEV_START_RESPONSE_STATUS_SUCCESS 0x0
|
|
|
|
/* requested VDEV not found */
|
|
#define WMI_INIFIED_VDEV_START_RESPONSE_INVALID_VDEVID 0x1
|
|
|
|
/* unsupported VDEV combination */
|
|
#define WMI_INIFIED_VDEV_START_RESPONSE_NOT_SUPPORTED 0x2
|
|
|
|
/* TODO: please add more comments if you have in-depth information */
|
|
struct wmi_vdev_spectral_conf_cmd {
|
|
__le32 vdev_id;
|
|
|
|
/* number of fft samples to send (0 for infinite) */
|
|
__le32 scan_count;
|
|
__le32 scan_period;
|
|
__le32 scan_priority;
|
|
|
|
/* number of bins in the FFT: 2^(fft_size - bin_scale) */
|
|
__le32 scan_fft_size;
|
|
__le32 scan_gc_ena;
|
|
__le32 scan_restart_ena;
|
|
__le32 scan_noise_floor_ref;
|
|
__le32 scan_init_delay;
|
|
__le32 scan_nb_tone_thr;
|
|
__le32 scan_str_bin_thr;
|
|
__le32 scan_wb_rpt_mode;
|
|
__le32 scan_rssi_rpt_mode;
|
|
__le32 scan_rssi_thr;
|
|
__le32 scan_pwr_format;
|
|
|
|
/* rpt_mode: Format of FFT report to software for spectral scan
|
|
* triggered FFTs:
|
|
* 0: No FFT report (only spectral scan summary report)
|
|
* 1: 2-dword summary of metrics for each completed FFT + spectral
|
|
* scan summary report
|
|
* 2: 2-dword summary of metrics for each completed FFT +
|
|
* 1x- oversampled bins(in-band) per FFT + spectral scan summary
|
|
* report
|
|
* 3: 2-dword summary of metrics for each completed FFT +
|
|
* 2x- oversampled bins (all) per FFT + spectral scan summary
|
|
*/
|
|
__le32 scan_rpt_mode;
|
|
__le32 scan_bin_scale;
|
|
__le32 scan_dbm_adj;
|
|
__le32 scan_chn_mask;
|
|
} __packed;
|
|
|
|
struct wmi_vdev_spectral_conf_arg {
|
|
u32 vdev_id;
|
|
u32 scan_count;
|
|
u32 scan_period;
|
|
u32 scan_priority;
|
|
u32 scan_fft_size;
|
|
u32 scan_gc_ena;
|
|
u32 scan_restart_ena;
|
|
u32 scan_noise_floor_ref;
|
|
u32 scan_init_delay;
|
|
u32 scan_nb_tone_thr;
|
|
u32 scan_str_bin_thr;
|
|
u32 scan_wb_rpt_mode;
|
|
u32 scan_rssi_rpt_mode;
|
|
u32 scan_rssi_thr;
|
|
u32 scan_pwr_format;
|
|
u32 scan_rpt_mode;
|
|
u32 scan_bin_scale;
|
|
u32 scan_dbm_adj;
|
|
u32 scan_chn_mask;
|
|
};
|
|
|
|
#define WMI_SPECTRAL_ENABLE_DEFAULT 0
|
|
#define WMI_SPECTRAL_COUNT_DEFAULT 0
|
|
#define WMI_SPECTRAL_PERIOD_DEFAULT 35
|
|
#define WMI_SPECTRAL_PRIORITY_DEFAULT 1
|
|
#define WMI_SPECTRAL_FFT_SIZE_DEFAULT 7
|
|
#define WMI_SPECTRAL_GC_ENA_DEFAULT 1
|
|
#define WMI_SPECTRAL_RESTART_ENA_DEFAULT 0
|
|
#define WMI_SPECTRAL_NOISE_FLOOR_REF_DEFAULT -96
|
|
#define WMI_SPECTRAL_INIT_DELAY_DEFAULT 80
|
|
#define WMI_SPECTRAL_NB_TONE_THR_DEFAULT 12
|
|
#define WMI_SPECTRAL_STR_BIN_THR_DEFAULT 8
|
|
#define WMI_SPECTRAL_WB_RPT_MODE_DEFAULT 0
|
|
#define WMI_SPECTRAL_RSSI_RPT_MODE_DEFAULT 0
|
|
#define WMI_SPECTRAL_RSSI_THR_DEFAULT 0xf0
|
|
#define WMI_SPECTRAL_PWR_FORMAT_DEFAULT 0
|
|
#define WMI_SPECTRAL_RPT_MODE_DEFAULT 2
|
|
#define WMI_SPECTRAL_BIN_SCALE_DEFAULT 1
|
|
#define WMI_SPECTRAL_DBM_ADJ_DEFAULT 1
|
|
#define WMI_SPECTRAL_CHN_MASK_DEFAULT 1
|
|
|
|
struct wmi_vdev_spectral_enable_cmd {
|
|
__le32 vdev_id;
|
|
__le32 trigger_cmd;
|
|
__le32 enable_cmd;
|
|
} __packed;
|
|
|
|
#define WMI_SPECTRAL_TRIGGER_CMD_TRIGGER 1
|
|
#define WMI_SPECTRAL_TRIGGER_CMD_CLEAR 2
|
|
#define WMI_SPECTRAL_ENABLE_CMD_ENABLE 1
|
|
#define WMI_SPECTRAL_ENABLE_CMD_DISABLE 2
|
|
|
|
/* Beacon processing related command and event structures */
|
|
struct wmi_bcn_tx_hdr {
|
|
__le32 vdev_id;
|
|
__le32 tx_rate;
|
|
__le32 tx_power;
|
|
__le32 bcn_len;
|
|
} __packed;
|
|
|
|
struct wmi_bcn_tx_cmd {
|
|
struct wmi_bcn_tx_hdr hdr;
|
|
u8 *bcn[0];
|
|
} __packed;
|
|
|
|
struct wmi_bcn_tx_arg {
|
|
u32 vdev_id;
|
|
u32 tx_rate;
|
|
u32 tx_power;
|
|
u32 bcn_len;
|
|
const void *bcn;
|
|
};
|
|
|
|
enum wmi_bcn_tx_ref_flags {
|
|
WMI_BCN_TX_REF_FLAG_DTIM_ZERO = 0x1,
|
|
WMI_BCN_TX_REF_FLAG_DELIVER_CAB = 0x2,
|
|
};
|
|
|
|
/* TODO: It is unclear why "no antenna" works while any other seemingly valid
|
|
* chainmask yields no beacons on the air at all.
|
|
*/
|
|
#define WMI_BCN_TX_REF_DEF_ANTENNA 0
|
|
|
|
struct wmi_bcn_tx_ref_cmd {
|
|
__le32 vdev_id;
|
|
__le32 data_len;
|
|
/* physical address of the frame - dma pointer */
|
|
__le32 data_ptr;
|
|
/* id for host to track */
|
|
__le32 msdu_id;
|
|
/* frame ctrl to setup PPDU desc */
|
|
__le32 frame_control;
|
|
/* to control CABQ traffic: WMI_BCN_TX_REF_FLAG_ */
|
|
__le32 flags;
|
|
/* introduced in 10.2 */
|
|
__le32 antenna_mask;
|
|
} __packed;
|
|
|
|
/* Beacon filter */
|
|
#define WMI_BCN_FILTER_ALL 0 /* Filter all beacons */
|
|
#define WMI_BCN_FILTER_NONE 1 /* Pass all beacons */
|
|
#define WMI_BCN_FILTER_RSSI 2 /* Pass Beacons RSSI >= RSSI threshold */
|
|
#define WMI_BCN_FILTER_BSSID 3 /* Pass Beacons with matching BSSID */
|
|
#define WMI_BCN_FILTER_SSID 4 /* Pass Beacons with matching SSID */
|
|
|
|
struct wmi_bcn_filter_rx_cmd {
|
|
/* Filter ID */
|
|
__le32 bcn_filter_id;
|
|
/* Filter type - wmi_bcn_filter */
|
|
__le32 bcn_filter;
|
|
/* Buffer len */
|
|
__le32 bcn_filter_len;
|
|
/* Filter info (threshold, BSSID, RSSI) */
|
|
u8 *bcn_filter_buf;
|
|
} __packed;
|
|
|
|
/* Capabilities and IEs to be passed to firmware */
|
|
struct wmi_bcn_prb_info {
|
|
/* Capabilities */
|
|
__le32 caps;
|
|
/* ERP info */
|
|
__le32 erp;
|
|
/* Advanced capabilities */
|
|
/* HT capabilities */
|
|
/* HT Info */
|
|
/* ibss_dfs */
|
|
/* wpa Info */
|
|
/* rsn Info */
|
|
/* rrm info */
|
|
/* ath_ext */
|
|
/* app IE */
|
|
} __packed;
|
|
|
|
struct wmi_bcn_tmpl_cmd {
|
|
/* unique id identifying the VDEV, generated by the caller */
|
|
__le32 vdev_id;
|
|
/* TIM IE offset from the beginning of the template. */
|
|
__le32 tim_ie_offset;
|
|
/* beacon probe capabilities and IEs */
|
|
struct wmi_bcn_prb_info bcn_prb_info;
|
|
/* beacon buffer length */
|
|
__le32 buf_len;
|
|
/* variable length data */
|
|
u8 data[1];
|
|
} __packed;
|
|
|
|
struct wmi_prb_tmpl_cmd {
|
|
/* unique id identifying the VDEV, generated by the caller */
|
|
__le32 vdev_id;
|
|
/* beacon probe capabilities and IEs */
|
|
struct wmi_bcn_prb_info bcn_prb_info;
|
|
/* beacon buffer length */
|
|
__le32 buf_len;
|
|
/* Variable length data */
|
|
u8 data[1];
|
|
} __packed;
|
|
|
|
enum wmi_sta_ps_mode {
|
|
/* enable power save for the given STA VDEV */
|
|
WMI_STA_PS_MODE_DISABLED = 0,
|
|
/* disable power save for a given STA VDEV */
|
|
WMI_STA_PS_MODE_ENABLED = 1,
|
|
};
|
|
|
|
struct wmi_sta_powersave_mode_cmd {
|
|
/* unique id identifying the VDEV, generated by the caller */
|
|
__le32 vdev_id;
|
|
|
|
/*
|
|
* Power save mode
|
|
* (see enum wmi_sta_ps_mode)
|
|
*/
|
|
__le32 sta_ps_mode;
|
|
} __packed;
|
|
|
|
enum wmi_csa_offload_en {
|
|
WMI_CSA_OFFLOAD_DISABLE = 0,
|
|
WMI_CSA_OFFLOAD_ENABLE = 1,
|
|
};
|
|
|
|
struct wmi_csa_offload_enable_cmd {
|
|
__le32 vdev_id;
|
|
__le32 csa_offload_enable;
|
|
} __packed;
|
|
|
|
struct wmi_csa_offload_chanswitch_cmd {
|
|
__le32 vdev_id;
|
|
struct wmi_channel chan;
|
|
} __packed;
|
|
|
|
/*
|
|
* This parameter controls the policy for retrieving frames from AP while the
|
|
* STA is in sleep state.
