mirror of
https://github.com/AuxXxilium/linux_dsm_epyc7002.git
synced 2024-12-11 09:56:44 +07:00
b0d0ce8b6b
Add DMA support to the MSIOF driver using platform data. As MSIOF DMA is limited to 32-bit words (requiring byte/wordswapping for smaller wordsizes), and the group length is limited to 256 words, DMA is performed on two fixed pages, allocated and mapped at driver initialization time. Performance figures (in Mbps) on r8a7791/koelsch at different SPI clock frequencies for 1024-byte and 4096-byte transfers: 1024 bytes 4096 bytes - 3.25 MHz: PIO 2.1, DMA 2.6 | PIO 2.8, DMA 3.1 - 6.5 MHz: PIO 3.2, DMA 4.4 | PIO 5.0, DMA 5.9 - 13 MHz: PIO 4.2, DMA 6.6 | PIO 8.2, DMA 10.7 - 26 MHz: PIO 5.9, DMA 10.4 | PIO 12.4, DMA 18.4 Note that DMA is only faster than PIO for transfers that exceed the FIFO size (typically 64 words / 256 bytes). Also note that large transfers (larger than the group length for DMA, or larger than the FIFO size for PIO), should use cs-gpio (with the appropriate pinmux setup), as the hardware chipselect will be deasserted in between chunks. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@linaro.org>
13 lines
235 B
C
13 lines
235 B
C
#ifndef __SPI_SH_MSIOF_H__
|
|
#define __SPI_SH_MSIOF_H__
|
|
|
|
struct sh_msiof_spi_info {
|
|
int tx_fifo_override;
|
|
int rx_fifo_override;
|
|
u16 num_chipselect;
|
|
unsigned int dma_tx_id;
|
|
unsigned int dma_rx_id;
|
|
};
|
|
|
|
#endif /* __SPI_SH_MSIOF_H__ */
|