mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-24 13:20:23 +07:00
537433b624
We get a moderate number of new machines this time, and only one
new SoC variant (Actions S700):
Actions:
S700 Soc and CubieBoard7 development board
Allo.com Sparky Single-board-computer
Allwinner:
Orange Pi R1 development board
Libre Computer Board ALL-H3-CC H3 single-board computer
ASpeed ast2x00:
Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500
Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500
Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400
AT91:
Axentia Nattis/Natte digital signage
sama5d2 PTC-ek Evaluation board
Freescale/NXP i.MX:
SolidRun Humminboard2 development board
Variscite DART-MX6 SoM and Carrier-board
Technologic TS-4600 and TS-7970 development board
Toradex Colibri iMX7D SoM board
v1.5 variant of Solidrun Cubox-i and Hummingboard
Freescale/NXP Layerscape:
Moxa UC-8410A Series industrial computer
Gemini:
D-Link DNS-313 NAS enclosure
OMAP:
LogicPD OMAP35xx SOM-LV devkit
LogicPD OMAP35xx Torpedo devkit
Renesas:
r8a77970 (V3M) Starter Kit board
r8a7795 (M3-W) Salvator-XS board
We finally managed to get the dtc warnings under control, with no more
build-time warnings for bad device tree files. This includes fixes for
the majority of platforms, including nomadik, samsung, lpc32xx, STi,
spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood,
renesas, hisilicon, and broadcom.
Files get rearranged on a few platforms, in particular the Marvell
Armada 7K/8K device tree files are changed in preparation for future
SoC support, based on more than two of the same chips in one package,
and some boards get renamed for oxnas for consistency.
Finally, many existing SoCs gain descriptions for additional on-chip
devices that we can now support with kernel drivers:
Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG)
Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi)
Aspeed clk controller support
Freescale LS1088A, LS1021A device support
Gemini Ethernet, PCI, TVE, panel
Keystone gpio, qspi, more uarts
Mediatek cpufreq, regulator, clock, reset
Marvell thermal, cpufreq, nand
Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu
Rockchip Mipi, GPU, display
Samsung Exynos5433 PMU, power domain, nfc
Spreadtrum: sc9860 clocks
Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ...
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=qN1F
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree updates from Arnd Bergmann:
"We get a moderate number of new machines this time, and only one new
SoC variant (Actions S700):
Actions:
- S700 Soc and CubieBoard7 development board
- Allo.com Sparky Single-board-computer
Allwinner:
- Orange Pi R1 development board
- Libre Computer Board ALL-H3-CC H3 single-board computer
ASpeed ast2x00:
- Witherspoon: OpenPower Power9 server manufactured by IBM that uses the ASPEED ast2500
- Zaius: OpenPower Power9 server manufactured by Invatech that uses the ASPEED ast2500
- Q71L: Intel Xeon server manufactured by Qanta that uses the ASPEED ast2400
AT91:
- Axentia Nattis/Natte digital signage
- sama5d2 PTC-ek Evaluation board
Freescale/NXP i.MX:
- SolidRun Humminboard2 development board
- Variscite DART-MX6 SoM and Carrier-board
- Technologic TS-4600 and TS-7970 development board
- Toradex Colibri iMX7D SoM board
- v1.5 variant of Solidrun Cubox-i and Hummingboard
Freescale/NXP Layerscape:
- Moxa UC-8410A Series industrial computer
Gemini:
- D-Link DNS-313 NAS enclosure
OMAP:
- LogicPD OMAP35xx SOM-LV devkit
- LogicPD OMAP35xx Torpedo devkit
Renesas:
- r8a77970 (V3M) Starter Kit board
- r8a7795 (M3-W) Salvator-XS board
We finally managed to get the dtc warnings under control, with no more
build-time warnings for bad device tree files. This includes fixes for
the majority of platforms, including nomadik, samsung, lpc32xx, STi,
spear, mediatek, freescale, qcom, realview, keystone, omap, kirkwood,
renesas, hisilicon, and broadcom.