|
|
*
|
|
* Only takes affect if the sta_ps_mode is enabled
|
|
*/
|
|
enum wmi_sta_ps_param_rx_wake_policy {
|
|
/*
|
|
* Wake up when ever there is an RX activity on the VDEV. In this mode
|
|
* the Power save SM(state machine) will come out of sleep by either
|
|
* sending null frame (or) a data frame (with PS==0) in response to TIM
|
|
* bit set in the received beacon frame from AP.
|
|
*/
|
|
WMI_STA_PS_RX_WAKE_POLICY_WAKE = 0,
|
|
|
|
/*
|
|
* Here the power save state machine will not wakeup in response to TIM
|
|
* bit, instead it will send a PSPOLL (or) UASPD trigger based on UAPSD
|
|
* configuration setup by WMISET_PS_SET_UAPSD WMI command. When all
|
|
* access categories are delivery-enabled, the station will send a
|
|
* UAPSD trigger frame, otherwise it will send a PS-Poll.
|
|
*/
|
|
WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD = 1,
|
|
};
|
|
|
|
/*
|
|
* Number of tx frames/beacon that cause the power save SM to wake up.
|
|
*
|
|
* Value 1 causes the SM to wake up for every TX. Value 0 has a special
|
|
* meaning, It will cause the SM to never wake up. This is useful if you want
|
|
* to keep the system to sleep all the time for some kind of test mode . host
|
|
* can change this parameter any time. It will affect at the next tx frame.
|
|
*/
|
|
enum wmi_sta_ps_param_tx_wake_threshold {
|
|
WMI_STA_PS_TX_WAKE_THRESHOLD_NEVER = 0,
|
|
WMI_STA_PS_TX_WAKE_THRESHOLD_ALWAYS = 1,
|
|
|
|
/*
|
|
* Values greater than one indicate that many TX attempts per beacon
|
|
* interval before the STA will wake up
|
|
*/
|
|
};
|
|
|
|
/*
|
|
* The maximum number of PS-Poll frames the FW will send in response to
|
|
* traffic advertised in TIM before waking up (by sending a null frame with PS
|
|
* = 0). Value 0 has a special meaning: there is no maximum count and the FW
|
|
* will send as many PS-Poll as are necessary to retrieve buffered BU. This
|
|
* parameter is used when the RX wake policy is
|
|
* WMI_STA_PS_RX_WAKE_POLICY_POLL_UAPSD and ignored when the RX wake
|
|
* policy is WMI_STA_PS_RX_WAKE_POLICY_WAKE.
|
|
*/
|
|
enum wmi_sta_ps_param_pspoll_count {
|
|
WMI_STA_PS_PSPOLL_COUNT_NO_MAX = 0,
|
|
/*
|
|
* Values greater than 0 indicate the maximum numer of PS-Poll frames
|
|
* FW will send before waking up.
|
|
*/
|
|
|
|
/* When u-APSD is enabled the firmware will be very reluctant to exit
|
|
* STA PS. This could result in very poor Rx performance with STA doing
|
|
* PS-Poll for each and every buffered frame. This value is a bit
|
|
* arbitrary.
|
|
*/
|
|
WMI_STA_PS_PSPOLL_COUNT_UAPSD = 3,
|
|
};
|
|
|
|
/*
|
|
* This will include the delivery and trigger enabled state for every AC.
|
|
* This is the negotiated state with AP. The host MLME needs to set this based
|
|
* on AP capability and the state Set in the association request by the
|
|
* station MLME.Lower 8 bits of the value specify the UAPSD configuration.
|
|
*/
|
|
#define WMI_UAPSD_AC_TYPE_DELI 0
|
|
#define WMI_UAPSD_AC_TYPE_TRIG 1
|
|
|
|
#define WMI_UAPSD_AC_BIT_MASK(ac, type) \
|
|
(type == WMI_UAPSD_AC_TYPE_DELI ? 1 << (ac << 1) : 1 << ((ac << 1) + 1))
|
|
|
|
enum wmi_sta_ps_param_uapsd {
|
|
WMI_STA_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
|
|
WMI_STA_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1),
|
|
WMI_STA_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
|
|
WMI_STA_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3),
|
|
WMI_STA_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
|
|
WMI_STA_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5),
|
|
WMI_STA_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
|
|
WMI_STA_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7),
|
|
};
|
|
|
|
#define WMI_STA_UAPSD_MAX_INTERVAL_MSEC UINT_MAX
|
|
|
|
struct wmi_sta_uapsd_auto_trig_param {
|
|
__le32 wmm_ac;
|
|
__le32 user_priority;
|
|
__le32 service_interval;
|
|
__le32 suspend_interval;
|
|
__le32 delay_interval;
|
|
};
|
|
|
|
struct wmi_sta_uapsd_auto_trig_cmd_fixed_param {
|
|
__le32 vdev_id;
|
|
struct wmi_mac_addr peer_macaddr;
|
|
__le32 num_ac;
|
|
};
|
|
|
|
struct wmi_sta_uapsd_auto_trig_arg {
|
|
u32 wmm_ac;
|
|
u32 user_priority;
|
|
u32 service_interval;
|
|
u32 suspend_interval;
|
|
u32 delay_interval;
|
|
};
|
|
|
|
enum wmi_sta_powersave_param {
|
|
/*
|
|
* Controls how frames are retrievd from AP while STA is sleeping
|
|
*
|
|
* (see enum wmi_sta_ps_param_rx_wake_policy)
|
|
*/
|
|
WMI_STA_PS_PARAM_RX_WAKE_POLICY = 0,
|
|
|
|
/*
|
|
* The STA will go active after this many TX
|
|
*
|
|
* (see enum wmi_sta_ps_param_tx_wake_threshold)
|
|
*/
|
|
WMI_STA_PS_PARAM_TX_WAKE_THRESHOLD = 1,
|
|
|
|
/*
|
|
* Number of PS-Poll to send before STA wakes up
|
|
*
|
|
* (see enum wmi_sta_ps_param_pspoll_count)
|
|
*
|
|
*/
|
|
WMI_STA_PS_PARAM_PSPOLL_COUNT = 2,
|
|
|
|
/*
|
|
* TX/RX inactivity time in msec before going to sleep.
|
|
*
|
|
* The power save SM will monitor tx/rx activity on the VDEV, if no
|
|
* activity for the specified msec of the parameter the Power save
|
|
* SM will go to sleep.
|
|
*/
|
|
WMI_STA_PS_PARAM_INACTIVITY_TIME = 3,
|
|
|
|
/*
|
|
* Set uapsd configuration.
|
|
*
|
|
* (see enum wmi_sta_ps_param_uapsd)
|
|
*/
|
|
WMI_STA_PS_PARAM_UAPSD = 4,
|
|
};
|
|
|
|
struct wmi_sta_powersave_param_cmd {
|
|
__le32 vdev_id;
|
|
__le32 param_id; /* %WMI_STA_PS_PARAM_ */
|
|
__le32 param_value;
|
|
} __packed;
|
|
|
|
/* No MIMO power save */
|
|
#define WMI_STA_MIMO_PS_MODE_DISABLE
|
|
/* mimo powersave mode static*/
|
|
#define WMI_STA_MIMO_PS_MODE_STATIC
|
|
/* mimo powersave mode dynamic */
|
|
#define WMI_STA_MIMO_PS_MODE_DYNAMIC
|
|
|
|
struct wmi_sta_mimo_ps_mode_cmd {
|
|
/* unique id identifying the VDEV, generated by the caller */
|
|
__le32 vdev_id;
|
|
/* mimo powersave mode as defined above */
|
|
__le32 mimo_pwrsave_mode;
|
|
} __packed;
|
|
|
|
/* U-APSD configuration of peer station from (re)assoc request and TSPECs */
|
|
enum wmi_ap_ps_param_uapsd {
|
|
WMI_AP_PS_UAPSD_AC0_DELIVERY_EN = (1 << 0),
|
|
WMI_AP_PS_UAPSD_AC0_TRIGGER_EN = (1 << 1),
|
|
WMI_AP_PS_UAPSD_AC1_DELIVERY_EN = (1 << 2),
|
|
WMI_AP_PS_UAPSD_AC1_TRIGGER_EN = (1 << 3),
|
|
WMI_AP_PS_UAPSD_AC2_DELIVERY_EN = (1 << 4),
|
|
WMI_AP_PS_UAPSD_AC2_TRIGGER_EN = (1 << 5),
|
|
WMI_AP_PS_UAPSD_AC3_DELIVERY_EN = (1 << 6),
|
|
WMI_AP_PS_UAPSD_AC3_TRIGGER_EN = (1 << 7),
|
|
};
|
|
|
|
/* U-APSD maximum service period of peer station */
|
|
enum wmi_ap_ps_peer_param_max_sp {
|
|
WMI_AP_PS_PEER_PARAM_MAX_SP_UNLIMITED = 0,
|
|
WMI_AP_PS_PEER_PARAM_MAX_SP_2 = 1,
|
|
WMI_AP_PS_PEER_PARAM_MAX_SP_4 = 2,
|
|
WMI_AP_PS_PEER_PARAM_MAX_SP_6 = 3,
|
|
MAX_WMI_AP_PS_PEER_PARAM_MAX_SP,
|
|
};
|
|
|
|
/*
|
|
* AP power save parameter
|
|
* Set a power save specific parameter for a peer station
|
|
*/
|
|
enum wmi_ap_ps_peer_param {
|
|
/* Set uapsd configuration for a given peer.
|
|
*
|
|
* Include the delivery and trigger enabled state for every AC.
|
|
* The host MLME needs to set this based on AP capability and stations
|
|
* request Set in the association request received from the station.
|
|
*
|
|
* Lower 8 bits of the value specify the UAPSD configuration.
|
|
*
|
|
* (see enum wmi_ap_ps_param_uapsd)
|
|
* The default value is 0.
|
|
*/
|
|
WMI_AP_PS_PEER_PARAM_UAPSD = 0,
|
|
|
|
/*
|
|
* Set the service period for a UAPSD capable station
|
|
*
|
|
* The service period from wme ie in the (re)assoc request frame.
