AuxXxilium/linux_dsm_epyc7002
1
0
Fork 0
mirror of https://github.com/AuxXxilium/linux_dsm_epyc7002.git synced 2024-12-22 01:16:57 +07:00
Code Issues Actions Packages Projects Releases Wiki Activity
c1cf2b3d63
linux_dsm_epyc7002/arch/arm/boot/dts/rk3066a-rayeager.dts
Heiko Stuebner 07f08d9cee ARM: dts: rockchip: bulk convert gpios to their constant counterparts 
Rockchip SoCs use 2 different numbering schemes. Where the gpio-
controllers just count 0-31 for their 32 gpios, the underlying
iomux controller splits these into 4 separate entities A-D.

Device-schematics always use these iomux-values to identify pins,
so to make mapping schematics to devicetree easier Andy Yan introduced
named constants for the pins but so far we only used them on new
additions.

Using a sed-script created by Emil Renner Berthing bulk-convert
the remaining raw gpio numbers into their descriptive counterparts
and also gets rid of the unhelpful RK_FUNC_x -> x and RK_GPIOx -> x
mappings:

/rockchip,pins *=/bcheck
b # to end of script
:append-next-line
N
:check
/^[^;]*$/bappend-next-line
s/<RK_GPIO\([0-9]\) /<\1 /g
s/<\([^ ][^ ]*  *\)0 /<\1RK_PA0 /g
s/<\([^ ][^ ]*  *\)1 /<\1RK_PA1 /g
s/<\([^ ][^ ]*  *\)2 /<\1RK_PA2 /g
s/<\([^ ][^ ]*  *\)3 /<\1RK_PA3 /g
s/<\([^ ][^ ]*  *\)4 /<\1RK_PA4 /g
s/<\([^ ][^ ]*  *\)5 /<\1RK_PA5 /g
s/<\([^ ][^ ]*  *\)6 /<\1RK_PA6 /g
s/<\([^ ][^ ]*  *\)7 /<\1RK_PA7 /g
s/<\([^ ][^ ]*  *\)8 /<\1RK_PB0 /g
s/<\([^ ][^ ]*  *\)9 /<\1RK_PB1 /g
s/<\([^ ][^ ]*  *\)10 /<\1RK_PB2 /g
s/<\([^ ][^ ]*  *\)11 /<\1RK_PB3 /g
s/<\([^ ][^ ]*  *\)12 /<\1RK_PB4 /g
s/<\([^ ][^ ]*  *\)13 /<\1RK_PB5 /g
s/<\([^ ][^ ]*  *\)14 /<\1RK_PB6 /g
s/<\([^ ][^ ]*  *\)15 /<\1RK_PB7 /g
s/<\([^ ][^ ]*  *\)16 /<\1RK_PC0 /g
s/<\([^ ][^ ]*  *\)17 /<\1RK_PC1 /g
s/<\([^ ][^ ]*  *\)18 /<\1RK_PC2 /g
s/<\([^ ][^ ]*  *\)19 /<\1RK_PC3 /g
s/<\([^ ][^ ]*  *\)20 /<\1RK_PC4 /g
s/<\([^ ][^ ]*  *\)21 /<\1RK_PC5 /g
s/<\([^ ][^ ]*  *\)22 /<\1RK_PC6 /g
s/<\([^ ][^ ]*  *\)23 /<\1RK_PC7 /g
s/<\([^ ][^ ]*  *\)24 /<\1RK_PD0 /g
s/<\([^ ][^ ]*  *\)25 /<\1RK_PD1 /g
s/<\([^ ][^ ]*  *\)26 /<\1RK_PD2 /g
s/<\([^ ][^ ]*  *\)27 /<\1RK_PD3 /g
s/<\([^ ][^ ]*  *\)28 /<\1RK_PD4 /g
s/<\([^ ][^ ]*  *\)29 /<\1RK_PD5 /g
s/<\([^ ][^ ]*  *\)30 /<\1RK_PD6 /g
s/<\([^ ][^ ]*  *\)31 /<\1RK_PD7 /g
s/<\([^ ][^ ]*  *[^ ][^ ]*  *\)0 /<\1RK_FUNC_GPIO /g
s/<\([^ ][^ ]*  *[^ ][^ ]*  *\)RK_FUNC_\([1-9]\) /<\1\2 /g