Files get rearranged on a few platforms, in particular the Marvell
Armada 7K/8K device tree files are changed in preparation for future
SoC support, based on more than two of the same chips in one package,
and some boards get renamed for oxnas for consistency.
Finally, many existing SoCs gain descriptions for additional on-chip
devices that we can now support with kernel drivers:
- Allwinner A83t (drm, ethernet, i2c, ...), H3/H5 (USB-OTG)
- Amlogic AXG family (clk, pinctrl, pwm, ...), and others (vpu, hdmi)
- Aspeed clk controller support
- Freescale LS1088A, LS1021A device support
- Gemini Ethernet, PCI, TVE, panel
- Keystone gpio, qspi, more uarts
- Mediatek cpufreq, regulator, clock, reset
- Marvell thermal, cpufreq, nand
- Renesas SMP, thermal, timer, PWM, sound, phy, ipmmu
- Rockchip Mipi, GPU, display
- Samsung Exynos5433 PMU, power domain, nfc
- Spreadtrum: sc9860 clocks
- Tegra TX2 PSDI, HDMI, I2C,SMMU, display, fuse, ..."
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (690 commits)
arm64: dts: stratix10: fix SPI settings
ARM: dts: socfpga: add i2c reset signals
arm64: dts: stratix10: add USB ECC reset bit
arm64: dts: stratix10: enable USB on the devkit
ARM: dts: socfpga: disable over-current for Arria10 USB devkit
ARM: dts: Nokia N9: add support for up/down keys in the dts
ARM: dts: nomadik: add interrupt-parent for clcd
ARM: dts: Add ethernet to a bunch of platforms
ARM: dts: Add ethernet to the Gemini SoC
ARM: dts: rename oxnas dts files
ARM: dts: s5pv210: add interrupt-parent for ohci
ARM: lpc3250: fix uda1380 gpio numbers
ARM: dts: STi: Add gpio polarity for "hdmi,hpd-gpio" property
ARM: dts: dra7: Reduce shut down temperature of non-cpu thermal zones
ARM: dts: n900: Add aliases for lcd and tvout displays
ARM: dts: Update ti-sysc data for existing users
ARM: dts: Fix smartreflex compatible for omap3 shared mpu-iva instance
arm64: dts: marvell: armada-80x0: Fix pinctrl compatible string
arm: spear13xx: Fix spics gpio controller's warning
arm: spear13xx: Fix dmas cells
...
833 lines
20 KiB
Plaintext
833 lines
20 KiB
Plaintext
/*
|
|
* Copyright 2011 Freescale Semiconductor, Inc.
|
|
* Copyright 2011 Linaro Ltd.
|
|
*
|
|
* The code contained herein is licensed under the GNU General Public
|
|
* License. You may obtain a copy of the GNU General Public License
|
|
* Version 2 or later at the following locations:
|
|
*
|
|
* http://www.opensource.org/licenses/gpl-license.html
|
|
* http://www.gnu.org/copyleft/gpl.html
|
|
*/
|
|
|
|
#include "imx53-pinfunc.h"
|
|
#include <dt-bindings/clock/imx5-clock.h>
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/interrupt-controller/irq.h>
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
/*
|
|
* The decompressor and also some bootloaders rely on a
|
|
* pre-existing /chosen node to be available to insert the
|
|
* command line and merge other ATAGS info.
|
|
* Also for U-Boot there must be a pre-existing /memory node.