|
|
*
|
|
* (see enum wmi_ap_ps_peer_param_max_sp)
|
|
*/
|
|
WMI_AP_PS_PEER_PARAM_MAX_SP = 1,
|
|
|
|
/* Time in seconds for aging out buffered frames for STA in PS */
|
|
WMI_AP_PS_PEER_PARAM_AGEOUT_TIME = 2,
|
|
};
|
|
|
|
struct wmi_ap_ps_peer_cmd {
|
|
/* unique id identifying the VDEV, generated by the caller */
|
|
__le32 vdev_id;
|
|
|
|
/* peer MAC address */
|
|
struct wmi_mac_addr peer_macaddr;
|
|
|
|
/* AP powersave param (see enum wmi_ap_ps_peer_param) */
|
|
__le32 param_id;
|
|
|
|
/* AP powersave param value */
|
|
__le32 param_value;
|
|
} __packed;
|
|
|
|
/* 128 clients = 4 words */
|
|
#define WMI_TIM_BITMAP_ARRAY_SIZE 4
|
|
|
|
struct wmi_tim_info {
|
|
__le32 tim_len;
|
|
__le32 tim_mcast;
|
|
__le32 tim_bitmap[WMI_TIM_BITMAP_ARRAY_SIZE];
|
|
__le32 tim_changed;
|
|
__le32 tim_num_ps_pending;
|
|
} __packed;
|
|
|
|
struct wmi_tim_info_arg {
|
|
__le32 tim_len;
|
|
__le32 tim_mcast;
|
|
const __le32 *tim_bitmap;
|
|
__le32 tim_changed;
|
|
__le32 tim_num_ps_pending;
|
|
} __packed;
|
|
|
|
/* Maximum number of NOA Descriptors supported */
|
|
#define WMI_P2P_MAX_NOA_DESCRIPTORS 4
|
|
#define WMI_P2P_OPPPS_ENABLE_BIT BIT(0)
|
|
#define WMI_P2P_OPPPS_CTWINDOW_OFFSET 1
|
|
#define WMI_P2P_NOA_CHANGED_BIT BIT(0)
|
|
|
|
struct wmi_p2p_noa_info {
|
|
/* Bit 0 - Flag to indicate an update in NOA schedule
|
|
* Bits 7-1 - Reserved
|
|
*/
|
|
u8 changed;
|
|
/* NOA index */
|
|
u8 index;
|
|
/* Bit 0 - Opp PS state of the AP
|
|
* Bits 1-7 - Ctwindow in TUs
|
|
*/
|
|
u8 ctwindow_oppps;
|
|
/* Number of NOA descriptors */
|
|
u8 num_descriptors;
|
|
|
|
struct wmi_p2p_noa_descriptor descriptors[WMI_P2P_MAX_NOA_DESCRIPTORS];
|
|
} __packed;
|
|
|
|
struct wmi_bcn_info {
|
|
struct wmi_tim_info tim_info;
|
|
struct wmi_p2p_noa_info p2p_noa_info;
|
|
} __packed;
|
|
|
|
struct wmi_host_swba_event {
|
|
__le32 vdev_map;
|
|
struct wmi_bcn_info bcn_info[0];
|
|
} __packed;
|
|
|
|
struct wmi_10_2_4_bcn_info {
|
|
struct wmi_tim_info tim_info;
|
|
/* The 10.2.4 FW doesn't have p2p NOA info */
|
|
} __packed;
|
|
|
|
struct wmi_10_2_4_host_swba_event {
|
|
__le32 vdev_map;
|
|
struct wmi_10_2_4_bcn_info bcn_info[0];
|
|
} __packed;
|
|
|
|
/* 16 words = 512 client + 1 word = for guard */
|
|
#define WMI_10_4_TIM_BITMAP_ARRAY_SIZE 17
|
|
|
|
struct wmi_10_4_tim_info {
|
|
__le32 tim_len;
|
|
__le32 tim_mcast;
|
|
__le32 tim_bitmap[WMI_10_4_TIM_BITMAP_ARRAY_SIZE];
|
|
__le32 tim_changed;
|
|
__le32 tim_num_ps_pending;
|
|
} __packed;
|
|
|
|
#define WMI_10_4_P2P_MAX_NOA_DESCRIPTORS 1
|
|
|
|
struct wmi_10_4_p2p_noa_info {
|
|
/* Bit 0 - Flag to indicate an update in NOA schedule
|
|
* Bits 7-1 - Reserved
|
|
*/
|
|
u8 changed;
|
|
/* NOA index */
|
|
u8 index;
|
|
/* Bit 0 - Opp PS state of the AP
|
|
* Bits 1-7 - Ctwindow in TUs
|
|
*/
|
|
u8 ctwindow_oppps;
|
|
/* Number of NOA descriptors */
|
|
u8 num_descriptors;
|
|
|
|
struct wmi_p2p_noa_descriptor
|
|
noa_descriptors[WMI_10_4_P2P_MAX_NOA_DESCRIPTORS];
|
|
} __packed;
|
|
|
|
struct wmi_10_4_bcn_info {
|
|
struct wmi_10_4_tim_info tim_info;
|
|
struct wmi_10_4_p2p_noa_info p2p_noa_info;
|
|
} __packed;
|
|
|
|
struct wmi_10_4_host_swba_event {
|
|
__le32 vdev_map;
|
|
struct wmi_10_4_bcn_info bcn_info[0];
|
|
} __packed;
|
|
|
|
#define WMI_MAX_AP_VDEV 16
|
|
|
|
struct wmi_tbtt_offset_event {
|
|
__le32 vdev_map;
|
|
__le32 tbttoffset_list[WMI_MAX_AP_VDEV];
|
|
} __packed;
|
|
|
|
struct wmi_peer_create_cmd {
|
|
__le32 vdev_id;
|
|
struct wmi_mac_addr peer_macaddr;
|
|
__le32 peer_type;
|
|
} __packed;
|
|
|
|
enum wmi_peer_type {
|
|
WMI_PEER_TYPE_DEFAULT = 0,
|
|
WMI_PEER_TYPE_BSS = 1,
|
|
WMI_PEER_TYPE_TDLS = 2,
|
|
};
|
|
|
|
struct wmi_peer_delete_cmd {
|
|
__le32 vdev_id;
|
|
struct wmi_mac_addr peer_macaddr;
|
|
} __packed;
|
|
|
|
struct wmi_peer_flush_tids_cmd {
|
|
__le32 vdev_id;
|
|
struct wmi_mac_addr peer_macaddr;
|
|
__le32 peer_tid_bitmap;
|
|
} __packed;
|
|
|
|
struct wmi_fixed_rate {
|
|
/*
|
|
* rate mode . 0: disable fixed rate (auto rate)
|
|
* 1: legacy (non 11n) rate specified as ieee rate 2*Mbps
|
|
* 2: ht20 11n rate specified as mcs index
|
|
* 3: ht40 11n rate specified as mcs index
|
|
*/
|
|
__le32 rate_mode;
|
|
/*
|
|
* 4 rate values for 4 rate series. series 0 is stored in byte 0 (LSB)
|
|
* and series 3 is stored at byte 3 (MSB)
|
|
*/
|
|
__le32 rate_series;
|
|
/*
|
|
* 4 retry counts for 4 rate series. retry count for rate 0 is stored
|
|
* in byte 0 (LSB) and retry count for rate 3 is stored at byte 3
|
|
* (MSB)
|
|
*/
|
|
__le32 rate_retries;
|
|
} __packed;
|
|
|
|
struct wmi_peer_fixed_rate_cmd {
|
|
/* unique id identifying the VDEV, generated by the caller */
|
|
__le32 vdev_id;
|
|
/* peer MAC address */
|
|
struct wmi_mac_addr peer_macaddr;
|
|
/* fixed rate */
|
|
struct wmi_fixed_rate peer_fixed_rate;
|
|
} __packed;
|
|
|
|
#define WMI_MGMT_TID 17
|
|
|
|
struct wmi_addba_clear_resp_cmd {
|
|
/* unique id identifying the VDEV, generated by the caller */
|
|
__le32 vdev_id;
|
|
/* peer MAC address */
|
|
struct wmi_mac_addr peer_macaddr;
|
|
} __packed;
|
|
|
|
struct wmi_addba_send_cmd {
|
|
/* unique id identifying the VDEV, generated by the caller */
|
|
__le32 vdev_id;
|
|
/* peer MAC address */
|
|
struct wmi_mac_addr peer_macaddr;
|
|
/* Tid number */
|
|
__le32 tid;
|
|
/* Buffer/Window size*/
|
|
__le32 buffersize;
|
|
} __packed;
|
|
|
|
struct wmi_delba_send_cmd {
|
|
/* unique id identifying the VDEV, generated by the caller */
|
|
__le32 vdev_id;
|
|
/* peer MAC address */
|
|
struct wmi_mac_addr peer_macaddr;
|
|
/* Tid number */
|
|
__le32 tid;
|
|
/* Is Initiator */
|
|
__le32 initiator;
|
|
/* Reason code */
|
|
__le32 reasoncode;
|
|
} __packed;
|
|
|
|
struct wmi_addba_setresponse_cmd {
|
|
/* unique id identifying the vdev, generated by the caller */
|
|
__le32 vdev_id;
|
|
/* peer mac address */
|
|
struct wmi_mac_addr peer_macaddr;
|
|
/* Tid number */
|
|
__le32 tid;
|
|
/* status code */
|
|
__le32 statuscode;
|
|
} __packed;
|
|
|
|
struct wmi_send_singleamsdu_cmd {
|
|
/* unique id identifying the vdev, generated by the caller */
|
|
__le32 vdev_id;
|
|
/* peer mac address */
|
|
struct wmi_mac_addr peer_macaddr;
|
|
/* Tid number */
|
|
__le32 tid;
|
|
} __packed;
|
|
|
|
enum wmi_peer_smps_state {
|
|
WMI_PEER_SMPS_PS_NONE = 0x0,
|
|
WMI_PEER_SMPS_STATIC = 0x1,
|
|
WMI_PEER_SMPS_DYNAMIC = 0x2
|
|
};
|
|
|
|
enum wmi_peer_chwidth {
|
|
WMI_PEER_CHWIDTH_20MHZ = 0,
|
|
WMI_PEER_CHWIDTH_40MHZ = 1,
|
|
WMI_PEER_CHWIDTH_80MHZ = 2,
|
|
WMI_PEER_CHWIDTH_160MHZ = 3,
|
|
};
|
|
|
|
enum wmi_peer_param {
|
|
WMI_PEER_SMPS_STATE = 0x1, /* see %wmi_peer_smps_state */
|
|
WMI_PEER_AMPDU = 0x2,
|
|
WMI_PEER_AUTHORIZE = 0x3,
|
|
WMI_PEER_CHAN_WIDTH = 0x4,
|
|
WMI_PEER_NSS = 0x5,
|
|
WMI_PEER_USE_4ADDR = 0x6,
|
|
WMI_PEER_USE_FIXED_PWR = 0x8,
|
|
WMI_PEER_PARAM_FIXED_RATE = 0x9,
|
|
WMI_PEER_DEBUG = 0xa,
|
|
WMI_PEER_PHYMODE = 0xd,
|
|
WMI_PEER_DUMMY_VAR = 0xff, /* dummy parameter for STA PS workaround */
|
|
};
|
|
|
|
struct wmi_peer_set_param_cmd {
|
|
__le32 vdev_id;
|
|
struct wmi_mac_addr peer_macaddr;
|
|
__le32 param_id;
|
|
__le32 param_value;
|
|
} __packed;
|
|
|
|
#define MAX_SUPPORTED_RATES 128
|
|
|
|
struct wmi_rate_set {
|
|
/* total number of rates */
|
|
__le32 num_rates;
|
|
/*
|
|
* rates (each 8bit value) packed into a 32 bit word.