Suggested-by: Emil Renner Berthing <esmil@mailme.dk>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2019-04-11 14:38:26 +02:00

448 lines
8.8 KiB
Plaintext
Raw Blame History

// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2014, 2015 FUKAUMI Naoki <naobsd@gmail.com>
*/
/dts-v1/;
#include <dt-bindings/input/input.h>
#include "rk3066a.dtsi"
/ {
model = "Rayeager PX2";
compatible = "chipspark,rayeager-px2", "rockchip,rk3066a";
memory@60000000 {
device_type = "memory";
reg = <0x60000000 0x40000000>;
};
ir: ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio6 RK_PA1 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_int>;
};
keys: gpio-keys {
compatible = "gpio-keys";
power {
wakeup-source;
gpios = <&gpio6 RK_PA2 GPIO_ACTIVE_LOW>;
label = "GPIO Power";
linux,code = <KEY_POWER>;
pinctrl-names = "default";
pinctrl-0 = <&pwr_key>;
};
};
vdd_log: vdd-log {
compatible = "pwm-regulator";
pwms = <&pwm3 0 1000>;
regulator-name = "vdd_log";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
voltage-table = <1000000 100>,
<1200000 42>;
status = "okay";
};
vsys: vsys-regulator {
compatible = "regulator-fixed";
regulator-name = "vsys";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
/* input for 5V_STDBY is VSYS or DC5V, selectable by jumper J4 */
vcc_stdby: 5v-stdby-regulator {
compatible = "regulator-fixed";
regulator-name = "5v_stdby";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
regulator-boot-on;
};
vcc_emmc: emmc-regulator {
compatible = "regulator-fixed";
regulator-name = "emmc_vccq";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
vin-supply = <&vsys>;
};
vcc_sata: sata-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&sata_pwr>;
regulator-name = "usb_5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&vcc_stdby>;
};
vcc_sd: sdmmc-regulator {
compatible = "regulator-fixed";
gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&sdmmc_pwr>;
regulator-name = "vcc_sd";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <100000>;
vin-supply = <&vcc_io>;
};
vcc_host: usb-host-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&host_drv>;
regulator-name = "host-pwr";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&vcc_stdby>;
};
vcc_otg: usb-otg-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&otg_drv>;
regulator-name = "vcc_otg";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&vcc_stdby>;
};
};
&cpu0 {
cpu0-supply = <&vdd_arm>;
};
&emac {
pinctrl-names = "default";
pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&rmii_rst>;
phy = <&phy0>;
phy-supply = <&vcc_rmii>;
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
reset-gpios = <&gpio1 RK_PD6 GPIO_ACTIVE_LOW>;
};
};
&emmc {
bus-width = <8>;
cap-mmc-highspeed;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&emmc_clk>, <&emmc_cmd>, <&emmc_rst>;
vmmc-supply = <&vcc_emmc>;
vqmmc-supply = <&vcc_emmc>;
status = "okay";
};
&i2c0 {
clock-frequency = <400000>;
status = "okay";
ak8963: ak8963@d {
compatible = "asahi-kasei,ak8975";
reg = <0x0d>;
interrupt-parent = <&gpio4>;
interrupts = <RK_PC1 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&comp_int>;
};
mma8452: mma8452@1d {
compatible = "fsl,mma8452";
reg = <0x1d>;
interrupt-parent = <&gpio4>;
interrupts = <RK_PC0 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&gsensor_int>;
};
};
&i2c1 {
clock-frequency = <400000>;
status = "okay";
tps: tps@2d {
reg = <0x2d>;
interrupt-parent = <&gpio6>;
interrupts = <RK_PA4 IRQ_TYPE_EDGE_RISING>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_int>, <&pwr_hold>;
vcc1-supply = <&vsys>;
vcc2-supply = <&vsys>;
vcc3-supply = <&vsys>;
vcc4-supply = <&vsys>;
vcc5-supply = <&vcc_io>;
vcc6-supply = <&vcc_io>;
vcc7-supply = <&vsys>;
vccio-supply = <&vsys>;
