mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-11 20:06:44 +07:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
124 lines
4.1 KiB
C
124 lines
4.1 KiB
C
/* Driver for SCM Microsystems USB-ATAPI cable
|
|
* Header File
|
|
*
|
|
* $Id: shuttle_usbat.h,v 1.5 2000/09/17 14:44:52 groovyjava Exp $
|
|
*
|
|
* Current development and maintenance by:
|
|
* (c) 2000 Robert Baruch (autophile@dol.net)
|
|
* (c) 2004, 2005 Daniel Drake <dsd@gentoo.org>
|
|
*
|
|
* See shuttle_usbat.c for more explanation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2, or (at your option) any
|
|
* later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License along
|
|
* with this program; if not, write to the Free Software Foundation, Inc.,
|
|
* 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#ifndef _USB_SHUTTLE_USBAT_H
|
|
#define _USB_SHUTTLE_USBAT_H
|
|
|
|
/* Supported device types */
|
|
#define USBAT_DEV_HP8200 0x01
|
|
#define USBAT_DEV_FLASH 0x02
|
|
|
|
#define USBAT_EPP_PORT 0x10
|
|
#define USBAT_EPP_REGISTER 0x30
|
|
#define USBAT_ATA 0x40
|
|
#define USBAT_ISA 0x50
|
|
|
|
/* Commands (need to be logically OR'd with an access type */
|
|
#define USBAT_CMD_READ_REG 0x00
|
|
#define USBAT_CMD_WRITE_REG 0x01
|
|
#define USBAT_CMD_READ_BLOCK 0x02
|
|
#define USBAT_CMD_WRITE_BLOCK 0x03
|
|
#define USBAT_CMD_COND_READ_BLOCK 0x04
|
|
#define USBAT_CMD_COND_WRITE_BLOCK 0x05
|
|
#define USBAT_CMD_WRITE_REGS 0x07
|
|
|
|
/* Commands (these don't need an access type) */
|
|
#define USBAT_CMD_EXEC_CMD 0x80
|
|
#define USBAT_CMD_SET_FEAT 0x81
|
|
#define USBAT_CMD_UIO 0x82
|
|
|
|
/* Methods of accessing UIO register */
|
|
#define USBAT_UIO_READ 1
|
|
#define USBAT_UIO_WRITE 0
|
|
|
|
/* Qualifier bits */
|
|
#define USBAT_QUAL_FCQ 0x20 // full compare
|
|
#define USBAT_QUAL_ALQ 0x10 // auto load subcount
|
|
|
|
/* USBAT Flash Media status types */
|
|
#define USBAT_FLASH_MEDIA_NONE 0
|
|
#define USBAT_FLASH_MEDIA_CF 1
|
|
|
|
/* USBAT Flash Media change types */
|
|
#define USBAT_FLASH_MEDIA_SAME 0
|
|
#define USBAT_FLASH_MEDIA_CHANGED 1
|
|
|
|
/* USBAT ATA registers */
|
|
#define USBAT_ATA_DATA 0x10 // read/write data (R/W)
|
|
#define USBAT_ATA_FEATURES 0x11 // set features (W)
|
|
#define USBAT_ATA_ERROR 0x11 // error (R)
|
|
#define USBAT_ATA_SECCNT 0x12 // sector count (R/W)
|
|
#define USBAT_ATA_SECNUM 0x13 // sector number (R/W)
|
|
#define USBAT_ATA_LBA_ME 0x14 // cylinder low (R/W)
|
|
#define USBAT_ATA_LBA_HI 0x15 // cylinder high (R/W)
|
|
#define USBAT_ATA_DEVICE 0x16 // head/device selection (R/W)
|
|
#define USBAT_ATA_STATUS 0x17 // device status (R)
|
|
#define USBAT_ATA_CMD 0x17 // device command (W)
|
|
#define USBAT_ATA_ALTSTATUS 0x0E // status (no clear IRQ) (R)
|
|
|
|
/* USBAT User I/O Data registers */
|
|
#define USBAT_UIO_EPAD 0x80 // Enable Peripheral Control Signals
|
|
#define USBAT_UIO_CDT 0x40 // Card Detect (Read Only)
|
|
// CDT = ACKD & !UI1 & !UI0
|
|
#define USBAT_UIO_1 0x20 // I/O 1
|
|
#define USBAT_UIO_0 0x10 // I/O 0
|
|
#define USBAT_UIO_EPP_ATA 0x08 // 1=EPP mode, 0=ATA mode
|
|
#define USBAT_UIO_UI1 0x04 // Input 1
|
|
#define USBAT_UIO_UI0 0x02 // Input 0
|
|
#define USBAT_UIO_INTR_ACK 0x01 // Interrupt (ATA & ISA)/Acknowledge (EPP)
|
|
|
|
/* USBAT User I/O Enable registers */
|
|
#define USBAT_UIO_DRVRST 0x80 // Reset Peripheral
|
|
#define USBAT_UIO_ACKD 0x40 // Enable Card Detect
|
|
#define USBAT_UIO_OE1 0x20 // I/O 1 set=output/clr=input
|
|
// If ACKD=1, set OE1 to 1 also.
|
|
#define USBAT_UIO_OE0 0x10 // I/O 0 set=output/clr=input
|
|
#define USBAT_UIO_ADPRST 0x01 // Reset SCM chip
|
|
|
|
/* USBAT Features */
|
|
#define USBAT_FEAT_ETEN 0x80 // External trigger enable
|
|
#define USBAT_FEAT_U1 0x08
|
|
#define USBAT_FEAT_U0 0x04
|
|
#define USBAT_FEAT_ET1 0x02
|
|
#define USBAT_FEAT_ET2 0x01
|
|
|
|
extern int usbat_transport(struct scsi_cmnd *srb, struct us_data *us);
|
|
extern int init_usbat(struct us_data *us);
|
|
|
|
struct usbat_info {
|
|
int devicetype;
|
|
|
|
/* Used for Flash readers only */
|
|
unsigned long sectors; // total sector count
|
|
unsigned long ssize; // sector size in bytes
|
|
|
|
unsigned char sense_key;
|
|
unsigned long sense_asc; // additional sense code
|
|
unsigned long sense_ascq; // additional sense code qualifier
|
|
};
|
|
|
|
#endif
|