|
|
* the rates are filled from least significant byte to most
|
|
* significant byte.
|
|
*/
|
|
__le32 rates[(MAX_SUPPORTED_RATES / 4) + 1];
|
|
} __packed;
|
|
|
|
struct wmi_rate_set_arg {
|
|
unsigned int num_rates;
|
|
u8 rates[MAX_SUPPORTED_RATES];
|
|
};
|
|
|
|
/*
|
|
* NOTE: It would bea good idea to represent the Tx MCS
|
|
* info in one word and Rx in another word. This is split
|
|
* into multiple words for convenience
|
|
*/
|
|
struct wmi_vht_rate_set {
|
|
__le32 rx_max_rate; /* Max Rx data rate */
|
|
__le32 rx_mcs_set; /* Negotiated RX VHT rates */
|
|
__le32 tx_max_rate; /* Max Tx data rate */
|
|
__le32 tx_mcs_set; /* Negotiated TX VHT rates */
|
|
} __packed;
|
|
|
|
struct wmi_vht_rate_set_arg {
|
|
u32 rx_max_rate;
|
|
u32 rx_mcs_set;
|
|
u32 tx_max_rate;
|
|
u32 tx_mcs_set;
|
|
};
|
|
|
|
struct wmi_peer_set_rates_cmd {
|
|
/* peer MAC address */
|
|
struct wmi_mac_addr peer_macaddr;
|
|
/* legacy rate set */
|
|
struct wmi_rate_set peer_legacy_rates;
|
|
/* ht rate set */
|
|
struct wmi_rate_set peer_ht_rates;
|
|
} __packed;
|
|
|
|
struct wmi_peer_set_q_empty_callback_cmd {
|
|
/* unique id identifying the VDEV, generated by the caller */
|
|
__le32 vdev_id;
|
|
/* peer MAC address */
|
|
struct wmi_mac_addr peer_macaddr;
|
|
__le32 callback_enable;
|
|
} __packed;
|
|
|
|
struct wmi_peer_flags_map {
|
|
u32 auth;
|
|
u32 qos;
|
|
u32 need_ptk_4_way;
|
|
u32 need_gtk_2_way;
|
|
u32 apsd;
|
|
u32 ht;
|
|
u32 bw40;
|
|
u32 stbc;
|
|
u32 ldbc;
|
|
u32 dyn_mimops;
|
|
u32 static_mimops;
|
|
u32 spatial_mux;
|
|
u32 vht;
|
|
u32 bw80;
|
|
u32 vht_2g;
|
|
u32 pmf;
|
|
u32 bw160;
|
|
};
|
|
|
|
enum wmi_peer_flags {
|
|
WMI_PEER_AUTH = 0x00000001,
|
|
WMI_PEER_QOS = 0x00000002,
|
|
WMI_PEER_NEED_PTK_4_WAY = 0x00000004,
|
|
WMI_PEER_NEED_GTK_2_WAY = 0x00000010,
|
|
WMI_PEER_APSD = 0x00000800,
|
|
WMI_PEER_HT = 0x00001000,
|
|
WMI_PEER_40MHZ = 0x00002000,
|
|
WMI_PEER_STBC = 0x00008000,
|
|
WMI_PEER_LDPC = 0x00010000,
|
|
WMI_PEER_DYN_MIMOPS = 0x00020000,
|
|
WMI_PEER_STATIC_MIMOPS = 0x00040000,
|
|
WMI_PEER_SPATIAL_MUX = 0x00200000,
|
|
WMI_PEER_VHT = 0x02000000,
|
|
WMI_PEER_80MHZ = 0x04000000,
|
|
WMI_PEER_VHT_2G = 0x08000000,
|
|
WMI_PEER_PMF = 0x10000000,
|
|
WMI_PEER_160MHZ = 0x20000000
|
|
};
|
|
|
|
enum wmi_10x_peer_flags {
|
|
WMI_10X_PEER_AUTH = 0x00000001,
|
|
WMI_10X_PEER_QOS = 0x00000002,
|
|
WMI_10X_PEER_NEED_PTK_4_WAY = 0x00000004,
|
|
WMI_10X_PEER_NEED_GTK_2_WAY = 0x00000010,
|
|
WMI_10X_PEER_APSD = 0x00000800,
|
|
WMI_10X_PEER_HT = 0x00001000,
|
|
WMI_10X_PEER_40MHZ = 0x00002000,
|
|
WMI_10X_PEER_STBC = 0x00008000,
|
|
WMI_10X_PEER_LDPC = 0x00010000,
|
|
WMI_10X_PEER_DYN_MIMOPS = 0x00020000,
|
|
WMI_10X_PEER_STATIC_MIMOPS = 0x00040000,
|
|
WMI_10X_PEER_SPATIAL_MUX = 0x00200000,
|
|
WMI_10X_PEER_VHT = 0x02000000,
|
|
WMI_10X_PEER_80MHZ = 0x04000000,
|
|
WMI_10X_PEER_160MHZ = 0x20000000
|
|
};
|
|
|
|
enum wmi_10_2_peer_flags {
|
|
WMI_10_2_PEER_AUTH = 0x00000001,
|
|
WMI_10_2_PEER_QOS = 0x00000002,
|
|
WMI_10_2_PEER_NEED_PTK_4_WAY = 0x00000004,
|
|
WMI_10_2_PEER_NEED_GTK_2_WAY = 0x00000010,
|
|
WMI_10_2_PEER_APSD = 0x00000800,
|
|
WMI_10_2_PEER_HT = 0x00001000,
|
|
WMI_10_2_PEER_40MHZ = 0x00002000,
|
|
WMI_10_2_PEER_STBC = 0x00008000,
|
|
WMI_10_2_PEER_LDPC = 0x00010000,
|
|
WMI_10_2_PEER_DYN_MIMOPS = 0x00020000,
|
|
WMI_10_2_PEER_STATIC_MIMOPS = 0x00040000,
|
|
WMI_10_2_PEER_SPATIAL_MUX = 0x00200000,
|
|
WMI_10_2_PEER_VHT = 0x02000000,
|
|
WMI_10_2_PEER_80MHZ = 0x04000000,
|
|
WMI_10_2_PEER_VHT_2G = 0x08000000,
|
|
WMI_10_2_PEER_PMF = 0x10000000,
|
|
WMI_10_2_PEER_160MHZ = 0x20000000
|
|
};
|
|
|
|
/*
|
|
* Peer rate capabilities.
|
|
*
|
|
* This is of interest to the ratecontrol
|
|
* module which resides in the firmware. The bit definitions are
|
|
* consistent with that defined in if_athrate.c.
|
|
*/
|
|
#define WMI_RC_DS_FLAG 0x01
|
|
#define WMI_RC_CW40_FLAG 0x02
|
|
#define WMI_RC_SGI_FLAG 0x04
|
|
#define WMI_RC_HT_FLAG 0x08
|
|
#define WMI_RC_RTSCTS_FLAG 0x10
|
|
#define WMI_RC_TX_STBC_FLAG 0x20
|
|
#define WMI_RC_RX_STBC_FLAG 0xC0
|
|
#define WMI_RC_RX_STBC_FLAG_S 6
|
|
#define WMI_RC_WEP_TKIP_FLAG 0x100
|
|
#define WMI_RC_TS_FLAG 0x200
|
|
#define WMI_RC_UAPSD_FLAG 0x400
|
|
|
|
/* Maximum listen interval supported by hw in units of beacon interval */
|
|
#define ATH10K_MAX_HW_LISTEN_INTERVAL 5
|
|
|
|
struct wmi_common_peer_assoc_complete_cmd {
|
|
struct wmi_mac_addr peer_macaddr;
|
|
__le32 vdev_id;
|
|
__le32 peer_new_assoc; /* 1=assoc, 0=reassoc */
|
|
__le32 peer_associd; /* 16 LSBs */
|
|
__le32 peer_flags;
|
|
__le32 peer_caps; /* 16 LSBs */
|
|
__le32 peer_listen_intval;
|
|
__le32 peer_ht_caps;
|
|
__le32 peer_max_mpdu;
|
|
__le32 peer_mpdu_density; /* 0..16 */
|
|
__le32 peer_rate_caps;
|
|
struct wmi_rate_set peer_legacy_rates;
|
|
struct wmi_rate_set peer_ht_rates;
|
|
__le32 peer_nss; /* num of spatial streams */
|
|
__le32 peer_vht_caps;
|
|
__le32 peer_phymode;
|
|
struct wmi_vht_rate_set peer_vht_rates;
|
|
};
|
|
|
|
struct wmi_main_peer_assoc_complete_cmd {
|
|
struct wmi_common_peer_assoc_complete_cmd cmd;
|
|
|
|
/* HT Operation Element of the peer. Five bytes packed in 2
|
|
* INT32 array and filled from lsb to msb.