|
|
*/
|
|
chosen {};
|
|
memory { device_type = "memory"; reg = <0 0>; };
|
|
|
|
aliases {
|
|
ethernet0 = &fec;
|
|
gpio0 = &gpio1;
|
|
gpio1 = &gpio2;
|
|
gpio2 = &gpio3;
|
|
gpio3 = &gpio4;
|
|
gpio4 = &gpio5;
|
|
gpio5 = &gpio6;
|
|
gpio6 = &gpio7;
|
|
i2c0 = &i2c1;
|
|
i2c1 = &i2c2;
|
|
i2c2 = &i2c3;
|
|
mmc0 = &esdhc1;
|
|
mmc1 = &esdhc2;
|
|
mmc2 = &esdhc3;
|
|
mmc3 = &esdhc4;
|
|
serial0 = &uart1;
|
|
serial1 = &uart2;
|
|
serial2 = &uart3;
|
|
serial3 = &uart4;
|
|
serial4 = &uart5;
|
|
spi0 = &ecspi1;
|
|
spi1 = &ecspi2;
|
|
spi2 = &cspi;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cpu0: cpu@0 {
|
|
device_type = "cpu";
|
|
compatible = "arm,cortex-a8";
|
|
reg = <0x0>;
|
|
clocks = <&clks IMX5_CLK_ARM>;
|
|
clock-latency = <61036>;
|
|
voltage-tolerance = <5>;
|
|
operating-points = <
|
|
/* kHz */
|
|
166666 850000
|
|
400000 900000
|
|
800000 1050000
|
|
1000000 1200000
|
|
1200000 1300000
|
|
>;
|
|
};
|
|
};
|
|
|
|
display-subsystem {
|
|
compatible = "fsl,imx-display-subsystem";
|
|
ports = <&ipu_di0>, <&ipu_di1>;
|
|
};
|
|
|
|
tzic: tz-interrupt-controller@fffc000 {
|
|
compatible = "fsl,imx53-tzic", "fsl,tzic";
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x0fffc000 0x4000>;
|
|
};
|
|
|
|
clocks {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
ckil {
|
|
compatible = "fsl,imx-ckil", "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <32768>;
|
|
};
|
|
|
|
ckih1 {
|
|
compatible = "fsl,imx-ckih1", "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <22579200>;
|
|
};
|
|
|
|
ckih2 {
|
|
compatible = "fsl,imx-ckih2", "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <0>;
|
|
};
|
|
|
|
osc {
|
|
compatible = "fsl,imx-osc", "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <24000000>;
|
|
};
|
|
};
|
|
|
|
pmu {
|
|
compatible = "arm,cortex-a8-pmu";
|
|
interrupt-parent = <&tzic>;
|
|
interrupts = <77>;
|
|
};
|
|
|
|
usbphy0: usbphy-0 {
|
|
compatible = "usb-nop-xceiv";
|
|
clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
|
|
clock-names = "main_clk";
|
|
#phy-cells = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
usbphy1: usbphy-1 {
|
|
compatible = "usb-nop-xceiv";
|
|
clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
|
|
clock-names = "main_clk";
|
|
#phy-cells = <0>;
|
|
status = "okay";
|
|
};
|
|
|
|
soc {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "simple-bus";
|
|
interrupt-parent = <&tzic>;
|
|
ranges;
|
|
|
|
sata: sata@10000000 {
|
|
compatible = "fsl,imx53-ahci";
|
|
reg = <0x10000000 0x1000>;
|
|
interrupts = <28>;
|
|
clocks = <&clks IMX5_CLK_SATA_GATE>,
|
|
<&clks IMX5_CLK_SATA_REF>,
|
|
<&clks IMX5_CLK_AHB>;
|
|
clock-names = "sata", "sata_ref", "ahb";
|
|
status = "disabled";
|
|
};
|
|
|
|
ipu: ipu@18000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx53-ipu";
|
|
reg = <0x18000000 0x08000000>;
|
|
interrupts = <11 10>;
|
|
clocks = <&clks IMX5_CLK_IPU_GATE>,
|
|
<&clks IMX5_CLK_IPU_DI0_GATE>,
|
|
<&clks IMX5_CLK_IPU_DI1_GATE>;
|
|
clock-names = "bus", "di0", "di1";
|
|
resets = <&src 2>;
|
|
|
|
ipu_csi0: port@0 {
|
|
reg = <0>;
|
|
};
|
|
|
|
ipu_csi1: port@1 {
|
|
reg = <1>;
|
|
};
|
|
|
|
