linux_dsm_epyc7002/arch/mips/ath79
Gabor Juhos 5fb234560e MIPS: ath79: Use correct IRQ number for the OHCI controller on AR7240
The currently assigned IRQ number to the OHCI controller is incorrect for
the AR7240 SoC, and that leads to the following error message from the
OHCI driver:

ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ath79-ohci ath79-ohci: Atheros built-in OHCI controller
ath79-ohci ath79-ohci: new USB bus registered, assigned bus number 1
ath79-ohci ath79-ohci: irq 14, io mem 0x1b000000
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
usb 1-1: new full-speed USB device number 2 using ath79-ohci
ath79-ohci ath79-ohci: Unlink after no-IRQ?  Controller is probably using the wrong IRQ.

Fix this by using the correct IRQ number.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/4168/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2012-08-17 10:57:27 +02:00
..
clock.c MIPS: ath79: add clock initialization code for AR934X 2012-05-15 17:49:08 +02:00
common.c MIPS: ath79: add AR934X specific glue to ath79_device_reset_{clear,set} 2012-05-15 17:49:09 +02:00
common.h MIPS: ath79: add GPIOLIB support 2011-01-18 19:30:25 +01:00
dev-common.c MIPS: ath79: register UART device for AR934X SoCs 2012-05-15 17:49:10 +02:00
dev-common.h MIPS: ath79: add common watchdog device 2011-01-18 19:30:26 +01:00
dev-gpio-buttons.c MIPS: ath79: Use kmemdup rather than duplicating its implementation 2012-05-15 17:49:00 +02:00
dev-gpio-buttons.h MIPS: ath79: add common GPIO buttons device 2011-01-18 19:30:27 +01:00
dev-leds-gpio.c MIPS: ath79: Use kmemdup rather than duplicating its implementation 2012-05-15 17:49:00 +02:00
dev-leds-gpio.h MIPS: ath79: add common GPIO LEDs device 2011-01-18 19:30:26 +01:00
dev-spi.c MIPS: ath79: add common SPI controller device 2011-01-18 19:30:27 +01:00
dev-spi.h MIPS: ath79: add common SPI controller device 2011-01-18 19:30:27 +01:00
dev-usb.c MIPS: ath79: Use correct IRQ number for the OHCI controller on AR7240 2012-08-17 10:57:27 +02:00
dev-usb.h MIPS: ath79: add common USB Host Controller device 2011-12-07 22:02:44 +00:00
dev-wmac.c MIPS: ath79: add WMAC registration code for AR934X 2012-05-15 17:49:10 +02:00
dev-wmac.h MIPS: ath79: Rename dev-ar913x-wmac.h to dev-wmac.h 2011-12-07 22:02:48 +00:00
early_printk.c MIPS: ath79: add early_printk support for AR934X 2012-05-15 17:49:07 +02:00
gpio.c MIPS: ath79: Fix number of GPIO lines for AR724[12] 2012-08-17 10:57:26 +02:00
irq.c MIPS: ath79: add IRQ handling code for AR934X 2012-05-15 17:49:09 +02:00
Kconfig MIPS: ath79: add initial support for the Atheros DB120 board 2012-05-15 17:49:11 +02:00
mach-ap81.c MIPS: ath79: Rename dev-ar913x-wmac.h to dev-wmac.h 2011-12-07 22:02:48 +00:00
mach-ap121.c MIPS: ath79: Rename dev-ar913x-wmac.h to dev-wmac.h 2011-12-07 22:02:48 +00:00
mach-db120.c MIPS: ath79: add initial support for the Atheros DB120 board 2012-05-15 17:49:11 +02:00
mach-pb44.c MIPS: ath79: register PCI controller on the PB44 board 2012-05-15 17:49:06 +02:00
mach-ubnt-xm.c MIPS: ath79: remove ar724x_pci_add_data function 2012-05-15 17:49:06 +02:00
machtypes.h MIPS: ath79: add initial support for the Atheros DB120 board 2012-05-15 17:49:11 +02:00
Makefile MIPS: ath79: add initial support for the Atheros DB120 board 2012-05-15 17:49:11 +02:00
pci.c MIPS: ath79: add PCI registration code for AR934X 2012-05-15 17:49:11 +02:00
pci.h MIPS: ath79: update copyright headers of PCI related files 2012-05-15 17:49:07 +02:00
Platform MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs 2011-01-18 19:30:24 +01:00
prom.c MIPS: Add initial support for the Atheros AR71XX/AR724X/AR931X SoCs 2011-01-18 19:30:24 +01:00
setup.c MIPS: ath79: add SoC detection code for AR934X 2012-05-15 17:49:07 +02:00