|
|
*/
|
|
__le32 peer_ht_info[2];
|
|
} __packed;
|
|
|
|
struct wmi_10_1_peer_assoc_complete_cmd {
|
|
struct wmi_common_peer_assoc_complete_cmd cmd;
|
|
} __packed;
|
|
|
|
#define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_LSB 0
|
|
#define WMI_PEER_ASSOC_INFO0_MAX_MCS_IDX_MASK 0x0f
|
|
#define WMI_PEER_ASSOC_INFO0_MAX_NSS_LSB 4
|
|
#define WMI_PEER_ASSOC_INFO0_MAX_NSS_MASK 0xf0
|
|
|
|
struct wmi_10_2_peer_assoc_complete_cmd {
|
|
struct wmi_common_peer_assoc_complete_cmd cmd;
|
|
__le32 info0; /* WMI_PEER_ASSOC_INFO0_ */
|
|
} __packed;
|
|
|
|
#define PEER_BW_RXNSS_OVERRIDE_OFFSET 31
|
|
|
|
struct wmi_10_4_peer_assoc_complete_cmd {
|
|
struct wmi_10_2_peer_assoc_complete_cmd cmd;
|
|
__le32 peer_bw_rxnss_override;
|
|
} __packed;
|
|
|
|
struct wmi_peer_assoc_complete_arg {
|
|
u8 addr[ETH_ALEN];
|
|
u32 vdev_id;
|
|
bool peer_reassoc;
|
|
u16 peer_aid;
|
|
u32 peer_flags; /* see %WMI_PEER_ */
|
|
u16 peer_caps;
|
|
u32 peer_listen_intval;
|
|
u32 peer_ht_caps;
|
|
u32 peer_max_mpdu;
|
|
u32 peer_mpdu_density; /* 0..16 */
|
|
u32 peer_rate_caps; /* see %WMI_RC_ */
|
|
struct wmi_rate_set_arg peer_legacy_rates;
|
|
struct wmi_rate_set_arg peer_ht_rates;
|
|
u32 peer_num_spatial_streams;
|
|
u32 peer_vht_caps;
|
|
enum wmi_phy_mode peer_phymode;
|
|
struct wmi_vht_rate_set_arg peer_vht_rates;
|
|
u32 peer_bw_rxnss_override;
|
|
};
|
|
|
|
struct wmi_peer_add_wds_entry_cmd {
|
|
/* peer MAC address */
|
|
struct wmi_mac_addr peer_macaddr;
|
|
/* wds MAC addr */
|
|
struct wmi_mac_addr wds_macaddr;
|
|
} __packed;
|
|
|
|
struct wmi_peer_remove_wds_entry_cmd {
|
|
/* wds MAC addr */
|
|
struct wmi_mac_addr wds_macaddr;
|
|
} __packed;
|
|
|
|
struct wmi_peer_q_empty_callback_event {
|
|
/* peer MAC address */
|
|
struct wmi_mac_addr peer_macaddr;
|
|
} __packed;
|
|
|
|
/*
|
|
* Channel info WMI event
|
|
*/
|
|
struct wmi_chan_info_event {
|
|
__le32 err_code;
|
|
__le32 freq;
|
|
__le32 cmd_flags;
|
|
__le32 noise_floor;
|
|
__le32 rx_clear_count;
|
|
__le32 cycle_count;
|
|
} __packed;
|
|
|
|
struct wmi_10_4_chan_info_event {
|
|
__le32 err_code;
|
|
__le32 freq;
|
|
__le32 cmd_flags;
|
|
__le32 noise_floor;
|
|
__le32 rx_clear_count;
|
|
__le32 cycle_count;
|
|
__le32 chan_tx_pwr_range;
|
|
__le32 chan_tx_pwr_tp;
|
|
__le32 rx_frame_count;
|
|
} __packed;
|
|
|
|
struct wmi_peer_sta_kickout_event {
|
|
struct wmi_mac_addr peer_macaddr;
|
|
} __packed;
|
|
|
|
#define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
|
|
#define WMI_CHAN_INFO_FLAG_PRE_COMPLETE BIT(1)
|
|
|
|
/* Beacon filter wmi command info */
|
|
#define BCN_FLT_MAX_SUPPORTED_IES 256
|
|
#define BCN_FLT_MAX_ELEMS_IE_LIST (BCN_FLT_MAX_SUPPORTED_IES / 32)
|
|
|
|
struct bss_bcn_stats {
|
|
__le32 vdev_id;
|
|
__le32 bss_bcnsdropped;
|
|
__le32 bss_bcnsdelivered;
|
|
} __packed;
|
|
|
|
struct bcn_filter_stats {
|
|
__le32 bcns_dropped;
|
|
__le32 bcns_delivered;
|
|
__le32 activefilters;
|
|
struct bss_bcn_stats bss_stats;
|
|
} __packed;
|
|
|
|
struct wmi_add_bcn_filter_cmd {
|
|
u32 vdev_id;
|
|
u32 ie_map[BCN_FLT_MAX_ELEMS_IE_LIST];
|
|
} __packed;
|
|
|
|
enum wmi_sta_keepalive_method {
|
|
WMI_STA_KEEPALIVE_METHOD_NULL_FRAME = 1,
|
|
WMI_STA_KEEPALIVE_METHOD_UNSOLICITATED_ARP_RESPONSE = 2,
|
|
};
|
|
|
|
#define WMI_STA_KEEPALIVE_INTERVAL_DISABLE 0
|
|
|
|
/* Firmware crashes if keepalive interval exceeds this limit */
|
|
#define WMI_STA_KEEPALIVE_INTERVAL_MAX_SECONDS 0xffff
|
|
|
|
/* note: ip4 addresses are in network byte order, i.e. big endian */
|
|
struct wmi_sta_keepalive_arp_resp {
|
|
__be32 src_ip4_addr;
|
|
__be32 dest_ip4_addr;
|
|
struct wmi_mac_addr dest_mac_addr;
|
|
} __packed;
|
|
|
|
struct wmi_sta_keepalive_cmd {
|
|
__le32 vdev_id;
|
|
__le32 enabled;
|
|
__le32 method; /* WMI_STA_KEEPALIVE_METHOD_ */
|
|
__le32 interval; /* in seconds */
|
|
struct wmi_sta_keepalive_arp_resp arp_resp;
|
|
} __packed;
|
|
|
|
struct wmi_sta_keepalive_arg {
|
|
u32 vdev_id;
|
|
u32 enabled;
|
|
u32 method;
|
|
u32 interval;
|
|
__be32 src_ip4_addr;
|
|
__be32 dest_ip4_addr;
|
|
const u8 dest_mac_addr[ETH_ALEN];
|
|
};
|
|
|
|
enum wmi_force_fw_hang_type {
|
|
WMI_FORCE_FW_HANG_ASSERT = 1,
|
|
WMI_FORCE_FW_HANG_NO_DETECT,
|
|
WMI_FORCE_FW_HANG_CTRL_EP_FULL,
|
|
WMI_FORCE_FW_HANG_EMPTY_POINT,
|
|
WMI_FORCE_FW_HANG_STACK_OVERFLOW,
|
|
WMI_FORCE_FW_HANG_INFINITE_LOOP,
|
|
};
|
|
|
|
#define WMI_FORCE_FW_HANG_RANDOM_TIME 0xFFFFFFFF
|
|
|
|
struct wmi_force_fw_hang_cmd {
|
|
__le32 type;
|
|
__le32 delay_ms;
|
|
} __packed;
|
|
|
|
enum wmi_pdev_reset_mode_type {
|
|
WMI_RST_MODE_TX_FLUSH = 1,
|
|
WMI_RST_MODE_WARM_RESET,
|
|
WMI_RST_MODE_COLD_RESET,
|
|
WMI_RST_MODE_WARM_RESET_RESTORE_CAL,
|
|
WMI_RST_MODE_COLD_RESET_RESTORE_CAL,
|
|
WMI_RST_MODE_MAX,
|
|
};
|
|
|
|
enum ath10k_dbglog_level {
|
|
ATH10K_DBGLOG_LEVEL_VERBOSE = 0,
|
|
ATH10K_DBGLOG_LEVEL_INFO = 1,
|
|
ATH10K_DBGLOG_LEVEL_WARN = 2,
|
|
ATH10K_DBGLOG_LEVEL_ERR = 3,
|
|
};
|
|
|
|
/* VAP ids to enable dbglog */
|
|
#define ATH10K_DBGLOG_CFG_VAP_LOG_LSB 0
|
|
#define ATH10K_DBGLOG_CFG_VAP_LOG_MASK 0x0000ffff
|
|
|
|
/* to enable dbglog in the firmware */
|
|
#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_LSB 16
|
|
#define ATH10K_DBGLOG_CFG_REPORTING_ENABLE_MASK 0x00010000
|
|
|
|
/* timestamp resolution */
|
|
#define ATH10K_DBGLOG_CFG_RESOLUTION_LSB 17
|
|
#define ATH10K_DBGLOG_CFG_RESOLUTION_MASK 0x000E0000
|
|
|
|
/* number of queued messages before sending them to the host */
|
|
#define ATH10K_DBGLOG_CFG_REPORT_SIZE_LSB 20
|
|
#define ATH10K_DBGLOG_CFG_REPORT_SIZE_MASK 0x0ff00000
|
|
|
|
/*
|
|
* Log levels to enable. This defines the minimum level to enable, this is
|
|
* not a bitmask. See enum ath10k_dbglog_level for the values.
|
|
*/
|
|
#define ATH10K_DBGLOG_CFG_LOG_LVL_LSB 28
|
|
#define ATH10K_DBGLOG_CFG_LOG_LVL_MASK 0x70000000
|
|
|
|
/*
|
|
* Note: this is a cleaned up version of a struct firmware uses. For
|
|
* example, config_valid was hidden inside an array.