ipu_di0: port@2 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <2>;
|
|
|
|
ipu_di0_disp0: endpoint@0 {
|
|
reg = <0>;
|
|
};
|
|
|
|
ipu_di0_lvds0: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&lvds0_in>;
|
|
};
|
|
};
|
|
|
|
ipu_di1: port@3 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <3>;
|
|
|
|
ipu_di1_disp1: endpoint@0 {
|
|
reg = <0>;
|
|
};
|
|
|
|
ipu_di1_lvds1: endpoint@1 {
|
|
reg = <1>;
|
|
remote-endpoint = <&lvds1_in>;
|
|
};
|
|
|
|
ipu_di1_tve: endpoint@2 {
|
|
reg = <2>;
|
|
remote-endpoint = <&tve_in>;
|
|
};
|
|
};
|
|
};
|
|
|
|
aips@50000000 { /* AIPS1 */
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x50000000 0x10000000>;
|
|
ranges;
|
|
|
|
spba@50000000 {
|
|
compatible = "fsl,spba-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x50000000 0x40000>;
|
|
ranges;
|
|
|
|
esdhc1: esdhc@50004000 {
|
|
compatible = "fsl,imx53-esdhc";
|
|
reg = <0x50004000 0x4000>;
|
|
interrupts = <1>;
|
|
clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
|
|
<&clks IMX5_CLK_DUMMY>,
|
|
<&clks IMX5_CLK_ESDHC1_PER_GATE>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
esdhc2: esdhc@50008000 {
|
|
compatible = "fsl,imx53-esdhc";
|
|
reg = <0x50008000 0x4000>;
|
|
interrupts = <2>;
|
|
clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
|
|
<&clks IMX5_CLK_DUMMY>,
|
|
<&clks IMX5_CLK_ESDHC2_PER_GATE>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart3: serial@5000c000 {
|
|
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
|
|
reg = <0x5000c000 0x4000>;
|
|
interrupts = <33>;
|
|
clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
|
|
<&clks IMX5_CLK_UART3_PER_GATE>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma 42 4 0>, <&sdma 43 4 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
ecspi1: ecspi@50010000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
|
|
reg = <0x50010000 0x4000>;
|
|
interrupts = <36>;
|
|
clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
|
|
<&clks IMX5_CLK_ECSPI1_PER_GATE>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
ssi2: ssi@50014000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,imx53-ssi",
|
|
"fsl,imx51-ssi",
|
|
"fsl,imx21-ssi";
|
|
reg = <0x50014000 0x4000>;
|
|
interrupts = <30>;
|
|
clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
|
|
<&clks IMX5_CLK_SSI2_ROOT_GATE>;
|
|
clock-names = "ipg", "baud";
|
|
dmas = <&sdma 24 1 0>,
|
|
<&sdma 25 1 0>;
|
|
dma-names = "rx", "tx";
|
|
fsl,fifo-depth = <15>;
|
|
status = "disabled";
|
|
};
|
|
|
|
esdhc3: esdhc@50020000 {
|
|
compatible = "fsl,imx53-esdhc";
|
|
reg = <0x50020000 0x4000>;
|
|
interrupts = <3>;
|
|
clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
|
|
<&clks IMX5_CLK_DUMMY>,
|
|
<&clks IMX5_CLK_ESDHC3_PER_GATE>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
|
|
esdhc4: esdhc@50024000 {
|
|
compatible = "fsl,imx53-esdhc";
|
|
reg = <0x50024000 0x4000>;
|
|
interrupts = <4>;
|
|
clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
|
|
<&clks IMX5_CLK_DUMMY>,
|
|
<&clks IMX5_CLK_ESDHC4_PER_GATE>;
|
|
clock-names = "ipg", "ahb", "per";
|
|
bus-width = <4>;
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
aipstz1: bridge@53f00000 {
|
|