regulators {
vcc_rtc: regulator@0 {
regulator-name = "vcc_rtc";
regulator-always-on;
};
vcc_io: regulator@1 {
regulator-name = "vcc_io";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
vdd_arm: regulator@2 {
regulator-name = "vdd_arm";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
vcc_ddr: regulator@3 {
regulator-name = "vcc_ddr";
regulator-min-microvolt = <600000>;
regulator-max-microvolt = <1500000>;
regulator-always-on;
regulator-boot-on;
};
vcc18: regulator@5 {
regulator-name = "vcc18";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vdd_11: regulator@6 {
regulator-name = "vdd_11";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
vcc_25: regulator@7 {
regulator-name = "vcc_25";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
vccio_wl: regulator@8 {
regulator-name = "vccio_wl";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vcc25_hdmi: regulator@9 {
regulator-name = "vcc25_hdmi";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
};
vcca_33: regulator@10 {
regulator-name = "vcca_33";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vcc_rmii: regulator@11 {
regulator-name = "vcc_rmii";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vcc28_cif: regulator@12 {
regulator-name = "vcc28_cif";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
};
};
};
#include "tps65910.dtsi"
&i2c2 {
status = "okay";
};
&i2c3 {
status = "okay";
};
&i2c4 {
status = "okay";
};
&mmc0 {
bus-width = <4>;
disable-wp;
pinctrl-names = "default";
pinctrl-0 = <&sd0_clk>, <&sd0_cmd>, <&sd0_cd>, <&sd0_bus4>;
vmmc-supply = <&vcc_sd>;
cap-mmc-highspeed;
cap-sd-highspeed;
status = "okay";
};
&mmc1 {
bus-width = <4>;
non-removable;
pinctrl-names = "default";
pinctrl-0 = <&sd1_clk>, <&sd1_cmd>, <&sd1_bus4>;
vmmc-supply = <&vccio_wl>;
status = "okay";
};
&pinctrl {
pcfg_output_high: pcfg-output-high {
output-high;
};
ak8963 {
comp_int: comp-int {
rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_default>;
};
};
emac {
rmii_rst: rmii-rst {
rockchip,pins = <1 RK_PD6 RK_FUNC_GPIO &pcfg_output_high>;
};
};
ir {
ir_int: ir-int {
rockchip,pins = <6 RK_PA1 RK_FUNC_GPIO &pcfg_pull_default>;
};
};
keys {
pwr_key: pwr-key {
rockchip,pins = <6 RK_PA2 RK_FUNC_GPIO &pcfg_pull_default>;
};
};
mma8452 {
gsensor_int: gsensor-int {
rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_default>;
};
};
mmc {
sdmmc_pwr: sdmmc-pwr {
rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_default>;
};
};
usb_host {
host_drv: host-drv {
rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_default>;
};
hub_rst: hub-rst {
rockchip,pins = <1 RK_PD7 RK_FUNC_GPIO &pcfg_output_high>;
};
sata_pwr: sata-pwr {
rockchip,pins = <4 RK_PC6 RK_FUNC_GPIO &pcfg_pull_default>;
};
sata_reset: sata-reset {
rockchip,pins = <0 RK_PB5 RK_FUNC_GPIO &pcfg_output_high>;
};
};
usb_otg {
otg_drv: otg-drv {
rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_default>;
};
};
tps {
pmic_int: pmic-int {
rockchip,pins = <6 RK_PA4 RK_FUNC_GPIO &pcfg_pull_default>;
};
pwr_hold: pwr-hold {
rockchip,pins = <6 RK_PB0 RK_FUNC_GPIO &pcfg_output_high>;
};
};
};
&pwm1 {
status = "okay";
};
&pwm2 {
status = "okay";
};
&pwm3 {
status = "okay";
};
&saradc {
vref-supply = <&vcc_25>;
status = "okay";
};
&spi0 {
status = "okay";
};
&uart0 {
pinctrl-names = "default";
pinctrl-0 = <&uart0_xfer>, <&uart0_cts>, <&uart0_rts>;
status = "okay";
};
&uart2 {
status = "okay";
};
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_xfer>, <&uart3_cts>, <&uart3_rts>;
status = "okay";
};
&usb_host {
pinctrl-names = "default";
pinctrl-0 = <&hub_rst>, <&sata_reset>;
status = "okay";
};
&usbphy {
status = "okay";
};
&usb_otg {
status = "okay";
};
&wdt {
status = "okay";
};
Reference in New Issue View Git Blame Copy Permalink