|
|
*/
|
|
struct wmi_dbglog_cfg_cmd {
|
|
/* bitmask to hold mod id config*/
|
|
__le32 module_enable;
|
|
|
|
/* see ATH10K_DBGLOG_CFG_ */
|
|
__le32 config_enable;
|
|
|
|
/* mask of module id bits to be changed */
|
|
__le32 module_valid;
|
|
|
|
/* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
|
|
__le32 config_valid;
|
|
} __packed;
|
|
|
|
struct wmi_10_4_dbglog_cfg_cmd {
|
|
/* bitmask to hold mod id config*/
|
|
__le64 module_enable;
|
|
|
|
/* see ATH10K_DBGLOG_CFG_ */
|
|
__le32 config_enable;
|
|
|
|
/* mask of module id bits to be changed */
|
|
__le64 module_valid;
|
|
|
|
/* mask of config bits to be changed, see ATH10K_DBGLOG_CFG_ */
|
|
__le32 config_valid;
|
|
} __packed;
|
|
|
|
enum wmi_roam_reason {
|
|
WMI_ROAM_REASON_BETTER_AP = 1,
|
|
WMI_ROAM_REASON_BEACON_MISS = 2,
|
|
WMI_ROAM_REASON_LOW_RSSI = 3,
|
|
WMI_ROAM_REASON_SUITABLE_AP_FOUND = 4,
|
|
WMI_ROAM_REASON_HO_FAILED = 5,
|
|
|
|
/* keep last */
|
|
WMI_ROAM_REASON_MAX,
|
|
};
|
|
|
|
struct wmi_roam_ev {
|
|
__le32 vdev_id;
|
|
__le32 reason;
|
|
} __packed;
|
|
|
|
#define ATH10K_FRAGMT_THRESHOLD_MIN 540
|
|
#define ATH10K_FRAGMT_THRESHOLD_MAX 2346
|
|
|
|
#define WMI_MAX_EVENT 0x1000
|
|
/* Maximum number of pending TXed WMI packets */
|
|
#define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr)
|
|
|
|
/* By default disable power save for IBSS */
|
|
#define ATH10K_DEFAULT_ATIM 0
|
|
|
|
#define WMI_MAX_MEM_REQS 16
|
|
|
|
struct wmi_scan_ev_arg {
|
|
__le32 event_type; /* %WMI_SCAN_EVENT_ */
|
|
__le32 reason; /* %WMI_SCAN_REASON_ */
|
|
__le32 channel_freq; /* only valid for WMI_SCAN_EVENT_FOREIGN_CHANNEL */
|
|
__le32 scan_req_id;
|
|
__le32 scan_id;
|
|
__le32 vdev_id;
|
|
};
|
|
|
|
struct mgmt_tx_compl_params {
|
|
u32 desc_id;
|
|
u32 status;
|
|
u32 ppdu_id;
|
|
int ack_rssi;
|
|
};
|
|
|
|
struct wmi_tlv_mgmt_tx_compl_ev_arg {
|
|
__le32 desc_id;
|
|
__le32 status;
|
|
__le32 pdev_id;
|
|
__le32 ppdu_id;
|
|
__le32 ack_rssi;
|
|
};
|
|
|
|
struct wmi_tlv_mgmt_tx_bundle_compl_ev_arg {
|
|
__le32 num_reports;
|
|
const __le32 *desc_ids;
|
|
const __le32 *status;
|
|
const __le32 *ppdu_ids;
|
|
const __le32 *ack_rssi;
|
|
};
|
|
|
|
struct wmi_peer_delete_resp_ev_arg {
|
|
__le32 vdev_id;
|
|
struct wmi_mac_addr peer_addr;
|
|
};
|
|
|
|
struct wmi_mgmt_rx_ev_arg {
|
|
__le32 channel;
|
|
__le32 snr;
|
|
__le32 rate;
|
|
__le32 phy_mode;
|
|
__le32 buf_len;
|
|
__le32 status; /* %WMI_RX_STATUS_ */
|
|
struct wmi_mgmt_rx_ext_info ext_info;
|
|
};
|
|
|
|
struct wmi_ch_info_ev_arg {
|
|
__le32 err_code;
|
|
__le32 freq;
|
|
__le32 cmd_flags;
|
|
__le32 noise_floor;
|
|
__le32 rx_clear_count;
|
|
__le32 cycle_count;
|
|
__le32 chan_tx_pwr_range;
|
|
__le32 chan_tx_pwr_tp;
|
|
__le32 rx_frame_count;
|
|
__le32 my_bss_rx_cycle_count;
|
|
__le32 rx_11b_mode_data_duration;
|
|
__le32 tx_frame_cnt;
|
|
__le32 mac_clk_mhz;
|
|
};
|
|
|
|
/* From 10.4 firmware, not sure all have the same values. */
|
|
enum wmi_vdev_start_status {
|
|
WMI_VDEV_START_OK = 0,
|
|
WMI_VDEV_START_CHAN_INVALID,
|
|
};
|
|
|
|
struct wmi_vdev_start_ev_arg {
|
|
__le32 vdev_id;
|
|
__le32 req_id;
|
|
__le32 resp_type; /* %WMI_VDEV_RESP_ */
|
|
__le32 status; /* See wmi_vdev_start_status enum above */
|
|
};
|
|
|
|
struct wmi_peer_kick_ev_arg {
|
|
const u8 *mac_addr;
|
|
};
|
|
|
|
struct wmi_swba_ev_arg {
|
|
__le32 vdev_map;
|
|
struct wmi_tim_info_arg tim_info[WMI_MAX_AP_VDEV];
|
|
const struct wmi_p2p_noa_info *noa_info[WMI_MAX_AP_VDEV];
|
|
};
|
|
|
|
struct wmi_phyerr_ev_arg {
|
|
u32 tsf_timestamp;
|
|
u16 freq1;
|
|
u16 freq2;
|
|
u8 rssi_combined;
|
|
u8 chan_width_mhz;
|
|
u8 phy_err_code;
|
|
u16 nf_chains[4];
|
|
u32 buf_len;
|
|
const u8 *buf;
|
|
u8 hdr_len;
|
|
};
|
|
|
|
struct wmi_phyerr_hdr_arg {
|
|
u32 num_phyerrs;
|
|
u32 tsf_l32;
|
|
u32 tsf_u32;
|
|
u32 buf_len;
|
|
const void *phyerrs;
|
|
};
|
|
|
|
struct wmi_dfs_status_ev_arg {
|
|
u32 status;
|
|
};
|
|
|
|
struct wmi_svc_rdy_ev_arg {
|
|
__le32 min_tx_power;
|
|
__le32 max_tx_power;
|
|
__le32 ht_cap;
|
|
__le32 vht_cap;
|
|
__le32 sw_ver0;
|
|
__le32 sw_ver1;
|
|
__le32 fw_build;
|
|
__le32 phy_capab;
|
|
__le32 num_rf_chains;
|
|
__le32 eeprom_rd;
|
|
__le32 num_mem_reqs;
|
|
__le32 low_5ghz_chan;
|
|
__le32 high_5ghz_chan;
|
|
const __le32 *service_map;
|
|
size_t service_map_len;
|
|
const struct wlan_host_mem_req *mem_reqs[WMI_MAX_MEM_REQS];
|
|
};
|
|
|
|
struct wmi_svc_avail_ev_arg {
|
|
__le32 service_map_ext_len;
|
|
const __le32 *service_map_ext;
|
|
};
|
|
|
|
struct wmi_rdy_ev_arg {
|
|
__le32 sw_version;
|
|
__le32 abi_version;
|
|
__le32 status;
|
|
const u8 *mac_addr;
|
|
};
|
|
|
|
struct wmi_roam_ev_arg {
|
|
__le32 vdev_id;
|
|
__le32 reason;
|
|
__le32 rssi;
|
|
};
|
|
|
|
struct wmi_echo_ev_arg {
|
|
__le32 value;
|
|
};
|
|
|
|
struct wmi_pdev_temperature_event {
|
|
/* temperature value in Celcius degree */
|
|
__le32 temperature;
|
|
} __packed;
|
|
|
|
struct wmi_pdev_bss_chan_info_event {
|
|
__le32 freq;
|
|
__le32 noise_floor;
|
|
__le64 cycle_busy;
|
|
__le64 cycle_total;
|
|
__le64 cycle_tx;
|
|
__le64 cycle_rx;
|
|
__le64 cycle_rx_bss;
|
|
__le32 reserved;
|
|
} __packed;
|
|
|
|
/* WOW structures */
|
|
enum wmi_wow_wakeup_event {
|
|
WOW_BMISS_EVENT = 0,
|
|
WOW_BETTER_AP_EVENT,
|
|
WOW_DEAUTH_RECVD_EVENT,
|
|
WOW_MAGIC_PKT_RECVD_EVENT,
|
|
WOW_GTK_ERR_EVENT,
|
|
WOW_FOURWAY_HSHAKE_EVENT,
|
|
WOW_EAPOL_RECVD_EVENT,
|
|
WOW_NLO_DETECTED_EVENT,
|
|
WOW_DISASSOC_RECVD_EVENT,
|
|
WOW_PATTERN_MATCH_EVENT,
|
|
WOW_CSA_IE_EVENT,
|
|
WOW_PROBE_REQ_WPS_IE_EVENT,
|
|
WOW_AUTH_REQ_EVENT,
|
|
WOW_ASSOC_REQ_EVENT,
|
|
WOW_HTT_EVENT,
|
|
WOW_RA_MATCH_EVENT,
|
|
WOW_HOST_AUTO_SHUTDOWN_EVENT,
|
|
WOW_IOAC_MAGIC_EVENT,
|
|
WOW_IOAC_SHORT_EVENT,
|
|
WOW_IOAC_EXTEND_EVENT,
|
|
WOW_IOAC_TIMER_EVENT,
|
|
WOW_DFS_PHYERR_RADAR_EVENT,
|
|
WOW_BEACON_EVENT,
|
|
WOW_CLIENT_KICKOUT_EVENT,
|
|
WOW_EVENT_MAX,
|
|
};
|
|
|
|
#define C2S(x) case x: return #x
|
|
|
|
static inline const char *wow_wakeup_event(enum wmi_wow_wakeup_event ev)
|
|
{
|
|
switch (ev) {
|
|
C2S(WOW_BMISS_EVENT);
|
|
C2S(WOW_BETTER_AP_EVENT);
|
|
C2S(WOW_DEAUTH_RECVD_EVENT);
|
|
C2S(WOW_MAGIC_PKT_RECVD_EVENT);
|
|
C2S(WOW_GTK_ERR_EVENT);
|
|
C2S(WOW_FOURWAY_HSHAKE_EVENT);
|
|
C2S(WOW_EAPOL_RECVD_EVENT);
|
|
C2S(WOW_NLO_DETECTED_EVENT);
|
|
C2S(WOW_DISASSOC_RECVD_EVENT);
|
|
C2S(WOW_PATTERN_MATCH_EVENT);
|
|
C2S(WOW_CSA_IE_EVENT);
|
|
C2S(WOW_PROBE_REQ_WPS_IE_EVENT);
|
|
C2S(WOW_AUTH_REQ_EVENT);
|
|
C2S(WOW_ASSOC_REQ_EVENT);
|
|
C2S(WOW_HTT_EVENT);
|
|
C2S(WOW_RA_MATCH_EVENT);
|
|
C2S(WOW_HOST_AUTO_SHUTDOWN_EVENT);
|
|
C2S(WOW_IOAC_MAGIC_EVENT);
|
|
C2S(WOW_IOAC_SHORT_EVENT);
|
|
C2S(WOW_IOAC_EXTEND_EVENT);
|
|
C2S(WOW_IOAC_TIMER_EVENT);
|
|
C2S(WOW_DFS_PHYERR_RADAR_EVENT);
|
|
C2S(WOW_BEACON_EVENT);
|
|
C2S(WOW_CLIENT_KICKOUT_EVENT);
|
|
C2S(WOW_EVENT_MAX);
|
|
default:
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
enum wmi_wow_wake_reason {
|
|
WOW_REASON_UNSPECIFIED = -1,
|
|
WOW_REASON_NLOD = 0,
|
|
WOW_REASON_AP_ASSOC_LOST,
|
|
WOW_REASON_LOW_RSSI,
|
|
WOW_REASON_DEAUTH_RECVD,
|
|
WOW_REASON_DISASSOC_RECVD,
|
|
WOW_REASON_GTK_HS_ERR,