compatible = "fsl,imx53-aipstz";
|
|
reg = <0x53f00000 0x60>;
|
|
};
|
|
|
|
usbotg: usb@53f80000 {
|
|
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
|
|
reg = <0x53f80000 0x0200>;
|
|
interrupts = <18>;
|
|
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
|
|
fsl,usbmisc = <&usbmisc 0>;
|
|
fsl,usbphy = <&usbphy0>;
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh1: usb@53f80200 {
|
|
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
|
|
reg = <0x53f80200 0x0200>;
|
|
interrupts = <14>;
|
|
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
|
|
fsl,usbmisc = <&usbmisc 1>;
|
|
fsl,usbphy = <&usbphy1>;
|
|
dr_mode = "host";
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh2: usb@53f80400 {
|
|
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
|
|
reg = <0x53f80400 0x0200>;
|
|
interrupts = <16>;
|
|
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
|
|
fsl,usbmisc = <&usbmisc 2>;
|
|
dr_mode = "host";
|
|
status = "disabled";
|
|
};
|
|
|
|
usbh3: usb@53f80600 {
|
|
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
|
|
reg = <0x53f80600 0x0200>;
|
|
interrupts = <17>;
|
|
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
|
|
fsl,usbmisc = <&usbmisc 3>;
|
|
dr_mode = "host";
|
|
status = "disabled";
|
|
};
|
|
|
|
usbmisc: usbmisc@53f80800 {
|
|
#index-cells = <1>;
|
|
compatible = "fsl,imx53-usbmisc";
|
|
reg = <0x53f80800 0x200>;
|
|
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
|
|
};
|
|
|
|
gpio1: gpio@53f84000 {
|
|
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
|
|
reg = <0x53f84000 0x4000>;
|
|
interrupts = <50 51>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio2: gpio@53f88000 {
|
|
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
|
|
reg = <0x53f88000 0x4000>;
|
|
interrupts = <52 53>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio3: gpio@53f8c000 {
|
|
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
|
|
reg = <0x53f8c000 0x4000>;
|
|
interrupts = <54 55>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio4: gpio@53f90000 {
|
|
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
|
|
reg = <0x53f90000 0x4000>;
|
|
interrupts = <56 57>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
kpp: kpp@53f94000 {
|
|
compatible = "fsl,imx53-kpp", "fsl,imx21-kpp";
|
|
reg = <0x53f94000 0x4000>;
|
|
interrupts = <60>;
|
|
clocks = <&clks IMX5_CLK_DUMMY>;
|
|
status = "disabled";
|
|
};
|
|
|
|
wdog1: wdog@53f98000 {
|
|
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
|
|
reg = <0x53f98000 0x4000>;
|
|
interrupts = <58>;
|
|
clocks = <&clks IMX5_CLK_DUMMY>;
|
|
};
|
|
|
|
wdog2: wdog@53f9c000 {
|
|
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
|
|
reg = <0x53f9c000 0x4000>;
|
|
interrupts = <59>;
|
|
clocks = <&clks IMX5_CLK_DUMMY>;
|
|
status = "disabled";
|
|
};
|
|
|
|
gpt: timer@53fa0000 {
|
|
compatible = "fsl,imx53-gpt", "fsl,imx31-gpt";
|
|
reg = <0x53fa0000 0x4000>;
|
|
interrupts = <39>;
|
|
clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
|
|
<&clks IMX5_CLK_GPT_HF_GATE>;
|
|
clock-names = "ipg", "per";
|
|
};
|
|
|
|
srtc: rtc@53fa4000 {
|
|
compatible = "fsl,imx53-rtc";
|
|
reg = <0x53fa4000 0x4000>;
|
|
interrupts = <24>;
