mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-27 08:25:12 +07:00
d83a7cb375
Change livepatch to use a basic per-task consistency model. This is the
foundation which will eventually enable us to patch those ~10% of
security patches which change function or data semantics. This is the
biggest remaining piece needed to make livepatch more generally useful.
This code stems from the design proposal made by Vojtech [1] in November
2014. It's a hybrid of kGraft and kpatch: it uses kGraft's per-task
consistency and syscall barrier switching combined with kpatch's stack
trace switching. There are also a number of fallback options which make
it quite flexible.
Patches are applied on a per-task basis, when the task is deemed safe to
switch over. When a patch is enabled, livepatch enters into a
transition state where tasks are converging to the patched state.
Usually this transition state can complete in a few seconds. The same
sequence occurs when a patch is disabled, except the tasks converge from
the patched state to the unpatched state.
An interrupt handler inherits the patched state of the task it
interrupts. The same is true for forked tasks: the child inherits the
patched state of the parent.
Livepatch uses several complementary approaches to determine when it's
safe to patch tasks:
1. The first and most effective approach is stack checking of sleeping
tasks. If no affected functions are on the stack of a given task,
the task is patched. In most cases this will patch most or all of
the tasks on the first try. Otherwise it'll keep trying
periodically. This option is only available if the architecture has
reliable stacks (HAVE_RELIABLE_STACKTRACE).
2. The second approach, if needed, is kernel exit switching. A
task is switched when it returns to user space from a system call, a
user space IRQ, or a signal. It's useful in the following cases:
a) Patching I/O-bound user tasks which are sleeping on an affected
function. In this case you have to send SIGSTOP and SIGCONT to
force it to exit the kernel and be patched.
b) Patching CPU-bound user tasks. If the task is highly CPU-bound
then it will get patched the next time it gets interrupted by an
IRQ.
c) In the future it could be useful for applying patches for
architectures which don't yet have HAVE_RELIABLE_STACKTRACE. In
this case you would have to signal most of the tasks on the
system. However this isn't supported yet because there's
currently no way to patch kthreads without
HAVE_RELIABLE_STACKTRACE.
3. For idle "swapper" tasks, since they don't ever exit the kernel, they
instead have a klp_update_patch_state() call in the idle loop which
allows them to be patched before the CPU enters the idle state.
(Note there's not yet such an approach for kthreads.)
All the above approaches may be skipped by setting the 'immediate' flag
in the 'klp_patch' struct, which will disable per-task consistency and
patch all tasks immediately. This can be useful if the patch doesn't
change any function or data semantics. Note that, even with this flag
set, it's possible that some tasks may still be running with an old
version of the function, until that function returns.
There's also an 'immediate' flag in the 'klp_func' struct which allows
you to specify that certain functions in the patch can be applied
without per-task consistency. This might be useful if you want to patch
a common function like schedule(), and the function change doesn't need
consistency but the rest of the patch does.
For architectures which don't have HAVE_RELIABLE_STACKTRACE, the user
must set patch->immediate which causes all tasks to be patched
immediately. This option should be used with care, only when the patch
doesn't change any function or data semantics.
In the future, architectures which don't have HAVE_RELIABLE_STACKTRACE
may be allowed to use per-task consistency if we can come up with
another way to patch kthreads.
The /sys/kernel/livepatch/<patch>/transition file shows whether a patch
is in transition. Only a single patch (the topmost patch on the stack)
can be in transition at a given time. A patch can remain in transition
indefinitely, if any of the tasks are stuck in the initial patch state.
A transition can be reversed and effectively canceled by writing the
opposite value to the /sys/kernel/livepatch/<patch>/enabled file while
the transition is in progress. Then all the tasks will attempt to
converge back to the original patch state.
[1] https://lkml.kernel.org/r/20141107140458.GA21774@suse.cz
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Acked-by: Miroslav Benes <mbenes@suse.cz>
Acked-by: Ingo Molnar <mingo@kernel.org> # for the scheduler changes
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
57 lines
1.7 KiB
Plaintext
57 lines
1.7 KiB
Plaintext
What: /sys/kernel/livepatch
|
|
Date: Nov 2014
|
|
KernelVersion: 3.19.0
|
|
Contact: live-patching@vger.kernel.org
|
|
Description:
|
|
Interface for kernel live patching
|
|
|
|
The /sys/kernel/livepatch directory contains subdirectories for
|
|
each loaded live patch module.
|
|
|
|
What: /sys/kernel/livepatch/<patch>
|
|
Date: Nov 2014
|
|
KernelVersion: 3.19.0
|
|
Contact: live-patching@vger.kernel.org
|
|
Description:
|
|
The patch directory contains subdirectories for each kernel
|
|
object (vmlinux or a module) in which it patched functions.
|
|
|
|
What: /sys/kernel/livepatch/<patch>/enabled
|
|
Date: Nov 2014
|
|
KernelVersion: 3.19.0
|
|
Contact: live-patching@vger.kernel.org
|
|
Description:
|
|
A writable attribute that indicates whether the patched
|
|
code is currently applied. Writing 0 will disable the patch
|
|
while writing 1 will re-enable the patch.
|
|
|
|
What: /sys/kernel/livepatch/<patch>/transition
|
|
Date: Feb 2017
|
|
KernelVersion: 4.12.0
|
|
Contact: live-patching@vger.kernel.org
|
|
Description:
|
|
An attribute which indicates whether the patch is currently in
|
|
transition.
|
|
|
|
What: /sys/kernel/livepatch/<patch>/<object>
|
|
Date: Nov 2014
|
|
KernelVersion: 3.19.0
|
|
Contact: live-patching@vger.kernel.org
|
|
Description:
|
|
The object directory contains subdirectories for each function
|
|
that is patched within the object.
|
|
|
|
What: /sys/kernel/livepatch/<patch>/<object>/<function,sympos>
|
|
Date: Nov 2014
|
|
KernelVersion: 3.19.0
|
|
Contact: live-patching@vger.kernel.org
|
|
Description:
|
|
The function directory contains attributes regarding the
|
|
properties and state of the patched function.
|
|
|
|
The directory name contains the patched function name and a
|
|
sympos number corresponding to the nth occurrence of the symbol
|
|
name in kallsyms for the patched object.
|
|
|
|
There are currently no such attributes.
|