|
|
WOW_REASON_EAP_REQ,
|
|
WOW_REASON_FOURWAY_HS_RECV,
|
|
WOW_REASON_TIMER_INTR_RECV,
|
|
WOW_REASON_PATTERN_MATCH_FOUND,
|
|
WOW_REASON_RECV_MAGIC_PATTERN,
|
|
WOW_REASON_P2P_DISC,
|
|
WOW_REASON_WLAN_HB,
|
|
WOW_REASON_CSA_EVENT,
|
|
WOW_REASON_PROBE_REQ_WPS_IE_RECV,
|
|
WOW_REASON_AUTH_REQ_RECV,
|
|
WOW_REASON_ASSOC_REQ_RECV,
|
|
WOW_REASON_HTT_EVENT,
|
|
WOW_REASON_RA_MATCH,
|
|
WOW_REASON_HOST_AUTO_SHUTDOWN,
|
|
WOW_REASON_IOAC_MAGIC_EVENT,
|
|
WOW_REASON_IOAC_SHORT_EVENT,
|
|
WOW_REASON_IOAC_EXTEND_EVENT,
|
|
WOW_REASON_IOAC_TIMER_EVENT,
|
|
WOW_REASON_ROAM_HO,
|
|
WOW_REASON_DFS_PHYERR_RADADR_EVENT,
|
|
WOW_REASON_BEACON_RECV,
|
|
WOW_REASON_CLIENT_KICKOUT_EVENT,
|
|
WOW_REASON_DEBUG_TEST = 0xFF,
|
|
};
|
|
|
|
static inline const char *wow_reason(enum wmi_wow_wake_reason reason)
|
|
{
|
|
switch (reason) {
|
|
C2S(WOW_REASON_UNSPECIFIED);
|
|
C2S(WOW_REASON_NLOD);
|
|
C2S(WOW_REASON_AP_ASSOC_LOST);
|
|
C2S(WOW_REASON_LOW_RSSI);
|
|
C2S(WOW_REASON_DEAUTH_RECVD);
|
|
C2S(WOW_REASON_DISASSOC_RECVD);
|
|
C2S(WOW_REASON_GTK_HS_ERR);
|
|
C2S(WOW_REASON_EAP_REQ);
|
|
C2S(WOW_REASON_FOURWAY_HS_RECV);
|
|
C2S(WOW_REASON_TIMER_INTR_RECV);
|
|
C2S(WOW_REASON_PATTERN_MATCH_FOUND);
|
|
C2S(WOW_REASON_RECV_MAGIC_PATTERN);
|
|
C2S(WOW_REASON_P2P_DISC);
|
|
C2S(WOW_REASON_WLAN_HB);
|
|
C2S(WOW_REASON_CSA_EVENT);
|
|
C2S(WOW_REASON_PROBE_REQ_WPS_IE_RECV);
|
|
C2S(WOW_REASON_AUTH_REQ_RECV);
|
|
C2S(WOW_REASON_ASSOC_REQ_RECV);
|
|
C2S(WOW_REASON_HTT_EVENT);
|
|
C2S(WOW_REASON_RA_MATCH);
|
|
C2S(WOW_REASON_HOST_AUTO_SHUTDOWN);
|
|
C2S(WOW_REASON_IOAC_MAGIC_EVENT);
|
|
C2S(WOW_REASON_IOAC_SHORT_EVENT);
|
|
C2S(WOW_REASON_IOAC_EXTEND_EVENT);
|
|
C2S(WOW_REASON_IOAC_TIMER_EVENT);
|
|
C2S(WOW_REASON_ROAM_HO);
|
|
C2S(WOW_REASON_DFS_PHYERR_RADADR_EVENT);
|
|
C2S(WOW_REASON_BEACON_RECV);
|
|
C2S(WOW_REASON_CLIENT_KICKOUT_EVENT);
|
|
C2S(WOW_REASON_DEBUG_TEST);
|
|
default:
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
#undef C2S
|
|
|
|
struct wmi_wow_ev_arg {
|
|
u32 vdev_id;
|
|
u32 flag;
|
|
enum wmi_wow_wake_reason wake_reason;
|
|
u32 data_len;
|
|
};
|
|
|
|
#define WOW_MIN_PATTERN_SIZE 1
|
|
#define WOW_MAX_PATTERN_SIZE 148
|
|
#define WOW_MAX_PKT_OFFSET 128
|
|
#define WOW_HDR_LEN (sizeof(struct ieee80211_hdr_3addr) + \
|
|
sizeof(struct rfc1042_hdr))
|
|
#define WOW_MAX_REDUCE (WOW_HDR_LEN - sizeof(struct ethhdr) - \
|
|
offsetof(struct ieee80211_hdr_3addr, addr1))
|
|
|
|
enum wmi_tdls_state {
|
|
WMI_TDLS_DISABLE,
|
|
WMI_TDLS_ENABLE_PASSIVE,
|
|
WMI_TDLS_ENABLE_ACTIVE,
|
|
WMI_TDLS_ENABLE_ACTIVE_EXTERNAL_CONTROL,
|
|
};
|
|
|
|
enum wmi_tdls_peer_state {
|
|
WMI_TDLS_PEER_STATE_PEERING,
|
|
WMI_TDLS_PEER_STATE_CONNECTED,
|
|
WMI_TDLS_PEER_STATE_TEARDOWN,
|
|
};
|
|
|
|
struct wmi_tdls_peer_update_cmd_arg {
|
|
u32 vdev_id;
|
|
enum wmi_tdls_peer_state peer_state;
|
|
u8 addr[ETH_ALEN];
|
|
};
|
|
|
|
#define WMI_TDLS_MAX_SUPP_OPER_CLASSES 32
|
|
|
|
#define WMI_TDLS_PEER_SP_MASK 0x60
|
|
#define WMI_TDLS_PEER_SP_LSB 5
|
|
|
|
enum wmi_tdls_options {
|
|
WMI_TDLS_OFFCHAN_EN = BIT(0),
|
|
WMI_TDLS_BUFFER_STA_EN = BIT(1),
|
|
WMI_TDLS_SLEEP_STA_EN = BIT(2),
|
|
};
|
|
|
|
enum {
|
|
WMI_TDLS_PEER_QOS_AC_VO = BIT(0),
|
|
WMI_TDLS_PEER_QOS_AC_VI = BIT(1),
|
|
WMI_TDLS_PEER_QOS_AC_BK = BIT(2),
|
|
WMI_TDLS_PEER_QOS_AC_BE = BIT(3),
|
|
};
|
|
|
|
struct wmi_tdls_peer_capab_arg {
|
|
u8 peer_uapsd_queues;
|
|
u8 peer_max_sp;
|
|
u32 buff_sta_support;
|
|
u32 off_chan_support;
|
|
u32 peer_curr_operclass;
|
|
u32 self_curr_operclass;
|
|
u32 peer_chan_len;
|
|
u32 peer_operclass_len;
|
|
u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
|
|
u32 is_peer_responder;
|
|
u32 pref_offchan_num;
|
|
u32 pref_offchan_bw;
|
|
};
|
|
|
|
struct wmi_10_4_tdls_set_state_cmd {
|
|
__le32 vdev_id;
|
|
__le32 state;
|
|
__le32 notification_interval_ms;
|
|
__le32 tx_discovery_threshold;
|
|
__le32 tx_teardown_threshold;
|
|
__le32 rssi_teardown_threshold;
|
|
__le32 rssi_delta;
|
|
__le32 tdls_options;
|
|
__le32 tdls_peer_traffic_ind_window;
|
|
__le32 tdls_peer_traffic_response_timeout_ms;
|
|
__le32 tdls_puapsd_mask;
|
|
__le32 tdls_puapsd_inactivity_time_ms;
|
|
__le32 tdls_puapsd_rx_frame_threshold;
|
|
__le32 teardown_notification_ms;
|
|
__le32 tdls_peer_kickout_threshold;
|
|
} __packed;
|
|
|
|
struct wmi_tdls_peer_capabilities {
|
|
__le32 peer_qos;
|
|
__le32 buff_sta_support;
|
|
__le32 off_chan_support;
|
|
__le32 peer_curr_operclass;
|
|
__le32 self_curr_operclass;
|
|
__le32 peer_chan_len;
|
|
__le32 peer_operclass_len;
|
|
u8 peer_operclass[WMI_TDLS_MAX_SUPP_OPER_CLASSES];
|
|
__le32 is_peer_responder;
|
|
__le32 pref_offchan_num;
|
|
__le32 pref_offchan_bw;
|
|
struct wmi_channel peer_chan_list[1];
|
|
} __packed;
|
|
|
|
struct wmi_10_4_tdls_peer_update_cmd {
|
|
__le32 vdev_id;
|
|
struct wmi_mac_addr peer_macaddr;
|
|
__le32 peer_state;
|
|
__le32 reserved[4];
|
|
struct wmi_tdls_peer_capabilities peer_capab;
|
|
} __packed;
|
|
|
|
enum wmi_tdls_peer_reason {
|
|
WMI_TDLS_TEARDOWN_REASON_TX,
|
|
WMI_TDLS_TEARDOWN_REASON_RSSI,
|
|
WMI_TDLS_TEARDOWN_REASON_SCAN,
|
|
WMI_TDLS_DISCONNECTED_REASON_PEER_DELETE,
|
|
WMI_TDLS_TEARDOWN_REASON_PTR_TIMEOUT,
|
|
WMI_TDLS_TEARDOWN_REASON_BAD_PTR,
|
|
WMI_TDLS_TEARDOWN_REASON_NO_RESPONSE,
|
|
WMI_TDLS_ENTER_BUF_STA,
|
|
WMI_TDLS_EXIT_BUF_STA,
|
|
WMI_TDLS_ENTER_BT_BUSY_MODE,
|
|
WMI_TDLS_EXIT_BT_BUSY_MODE,
|
|
WMI_TDLS_SCAN_STARTED_EVENT,
|
|
WMI_TDLS_SCAN_COMPLETED_EVENT,
|
|
};
|
|
|
|
enum wmi_tdls_peer_notification {
|
|
WMI_TDLS_SHOULD_DISCOVER,
|
|
WMI_TDLS_SHOULD_TEARDOWN,
|
|
WMI_TDLS_PEER_DISCONNECTED,
|
|
WMI_TDLS_CONNECTION_TRACKER_NOTIFICATION,
|
|
};
|
|
|
|
struct wmi_tdls_peer_event {
|
|
struct wmi_mac_addr peer_macaddr;
|
|
/* see enum wmi_tdls_peer_notification*/
|
|
__le32 peer_status;
|
|
/* see enum wmi_tdls_peer_reason */
|
|
__le32 peer_reason;
|
|
__le32 vdev_id;
|
|
} __packed;
|
|
|
|
enum wmi_txbf_conf {
|
|
WMI_TXBF_CONF_UNSUPPORTED,
|
|
WMI_TXBF_CONF_BEFORE_ASSOC,
|
|
WMI_TXBF_CONF_AFTER_ASSOC,
|
|
};
|
|
|
|
#define WMI_CCA_DETECT_LEVEL_AUTO 0
|
|
#define WMI_CCA_DETECT_MARGIN_AUTO 0
|
|
|
|
struct wmi_pdev_set_adaptive_cca_params {
|
|
__le32 enable;
|
|
__le32 cca_detect_level;
|
|
__le32 cca_detect_margin;
|
|
} __packed;
|
|
|
|
#define WMI_PNO_MAX_SCHED_SCAN_PLANS 2
|
|
#define WMI_PNO_MAX_SCHED_SCAN_PLAN_INT 7200
|
|
#define WMI_PNO_MAX_SCHED_SCAN_PLAN_ITRNS 100
|
|
#define WMI_PNO_MAX_NETW_CHANNELS 26
|
|
#define WMI_PNO_MAX_NETW_CHANNELS_EX 60
|
|
#define WMI_PNO_MAX_SUPP_NETWORKS WLAN_SCAN_PARAMS_MAX_SSID
|
|
#define WMI_PNO_MAX_IE_LENGTH WLAN_SCAN_PARAMS_MAX_IE_LEN
|
|
|
|
/*size based of dot11 declaration without extra IEs as we will not carry those for PNO*/
|
|
#define WMI_PNO_MAX_PB_REQ_SIZE 450
|
|
|
|
#define WMI_PNO_24G_DEFAULT_CH 1
|
|
#define WMI_PNO_5G_DEFAULT_CH 36
|
|
|
|
#define WMI_ACTIVE_MAX_CHANNEL_TIME 40
|
|
#define WMI_PASSIVE_MAX_CHANNEL_TIME 110
|
|
|
|
/* SSID broadcast type */
|
|
enum wmi_SSID_bcast_type {
|
|
BCAST_UNKNOWN = 0,
|
|
BCAST_NORMAL = 1,
|
|
BCAST_HIDDEN = 2,
|
|
};
|
|
|
|
struct wmi_network_type {
|
|
struct wmi_ssid ssid;
|
|
u32 authentication;