|
|
clocks = <&clks IMX5_CLK_SRTC_GATE>;
|
|
};
|
|
|
|
iomuxc: iomuxc@53fa8000 {
|
|
compatible = "fsl,imx53-iomuxc";
|
|
reg = <0x53fa8000 0x4000>;
|
|
};
|
|
|
|
gpr: iomuxc-gpr@53fa8000 {
|
|
compatible = "fsl,imx53-iomuxc-gpr", "syscon";
|
|
reg = <0x53fa8000 0xc>;
|
|
};
|
|
|
|
ldb: ldb@53fa8008 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx53-ldb";
|
|
reg = <0x53fa8008 0x4>;
|
|
gpr = <&gpr>;
|
|
clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
|
|
<&clks IMX5_CLK_LDB_DI1_SEL>,
|
|
<&clks IMX5_CLK_IPU_DI0_SEL>,
|
|
<&clks IMX5_CLK_IPU_DI1_SEL>,
|
|
<&clks IMX5_CLK_LDB_DI0_GATE>,
|
|
<&clks IMX5_CLK_LDB_DI1_GATE>;
|
|
clock-names = "di0_pll", "di1_pll",
|
|
"di0_sel", "di1_sel",
|
|
"di0", "di1";
|
|
status = "disabled";
|
|
|
|
lvds-channel@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0>;
|
|
status = "disabled";
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
|
|
lvds0_in: endpoint {
|
|
remote-endpoint = <&ipu_di0_lvds0>;
|
|
};
|
|
};
|
|
};
|
|
|
|
lvds-channel@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <1>;
|
|
status = "disabled";
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
|
|
lvds1_in: endpoint {
|
|
remote-endpoint = <&ipu_di1_lvds1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
pwm1: pwm@53fb4000 {
|
|
#pwm-cells = <2>;
|
|
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
|
|
reg = <0x53fb4000 0x4000>;
|
|
clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
|
|
<&clks IMX5_CLK_PWM1_HF_GATE>;
|
|
clock-names = "ipg", "per";
|
|
interrupts = <61>;
|
|
};
|
|
|
|
pwm2: pwm@53fb8000 {
|
|
#pwm-cells = <2>;
|
|
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
|
|
reg = <0x53fb8000 0x4000>;
|
|
clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
|
|
<&clks IMX5_CLK_PWM2_HF_GATE>;
|
|
clock-names = "ipg", "per";
|
|
interrupts = <94>;
|
|
};
|
|
|
|
uart1: serial@53fbc000 {
|
|
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
|
|
reg = <0x53fbc000 0x4000>;
|
|
interrupts = <31>;
|
|
clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
|
|
<&clks IMX5_CLK_UART1_PER_GATE>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma 18 4 0>, <&sdma 19 4 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
uart2: serial@53fc0000 {
|
|
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
|
|
reg = <0x53fc0000 0x4000>;
|
|
interrupts = <32>;
|
|
clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
|
|
<&clks IMX5_CLK_UART2_PER_GATE>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
can1: can@53fc8000 {
|
|
compatible = "fsl,imx53-flexcan";
|
|
reg = <0x53fc8000 0x4000>;
|
|
interrupts = <82>;
|
|
clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
|
|
<&clks IMX5_CLK_CAN1_SERIAL_GATE>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
can2: can@53fcc000 {
|
|
compatible = "fsl,imx53-flexcan";
|
|
reg = <0x53fcc000 0x4000>;
|
|
interrupts = <83>;
|
|
clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
|
|
<&clks IMX5_CLK_CAN2_SERIAL_GATE>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
src: src@53fd0000 {
|
|
compatible = "fsl,imx53-src", "fsl,imx51-src";
|
|
reg = <0x53fd0000 0x4000>;
|
|
#reset-cells = <1>;
|
|
};
|
