Devendra Naga c0fc208e48 tty: max3100: use module_spi_driver ... the driver's module init and exit functions can be replaced with module_spi_driver as they do only spi_register_driver and spi_unregister_driver in module's init and exit paths. Signed-off-by: Devendra Naga <develkernel412222@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2012-09-05 12:33:39 -07:00
..
8250	8250: add AgeStar AS-PRS2-009	2012-08-16 11:53:14 -07:00
cpm_uart
jsm	tty: move the termios object into the tty	2012-07-16 13:00:41 -07:00
21285.c
68328serial.c	TTY: use tty_port_link_device	2012-08-13 16:50:19 -07:00
altera_jtaguart.c
altera_uart.c
amba-pl010.c	drivers/tty/serial/amba-pl0{10,11}.c: use clk_prepare_enable and clk_disable_unprepare	2012-09-05 12:33:39 -07:00
amba-pl011.c	drivers/tty/serial/amba-pl0{10,11}.c: use clk_prepare_enable and clk_disable_unprepare	2012-09-05 12:33:39 -07:00
apbuart.c
apbuart.h
ar933x_uart.c
atmel_serial.c
bcm63xx_uart.c
bfin_sport_uart.c
bfin_sport_uart.h
bfin_uart.c	tty: move the termios object into the tty	2012-07-16 13:00:41 -07:00
clps711x.c	ARM: clps711x: Using a single definition for the PHYS and VIRT registers offset	2012-05-11 16:18:01 +02:00
crisv10.c	TTY: use tty_port_link_device	2012-08-13 16:50:19 -07:00
crisv10.h
dz.c
dz.h
efm32-uart.c
icom.c
icom.h
ifx6x60.c	Merge 3.6-rc3 into tty-next	2012-08-27 07:13:33 -07:00
ifx6x60.h
imx.c	Merge tty-next into 3.6-rc1	2012-08-06 09:48:31 -07:00
ioc3_serial.c
ioc4_serial.c	tty: move the termios object into the tty	2012-07-16 13:00:41 -07:00
ip22zilog.c
ip22zilog.h
Kconfig	Merge 3.6-rc3 into tty-next	2012-08-27 07:13:33 -07:00
kgdboc.c
lantiq.c	SERIAL: MIPS: lantiq: implement OF support	2012-05-21 14:31:54 +01:00
lpc32xx_hs.c	serial: Add driver for LPC32xx High Speed UARTs	2012-06-12 15:48:01 -07:00
m32r_sio_reg.h
m32r_sio.c
m32r_sio.h
Makefile	serial: New serial driver MAX310X	2012-08-16 12:12:25 -07:00
max310x.c	serial: New serial driver MAX310X	2012-08-16 12:12:25 -07:00
max3100.c	tty: max3100: use module_spi_driver	2012-09-05 12:33:39 -07:00
mcf.c
mfd.c
mpc52xx_uart.c
mpsc.c
mrst_max3110.c
mrst_max3110.h
msm_serial_hs.c
msm_serial.c
msm_serial.h
msm_smd_tty.c	TTY: use tty_port_register_device	2012-08-13 16:50:19 -07:00
mux.c
mxs-auart.c	serial: mxs-auart: fix the wrong RTS hardware flow control	2012-08-16 12:15:33 -07:00
netx-serial.c
nwpserial.c
of_serial.c	serial/of-serial: Add LPC3220 standard UART compatible string	2012-07-26 13:37:02 -07:00
omap-serial.c	OMAP/serial: Add support for driving a GPIO as DTR.	2012-08-16 12:10:43 -07:00
pch_uart.c	pch_uart: check kzalloc result in dma_handle_tx()	2012-08-16 12:10:16 -07:00
pmac_zilog.c	pmac_zilog,kdb: Fix console poll hook to return instead of loop	2012-08-16 12:20:20 -07:00
pmac_zilog.h
pnx8xxx_uart.c
pxa.c	serial: pxa: add spin lock for console write	2012-06-15 15:04:49 -07:00
sa1100.c
samsung.c	serial: samsung: Fixed wrong comparison for baudclk_rate	2012-07-26 13:37:02 -07:00
samsung.h
sb1250-duart.c	SERIAL: MIPS Swarm sb1250-duart.c driver needs module.h	2012-05-15 17:48:50 +02:00
sc26xx.c	serial: sc26xx: Fix compile breakage	2012-08-16 12:10:16 -07:00
serial_core.c	TTY: use tty_port_register_device	2012-08-13 16:50:19 -07:00
serial_ks8695.c
serial_txx9.c	serial: fix serial_txx9.c build warning/typo	2012-06-12 15:41:18 -07:00
sh-sci.c	serial: sh-sci: fix compilation breakage, when DMA is enabled	2012-08-01 13:48:54 +09:00
sh-sci.h
sirfsoc_uart.c
sirfsoc_uart.h
sn_console.c
suncore.c
sunhv.c
sunsab.c
sunsab.h
sunsu.c
sunzilog.c
sunzilog.h
timbuart.c
timbuart.h
uartlite.c	uartlite: remove IRQF_SAMPLE_RANDOM which is now a no-op	2012-07-19 10:39:42 -04:00
ucc_uart.c
vr41xx_siu.c
vt8500_serial.c
xilinx_uartps.c
zs.c	SERIAL: MIPS DECstation zs.c driver needs module.h	2012-05-15 17:48:50 +02:00
zs.h