|
|
u32 encryption;
|
|
u32 bcast_nw_type;
|
|
u8 channel_count;
|
|
u16 channels[WMI_PNO_MAX_NETW_CHANNELS_EX];
|
|
s32 rssi_threshold;
|
|
} __packed;
|
|
|
|
struct wmi_pno_scan_req {
|
|
u8 enable;
|
|
u8 vdev_id;
|
|
u8 uc_networks_count;
|
|
struct wmi_network_type a_networks[WMI_PNO_MAX_SUPP_NETWORKS];
|
|
u32 fast_scan_period;
|
|
u32 slow_scan_period;
|
|
u8 fast_scan_max_cycles;
|
|
|
|
bool do_passive_scan;
|
|
|
|
u32 delay_start_time;
|
|
u32 active_min_time;
|
|
u32 active_max_time;
|
|
u32 passive_min_time;
|
|
u32 passive_max_time;
|
|
|
|
/* mac address randomization attributes */
|
|
u32 enable_pno_scan_randomization;
|
|
u8 mac_addr[ETH_ALEN];
|
|
u8 mac_addr_mask[ETH_ALEN];
|
|
} __packed;
|
|
|
|
enum wmi_host_platform_type {
|
|
WMI_HOST_PLATFORM_HIGH_PERF,
|
|
WMI_HOST_PLATFORM_LOW_PERF,
|
|
};
|
|
|
|
enum wmi_bss_survey_req_type {
|
|
WMI_BSS_SURVEY_REQ_TYPE_READ = 1,
|
|
WMI_BSS_SURVEY_REQ_TYPE_READ_CLEAR,
|
|
};
|
|
|
|
struct wmi_pdev_chan_info_req_cmd {
|
|
__le32 type;
|
|
__le32 reserved;
|
|
} __packed;
|
|
|
|
/* bb timing register configurations */
|
|
struct wmi_bb_timing_cfg_arg {
|
|
/* Tx_end to pa off timing */
|
|
u32 bb_tx_timing;
|
|
|
|
/* Tx_end to external pa off timing */
|
|
u32 bb_xpa_timing;
|
|
};
|
|
|
|
struct wmi_pdev_bb_timing_cfg_cmd {
|
|
/* Tx_end to pa off timing */
|
|
__le32 bb_tx_timing;
|
|
|
|
/* Tx_end to external pa off timing */
|
|
__le32 bb_xpa_timing;
|
|
} __packed;
|
|
|
|
struct ath10k;
|
|
struct ath10k_vif;
|
|
struct ath10k_fw_stats_pdev;
|
|
struct ath10k_fw_stats_peer;
|
|
struct ath10k_fw_stats;
|
|
|
|
int ath10k_wmi_attach(struct ath10k *ar);
|
|
void ath10k_wmi_detach(struct ath10k *ar);
|
|
void ath10k_wmi_free_host_mem(struct ath10k *ar);
|
|
int ath10k_wmi_wait_for_service_ready(struct ath10k *ar);
|
|
int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar);
|
|
|
|
struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
|
|
int ath10k_wmi_connect(struct ath10k *ar);
|
|
|
|
struct sk_buff *ath10k_wmi_alloc_skb(struct ath10k *ar, u32 len);
|
|
int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, u32 cmd_id);
|
|
int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb,
|
|
u32 cmd_id);
|
|
void ath10k_wmi_start_scan_init(struct ath10k *ar, struct wmi_start_scan_arg *arg);
|
|
|
|
void ath10k_wmi_pull_pdev_stats_base(const struct wmi_pdev_stats_base *src,
|
|
struct ath10k_fw_stats_pdev *dst);
|
|
void ath10k_wmi_pull_pdev_stats_tx(const struct wmi_pdev_stats_tx *src,
|
|
struct ath10k_fw_stats_pdev *dst);
|
|
void ath10k_wmi_pull_pdev_stats_rx(const struct wmi_pdev_stats_rx *src,
|
|
struct ath10k_fw_stats_pdev *dst);
|
|
void ath10k_wmi_pull_pdev_stats_extra(const struct wmi_pdev_stats_extra *src,
|
|
struct ath10k_fw_stats_pdev *dst);
|
|
void ath10k_wmi_pull_peer_stats(const struct wmi_peer_stats *src,
|
|
struct ath10k_fw_stats_peer *dst);
|
|
void ath10k_wmi_put_host_mem_chunks(struct ath10k *ar,
|
|
struct wmi_host_mem_chunks *chunks);
|
|
void ath10k_wmi_put_start_scan_common(struct wmi_start_scan_common *cmn,
|
|
const struct wmi_start_scan_arg *arg);
|
|
void ath10k_wmi_set_wmm_param(struct wmi_wmm_params *params,
|
|
const struct wmi_wmm_params_arg *arg);
|
|
void ath10k_wmi_put_wmi_channel(struct wmi_channel *ch,
|
|
const struct wmi_channel_arg *arg);
|
|
int ath10k_wmi_start_scan_verify(const struct wmi_start_scan_arg *arg);
|
|
|
|
int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb);
|
|
int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb);
|
|
int ath10k_wmi_event_mgmt_tx_compl(struct ath10k *ar, struct sk_buff *skb);
|
|
int ath10k_wmi_event_mgmt_tx_bundle_compl(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_echo(struct ath10k *ar, struct sk_buff *skb);
|
|
int ath10k_wmi_event_debug_mesg(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_update_stats(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_vdev_start_resp(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_vdev_stopped(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_peer_sta_kickout(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_tbttoffset_update(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_dfs(struct ath10k *ar,
|
|
struct wmi_phyerr_ev_arg *phyerr, u64 tsf);
|
|
void ath10k_wmi_event_spectral_scan(struct ath10k *ar,
|
|
struct wmi_phyerr_ev_arg *phyerr,
|
|
u64 tsf);
|
|
void ath10k_wmi_event_phyerr(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_roam(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_profile_match(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_debug_print(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_pdev_qvit(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_wlan_profile_data(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_rtt_measurement_report(struct ath10k *ar,
|
|
struct sk_buff *skb);
|
|
void ath10k_wmi_event_tsf_measurement_report(struct ath10k *ar,
|
|
struct sk_buff *skb);
|
|
void ath10k_wmi_event_rtt_error_report(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_wow_wakeup_host(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_dcs_interference(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_pdev_tpc_config(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_pdev_ftm_intg(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_gtk_offload_status(struct ath10k *ar,
|
|
struct sk_buff *skb);
|
|
void ath10k_wmi_event_gtk_rekey_fail(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_delba_complete(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_addba_complete(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_vdev_install_key_complete(struct ath10k *ar,
|
|
struct sk_buff *skb);
|
|
void ath10k_wmi_event_inst_rssi_stats(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_vdev_standby_req(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_vdev_resume_req(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_service_ready(struct ath10k *ar, struct sk_buff *skb);
|
|
int ath10k_wmi_event_ready(struct ath10k *ar, struct sk_buff *skb);
|
|
void ath10k_wmi_event_service_available(struct ath10k *ar, struct sk_buff *skb);
|
|
int ath10k_wmi_op_pull_phyerr_ev(struct ath10k *ar, const void *phyerr_buf,
|
|
int left_len, struct wmi_phyerr_ev_arg *arg);
|
|
void ath10k_wmi_main_op_fw_stats_fill(struct ath10k *ar,
|
|
struct ath10k_fw_stats *fw_stats,
|
|
char *buf);
|
|
void ath10k_wmi_10x_op_fw_stats_fill(struct ath10k *ar,
|
|
struct ath10k_fw_stats *fw_stats,
|
|
char *buf);
|
|
size_t ath10k_wmi_fw_stats_num_peers(struct list_head *head);
|
|
size_t ath10k_wmi_fw_stats_num_vdevs(struct list_head *head);
|
|
void ath10k_wmi_10_4_op_fw_stats_fill(struct ath10k *ar,
|
|
struct ath10k_fw_stats *fw_stats,
|
|
char *buf);
|
|
int ath10k_wmi_op_get_vdev_subtype(struct ath10k *ar,
|
|
enum wmi_vdev_subtype subtype);
|
|
int ath10k_wmi_barrier(struct ath10k *ar);
|
|
void ath10k_wmi_tpc_config_get_rate_code(u8 *rate_code, u16 *pream_table,
|
|
u32 num_tx_chain);
|
|
void ath10k_wmi_event_tpc_final_table(struct ath10k *ar, struct sk_buff *skb);
|
|
|
|
#endif /* _WMI_H_ */
|