|
|
|
clks: ccm@53fd4000{
|
|
compatible = "fsl,imx53-ccm";
|
|
reg = <0x53fd4000 0x4000>;
|
|
interrupts = <0 71 0x04 0 72 0x04>;
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
gpio5: gpio@53fdc000 {
|
|
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
|
|
reg = <0x53fdc000 0x4000>;
|
|
interrupts = <103 104>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio6: gpio@53fe0000 {
|
|
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
|
|
reg = <0x53fe0000 0x4000>;
|
|
interrupts = <105 106>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
gpio7: gpio@53fe4000 {
|
|
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
|
|
reg = <0x53fe4000 0x4000>;
|
|
interrupts = <107 108>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
i2c3: i2c@53fec000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
|
|
reg = <0x53fec000 0x4000>;
|
|
interrupts = <64>;
|
|
clocks = <&clks IMX5_CLK_I2C3_GATE>;
|
|
status = "disabled";
|
|
};
|
|
|
|
uart4: serial@53ff0000 {
|
|
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
|
|
reg = <0x53ff0000 0x4000>;
|
|
interrupts = <13>;
|
|
clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
|
|
<&clks IMX5_CLK_UART4_PER_GATE>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma 2 4 0>, <&sdma 3 4 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
};
|
|
|
|
aips@60000000 { /* AIPS2 */
|
|
compatible = "fsl,aips-bus", "simple-bus";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
reg = <0x60000000 0x10000000>;
|
|
ranges;
|
|
|
|
aipstz2: bridge@63f00000 {
|
|
compatible = "fsl,imx53-aipstz";
|
|
reg = <0x63f00000 0x60>;
|
|
};
|
|
|
|
iim: iim@63f98000 {
|
|
compatible = "fsl,imx53-iim", "fsl,imx27-iim";
|
|
reg = <0x63f98000 0x4000>;
|
|
interrupts = <69>;
|
|
clocks = <&clks IMX5_CLK_IIM_GATE>;
|
|
};
|
|
|
|
uart5: serial@63f90000 {
|
|
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
|
|
reg = <0x63f90000 0x4000>;
|
|
interrupts = <86>;
|
|
clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
|
|
<&clks IMX5_CLK_UART5_PER_GATE>;
|
|
clock-names = "ipg", "per";
|
|
dmas = <&sdma 16 4 0>, <&sdma 17 4 0>;
|
|
dma-names = "rx", "tx";
|
|
status = "disabled";
|
|
};
|
|
|
|
owire: owire@63fa4000 {
|
|
compatible = "fsl,imx53-owire", "fsl,imx21-owire";
|
|
reg = <0x63fa4000 0x4000>;
|
|
clocks = <&clks IMX5_CLK_OWIRE_GATE>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ecspi2: ecspi@63fac000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
|
|
reg = <0x63fac000 0x4000>;
|
|
interrupts = <37>;
|
|
clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
|
|
<&clks IMX5_CLK_ECSPI2_PER_GATE>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
sdma: sdma@63fb0000 {
|
|
compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
|
|
reg = <0x63fb0000 0x4000>;
|
|
interrupts = <6>;
|
|
clocks = <&clks IMX5_CLK_SDMA_GATE>,
|
|
<&clks IMX5_CLK_SDMA_GATE>;
|
|
clock-names = "ipg", "ahb";
|
|
#dma-cells = <3>;
|
|
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
|
|
};
|
|
|
|
cspi: cspi@63fc0000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
|
|
reg = <0x63fc0000 0x4000>;
|
|
interrupts = <38>;
|
|
clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
|
|
<&clks IMX5_CLK_CSPI_IPG_GATE>;
|
|
clock-names = "ipg", "per";
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c2: i2c@63fc4000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
|
|
reg = <0x63fc4000 0x4000>;
|
|
interrupts = <63>;
|
|
clocks = <&clks IMX5_CLK_I2C2_GATE>;
|
|
status = "disabled";
|
|
};
|
|
|
|
i2c1: i2c@63fc8000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
|
|
reg = <0x63fc8000 0x4000>;
|
|
interrupts = <62>;
|
|
clocks = <&clks IMX5_CLK_I2C1_GATE>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ssi1: ssi@63fcc000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
|
|
"fsl,imx21-ssi";
|
|
reg = <0x63fcc000 0x4000>;
|
|
interrupts = <29>;
|
|
clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
|
|
<&clks IMX5_CLK_SSI1_ROOT_GATE>;
|
|
clock-names = "ipg", "baud";
|
|
dmas = <&sdma 28 0 0>,
|
|
<&sdma 29 0 0>;
|
|
dma-names = "rx", "tx";
|
|
fsl,fifo-depth = <15>;
|
|
status = "disabled";
|
|
};
|
|
|
|
audmux: audmux@63fd0000 {
|
|
compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
|
|
reg = <0x63fd0000 0x4000>;
|
|
status = "disabled";
|
|
};
|
|
|
|
nfc: nand@63fdb000 {
|
|
compatible = "fsl,imx53-nand";
|
|
reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
|
|
interrupts = <8>;
|
|
clocks = <&clks IMX5_CLK_NFC_GATE>;
|
|
status = "disabled";
|
|
};
|
|
|
|
ssi3: ssi@63fe8000 {
|
|
#sound-dai-cells = <0>;
|
|
compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
|
|
"fsl,imx21-ssi";
|
|
reg = <0x63fe8000 0x4000>;
|
|
interrupts = <96>;
|
|
clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
|
|
<&clks IMX5_CLK_SSI3_ROOT_GATE>;
|
|
clock-names = "ipg", "baud";
|
|
dmas = <&sdma 46 0 0>,
|
|
<&sdma 47 0 0>;
|
|
dma-names = "rx", "tx";
|
|
fsl,fifo-depth = <15>;
|
|
status = "disabled";
|
|
};
|
|
|
|
fec: ethernet@63fec000 {
|
|
compatible = "fsl,imx53-fec", "fsl,imx25-fec";
|
|
reg = <0x63fec000 0x4000>;
|
|
interrupts = <87>;
|
|
clocks = <&clks IMX5_CLK_FEC_GATE>,
|
|
<&clks IMX5_CLK_FEC_GATE>,
|
|
<&clks IMX5_CLK_FEC_GATE>;
|
|
clock-names = "ipg", "ahb", "ptp";
|
|
status = "disabled";
|
|
};
|
|
|
|
tve: tve@63ff0000 {
|
|
compatible = "fsl,imx53-tve";
|
|
reg = <0x63ff0000 0x1000>;
|
|
interrupts = <92>;
|
|
clocks = <&clks IMX5_CLK_TVE_GATE>,
|
|
<&clks IMX5_CLK_IPU_DI1_SEL>;
|
|
clock-names = "tve", "di_sel";
|
|
status = "disabled";
|
|
|
|
port {
|
|
tve_in: endpoint {
|
|
remote-endpoint = <&ipu_di1_tve>;
|
|
};
|
|
};
|
|
};
|
|
|
|
vpu: vpu@63ff4000 {
|
|
compatible = "fsl,imx53-vpu", "cnm,coda7541";
|
|
reg = <0x63ff4000 0x1000>;
|
|
interrupts = <9>;
|
|
clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
|
|
<&clks IMX5_CLK_VPU_GATE>;
|
|
clock-names = "per", "ahb";
|
|
resets = <&src 1>;
|
|
iram = <&ocram>;
|
|
};
|
|
|
|
sahara: crypto@63ff8000 {
|
|
compatible = "fsl,imx53-sahara";
|
|
reg = <0x63ff8000 0x4000>;
|
|
interrupts = <19 20>;
|
|
clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
|
|
<&clks IMX5_CLK_SAHARA_IPG_GATE>;
|
|
clock-names = "ipg", "ahb";
|
|
};
|
|
};
|
|
|
|
ocram: sram@f8000000 {
|
|
compatible = "mmio-sram";
|
|
reg = <0xf8000000 0x20000>;
|
|
clocks = <&clks IMX5_CLK_OCRAM>;
|
|
};
|
|
};
|
|
};
|